| PAT-ADD LE 1075 | Patcham LTD | PAT-ADD LE 1075 is leveling additive and multipurpose interfacial tension modifier for printing inks and paint formulations. It is silicone and fluorine free and highly suitable for eliminating coating surface defects. Main benefits are: improved substrat...展开 PAT-ADD LE 1075 is leveling additive and multipurpose interfacial tension modifier for printing inks and paint formulations. It is silicone and fluorine free and highly suitable for eliminating coating surface defects. Main benefits are: improved substrate wetting, optimized wetting and adhesion, easy incorporation, add and mix, low surface tension in water (0,5%): approximately 33mNm, free of silicones: no adverse effect on intercoat adhesion. 收起 | Request Sample |
| PAT-ADD LE 1433 | Patcham LTD | PAT-ADD LE 1433 is a flow and leveling additive for waterborne and polar solvent clears as well as pigmented formulations. It contributes to appealing film performances, even in coatings applied to low surface energy substrates; optimizing substrate wetti...展开 PAT-ADD LE 1433 is a flow and leveling additive for waterborne and polar solvent clears as well as pigmented formulations. It contributes to appealing film performances, even in coatings applied to low surface energy substrates; optimizing substrate wetting, dearation, and crater resistance. Main benefits are: contributes to optimal film appearance and DOI, highly effective surface tension control, reduces risk for cratering, pin-holing, orange peel, provides optimal flow and leveling on low surface energy substrates, and promotes air release while retaining recoat properties. 收起 | Request Sample |
| PAT-ADD LE 1477 | Patcham LTD | PAT-ADD LE 1477 is flow and leveling additive for solvent-borne clear and pigmented coating formulations. It benefits coatings applied to low surface energy substrates, optimizing substrate wetting, deaeration, and preventing craters. Main benefits are: o...展开 PAT-ADD LE 1477 is flow and leveling additive for solvent-borne clear and pigmented coating formulations. It benefits coatings applied to low surface energy substrates, optimizing substrate wetting, deaeration, and preventing craters. Main benefits are: optimal film appearance, highly effective surface tension reducer, prevents cratering, pin-holing, orange peel; optimal flow and leveling on low surface energy substrates, air release without impact on recoat. 收起 | Request Sample |
| PAT-ADD P 7212 | Patcham LTD | PAT-ADD P 7212 is a controlled flocculating pigment wetting and dispersing additive for PVC plastisol. It acts as a wetting and dispersing agent for preventing pigment agglomeration and sedimentation. | Request Sample |
| PAT-ADD P 7215 | Patcham LTD | PAT-ADD P 7215 is a controlled flocculating pigment wetting and dispersing additive for PVC plastisol. It acts as a wetting and dispersing agent for preventing pigment agglomeration and sedimentation. | Request Sample |
| PAT-ADD RHEOL 100 | Patcham LTD | PAT-ADD RHEOL 100 is HEUR based liquid rheology modifier for aqueous systems. This product contains low volatile organic components. PAT-ADD RHEOL 100 provides excellent anti-settling and anti-sagging properties while reducing risk of roller spattering du...展开 PAT-ADD RHEOL 100 is HEUR based liquid rheology modifier for aqueous systems. This product contains low volatile organic components. PAT-ADD RHEOL 100 provides excellent anti-settling and anti-sagging properties while reducing risk of roller spattering during application. It is supplied in ready for use form and easily incorporated. Main benefits are: low VOC, contributes to excellent flow and leveling, excellent shelf stability, reduces risk of roller spattering during application, liquid, ready-for-use: manufacturing friendly, and designed for high PVC systems up to gloss emulsion paints and varnishes. 收起 | Request Sample |
