Amorphic™ A450 | Bunge Amorphic Solutions, LLC. | Amorphic™ A450 is an engineered aluminum phosphate complex designed for general purpose corrosion control. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechan...展开 Amorphic™ A450 is an engineered aluminum phosphate complex designed for general purpose corrosion control. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is often used in interior, exterior, and marine applications. 收起 | |
Amorphic™ A950 | Bunge Amorphic Solutions, LLC. | Amorphic™ A950 is an engineered aluminum phosphate complex designed to extend the service life of protective coatings in critical service applications in interior, exterior, and marine environments. This product provides a balance of anodic passivation, d...展开 Amorphic™ A950 is an engineered aluminum phosphate complex designed to extend the service life of protective coatings in critical service applications in interior, exterior, and marine environments. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is often used in coatings and high performance binder systems. 收起 | |
Amorphic™ C120 | Bunge Amorphic Solutions, LLC. | Amorphic™ C120 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechan...展开 Amorphic™ C120 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is used in decorative and general purpose paints and coatings, polyester coil primer and topcoat, and automotive refinish primer. 收起 | |
Amorphic™ I200 | Bunge Amorphic Solutions, LLC. | Amorphic™ I200 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechan...展开 Amorphic™ I200 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is used in decorative and general purpose paints and coatings, polyester coil primer and topcoat, and automotive refinish primer. 收起 | |
Amorphic™ I700 | Bunge Amorphic Solutions, LLC. | Amorphic™ I700 is a general purpose corrosion inhibitor that maximizes water absorption and minimizes water diffusion through coating films. This product can be used as an alternative to chrome pigments, and is also used in coil coating, automotive OEM, a...展开 Amorphic™ I700 is a general purpose corrosion inhibitor that maximizes water absorption and minimizes water diffusion through coating films. This product can be used as an alternative to chrome pigments, and is also used in coil coating, automotive OEM, and refinish applications. 收起 | |
Desmocolor Black PU, VPA 503/1 | mk chemicals | Desmocolor Black PU, VPA 503/1 is a black colored pasty to liquid pigment. It has a pigment content of 15%, an organic solvents value of 35%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that ar...展开 Desmocolor Black PU, VPA 503/1 is a black colored pasty to liquid pigment. It has a pigment content of 15%, an organic solvents value of 35%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
Desmocolor Concrete Grey, VPA 275/14 | mk chemicals | Desmocolor Concrete Grey, VPA 275/14 is a grey colored pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 20.6%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings ...展开 Desmocolor Concrete Grey, VPA 275/14 is a grey colored pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 20.6%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
Desmocolor Cream White, VPA 275/1 | mk chemicals | Desmocolor Cream White, VPA 275/1 is a white colored pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 19%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that...展开 Desmocolor Cream White, VPA 275/1 is a white colored pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 19%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
Desmocolor Grey White, VPA 275/2 | mk chemicals | Desmocolor Grey White, VPA 275/2 is a pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 19%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on ro...展开 Desmocolor Grey White, VPA 275/2 is a pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 19%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
Desmocolor Nut Brown, VPA 275/10 | mk chemicals | Desmocolor Nut Brown, VPA 275/10 is a brown colored pasty to liquid pigment. It has a pigment content of 58%, an organic solvents value of 26%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that ...展开 Desmocolor Nut Brown, VPA 275/10 is a brown colored pasty to liquid pigment. It has a pigment content of 58%, an organic solvents value of 26%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
Desmocolor Olive Green, VPA 275/15 | mk chemicals | Desmocolor Olive Green, VPA 275/15 is a green colored pasty to liquid pigment. It has a pigment content of 69%, an organic solvents value of 17%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings tha...展开 Desmocolor Olive Green, VPA 275/15 is a green colored pasty to liquid pigment. It has a pigment content of 69%, an organic solvents value of 17%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
