| C-2090 | Qingdao Xinyutian Chemical Co., Ltd. | C-2090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, cold weather resistance, hydrolysis resistance, transparency and mechanical properties commonly used in oil seal materials. | |
| C-2390 | Qingdao Xinyutian Chemical Co., Ltd. | C-2390 is a prepolymer with a 80 Shore A hardness. This product has strong weatherability, high temperature resistance, hydrolysis resistance and mechanical properties commonly used in oil seal materials. | |
| C-3090 | Qingdao Xinyutian Chemical Co., Ltd. | C-3090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| C-6090 | Qingdao Xinyutian Chemical Co., Ltd. | C-6090 is a prepolymer with a 90-95 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| Easaqua™ L 600 | Vencorex | Easaqua™ L 600 is a low viscosity water dispersible aliphatic polyisocyanate. It exhibits several benefits, including optimal balance between low viscosity, high NCO content and emulsification ability; excellent humidity and moisture resistance, and impro...展开 Easaqua™ L 600 is a low viscosity water dispersible aliphatic polyisocyanate. It exhibits several benefits, including optimal balance between low viscosity, high NCO content and emulsification ability; excellent humidity and moisture resistance, and improved adhesion onto a wide range of substrates. This product is a hardener for high performance, light fastening, two-pack waterborne polyurethane coatings. It is recommended for plastic coatings, metal coatings, flooring coatings, and adhesives. 收起 | |
| Easaqua™ M 501 | Vencorex | Easaqua™ M 501 is a water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, and shows a lower viscosity and hydrophilicity compared to Easaqua™ M 502. It is used as a hardener of two-pack waterborne high performance po...展开 Easaqua™ M 501 is a water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, and shows a lower viscosity and hydrophilicity compared to Easaqua™ M 502. It is used as a hardener of two-pack waterborne high performance polyurethane coatings on various substrates, like wood, metal and plastics. This product can also be used as a solvent-free hardener of ultra-low VOC mat clearcoats or semigloss pigmented paints. 收起 | |
| Easaqua™ M 502 | Vencorex | Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane co...展开 Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane coatings on various substrates, like metal, plastics, wood, and concrete. Easaqua™ M 502 is also suggested as a crosslinker of paint and varnish formulations with very low VOC. 收起 | |
| Easaqua™ WAT-3 | Vencorex | Easaqua™ WAT-3 is a water dispersible crosslinker based on aliphatic polyisocyanate (HDI homopolymer). It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WAT-1. This product is suggested as a hardener of two-pack waterb...展开 Easaqua™ WAT-3 is a water dispersible crosslinker based on aliphatic polyisocyanate (HDI homopolymer). It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WAT-1. This product is suggested as a hardener of two-pack waterborne polyurethane leather finishing topcoats for automotive, upholstery and accessory leather products as well as 3D lamination applications in the automotive and furniture industries. Easaqua™ WAT-3 is also used as a crosslinker of waterborne adhesives for shows and wood to obtain D4 classification according to EN 204. 收起 | |
| Easaqua™ WAT-4 | Vencorex | Easaqua™ WAT-4是一种以脂质聚异氰酸酯（HDI均聚物）为基础的在水中可分散的交联剂。它不包含任何烷基酚乙氧基化物。它是Easaqua™ WAT的不含APEO版本。这款产品用作在鞋和木头上使用的水基粘合剂的交联剂，根据EN204获得D4分类。它还推荐用作双组分水性聚氨酯皮革涂饰面漆的固化剂，用于汽车、家居装饰用品，配套皮革用品以及3D层压应用等汽车和家具行业。 | |
| Easaqua™ X D 401 | Vencorex | Easaqua™ X D 401 is a fast drying water-dispersible aliphatic polyisocyanate, supplied in n-butyl acetate. It does not contain any alkyl phenol ethoxylate. This product is suggested as a fast drying hardener of two-pack waterborne high-performance polyure...展开 Easaqua™ X D 401 is a fast drying water-dispersible aliphatic polyisocyanate, supplied in n-butyl acetate. It does not contain any alkyl phenol ethoxylate. This product is suggested as a fast drying hardener of two-pack waterborne high-performance polyurethane coatings on various substrates, like wood, metal, and plastics. 收起 | |
| Easaqua™ X D 803 | Vencorex | Easaqua™ X D 803 is a fast drying ready-to-use water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, has a low odour, and is not labelled as flammable. This product is suggested for use as a fast drying hardener of t...展开 Easaqua™ X D 803 is a fast drying ready-to-use water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, has a low odour, and is not labelled as flammable. This product is suggested for use as a fast drying hardener of two-pack waterborne high performance polyurethane coatings on various substrates, like wood, metal, and plastics. 收起 | |
