| Toluene-Diisocyanate (TDI) | Penpet Petrochemical Trading GmbH | Toluene-Diisocyanate (TDI) is a clear, colourless to yellowish liquid or solid, depending on the ambient temperature. This product is an aromatic diisocyanate that can be used in varnishes and adhesives. It is an important intermediate in the plastics i...展开 Toluene-Diisocyanate (TDI) is a clear, colourless to yellowish liquid or solid, depending on the ambient temperature. This product is an aromatic diisocyanate that can be used in varnishes and adhesives. It is an important intermediate in the plastics industry that is normally used in high-end lacquers and coatings. 收起 | |
| Trimellitic Anhydride (TMA) | Penpet Petrochemical Trading GmbH | Trimellitic Anhydride (TMA), in the form of a white crystalline flake, is a dicarboxylic acid produced from the oxidation of 1,2,4-Trimethylbenzene that can be used in the manufacture of wire enamels. This product is normally used for the production of P...展开 Trimellitic Anhydride (TMA), in the form of a white crystalline flake, is a dicarboxylic acid produced from the oxidation of 1,2,4-Trimethylbenzene that can be used in the manufacture of wire enamels. This product is normally used for the production of PVC plasticizers, polyester and polyamide resins, polyurethane resin, and as a curing agent for epoxies. 收起 | |
| Trimethylolpropane (TMP) | Penpet Petrochemical Trading GmbH | Trimethylolpropane (TMP), in the form of a clear crystalline flake, is an alcohol produced by the reaction of formaldehyde with n-butyraldehyde. This product is an intermediate and a triol that can be used in glues and polyurethane coatings. It is also ...展开 Trimethylolpropane (TMP), in the form of a clear crystalline flake, is an alcohol produced by the reaction of formaldehyde with n-butyraldehyde. This product is an intermediate and a triol that can be used in glues and polyurethane coatings. It is also known as hexaglycerol. 收起 | |
| Trimethylolpropane (TMP), Liquid | Penpet Petrochemical Trading GmbH | Trimethylolpropane (TMP), in the form of a clear colorless liquid, is an alcohol produced by the reaction of formaldehyde with n-butyraldehyde. This product is an intermediate and a triol that can be used in glues and polyurethane coatings. It is also k...展开 Trimethylolpropane (TMP), in the form of a clear colorless liquid, is an alcohol produced by the reaction of formaldehyde with n-butyraldehyde. This product is an intermediate and a triol that can be used in glues and polyurethane coatings. It is also known as hexaglycerol. 收起 | |
| Triphenylphosphite (TPP) | Penpet Petrochemical Trading GmbH | Triphenylphosphite (TPP), in the form of a colourless liquid or solid (depending on ambient temperature) is the ester of phosphorous acid and phenol. This product is normally an antioxidant, but it can be used in lubricant additives and adhesives. | |
| Zinc Neo 16% (in BD) | Patcham LTD | Zinc Neo 16% (in BD) is used as a secondary drier in conjunction with primary driers to ensure a balanced drying process of both the surface and body of the film. Zinc is a strong through drier. It slows surface dry slightly and gives harder films. | Request Sample |
| Zinc Octoate 12% | Patcham LTD | 辛酸锌（ZINC OCTOATE） 12%用作油漆催干剂 | Request Sample |
| Zinc Octoate 16% | Patcham LTD | 辛酸锌（ZINC OCTOATE） 16%用作油漆催干剂 | Request Sample |
| Zinc Octoate 18% | Patcham LTD | 辛酸锌（ZINC OCTOATE） 18%用作油漆催干剂 | Request Sample |
| Zinc Octoate 18% (in D80) | Patcham LTD | Zinc Octoate 18% (in D80) is used as a secondary drier in conjunction with primary driers to ensure a balanced drying process of both the surface and body of the film. Zinc is a strong through drier. It slows surface dry slightly and gives harder films. | Request Sample |
| Zinc Octoate 8% | Patcham LTD | 辛酸锌（ZINC OCTOATE） 8%用作油漆催干剂 | Request Sample |
| Zirconium Neo 18% (in BD) | Patcham LTD | Zirconium Neo 18% (in BD) is used as a secondary drier in conjunction with primary driers to ensure a balanced drying process of both the surface and body of the film. Zirconium is a powerful through drier and is the most widely used. | Request Sample |
| Zirconium Octoate 10% | Patcham LTD | 辛酸锆（ZIRCONIUM OCTOATE） 10%用作油漆催干剂 | Request Sample |
| Zirconium Octoate 12% | Patcham LTD | 辛酸锆（ZIRCONIUM OCTOATE） 12%用作油漆催干剂 | Request Sample |
| Zirconium Octoate 12% (in D80) | Patcham LTD | Zirconium Octoate 12% (in D80) is used as a secondary drier in conjunction with primary driers to ensure a balanced drying process of both the surface and body of the film. Zirconium is a powerful through drier and is the most widely used. | Request Sample |
| Zirconium Octoate 18% | Patcham LTD | 辛酸锆（ZIRCONIUM OCTOATE） 18%用作油漆催干剂 | Request Sample |
| Zirconium Octoate 18% (in D80) | Patcham LTD | Zirconium Octoate 18% (in D80) is used as a secondary drier in conjunction with primary driers to ensure a balanced drying process of both the surface and body of the film. Zirconium is a powerful through drier and is the most widely used. | Request Sample |
| Zirconium Octoate 24% | Patcham LTD | 辛酸锆（ZIRCONIUM OCTOATE） 24%用作油漆催干剂 | Request Sample |
| Zirconium Octoate 6% | Patcham LTD | 辛酸锆（ZIRCONIUM OCTOATE） 6%用作油漆催干剂 | Request Sample |
| Aluminum Silicate, Extender Slurries (Formulation #21-10006) | Patcham LTD | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing f...展开 Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm / gauge 7+ NS. 收起 | |
| Calcium Carbonate, Extender Slurries (Formulation #21-10006) | Patcham LTD | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing f...展开 Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm/ gauge 7+ NS. 收起 | |
| Interior/Exterior Gloss Paint (Formulation #21-10005) | Patcham LTD | Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...展开 Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved- 7+ NS/ <10 μm. 收起 | |
| Interior/Exterior Matt Paint (Formulation #21-10005) | Patcham LTD | Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...展开 Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved. 5+ NS/ min. of 20 μm. 收起 | |
| Interior/Exterior Semi Glossy Paint Waterborne Coatings (Formulation #21-10005) | Patcham LTD | Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...展开 Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved. -7 NS/ min. of 15 μm. 收起 | |
| Solventborne 2K PU White Topcoat (Formulation #21-20001) | Patcham LTD | This solventborne 2K PU white topcoat features Pat-Add DA 1801. It is suitable for general industrial coatings, wood coatings, and auto refinish coatings. | |
| Talc, Extender Slurries (Formulation #21-10006) | Patcham LTD | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...展开 Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm / gauge 7+ NS. 收起 | |
| Waterborne Epoxy Primer (Formulation #21- 10001) | Patcham LTD | This waterborne epoxy primer features Pat-Add DA 817. It is suitable for general industrial coatings. | |
| Zinc Oxide, Extender Slurries (Formulation #21-10006) | Patcham LTD | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...展开 Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm / gauge 7+ NS. 收起 |