Desmocolor Pebble Grey, VPA 275/4 | mk chemicals | Desmocolor Pebble Grey, VPA 275/4 is a grey colored pasty to liquid pigment. It has a pigment content of 67.3%, an organic solvents value of 18.3%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings t...展开 Desmocolor Pebble Grey, VPA 275/4 is a grey colored pasty to liquid pigment. It has a pigment content of 67.3%, an organic solvents value of 18.3%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
Desmocolor White PU, VPA 434 | mk chemicals | Desmocolor White PU, VPA 434 is a white colored pasty to liquid pigment. It has a pigment content of 70%, an organic solvents value of 14%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are ...展开 Desmocolor White PU, VPA 434 is a white colored pasty to liquid pigment. It has a pigment content of 70%, an organic solvents value of 14%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
DEXICRYL 036B | DEX-VIN POLYMERS PVT LTD | DEXICRYL 036B is a vinyl acetate-butyl acrylate copolymer emulsion. This product appears as a milky white, free-flowing dispersion. It can be used in highly pigmented interior and exterior emulsion paints. | |
DEXICRYL 0590D | DEX-VIN POLYMERS PVT LTD | DEXICRYL 0590D is an aqueous dispersion of a styrene acrylic copolymer. This product has a high binding power, which allows it to be used in primer formulations, liquid membranes, textured finishes, and sealants. It can be used in building adhesives and...展开 DEXICRYL 0590D is an aqueous dispersion of a styrene acrylic copolymer. This product has a high binding power, which allows it to be used in primer formulations, liquid membranes, textured finishes, and sealants. It can be used in building adhesives and primers as well. 收起 | |
DEXICRYL 0591D | DEX-VIN POLYMERS PVT LTD | DEXICRYL 0591D is an aqueous dispersion of an acrylic ester-styrene copolymer. This product's high binding power makes it suitable for use in manufacturing primers, liquid membranes, textured finishes, and sealants. It can also be used in tile adhesives...展开 DEXICRYL 0591D is an aqueous dispersion of an acrylic ester-styrene copolymer. This product's high binding power makes it suitable for use in manufacturing primers, liquid membranes, textured finishes, and sealants. It can also be used in tile adhesives and panel adhesives. 收起 | |
DEXICRYL 07V03 H (Hard) | DEX-VIN POLYMERS PVT LTD | DEXICRL 07V03 H (Hard) is an aqueous dispersion of a VAM VEOVA 10 copolymer. This product's high binding power makes it suitable for the manufacture of primers, textured finishes and sealants. It can be used to make building adhesives, such as tile or p...展开 DEXICRL 07V03 H (Hard) is an aqueous dispersion of a VAM VEOVA 10 copolymer. This product's high binding power makes it suitable for the manufacture of primers, textured finishes and sealants. It can be used to make building adhesives, such as tile or panel adhesives. 收起 | |
DEXICRYL 07V03 S (Soft) | DEX-VIN POLYMERS PVT LTD | DEXICRYL 07V03 S (Soft) is an aqueous dispersion of a VAM VEOVA 10 copolymer. This product's high binding power makes it suitable for the manufacture of primers, textured finishes and sealants. It is primarily used to make building adhesives, such as ti...展开 DEXICRYL 07V03 S (Soft) is an aqueous dispersion of a VAM VEOVA 10 copolymer. This product's high binding power makes it suitable for the manufacture of primers, textured finishes and sealants. It is primarily used to make building adhesives, such as tile or panel adhesives. 收起 | |
DEXICRYL 16V03 | DEX-VIN POLYMERS PVT LTD | DEXICRYL 16V03 is an aqueous dispersion of a VAM VEOVA 10 co-polymer. This product's high binding power makes it suitable for use in the manufacture of primers, textured finishes, and sealants. It is primarily used in building adhesives such as tile or ...展开 DEXICRYL 16V03 is an aqueous dispersion of a VAM VEOVA 10 co-polymer. This product's high binding power makes it suitable for use in the manufacture of primers, textured finishes, and sealants. It is primarily used in building adhesives such as tile or panel adhesives. 收起 | |
DEXICRYL 3082 | DEX-VIN POLYMERS PVT LTD | DEXICRYL 3082 is a 100% acrylic emulsion with a large particle size. This product appears as a milky white acrylic co-polymer dispersion in water. It can be used in exterior and interior paint applications. DEXICRYL 3082 provides excellent resistance to...展开 DEXICRYL 3082 is a 100% acrylic emulsion with a large particle size. This product appears as a milky white acrylic co-polymer dispersion in water. It can be used in exterior and interior paint applications. DEXICRYL 3082 provides excellent resistance to heat, light, and UV radiation. 收起 | |
