CAB-151-0.7 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in p...展开 CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
CAB-381-0.1 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in ...展开 CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
CAB-381-0.5 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...展开 CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
CAB-381-2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing ...展开 CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
CAB-381-20 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in pr...展开 CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
CAB-551-0.01 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printi...展开 CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
CAB-551-0.2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...展开 CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
Diethylene Glycol Ethyl Ether Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Diethylene Glycol Ethyl Ether Acetate appears as a colorless and transparent liquid. It can be used as a coalescing aid for emulsion paints. It is also ideal for use to slow drying in nitrocellulose lacquers, natural paints, or spray paint. | |
Dipropylene Glycol Monomethyl Ether | Jiangsu Ruijia Chemistry Co.,Ltd. | Dipropylene Glycol Monomethyl Ether is a colorless and transparent liquid. It can be used as a solvent in water-based paints and screen-printing inks. It can also be used as the coupling agent (often mix) of dilute aqueous coatings. | |
Ethylene Glycol Ethyl Ether Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Ethylene Glycol Ethyl Ether Acetate is a colorless and transparent liquid. It can be used as a solvent in protective coatings and inks, as well as a solvent for painting metal and furniture. | |
Ethylene Glycol Monobutyl Ether | Jiangsu Ruijia Chemistry Co.,Ltd. | Ethylene Glycol Monobutyl Ether is a colorless and transparent liquid. It can be used as a solvent in paint and as a solvent in enamel paint remover. | |
Ethylene Glycol Monobutyl Ether Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Ethylene Glycol Monobutyl Ether Acetate is a colorless and transparent liquid. It can be used as a coalescing aid in emulsion paints. It can also be used in emulsion coatings. | |
Ethylene Glycol Monoethyl Ether | Jiangsu Ruijia Chemistry Co.,Ltd. | Ethylene Glycol Monoethyl Ether is a colorless and transparent liquid. It can be used as a solvent in paints and printing inks. It is also used in the preparation of paint thinner and as a raw material for paint. | |
ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
Isobutyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Isobutyl Acetate is a clear liquid without precipitates. It can be used in coatings and as a solvent in polymer paints, adhesives, and isocyanate lacquers. | |
Isooctyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Isooctyl Acetate is a clear liquid with a pleasant, fruity fragrance. It is used to promote flow and retard blushing in formulations such as lacquers, lacquers emulsions in screen inks, parking enamels and air-dry enamels. | |
Isopropyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Isopropyl Acetate is a colorless liquid with a strong, fruity odor. This product is a fast-evaporating solvent. It is used in gravure printing inks for plastic films such as bread wrap. The rest finds many uses in coatings and adhesives. | |
LIOCRYL AM 432 | Synthopol Chemie Germany | LIOCRYL AM 432 is an aqueous, solvent- and plasticizer-free pure acrylic emulsion with a fine particle size. It is particularly suitable for the formulation of primer coats with good wet adhesion. It is a pure acrylic emulsion for use in pigmented matte a...展开 LIOCRYL AM 432 is an aqueous, solvent- and plasticizer-free pure acrylic emulsion with a fine particle size. It is particularly suitable for the formulation of primer coats with good wet adhesion. It is a pure acrylic emulsion for use in pigmented matte and silk interior and exterior paints. The binder may be used as an adherend surface for substrates which are difficult to wet (terrazzo tiles), by itself or mixed with cement. It is alkali-stable and displays increased water stability and very good wet adhesion. It possesses shear stability and good stamp adhesion. Completely consolidated films of the binder display good tensile strength and elasticity. 收起 | |
LIOCRYL AM 483 | Synthopol Chemie Germany | LIOCRYL AM 483 is an aqueous pure acrylic emulsion that is solvent and plasticizer free. It is a melamine oder polyisocyanate crosslinkable pure acrylic emulsion, neutralized with DMEA. The emulsion is preserved for storage and contains no formaldehyde or...展开 LIOCRYL AM 483 is an aqueous pure acrylic emulsion that is solvent and plasticizer free. It is a melamine oder polyisocyanate crosslinkable pure acrylic emulsion, neutralized with DMEA. The emulsion is preserved for storage and contains no formaldehyde or formaldehyde-releasing products. 收起 | |
LIOCRYL AM 900 | Synthopol Chemie Germany | LIOCRYL AM 900 is an aqueous modified pure acrylic emulsion. It is particularly suitable for formulations for clear coats, varnishes and glossy paints for indoors and outdoors. It is miscible in all proportions with suitable polyurethane dispersions. Afte...展开 LIOCRYL AM 900 is an aqueous modified pure acrylic emulsion. It is particularly suitable for formulations for clear coats, varnishes and glossy paints for indoors and outdoors. It is miscible in all proportions with suitable polyurethane dispersions. After drying, the film has a good hardness and blocking resistance despite the low MFFT. It has an extremely high light and water resistance as well as adhesion even when exposed to large amounts of water on substrates such as glass, metal, and wood. 收起 | |
LIOCRYL AM 903 | Synthopol Chemie Germany | LIOCRYL AM 903 is an aqueous modified pure acrylic emulsion. It is particularly suitable for formulations for clear coats, varnishes and glossy paints for indoors and outdoors. It is miscible in all proportions with suitable polyurethane dispersions. The ...展开 LIOCRYL AM 903 is an aqueous modified pure acrylic emulsion. It is particularly suitable for formulations for clear coats, varnishes and glossy paints for indoors and outdoors. It is miscible in all proportions with suitable polyurethane dispersions. The emulsion is preserved for storage and contains no formaldehyde or formaldehyde-releasing products. LIOCRYL AM 903 contains no alkyl phenol ethoxylates (APEO's). 收起 | |
