| 100 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 100 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 95% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant ...展开 100 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 95% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. 收起 | |
| 120 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 120 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 95% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant ...展开 120 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 95% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. 收起 | |
| 120N Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 120N Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant...展开 120N Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. 收起 | |
| 125 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 125 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant ...展开 125 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. 收起 | |
| 129 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 129 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 80% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant ...展开 129 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 80% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. 收起 | |
| 130A Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 130A Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant...展开 130A Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. 收起 | |
| 130B Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 130B Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant...展开 130B Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. 收起 | |
| 130H Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 130H Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant...展开 130H Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. 收起 | |
| 130S Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 130S Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant...展开 130S Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. 收起 | |
| 140 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 140 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant ...展开 140 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. 收起 | |
| 160 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 160 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant ...展开 160 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. 收起 | |
| 180 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 180 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant ...展开 180 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. 收起 | |
| 190 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 190 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant ...展开 190 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. 收起 | |
| 190-1 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 190-1 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 95% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a coloran...展开 190-1 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 95% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. 收起 | |
| 190-2 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 190-2 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 95% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a coloran...展开 190-2 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 95% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. 收起 | |
| 190-6 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 190-6 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 95% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a coloran...展开 190-6 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 95% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. 收起 | |
| 190-8 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 190-8 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 94% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a coloran...展开 190-8 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 94% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. 收起 | |
| 190-9 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 190-9 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 94% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a coloran...展开 190-9 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 94% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. 收起 | |
| 2 Fast Green G | Hangzhou Jiekai Chemical Co., Ltd. | 2 Fast Green G is a dye in the phthalocyanine chemical family that can be used in paints, in inks, and in textile printing applications. This product's density is 1.6 g/cm3 and its pH value is 7.0. Its molecular weight ranges between 1029-1127. | |
| 220 Fast Red | Hangzhou Jiekai Chemical Co., Ltd. | 220 Fast Red is a red crystal powder inorganic pigment comprised of iron oxide materials. It is designed for use as a colorant in paints and printing inks. It can be used alone or with other tinting pigments. | |
