| Aliphatic C5 Hydrocarbon Resin E1102 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1102 is an amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1102 has an initial colour (YI) value of 2...展开 Aliphatic C5 Hydrocarbon Resin E1102 is an amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1102 has an initial colour (YI) value of 28. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E1202 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1202 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1202 has an initial colour (YI) value of 23...展开 Aliphatic C5 Hydrocarbon Resin E1202 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1202 has an initial colour (YI) value of 23. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E1204 LS | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1204 LS is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1204 LS has an initial colour (YI) value...展开 Aliphatic C5 Hydrocarbon Resin E1204 LS is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1204 LS has an initial colour (YI) value of 31. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E1304 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1304 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1304 has an initial colour (YI) value of 29...展开 Aliphatic C5 Hydrocarbon Resin E1304 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1304 has an initial colour (YI) value of 29. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E1310 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1310 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1310 has an initial colour (YI) value of 25...展开 Aliphatic C5 Hydrocarbon Resin E1310 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1310 has an initial colour (YI) value of 25. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E1401 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1401 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1401 has an initial colour (YI) value of 31...展开 Aliphatic C5 Hydrocarbon Resin E1401 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1401 has an initial colour (YI) value of 31. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E2203 LC | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E2203 LC is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer co...展开 Aliphatic C5 Hydrocarbon Resin E2203 LC is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aliphatic C5 Hydrocarbon Resin E2203 LC has an initial colour (YI) value of 23. 收起 | |
| Aliphatic C5 Hydrocarbon Resin ECR 213 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin ECR 213 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer com...展开 Aliphatic C5 Hydrocarbon Resin ECR 213 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aliphatic C5 Hydrocarbon Resin ECR 213 has an initial colour (YI) value of 87. 收起 | |
| Aliphatic C5 Hydrocarbon Resin ECR 288S | Aquent Impex | Aliphatic C5 Hydrocarbon Resin ECR 288S is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin ECR 288S has an initial colour (YI) value...展开 Aliphatic C5 Hydrocarbon Resin ECR 288S is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin ECR 288S has an initial colour (YI) value of 31. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin ECR 807 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin ECR 807 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer com...展开 Aliphatic C5 Hydrocarbon Resin ECR 807 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aliphatic C5 Hydrocarbon Resin ECR 807 has an initial colour (YI) value of 32. 收起 | |
| Aqualac AYD-127 | Aquent Impex | Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...展开 Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 180-190 (g/eq). 收起 | |
| Aqualac AYD-128 | Aquent Impex | Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...展开 Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 184-194 (g/eq). 收起 | |
| Aqualac AYD-801 | Aquent Impex | Aqualac AYD-801 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...展开 Aqualac AYD-801 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-801 has and epoxy equivalent of 450~500 (g/eq) and softening point of 65~75 (℃). 收起 | |
| Aqualac AYD-802 | Aquent Impex | Aqualac AYD-802 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...展开 Aqualac AYD-802 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-802 has and epoxy equivalent of 600~700 (g/eq) and softening point of 81~89 (℃). 收起 | |
| Aqualac AYD-803 | Aquent Impex | Aqualac AYD-803 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...展开 Aqualac AYD-803 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-803 has and epoxy equivalent of 700~900 (g/eq) and softening point of 90~96 (℃). 收起 | |
| Aqualac AYD-803U | Aquent Impex | Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...展开 Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-804 has and epoxy equivalent of 900~1000 (g/eq) and softening point of 96~107 (℃). 收起 | |
| Aqualac AYD-804 | Aquent Impex | Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...展开 Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-804 has and epoxy equivalent of 900~1000 (g/eq) and softening point of 96~107 (℃). 收起 | |
| Aqualac AYDPG- 660 | Aquent Impex | Aqualac AYDPG- 660 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 140-200 (g/eq). | |
| Aqualac AYDPG- 669 | Aquent Impex | Aqualac AYDPG- 669 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 125-143 (g/eq). | |
| Aqualac AYDPG-300 | Aquent Impex | Aqualac AYDPG-300 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 285-310 (g/eq). | |