| PAT-ADD RHEOL 125P | Patcham LTD | PAT-ADD RHEOL 125P is HEUR based liquid rheology modifier for use in aqueous systems. The product contains low volatile organic components. It demonstrates excellent anti-settling and anti-sagging properties and reduces the risk of roller spattering durin...展开 PAT-ADD RHEOL 125P is HEUR based liquid rheology modifier for use in aqueous systems. The product contains low volatile organic components. It demonstrates excellent anti-settling and anti-sagging properties and reduces the risk of roller spattering during paint application. This product is provided as ready for use. Main benefits are: low VOC, contributes to excellent sag resistance, excellent shelf stability, liquid, ready-for-use: thus optimal workability, neutral and stable in modest alkaline and acidic systems, and good flow, gloss and atomization for spray application. 收起 | Request Sample |
| PAT-ADD RHEOL 99 | Patcham LTD | PAT-ADD RHEOL 99 is HEUR based liquid rheology modifier for aqueous systems. PAT-ADD RHEOL 99 demonstrates excellent anti-settling and anti-sagging properties and reduces the risk of roller spattering during paint application. Moreover, the product is sup...展开 PAT-ADD RHEOL 99 is HEUR based liquid rheology modifier for aqueous systems. PAT-ADD RHEOL 99 demonstrates excellent anti-settling and anti-sagging properties and reduces the risk of roller spattering during paint application. Moreover, the product is superior to classic rheology modifiers in water resistance and salt-spray of the dry film. This product is ready for use and easy to incorporate. Main benefits are: provides excellent flow and leveling, excellent shelf stability, reduces risk of roller spattering during application, supplied as liquid, easy to dose/handle/incorporate, hydrophobic nature, for excellent film scrub and water resistance, and designed for high PVC systems to gloss emulsion paints and varnishes. 收起 | Request Sample |
| PAT-ADD RHEOL253 | Patcham LTD | PAT-ADD RHEOL253 is a liquid rheology modifier for use in thermoset resins and gelcoats. It contributes to the formation of a stable thixottropic structure and reduces risk of sagging and separation. The product demonstrates excellent compatibility with a...展开 PAT-ADD RHEOL253 is a liquid rheology modifier for use in thermoset resins and gelcoats. It contributes to the formation of a stable thixottropic structure and reduces risk of sagging and separation. The product demonstrates excellent compatibility with a wide variety of composite polymer systems. 收起 | Request Sample |
| PAT-ADD SL 1120 | Patcham LTD | PAT-ADD SL 1120是一种增加滑爽度助剂和流平剂，适用于溶剂型涂料。PAT-ADD SL 1120主要用于工业涂料。PAT-ADD SL 1120的应用非常全面，能有效的在不同溶剂型体系中获得最优的滑爽性，耐磨损性能，并提高流动性和流平性 | Request Sample |
| PAT-ADD SU 420 | Patcham LTD | PAT-ADD SU 420 is a nonionic surface active additive that provides excellent wetting and dispersing in aqueous systems. Pat-Add SU 420 also acts as a defoamer. Due to its multifunctional properties, this product provides performance benefits in many appli...展开 PAT-ADD SU 420 is a nonionic surface active additive that provides excellent wetting and dispersing in aqueous systems. Pat-Add SU 420 also acts as a defoamer. Due to its multifunctional properties, this product provides performance benefits in many applications, such as paints, inks, adhesives and other chemical formulations. PAT-ADD SU 420 is an easy to use, solvent-free liquid. Main benefits are: easy workability, excellent pigment wetting properties, does not contribute to foam stabilization, strong reduction of surface tension in aqueous systems, lower water solubility, and aids flow and leveling. 收起 | Request Sample |