| 221 Pigment Violet | Hangzhou Jiekai Chemical Co., Ltd. | 221 Pigment Violet is a red crystal powder, inorganic pigment comprised of iron oxide materials. It is designed for use as a colorant in paints and printing inks. It can be used alone or with other tinting pigments. | |
| 222 Fast Red | Hangzhou Jiekai Chemical Co., Ltd. | 222 Fast Red is a red crystal powder, inorganic pigment comprised of iron oxide materials. It is designed for use as a colorant in paints and printing inks. It can be used alone or with other tinting pigments. | |
| 223 Fast Red | Hangzhou Jiekai Chemical Co., Ltd. | 223 Fast Red is a red crystal powder, inorganic pigment comprised of iron oxide materials. It is designed for use as a colorant in paints and printing inks. It can be used alone or with other tinting pigments. | |
| 230 Iron Oxide Red | Hangzhou Jiekai Chemical Co., Ltd. | 230 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant ...展开 230 Iron Oxide Red is a red crystal powder inorganic pigment comprised of 96% minimum Fe2O3. It is insoluble in water, soluble in hydrochloric acid and sulphuric acid and slightly soluble in nitric acid and alcohols. It is designed for use as a colorant in paints and printing inks. 收起 | |
| 311 Iron Oxide Yellow | Hangzhou Jiekai Chemical Co., Ltd. | 311 Iron Oxide Yellow is a yellow crystal powder inorganic pigment comprised of 86% minimum Fe2O3. It is insoluble in water and alcohols, soluble in acids. It is designed for use as a colorant in paint and printing inks. | |
| 3110 Red Toner C | Hangzhou Jiekai Chemical Co., Ltd. | 3110 Red Toner C is a barium-complex dye that can be used in offset or transparent inks. This product's density is 1.8 g/cm3 and its pH value is 7.0. Its molecular weight is 888.98. | |
| 313 Iron Oxide Yellow | Hangzhou Jiekai Chemical Co., Ltd. | 313 Iron Oxide Yellow is a yellow crystal powder inorganic pigment comprised of 86% minimum Fe2O3. It is insoluble in water and alcohols, soluble in acids. It is designed for use as a colorant in paint and printing inks. | |
| 313 R Iron Oxide Yellow | Hangzhou Jiekai Chemical Co., Ltd. | 313 R Iron Oxide Yellow is a yellow crystal powder inorganic pigment comprised of 86% minimum Fe2O3. It is insoluble in water and alcohols, soluble in acids. It is designed for use as a colorant in paint and printing inks. | |
| 3135 Fast Red F2R | Hangzhou Jiekai Chemical Co., Ltd. | 3135 Fast Red F2R is a naphthol red pigment that can be used in aqueous inks and textile printing applications. This product's density is 1.7 g/cm3 and its pH value is 6.5. Its molecular weight is 436.29. | |
| 313S Iron Oxide Yellow | Hangzhou Jiekai Chemical Co., Ltd. | 313S Iron Oxide Yellow is a yellow crystal powder inorganic pigment comprised of 86% minimum Fe2O3. It is insoluble in water and alcohols, soluble in acids. It is designed for use as a colorant in paint and printing inks. | |
| 318 Iron Oxide Black | Hangzhou Jiekai Chemical Co., Ltd. | 318 Iron Oxide Black is a black crystal powder inorganic pigment comprised of 95% minimum Fe3O4. It is insoluble in water and alcohols, soluble in concentrated strong acids. It is used as a colorant in paints, printing inks and coatings. | |
| 330 Iron Oxide Black | Hangzhou Jiekai Chemical Co., Ltd. | 330 Iron Oxide Black is a black crystal powder inorganic pigment comprised of 90% minimum Fe3O4. It is insoluble in water and alcohols, soluble in concentrated strong acids. It is used as a colorant in paints, printing inks and coatings. | |
| 5330 Iron Oxide Black | Hangzhou Jiekai Chemical Co., Ltd. | 5330 Iron Oxide Black is a black crystal powder inorganic pigment comprised of 90% minimum Fe3O4. It is insoluble in water and alcohols, soluble in concentrated strong acids. It is used as a colorant in paints, printing inks and coatings. | |
| 586 Iron Oxide Yellow | Hangzhou Jiekai Chemical Co., Ltd. | 586 Iron Oxide Yellow is a yellow crystal powder inorganic pigment comprised of 86% minimum Fe2O3. It is insoluble in water and alcohols, soluble in acids. It is designed for use as a colorant in paint and printing inks. | |
| 587 Iron Oxide Yellow | Hangzhou Jiekai Chemical Co., Ltd. | 587 Iron Oxide Yellow is a yellow crystal powder inorganic pigment comprised of 86% minimum Fe2O3. It is insoluble in water and alcohols, soluble in acids. It is designed for use as a colorant in paint and printing inks. | |
| 722 Iron Oxide Black | Hangzhou Jiekai Chemical Co., Ltd. | 722 Iron Oxide Black is a black crystal powder inorganic pigment comprised of 95% minimum Fe3O4. It is insoluble in water and alcohols, soluble in concentrated strong acids. It is used as a colorant in paints, printing inks and coatings. | |
| 723 Iron Oxide Black | Hangzhou Jiekai Chemical Co., Ltd. | 723 Iron Oxide Black is a black crystal powder inorganic pigment comprised of 95% minimum Fe3O4. It is insoluble in water and alcohols, soluble in concentrated strong acids. It is used as a colorant in paints, printing inks and coatings. | |
