| Antimussol® 4752 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 消泡剂，用于水性配方的油漆、颜料和聚合物分散体。 | |
| Antimussol® 4846N | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于水性配方的消泡剂。 | |
| Antimussol® TIP | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 一般用途的废水消泡剂. | |
| Antimussol® TW Liquid | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 消泡剂，用于水性配方的油漆、颜料和聚合物分散体。 | |
| Antimussol® V 5084 Liquid | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 消泡剂，用于水性配方的油漆、颜料和聚合物分散体。 | |
| Antimussol® V 5348 Liquid | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于水性配方的消泡剂。特别适合于低粘度和非着色的体系。 | |
| Arkopal® N 040 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于化学工业的非离子表面活性剂。 | |
| Arkopal® N 060 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于化学工业的非离子表面活性剂。 | |
| Arkopal® N 080 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于化学工业的非离子表面活性剂。 | |
| Arkopal® N 090 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于化学工业的非离子表面活性剂。 | |
| Arkopal® N 100 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于化学工业的非离子表面活性剂。 | |
| Arkopal® N 1000 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于化学工业的非离子表面活性剂、乳化剂量和分散剂。 | |
| Arkopal® N 110 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于化学工业的非离子表面活性剂。 | |
| Arkopal® N 130 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于化学工业的非离子表面活性剂。 | |
| Arkopal® N 150 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于化学工业的非离子表面活性剂。 | |
| Arkopal® N 230 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于化学工业的非离子表面活性剂。 | |
| Arkopal® N 238 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 非离子乳化剂，用于颜料色浆，蜡和乳液聚合。 | |
| Arkopal® N 300 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于化学工业的非离子表面活性剂。 | |
| Arkopal® N 307 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 非离子乳化剂，用于颜料色浆，蜡和乳液聚合。 | |
| Arkopal® N 308 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于化学工业的非离子乳化剂。 | |
| Arkopon® T Paste 8015 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 涂料用阴离子乳化剂、湿润和分散助剂。 | |
| D-FOAM-R C113 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | D-FOAM-R C11是一款100％活性含量的泡沫控制添加剂，专为水基涂料配方体系设计。特别适合用与合成乳胶涂料。可以在研磨或调漆过程中加入。可快速破泡。 | |
| D-FOAM-R C113E | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | D-FOAM-R C113E 是一款100％活性含量的泡沫控制添加剂，专为水基涂料配方体系设计。特别适合用与合成乳胶涂料。可快速破泡。推荐在调漆过程中添加。 | |
| D-FOAM-R C114 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | D-FOAM-R C114是一款100％活性含量的泡沫控制添加剂。在多种合成聚合物体系的涂料配方中都有非常好的效果和相容性。推荐在研磨或调漆过程中添加。 | |
| D-FOAM-R C114E | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | D-FOAM-R C114E是一款100％活性含量的有机消泡剂，用于水性涂料体系。在多种合成聚合物体系的涂料配方中都非常容易添加，效果出众并具有优异的相容性。推荐在调漆过程中添加。 | |
| D-FOAM-R C117 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | D-FOAM-R C117 是一款100％活性的有机消泡剂。专门为水基涂料体系设计。非常容易添加，非常高效，可以复配于众多含有合成聚合物的涂料配方中。 通常在调漆过程中添加。 | |
| D-FOAM-R C330 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | D-FOAM-R C330是一款高效、不含硅的泡沫控制添加剂，专门为水基油墨、涂料和胶粘剂配方设计。非常容易添加，在颜料研磨过程中使用效果优异。也可以在很多配方体系中作为调漆消泡剂使用。该原料不含任何矿物油，具有非常低的VOC(挥发份），在丙烯酸，苯乙烯/丙烯酸、聚乙烯醇、醋酸乙烯及淀粉基涂料和胶粘剂配方中效果优异。 | |
| D-FOAM-R C740 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | D-FOAM-R C740是一款非常高效的含硅消泡剂，非常容易添加，可复配于众多水基油墨和涂料配方中。在高速旋转过程中，能快速消泡并效果持久。对细微泡沫有优异的控制效果。 | |
| D-FOAM-R C920 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | D-FOAM-R C920是一款100％活性成分的硅基消泡剂。特别为UV, EB和溶剂基油墨及涂料配方设计。对泡沫和混入体系的空气有非常好的控制作用，和很多配方体系有很好的相容性。 | |
| Diethylene Glycol Dibutyl Ether | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 澄清无色的非质子溶剂。该乙二醇二醚具有低结冰点、高沸点、低粘度和活性溶解力。它可以任何比例与大部分有机溶剂混溶。与水不混溶。可用于丙烯酸酯树脂和油墨 | |
| Diethylene Glycol Dimethyl Ether | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Diethylene Glycol Dimethyl Ether is a neutral, slightly volatile, colorless liquid. Because of the free electron pairs at the oxygen atoms it has high solvating power and is miscible with water and all common solvents in any ratio. As a result of its chem...展开 Diethylene Glycol Dimethyl Ether is a neutral, slightly volatile, colorless liquid. Because of the free electron pairs at the oxygen atoms it has high solvating power and is miscible with water and all common solvents in any ratio. As a result of its chemical stability and the absence of reactive groups, Diethylene glycol dimethyl ether can be used as an inert reaction medium for many organic and organometallic reactions and for polymerizations. 收起 | |
| Dipropylene Glycol Dimethyl Ether | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 带清香的无色液体，代替NMP。出色的辅助成膜和耦合剂，具有高溶解力。微溶于水。用于水性PU分散体，双组分PU涂料，脱漆剂和抗涂鸦涂料 | |
| Dispersogen® 1728 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于水性和溶剂型颜料制品、分散染料和印刷油墨的阴离子分散助剂。 | |
| Dispersogen® 2774 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 非离子型分散剂，用于水性和溶剂型色浆和印刷油墨。 | |
| Dispersogen® 2774-1 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 非离子型分散剂，用于分散水性色浆中难分散的无机颜料。 | |
| Dispersogen® 2774-2 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于水性色浆的非离子型分散剂。 | |
| Dispersogen® 3169 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于水性和溶剂型颜料制品、分散染料和印刷油墨的阴离子分散助剂。 | |
