| Epoxy Resin E-10 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-10 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow solid granular powder that has good mechanical and anti-corrosive properties. It can be used in paints and powder coatings. | |
| Epoxy Resin E-12 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-12 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in epoxy polye...展开 Epoxy Resin E-12 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in epoxy polyester powder coatings, or mixed with an amine curing agent for use in anti-corrosion and insulation coatings. 收起 | |
| Epoxy Resin E-14 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-14 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in top-grade e...展开 Epoxy Resin E-14 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in top-grade epoxy polyester powder coatings, electrophoretic paints, and anti-corrosion coatings. 收起 | |
| Epoxy Resin E-20 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-...展开 Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-corrosion coatings, zinc powder primers, floor coatings, decorative coatings and varnishes. 收起 | |
| Epoxy Resin SF801 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatin...展开 Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 450-520 g/eq and a softening point of 65-75°C. 收起 | |
| Epoxy Resin SF801A | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coati...展开 Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 530-570 g/eq and a softening point of 65-75°C. 收起 | |
| Epoxy Resin SF808 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF808 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance and plate leveling capacity. It can be used in top-grade epoxy polyester powder co...展开 Epoxy Resin SF808 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance and plate leveling capacity. It can be used in top-grade epoxy polyester powder coatings, electrophoretic paints, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF818 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF818 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good mechanical performance and electrostatic spraying performance. It can be used in electrophoretic paints, top-grade ep...展开 Epoxy Resin SF818 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good mechanical performance and electrostatic spraying performance. It can be used in electrophoretic paints, top-grade epoxy poleyster powder coatings, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF828 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF828 is a MMW solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance, chemical resistance, and high impact strength. It can be used in electrophoretic ...展开 Epoxy Resin SF828 is a MMW solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance, chemical resistance, and high impact strength. It can be used in electrophoretic paints, top-grade epoxy polyester powder coatings, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF838 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF838 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good chemical resistance, electrostatic spraying performance, and anti-corrosive properties. It can be used in electrophor...展开 Epoxy Resin SF838 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good chemical resistance, electrostatic spraying performance, and anti-corrosive properties. It can be used in electrophoretic paints and anti-corrosion coatings. 收起 | |
| TOYNOL® CATB-61 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® CATB-61, in the form of a transparent yellow liquid, is an alkyne alcohol catalyst that can be used in silicone coatings and adhesives. This product contains above 98% active content. Its boiling point is 150-151℃. | |
| TOYNOL® CATB-72 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® CATB-72, in the form of a transparent yellow liquid, is an alkyne alcohol catalyst that can be used in silicone coatings and adhesives. This product contains above 98% active content. Its boiling point is 170-172℃. | |
| TOYNOL® D-504 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® D-504, in the form of a pale yellow liquid, is a modified acetylenic diol nonionic surfactant. This product can be used as a non-foam wetting agent in water-borne pigments for inkjet inks, water-based pigment pastes, aqueous textile digital print...展开 TOYNOL® D-504, in the form of a pale yellow liquid, is a modified acetylenic diol nonionic surfactant. This product can be used as a non-foam wetting agent in water-borne pigments for inkjet inks, water-based pigment pastes, aqueous textile digital printing inks, water-based coatings, and paper coatings. It is dispersible in water. 收起 | |
| TOYNOL® DF-110B | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-110B, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other us...展开 TOYNOL® DF-110B, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content and its flash point starts above 80℃. 收起 | |
| TOYNOL® DF-220 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-220, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 100% active content and is dispers...展开 TOYNOL® DF-220, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 100% active content and is dispersed in water. 收起 | |
| TOYNOL® DF-220M | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-220M, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 50% active content and is dispers...展开 TOYNOL® DF-220M, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 50% active content and is dispersed in water. 收起 | |