| Benzidine Orange R | Hangzhou Jiekai Chemical Co., Ltd. | Benzidine Orange R is a dianisidine dye that can be used in solvent inks, aqueous inks, and in aqueous coatings. This product's density is 1.4 g/cm3 and its pH value is 7.0. Its molecular weight is 620.72. | |
| Benzidine Yellow G | Hangzhou Jiekai Chemical Co., Ltd. | Benzidine Yellow G is a diarylide yellow dye that can be used in offset inks, solvent inks, aqueous inks, and aqueous coatings. This product's density is 1.5 g/cm3 and its pH value is 6.5. Its molecular weight is 629.49. | |
| Benzidine Yellow GG | Hangzhou Jiekai Chemical Co., Ltd. | Benzidine Yellow GG is a diarylide yellow dye that can be used in semi-transparent inks, aqueous inks, or aqueous coatings. This product's density is 1.5 g/cm3 and its pH value is 6.5. Its molecular weight is 629.49. | |
| Benzidine Yellow GR | Hangzhou Jiekai Chemical Co., Ltd. | Benzidine Yellow GR is a diarylide yellow dye that can be used in aqueous or semi-transparent inks. This product's density is 1.5 g/cm3 and its pH value is 6.5. Its molecular weight is 629.49. | |
| Benzidine Yellow GR-B | Hangzhou Jiekai Chemical Co., Ltd. | Benzidine Yellow GR-B is a diarylide yellow dye that can be used in semi-transparent inks, aqueous inks, and in aqueous coatings. This product's density is 1.5 g/cm3 and its pH value is 7.0. Its molecular weight is 685.60. | |
| Benzimidazolone Orange HL | Hangzhou Jiekai Chemical Co., Ltd. | Benzimidazolone Orange HL is a chlorinated azo dye that can be used in offset inks, solvent inks, aqueous inks, paints, and in textile printing applications. This product's density is 1.4 g/cm3 and its pH value is 6.5. Its molecular weight is 416.81. | |
| Brilliant Red 2BL | Hangzhou Jiekai Chemical Co., Ltd. | Brilliant Red 2BL is a calcium red dye that can be used in solventborne or transparent inks. This product's density is 1.8 g/cm3 and its pH value is 7.0. Its molecular weight is 458.90. | |
| CAB-151-0.7 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in p...展开 CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-0.1 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in ...展开 CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-0.5 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...展开 CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing ...展开 CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-20 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in pr...展开 CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-551-0.01 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printi...展开 CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-551-0.2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...展开 CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| Dark Chrome Yellow | Hangzhou Jiekai Chemical Co., Ltd. | Dark Chrome Yellow is a lead chromate dye that can be used in paints, printing inks, and in stationery. This product contains greater than 85% lead chromate and absorbs less than 20% oil. | |
| Dehydran® P 3615 | BASF Formulation Additives 巴斯夫配方助剂 | 基于烷基聚醚和改性脂肪族化合物的乳液配方用抑泡消泡剂。 | |
| Diethylene Glycol Ethyl Ether Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Diethylene Glycol Ethyl Ether Acetate appears as a colorless and transparent liquid. It can be used as a coalescing aid for emulsion paints. It is also ideal for use to slow drying in nitrocellulose lacquers, natural paints, or spray paint. | |
| Dipropylene Glycol Monomethyl Ether | Jiangsu Ruijia Chemistry Co.,Ltd. | Dipropylene Glycol Monomethyl Ether is a colorless and transparent liquid. It can be used as a solvent in water-based paints and screen-printing inks. It can also be used as the coupling agent (often mix) of dilute aqueous coatings. | |
| DISPEX® AA 4030 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® AA 4030 is an effective polymeric dispersing agent based on acrylic acid ammonium salt. | |
| DISPEX® AA 4135 NA | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® AA 4135 is an effective polymeric dispersing agent based on acrylic acid sodium salt. | |
| DISPEX® AA 4140 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® AA 4140 is a derivative of a family of highly effective, low viscosity dispersing agents for water-borne coating systems. The product is especially suited for the dispersion of inorganic pigments. DISPEX® AA 4140 is a solution of a sodium salt of ...展开 DISPEX® AA 4140 is a derivative of a family of highly effective, low viscosity dispersing agents for water-borne coating systems. The product is especially suited for the dispersion of inorganic pigments. DISPEX® AA 4140 is a solution of a sodium salt of an acrylic polymer in water. This straw colored liquid is effective over a pH range 5-12 and up to temperatures in excess of 100°C. Compared with inorganic dispersing agents, e.g. polyphosphate products, the organic polymer based DISPEX® N40 provides improved storage stability of both the pigment dispersion and the formulated paint. There is little or no adverse reaction to high temperatures or pH changes. 收起 | |
