| BT-B100 CMIT | BioTio Group | BT-B100 CMIT is a colorless to amber liquid that has a specific gravity of 1.26-1.32 and a pH value of 1.0-4.0. This product is most commonly used as a preservative in paints, resin emulsions, oil-water emulsions, and coating applications. | |
| BT-B100 MIT | BioTio Group | BT-B100 MIT is a greenish liquid that has a specific gravity of 1.10-1.20 and a pH value of 2.0-5.0. This product is most commonly used as a preservative in paints, resin emulsions, oil-water emulsions, and coating applications. | |
| BT-B101 BRONOPOL | BioTio Group | BT-B101 BRONOPOL is a white crystalline powder that has a melting point of 126-131°C and a pH value of 5.0-7.0. This product is most commonly used as a broad-spectrum antimicrobial agent in coatings, paints, inks, and adhesive applications. | |
| BT-B102 DBNPA | BioTio Group | BT-B102 DBNPA is a white crystalline powder that has a moisture content of ≤0.5% and a pH value of 4.0-6.0. This product is most commonly used as a biocide and preservative in paint applications. | |
| BT-B103 MIT | BioTio Group | BT-B103 MIT is a colorless to amber liquid that has a specific gravity of ≥1.10 and a pH value of 5.0-7.0. This product is most commonly used as a biocide and preservative in coatings, paints, resin emulsions, and oil-water emulsion applications. | |
| BT-B104 IPBC | BioTio Group | BT-B104 IPBC is a white crystalline powder that has a melting point of 65-68°C and a moisture content of ≤0.10%. This product is most commonly used as a highly effective fungicide in coatings and paint applications. | |
| BT-B105 BIT | BioTio Group | BT-B105 BIT is a white to light yellow powder that has a melting point of 155-158°C and a moisture content of ≤15%. This product is most commonly used as a biocide and preservative in coatings, paints, resin emulsions, and oil water emulsion applications. | |
| BT-B106 OIT | BioTio Group | BT-B106 OIT is an amber liquid that has a specific gravity of ≤1.1% and a moisture content of <0.5%. This product is most commonly used as a biocide and preservative in coatings, paints, resin emulsions, and oil water emulsion applications. | |
| BT-B107 DCOIT | BioTio Group | BT-B107 DCOIT is a white crystalline powder that has a melting point of 42.2-42.8°C and a moisture content of ≤0.10%. This product is most commonly used to provide broad-spectrum protection against degradation, discoloration and defacement caused by mold,...展开 BT-B107 DCOIT is a white crystalline powder that has a melting point of 42.2-42.8°C and a moisture content of ≤0.10%. This product is most commonly used to provide broad-spectrum protection against degradation, discoloration and defacement caused by mold, mildew and algae. It can be used in antifouling paint and other coatings. 收起 | |
| BT-B110 PCMC | BioTio Group | BT-B110 PCMC is a white to off-white crystalline powder that has a melting point of 114-116°C and a moisture content of <2.0%. This product is most commonly used as an antiseptic or antifungal agent in paint applications. | |
| BT-B112 ZPT | BioTio Group | BT-B112 ZPT is a white to off-white powder that has a pH value of 6.5-8.5 and a content/assay of ≥96%. This product is most commonly used as an antibacterial agent in coatings, paints, and adhesives. | |
| BT-B115 BBIT | BioTio Group | BT-B115 BBIT is a light pink, clear liquid that has a pH value of 6.5-8.0 and a density of 1.17 g/cm3. This product is most commonly used as a biocide and preservative in coatings, paints, resin emulsions, and oil water emulsion applications. | |
| BT-B117 DBDCB | BioTio Group | BT-B117 DBDCB is a white crystalline powder that has a melting point of 50.0-54.5°C and a content/assay of ≥99%. This product is most commonly used as a preservative in coatings. | |
| BT-IN603 DTSA | BioTio Group | BT-IN603 DTSA is an off-white to light yellow powder that has a melting point of 280-290°C and a moisture content of ≤0.10%. This product is most commonly used as a chemical intermediate in dyes and biocides. | |
| BT-IN604 DCPI | BioTio Group | BT-IN604 DCPI is a white crystalline powder that has a content/assay of ≥98% and other isocyanate content of ≤1.0%. This product is most commonly used as an intermediate for the production of dyes. | |
| CoatForce® CF10 | Lapinus Fibres BV | CoatForce® CF10 is a high quality engineered mineral fibre. Its fibre length results in an excellent dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF10 has an off-white colour and very low shot content. Th...展开 CoatForce® CF10 is a high quality engineered mineral fibre. Its fibre length results in an excellent dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF10 has an off-white colour and very low shot content. The off-white colour makes it especially suitable for decorative applications. CoatForce® exhibits excellent performance at elevated temperatures. It will not contribute to a fire but act as a blocking medium and reduce the spread of flame. It can be used at temperatures up to 700 ºC for CoatForce®. CoatForce® provides reinforcement and dimensional stability to a composite. Well-dispersed fibres form a reinforcing network in the paint layer, significantly enhancing resistance to cracking, impact, chipping and wear. 收起 | |