| Easaqua™ X D 870 | Vencorex | Easaqua™ X D 870 is a ready to use product, easily dispersed in aqueous formulation. This product is ideal for onsite application : Parquet repair and concrete flooring an also recommended for a variety of industrial applications; wood and metal coatings....展开 Easaqua™ X D 870 is a ready to use product, easily dispersed in aqueous formulation. This product is ideal for onsite application : Parquet repair and concrete flooring an also recommended for a variety of industrial applications; wood and metal coatings. Easaqua™ X D 870 is a unique combination of Easaqua™ Technology and HDI/IPDI derivatives suitable to comply with European VOC emissions regulations. 收起 | |
| Enamel Grade Titanium Dioxide HTD-E | Hoten Chemical International Group | Enamel Grade Titanium Dioxide HTD-E is a white powder made from a sulfuric acid process. This product has a strong opacity making a thin, smooth and acid resistant coating used in enamel and coloring material. | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| HA-V204 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance...展开 HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance, high adhesion strength, high fogging and it protects against other environmental hazards. 收起 | |
| HA-V209 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temeratu...展开 HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temerature resistance. HA-V209 provides strong physical properties such as a high adhesion strength, high fogging and it protects against other environmental hazards. 收起 | |
| HA-V220 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperat...展开 HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperature tolerance, high adhesion strength and protects against other environmental hazards. 收起 | |
| HAV-216 | Qingdao Xinyutian Chemical Co., Ltd. | HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with goo...展开 HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起 | |
| HAV-228 | Qingdao Xinyutian Chemical Co., Ltd. | HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, hig...展开 HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起 | |
| Hexamethylene Diisocyanate (HDI) | Vencorex | Hexamethylene Diisocyanate (HDI) is also known as monomeric aliphatic diisocyanate. It is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing exceptional weathering...展开 Hexamethylene Diisocyanate (HDI) is also known as monomeric aliphatic diisocyanate. It is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing exceptional weathering resistance and flexibility. 收起 | |
| HTM-A Barium Sulphate Modified | Hoten Chemical International Group | HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTM-B Barium Sulphate Modified | Hoten Chemical International Group | HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure v...展开 HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTM-C Barium Sulphate Modified | Hoten Chemical International Group | HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTN-NO Barium Sulfate Natural | Hoten Chemical International Group | HTN-NO Barium Sulfate Natural is a natural function filler that can be used in paint and improve concentration of coatings. | |
| HTN-NP Barium Sulfate Natural | Hoten Chemical International Group | HTN-NP Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NQ Barium Sulfate Natural | Hoten Chemical International Group | HTN-NQ Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NR Barium Sulfate Natural | Hoten Chemical International Group | HTN-NR Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NS Barium Sulfate Natural | Hoten Chemical International Group | HTN-NS Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTS-H Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow dist...展开 HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| HTS-L Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| HTS-M Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| Isophorone Diisocyanate (IPDI) | Vencorex | Isophorone Diisocyanate (IPDI) is also known as monomeric cycloaliphatic diisocyanate. It is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing exceptional weather...展开 Isophorone Diisocyanate (IPDI) is also known as monomeric cycloaliphatic diisocyanate. It is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing exceptional weathering resistance. 收起 | |