| Dispex® AA S 760 | BASF Formulation Additives 巴斯夫配方助剂 | 水性颜料的分散剂，和聚乙烯丙烯酸，聚乙烯丙烯酸酯，苯乙烯丁二烯和它们的共聚物相容 | |
| Dispex® AA S040 | BASF Formulation Additives 巴斯夫配方助剂 | 用于水性颜填料、色浆及制陶业的润湿分散剂。 | |
| DISPEX® CX 4230 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4230 is a low VOC, low odor hydrophobic dispersant for interior and exterior architectural coatings. It is used to disperse titanium dioxide and extender pigments. It is added levels ranging from 1.05 to 3.0% based on pigment solids. | |
| Dispex® CX 4231 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® CX 4231 (以前的Ultradispers® AB 30)是一种羧酸共聚物的多铵盐。它具有显著的憎水性，可减少拖尾和吸水性 | |
| Dispex® CX 4234 | BASF Formulation Additives 巴斯夫配方助剂 | 用于内外墙建筑涂料的疏水性分散剂。 | |
| DISPEX® CX 4240 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4240 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of an ammonium salt of an acrylic copolymer in...展开 DISPEX® CX 4240 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of an ammonium salt of an acrylic copolymer in water. The copolymer is manufactured to a relatively narrow molecular weight distribution thus resulting in a consistent product quality with maximum effectiveness. The special copolymer backbone is designed for complete compatibility with polypropylene and hexylene glycols used in high proportions in water-borne high gloss coatings to promote wet edge time. 收起 | |
| DISPEX® CX 4320 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4320 is a particularly effective dispersing agent for dispersing inorganic fillers and pigments. It improves wet scrub and blocking resistance. It is a sodium salt of a carboxylic acid polymer in water and is particularly effective for dispersi...展开 DISPEX® CX 4320 is a particularly effective dispersing agent for dispersing inorganic fillers and pigments. It improves wet scrub and blocking resistance. It is a sodium salt of a carboxylic acid polymer in water and is particularly effective for dispersing inorganic fillers and pigments in high gloss, semi-gloss and highly filled interior paints. It also improves wet-scrub resistance, blocking resistance and has excellent ZnO-compatibility. 收起 | |
| DISPEX® CX 4340 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4340 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of a sodium salt of an acrylic copolymer in wa...展开 DISPEX® CX 4340 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of a sodium salt of an acrylic copolymer in water. The copolymer is manufactured to a relatively narrow molecular weight distribution thus resulting in a consistent product quality with maximum effectiveness. The special copolymer backbone is designed for complete compatibility with polypropylene and hexylene glycols used in high proportions in water-borne high gloss coatings to promote wet edge time. 收起 | |
| Dispex® CX 4345 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® CX 4345 (以前的Ultradispers® MD 21)是一种高效羧酸共聚物的多钠盐的水溶液。它的憎水性可大大改善其耐湿擦洗性 | |
| DISPEX® CX 4910 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4910 is a highly effective dispersing agent for systems, which are supplied as ‘dry systems’ and require addition of water for activation prior to their use. Typical applications examples are plasters, wall finishes, cement and tile adhesives. ...展开 DISPEX® CX 4910 is a highly effective dispersing agent for systems, which are supplied as ‘dry systems’ and require addition of water for activation prior to their use. Typical applications examples are plasters, wall finishes, cement and tile adhesives. DISPEX® CX 4910 is a sodium salt of an acrylic polymer. For the production of systems, traded as ‘dry systems’, DISPEX® CX 4910 is typically incorporated into the dry powder mix by a normal dry blending operation. Upon wetting of such a ‘dry system’ a waterbased paste/slurry is generated. DISPEX® CX 4910 is effective over a pH range 5-12 and up to temperatures in excess of 100°C. 收起 | |
| Dispex® Ultra FA 4401 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® Ultra FA 4401 (formerly Pluracoat® Dispersal DA 120) is a non-ionic surfactant with excellent pigment wetting and dispersing properties. It is compatible with other nonionic, anionic, and cationic surfactants. | |
| DISPEX® Ultra FA 4404 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4404 is a partially neutralized chelating agent suitable for use in the manufacture of pigment suspensions, emulsion paints, slurries, mainly inorganic pigments, viscosity reducer. It combines the properties of a chelating agent and polyp...展开 DISPEX® Ultra FA 4404 is a partially neutralized chelating agent suitable for use in the manufacture of pigment suspensions, emulsion paints, slurries, mainly inorganic pigments, viscosity reducer. It combines the properties of a chelating agent and polyphosphate with those of an organic dispersant thus yielding highly concentrated, stable and low-viscosity inorganic pigment suspensions, e. g. TiO2-slurries. 收起 | |