| Dispersogen® 4387 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于水性和溶剂型颜料制品、纸张印刷油墨、织物印刷色浆和涂料的阴离子分散助剂。 | |
| Dispersogen® ASN Powder | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 颜料分散剂和颜料的制备。 | |
| Dispersogen® LFH | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于水性 溶剂型颜料制品的阴离子分散助剂。 | |
| Dispersogen® LFS | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于水性和溶剂型颜料制品的阴离子分散助剂。 | |
| Dispersogen® UDN | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 一种非离子润湿和分散助剂混合物，用于油漆和涂料中水性颜料的分散和制备。 | |
| Dodigen® 4131 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于制造亲有机质膨润土的表面活性剂。也可用作抗静电剂。 | |
| Dodigen® 4140 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 一种用于油田废水、工业废水和生产用水处理的季铵混合物。 | |
| DYHARD® 100 | AlzChem AG | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...展开 DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100S | AlzChem AG | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...展开 DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100SF | AlzChem AG | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100SH | AlzChem AG | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® A5M30 | AlzChem AG | DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions | |
| DYHARD® CAAB | AlzChem AG | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...展开 DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. 收起 | |
| DYHARD® D50EP | AlzChem AG | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...展开 DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. 收起 | |
| DYHARD® DF50EP | AlzChem AG | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
| DYHARD® Fluid 111 | AlzChem AG | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
| DYHARD® Fluid 151 | AlzChem AG | DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® Fluid 212 | AlzChem AG | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® Fluid AC11 | AlzChem AG | DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® MCA10 | AlzChem AG | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
| DYHARD® MCA30 | AlzChem AG | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
| DYHARD® MI-C | AlzChem AG | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MI-FF | AlzChem AG | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MIA5 | AlzChem AG | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...展开 DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. 收起 | |
| DYHARD® OTB | AlzChem AG | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
| DYHARD® PI | AlzChem AG | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
| DYHARD® PI-FF | AlzChem AG | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
| DYHARD® PIN | AlzChem AG | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
| DYHARD® PMC | AlzChem AG | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
| DYHARD® RF1000 | AlzChem AG | DYHARD® RF1000 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® RF2100 | AlzChem AG | DYHARD® RF2100 is a low viscos modified bisphenol A epoxy resin. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® UR200 | AlzChem AG | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300 | AlzChem AG | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300AB | AlzChem AG | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR400 | AlzChem AG | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...展开 DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® UR500 | AlzChem AG | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® UR700 | AlzChem AG | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...展开 DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. 收起 | |
| DYHARD® UR800 | AlzChem AG | DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® URAcc13 | AlzChem AG | DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® URAcc57 | AlzChem AG | DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| Easaqua™ L 600 | Vencorex | Easaqua™ L 600 is a low viscosity water dispersible aliphatic polyisocyanate. It exhibits several benefits, including optimal balance between low viscosity, high NCO content and emulsification ability; excellent humidity and moisture resistance, and impro...展开 Easaqua™ L 600 is a low viscosity water dispersible aliphatic polyisocyanate. It exhibits several benefits, including optimal balance between low viscosity, high NCO content and emulsification ability; excellent humidity and moisture resistance, and improved adhesion onto a wide range of substrates. This product is a hardener for high performance, light fastening, two-pack waterborne polyurethane coatings. It is recommended for plastic coatings, metal coatings, flooring coatings, and adhesives. 收起 | |
| Easaqua™ M 501 | Vencorex | Easaqua™ M 501 is a water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, and shows a lower viscosity and hydrophilicity compared to Easaqua™ M 502. It is used as a hardener of two-pack waterborne high performance po...展开 Easaqua™ M 501 is a water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, and shows a lower viscosity and hydrophilicity compared to Easaqua™ M 502. It is used as a hardener of two-pack waterborne high performance polyurethane coatings on various substrates, like wood, metal and plastics. This product can also be used as a solvent-free hardener of ultra-low VOC mat clearcoats or semigloss pigmented paints. 收起 | |