| TOYNOL® DF-220S | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-220S, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 20% active content and is dispers...展开 TOYNOL® DF-220S, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 20% active content and is dispersed in water. 收起 | |
| TOYNOL® DF-58 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-58, in the form of a pale yellow liquid, is a mineral oil. This product is a defoamer and foam controlling agent for water-based coatings, adhesives, printing inks, and paper coatings. It is slightly soluble in water and contains 100% active ...展开 TOYNOL® DF-58, in the form of a pale yellow liquid, is a mineral oil. This product is a defoamer and foam controlling agent for water-based coatings, adhesives, printing inks, and paper coatings. It is slightly soluble in water and contains 100% active content. 收起 | |
| TOYNOL® DF-58S | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-58S, in the form of a pale yellow liquid, is a mineral oil. This product is a defoamer and foam controlling agent for water-based coatings, adhesives, printing inks, and paper coatings. It is slightly soluble in water and contains 100% active...展开 TOYNOL® DF-58S, in the form of a pale yellow liquid, is a mineral oil. This product is a defoamer and foam controlling agent for water-based coatings, adhesives, printing inks, and paper coatings. It is slightly soluble in water and contains 100% active content. 收起 | |
| TOYNOL® DF-59 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-59, in the form of a light-yellow transparent liquid, is an acetylenic diol-modified non-ionic surfactant. This product is a defoamer that can be used in water-based ink and varnishes, aqueous adhesives, water-borne automotive coatings, and pa...展开 TOYNOL® DF-59, in the form of a light-yellow transparent liquid, is an acetylenic diol-modified non-ionic surfactant. This product is a defoamer that can be used in water-based ink and varnishes, aqueous adhesives, water-borne automotive coatings, and paper coatings. This product is dispersible in water. 收起 | |
| TOYNOL® DF-62 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-62, in the form of a translucent liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 30% act...展开 TOYNOL® DF-62, in the form of a translucent liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 30% active content. 收起 | |
| TOYNOL® DF-63 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-63, in the form of a transparent liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 60% act...展开 TOYNOL® DF-63, in the form of a transparent liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 60% active content. 收起 | |
| TOYNOL® DF-64 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-64, in the form of a transparent, pale yellow liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It con...展开 TOYNOL® DF-64, in the form of a transparent, pale yellow liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 60% active content. 收起 | |
| TOYNOL® DF-66 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-66, in the form of a translucent liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 50% act...展开 TOYNOL® DF-66, in the form of a translucent liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 50% active content. 收起 | |
| TOYNOL® DF-68 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-68, in the form of a translucent liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 80% act...展开 TOYNOL® DF-68, in the form of a translucent liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 80% active content. 收起 | |
| TOYNOL® DF-70 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-70, in the form of a pale yellow liquid, is a modified silicone oil and non-ionic alkynol compound surfactant. This product is a defoamer that can be used in water-based adhesives, water-based ink and varnishes, paper coatings, and water-based...展开 TOYNOL® DF-70, in the form of a pale yellow liquid, is a modified silicone oil and non-ionic alkynol compound surfactant. This product is a defoamer that can be used in water-based adhesives, water-based ink and varnishes, paper coatings, and water-based automotive coatings. It contains 30% active content and is slightly soluble in water. 收起 | |
| TOYNOL® DF-72 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-72, in the form of a pale yellow liquid, is a modified silicone oil and non-ionic alkynol compound surfactant. This product is a defoamer that can be used in water-based adhesives, water-based ink and varnishes, paper coatings, and water-based...展开 TOYNOL® DF-72, in the form of a pale yellow liquid, is a modified silicone oil and non-ionic alkynol compound surfactant. This product is a defoamer that can be used in water-based adhesives, water-based ink and varnishes, paper coatings, and water-based automotive coatings. It contains 37% active content and is slightly soluble in water. 收起 | |
| TOYNOL® DF-80B | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-80B, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other use...展开 TOYNOL® DF-80B, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 32% active content and its flash point starts above 80℃. 收起 | |
| TOYNOL® DF-80D | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-80D, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other use...展开 TOYNOL® DF-80D, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 32% active content and its flash point starts above 100℃. 收起 | |
| TOYNOL® DF-80L | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-80L, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other use...展开 TOYNOL® DF-80L, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 20% active content and its flash point starts above 100℃. 收起 | |