LIOCRYL AM 907 | Synthopol Chemie Germany | LIOCRYL AM 907 is an aqueous, self-crosslinking pure acrylic emulsion. It has a fine particle size and is solvent- and plasticizer-free. This pure acrylic emulsion is recommended for use in solvent-free interior and exterior coatings. The product is disti...展开 LIOCRYL AM 907 is an aqueous, self-crosslinking pure acrylic emulsion. It has a fine particle size and is solvent- and plasticizer-free. This pure acrylic emulsion is recommended for use in solvent-free interior and exterior coatings. The product is distinguished by good blocking resistance, good flow and high gloss, and good yellowing resistance. Films of the emulsion are clear, tough and resilient, light resistant, and display good resistance to water, ethanol, and alkali. 收起 | |
LIOCRYL AM 912 | Synthopol Chemie Germany | LIOCRYL AM 912 is an aqueous pure acrylic emulsion that is solvent- and plasticizer-free. It is a general-purpose emulsion for the manufacture of matte to silk-finish emulsion paints and wood varnishes for interior and exterior coatings. It is distinguish...展开 LIOCRYL AM 912 is an aqueous pure acrylic emulsion that is solvent- and plasticizer-free. It is a general-purpose emulsion for the manufacture of matte to silk-finish emulsion paints and wood varnishes for interior and exterior coatings. It is distinguished by excellent adhesion to old alkyd resin coats exposed to moisture. The glossy paints are characterized by good stability, levelling, resistance to light and blocking resistance. 收起 | |
LIOCRYL AM 914 | Synthopol Chemie Germany | LIOCRYL AM 914 is an aqueous pure acrylic emulsion that is solvent- and plasticizer-free. It is a very hard pure acrylic emulsion that when blended with Liocryl AM 913 can be used to achieve any hardness, sandability, stackability, and blocking resistance...展开 LIOCRYL AM 914 is an aqueous pure acrylic emulsion that is solvent- and plasticizer-free. It is a very hard pure acrylic emulsion that when blended with Liocryl AM 913 can be used to achieve any hardness, sandability, stackability, and blocking resistance. The emulsion is preserved for storage and contains no formaldehyde or formaldehyde-releasing products. 收起 | |
LIOCRYL AM 916 | Synthopol Chemie Germany | LIOCRYL AM 916 is an aqueous pure acrylic dispersion that is solvent- and plasticizer-free. It is recommended for sanding sealers in wood coating systems. It is advisable to add 8% butyl glycol for complete film formation at room temperature. The emulsion...展开 LIOCRYL AM 916 is an aqueous pure acrylic dispersion that is solvent- and plasticizer-free. It is recommended for sanding sealers in wood coating systems. It is advisable to add 8% butyl glycol for complete film formation at room temperature. The emulsion is preserved for storage and contains no formaldehyde or formaldehyde-releasing products. 收起 | |
LIOCRYL AM 920 | Synthopol Chemie Germany | LIOCRYL AM 920 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups and fine particle size. It is solvent- and plasticizer-free. The emulsion is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood paints...展开 LIOCRYL AM 920 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups and fine particle size. It is solvent- and plasticizer-free. The emulsion is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood paints and furniture varnishes. For the purpose of 2 C paints Liocryl AM 920 can be combined with Liopur polyurethane dispersions. The emulsion can be used wherever high chemical resistance, plasticiser resistance and non-yellowing properties are required. 收起 | |
LIOCRYL AM 921 | Synthopol Chemie Germany | LIOCRYL AM 921 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups and fine particle size. It is solvent- and plasticizer-free. Liocryl AM 921 is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood and ...展开 LIOCRYL AM 921 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups and fine particle size. It is solvent- and plasticizer-free. Liocryl AM 921 is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood and furniture varnishes. Coatings based on Liocryl AM 921 show good grain enhancement on wood. Liocryl AM 921 is an APEO free version of Liocryl AM 920. 收起 | |
LIOCRYL AM 923 | Synthopol Chemie Germany | LIOCRYL AM 923 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups and fine particle size. It is solvent- and plasticizer-free. This emulsion is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood and f...展开 LIOCRYL AM 923 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups and fine particle size. It is solvent- and plasticizer-free. This emulsion is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood and furniture varnishes. For this purpose it can be combined with Liopur polyurethane dispersions. The emulsion can be used wherever high chemical resistance and yellowing resistance are required. As a result of the fine particle size, excellent transparency in the wet film is obtained together with very good grain enhancement. 收起 | |
LIOCRYL AM 951 | Synthopol Chemie Germany | LIOCRYL AM 951 is an aqueous, self-crosslinking acrylic emulsion with a fine particle size. It is solvent- and plasticizer-free. This acrylic emulsion is suitable for use in solvent-free or low-solvent coatings. It is distinguished by high blocking resist...展开 LIOCRYL AM 951 is an aqueous, self-crosslinking acrylic emulsion with a fine particle size. It is solvent- and plasticizer-free. This acrylic emulsion is suitable for use in solvent-free or low-solvent coatings. It is distinguished by high blocking resistance and good stability characteristics. 收起 | |