DEXICRYL 3082 LC | DEX-VIN POLYMERS PVT LTD | DEXICRYL 2082 LC is a pure acrylic emulsion with a high molecular weight. This product appears as a bluish wihte acrylic copolymer dispersion in a water solution. It can be used as a binder in cement, in plastic emulsion paints, and acrylic distempers i...展开 DEXICRYL 2082 LC is a pure acrylic emulsion with a high molecular weight. This product appears as a bluish wihte acrylic copolymer dispersion in a water solution. It can be used as a binder in cement, in plastic emulsion paints, and acrylic distempers in order to improve the water-resistance and sheen of the coatings. 收起 | |
DEXICRYL 492D | DEX-VIN POLYMERS PVT LTD | DEXICRYL 492D is an aqueous dispersion of an acrylic ester-styrene copolymer. This product's high binding power makes it suitable for use in the manufacture of primers, liquid membranes, textured finishes, and sealants. It can also be used in tile and p...展开 DEXICRYL 492D is an aqueous dispersion of an acrylic ester-styrene copolymer. This product's high binding power makes it suitable for use in the manufacture of primers, liquid membranes, textured finishes, and sealants. It can also be used in tile and panel adhesives. 收起 | |
DEXICRYL CML | DEX-VIN POLYMERS PVT LTD | DEXICRYL CML is an aqueous dispersion of an acrylic ter-polymer. This product provides light stability, weathering, and acid and alkali resistance. It can be used in gloss paints, primers, texture finishes, binders for clear aggregate coatings, and adhe...展开 DEXICRYL CML is an aqueous dispersion of an acrylic ter-polymer. This product provides light stability, weathering, and acid and alkali resistance. It can be used in gloss paints, primers, texture finishes, binders for clear aggregate coatings, and adhesives. 收起 | |
DEXICRYL D 034 | DEX-VIN POLYMERS PVT LTD | DEXICRYL D 034 is an acrylic-based dispersant. This product appears as a clear to pale yellow liquid. It can be used in clay slurries for paints and paper coatings. It can also be used in textile printings when pigments and fillers are used in preparin...展开 DEXICRYL D 034 is an acrylic-based dispersant. This product appears as a clear to pale yellow liquid. It can be used in clay slurries for paints and paper coatings. It can also be used in textile printings when pigments and fillers are used in preparing printing pastes. 收起 | |
DEXICRYL EM 3072 | DEX-VIN POLYMERS PVT LTD | DEXICRYL EM 3072 is an acrylic emulsion with a fine particle size. This product appears as a milky white, free-flowing dispersion. It can be used to make interior, exterior and road marking coatings and paints with good alkaline resistance. | |
DEXICRYL G 301 | DEX-VIN POLYMERS PVT LTD | DEXICRYL G 301 is an ammoniac polyacrylate solution. This product appears as a light yellow, viscous liquid. It can be used as a rheology modifier for plastic emulsion paints. It can also be used in high-gloss and semi-gloss paints in order to improve ...展开 DEXICRYL G 301 is an ammoniac polyacrylate solution. This product appears as a light yellow, viscous liquid. It can be used as a rheology modifier for plastic emulsion paints. It can also be used in high-gloss and semi-gloss paints in order to improve brushability. 收起 | |
DEXICRYL S 004 | DEX-VIN POLYMERS PVT LTD | DEXICRYL S 004 is an aqueous styrene acrylic copolymer dispersion. This product is designed to modify hydraulic binders. It can be used in flexible coatings and water-resistant two-component mortars. It can also be used to produce crack-filling systems...展开 DEXICRYL S 004 is an aqueous styrene acrylic copolymer dispersion. This product is designed to modify hydraulic binders. It can be used in flexible coatings and water-resistant two-component mortars. It can also be used to produce crack-filling systems and flexible cementitious coatings for walls. 收起 | |
DEXICRYL TH | DEX-VIN POLYMERS PVT LTD | DEXICRYL TH is a cross-linked acrylic co-polymer dispersion in water. This product appears as a milky white, free-flowing dispersion. It can be used as a thickener in plastic emulsion paints. | |
DEXIVIN 0553 | DEX-VIN POLYMERS PVT LTD | DEXIVIN 0553 is an externally plasticized PVA emulsion. This product appears as a milky white homopolymer in water. It can be used in paints, and the end product will exhibit good water resistance, hiding and whiteness retention. | |