| TOYNOL® DF-80PG | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-80PG, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other us...展开 TOYNOL® DF-80PG, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content and its flash point starts above 80℃. 收起 | |
| TOYNOL® DS-121 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DS-121, in the form of a pale yellow liquid, is a dispersant for grinding pigments. This product is low-foaming and stabilizes color pastes well. It can be used in printing inks, coatings and pigment pastes. Its flash point starts above 100℃. | |
| TOYNOL® DS-136 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DS-136, in the form of a brown liquid, is a dispersant for grinding pigments. This product is low-foaming and stabilizes color pastes well. It can be used in printing inks, coatings and in pigment pastes. Its flash point starts above 100℃. | |
| TOYNOL® DS-350 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DS-350, in the form of a pale yellow liquid, is a modified acetylenic diol non-ionic surfactant. This product is a dispersible wetting agent that can be used in paper coatings. It contains 100% active content and is insoluble in water. | |
| TOYNOL® DS-5090 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DS-5090, in the form of a pale yellow liquid, is a modified acetylenic diol non-ionic surfactant. This product is a dispersible wetting agent that can be used in paper coatings. It contains 66% active content. | |
| TOYNOL® DS-8090 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DS-8090, in the form of a pale yellow liquid, is a modified acetylenic diol non-ionic surfactant. This product is a dispersible wetting agent that can be used in paper coatings. It contains 93% active content. | |
| TOYNOL® DS-950 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DS-950, in the form of a pale yellow liquid, is a modified acetylenic diol non-ionic surfactant. This product is a dispersible wetting agent that can be used in paper coatings. It contains 100% active content and is self-dispersing in water. | |
| TOYNOL® DS-960 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DS-960, in the form of a pale yellow liquid, is a modified acetylenic diol non-ionic surfactant. This product is a wetting agent that can be used in waterborne wood coatings, water-based industrial paints, plastic coatings, and glass coatings. I...展开 TOYNOL® DS-960, in the form of a pale yellow liquid, is a modified acetylenic diol non-ionic surfactant. This product is a wetting agent that can be used in waterborne wood coatings, water-based industrial paints, plastic coatings, and glass coatings. It contains 63% active content and is self-dispersing in water. 收起 | |
| TOYNOL® FS-204 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-204, in the form of a waxy solid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, amo...展开 TOYNOL® FS-204, in the form of a waxy solid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 100% active content. 收起 | |
| TOYNOL® FS-204A | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-204A, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coat...展开 TOYNOL® FS-204A, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content. 收起 | |
| TOYNOL® FS-204BC | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-204BC, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coa...展开 TOYNOL® FS-204BC, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content. 收起 | |
| TOYNOL® FS-204DPM | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-204DPM, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick co...展开 TOYNOL® FS-204DPM, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content. 收起 | |
| TOYNOL® FS-204E | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-204E, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coat...展开 TOYNOL® FS-204E, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content. 收起 | |
| TOYNOL® FS-204PA | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-204PA, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coa...展开 TOYNOL® FS-204PA, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content. 收起 | |
| TOYNOL® FS-204PG | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-204PG, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coa...展开 TOYNOL® FS-204PG, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content. 收起 | |
| TOYNOL® FS-500 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-500, in the form of a pale yellow liquid, is a modified acetylenic diol nonionic surfactant. This product can be used as a non-foam wetting agent in water-borne pigments for inkjet inks, water-based pigment pastes, aqueous textile digital prin...展开 TOYNOL® FS-500, in the form of a pale yellow liquid, is a modified acetylenic diol nonionic surfactant. This product can be used as a non-foam wetting agent in water-borne pigments for inkjet inks, water-based pigment pastes, aqueous textile digital printing inks, water-based coatings, and paper coatings. It is dispersible in water. 收起 | |
| TOYNOL® FS-620 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-620, in the form of a pale yellow liquid, is a defoaming wetting agent for waterborne systems. This product can be used in waterborne inks, varnishes, adhesives, and automotive or non-stick coatings. It contains 100% active content. | |
| TOYNOL® FS-640 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-640, in the form of a pale yellow liquid, is a defoaming wetting agent for waterborne systems. This product can be used in waterborne inks, varnishes, adhesives, and automotive or non-stick coatings. It contains 100% active content. | |