LIOCRYL AM 955 | Synthopol Chemie Germany | LIOCRYL AM 955 is an aqueous, self-crosslinking pure acrylic emulsion. It is suitable for quick-drying wood coatings for industrial processing affording early stackability. The blocking resistance in accordance with a variety of evaluation methods is very...展开 LIOCRYL AM 955 is an aqueous, self-crosslinking pure acrylic emulsion. It is suitable for quick-drying wood coatings for industrial processing affording early stackability. The blocking resistance in accordance with a variety of evaluation methods is very good. The emulsion is preserved for storage. It contains no solvents or plasticisers and no formaldehyde or formaldehyde-releasing products. The emulsion contains no alkyl phenol ethoxylates (APEO’s). 收起 | |
LIOCRYL AM 982 | Synthopol Chemie Germany | LIOCRYL AM 982 is an aqueous pure acrylic emulsion. This dispersion is especially recommended for formulating paints for plastics components such as hi-fi cabinets. It offers excellent chemical resistance. The emulsion is preserved for storage, and it con...展开 LIOCRYL AM 982 is an aqueous pure acrylic emulsion. This dispersion is especially recommended for formulating paints for plastics components such as hi-fi cabinets. It offers excellent chemical resistance. The emulsion is preserved for storage, and it contains no plasticisers and no formaldehyde or formaldehyde-releasing products. 收起 | |
LIOCRYL AS 320 N | Synthopol Chemie Germany | LIOCRYL AS 320 N is an aqueous styrene acrylic emulsion. It is solvent- and plasticizer-free. The emulsion is particularly suitable for production of matt to glossy paints for indoor and outdoor use and for formulations for tile adhesives. The film dries ...展开 LIOCRYL AS 320 N is an aqueous styrene acrylic emulsion. It is solvent- and plasticizer-free. The emulsion is particularly suitable for production of matt to glossy paints for indoor and outdoor use and for formulations for tile adhesives. The film dries above the film formation temperature to give a clear coating, shows little tendency to swell in water and a high saponification resistance. Because of these properties Liocryl AS 320 is expecially suitable for the production of outdoor paints and plastics-bound plasters as well as for impregnating and priming brickwork and sanding plasters. 收起 | |
LIOCRYL AS 603 | Synthopol Chemie Germany | LIOCRYL AS 603 is an aqueous styrene acrylic emulsion. It is suitable for anti-corrosive primers with good adhesion to metal and for glossy top coats. Combined with Synthalat W 30, very good hybrid paints can be made, with good salt spray resistance and h...展开 LIOCRYL AS 603 is an aqueous styrene acrylic emulsion. It is suitable for anti-corrosive primers with good adhesion to metal and for glossy top coats. Combined with Synthalat W 30, very good hybrid paints can be made, with good salt spray resistance and high gloss. The emulsion is preserved for storage. It contains no formaldehyde or formaldehyde-releasing products. 收起 | |
LIOCRYL AS 610 | Synthopol Chemie Germany | LIOCRYL AS 610 is an aqueous styrene acrylic emulsion. It is suitable for wood and parquet floor varnishes, particularly in combination with PU dispersions such as LIOPUR 92-091. The emulsion requires solvents for film formation, e.g. 5-6% butylglycol. Co...展开 LIOCRYL AS 610 is an aqueous styrene acrylic emulsion. It is suitable for wood and parquet floor varnishes, particularly in combination with PU dispersions such as LIOPUR 92-091. The emulsion requires solvents for film formation, e.g. 5-6% butylglycol. Combined with PU dispersion LIOPUR 92-091, varnishes can be formulated that meet the requirements for receiving the “blue angel” mark denoting environmentally safe products. The films of AS 610 are clear, hard and have good water resistance, and the necessary abrasion values for parquet floor varnishes (Taber abraser). 收起 | |
LIOCRYL AS 615 | Synthopol Chemie Germany | LIOCRYL AS 615 is an aqueous styrene acrylic emulsion. It is suitable for use in primers and top coats for metal and other substrates. The emulsion contains no alkylphenol ethoxylates (APEO’s), it is solvent- and plasticizer-free. This product is preserve...展开 LIOCRYL AS 615 is an aqueous styrene acrylic emulsion. It is suitable for use in primers and top coats for metal and other substrates. The emulsion contains no alkylphenol ethoxylates (APEO’s), it is solvent- and plasticizer-free. This product is preserved for storage, and contains no formaldehyde or formaldehyde-releasing products. 收起 | |
LIOCRYL AS 640 | Synthopol Chemie Germany | LIOCRYL AS 640 is an aqueous hydroxy functional acrylic emulsion that is solvent- and plasticizer-free. It is suitable for the formulation of fast drying aqueous 2-pack top coats with high gloss und good chemical resistance. The emulsion requires the addi...展开 LIOCRYL AS 640 is an aqueous hydroxy functional acrylic emulsion that is solvent- and plasticizer-free. It is suitable for the formulation of fast drying aqueous 2-pack top coats with high gloss und good chemical resistance. The emulsion requires the addition of coalescents for proper film formation The emulsion film can have a slightly structured surface. This phenomenon does not however appear in formulated coatings, therefore the properties of the coatings (such as gloss or transparency) are not adversely affected. 收起 | |
LIOCRYL AS 680 | Synthopol Chemie Germany | LIOCRYL AS 680 is an aqueous self-crosslinking styrene acrylic emulsion. Blended with special Liopur-PU-dispersions, Liocryl AS 680 is particularly suitable for the formulation of 1C coatings with good abrasion resistance and high hardness. Coatings based...展开 LIOCRYL AS 680 is an aqueous self-crosslinking styrene acrylic emulsion. Blended with special Liopur-PU-dispersions, Liocryl AS 680 is particularly suitable for the formulation of 1C coatings with good abrasion resistance and high hardness. Coatings based on these combinations are distinguished by good chemical resistance against ethanol and plasticiser. Used as a sole binder, Liocryl AS 680 has good adhesion properties on plastics such as polystyrene. The resistance against ethanol and petrol is good. 收起 | |