DEXIVIN 3025 | DEX-VIN POLYMERS PVT LTD | DEXIVIN 3025 is a vinyl acetate-2-ethylhexyl acrylate copolymer emulsion. This product appears as a milky white, free-flowing dispersion. It can be used as a binder in water-based paints, but has also been developed especially for cement paints. | |
DEXIVIN 3105 | DEX-VIN POLYMERS PVT LTD | DEXIVIN 3015 is a vinyl acetate and 2-ethylhexyl acrylate copolymer emulsion. This product appears as a milky white, free-flowing dispersion. It can be used as a binder in water-based paints and cement paints. | |
MK Fluo Blue, VPA 596/7 | mk chemicals | MK Fluo Blue, VPA 596/7 is a blue colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
MK Fluo Yellow, VPA 596/3 | mk chemicals | MK Fluo Yellow, VPA 596/3 is a yellow colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
MK-Ecomarker Black, VPA 672/9 | mk chemicals | MK-Ecomarker Black, VPA 672/9 is a black colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.87 grams per cubic centimeter. This product is used in solvent borne paints mainly in...展开 MK-Ecomarker Black, VPA 672/9 is a black colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.87 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
MK-Ecomarker Neon Blue, VPA 672/5 | mk chemicals | MK-Ecomarker Neon Blue, VPA 672/5 is a blue colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.98 grams per cubic centimeter. This product is used in solvent borne paints mainly...展开 MK-Ecomarker Neon Blue, VPA 672/5 is a blue colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.98 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
MK-Ecomarker Neon Green, VPA 672/4 | mk chemicals | MK-Ecomarker Neon Green, VPA 672/4 is a green colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints main...展开 MK-Ecomarker Neon Green, VPA 672/4 is a green colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
MK-Ecomarker Neon Orange, VPA 672/3 | mk chemicals | MK-Ecomarker Neon Orange, VPA 672/3 is an orange colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints m...展开 MK-Ecomarker Neon Orange, VPA 672/3 is an orange colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
MK-Ecomarker Neon Pink, VPA 672/1 | mk chemicals | MK-Ecomarker Neon Pink, VPA 672/1 is a pink colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly...展开 MK-Ecomarker Neon Pink, VPA 672/1 is a pink colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
MK-Ecomarker Neon Red, VPA 672 | mk chemicals | MK-Ecomarker Neon Red, VPA 672 is a red colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in ...展开 MK-Ecomarker Neon Red, VPA 672 is a red colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
MK-Ecomarker Neon Yellow, VPA 672/2 | mk chemicals | MK-Ecomarker Neon Yellow, VPA 672/2 is a yellow colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints ma...展开 MK-Ecomarker Neon Yellow, VPA 672/2 is a yellow colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
MK-Ecomarker White, VPA 672/10 | mk chemicals | MK-Ecomarker White, VPA 672/10 is a white colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 1.06 grams per cubic centimeter. This product is used in solvent borne paints mainly i...展开 MK-Ecomarker White, VPA 672/10 is a white colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 1.06 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
MK-Epoxycolor 102 Sand Yellow | mk chemicals | MK-Epoxycolor 102 Sand Yellow is a yellow colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 111 Brown Beige | mk chemicals | MK-Epoxycolor 111 Brown Beige is a pasty to liquid pigment. It has a pigment content of 44%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 120 Olive Yellow | mk chemicals | MK-Epoxycolor 120 Olive Yellow is a pasty to liquid pigment. It has a pigment content of 47%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 313 Tomato Red | mk chemicals | MK-Epoxycolor 313 Tomato Red is a red colored pasty to liquid pigment. It has a pigment content of 40%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 602 Leaf Green | mk chemicals | MK-Epoxycolor 602 Leaf Green is a green colored pasty to liquid pigment. It has a pigment content of 36%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 621 Pale Green | mk chemicals | MK-Epoxycolor 621 Pale Green is a green colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 700 Squirrel Grey | mk chemicals | MK-Epoxycolor 700 Squirrel Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 723 Concrete Grey | mk chemicals | MK-Epoxycolor 723 Concrete Grey is a grey colored pasty to liquid pigment. It has a pigment content of 49%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 730 Stone Grey | mk chemicals | MK-Epoxycolor 730 Stone Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 