| DISPEX® Ultra FA 4416 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-...展开 DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-emulsions. With its excellent wetting properties, DISPEX® Ultra FA 4416 when used with inorganic and organic pigments produces a high gloss and good color development in low and co-solvent free systems. DISPEX® Ultra FA 4416 prevents rub-out effects by using critical pigment combinations, e.g. titanium dioxide / phthalo blue. It is suitable for air and oven drying coatings as well as baking coatings. Since DISPEX® Ultra FA 4416 has no effect on pot-life it is also recommended for aqueous 2 pack PUR coatings. It allows the formulation of economical inorganic slurries and pigment concentrates for emulsion paints and consumer coatings. Here it combines the advantages of a low paste-viscosity with anti-settling characteristics and excellent compatibility to all types of aqueous base-paints. 收起 | |
| DISPEX® Ultra FA 4420 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4420 is a fatty acid modified polyester that stabilizes inorganic and organic pigments in water and solvents. It provides maximum color development, higher pigment loading and optimum color acceptance. This product is used for universal c...展开 DISPEX® Ultra FA 4420 is a fatty acid modified polyester that stabilizes inorganic and organic pigments in water and solvents. It provides maximum color development, higher pigment loading and optimum color acceptance. This product is used for universal colorants for decorative paints. When using universal colorants in decorative paints, the addition of DISPEX® Ultra FA 4420 to the base paints (water and solvent) can increase compatibility and color acceptance and prevents de-wetting of the colorants. DISPEX® Ultra FA 4420 is an activator for Bentonites as well as for associated and acrylic thickeners. 收起 | |
| DISPEX® Ultra FA 4425 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4425 stabilizes all kinds of pigments and extenders in water- and solvent-based systems, especially in decorative coatings. In addition it makes polar ingredients of universal colorants more compatible with non-polar solvent-based paints ...展开 DISPEX® Ultra FA 4425 stabilizes all kinds of pigments and extenders in water- and solvent-based systems, especially in decorative coatings. In addition it makes polar ingredients of universal colorants more compatible with non-polar solvent-based paints into which they may be incorporated. This results in: maximum color development of the colorant based on DISPEX® Ultra FA 4425, optimum color acceptance of universal colorants in base-paints, and higher pigment loading in colorants. DISPEX® Ultra FA 4425, used as a single wetting and dispersing agent, is considered suitable for VOC-free applications, particularly universal colorants. When using universal colorants in decorative paints, the addition of DISPEX® Ultra FA 4425 to the base paints (water and solvent) can increase compatibility and color acceptance, especially in water-based and ultra-low aromatic content decorative paints. 收起 | |
| Dispex® Ultra FA 4430 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® Ultra FA 4430 (以前的Lumiten® N-OC 30) 是一种非离子型表面活性剂，可用于改善乳胶漆的储存稳定性及其与水泥和石灰的相容性 | |
| DISPEX® Ultra FA 4431 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4431 is a wetting and dispersing agent for inorganic pigments and fillers in solventbased, solvent-free and water-based systems. It can be used in all solvent-based and solvent-free industrial and decorative coating systems. It is especia...展开 DISPEX® Ultra FA 4431 is a wetting and dispersing agent for inorganic pigments and fillers in solventbased, solvent-free and water-based systems. It can be used in all solvent-based and solvent-free industrial and decorative coating systems. It is especially suitable for wetting, dispersion and stabilization of inorganic pigments and fillers in solvent-free epoxy and polyurethane systems, like flooring or pipe-line coatings. DISPEX® Ultra FA 4431 can also be used to decrease the viscosity of water-based resin-free inorganic pigment concentrates, based on high molecular weight dispersing agents like DISPEX® Ultra PA 4550. In addition DISPEX® Ultra FA 4431 is suitable for dispersion and stabilization of inorganic pigments and fillers in water-based decorative paints based on acrylic emulsions, achieving a better rheology and improved gloss. 收起 | |