Liocryl XAM 2827 | Synthopol Chemie Germany | Liocryl XAM 2827 is a self-crosslinking pure acrylic emulsion with a high crosslinking degree. It is particularly suitable for the formulation of 1C wood coatings especially in combination with appropriate Liopur polyurethane dispersions. The emulsion is ...展开 Liocryl XAM 2827 is a self-crosslinking pure acrylic emulsion with a high crosslinking degree. It is particularly suitable for the formulation of 1C wood coatings especially in combination with appropriate Liopur polyurethane dispersions. The emulsion is preserved for storage. It contains no solvents or plasticisers and no formaldehyde or formaldehyde-releasing products. The emulsion contains no alkyl phenol ethoxylates (APEO’s). 收起 | |
Liocryl XAM 5134 | Synthopol Chemie Germany | Liocryl XAM 5134 is an aqueous, self-crosslinking pure acrylic emulsion for 1-pack parquet and furniture varnishes. It is free of solvents, plasticisers, formaldehyde and APEOs and stands out with good chemical resistance. | |
Liocryl XAM 6979 | Synthopol Chemie Germany | Liocryl XAM 6979 is an aqueous, self-crosslinking pure acrylic emulsion. Films of Liocryl XAM 6979 are distinguished by particularly good blocking resistance and, excellent elasticity. Due to its low particle size the emulsion has a good In-can and wet f...展开 Liocryl XAM 6979 is an aqueous, self-crosslinking pure acrylic emulsion. Films of Liocryl XAM 6979 are distinguished by particularly good blocking resistance and, excellent elasticity. Due to its low particle size the emulsion has a good In-can and wet film clarity. 收起 | |
LIOPTAL 541 | Synthopol Chemie Germany | LIOPTAL 541 is a short-oil alkyd resin modified with phenol resin. Because of its composition, Lioptal 541 is a special-purpose binder for air- and stove-drying primers with very short drying times and excellent overspray tolerance. Through combination wi...展开 LIOPTAL 541 is a short-oil alkyd resin modified with phenol resin. Because of its composition, Lioptal 541 is a special-purpose binder for air- and stove-drying primers with very short drying times and excellent overspray tolerance. Through combination with other short-oil or medium-oil drying alkyd resin, epoxy esters and urea or melamine resins a wide range of possibilities are obtained not only in the primer sector but also for fast-drying industrial coatings. 收起 | |
LIOPTAL 836 | Synthopol Chemie Germany | LIOPTAL 836 is a short-oil drying alkyd resin. It is suitable for use in air-drying primers, as well as single and top coats. It has good dipping bath stability. The low oil content of Lioptal 836 yields very quick-drying glossy top coats. With forced dry...展开 LIOPTAL 836 is a short-oil drying alkyd resin. It is suitable for use in air-drying primers, as well as single and top coats. It has good dipping bath stability. The low oil content of Lioptal 836 yields very quick-drying glossy top coats. With forced drying, e.g. 30 min / 80°C, very hard films are obt ained within a short period of time. Dipping coatings based on Lioptal 836 have excellent tank stability. The possibility of combining with clorinated vinyl polymers (e.g. Laroflax) is also worth mentioning. 收起 | |
LIOPTAL A 424 | Synthopol Chemie Germany | LIOPTAL A 424 is a heat-reactive acrylic resin that is cross-linkable with melamine resins. It is suitable for use in combination with melamine resin for stoving finishes with high reactivity, stoving temperatures starting at 100°C. | |
LIOPTAL A 453 60% | Synthopol Chemie Germany | LIOPTAL A 453 is a heat-reactive acrylic resin that is crosslinkable with melamine resins. It is suitable for use in combination with melamine resin for stoving finishes with excellent weathering and colour stability. This product can be used in stoving c...展开 LIOPTAL A 453 is a heat-reactive acrylic resin that is crosslinkable with melamine resins. It is suitable for use in combination with melamine resin for stoving finishes with excellent weathering and colour stability. This product can be used in stoving conditions 130°C and higher. 收起 | |
LIOPTAL A 453 65% | Synthopol Chemie Germany | LIOPTAL A 453 is a heat-reactive acrylic resin that is crosslinkable with melamine resins. It is suitable for use in combination with melamine resin for stoving finishes with excellent weathering and colour stability. Stoving conditions for this product a...展开 LIOPTAL A 453 is a heat-reactive acrylic resin that is crosslinkable with melamine resins. It is suitable for use in combination with melamine resin for stoving finishes with excellent weathering and colour stability. Stoving conditions for this product are 130°C and higher. 收起 | |
LIOPTAL A 470 | Synthopol Chemie Germany | LIOPTAL A 470 is an acrylic resin that is crosslinkable with melamine resins. It is recommended for stove-drying top coats in combination with melamine resins. | |
LIOPTAL A 471 | Synthopol Chemie Germany | LIOPTAL A 471 is a heat-reactive high-solids acrylic resin that is curable with amino resins or blocked polyisocyanates. It can be combined with blocked polyisocyanates or melamine resins, stoved finishes with high flexibility, colour stability and weathe...展开 LIOPTAL A 471 is a heat-reactive high-solids acrylic resin that is curable with amino resins or blocked polyisocyanates. It can be combined with blocked polyisocyanates or melamine resins, stoved finishes with high flexibility, colour stability and weathering resistance. It is suitable for stoving conditions above 130°C. This product is esed for metal substrates as a base coat and topcoat for high solid automotive and industrial coatings. 收起 | |
LIOPTAL B 49 | Synthopol Chemie Germany | LIOPTAL B 49 is a fast-drying medium-oil alkyd resin. It can be used in machine and automotive coatings, radiator paints, industrial coatings and primers, effect coatings, and with melamine resins for 80°C. | |
LIOPTAL ES 43 | Synthopol Chemie Germany | LIOPTAL ES 43 is a short-oil alkyd resin supplied as 70% in butyl acetate. It can be used in combination with nitrocellulose for wood and metal finishes with rapid solvent evaporation and good resistance to water and alcohol. This product can also be used...展开 LIOPTAL ES 43 is a short-oil alkyd resin supplied as 70% in butyl acetate. It can be used in combination with nitrocellulose for wood and metal finishes with rapid solvent evaporation and good resistance to water and alcohol. This product can also be used in combination with unplasticized urea or melamine resins for stove-drying industrial coatings; 1- and 2-component AC coatings; as the hydroxyl component in PUR coatings. 收起 | |