| TOYNOL® FS-6502 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-6502, in the form of a pale yellow liquid, is a low-foam wetting agent for waterborne systems. This product can be used in waterborne inks, varnishes, adhesives, and automotive or non-stick coatings. It contains 100% active content. | |
| TOYNOL® FS-660 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-660, in the form of a pale yellow liquid, is a low-foam wetting agent for waterborne systems. This product can be used in waterborne inks, varnishes, adhesives, and automotive or non-stick coatings. It contains 100% active content. | |
| TOYNOL® FS-680 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-680, in the form of a pale yellow liquid, is a low-foam wetting agent for waterborne systems. This product can be used in waterborne inks, varnishes, adhesives, and automotive or non-stick coatings. It contains 100% active content. | |
| TOYNOL® FS-683 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-683, in the form of a pale yellow liquid, is a low-foam wetting agent for waterborne systems. This product can be used in waterborne inks, varnishes, adhesives, and automotive or non-stick coatings. It contains 100% active content. | |
| TOYNOL® PSA | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® PSA, in the form of a pale yellow liquid, is a modified acetylenic diol non-ionic surfactant. This product is a foam control wetting agent that can be used in waterborne composite additives, aqueous pressure-sensitive adhesives, waterborne adhesi...展开 TOYNOL® PSA, in the form of a pale yellow liquid, is a modified acetylenic diol non-ionic surfactant. This product is a foam control wetting agent that can be used in waterborne composite additives, aqueous pressure-sensitive adhesives, waterborne adhesives, and aqueous finishing agents. It contains 50% active content. 收起 | |
| TOYNOL® S-180 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® S-180, in the form of a clear liquid, is a multi-branched alcohol modified surfactant. This product can be used in waterborne inks, water-based varnishes, adhesives, paper coatings, and textile coatings. It contains 63% active content. | |
| TOYNOL® S-182 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® S-182, in the form of a clear liquid, is a multi-branched alcohol modified surfactant. This product can be used in waterborne inks, water-based varnishes, adhesives, paper coatings, and textile coatings. It contains 68% active content. | |
| TOYNOL® S-183 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® S-183, in the form of a clear liquid, is a multi-branched alcohol modified surfactant. This product can be used in waterborne inks, water-based varnishes, adhesives, paper coatings, and textile coatings. It contains 78% active content. | |
| TOYNOL® S-184 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® S-184, in the form of a clear liquid, is a multi-branched alcohol modified surfactant. This product can be used in waterborne inks, water-based varnishes, adhesives, paper coatings, and textile coatings. It contains 80% active content. | |
| TOYNOL® S-195 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® S-195, in the form of a pale yellow liquid, is a modified acetylenic diol non-ionic surfactant. This product is a foam control wetting agent that can be used in waterborne composite additives, aqueous pressure-sensitive adhesives, waterborne adhe...展开 TOYNOL® S-195, in the form of a pale yellow liquid, is a modified acetylenic diol non-ionic surfactant. This product is a foam control wetting agent that can be used in waterborne composite additives, aqueous pressure-sensitive adhesives, waterborne adhesives, and aqueous finishing agents. It contains 30% active content. 收起 | |
| TOYNOL® SA | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® SA, in the form of a pale yellow liquid, is a modified acetylenic diol non-ionic surfactant. This product is a foam control wetting agent that can be used in waterborne composite additives, aqueous pressure-sensitive adhesives, waterborne adhesiv...展开 TOYNOL® SA, in the form of a pale yellow liquid, is a modified acetylenic diol non-ionic surfactant. This product is a foam control wetting agent that can be used in waterborne composite additives, aqueous pressure-sensitive adhesives, waterborne adhesives, and aqueous finishing agents. It contains 40% active content. 收起 | |
| TOYNOL® SIF-706 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® SIF-706, in the form of a colorless to pale yellow transparent liquid, is a wetting and leveling agent that can be used in paints, coatings, and inks. This product is a rheology modifier that can reduce the system's surface tension and strengthen...展开 TOYNOL® SIF-706, in the form of a colorless to pale yellow transparent liquid, is a wetting and leveling agent that can be used in paints, coatings, and inks. This product is a rheology modifier that can reduce the system's surface tension and strengthen the system of base leveling. It contains 12.5% active content. This product is particularly designed for solvent-based systems, and works acceptably in solvent-free and water-based systems. 收起 | |