| CoatForce® CF30 | Lapinus Fibres BV | CoatForce® CF30 is a high quality engineered mineral fibre. Its fibre length results in an excellent dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF30 gives excellent mechanical properties to various pain...展开 CoatForce® CF30 is a high quality engineered mineral fibre. Its fibre length results in an excellent dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF30 gives excellent mechanical properties to various paint and coating systems. CoatForce® exhibits excellent performance at elevated temperatures. It will not contribute to a fire but act as a blocking medium and reduce the spread of flame. It can be used at temperatures up to 700 ºC for CoatForce®. CoatForce® provides reinforcement and dimensional stability to a composite. Well-dispersed fibres form a reinforcing network in the paint layer, significantly enhancing resistance to cracking, impact, chipping and wear. 收起 | |
| CoatForce® CF50 | Lapinus Fibres BV | CoatForce® CF50 is a high quality engineered mineral fibre. Its fibre length results in dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF50 gives mechanical properties and rheological behavior to various p...展开 CoatForce® CF50 is a high quality engineered mineral fibre. Its fibre length results in dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF50 gives mechanical properties and rheological behavior to various paint and coating systems. CoatForce® CF50 has an off-white colour and very low shot content. CoatForce® exhibits excellent performance at elevated temperatures. It will not contribute to a fire but act as a blocking medium and reduce the spread of flame. It can be used at temperatures up to 700 ºC for CoatForce®. CoatForce® provides reinforcement and dimensional stability to a composite. Well-dispersed fibres form a reinforcing network in the paint layer, significantly enhancing resistance to cracking, impact, chipping and wear. 收起 | |
| CoatForce® CF730 | Lapinus Fibres BV | CoatForce® CF730 is a mineral fibre with a very consistent fibre length and a relatively high but consistent content of non-fibrous material. CoatForce® CF730 shows added value in rheology control, reinforcement, dimensional stability, and heat resistance...展开 CoatForce® CF730 is a mineral fibre with a very consistent fibre length and a relatively high but consistent content of non-fibrous material. CoatForce® CF730 shows added value in rheology control, reinforcement, dimensional stability, and heat resistance. 收起 | |
| Easaqua™ L 600 | Vencorex | Easaqua™ L 600 is a low viscosity water dispersible aliphatic polyisocyanate. It exhibits several benefits, including optimal balance between low viscosity, high NCO content and emulsification ability; excellent humidity and moisture resistance, and impro...展开 Easaqua™ L 600 is a low viscosity water dispersible aliphatic polyisocyanate. It exhibits several benefits, including optimal balance between low viscosity, high NCO content and emulsification ability; excellent humidity and moisture resistance, and improved adhesion onto a wide range of substrates. This product is a hardener for high performance, light fastening, two-pack waterborne polyurethane coatings. It is recommended for plastic coatings, metal coatings, flooring coatings, and adhesives. 收起 | |
| Easaqua™ M 501 | Vencorex | Easaqua™ M 501 is a water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, and shows a lower viscosity and hydrophilicity compared to Easaqua™ M 502. It is used as a hardener of two-pack waterborne high performance po...展开 Easaqua™ M 501 is a water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, and shows a lower viscosity and hydrophilicity compared to Easaqua™ M 502. It is used as a hardener of two-pack waterborne high performance polyurethane coatings on various substrates, like wood, metal and plastics. This product can also be used as a solvent-free hardener of ultra-low VOC mat clearcoats or semigloss pigmented paints. 收起 | |
| Easaqua™ M 502 | Vencorex | Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane co...展开 Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane coatings on various substrates, like metal, plastics, wood, and concrete. Easaqua™ M 502 is also suggested as a crosslinker of paint and varnish formulations with very low VOC. 收起 | |