| POL-1125 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1125 is a polyol compound from the DEG Series and it has a Molecular Weight of 900 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives...展开 POL-1125 is a polyol compound from the DEG Series and it has a Molecular Weight of 900 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearing and abrasion, while also increasing folding endurance. 收起 | |
| POL-1180 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1180 is a polyol compound from the DEG Series and it has a Molecular Weight of 600 which can be adjusted if required. This product can be used in adhesives, shoe soles, artificial leather resins and elastomers to increase resistance to abrasion and te...展开 POL-1180 is a polyol compound from the DEG Series and it has a Molecular Weight of 600 which can be adjusted if required. This product can be used in adhesives, shoe soles, artificial leather resins and elastomers to increase resistance to abrasion and tearing. It takes a liquid form at room temperature but will solidify at lower temperatures. 收起 | |
| POL-123 | Qingdao Xinyutian Chemical Co., Ltd. | POL-123 is a polyol from the Other Compound Series that is widely used in artificial leather resins, shoe soles, adhesives, elastomers and coatings. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. Th...展开 POL-123 is a polyol from the Other Compound Series that is widely used in artificial leather resins, shoe soles, adhesives, elastomers and coatings. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This particular grade has a Molecular Weight of 3500 but that can be adjusted to meet the needs of the customer. These compounds help products become abrasion resistant, maintain good folding endurance and tearing resistance. 收起 | |
| POL-1232 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1232 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1232 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 3500 and a Hydroxyl Value of 31-33 mgKOH/g. 收起 | |
| POL-1234 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1234 is a polyol from the High Functionality Series that is specially designed to be used in coatings, adhesives and elastomers. This series of products has a functionality of 2.2-2.6 which can be adjusted to the customers requirements. It provides ot...展开 POL-1234 is a polyol from the High Functionality Series that is specially designed to be used in coatings, adhesives and elastomers. This series of products has a functionality of 2.2-2.6 which can be adjusted to the customers requirements. It provides other good physical qualities with a Molecular Weight of 1500 and a Hydroxyl Value of 72-78 mgKOH/g. 收起 | |
| POL-1238 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1238 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1238 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This compound has a Viscosity of 1800 cps @ 60°C and a Molecular Weight of 3000. 收起 | |
| POL-1262 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1262 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1262 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 1800 and a Viscosity of 900 cps @ 60°C. 收起 | |
| POL-1266 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1266 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1266 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 1700 and a Viscosity of 1150 cps @ 60°C. 收起 | |
| POL-1276 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1276 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1276 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 1500 and a Viscosity of 750 cps @ 60°C. 收起 | |
| POL-138 | Qingdao Xinyutian Chemical Co., Ltd. | POL-138 is a polyol compound from the DEG Series that is in liquid form at room temperatures and solidifies at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearin...展开 POL-138 is a polyol compound from the DEG Series that is in liquid form at room temperatures and solidifies at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearing and abrasion, while also increasing folding endurance. It has a Hydroxyl Value of 35-41 mgKOH/g and a Molecular Weight of 3000 which can be adjusted to meet the needs of the customer. 收起 | |
| POL-156 | Qingdao Xinyutian Chemical Co., Ltd. | POL-156 is a polyol compound from the DEG Series and it has a Molecular Weight of 2000 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives...展开 POL-156 is a polyol compound from the DEG Series and it has a Molecular Weight of 2000 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearing and abrasion, while also increasing folding endurance. 收起 | |