| PAT-ADD SU 440 | Patcham LTD | PAT-ADD SU 440 is a nonionic surface active agent for excellent wetting and dispersing in aqueous systems with minimum foam. Due to its multifunctional properties, this product provides performance benefits in many applications, such as paints, inks, adhe...展开 PAT-ADD SU 440 is a nonionic surface active agent for excellent wetting and dispersing in aqueous systems with minimum foam. Due to its multifunctional properties, this product provides performance benefits in many applications, such as paints, inks, adhesives and other chemical formulations. Its main applications are in WB industrial paints, inks and adhesives. Main benefits are: excellent pigment wetting properties, does not contribute to foam formation, strong reduction of surface tension in aqueous systems, lower water solubility,low use levels, and improved flow and leveling. 收起 | Request Sample |
| PAT-ADD SU 4A | Patcham LTD | PAT-ADD SU 4A provides performance benefits in many applications; in paints, inks, adhesives and other chemical formulations. Used as a defoaming and wetting agent. This solvent composition of this product is 2-ethylhexanol. | Request Sample |
| PAT-ADD SU 4BC | Patcham LTD | PAT-ADD SU 4BC provides performance benefits in many applications; in paints, inks, adhesives and other chemical formulations. Used as a defoaming and wetting agent. This solvent composition of this product is 2-butoxy ethanol. | Request Sample |
| PAT-ADD SU 4DPM | Patcham LTD | PAT-ADD SU 4DPM provides performance benefits in many applications; in paints, inks, adhesives and other chemical formulations. Used as a defoaming and wetting agent. This solvent composition of this product is 2-Methoxymethylethoxypropanol. | Request Sample |
| PAT-ADD SU 4E | Patcham LTD | PAT-ADD SU 4E provides performance benefits in many applications; in paints, inks, adhesives and other chemical formulations. Used as a defoaming and wetting agent. This solvent composition of this product is Ethylene glycol. | Request Sample |
| PAT-ADD SU 4H | Patcham LTD | PAT-ADD SU 4H provides performance benefits in many applications; in paints, inks, adhesives and other chemical formulations. Used as a defoaming and wetting agent. This solvent composition of this product is Ethylene glycol. | Request Sample |
| PAT-ADD SU 4PA | Patcham LTD | PAT-ADD SU 4PA provides performance benefits in many applications; in paints, inks, adhesives and other chemical formulations. Used as a defoaming and wetting agent. This solvent composition of this product is 2-Propanol. | Request Sample |
| PAT-ADD SU 4PG | Patcham LTD | PAT-ADD SU 4PG provides performance benefits in many applications; in paints, inks, adhesives and other chemical formulations. Used as a defoaming and wetting agent. This solvent composition of this product is propylene glycol. | Request Sample |
| PAT-ADD U 7510 | Patcham LTD | PAT-ADD U 7510 is a wetting and dispersing additive to prevent flooding and floatation of epoxy and vinyl ester/unsaturated polyester based composited. Prevents settling of pigments and fillers. | Request Sample |
| PAT-ADD VR7001 | Patcham LTD | PAT-ADD VR7001 is a medium-high volatile universally recommended aliphatic hydrocarbon viscosity depressant with acidic wetting and dispersing elements for PVC plastisols. It keeps the plastisol workable over long period of storage and significantly lower...展开 PAT-ADD VR7001 is a medium-high volatile universally recommended aliphatic hydrocarbon viscosity depressant with acidic wetting and dispersing elements for PVC plastisols. It keeps the plastisol workable over long period of storage and significantly lowers the viscosity build up. 收起 | Request Sample |
| PAT-ADD VR7005 | Patcham LTD | PAT-ADD VR7005 is a universally recommended high volatile hydrocarbon-based viscosity depressant for PVC plastisols. It keeps the plastisol workable over long period of storage and significantly lowers the viscosity build up. | Request Sample |
| PAT-ADD VR7006N | Patcham LTD | PAT-ADD VR7006N is a universally recommended medium volatile hydrocarbon-based viscosity depressant for PVC plastisols. It keeps the plastisol workable over long period of storage and markedly lowers the viscosity build up. | Request Sample |