| Easaqua™ WAT-3 | Vencorex | Easaqua™ WAT-3 is a water dispersible crosslinker based on aliphatic polyisocyanate (HDI homopolymer). It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WAT-1. This product is suggested as a hardener of two-pack waterb...展开 Easaqua™ WAT-3 is a water dispersible crosslinker based on aliphatic polyisocyanate (HDI homopolymer). It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WAT-1. This product is suggested as a hardener of two-pack waterborne polyurethane leather finishing topcoats for automotive, upholstery and accessory leather products as well as 3D lamination applications in the automotive and furniture industries. Easaqua™ WAT-3 is also used as a crosslinker of waterborne adhesives for shows and wood to obtain D4 classification according to EN 204. 收起 | |
| Easaqua™ WAT-4 | Vencorex | Easaqua™ WAT-4是一种以脂质聚异氰酸酯（HDI均聚物）为基础的在水中可分散的交联剂。它不包含任何烷基酚乙氧基化物。它是Easaqua™ WAT的不含APEO版本。这款产品用作在鞋和木头上使用的水基粘合剂的交联剂，根据EN204获得D4分类。它还推荐用作双组分水性聚氨酯皮革涂饰面漆的固化剂，用于汽车、家居装饰用品，配套皮革用品以及3D层压应用等汽车和家具行业。 | |
| Easaqua™ X D 401 | Vencorex | Easaqua™ X D 401 is a fast drying water-dispersible aliphatic polyisocyanate, supplied in n-butyl acetate. It does not contain any alkyl phenol ethoxylate. This product is suggested as a fast drying hardener of two-pack waterborne high-performance polyure...展开 Easaqua™ X D 401 is a fast drying water-dispersible aliphatic polyisocyanate, supplied in n-butyl acetate. It does not contain any alkyl phenol ethoxylate. This product is suggested as a fast drying hardener of two-pack waterborne high-performance polyurethane coatings on various substrates, like wood, metal, and plastics. 收起 | |
| Easaqua™ X D 803 | Vencorex | Easaqua™ X D 803 is a fast drying ready-to-use water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, has a low odour, and is not labelled as flammable. This product is suggested for use as a fast drying hardener of t...展开 Easaqua™ X D 803 is a fast drying ready-to-use water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, has a low odour, and is not labelled as flammable. This product is suggested for use as a fast drying hardener of two-pack waterborne high performance polyurethane coatings on various substrates, like wood, metal, and plastics. 收起 | |
| Easaqua™ X D 870 | Vencorex | Easaqua™ X D 870 is a ready to use product, easily dispersed in aqueous formulation. This product is ideal for onsite application : Parquet repair and concrete flooring an also recommended for a variety of industrial applications; wood and metal coatings....展开 Easaqua™ X D 870 is a ready to use product, easily dispersed in aqueous formulation. This product is ideal for onsite application : Parquet repair and concrete flooring an also recommended for a variety of industrial applications; wood and metal coatings. Easaqua™ X D 870 is a unique combination of Easaqua™ Technology and HDI/IPDI derivatives suitable to comply with European VOC emissions regulations. 收起 | |
| Enamel Grade Titanium Dioxide HTD-E | Hoten Chemical International Group | Enamel Grade Titanium Dioxide HTD-E is a white powder made from a sulfuric acid process. This product has a strong opacity making a thin, smooth and acid resistant coating used in enamel and coloring material. | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| Hexamethylene Diisocyanate (HDI) | Vencorex | Hexamethylene Diisocyanate (HDI) is also known as monomeric aliphatic diisocyanate. It is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing exceptional weathering...展开 Hexamethylene Diisocyanate (HDI) is also known as monomeric aliphatic diisocyanate. It is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing exceptional weathering resistance and flexibility. 收起 | |
| HTM-A Barium Sulphate Modified | Hoten Chemical International Group | HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTM-B Barium Sulphate Modified | Hoten Chemical International Group | HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure v...展开 HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTM-C Barium Sulphate Modified | Hoten Chemical International Group | HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTN-NO Barium Sulfate Natural | Hoten Chemical International Group | HTN-NO Barium Sulfate Natural is a natural function filler that can be used in paint and improve concentration of coatings. | |