| TOYNOL® SIF-720 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® SIF-720, in the form of a colorless to pale yellow transparent liquid, is a wetting and leveling agent that can be used in paints, coatings, and inks. This product is a rheology modifier that can reduce the system's surface tension and strengthen...展开 TOYNOL® SIF-720, in the form of a colorless to pale yellow transparent liquid, is a wetting and leveling agent that can be used in paints, coatings, and inks. This product is a rheology modifier that can reduce the system's surface tension and strengthen the system of base leveling. It contains 100% active content. This product is particularly designed for solvent-based systems, solvent-free systems, and water-based systems. 收起 | |
| TOYNOL® SIF-741 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® SIF-741, in the form of a colorless to pale yellow transparent liquid, is a wetting and leveling agent that can be used in paints, coatings, and inks. This product is a rheology modifier that can reduce the system's surface tension and strengthen...展开 TOYNOL® SIF-741, in the form of a colorless to pale yellow transparent liquid, is a wetting and leveling agent that can be used in paints, coatings, and inks. This product is a rheology modifier that can reduce the system's surface tension and strengthen the system of base leveling. It contains 50% active content. This product is particularly designed for solvent-based systems and water-based systems, and works acceptably in solvent-free systems. 收起 | |
| TOYNOL® Superwet-190 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® Superwet-190, in the form of a pale yellow liquid, is a modified acetylenic diol nonionic surfactant. This product can be used in waterborne inks, water-based coatings, and water-based adhesives. Its flash point starts above 110℃. | |
| TOYNOL® Superwet-320 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® Superwet-320, in the form of a pale yellow liquid, is a foam control wetting agent for waterborne systems. This product can be used in waterborne inks, coatings, adhesives, and paper coatings. It is VOC-free. | |
| TOYNOL® Superwet-320E | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® Superwet-320E, in the form of a pale yellow liquid, is a foam control wetting agent for waterborne systems. This product can be used in waterborne inks, coatings, adhesives, and paper coatings. It is VOC-free. | |
| TOYNOL® Superwet-340 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® Superwet-340, in the form of a pale yellow liquid, is a foam control wetting agent for waterborne systems. This product can be used in waterborne inks, coatings, adhesives, and paper coatings. It is VOC-free. | |
| TOYNOL® Superwet-360 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® Superwet-360, in the form of a pale yellow liquid, is a foam control wetting agent for waterborne systems. This product can be used in waterborne inks, coatings, adhesives, and paper coatings. It is VOC-free. | |
| TOYNOL® T-86 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® T-86, in the form of a pale yellow liquid, is an ethoxylated acetylenic diol-based non-ionic surfactant. This product is a fountain solution additive that can be used as a coating agent for polystyrene substrates. It is VOC free and contains 85%...展开 TOYNOL® T-86, in the form of a pale yellow liquid, is an ethoxylated acetylenic diol-based non-ionic surfactant. This product is a fountain solution additive that can be used as a coating agent for polystyrene substrates. It is VOC free and contains 85% active content. 收起 | |
| TOYNOL® T-86N | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® T-86N, in the form of a pale yellow liquid, is an ethoxylated acetylenic diol-based non-ionic surfactant. This product is a fountain solution additive that can be used as a coating agent for polystyrene substrates. It is VOC free and contains 80...展开 TOYNOL® T-86N, in the form of a pale yellow liquid, is an ethoxylated acetylenic diol-based non-ionic surfactant. This product is a fountain solution additive that can be used as a coating agent for polystyrene substrates. It is VOC free and contains 80% active content. 收起 | |
| TOYNOL® T-87 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® T-87, in the form of a pale yellow liquid, is an ethoxylated acetylenic diol-based non-ionic surfactant. This product is a fountain solution additive that can be used as a coating agent for polystyrene substrates. It is VOC free and contains 90%...展开 TOYNOL® T-87, in the form of a pale yellow liquid, is an ethoxylated acetylenic diol-based non-ionic surfactant. This product is a fountain solution additive that can be used as a coating agent for polystyrene substrates. It is VOC free and contains 90% active content. 收起 | |
| TOYNOL® T-95 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® T-95, in the form of a pale yellow liquid, is an ethoxylated acetylenic diol-based non-ionic surfactant. This product is a fountain solution additive that can be used as a coating agent for polystyrene substrates. It is VOC free and contains 100...展开 TOYNOL® T-95, in the form of a pale yellow liquid, is an ethoxylated acetylenic diol-based non-ionic surfactant. This product is a fountain solution additive that can be used as a coating agent for polystyrene substrates. It is VOC free and contains 100% active content. 收起 | |
| Cenomic™ 1 | Bühler AG | Cenomic™ 1 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler S...展开 Cenomic™ 1 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. 收起 |  |
| Cenomic™ 15 | Bühler AG | Cenomic™ 15 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler ...展开 Cenomic™ 15 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. 收起 |  |
| Cenomic™ 3 | Bühler AG | Cenomic™ 3 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler S...展开 Cenomic™ 3 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. 收起 |  |