| POL-1756 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1756 is a polyol from the Other Compound Series that is widely used in adhesives, coatings, artificial leathers, shoe soles and elastomers. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This pa...展开 POL-1756 is a polyol from the Other Compound Series that is widely used in adhesives, coatings, artificial leathers, shoe soles and elastomers. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This particular grade has a Molecular Weight of 2000 but that can be adjusted to meet the needs of the customer. These compounds provide the products the ability to be abrasion resistance, tear resistant, and have good folding-endurance. 收起 | |
| POL-1856 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1856 is a polyol from the Phthalic Anhydride and Other Aromatic Diacid Series, and it is specially developed for use in coatings, adhesives and rigid foams. This product is solid at room temperature and has a molecular weight of 2000. It has other goo...展开 POL-1856 is a polyol from the Phthalic Anhydride and Other Aromatic Diacid Series, and it is specially developed for use in coatings, adhesives and rigid foams. This product is solid at room temperature and has a molecular weight of 2000. It has other good physical properties with a Water Value that is <0.03% and a Hydroxyl Value of 50-60 mgKOH/g. 收起 | |
| POL-2016 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2016 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-2016 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This compound has a Hydroxyl Value of 51-59 mgKOH/g and a Molecular Weight of 2000. 收起 | |
| POL-2112 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2112 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. The Molecular Weight of this product is 1000 but can be adjusted based on the requirements of the custome...展开 POL-2112 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. The Molecular Weight of this product is 1000 but can be adjusted based on the requirements of the customer. It is mainly utilized in adhesives, elastomers, artificial leather resins and shoe soles. It will increase resistance to abrasion and tearing, while also increasing folding endurance and mechanical strength. 收起 | |
| POL-23112 | Qingdao Xinyutian Chemical Co., Ltd. | POL-23112 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and Thermoplastic Polyurethanes (TPU). It will provide the finished product with the ability to protect itself against abra...展开 POL-23112 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and Thermoplastic Polyurethanes (TPU). It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This grade hasa a Molecular Weight of 1000 and a Viscosity of 500cps @ 60°C. 收起 | |
| POL-2322 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2322 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2322 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This particular grade has a Viscosity of 3000 cps @ 60°C and a Molecular Weight of 5000. 收起 | |
| POL-2325 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2325 is a polyol from the High Functionality Series that is specially designed to be used in coatings, adhesives and elastomers. This series of products has a functionality of 2.2-2.6 which can be adjusted to the customers requirements. It provides ot...展开 POL-2325 is a polyol from the High Functionality Series that is specially designed to be used in coatings, adhesives and elastomers. This series of products has a functionality of 2.2-2.6 which can be adjusted to the customers requirements. It provides other good physical qualities with a Molecular Weight of 1900 and an Acid Value that is 0.2-0.6 mgKOH/g. 收起 | |
| POL-2328 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2328 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2328 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This particular grade has a Molecular Weight of 4000 and a Hydroxyl Value of 25-31 mgKOH/g. 收起 | |
| POL-2338 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2338 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2338 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This particular grade has a Molecular Weight of 3000 and a Hydroxyl Value of 35-41 mgKOH/g. 收起 | |
| POL-2345 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2345 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2345 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This particular grade has a Molecular Weight of 2500 and a Hydroxyl Value of 42-48 mgKOH/g. 收起 | |
| POL-2356 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2356 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2356 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This grade has a Hydroxyl Value of 53-59 mgKOH/g and a Molecular Weight of 2000 which can be adjusted as needed. 收起 | |