| HTN-NP Barium Sulfate Natural | Hoten Chemical International Group | HTN-NP Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NQ Barium Sulfate Natural | Hoten Chemical International Group | HTN-NQ Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NR Barium Sulfate Natural | Hoten Chemical International Group | HTN-NR Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NS Barium Sulfate Natural | Hoten Chemical International Group | HTN-NS Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTS-H Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow dist...展开 HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| HTS-L Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| HTS-M Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| Isophorone Diisocyanate (IPDI) | Vencorex | Isophorone Diisocyanate (IPDI) is also known as monomeric cycloaliphatic diisocyanate. It is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing exceptional weather...展开 Isophorone Diisocyanate (IPDI) is also known as monomeric cycloaliphatic diisocyanate. It is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing exceptional weathering resistance. 收起 | |
| Leafing Aluminum Paste BT-AP400 | BioTio Group | Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP401 | BioTio Group | Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP402 | BioTio Group | Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP403 | BioTio Group | Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP404 | BioTio Group | Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| LITHOPONE BT-IN600 | BioTio Group | LITHOPONE BT-IN600 is a white powder with a zinc sulfide content of ≥28% and a pH value of 7.2. This product is most commonly used in printing inks, marking paints, and coating applications. | |
| Non-Leafing Aluminum Paste BT-AP110 | BioTio Group | Non-Leafing Aluminum Paste BT-AP110 is a high pure aluminum powder that has a pigment content of 60±2% and an average particle size of 15μm. This product is most commonly used in marine paints, decorative and aerosol finishes, and coil coatings. | |
| Non-Leafing Aluminum Paste BT-AP120 | BioTio Group | Non-Leafing Aluminum Paste BT-AP120 is a high pure aluminum powder that has a pigment content of 60±2% and an average particle size of 15μm. This product is most commonly used in marine paints, decorative and aerosol finishes, and coil coatings. | |
| Non-Leafing Aluminum Paste BT-AP130 | BioTio Group | Non-Leafing Aluminum Paste BT-AP130 is a high pure aluminum powder that has a pigment content of 62±2% and an average particle size of 16μm. This product is most commonly used in marine paints, decorative and aerosol finishes, and coil coatings. | |
| Non-Leafing Aluminum Paste BT-AP140 | BioTio Group | Non-Leafing Aluminum Paste BT-AP140 is a high pure aluminum powder that has a pigment content of 62±2% and an average particle size of 7μm. This product is most commonly used in marine paints, decorative and aerosol finishes, and coil coatings. | |
| Precipitated Barium Sulfate BT-IN601 | BioTio Group | Precipitated Barium Sulfate BT-IN601 is a white powder with a barium sulfate content of 98% and a maximum whiteness of 93. This product is most commonly used as a filler in printing ink, paint, surface coating, coated art paper, and dye applications. | |
| Rockforce® MS600-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS600-Roxul®1000 is a high quality engineered mineral fibre. Its short fibre length results in an excellent dispersion in various matrix materials e.g. resins, bitumen. Rockforce® MS600-Roxul®1000 shows added values in rheology control, reinfor...展开 Rockforce® MS600-Roxul®1000 is a high quality engineered mineral fibre. Its short fibre length results in an excellent dispersion in various matrix materials e.g. resins, bitumen. Rockforce® MS600-Roxul®1000 shows added values in rheology control, reinforcement, dimensional stability, and heat resistance. 收起 | |
| Rockforce® MS603-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS603-Roxul®1000 is a high quality engineered mineral fibre. Its short fibre length results in an excellent dispersion in various matrix materials e.g. resins, bitumen. Rockforce® MS603-Roxul®1000 shows added values in rheology control, reinfor...展开 Rockforce® MS603-Roxul®1000 is a high quality engineered mineral fibre. Its short fibre length results in an excellent dispersion in various matrix materials e.g. resins, bitumen. Rockforce® MS603-Roxul®1000 shows added values in rheology control, reinforcement, dimensional stability, and heat resistance. 收起 | |
| Rockforce® MS605-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS605-Roxul®1000 is a high quality engineered mineral fibre. The relative long fibre is developed for use in wet mixing processes. Rockforce® MS605-Roxul®1000 is consistent in quality in terms of rheology control, reinforcement, dimensional sta...展开 Rockforce® MS605-Roxul®1000 is a high quality engineered mineral fibre. The relative long fibre is developed for use in wet mixing processes. Rockforce® MS605-Roxul®1000 is consistent in quality in terms of rheology control, reinforcement, dimensional stability, and heat resistance. 收起 | |