| DISPEX® Ultra FA 4437 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4437 is a silicone-free surface active flow additive and colour acceptance improver for aqueous systems based on emulsions and aqueous resins. Due to its good wetting properties DISPEX® Ultra FA 4437 ensures better wetting of difficult-to...展开 DISPEX® Ultra FA 4437 is a silicone-free surface active flow additive and colour acceptance improver for aqueous systems based on emulsions and aqueous resins. Due to its good wetting properties DISPEX® Ultra FA 4437 ensures better wetting of difficult-to-wet substrates. The emulsifying effect of this product also prevents surface defects such as craters, fisheyes, pinholes and streaks caused by incompatible components. Furthermore, DISPEX® Ultra FA 4437 has a strong affinity to pigment surfaces thereby reducing color acceptance problems. 收起 | |
| DISPEX® Ultra FA 4480 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4480 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. DISPEX® Ultra...展开 DISPEX® Ultra FA 4480 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. DISPEX® Ultra FA 4480 also provides outstanding flow properties even at high pigment load. In topcoats based on different binder types DISPEX® Ultra FA 4480 improves pigment wetting and therefore increases gloss and color intensity of the paint, especially in combination with organic pigments. This product also shows excellent results in waterbased alkyds, polyester resins as also in aqueous polyurethane emulsions. 收起 | |
| Dispex® Ultra FA 4483 | BASF Formulation Additives 巴斯夫配方助剂 | 无机颜料分散剂和乳胶制备的稳定表面活性剂 | |
| DISPEX® Ultra PA 4503 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PA 4503 is a dispersing resin with self-emulsifying properties. In combination with DISPEX® Ultra PA 4503, it is suitable for the production of VOC free pigment concentrates. The excellent compatibility of this combination with both water- a...展开 DISPEX® Ultra PA 4503 is a dispersing resin with self-emulsifying properties. In combination with DISPEX® Ultra PA 4503, it is suitable for the production of VOC free pigment concentrates. The excellent compatibility of this combination with both water- and solvent-based decorative paint systems means these concentrates are suitable for the production of tinting systems where only low shear forces (shaking machines) are used. The chemical character of DISPEX® Ultra PA 4503 makes it suitable for systems with a wide pH range (5–12). 收起 | |
| Dispex® Ultra PA 4516 | BASF Formulation Additives 巴斯夫配方助剂 | 开发作为颜料研磨树脂，用于水性油墨。可作为单一树脂组分用于颜料研磨基料，该基料随后可用作开稀阶段使用其他担体的水性油墨基底 | |
| DISPEX® Ultra PA 4550 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PA 4550 is a modified polyacrylate that stabilizes the pigment dispersion of inorganic and organic pigments and improves gloss, color strength, flocculation stability, and anti-flooding behavior. This product is used as a dispersing agent. D...展开 DISPEX® Ultra PA 4550 is a modified polyacrylate that stabilizes the pigment dispersion of inorganic and organic pigments and improves gloss, color strength, flocculation stability, and anti-flooding behavior. This product is used as a dispersing agent. DISPEX® Ultra PA 4550 is pH-independent and has a broad compatibility in most commonly used water-based coatings. It is completely water-soluble and does not need to be neutralized. 收起 | |
| DISPEX® Ultra PA 4560 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PA 4560 is a modified polyacrylate that is pH-independent and has a wide-spread compatibility in most commonly used waterborne decorative coatings. It provides improved gloss, color strength, flocculation stability and anti-flooding behavior...展开 DISPEX® Ultra PA 4560 is a modified polyacrylate that is pH-independent and has a wide-spread compatibility in most commonly used waterborne decorative coatings. It provides improved gloss, color strength, flocculation stability and anti-flooding behavior. DISPEX® Ultra PA 4560 is, in combination with DISPEX® Ultra PA 4503, suitable to formulate VOC-free tinting concentrates for both water- and solvent-based decorative paints. These concentrates have excellent compatibility and can therefore be incorporated by the use of low shear forces (shaking machines). 收起 | |
| Dispex® Ultra PA 4580 | BASF Formulation Additives 巴斯夫配方助剂 | 稳定有机颜料和无机颜料，在色浆中有强降黏效果，提高光泽，防止浮色和发花，提高颜料着色力，抗絮凝 | |
| Dispex® Ultra PA 4590 | BASF Formulation Additives 巴斯夫配方助剂 | 经济型高分子分散剂，用于各类水性工业涂料和颜料色浆中 | |
| DISPEX® Ultra PX 4275 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PX 4275 is a polymeric wetting and dispersing agent for high quality aqueous coatings and pigment pastes. It is suitable for air and oven dried coatings. Since DISPEX® Ultra PX 4275 has no effect on pot-life it is recommended for aqueous 2 p...展开 DISPEX® Ultra PX 4275 is a polymeric wetting and dispersing agent for high quality aqueous coatings and pigment pastes. It is suitable for air and oven dried coatings. Since DISPEX® Ultra PX 4275 has no effect on pot-life it is recommended for aqueous 2 pack PUR coating. This product has a low foaming tendency and to the best of our knowledge has no negative influence on the water and corrosion resistance. DISPEX® Ultra PX 4275 is used in combination with zinc oxid, an increase of viscosity may occur. 收起 | |