| Aqualac AYDW-112W50 | Aquent Impex | Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epo...展开 Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epoxy makes this high performance organic & inorganic compound available with the high performance epoxy resin as a precondition. The outstanding advantage of waterborne epoxy resin lies on that this compound can be cured at atmospheric temperature & humidity with reasonable curing time. It can be mixed with such common cement-based material as cement mortar & concrete to enhance the early strength, tenacity, impact resistance & waterproof ability of above materials with very high cross-linking density. Applications include environmentally friendly, paint, car coatings, and cement floors. 收起 | |
| Aqualac AYDW-113W50 | Aquent Impex | Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epo...展开 Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epoxy makes this high performance organic & inorganic compound available with the high performance epoxy resin as a precondition. The outstanding advantage of waterborne epoxy resin lies on that this compound can be cured at atmospheric temperature & humidity with reasonable curing time. It can be mixed with such common cement-based material as cement mortar & concrete to enhance the early strength, tenacity, impact resistance & waterproof ability of above materials with very high cross-linking density. Applications include environmentally friendly, paint, car coatings, and cement floors. 收起 | |
| Aromatic C9 Hydrocarbon Resin Aquatac I100 | Aquent Impex | Aromatic C9 Hydrocarbon Resin Aquatac I100 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer...展开 Aromatic C9 Hydrocarbon Resin Aquatac I100 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aromatic C9 Hydrocarbon Resin Aquatac I100 has an Gardner colour value of 3-4. 收起 | |
| Aromatic C9 Hydrocarbon Resin Aquatac I120S | Aquent Impex | Aromatic C9 Hydrocarbon Resin Aquatac I120S is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polyme...展开 Aromatic C9 Hydrocarbon Resin Aquatac I120S is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aromatic C9 Hydrocarbon Resin Aquatac I120S has an Gardner colour value of 4-5. 收起 | |
| Aromatic C9 Hydrocarbon Resin Aquatac I140 | Aquent Impex | Aromatic C9 Hydrocarbon Resin Aquatac I140 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer...展开 Aromatic C9 Hydrocarbon Resin Aquatac I140 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aromatic C9 Hydrocarbon Resin Aquatac I140 has an Gardner colour value of 5-6. 收起 | |
| CAB-151-0.7 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in p...展开 CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-0.1 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in ...展开 CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-0.5 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...展开 CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing ...展开 CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-20 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in pr...展开 CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-551-0.01 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printi...展开 CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-551-0.2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...展开 CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| Desmocolor Black PU, VPA 503/1 | mk chemicals | Desmocolor Black PU, VPA 503/1 is a black colored pasty to liquid pigment. It has a pigment content of 15%, an organic solvents value of 35%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that ar...展开 Desmocolor Black PU, VPA 503/1 is a black colored pasty to liquid pigment. It has a pigment content of 15%, an organic solvents value of 35%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
| Desmocolor Concrete Grey, VPA 275/14 | mk chemicals | Desmocolor Concrete Grey, VPA 275/14 is a grey colored pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 20.6%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings ...展开 Desmocolor Concrete Grey, VPA 275/14 is a grey colored pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 20.6%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
| Desmocolor Cream White, VPA 275/1 | mk chemicals | Desmocolor Cream White, VPA 275/1 is a white colored pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 19%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that...展开 Desmocolor Cream White, VPA 275/1 is a white colored pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 19%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
| Desmocolor Grey White, VPA 275/2 | mk chemicals | Desmocolor Grey White, VPA 275/2 is a pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 19%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on ro...展开 Desmocolor Grey White, VPA 275/2 is a pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 19%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
| Desmocolor Nut Brown, VPA 275/10 | mk chemicals | Desmocolor Nut Brown, VPA 275/10 is a brown colored pasty to liquid pigment. It has a pigment content of 58%, an organic solvents value of 26%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that ...展开 Desmocolor Nut Brown, VPA 275/10 is a brown colored pasty to liquid pigment. It has a pigment content of 58%, an organic solvents value of 26%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
| Desmocolor Olive Green, VPA 275/15 | mk chemicals | Desmocolor Olive Green, VPA 275/15 is a green colored pasty to liquid pigment. It has a pigment content of 69%, an organic solvents value of 17%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings tha...展开 Desmocolor Olive Green, VPA 275/15 is a green colored pasty to liquid pigment. It has a pigment content of 69%, an organic solvents value of 17%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
| Desmocolor Pebble Grey, VPA 275/4 | mk chemicals | Desmocolor Pebble Grey, VPA 275/4 is a grey colored pasty to liquid pigment. It has a pigment content of 67.3%, an organic solvents value of 18.3%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings t...展开 Desmocolor Pebble Grey, VPA 275/4 is a grey colored pasty to liquid pigment. It has a pigment content of 67.3%, an organic solvents value of 18.3%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