| Rockforce® MS610-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS610-Roxul®1000 is a highly cleaned mineral fibre. Its amino-silane surface treatment gives it an optimum bond in phenol, epoxy and resins alike, resulting in better reinforcement properties. Rockforce® MS610-Roxul®1000 shows added values in r...展开 Rockforce® MS610-Roxul®1000 is a highly cleaned mineral fibre. Its amino-silane surface treatment gives it an optimum bond in phenol, epoxy and resins alike, resulting in better reinforcement properties. Rockforce® MS610-Roxul®1000 shows added values in rheology control, dimensional stability, reinforcement, heat resistance, and chemical bonding with phenol and epoxy resins 收起 | |
| Rockforce® MS640-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS640-Roxul®1000 is a premium quality mineral fibre. Its surface modification gives optimum processing conditions and compatibility/reactivity with sulphur cured rubbers resulting in higher strength properties, better dimension stability and im...展开 Rockforce® MS640-Roxul®1000 is a premium quality mineral fibre. Its surface modification gives optimum processing conditions and compatibility/reactivity with sulphur cured rubbers resulting in higher strength properties, better dimension stability and improved thermal resistance of the product. Rockforce® MS640-Roxul®1000 reduces the speed of deterioration of the rubber matrix, since engineered mineral fibres are not susceptible to ageing under the applied conditions. 收起 | |
| Rockforce® MS675-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS675-Roxul®1000 is a premium quality engineered mineral fibre. It is a medium length fibre with extreme low shot content, surface treated with a surfactant for excellent dispersion in bitumen / asphalt. Rockforce® MS675-Roxul®1000 can be used ...展开 Rockforce® MS675-Roxul®1000 is a premium quality engineered mineral fibre. It is a medium length fibre with extreme low shot content, surface treated with a surfactant for excellent dispersion in bitumen / asphalt. Rockforce® MS675-Roxul®1000 can be used in a number of coating applications. It is especially suitable for replacing asbestos and cellulose fibres in bituminous roof coatings and water proofing coatings. Rockforce® MS675-Roxul®1000 is easy to use no major increase of viscosity during production, excellent viscosity building characteristics and controlled rheology, levelling and sag resistance. 收起 | |
| Rockforce® MS730-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS730-Roxul®1000 is a mineral fibre with a very consistent fibre length and a relatively high but consistent content of non-fibrous material, which is applied in refractory products and bitumen / asphalt. Rockforce® MS730-Roxul®1000 shows added...展开 Rockforce® MS730-Roxul®1000 is a mineral fibre with a very consistent fibre length and a relatively high but consistent content of non-fibrous material, which is applied in refractory products and bitumen / asphalt. Rockforce® MS730-Roxul®1000 shows added values in rheology control, reinforcement, dimensional stability, and heat resistance. 收起 | |
| Rockforce® MS750-Roxul®1000 | Lapinus Fibres BV | Rockforce® MS750-Roxul®1000 is a quality engineered mineral fibre. Its short fibre length results in excellent dispersion properties during dry mixing, even when used in high fibre loads. Rockforce® MS750-Roxul®1000 is consistent in quality in terms of ch...展开 Rockforce® MS750-Roxul®1000 is a quality engineered mineral fibre. Its short fibre length results in excellent dispersion properties during dry mixing, even when used in high fibre loads. Rockforce® MS750-Roxul®1000 is consistent in quality in terms of chemical composition, shot content, and fibre length. 收起 | |
| Rockforce® RF840-Roxul®1000 | Lapinus Fibres BV | Rockforce® RF840-Roxul®1000 is a premium quality engineered mineral fibre with a dual coating system that gives excellent interaction with phenol resins. Its surface treatment is a combination of amino silane and a cationic surfactant resulting in a signi...展开 Rockforce® RF840-Roxul®1000 is a premium quality engineered mineral fibre with a dual coating system that gives excellent interaction with phenol resins. Its surface treatment is a combination of amino silane and a cationic surfactant resulting in a significant better flexible strength and higher compression strength. Rockforce® RF840-Roxul®1000 is consistent in terms of chemical composition, surface treatment, purity, and fibre length. 收起 | |
| Sodium Alginate BT-IN607 | BioTio Group | Sodium Alginate BT-IN607 is a 40-mesh sized, light yellow powder that has a pH value of 6.0-7.0. This product is most commonly used as a thickener in reactive dyestuff, textile screen-printing, and carpet jet-printing applications. | |