| POL-2365 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2365 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2365 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This grade has a Hydroxyl Value of 63-67 mgKOH/g and a Molecular Weight of 1700 which can be adjusted as needed. 收起 | |
| POL-2375 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2375 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2375 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This grade has a a Molecular Weight of 1500 and a Viscosity of 1000cps @ 60°C. 收起 | |
| POL-238 | Qingdao Xinyutian Chemical Co., Ltd. | POL-238 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. It is mainly utilized in artificial leather resins, shoe soles, adhesives and elastomers. It will increase...展开 POL-238 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. It is mainly utilized in artificial leather resins, shoe soles, adhesives and elastomers. It will increase resistance to abrasion and tearing, while also increasing folding endurance and mechanical strength. The Molecular Weight of this product is 3000 but can be adjusted based on the requirements of the customer. 收起 | |
| POL-2428 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2428 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products pro...展开 POL-2428 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products provide a good resistance to tearing, abrasion, and also increases folding endurance. This compound has a Hydroxyl Value of 26-30 mgKOH/g and a Molecular Weight of 4000. 收起 | |
| POL-2456 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2456 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products pro...展开 POL-2456 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products provide a good resistance to tearing, abrasion, and also increases folding endurance. This compound has a Molecular Weight of 2000 and a Viscosity of 1500 cps @ 60°C. 收起 | |
| POL-2466 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2466 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products pro...展开 POL-2466 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products provide a good resistance to tearing, abrasion, and also increases folding endurance. This compound has a Molecular Weight of 1700 and a Viscosity of 2000 cps @ 60°C. 收起 | |
| POL-2476 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2476 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products pro...展开 POL-2476 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products provide a good resistance to tearing, abrasion, and also increases folding endurance. This compound has a Molecular Weight of 1500 and a Hydroxyl Value of 71-79 mgKOH/g. 收起 | |
| POL-2500 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2500 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products pro...展开 POL-2500 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products provide a good resistance to tearing, abrasion, and also increases folding endurance. This compound has a Hydroxyl Value of 53-59 mgKOH/g and a Molecular Weight of 2000. 收起 | |
| POL-256 | Qingdao Xinyutian Chemical Co., Ltd. | POL-256 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. It is mainly utilized in elastomers, adhesives, shoe soles and artificial leather resins. It will increase...展开 POL-256 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. It is mainly utilized in elastomers, adhesives, shoe soles and artificial leather resins. It will increase resistance to abrasion and tearing, while also increasing folding endurance and mechanical strength. The Molecular Weight of this product is 2000 but can be adjusted based on the requirements of the customer. 收起 | |
| POL-25722 | Qingdao Xinyutian Chemical Co., Ltd. | POL-25722 is a polyol from the Other Compound Series that is widely used in artificial leather resins, shoe soles, adhesives, elastomers and coatings. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. ...展开 POL-25722 is a polyol from the Other Compound Series that is widely used in artificial leather resins, shoe soles, adhesives, elastomers and coatings. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This particular grade has a Molecular Weight of 5000 but that can be adjusted to meet the needs of the customer. These compounds help products become abrasion resistant, maintain good folding endurance and tearing resistance. 收起 | |