| PAT-ADD VR7007 | Patcham LTD | PAT-ADD VR7007 is APEO-free universally recommended medium volatile hydrocarbon-based viscosity depressant for PVC plastisols. It keeps the plastisol workable over long period of storage and markedly lowers the viscosity build up. | Request Sample |
| PAT-ADD VR7008 | Patcham LTD | PAT-ADD VR7008 is a combination of a viscosity depressant and wetting agent, which will reduce the viscosity of PVC plastisol in the low shear range. It keeps the plastisol workable over long period of storage and markedly lowers the viscosity build up. | Request Sample |
| PATOX Manganese Octoate 6% WB | Patcham LTD | PATOX Manganese Octoate 6% WB is a clear reddish brown liquid. It can be used as a drying catalyst. | Request Sample |
| PATOX WB 102 | Patcham LTD | PATOX WB 102 is (Co/Zn/Zr) water dispersible drying catalyst for use in waterborne, air-drying paints. It is based on metal carboxylates, thus offering catalytic properties similar to the effect of the traditionally used driers in solvent borne air-drying...展开 PATOX WB 102 is (Co/Zn/Zr) water dispersible drying catalyst for use in waterborne, air-drying paints. It is based on metal carboxylates, thus offering catalytic properties similar to the effect of the traditionally used driers in solvent borne air-drying paints; however, the products excel in waterborne paints in offering superior compatibility, workability and performance properties. 收起 | Request Sample |
| PATOX WB 103 | Patcham LTD | PATOX WB 102 is (Co/Ba/Zr) water dispersible drying catalyst for use in waterborne, air-drying paints. It is based on metal carboxylates, thus offering catalytic properties similar to the effect of the traditionally used driers in solvent borne air-drying...展开 PATOX WB 102 is (Co/Ba/Zr) water dispersible drying catalyst for use in waterborne, air-drying paints. It is based on metal carboxylates, thus offering catalytic properties similar to the effect of the traditionally used driers in solvent borne air-drying paints; however, the products excel in waterborne paints in offering superior compatibility, workability and performance properties. 收起 | Request Sample |
| Pentaerythritol | Penpet Petrochemical Trading GmbH | Pentaerythritol, in the form of a white, crystalline, and odourless powder, is a component of resin esters that can be used in paints, coatings, printing inks, varnishes, floor coverings, and adhesives. This product has a molar mass of 136.15 and a densi...展开 Pentaerythritol, in the form of a white, crystalline, and odourless powder, is a component of resin esters that can be used in paints, coatings, printing inks, varnishes, floor coverings, and adhesives. This product has a molar mass of 136.15 and a density of 1.396 g/cm3. Its melting point is defined at 260.5°C and its boiling point is at 276°C. 收起 | |
| Phthalic Anhydride (PA) | Penpet Petrochemical Trading GmbH | Phthalic Anhydride (PA) in the form of a colourless flake, is an organic compound that can be used in surface coatings. This product is an important raw material that can often serve as a plasticizer in plastics, dyestuffs, and synthetic resins. | |
| Sodium Formate | Penpet Petrochemical Trading GmbH | Sodium Formate is the sodium salt of formic acid. This product appears as a colourless powder that can be used in printing processes. Its melting point is -94.7 degrees Celsius and it boils between 55.8 and 56.6 degrees C. | |
| Sodium Stearate | Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.) | Sodium Stearate is a white powder that has a sodium content of 7.5%. This product is often used in paints, coatings and inks. | |
| Strontium Octoate 10% | Patcham LTD | Strontium Octoate 10% is a clear liquid used in conjunction with primary driers to ensure a balanced drying process of both the surface and body of the film. It is a good through drier. | Request Sample |