| Titanium Dioxide Anatase | Hoten Chemical International Group | Titanium Dioxide Anatase is a white powder derived from titanium concentrates and sulfuric acid. This anatase titanium dioxide pigment can provide whiteness, gloss, and high intensity in paints, coatings, and printing inks. | |
| Titanium Dioxide Anatase BT-A10 | BioTio Group | Titanium Dioxide Anatase BT-A10 is a white powder that has a titanium dioxide content of ≤93% and a pH value of 6.5-8.0. This product is most commonly used in road marking and exterior paint applications. | |
| Titanium Dioxide Anatase BT-A101 | BioTio Group | Titanium Dioxide Anatase BT-A101 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in road marking and exterior paint applications. | |
| Titanium Dioxide Anatase BT-A102 | BioTio Group | Titanium Dioxide Anatase BT-A102 is a white powder that has a titanium dioxide content of ≥98% and a pH value of 6.5-8.0. This product is most commonly used in road marking and exterior paint applications. | |
| Titanium Dioxide Anatase BT-A11 | BioTio Group | Titanium Dioxide Anatase BT-A11 is a white powder that has a titanium dioxide content of ≤93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A113 | BioTio Group | Titanium Dioxide Anatase BT-A113 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A114 | BioTio Group | Titanium Dioxide Anatase BT-A114 is a white powder that has a titanium dioxide content of ≥98% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A12 | BioTio Group | Titanium Dioxide Anatase BT-A12 is a white powder that has a titanium dioxide content of ≤93% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Anatase BT-A125 | BioTio Group | Titanium Dioxide Anatase BT-A125 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Anatase BT-A126 | BioTio Group | Titanium Dioxide Anatase BT-A126 is a white powder that has a titanium dioxide content of ≥98% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Rutile BT-R20 | BioTio Group | Titanium Dioxide Rutile BT-R20 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Rutile BT-R201 | BioTio Group | Titanium Dioxide Rutile BT-R201 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Rutile BT-R202 | BioTio Group | Titanium Dioxide Rutile BT-R202 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Rutile BT-R21 | BioTio Group | Titanium Dioxide Rutile BT-R21 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior paints and traffic marking applications. | |
| Titanium Dioxide Rutile BT-R213 | BioTio Group | Titanium Dioxide Rutile BT-R213 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior paints and traffic marking applications. | |
| Titanium Dioxide Rutile BT-R214 | BioTio Group | Titanium Dioxide Rutile BT-R214 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior paints and traffic marking applications. | |
| Titanium Dioxide Rutile BT-R22 | BioTio Group | Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink appl...展开 Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R225 | BioTio Group | Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展开 Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R226 | BioTio Group | Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展开 Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile for Paint Industry HTD-R100 | Hoten Chemical International Group | Titanium Dioxide Rutile for Paint Industry HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting ...展开 Titanium Dioxide Rutile for Paint Industry HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durability and dispersion properties to coating, paint, and printing inks. 收起 | |
| Titanium Dioxide Rutile HTD-R100 | Hoten Chemical International Group | Titanium Dioxide Rutile HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durabilit...展开 Titanium Dioxide Rutile HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durability and dispersion properties to coating, paint, and printing ink. 收起 | |
| Tolonate™ D2 | Vencorex | Tolonate™ D2 is a blocked aliphatic polyisocyanate (HDI homopolymer), supplied at 75% solids in aromatic solvent. It is typically used as a crosslinker of hydroxylated polymers, notably polyesters and polyacrylates, to prepare heat activated one-component...展开 Tolonate™ D2 is a blocked aliphatic polyisocyanate (HDI homopolymer), supplied at 75% solids in aromatic solvent. It is typically used as a crosslinker of hydroxylated polymers, notably polyesters and polyacrylates, to prepare heat activated one-component polyurethane systems for weatherable coatings. It gives excellent mechanical properties in conjunction with outstanding resistance to solvents, abrasion and chemical products. This product is commonly used in Automotive OEM formulations, can and coil coatings and other general industrial coatings on metal. 收起 |