LIOPTAL TH 406 | Synthopol Chemie Germany | LIOPTAL TH 406 is a short-oil alkyd resin modified with phenol resin. It is suitable for use in fast-drying anti-corrosive primers and synthetic resin-based paints, shop primers, knife fillers, and stove-drying industrial primers and topcoats. | |
LIOPUR 2004-140 | Synthopol Chemie Germany | LIOPUR 2004-140 is a solvent free, aqueous, aliphatic polyurethane dispersion based on a special polyester. Films of the dispersion are transparent and tack-free, with sufficient hardness, high flexibility and elasticity. Due to its low minimum film formi...展开 LIOPUR 2004-140 is a solvent free, aqueous, aliphatic polyurethane dispersion based on a special polyester. Films of the dispersion are transparent and tack-free, with sufficient hardness, high flexibility and elasticity. Due to its low minimum film forming temperature, LIOPUR2004-140 does not need any coalescence agent for filmforming at room temperature. Therefore it can be combined with acrylic emulsions with high Tg like LIOCRYL AS 680 and AS 615. 收起 | |
LIOPUR 2004-422 | Synthopol Chemie Germany | LIOPUR 2004-422 is an aqueous, self-crosslinking aromatic urethane acrylic emulsion. Films of the dispersion are transparent and tack-free, with high hardness, flexibility and elasticity. Films based on LIOPUR 2004-422 display very good water resistance a...展开 LIOPUR 2004-422 is an aqueous, self-crosslinking aromatic urethane acrylic emulsion. Films of the dispersion are transparent and tack-free, with high hardness, flexibility and elasticity. Films based on LIOPUR 2004-422 display very good water resistance and good resistance to ethanol. LIOPUR 2004-422 is recommended for waterbased 1C-wood lacquers with high hardness, good taber abraison and very good chemical resistance. 收起 | |
LIOPUR 2005-380 | Synthopol Chemie Germany | LIOPUR 2005-380 is a surfactant-free aqueous aliphatic polyurethane dispersion. Coatings based on LIOPUR 2005-380 form tack-free, transparent films with very good surface hardness and scratch resistance after air drying. LIOPUR 2005-380 is suitable for 1C...展开 LIOPUR 2005-380 is a surfactant-free aqueous aliphatic polyurethane dispersion. Coatings based on LIOPUR 2005-380 form tack-free, transparent films with very good surface hardness and scratch resistance after air drying. LIOPUR 2005-380 is suitable for 1C wood lacquers which early sanding properties and good grain enhencement on pale wood, especially oak. Lacquers based on LIOPUR 2005-380 also exhibit a good recoatibility. 收起 | |
LIOPUR PFL 1130 | Synthopol Chemie Germany | LIOPUR PFL 1130 is an emulsifier-free, oil-modified aliphatic polyurethane dispersion. After air-drying, film coatings based on LIOPUR PFL 1130/30% form transparent films which are tack-free and exhibit very good surface hardness and scratch resistance. L...展开 LIOPUR PFL 1130 is an emulsifier-free, oil-modified aliphatic polyurethane dispersion. After air-drying, film coatings based on LIOPUR PFL 1130/30% form transparent films which are tack-free and exhibit very good surface hardness and scratch resistance. LIOPUR PFL 1130/30% is suitable for the formulation of 1-pack wood paints which are sandable after one to two hours. LIOPUR PFL 1130/30% as sole binder and in combination with acrylate dispersions possess excellent chemical resistance and good abrasion resistance. 收起 | |
LIOPUR PFL 1154 | Synthopol Chemie Germany | LIOPUR PFL 1154 is an aqueous, aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. After air-drying, film coatings based on LIOPUR PFL 1154 transparent films which are tack-free and exhibit good surface hardness. LIOPUR PFL 1...展开 LIOPUR PFL 1154 is an aqueous, aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. After air-drying, film coatings based on LIOPUR PFL 1154 transparent films which are tack-free and exhibit good surface hardness. LIOPUR PFL 1154 needs a small amount of appr 2-3 % butylglycol for film formation. Films based on LIOPUR PFL 1154 are distinguished by high toughness and resilience and tear strength. Owing to its very high abrasion resistance and its excellent chemical resistance, LIOPUR PFL 1154 can be used in combination with water-emulsifiable polyisocyanates for airdrying, aqueous, 2-pack parquet floor varnishes. Compared with other 2-pack dispersions, LIOPUR PFL 1154 is distinguished by good grain enhancement of the wood for water-thinnable formulations. 收起 | |
LIOPUR PFL 1263 | Synthopol Chemie Germany | LIOPUR PFL 1263 is an emulsifier-free, aqueous, aliphatic polyurethane dispersion based on polyester. Films of the dispersion are transparent and slightly tacky with excellent flexibility and elasticity. Coatings based on LiopurPFL 1263 have the following...展开 LIOPUR PFL 1263 is an emulsifier-free, aqueous, aliphatic polyurethane dispersion based on polyester. Films of the dispersion are transparent and slightly tacky with excellent flexibility and elasticity. Coatings based on LiopurPFL 1263 have the following Zwick material testing characteristics after 4 days drying at room temperature (initial force 1 N, testing speed 100 mm/min): Tear strength approximately 1 N/mm^2, and elongation at break approximately 700%. 收起 | |
LIOPUR PFL 1284 | Synthopol Chemie Germany | LIOPUR PFL 1284 is an aqueous solvent-free aliphatic polyurethane dispersion based on a special polyester combination. Coatings based on Liopur PFL 1284 form tack-free, transparent films with very good surface hardness after air drying, high flexibility a...展开 LIOPUR PFL 1284 is an aqueous solvent-free aliphatic polyurethane dispersion based on a special polyester combination. Coatings based on Liopur PFL 1284 form tack-free, transparent films with very good surface hardness after air drying, high flexibility and elasticity. These coatings exhibit a very good water resistance and good ethanol resistance. 收起 | |