| POL-265 | Qingdao Xinyutian Chemical Co., Ltd. | POL-265 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. The Molecular Weight of this product is 1700 but can be adjusted based on the requirements of the customer...展开 POL-265 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. The Molecular Weight of this product is 1700 but can be adjusted based on the requirements of the customer. It is mainly utilized in elastomers, adhesives, shoe soles and artificial leather resins. It will increase resistance to abrasion and tearing, while also increasing folding endurance and mechanical strength. 收起 | |
| POL-311 | Qingdao Xinyutian Chemical Co., Ltd. | POL-311 is a polyol that is part of the Ultrahigh Molecular Weight Series and it is specially developed for adhesives. This product can be used for laminating packaging directly and it has Molecular Weight of 10000. It provides other good physical propert...展开 POL-311 is a polyol that is part of the Ultrahigh Molecular Weight Series and it is specially developed for adhesives. This product can be used for laminating packaging directly and it has Molecular Weight of 10000. It provides other good physical properties with a Hydroxyl Value of 10-12 mgKOH/g and an Acidic Value the is <1.5 mgKOH/g. 收起 | |
| POL-311 | Qingdao Xinyutian Chemical Co., Ltd. | POL-311 is a polyol compound that is part of the BG Series and it is mainly utilized in coatings, adhesives, artificial leather resins, waterborne polyurethanes and thermoplastic polyurethanes. It functions to increase the resistance to abrasion and teari...展开 POL-311 is a polyol compound that is part of the BG Series and it is mainly utilized in coatings, adhesives, artificial leather resins, waterborne polyurethanes and thermoplastic polyurethanes. It functions to increase the resistance to abrasion and tearing, while also increasing mechanical properties and density. This product has a Molecular Weight of 10000 and a Hydroxyl Value of 10-12 mgKOH/g. 收起 | |
| POL-3112 | Qingdao Xinyutian Chemical Co., Ltd. | POL-3112 is a polyol compound that is part of the BG Series and it is primarily used in thermoplastic polyurethanes, waterborne polyurethanes, adheasives and coating. It functions to increase the resistance to tearing and abrasion, while also increasing f...展开 POL-3112 is a polyol compound that is part of the BG Series and it is primarily used in thermoplastic polyurethanes, waterborne polyurethanes, adheasives and coating. It functions to increase the resistance to tearing and abrasion, while also increasing folding endurance and density. This product has a Molecular Weight of 1000 and a Viscosity of 380 cps @ 60°C. 收起 | |
| POL-3195 | Qingdao Xinyutian Chemical Co., Ltd. | POL-3195 is a polyol compound that is part of the BG Series and it is primarily used in adhesives, coatings, waterborne polyurethanes and thermoplastic polyurethanes (TPU). It functions to increase the resistance to tearing and abrasion, while also increa...展开 POL-3195 is a polyol compound that is part of the BG Series and it is primarily used in adhesives, coatings, waterborne polyurethanes and thermoplastic polyurethanes (TPU). It functions to increase the resistance to tearing and abrasion, while also increasing folding endurance and density. This product has a Molecular Weight of 600 and a Viscosity of 250 cps @ 60°C. 收起 | |
| POL-322 | Qingdao Xinyutian Chemical Co., Ltd. | POL-322 is a polyol compound that is part of the BG Series and it is mainly utilized in coatings, adhesives, artificial leather resins, waterborne polyurethanes and thermoplastic polyurethanes. It functions to increase the resistance to abrasion and teari...展开 POL-322 is a polyol compound that is part of the BG Series and it is mainly utilized in coatings, adhesives, artificial leather resins, waterborne polyurethanes and thermoplastic polyurethanes. It functions to increase the resistance to abrasion and tearing, while also increasing mechanical properties and density. This product has a Molecular Weight of 5000 and a Hydroxyl Value of 20-24 mgKOH/g. 收起 | |
| POL-328 | Qingdao Xinyutian Chemical Co., Ltd. | POL-328 is a polyol compound that is part of the BG Series and it is primarily used in waterborne polyurethanes, thermoplastic polyurethanes, adhesives, coatings and artificial leather resins. It functions to increase the resistance to abrasion and tearin...展开 POL-328 is a polyol compound that is part of the BG Series and it is primarily used in waterborne polyurethanes, thermoplastic polyurethanes, adhesives, coatings and artificial leather resins. It functions to increase the resistance to abrasion and tearing, while also increasing density and folding endurance. This product has a Molecular Weight of 4000 and a Hydroxyl Value of 26-30 mgKOH/g. 收起 | |