731 Blue Grey | mk chemicals | MK-Epoxycolor 731 Blue Grey is a pasty to liquid pigment. It has a pigment content of 48%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 732 Pebble Grey | mk chemicals | MK-Epoxycolor 732 Pebble Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 733 Cement Grey | mk chemicals | MK-Epoxycolor 733 Cement Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 735 Light Grey | mk chemicals | MK-Epoxycolor 735 Light Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 738 Agate Grey | mk chemicals | MK-Epoxycolor 738 Agate Greyis a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor Black P. Bk. 11 | mk chemicals | MK-Epoxycolor Black P. Bk. 11 is a black colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.91 grams per cubic centimeter. This product is used in the preparation...展开 MK-Epoxycolor Black P. Bk. 11 is a black colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.91 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
MK-Epoxycolor Blue P. B. 15:1 | mk chemicals | MK-Epoxycolor Blue P. B. 15:1 is a blue colored pasty to liquid pigment. It has a pigment content of 16%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.21 grams per cubic centimeter. This product is used in the preparation ...展开 MK-Epoxycolor Blue P. B. 15:1 is a blue colored pasty to liquid pigment. It has a pigment content of 16%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.21 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
MK-Epoxycolor Bright Red P. R. 112 | mk chemicals | MK-Epoxycolor Bright Red P. R. 112 is a red colored pasty to liquid pigment. It has a pigment content of 25%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.19 grams per cubic centimeter. This product is used in the preparat...展开 MK-Epoxycolor Bright Red P. R. 112 is a red colored pasty to liquid pigment. It has a pigment content of 25%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.19 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
MK-Epoxycolor Bright Yellow P. Y. 74 | mk chemicals | MK-Epoxycolor Bright Yellow P. Y. 74 is a yellow colored pasty to liquid pigment. It has a pigment of 30%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.28 grams per cubic centimeter. This product is used in the preparation...展开 MK-Epoxycolor Bright Yellow P. Y. 74 is a yellow colored pasty to liquid pigment. It has a pigment of 30%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.28 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
MK-Epoxycolor Green P. G. 17 | mk chemicals | MK-Epoxycolor Green P. G. 17 is a green colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.94 grams per cubic centimeter. This product is used in the preparation ...展开 MK-Epoxycolor Green P. G. 17 is a green colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.94 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
MK-Epoxycolor Red P. R. 101 | mk chemicals | MK-Epoxycolor Red P. R. 101 is a red colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.92 grams per cubic centimeter. This product is used in the preparation of ...展开 MK-Epoxycolor Red P. R. 101 is a red colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.92 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
MK-Epoxycolor White P. W. 6 | mk chemicals | MK-Epoxycolor White P. W. 6 is a white colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.87 grams per cubic centimeter. This product is used in the preparation o...展开 MK-Epoxycolor White P. W. 6 is a white colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.87 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
MK-Epoxycolor Yellow P. Y. 42 | mk chemicals | MK-Epoxycolor Yellow P. Y. 42 is a yellow colored pasty to liquid pigment. It has a pigment content of 40%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.63 grams per cubic centimeter. This product is used in the preparatio...展开 MK-Epoxycolor Yellow P. Y. 42 is a yellow colored pasty to liquid pigment. It has a pigment content of 40%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.63 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
MK-Fluo Green, VPA 596/1 | mk chemicals | MK-Fluo Green, VPA 596/1 is a green colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
MK-Fluo Orange, VPA 596/5 | mk chemicals | MK-Fluo Orange, VPA 596/5 is an orange colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
MK-Fluo Pink, VPA 596/4 | mk chemicals | MK-Fluo Pink, VPA 596/4 is a pink colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
MK-Fluo Red, VPA 596 | mk chemicals | MK-Fluo Red, VPA 596 is a red colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