| Easaqua™ M 502 | Vencorex | Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane co...展开 Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane coatings on various substrates, like metal, plastics, wood, and concrete. Easaqua™ M 502 is also suggested as a crosslinker of paint and varnish formulations with very low VOC. 收起 | |
| Easaqua™ WAT-3 | Vencorex | Easaqua™ WAT-3 is a water dispersible crosslinker based on aliphatic polyisocyanate (HDI homopolymer). It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WAT-1. This product is suggested as a hardener of two-pack waterb...展开 Easaqua™ WAT-3 is a water dispersible crosslinker based on aliphatic polyisocyanate (HDI homopolymer). It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WAT-1. This product is suggested as a hardener of two-pack waterborne polyurethane leather finishing topcoats for automotive, upholstery and accessory leather products as well as 3D lamination applications in the automotive and furniture industries. Easaqua™ WAT-3 is also used as a crosslinker of waterborne adhesives for shows and wood to obtain D4 classification according to EN 204. 收起 | |
| Easaqua™ WAT-4 | Vencorex | Easaqua™ WAT-4是一种以脂质聚异氰酸酯（HDI均聚物）为基础的在水中可分散的交联剂。它不包含任何烷基酚乙氧基化物。它是Easaqua™ WAT的不含APEO版本。这款产品用作在鞋和木头上使用的水基粘合剂的交联剂，根据EN204获得D4分类。它还推荐用作双组分水性聚氨酯皮革涂饰面漆的固化剂，用于汽车、家居装饰用品，配套皮革用品以及3D层压应用等汽车和家具行业。 | |
| Easaqua™ X D 401 | Vencorex | Easaqua™ X D 401 is a fast drying water-dispersible aliphatic polyisocyanate, supplied in n-butyl acetate. It does not contain any alkyl phenol ethoxylate. This product is suggested as a fast drying hardener of two-pack waterborne high-performance polyure...展开 Easaqua™ X D 401 is a fast drying water-dispersible aliphatic polyisocyanate, supplied in n-butyl acetate. It does not contain any alkyl phenol ethoxylate. This product is suggested as a fast drying hardener of two-pack waterborne high-performance polyurethane coatings on various substrates, like wood, metal, and plastics. 收起 | |
| Easaqua™ X D 803 | Vencorex | Easaqua™ X D 803 is a fast drying ready-to-use water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, has a low odour, and is not labelled as flammable. This product is suggested for use as a fast drying hardener of t...展开 Easaqua™ X D 803 is a fast drying ready-to-use water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, has a low odour, and is not labelled as flammable. This product is suggested for use as a fast drying hardener of two-pack waterborne high performance polyurethane coatings on various substrates, like wood, metal, and plastics. 收起 | |
| Easaqua™ X D 870 | Vencorex | Easaqua™ X D 870 is a ready to use product, easily dispersed in aqueous formulation. This product is ideal for onsite application : Parquet repair and concrete flooring an also recommended for a variety of industrial applications; wood and metal coatings....展开 Easaqua™ X D 870 is a ready to use product, easily dispersed in aqueous formulation. This product is ideal for onsite application : Parquet repair and concrete flooring an also recommended for a variety of industrial applications; wood and metal coatings. Easaqua™ X D 870 is a unique combination of Easaqua™ Technology and HDI/IPDI derivatives suitable to comply with European VOC emissions regulations. 收起 | |
| Emulsogen® 3896 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于乳液聚合的乳化剂。 | |
| Emulsogen® 4084 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于乳液聚合的非离子乳化剂。 | |
| Emulsogen® APG 2019 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 可共聚阴离子乳化剂和亲水单体，用于乳液聚合。 | |
| Emulsogen® APS 100 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 可共聚阴离子乳化剂和亲水单体，用于乳液聚合。 | |
| Emulsogen® APS 100 S | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 可共聚阴离子乳化剂和亲水单体，用于乳液聚合。 | |
| Emulsogen® DMR | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于基于矿物油的乳液增稠剂的乳化剂。 | |
| Emulsogen® EPA 073 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于制造纸张和纸板涂料的颜料主体树脂的阴离子乳化剂、湿润和分散助剂。 | |
| Emulsogen® EPA 1954 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 工业涂装用阴离子乳化剂。 | |
| Emulsogen® LA 083 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于乳液聚合的阴离子乳化剂和用于颜料的分散助剂。 | |
| Emulsogen® LCA 073 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 工业涂装用阴离子乳化剂、湿润和分散助剂。 | |
| Emulsogen® LCN 050 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 非离子乳化剂和润湿剂，用于乳液，洗洁剂，涂料和油漆。 | |
| Emulsogen® LCN 070 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于工业领域的非离子乳化剂、润湿剂和分散剂。 | |
| Emulsogen® LCN 088 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于工业领域的非离子乳化剂、润湿剂和分散剂。 | |
| Emulsogen® LCN 118 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于乳液聚合的非离子乳化剂。 | |
| Emulsogen® LCN 158 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | 用于乳液聚合的非离子乳化剂。 |