| POL-338 | Qingdao Xinyutian Chemical Co., Ltd. | POL-338 is a polyol compound that is part of the BG Series and it is primarily used in waterborne polyurethanes, thermoplastic polyurethanes, adhesives, coatings and artificial leather resins. It functions to increase the resistance to abrasion and tearin...展开 POL-338 is a polyol compound that is part of the BG Series and it is primarily used in waterborne polyurethanes, thermoplastic polyurethanes, adhesives, coatings and artificial leather resins. It functions to increase the resistance to abrasion and tearing, while also increasing density and folding endurance. This product has a Hydroxyl Value of 35-41 mgKOH/g and a Viscosity of 2400 cps @ 60°C. 收起 | |
| POL-345 | Qingdao Xinyutian Chemical Co., Ltd. | POL-345 is a polyol compound that is part of the BG Series and it is primarily used in waterborne polyurethanes, thermoplastic polyurethanes, adhesives, coatings and artificial leather resins. It functions to increase the resistance to abrasion and tearin...展开 POL-345 is a polyol compound that is part of the BG Series and it is primarily used in waterborne polyurethanes, thermoplastic polyurethanes, adhesives, coatings and artificial leather resins. It functions to increase the resistance to abrasion and tearing, while also increasing density and folding endurance. This product has a Hydroxyl Value of 42-48 mgKOH/g and a Molecular Weight of 2500. 收起 | |
| POL-3538 | Qingdao Xinyutian Chemical Co., Ltd. | POL-3538 is a polyol from the Other Compound Series that is widely used in adhesives, coatings, artificial leathers, shoe soles and elastomers. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This pa...展开 POL-3538 is a polyol from the Other Compound Series that is widely used in adhesives, coatings, artificial leathers, shoe soles and elastomers. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This particular grade has a Molecular Weight of 3000 but that can be adjusted to meet the needs of the customer. These compounds provide the products the ability to be abrasion resistance, tear resistant, and have good folding-endurance. 收起 | |
| POL-356 | Qingdao Xinyutian Chemical Co., Ltd. | POL-356 is a polyol compound that is part of the BG Series and it is primarily used in thermoplastic polyurethanes, waterborne polyurethanes, adheasives and coating. It functions to increase the resistance to tearing and abrasion, while also increasing fo...展开 POL-356 is a polyol compound that is part of the BG Series and it is primarily used in thermoplastic polyurethanes, waterborne polyurethanes, adheasives and coating. It functions to increase the resistance to tearing and abrasion, while also increasing folding endurance and density. This product has a Molecular Weight of 2000 and a Viscosity of 1300 cps @ 60°C. 收起 | |
| POL-456 | Qingdao Xinyutian Chemical Co., Ltd. | POL-456 is a polyol compound that is part of the PG Series and it is primarily utilized in polyurethane hot melt adhesives, artificial leather resins and elastomers. This compound helps the finished product increase its density as well as provide a resist...展开 POL-456 is a polyol compound that is part of the PG Series and it is primarily utilized in polyurethane hot melt adhesives, artificial leather resins and elastomers. This compound helps the finished product increase its density as well as provide a resistance to abrasion and tearing. It has a Molecular Weight of 2000 and a Hydroxyl Value of 53-59 mgKOH/g. 收起 | |
| POL-500 | Qingdao Xinyutian Chemical Co., Ltd. | POL-511 is a polyol that is part of the Ultrahigh Molecular Weight Series and it is specially developed for adhesives. This product can be used for laminating packaging directly and it has Molecular Weight of 10000. It provides other good physical propert...展开 POL-511 is a polyol that is part of the Ultrahigh Molecular Weight Series and it is specially developed for adhesives. This product can be used for laminating packaging directly and it has Molecular Weight of 10000. It provides other good physical properties with a Hydroxyl Value of 10-12 mgKOH/g and a Water Value that is <0.03%. 收起 | |
| POL-5112 | Qingdao Xinyutian Chemical Co., Ltd. | POL-5112 is a polyol compound that is part of the HD Series and it is primarily utilized in elastomers, artificial leather resins and polyurethane hot melt adhesives. This compound helps the finished product increase its density as well as provide a resis...展开 POL-5112 is a polyol compound that is part of the HD Series and it is primarily utilized in elastomers, artificial leather resins and polyurethane hot melt adhesives. This compound helps the finished product increase its density as well as provide a resistance to abrasion and tearing. It has a Molecular Weight of 1000 and a Hydroxyl Value of 106-118 mgKOH/g. 收起 | |