MK-Hydrocolor Bismuth Vanadate Yellow | mk chemicals | MK-Hydrocolor Bismuth Vanadate Yellow is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 65% ± 1%, and a water value of 32% ± 1%. This product is used in the preparation of inorganic water based pigments tha...展开 MK-Hydrocolor Bismuth Vanadate Yellow is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 65% ± 1%, and a water value of 32% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Black 7, VPA 26 | mk chemicals | MK-Hydrocolor Black 7, VPA 26 is a carbon black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 45% ± 1%, and a water value of 60% ± 1%. This product is used in the preparation of organic water based pigments that ar...展开 MK-Hydrocolor Black 7, VPA 26 is a carbon black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 45% ± 1%, and a water value of 60% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Black P. Bk. 7, VPA 344/12 | mk chemicals | MK-Hydrocolor Black P. Bk. 7, VPA 344/12 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 38% ± 1%, and a water value of 42% ± 1%. This product is used in the preparation of water based pigments that are us...展开 MK-Hydrocolor Black P. Bk. 7, VPA 344/12 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 38% ± 1%, and a water value of 42% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
MK-Hydrocolor Blue 15:1 | mk chemicals | MK-Hydrocolor Blue 15:1 is a blue colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 50% ± 1%, and a water value of 35.5% ± 1%. This product is used in the preparation of organic water based pigments that are used in pa...展开 MK-Hydrocolor Blue 15:1 is a blue colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 50% ± 1%, and a water value of 35.5% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Blue P. B. 15:1, VPA 344/24/1 | mk chemicals | MK-Hydrocolor Blue P. B. 15:1, VPA 344/24/1 is a blue colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 38% ± 1%, and a water value of 45% ± 1%. This product is used in the preparation of water based pigments that are ...展开 MK-Hydrocolor Blue P. B. 15:1, VPA 344/24/1 is a blue colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 38% ± 1%, and a water value of 45% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
MK-Hydrocolor Chromium Oxide Green | mk chemicals | MK-Hydrocolor Chromium Oxide Green is a green colored pasty to liquid pigment. It has a pH value of 7,5 to 9.0, a pigment content of 60% ± 1%, and a water value of 39% ± 1%. This product is used in the preparation of inorganic water based pigments that ar...展开 MK-Hydrocolor Chromium Oxide Green is a green colored pasty to liquid pigment. It has a pH value of 7,5 to 9.0, a pigment content of 60% ± 1%, and a water value of 39% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Fanal Violet 27 | mk chemicals | MK-Hydrocolor Fanal Violet 27 is a purple colored pigment. It has a pH value of 7.0 to 9.0, a pigment content of 25% ± 1%, and a water value of 62% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printin...展开 MK-Hydrocolor Fanal Violet 27 is a purple colored pigment. It has a pH value of 7.0 to 9.0, a pigment content of 25% ± 1%, and a water value of 62% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
MK-Hydrocolor Green 7 | mk chemicals | MK-Hydrocolor Green 7 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 55% ± 1%, and a water value of 39% ± 1%. This product is used in the preparation of organic water based pigments that are used in paint...展开 MK-Hydrocolor Green 7 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 55% ± 1%, and a water value of 39% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Green GN P. G. 17, VPA 344/20 | mk chemicals | MK-Hydrocolor Green GN P. G. 17, VPA 344/20 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 68% ± 1%, and a water value of 22% ± 1%. This product is used in the preparation of water based pigments that are...展开 MK-Hydrocolor Green GN P. G. 17, VPA 344/20 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 68% ± 1%, and a water value of 22% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
MK-Hydrocolor Green P. G. 7, VPA 344/21 | mk chemicals | MK-Hydrocolor Green P. G. 7, VPA 344/21 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 38% ± 1%. This product is used in the preparation of water based pigments that are use...展开 MK-Hydrocolor Green P. G. 7, VPA 344/21 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 38% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