| Desmocolor White PU, VPA 434 | mk chemicals | Desmocolor White PU, VPA 434 is a white colored pasty to liquid pigment. It has a pigment content of 70%, an organic solvents value of 14%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are ...展开 Desmocolor White PU, VPA 434 is a white colored pasty to liquid pigment. It has a pigment content of 70%, an organic solvents value of 14%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
| Diethylene Glycol Ethyl Ether Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Diethylene Glycol Ethyl Ether Acetate appears as a colorless and transparent liquid. It can be used as a coalescing aid for emulsion paints. It is also ideal for use to slow drying in nitrocellulose lacquers, natural paints, or spray paint. | |
| Dipropylene Glycol Monomethyl Ether | Jiangsu Ruijia Chemistry Co.,Ltd. | Dipropylene Glycol Monomethyl Ether is a colorless and transparent liquid. It can be used as a solvent in water-based paints and screen-printing inks. It can also be used as the coupling agent (often mix) of dilute aqueous coatings. | |
| Ethylene Glycol Ethyl Ether Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Ethylene Glycol Ethyl Ether Acetate is a colorless and transparent liquid. It can be used as a solvent in protective coatings and inks, as well as a solvent for painting metal and furniture. | |
| Ethylene Glycol Monobutyl Ether | Jiangsu Ruijia Chemistry Co.,Ltd. | Ethylene Glycol Monobutyl Ether is a colorless and transparent liquid. It can be used as a solvent in paint and as a solvent in enamel paint remover. | |
| Ethylene Glycol Monobutyl Ether Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Ethylene Glycol Monobutyl Ether Acetate is a colorless and transparent liquid. It can be used as a coalescing aid in emulsion paints. It can also be used in emulsion coatings. | |
| Ethylene Glycol Monoethyl Ether | Jiangsu Ruijia Chemistry Co.,Ltd. | Ethylene Glycol Monoethyl Ether is a colorless and transparent liquid. It can be used as a solvent in paints and printing inks. It is also used in the preparation of paint thinner and as a raw material for paint. | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| Isobutyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Isobutyl Acetate is a clear liquid without precipitates. It can be used in coatings and as a solvent in polymer paints, adhesives, and isocyanate lacquers. | |
| Isooctyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Isooctyl Acetate is a clear liquid with a pleasant, fruity fragrance. It is used to promote flow and retard blushing in formulations such as lacquers, lacquers emulsions in screen inks, parking enamels and air-dry enamels. | |
| Isopropyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Isopropyl Acetate is a colorless liquid with a strong, fruity odor. This product is a fast-evaporating solvent. It is used in gravure printing inks for plastic films such as bread wrap. The rest finds many uses in coatings and adhesives. | |
| MK Fluo Blue, VPA 596/7 | mk chemicals | MK Fluo Blue, VPA 596/7 is a blue colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
| MK Fluo Yellow, VPA 596/3 | mk chemicals | MK Fluo Yellow, VPA 596/3 is a yellow colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
| MK-Ecomarker Black, VPA 672/9 | mk chemicals | MK-Ecomarker Black, VPA 672/9 is a black colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.87 grams per cubic centimeter. This product is used in solvent borne paints mainly in...展开 MK-Ecomarker Black, VPA 672/9 is a black colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.87 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
| MK-Ecomarker Neon Blue, VPA 672/5 | mk chemicals | MK-Ecomarker Neon Blue, VPA 672/5 is a blue colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.98 grams per cubic centimeter. This product is used in solvent borne paints mainly...展开 MK-Ecomarker Neon Blue, VPA 672/5 is a blue colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.98 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
| MK-Ecomarker Neon Green, VPA 672/4 | mk chemicals | MK-Ecomarker Neon Green, VPA 672/4 is a green colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints main...展开 MK-Ecomarker Neon Green, VPA 672/4 is a green colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
| MK-Ecomarker Neon Orange, VPA 672/3 | mk chemicals | MK-Ecomarker Neon Orange, VPA 672/3 is an orange colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints m...展开 MK-Ecomarker Neon Orange, VPA 672/3 is an orange colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
| MK-Ecomarker Neon Pink, VPA 672/1 | mk chemicals | MK-Ecomarker Neon Pink, VPA 672/1 is a pink colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly...展开 MK-Ecomarker Neon Pink, VPA 672/1 is a pink colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
| MK-Ecomarker Neon Red, VPA 672 | mk chemicals | MK-Ecomarker Neon Red, VPA 672 is a red colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in ...展开 MK-Ecomarker Neon Red, VPA 672 is a red colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
| MK-Ecomarker Neon Yellow, VPA 672/2 | mk chemicals | MK-Ecomarker Neon Yellow, VPA 672/2 is a yellow colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints ma...展开 MK-Ecomarker Neon Yellow, VPA 672/2 is a yellow colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
| MK-Ecomarker White, VPA 672/10 | mk chemicals | MK-Ecomarker White, VPA 672/10 is a white colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 1.06 grams per cubic centimeter. This product is used in solvent borne paints mainly i...展开 MK-Ecomarker White, VPA 672/10 is a white colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 1.06 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