| Tetrahydrofurane (THF) | Penpet Petrochemical Trading GmbH | Tetrahydrofurane (THF), in the form of a colourless fluid with an ether-like odor, is an organic solvent that can be used in the production of enamels and adhesives. This product is normally an intermediate in the production of polyamide, polyester and p...展开 Tetrahydrofurane (THF), in the form of a colourless fluid with an ether-like odor, is an organic solvent that can be used in the production of enamels and adhesives. This product is normally an intermediate in the production of polyamide, polyester and polyurethane. 收起 | |
| Tetrahydrophthalic Anhydride (THPA) | Penpet Petrochemical Trading GmbH | Tetrahydrophthalic Anhydride (THPA), in the form of a white crystalline powder, is created from the reaction of butadiene with maleic anhydride. This product can be used in adhesives and as an intermediate for alkyd resins. | |
| Toluene-Diisocyanate (TDI) | Penpet Petrochemical Trading GmbH | Toluene-Diisocyanate (TDI) is a clear, colourless to yellowish liquid or solid, depending on the ambient temperature. This product is an aromatic diisocyanate that can be used in varnishes and adhesives. It is an important intermediate in the plastics i...展开 Toluene-Diisocyanate (TDI) is a clear, colourless to yellowish liquid or solid, depending on the ambient temperature. This product is an aromatic diisocyanate that can be used in varnishes and adhesives. It is an important intermediate in the plastics industry that is normally used in high-end lacquers and coatings. 收起 | |
| Trimellitic Anhydride (TMA) | Penpet Petrochemical Trading GmbH | Trimellitic Anhydride (TMA), in the form of a white crystalline flake, is a dicarboxylic acid produced from the oxidation of 1,2,4-Trimethylbenzene that can be used in the manufacture of wire enamels. This product is normally used for the production of P...展开 Trimellitic Anhydride (TMA), in the form of a white crystalline flake, is a dicarboxylic acid produced from the oxidation of 1,2,4-Trimethylbenzene that can be used in the manufacture of wire enamels. This product is normally used for the production of PVC plasticizers, polyester and polyamide resins, polyurethane resin, and as a curing agent for epoxies. 收起 | |
| Trimethylolpropane (TMP) | Penpet Petrochemical Trading GmbH | Trimethylolpropane (TMP), in the form of a clear crystalline flake, is an alcohol produced by the reaction of formaldehyde with n-butyraldehyde. This product is an intermediate and a triol that can be used in glues and polyurethane coatings. It is also ...展开 Trimethylolpropane (TMP), in the form of a clear crystalline flake, is an alcohol produced by the reaction of formaldehyde with n-butyraldehyde. This product is an intermediate and a triol that can be used in glues and polyurethane coatings. It is also known as hexaglycerol. 收起 | |
| Trimethylolpropane (TMP), Liquid | Penpet Petrochemical Trading GmbH | Trimethylolpropane (TMP), in the form of a clear colorless liquid, is an alcohol produced by the reaction of formaldehyde with n-butyraldehyde. This product is an intermediate and a triol that can be used in glues and polyurethane coatings. It is also k...展开 Trimethylolpropane (TMP), in the form of a clear colorless liquid, is an alcohol produced by the reaction of formaldehyde with n-butyraldehyde. This product is an intermediate and a triol that can be used in glues and polyurethane coatings. It is also known as hexaglycerol. 收起 | |
| Triphenylphosphite (TPP) | Penpet Petrochemical Trading GmbH | Triphenylphosphite (TPP), in the form of a colourless liquid or solid (depending on ambient temperature) is the ester of phosphorous acid and phenol. This product is normally an antioxidant, but it can be used in lubricant additives and adhesives. | |
| Zinc Neo 16% (in BD) | Patcham LTD | Zinc Neo 16% (in BD) is used as a secondary drier in conjunction with primary driers to ensure a balanced drying process of both the surface and body of the film. Zinc is a strong through drier. It slows surface dry slightly and gives harder films. | Request Sample |