LIOPUR PFL 1908 | Synthopol Chemie Germany | LIOPUR PFL 1908 is an aqueous, solvent-free, aliphatic polyurethane dispersion based on a polycarbonate. After air-drying, film coatings based on LIOPUR PFL1908 and more than 15 % butylglycole form transparent films which are tack-free and display good su...展开 LIOPUR PFL 1908 is an aqueous, solvent-free, aliphatic polyurethane dispersion based on a polycarbonate. After air-drying, film coatings based on LIOPUR PFL1908 and more than 15 % butylglycole form transparent films which are tack-free and display good surface resistance, high flexibility and elasticity. This product shows a good wet and dry appearance on wood. 收起 | |
LIOPUR PFL 1964 | Synthopol Chemie Germany | LIOPUR PFL 1964 is an aqueous, aliphatic polyurethane dispersion based on a polycarbonate. After air-drying, film coatings based on Liopur PFL 1964 form soft and elastics films. Liopur PFL 1964 is suitable as a sole binder and in combination with elastic ...展开 LIOPUR PFL 1964 is an aqueous, aliphatic polyurethane dispersion based on a polycarbonate. After air-drying, film coatings based on Liopur PFL 1964 form soft and elastics films. Liopur PFL 1964 is suitable as a sole binder and in combination with elastic hydroxy-polyesters or polyurethane dispersions as 2-pack system for soft-feeling and decor paints. As combination partner the polyurethane dispersion Liopur PFL 1953 based on a polyester is recommended in order to find the right balance between price and performance. 收起 | |
LIOPUR PFL 2146 | Synthopol Chemie Germany | LIOPUR PFL 2146 is an aqueous aliphatic polyurethane dispersion based on an oleochemical polyester. It does not need any cosolvents for film formation. Coatings based on LIOPUR 2146 form tack-free, transparent films with medium surface hardness after air ...展开 LIOPUR PFL 2146 is an aqueous aliphatic polyurethane dispersion based on an oleochemical polyester. It does not need any cosolvents for film formation. Coatings based on LIOPUR 2146 form tack-free, transparent films with medium surface hardness after air drying with good flexibility and elasticity. 收起 | |
LIOPUR PFL 2315 | Synthopol Chemie Germany | LIOPUR PFL 2315 is an aqueous, aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. It is solvent- and TEA-free. After air-drying, film coatings based on LIOPUR PFL 2315 form transparent films which are tack-free and exhibit g...展开 LIOPUR PFL 2315 is an aqueous, aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. It is solvent- and TEA-free. After air-drying, film coatings based on LIOPUR PFL 2315 form transparent films which are tack-free and exhibit good surface hardness. Films based on LIOPUR PFL 2315 are distinguished by high toughness and resilience and tear strength. Owing to its very high abrasion resistance and its excellent chemical resistance, LIOPUR PFL 2315 can be used in combination with water-emulsifiable polyisocyanates for air drying, aqueous, 2-pack parquet floor varnishes. Compared with other 2-pack dispersions, LIOPUR PFL 2315 is distinguished by good grain enhancement of the wood for water-thinnable formulations. 收起 | |
LIOPUR PFL 2323 | Synthopol Chemie Germany | LIOPUR PFL 2323 is an aqueous, solvent-free aliphatic polyurethane dispersion based on a special castor oil modified polyester combination. The polymer contains approximately 30% based on renewable raw materials. LIOPUR PFL2323 needs an amount of appr 4 %...展开 LIOPUR PFL 2323 is an aqueous, solvent-free aliphatic polyurethane dispersion based on a special castor oil modified polyester combination. The polymer contains approximately 30% based on renewable raw materials. LIOPUR PFL2323 needs an amount of appr 4 % butylglycol for film formation. Coatings based on LIOPUR PFL2323 form tack-free, transparent films with good surface hardness after air drying. These coatings exhibit a very good water resistance and for polyurethane dispersions excellent ethanol resistance. 收起 | |
LIOPUR PFL 2366 | Synthopol Chemie Germany | LIOPUR PFL 2366 is an aqueous, aliphatic modified polyurethane dispersion based on a polyester. It is free of solvents, TEA, and surfactants. After air-drying, film coatings based on LIOPUR PFL 2366 and 5 % butylglycole form transparent films which are ta...展开 LIOPUR PFL 2366 is an aqueous, aliphatic modified polyurethane dispersion based on a polyester. It is free of solvents, TEA, and surfactants. After air-drying, film coatings based on LIOPUR PFL 2366 and 5 % butylglycole form transparent films which are tack-free and display good surface resistance of appr. 120 sec Pendulum hardness after König (90 μm wet film after 24 h drying at room temperature). LIOPUR PFL 2366 is suitable as a sole binder in the formulation of solventpoor air-drying 1-pack parquet flooring and furniture varnishes owing to sufficient chemical resistance 收起 | |
LIOPUR PFL 2392 | Synthopol Chemie Germany | LIOPUR PFL 2392 is an aqueous, aliphatic modified polyurethane dispersion based on a polyester. It is free of solvents, TEA, and surfactants. It exhibits good flexibility and elasticity. LIOPUR PFL 2392 is designed for waterbased 1C basecoats with good hu...展开 LIOPUR PFL 2392 is an aqueous, aliphatic modified polyurethane dispersion based on a polyester. It is free of solvents, TEA, and surfactants. It exhibits good flexibility and elasticity. LIOPUR PFL 2392 is designed for waterbased 1C basecoats with good humidity resistance and good adhesion to different plastics due to the hydrophobic polymer character and its good intercoat adhesion to conventional 2C topcoats. 收起 | |
LIOPUR PFL 2634 | Synthopol Chemie Germany | LIOPUR PFL 2634 is an aliphatic hydroxyl group containing polyurethane dispersion, stabilized with DMEA. Coatings based on LIOPUR PFL 2634 form tack-free, transparent films. It is suitable for 2C glass and plastic lacquers in combination with typical hard...展开 LIOPUR PFL 2634 is an aliphatic hydroxyl group containing polyurethane dispersion, stabilized with DMEA. Coatings based on LIOPUR PFL 2634 form tack-free, transparent films. It is suitable for 2C glass and plastic lacquers in combination with typical hardeners like water dilutable polyisocyanates. Films of these two-component coatings exhibit very high pendulum hardness and excellent light resistance. This product is also suitable for one component stoving enamels in combination with suitable water-dilutable crosslinkers like melamine resins or blocked polyisocyanates. 收起 | |