| DISPEX® Ultra PX 4575 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra ...展开 DISPEX® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra PX 4575 is especially suited for the dispersion of pigments in waterborne coatings and colorants. 收起 | |
| DISPEX® Ultra PX 4585 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PX 4585 is a waterborne dispersant of the acrylate block copolymer family of products made by controlled free radical polymerization (CFRP). This technology allows formulating polymeric dispersants with defined polymer architecture and a low...展开 DISPEX® Ultra PX 4585 is a waterborne dispersant of the acrylate block copolymer family of products made by controlled free radical polymerization (CFRP). This technology allows formulating polymeric dispersants with defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra PX 4585 is especially suited for the dispersion of pigments in water-based coatings. DISPEX® Ultra PX 4585 offers high efficiency in stabilizing pigments and demonstrates wide compatibility with many water-based resin systems. This makes DISPEX® Ultra PX 4585 ideally suited for the use of the concept of resin-free pigment concentrates (RFPC). 收起 | |
| Efka® 3650 N | BASF Formulation Additives 巴斯夫配方助剂 | Efka® 3650 N可降低有机涂料体系的表面张力。其良好的相容性使之可有效防缩孔并提供流平控制。它的物理状态为浅黄色液体。Efka® 3650 N尤其适合用于基于醇酸的烤瓷漆、丙烯酸或聚酯树脂、聚氨酯涂料，双组份环氧涂料和自干醇酸体系 | |
| EFKA® FA 4600 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4600 is an antisettling agent for non-aqueous paints. As a modern anti-settling agent, it acts via adsorption phenomena on the pigment surface and effectively prevents pigments from settling and forming hard, difficult-to-stir sediments even in l...展开 EFKA® FA 4600 is an antisettling agent for non-aqueous paints. As a modern anti-settling agent, it acts via adsorption phenomena on the pigment surface and effectively prevents pigments from settling and forming hard, difficult-to-stir sediments even in low-viscosity coatings such as, e.g., dipping paints and wash-primers. This is possible even in the presence of specific high density pigments based on lead, chrome, barium, iron and titanium. In addition, the uniform electrostatic charge imparted by EFKA® FA 4600 prevents re-agglomeration thereby counteracting any premature settling of the pigments. EFKA® FA 4600 is an easy to use liquid anti-settling agent, the particular advantage of which is that it is effective over a broad range of polarity. It can, therefore, be used in a nitrocellulose lacquer, the solvents of which are mainly polar, as well as in decorative paints which only contain white spirit, i.e., a non-polar solvent. EFKA® FA 4600 is also an excellent anti-settling agent for low-viscosity printing inks, e.g., flexographic and gravure. In particular it counteracts the tendency of inorganic pigments to settle. 收起 | |
| EFKA® FA 4601 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4601 is an anti-settling agent for non-aqueous paint systems. It has been used with great success for years in the paint industry as a special agent for preventing sedimentation. EFKA® FA 4601 was developed as a result of detailed studies regardi...展开 EFKA® FA 4601 is an anti-settling agent for non-aqueous paint systems. It has been used with great success for years in the paint industry as a special agent for preventing sedimentation. EFKA® FA 4601 was developed as a result of detailed studies regarding interfacial activity. The mode of action of EFKA® FA 4601 systems results from the high surface activity of its constituents with almost all pigments. If processed properly, the individual pigment particles are coated with a monomolecular layer of adsorbed compounds which prevent agglomeration into larger particles, with the result that the fine particles remain in suspension and no caking occurs. This viscous liquid is a blend of selected fatty alcohol sulfates. EFKA® FA 4601 does not contain any alkali ions, and it is effective in most paints, provided they are not distinctly polar in their composition. 收起 | |
| Efka® FA 4610 | BASF Formulation Additives 巴斯夫配方助剂 | 阴离子型分散剂，特为钛白粉分散开发，也可用于其他的填料和无机颜料中，适用于汽车漆，工业漆，卷钢涂料和酸固化 | |
| Efka® FA 4612 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FA 4612 (以前的 Efka® 5210)可帮助润湿和分散填料（CaCO3和AI (OH) 3），含不饱和聚酯树脂或结合聚苯乙烯，聚醋酸乙烯和苯乙烯-丁二烯共聚物。它可使填料易于添加，减少分散时间。它也可降低和稳定浆体粘度，从而改善流平，增加填料含量，并提高防火性能。Efka® FA 4612设计用于含填料的SMC和BMC共混物。它也适合用于含填料的胶衣涂料 | |
| Efka® FA 4615 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FA 4615 (以前的Efka® 5215是一种有效地润湿和分散助剂，适用于无机填料。它可改善润湿性，使填料易于添加，降低浆体/混合物的粘度，增加填料含量。Efka® FA 4615适用于含填料的不饱和聚酯体系（SMC、BMC共混物、胶衣涂料和腻子）或结合聚苯乙烯、聚醋酸乙烯和苯乙烯-丁二烯共聚物。 | |