| MK-Epoxycolor 102 Sand Yellow | mk chemicals | MK-Epoxycolor 102 Sand Yellow is a yellow colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 111 Brown Beige | mk chemicals | MK-Epoxycolor 111 Brown Beige is a pasty to liquid pigment. It has a pigment content of 44%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 120 Olive Yellow | mk chemicals | MK-Epoxycolor 120 Olive Yellow is a pasty to liquid pigment. It has a pigment content of 47%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 313 Tomato Red | mk chemicals | MK-Epoxycolor 313 Tomato Red is a red colored pasty to liquid pigment. It has a pigment content of 40%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 602 Leaf Green | mk chemicals | MK-Epoxycolor 602 Leaf Green is a green colored pasty to liquid pigment. It has a pigment content of 36%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 621 Pale Green | mk chemicals | MK-Epoxycolor 621 Pale Green is a green colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 700 Squirrel Grey | mk chemicals | MK-Epoxycolor 700 Squirrel Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 723 Concrete Grey | mk chemicals | MK-Epoxycolor 723 Concrete Grey is a grey colored pasty to liquid pigment. It has a pigment content of 49%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 730 Stone Grey | mk chemicals | MK-Epoxycolor 730 Stone Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 731 Blue Grey | mk chemicals | MK-Epoxycolor 731 Blue Grey is a pasty to liquid pigment. It has a pigment content of 48%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 732 Pebble Grey | mk chemicals | MK-Epoxycolor 732 Pebble Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 733 Cement Grey | mk chemicals | MK-Epoxycolor 733 Cement Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 735 Light Grey | mk chemicals | MK-Epoxycolor 735 Light Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 738 Agate Grey | mk chemicals | MK-Epoxycolor 738 Agate Greyis a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor Black P. Bk. 11 | mk chemicals | MK-Epoxycolor Black P. Bk. 11 is a black colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.91 grams per cubic centimeter. This product is used in the preparation...展开 MK-Epoxycolor Black P. Bk. 11 is a black colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.91 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
| MK-Epoxycolor Blue P. B. 15:1 | mk chemicals | MK-Epoxycolor Blue P. B. 15:1 is a blue colored pasty to liquid pigment. It has a pigment content of 16%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.21 grams per cubic centimeter. This product is used in the preparation ...展开 MK-Epoxycolor Blue P. B. 15:1 is a blue colored pasty to liquid pigment. It has a pigment content of 16%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.21 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
| MK-Epoxycolor Bright Red P. R. 112 | mk chemicals | MK-Epoxycolor Bright Red P. R. 112 is a red colored pasty to liquid pigment. It has a pigment content of 25%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.19 grams per cubic centimeter. This product is used in the preparat...展开 MK-Epoxycolor Bright Red P. R. 112 is a red colored pasty to liquid pigment. It has a pigment content of 25%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.19 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
| MK-Epoxycolor Bright Yellow P. Y. 74 | mk chemicals | MK-Epoxycolor Bright Yellow P. Y. 74 is a yellow colored pasty to liquid pigment. It has a pigment of 30%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.28 grams per cubic centimeter. This product is used in the preparation...展开 MK-Epoxycolor Bright Yellow P. Y. 74 is a yellow colored pasty to liquid pigment. It has a pigment of 30%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.28 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
| MK-Epoxycolor Green P. G. 17 | mk chemicals | MK-Epoxycolor Green P. G. 17 is a green colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.94 grams per cubic centimeter. This product is used in the preparation ...展开 MK-Epoxycolor Green P. G. 17 is a green colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.94 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
| MK-Epoxycolor Red P. R. 101 | mk chemicals | MK-Epoxycolor Red P. R. 101 is a red colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.92 grams per cubic centimeter. This product is used in the preparation of ...展开 MK-Epoxycolor Red P. R. 101 is a red colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.92 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
| MK-Epoxycolor White P. W. 6 | mk chemicals | MK-Epoxycolor White P. W. 6 is a white colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.87 grams per cubic centimeter. This product is used in the preparation o...展开 MK-Epoxycolor White P. W. 6 is a white colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.87 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
| MK-Epoxycolor Yellow P. Y. 42 | mk chemicals | MK-Epoxycolor Yellow P. Y. 42 is a yellow colored pasty to liquid pigment. It has a pigment content of 40%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.63 grams per cubic centimeter. This product is used in the preparatio...展开 MK-Epoxycolor Yellow P. Y. 42 is a yellow colored pasty to liquid pigment. It has a pigment content of 40%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.63 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
| MK-Fluo Green, VPA 596/1 | mk chemicals | MK-Fluo Green, VPA 596/1 is a green colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
| MK-Fluo Orange, VPA 596/5 | mk chemicals | MK-Fluo Orange, VPA 596/5 is an orange colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
| MK-Fluo Pink, VPA 596/4 | mk chemicals | MK-Fluo Pink, VPA 596/4 is a pink colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. |