LIOPUR PFL 2900 | Synthopol Chemie Germany | LIOPUR PFL 2900 is an aqueous aliphatic polyurethane dispersion based on a polyester from renewable raw materials. Coatings based on LIOPUR PFL 2900 need cosolvents in order to form tack-free, transparent films with very good surface hardness and scratch ...展开 LIOPUR PFL 2900 is an aqueous aliphatic polyurethane dispersion based on a polyester from renewable raw materials. Coatings based on LIOPUR PFL 2900 need cosolvents in order to form tack-free, transparent films with very good surface hardness and scratch resistance after air drying. It is suitable for 1C solventpoor wood and parquet lacquers which early sanding properties and good grain enhencement on pale wood, especially oak. Owing to its oily nature, paints can be made with LIOPUR PFL 2900 which have better high-build characteristics than conventional dispersions. 收起 | |
LIOPUR PFL 2966 | Synthopol Chemie Germany | LIOPUR PFL 2966 is an aqueous, aliphatic polyurethane dispersion based on a polyester. It is amine- and ammonia free. This product is suitable as a sole binder and in combination with other elastic polyurethane dispersions as 2-pack system for plastic coa...展开 LIOPUR PFL 2966 is an aqueous, aliphatic polyurethane dispersion based on a polyester. It is amine- and ammonia free. This product is suitable as a sole binder and in combination with other elastic polyurethane dispersions as 2-pack system for plastic coatings with excellent haptic, crockmeter-resistance and resistance to hydrolysis. LIOPUR PFL 1964 based on polycarbonate is recommended as combination partner to improve resistance to hydrolysis. 收起 | |
LIOPUR PFL 3046 | Synthopol Chemie Germany | LIOPUR PFL 3046 is an aqueous aliphatic polyurethane dispersion based on an oleochemical polyester. It is surfactant- and TEA-free. This product does not need any amount of cosolvents for film formation. Coatings based on LIOPUR PFL 3046 form tack-free, t...展开 LIOPUR PFL 3046 is an aqueous aliphatic polyurethane dispersion based on an oleochemical polyester. It is surfactant- and TEA-free. This product does not need any amount of cosolvents for film formation. Coatings based on LIOPUR PFL 3046 form tack-free, transparent films with medium surface hardness after air drying with good flexibility and elasticity. LIOPUR PFL 3046 exhibits very good water resistance and good ethanol resistance. The dispersion is recommended for combination with Liocryl acrylic emulsions. 收起 | |
LIOPUR PFL 3242 | Synthopol Chemie Germany | LIOPUR PFL 3242 is an aqueous aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. It is partly biobased, solvent- and TEA-free. Films based on LIOPUR PFL 3242 are distinguished by high toughness and resilience and tear streng...展开 LIOPUR PFL 3242 is an aqueous aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. It is partly biobased, solvent- and TEA-free. Films based on LIOPUR PFL 3242 are distinguished by high toughness and resilience and tear strength. Owing to its very high abrasion resistance and its excellent chemical resistance, especially against coffee and mustard. LIOPUR PFL 3242 can be used in combination with water-emulsifiable polyisocyanates for airdrying, aqueous, 2-pack parquet floor varnishes. 收起 | |
LIOPUR PFL 3526 | Synthopol Chemie Germany | LIOPUR PFL 3242 is an aqueous aliphatic polyurethane dispersion based on polycarbonate. It is almost solvent-free, provided with intrinsic flame protection. After air-drying coatings based on LIOPUR PFL 3526 and suitable amount of butylglycole form transp...展开 LIOPUR PFL 3242 is an aqueous aliphatic polyurethane dispersion based on polycarbonate. It is almost solvent-free, provided with intrinsic flame protection. After air-drying coatings based on LIOPUR PFL 3526 and suitable amount of butylglycole form transparent films which are tack-free and display good surface resistance, high flexibility and elasticity. Coatings based on LIOPUR PFL 3526 exhibit excellent flame protection properties. This product shows a good wet and dry appearance on wood. 收起 | |
LIOPUR PKS 2845 | Synthopol Chemie Germany | LIOPUR PKS 2845 is a solvent-free, aqueous, aliphatic polyurethane dispersion based on a polyether, APEO- and TEA-free. After air-drying coatings based on LIOPUR PKS 2845 form transparent films which are tacky at room temperature. Because of the film’s fl...展开 LIOPUR PKS 2845 is a solvent-free, aqueous, aliphatic polyurethane dispersion based on a polyether, APEO- and TEA-free. After air-drying coatings based on LIOPUR PKS 2845 form transparent films which are tacky at room temperature. Because of the film’s flexibility, even at low temperatures and resistance to hydrolysis LIOPUR PKS 2845 is especially recommended for making contact adhesives with good peel strength, used to laminate a wide range of materials. 收起 | |
N-Propyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | N-Propyl Acetate is a colorless and volatile solvent with a mild and fruity odor. It can be used in automotive and plastic coatings and as a solvent in flexographic and screen printing inks. | |
Phosphorus-Iron Powder | Changzhou Zhong Pu New Material Environmental Protection &Technology Co., Ltd. | Phosphorus-Iron Powder is a non-toxic additive for paints and coatings to provide anti-corrosion properties. It finds use in replacing zinc in applications for containers, marine vessels, conductive coatings, heat-resistant coatings, and heavy-duty anti-c...展开 Phosphorus-Iron Powder is a non-toxic additive for paints and coatings to provide anti-corrosion properties. It finds use in replacing zinc in applications for containers, marine vessels, conductive coatings, heat-resistant coatings, and heavy-duty anti-corrosion paints. 收起 | |
Propylene Glycol Monomethyl Ether | Jiangsu Ruijia Chemistry Co.,Ltd. | Propylene Glycol Monomethyl Ether is a colorless and transparent liquid. It is ideal for use as a solvent in printing inks. | |
Propylene Glycol Monomethyl Ether Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Propylene Glycol Monomethyl Ether Acetate is a colorless and transparent liquid. It can be used as an additive in paints for automobiles, refrigerators, and airplanes. | |