MK-Hydrocolor Iron Oxide Black 306 | mk chemicals | MK-Hydrocolor Iron Oxide Black 306 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that ar...展开 MK-Hydrocolor Iron Oxide Black 306 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Iron Oxide Black 318 | mk chemicals | MK-Hydrocolor Iron Oxide Black 318 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that ar...展开 MK-Hydrocolor Iron Oxide Black 318 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Iron Oxide Red 110 | mk chemicals | MK-Hydrocolor Iron Oxide Red 110 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that are us...展开 MK-Hydrocolor Iron Oxide Red 110 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Iron Oxide Red 130 | mk chemicals | MK-Hydrocolor Iron Oxide Red 130 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 70% ± 1%, and a water value of 20% ± 1%. This product is used in the preparation of inorganic water based pigments that are us...展开 MK-Hydrocolor Iron Oxide Red 130 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 70% ± 1%, and a water value of 20% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Iron Oxide Red 160 | mk chemicals | MK-Hydrocolor Iron Oxide Red 160 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that are us...展开 MK-Hydrocolor Iron Oxide Red 160 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Iron Oxide Yellow 3910 | mk chemicals | MK-Hydrocolor Iron Oxide Yellow 3910 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 35% ± 1%. This product is used in the preparation of inorganic water based pigments that...展开 MK-Hydrocolor Iron Oxide Yellow 3910 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 35% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Iron Oxide Yellow 3920 | mk chemicals | MK-Hydrocolor Iron Oxide Yellow 3920 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 35% ± 1%. This product is used in the preparation of inorganic water based pigments that...展开 MK-Hydrocolor Iron Oxide Yellow 3920 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 35% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Orange 34 | mk chemicals | MK-Hydrocolor Orange 34 is an orange colored pasty to liquid pigment. It has a pH value of7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 53% ± 1%. This product is used in the preparation of organic water based pigments that are used in pa...展开 MK-Hydrocolor Orange 34 is an orange colored pasty to liquid pigment. It has a pH value of7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 53% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Orange 5 | mk chemicals | MK-Hydrocolor Orange 5 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 50% ± 1%, and a water value of 45% ± 1%. This product is used in the preparation of organic water based pigments that are used in pa...展开 MK-Hydrocolor Orange 5 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 50% ± 1%, and a water value of 45% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Orange 943, VPA 344/23/1 | mk chemicals | MK-Hydrocolor Orange 943, VPA 344/23/1 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 57% ± 1%, and a water value of 30% ± 1%. This product is used in the preparation of water based pigments that are us...展开 MK-Hydrocolor Orange 943, VPA 344/23/1 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 57% ± 1%, and a water value of 30% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
MK-Hydrocolor Orange P. O. 67, VPA 344/28 | mk chemicals | MK-Hydrocolor Orange P. O. 67, VPA 344/28 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 37% ± 1%. This product is used in the preparation of water based pigments that are...展开 MK-Hydrocolor Orange P. O. 67, VPA 344/28 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 37% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
MK-Hydrocolor Red 112 | mk chemicals | MK-Hydrocolor Red 112 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 50% ± 1%, and a water value of 43% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints ...展开 MK-Hydrocolor Red 112 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 50% ± 1%, and a water value of 43% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Red 130 M, VPA 344/19 | mk chemicals | MK-Hydrocolor Red 130 M, VPA 344/19 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 65% ± 1%, and a water value of 25% ± 1%. This product is used in the preparation of water based pigments that are used in c...展开 MK-Hydrocolor Red 130 M, VPA 344/19 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 65% ± 1%, and a water value of 25% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