| EFKA® FA 4620 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4620 helps to wet and disperse solid particles (e.g. CaCO3, ATH) in unsaturated polyester resin systems. This results in improved wetting and incorporation of fillers and extenders, reduced viscosity of the paste/compound, and increased filler an...展开 EFKA® FA 4620 helps to wet and disperse solid particles (e.g. CaCO3, ATH) in unsaturated polyester resin systems. This results in improved wetting and incorporation of fillers and extenders, reduced viscosity of the paste/compound, and increased filler and extender loading. EFKA® FA 4620 is suited for filled unsaturated polyester systems (e.g. SMC/BMC, gel coats, car putties) or combinations with polystyrene, polyvinylacetate and styrene-butadiene copolymers (e.g. LS- or LP formulations). 收起 | |
| EFKA® FA 4642 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4642 is an additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This product is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not aff...展开 EFKA® FA 4642 is an additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This product is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not affected. In the dispersion of organically treated Bentonites, the use of EFKA® FA 4642 shortens dispersion time, provides easier handling of the Bentonite gel, and improves storage stability. 收起 | |
| EFKA® FA 4644 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4644 is a transparent, yellowish liquid additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This means reduced dispersion time, stabilization of the pigment dispersion, decreased pigm...展开 EFKA® FA 4644 is a transparent, yellowish liquid additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This means reduced dispersion time, stabilization of the pigment dispersion, decreased pigment sedimentation, and increased gloss and improved flow. EFKA® FA 4644 is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not affected. 收起 | |
| EFKA® FA 4654 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4654 helps to prevent interfacial tension between the hydrophilic pigments/extenders and binder, forming a lattice structure with the pigments at the same time. This means: reduced dispersion time, stabilization of the pigment dispersion, reduced...展开 EFKA® FA 4654 helps to prevent interfacial tension between the hydrophilic pigments/extenders and binder, forming a lattice structure with the pigments at the same time. This means: reduced dispersion time, stabilization of the pigment dispersion, reduced pigment sedimentation, reduced tendency to sag during application on vertical surfaces, and prevention of flooding. It is a high molecular weight carboxylic acid salts. EFKA® FA 4654 is ideal for dispersing organophilic bentonites, because it reduces dispersion time, improves the storage properties of the final paste and gives a thixotropic, easily processed paste product. It is especially suitable for non- to medium-polar binder systems, ie. air-dried alkyd resins, chlorinated polymers, alkyd/amino resin combinations and epoxies. EFKA® FA 4654 can cause discoloration in nitrocellulose varnishes. 收起 | |
| Efka® FA 4654 EM | BASF Formulation Additives 巴斯夫配方助剂 | 用于中性和非极性涂料的分散、防沉、防浮色和发花助剂，兼作有机膨润土的凝胶化助剂。 | |
| EFKA® FA 4663 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4663 is a dispersant and grinding aid, anti-settling and anti-floating agent for coatings, paints, printing inks, and other similar surface coatings. It is also a gelling aid for organically modified bentonite. This product is a 50% solution of a...展开 EFKA® FA 4663 is a dispersant and grinding aid, anti-settling and anti-floating agent for coatings, paints, printing inks, and other similar surface coatings. It is also a gelling aid for organically modified bentonite. This product is a 50% solution of an electroneutral salt of a polycarboxylic acid with amine derivatives dissolved in higher aromatics. EFKA® FA 4663 is an almost universally applicable additive for nonaqueous coatings. It has proved its value in particular in systems based on alkyd resins, alkyd/melamine resins, acrylic and epoxy resins,chlorinated rubber, linseed oil/stand oil, etc. If some linear binders which contain hydroxyl groups (e.g. Desmophen® types from Bayer)are used with our product, thixotropy can occur. 收起 | |
| EFKA® FA 4665 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4665 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binder. It is a high-molecular weight unsaturated carboxylic acid, combined with a very compatible organically modified polysiloxane. This transparent, s...展开 EFKA® FA 4665 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binder. It is a high-molecular weight unsaturated carboxylic acid, combined with a very compatible organically modified polysiloxane. This transparent, slightly brownish liquid is especially suitable for medium to high-polarity binder systems, for example: alkyd/amino resin combinations, nitro-cellulose systems, polyurethane- and chlorinated polymer systems, acrylic polyisocyanate systems (2-pack acrylics), and chlorinated polymers. EFKA® FA 4665 is not compatible with white spirit or paints which are diluted with white spirit. 收起 |