SYNTHALAN LS 768 | Synthopol Chemie Germany | SYNTHALAN LS 768 is an acrylic resin cross-linking with polyisocyanate. It is supplied as 60% in butylacetate. This acrylic resin is specifically designed as a paste binder, particularly for hard-to-disperse pigments. | |
SYNTHALAT A 045 | Synthopol Chemie Germany | SYNTHALAT A 045 is an acrylic resin cross-linking with polyisocyanate. It is designed for use in combination with aliphatic polyisocyanates for air- and stove-drying two-component coatings for industrial coatings with high flexibility, adhesion, and weath...展开 SYNTHALAT A 045 is an acrylic resin cross-linking with polyisocyanate. It is designed for use in combination with aliphatic polyisocyanates for air- and stove-drying two-component coatings for industrial coatings with high flexibility, adhesion, and weathering resistance. 收起 | |
SYNTHALAT A 055 | Synthopol Chemie Germany | SYNTHALAT A 055 is an acrylic resin cross-linking with polyisocyanate. It is supplied as 60% in xylene/butyl acetate. This product is recommended for use in combination with aliphatic polyisocyanates for air- and stove-drying two-component paints for indu...展开 SYNTHALAT A 055 is an acrylic resin cross-linking with polyisocyanate. It is supplied as 60% in xylene/butyl acetate. This product is recommended for use in combination with aliphatic polyisocyanates for air- and stove-drying two-component paints for industrial coatings with high flexibility, adhesion, and weathering resistance. 收起 | |
SYNTHALAT A 060 | Synthopol Chemie Germany | SYNTHALAT A 060 is an acrylic resin cross-linking with polyisocyanate. It is supplied as 60% in shellsol A. This product is recommended for use in combination with aliphatic polyisocyanates for air- and stove-drying two-component coatings for industrial p...展开 SYNTHALAT A 060 is an acrylic resin cross-linking with polyisocyanate. It is supplied as 60% in shellsol A. This product is recommended for use in combination with aliphatic polyisocyanates for air- and stove-drying two-component coatings for industrial paints with good flexibility, adhesion, and resistance to weathering. 收起 | |
SYNTHALAT A 065 | Synthopol Chemie Germany | SYNTHALAT A 065 is an acrylic resin cross-linking with polyisocyanate. It is designed for use in combination with aliphatic polyisocyanates air- and stove-drying two-component coatings for industrial coatings with high flexibility, adhesion, and weatherin...展开 SYNTHALAT A 065 is an acrylic resin cross-linking with polyisocyanate. It is designed for use in combination with aliphatic polyisocyanates air- and stove-drying two-component coatings for industrial coatings with high flexibility, adhesion, and weathering resistance. SYNTHALAT A 065 is used primarily in combination with aliphatic polyisocyanates for air- and stove-drying coatings for metals, wood and plastics. These types of 2 component coatings should be used preferably in instances where high coating qualities are required but where stoving is impossible due to the size or heat-sensitivity of the object to be coated. 收起 | |
SYNTHALAT A 077 | Synthopol Chemie Germany | SYNTHALAT A 077 is a polyisocyanate-curing resin. It is recommended for 2-pack coatings which are air- and oven-drying in combination with aliphatic polyisocyanates, for industrial coatings offering good mechanical properties plus resistance to chemical a...展开 SYNTHALAT A 077 is a polyisocyanate-curing resin. It is recommended for 2-pack coatings which are air- and oven-drying in combination with aliphatic polyisocyanates, for industrial coatings offering good mechanical properties plus resistance to chemical attack and weathering. 收起 | |
SYNTHALAT A 078 | Synthopol Chemie Germany | SYNTHALAT A 078 is a polyisocyanate-curing acrylic resin. It is recommended for 2-pack coatings which are air- and oven-drying in combination with aliphatic polyisocyanates, for industrial coatings offering good mechanical properties plus resistance to ch...展开 SYNTHALAT A 078 is a polyisocyanate-curing acrylic resin. It is recommended for 2-pack coatings which are air- and oven-drying in combination with aliphatic polyisocyanates, for industrial coatings offering good mechanical properties plus resistance to chemical attack and weathering. 收起 | |
SYNTHALAT A 085 | Synthopol Chemie Germany | SYNTHALAT A 085 is an acrylic resin cross-linking with polyisocyanate. It is recommended for use in combination with aliphatic polyisocyanates air- and stove-drying two-component coatings for industrial paints with good mechanical properties and chemical ...展开 SYNTHALAT A 085 is an acrylic resin cross-linking with polyisocyanate. It is recommended for use in combination with aliphatic polyisocyanates air- and stove-drying two-component coatings for industrial paints with good mechanical properties and chemical resistance. 收起 | |
SYNTHALAT A 086 HS | Synthopol Chemie Germany | SYNTHALAT A 086 HS is a hydroxyfunctional acrylic resin. It is designed for use in combination with (cyclo-) aliphatic polyisocyanates air- and forced-drying 2 pack coatings with high abrasion-, chemical-, and weather-resistance for general industrial coa...展开 SYNTHALAT A 086 HS is a hydroxyfunctional acrylic resin. It is designed for use in combination with (cyclo-) aliphatic polyisocyanates air- and forced-drying 2 pack coatings with high abrasion-, chemical-, and weather-resistance for general industrial coatings. This product also offers quick drying and very good adhesion on different substrates and metals. 收起 | |
SYNTHALAT A 088 MS | Synthopol Chemie Germany | SYNTHALAT A 088 MS is a polyisocyanate-curing acrylic resin. It is supplied as 60% in Shellsol A. This product is designed for 2-pack "medium-solid" industrial coatings which are air- and oven-drying in combination with aliphatic polyisocyanates, offering...展开 SYNTHALAT A 088 MS is a polyisocyanate-curing acrylic resin. It is supplied as 60% in Shellsol A. This product is designed for 2-pack "medium-solid" industrial coatings which are air- and oven-drying in combination with aliphatic polyisocyanates, offering good resistance to chemical attack and weathering. 收起 |