| Cenomic™ 6 | Bühler AG | Cenomic™ 6 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler S...展开 Cenomic™ 6 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. 收起 |  |
| MacroMedia™ | Bühler AG | MacroMedia™的高性能泵和小体积研磨个体的组合是市场上独一无二的。由于在预研磨阶段有更好的工艺控制，原材料质量的波动得以平衡，并实现预研磨中间体产品的均匀性能。这款产品最优化了精细研磨的结果，并提高了最终产品的质量。同时，与其它预研磨解决方案相比，该系统由于有更好的材料回收率和优化的能量效率而降低了成本。 |  |
| MicroMedia™ L | Bühler AG | MicroMedia™ L is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMe...展开 MicroMedia™ L is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 |  |
| MicroMedia™ L-C | Bühler AG | MicroMedia™ L-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The Micro...展开 MicroMedia™ L-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 |  |
| MicroMedia™ P1-C | Bühler AG | MicroMedia™ P1-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The Micr...展开 MicroMedia™ P1-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 |  |
| MicroMedia™ P2-C | Bühler AG | MicroMedia™ P2-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The Micr...展开 MicroMedia™ P2-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 |  |
| MicroMedia™ X1 | Bühler AG | MicroMedia™ X1 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...展开 MicroMedia™ X1 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 |  |
| MicroMedia™ X2 | Bühler AG | MicroMedia™ X2 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...展开 MicroMedia™ X2 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 |  |
| MicroMedia™ X3 | Bühler AG | MicroMedia™ X3 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...展开 MicroMedia™ X3 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 |  |
| MicroMedia™ X4 | Bühler AG | MicroMedia™ X4 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...展开 MicroMedia™ X4 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 |  |
| Performix™ HSD-15 | Bühler AG | Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Availabl...展开 Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Available in the regions Latin America, Asia, Middle East and Africa 收起 |  |
| Performix™ HSD-20 | Bühler AG | Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Availabl...展开 Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Available in the regions Latin America, Asia, Middle East and Africa 收起 |  |
| Performix™ HSD-30 | Bühler AG | Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Availabl...展开 Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Available in the regions Latin America, Asia, Middle East and Africa 收起 |  |
| Performix™ HSD-40 | Bühler AG | Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Availabl...展开 Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Available in the regions Latin America, Asia, Middle East and Africa 收起 |  |
| PML 2 | Bühler AG | The PML 2 is the optimal solution for the development of innovative wet grinding processes. The core piece is a robust and powerful drive and control unit which can be combined with different process units tailored to specific applications. If for true gr...展开 The PML 2 is the optimal solution for the development of innovative wet grinding processes. The core piece is a robust and powerful drive and control unit which can be combined with different process units tailored to specific applications. If for true grinding applications, metal-free dispersion of electronic materials or nano applications – the PML 2 is the right solution. 收起 |  |
| PML easy | Bühler AG | PML easy is a universal bead mill platform for lab-scaled process development has a modular design and offers unmatched flexibility. Its core piece is a resistant and powerful drive which can be combined with two different process units tailored to specif...展开 PML easy is a universal bead mill platform for lab-scaled process development has a modular design and offers unmatched flexibility. Its core piece is a resistant and powerful drive which can be combined with two different process units tailored to specific applications. *Available in the regions Latin America, Asia, Middle East and Africa 收起 |  |
| Trias™ 300 | Bühler AG | Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international st...展开 Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international standards. The camberless VIVA™ roll technology guarantees even product quality independent of the roll pressure. 收起 |  |
| Trias™ 600 | Bühler AG | Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international st...展开 Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international standards. The camberless VIVA™ roll technology guarantees even product quality independent of the roll pressure. 收起 |  |
| Trias™ 800 | Bühler AG | Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international st...展开 Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international standards. The camberless VIVA™ roll technology guarantees even product quality independent of the roll pressure. 收起 |  |
| Trinomic™ 1300 | Bühler AG | Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative...展开 Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative paints, toners, coatings and lubricants, but also for materials for the cosmetics industries. The three-roll mill is designed for meeting high quality demands and at the same time enables convenient, easy operation and quick cleaning 收起 |  |
| Trinomic™ 600 | Bühler AG | Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative...展开 Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative paints, toners, coatings and lubricants, but also for materials for the cosmetics industries. The three-roll mill is designed for meeting high quality demands and at the same time enables convenient, easy operation and quick cleaning 收起 |  |