| POL-5224 | Qingdao Xinyutian Chemical Co., Ltd. | POL-5224 is a polyol compound that is part of the HD Series and it is primarily utilized in artificial leather resins, polyurethane hot melt adhesives and elastomers. This product will provide an excellent resistance to tearing, abrasion, and also increas...展开 POL-5224 is a polyol compound that is part of the HD Series and it is primarily utilized in artificial leather resins, polyurethane hot melt adhesives and elastomers. This product will provide an excellent resistance to tearing, abrasion, and also increase folding endurance. It has a Molecular Weight of 500 and a Hydroxyl Value of 215-233 mgKOH/g. 收起 | |
| POL-538 | Qingdao Xinyutian Chemical Co., Ltd. | POL-538 is a polyol compound that is part of the HD Series and it is primarily utilized in elastomers, artificial leather resins and polyurethane hot melt adhesives. This compound helps the finished product increase its density as well as provide a resist...展开 POL-538 is a polyol compound that is part of the HD Series and it is primarily utilized in elastomers, artificial leather resins and polyurethane hot melt adhesives. This compound helps the finished product increase its density as well as provide a resistance to abrasion and tearing. It has a Molecular Weight of 3000 and a Hydroxyl Value of 35-41 mgKOH/g. 收起 | |
| POL-556 | Qingdao Xinyutian Chemical Co., Ltd. | POL-556 is a polyol compound that is part of the HD Series and it is primarily utilized in elastomers, artificial leather resins and polyurethane hot melt adhesives. This compound helps the finished product increase its density as well as provide a resist...展开 POL-556 is a polyol compound that is part of the HD Series and it is primarily utilized in elastomers, artificial leather resins and polyurethane hot melt adhesives. This compound helps the finished product increase its density as well as provide a resistance to abrasion and tearing. It has a Molecular Weight of 2000 and a Hydroxyl Value of 53-59 mgKOH/g. 收起 | |
| POL-5776 | Qingdao Xinyutian Chemical Co., Ltd. | POL-5776 is a polyol from the Other Compound Series that is widely used in adhesives, coatings, artificial leathers, shoe soles and elastomers. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This pa...展开 POL-5776 is a polyol from the Other Compound Series that is widely used in adhesives, coatings, artificial leathers, shoe soles and elastomers. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This particular grade has a Molecular Weight of 1500 but that can be adjusted to meet the needs of the customer. These compounds provide the products the ability to be abrasion resistance, tear resistant, and have good folding-endurance. 收起 | |
| POL-6112 | Qingdao Xinyutian Chemical Co., Ltd. | POL-6112 is a polyol from the MPD Series and is widely used in adhesives, coatings and elastomers. This product is liquid at room temperature and has a molecular weight of 1000 which can be adjusted to desired requirements. It has the characteristics of w...展开 POL-6112 is a polyol from the MPD Series and is widely used in adhesives, coatings and elastomers. This product is liquid at room temperature and has a molecular weight of 1000 which can be adjusted to desired requirements. It has the characteristics of water, provides good aging resistance, and has moisture content that is <0.3%. 收起 | |
| POL-638 | Qingdao Xinyutian Chemical Co., Ltd. | POL-638 is a polyol from the MPD Series and is widely used in adhesives, coatings and elastomers. This product is liquid at room temperature and has a molecular weight of 3000 which can be adjusted to desired requirements. It has the characteristics of wa...展开 POL-638 is a polyol from the MPD Series and is widely used in adhesives, coatings and elastomers. This product is liquid at room temperature and has a molecular weight of 3000 which can be adjusted to desired requirements. It has the characteristics of water, provides good aging resistance, and has moisture content that is <0.3%. 收起 | |
| POL-656 | Qingdao Xinyutian Chemical Co., Ltd. | POL-656 is a polyol from the MPD Series and is widely used in adhesives, coatings and elastomers. This product is liquid at room temperature and has a molecular weight of 2000 which can be adjusted to desired requirements. It has the characteristics of wa...展开 POL-656 is a polyol from the MPD Series and is widely used in adhesives, coatings and elastomers. This product is liquid at room temperature and has a molecular weight of 2000 which can be adjusted to desired requirements. It has the characteristics of water, provides good aging resistance, and has moisture content that is <0.3%. 收起 |