MK-Hydrocolor Red 146 | mk chemicals | MK-Hydrocolor Red 146 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 42% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints ...展开 MK-Hydrocolor Red 146 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 42% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Red P. R. 112, VPA 437/4 | mk chemicals | MK-Hydrocolor Red P. R. 112, VPA 437/4 is a XXX colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 45% ± 1%, and a water value of 41% ± 1%. This product is used in the preparation of water based pigments that are used i...展开 MK-Hydrocolor Red P. R. 112, VPA 437/4 is a XXX colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 45% ± 1%, and a water value of 41% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
MK-Hydrocolor Red P. R. 122, VPA 344/26 | mk chemicals | MK-Hydrocolor Red P. R. 122, VPA 344/26 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 34% ± 1%, and a water value of 43% ± 1%. This product is used in the preparation of water based pigments that are used ...展开 MK-Hydrocolor Red P. R. 122, VPA 344/26 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 34% ± 1%, and a water value of 43% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
MK-Hydrocolor Red P. R. 170, VPA 344/22 | mk chemicals | MK-Hydrocolor Red P. R. 170, VPA 344/22 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 38% ± 1%. This product is used in the preparation of water based pigments that are used ...展开 MK-Hydrocolor Red P. R. 170, VPA 344/22 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 38% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
MK-Hydrocolor Tinting Black WD, VPA 26 | mk chemicals | MK-Hydrocolor Tinting Black WD, VPA 26 is a black colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 0.5%, and a water value of 50% ± 1%. This product is used in the preparation of water based iron o...展开 MK-Hydrocolor Tinting Black WD, VPA 26 is a black colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 0.5%, and a water value of 50% ± 1%. This product is used in the preparation of water based iron oxide pigments that are used in wood stain coatings. 收起 | |
MK-Hydrocolor Tiosorb WD, VPA 78 | mk chemicals | MK-Hydrocolor Tiosorb WD, VPA 78 is a white colored, transparent, pasty to liquid pigment. It has a pigment content of 50% ± 1%, an additives value of 2.7%, and a pH value of 7.0 to 9.0. This product is used in the preparation of water based titanium diox...展开 MK-Hydrocolor Tiosorb WD, VPA 78 is a white colored, transparent, pasty to liquid pigment. It has a pigment content of 50% ± 1%, an additives value of 2.7%, and a pH value of 7.0 to 9.0. This product is used in the preparation of water based titanium dioxide pigments that are used in wood stain coatings as an U.V. absorber. 收起 | |
MK-Hydrocolor Transoxide Orange WD | mk chemicals | MK-Hydrocolor Transoxide Orange WD is an orange colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 6%, and a water value of 40% ± 1%. This product is used in the preparation of water based iron oxide...展开 MK-Hydrocolor Transoxide Orange WD is an orange colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 6%, and a water value of 40% ± 1%. This product is used in the preparation of water based iron oxide pigments that are used in wood stain coatings. 收起 | |
MK-Hydrocolor Transoxide Red WD | mk chemicals | MK-Hydrocolor Transoxide Red WD is a red colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 6.0% ± 1%, and a water value of 34% ± 1%. This product is used in the preparation of water based iron oxide...展开 MK-Hydrocolor Transoxide Red WD is a red colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 6.0% ± 1%, and a water value of 34% ± 1%. This product is used in the preparation of water based iron oxide pigments that are used in wood stain coatings. 收起 | |
MK-Hydrocolor Transoxide Yellow WD | mk chemicals | MK-Hydrocolor Transoxide Yellow WD is a yellow colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 7% ± 1%, and a water value of 45% ± 1%. This product is used in the preparation of water based iron o...展开 MK-Hydrocolor Transoxide Yellow WD is a yellow colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 7% ± 1%, and a water value of 45% ± 1%. This product is used in the preparation of water based iron oxide pigments that are used in wood stain coatings. 收起 | |
MK-Hydrocolor Violet 23 | mk chemicals | MK-Hydrocolor Violet 23 is a purple colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 35% ± 1%, and a water value of 46% ± 1%. This product is used in the preparation of organic water based pigments that are used in pa...展开 MK-Hydrocolor Violet 23 is a purple colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 35% ± 1%, and a water value of 46% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 |