| Zinc Octoate 12% | Patcham LTD | 辛酸锌（ZINC OCTOATE） 12%用作油漆催干剂 | Request Sample |
| Zinc Octoate 16% | Patcham LTD | 辛酸锌（ZINC OCTOATE） 16%用作油漆催干剂 | Request Sample |
| Zinc Octoate 18% | Patcham LTD | 辛酸锌（ZINC OCTOATE） 18%用作油漆催干剂 | Request Sample |
| Zinc Octoate 18% (in D80) | Patcham LTD | Zinc Octoate 18% (in D80) is used as a secondary drier in conjunction with primary driers to ensure a balanced drying process of both the surface and body of the film. Zinc is a strong through drier. It slows surface dry slightly and gives harder films. | Request Sample |
| Zinc Octoate 8% | Patcham LTD | 辛酸锌（ZINC OCTOATE） 8%用作油漆催干剂 | Request Sample |
| Zirconium Neo 18% (in BD) | Patcham LTD | Zirconium Neo 18% (in BD) is used as a secondary drier in conjunction with primary driers to ensure a balanced drying process of both the surface and body of the film. Zirconium is a powerful through drier and is the most widely used. | Request Sample |
| Zirconium Octoate 10% | Patcham LTD | 辛酸锆（ZIRCONIUM OCTOATE） 10%用作油漆催干剂 | Request Sample |
| Zirconium Octoate 12% | Patcham LTD | 辛酸锆（ZIRCONIUM OCTOATE） 12%用作油漆催干剂 | Request Sample |
| Zirconium Octoate 12% (in D80) | Patcham LTD | Zirconium Octoate 12% (in D80) is used as a secondary drier in conjunction with primary driers to ensure a balanced drying process of both the surface and body of the film. Zirconium is a powerful through drier and is the most widely used. | Request Sample |
| Zirconium Octoate 18% | Patcham LTD | 辛酸锆（ZIRCONIUM OCTOATE） 18%用作油漆催干剂 | Request Sample |
| Zirconium Octoate 18% (in D80) | Patcham LTD | Zirconium Octoate 18% (in D80) is used as a secondary drier in conjunction with primary driers to ensure a balanced drying process of both the surface and body of the film. Zirconium is a powerful through drier and is the most widely used. | Request Sample |
| Zirconium Octoate 24% | Patcham LTD | 辛酸锆（ZIRCONIUM OCTOATE） 24%用作油漆催干剂 | Request Sample |
| Zirconium Octoate 6% | Patcham LTD | 辛酸锆（ZIRCONIUM OCTOATE） 6%用作油漆催干剂 | Request Sample |
| Aluminum Silicate, Extender Slurries (Formulation #21-10006) | Patcham LTD | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing f...展开 Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm / gauge 7+ NS. 收起 | |
| Calcium Carbonate, Extender Slurries (Formulation #21-10006) | Patcham LTD | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing f...展开 Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm/ gauge 7+ NS. 收起 | |
| Interior/Exterior Gloss Paint (Formulation #21-10005) | Patcham LTD | Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...展开 Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved- 7+ NS/ <10 μm. 收起 | |
| Interior/Exterior Matt Paint (Formulation #21-10005) | Patcham LTD | Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...展开 Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved. 5+ NS/ min. of 20 μm. 收起 | |
| Interior/Exterior Semi Glossy Paint Waterborne Coatings (Formulation #21-10005) | Patcham LTD | Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...展开 Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved. -7 NS/ min. of 15 μm. 收起 | |
| Solventborne 2K PU White Topcoat (Formulation #21-20001) | Patcham LTD | This solventborne 2K PU white topcoat features Pat-Add DA 1801. It is suitable for general industrial coatings, wood coatings, and auto refinish coatings. | |
| Talc, Extender Slurries (Formulation #21-10006) | Patcham LTD | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...展开 Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm / gauge 7+ NS. 收起 | |
| Waterborne Epoxy Primer (Formulation #21- 10001) | Patcham LTD | This waterborne epoxy primer features Pat-Add DA 817. It is suitable for general industrial coatings. | |
| Zinc Oxide, Extender Slurries (Formulation #21-10006) | Patcham LTD | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...展开 Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm / gauge 7+ NS. 收起 |
