| ACEMATT® 3300 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 3300是一种气相二氧化硅，是ACEMATT® 消光剂产品家族的一种，具有很多激动人心的优点。ACEMATT® 3300也具有附加的优点，可为柔感涂料提供一种雅致的消光表面，可提升质感，也就是众所周知的柔软触感 | Request Sample |
| ACEMATT® 3400 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 3400 is a matting agent exhibiting a multitude of exciting benefits. In solvent and waterborne coatings, the surface modification leads to an outstanding suspension behavior. In waterborne systems, there is only a minimum adsorption of associativ...展开 ACEMATT® 3400 is a matting agent exhibiting a multitude of exciting benefits. In solvent and waterborne coatings, the surface modification leads to an outstanding suspension behavior. In waterborne systems, there is only a minimum adsorption of associative thickeners resulting in improved rheology stability. Excellent transparency is obtained making it ideal for clear wood coatings, as observed by the depth of color when applied over colored substrates. 收起 | Request Sample |
| ACEMATT® 3600 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 3600是一种微颗粒状二氧化硅，作为特别有机聚合物使用，是专门为低光泽的辐射固化涂料而设计的。与传统的二氧化硅消光剂相比，ACEMATT® 3600对UV涂料的粘性影响较小。ACEMATT® 3600还具有高消光效率，在UV涂料系统中出色的透明度和易于加工等其他特点。 | Request Sample |
| ACEMATT® 790 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 790 as untreated, fine particle sized precipitated silica is distinguished by high matting efficiency and particularly suitable for pigmented coatings systems. | Request Sample |
| ACEMATT® 810 | Evonik Operations GmbH, BL Coating Additives | 赢创的新型消光剂ACEMATT®810：在过去的两年内，由很多客户测试和验证过其高消光效率，ACEMATT®810是赢创消光剂组合中不可或缺的一部分。ACEMATT®810作为未经处理的粗粒沉淀二氧化硅，由于高光效率高而区别于其他产品，并特别适合用于色漆系统。 | Request Sample |
| ACEMATT® HK 125 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅，适合各种油漆和涂料应用。ACEMATT® HK 125是一种经济的未经处理的硅土，具有不同种类的粒径分布，适合一般用途 | Request Sample |
| ACEMATT® HK 390 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 390 is an untreated, finer grade matting agent based on precipitated silica. Providing very high compatibility it can be used in a large variety of coatings. The improved orientation in coating systems effectively prevents mottling. | Request Sample |
| ACEMATT® HK 400 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅，适合各种油漆和涂料应用。ACEMATT® HK 400是一种通用型未经处理的消光剂。它适合所有不需要有机表面处理的应用 | Request Sample |
| ACEMATT® HK 440 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 440是一种非常高效的未经处理的消光（无光）助剂。ACEMATT® HK 440设计用于需要低光泽的涂料应用例如卷钢涂料、屋顶涂料、醇酸清漆 | Request Sample |
| ACEMATT® HK 520 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 520 is an untreated, medium particle-sized precipitated silica. Providing very high compatibility it can be used in a large variety of coatings. The improved orientation in coating systems effectively prevents mottling. | Request Sample |
| ACEMATT® OK 390 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 390 is a wax-treated, finer-grade matting agent based on precipitated silica. Providing very high compatibility it can be used in a large variety of coatings. | Request Sample |
| ACEMATT® OK 412 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅，适合各种油漆和涂料应用。ACEMATT® OK 412是一种有机表面处理的易分散的消光剂，适合一般应用。该消光剂可获取异常杰出的表面特性，以及出色的滑爽效果，也适合有色涂料。由于它具有杰出的悬浮效果，它特别适合用于透明涂料 | Request Sample |
| ACEMATT® OK 500 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅，适合各种油漆和涂料应用。ACEMATT® OK 500是一种经有机表面处理的易分散的消光剂，适合一般应用。该消光剂具有异常杰出的表面特性以及出色的滑爽效果，也适合有色涂料。由于它具有杰出的悬浮特性，它尤其适合用于透明涂料 | Request Sample |
| ACEMATT® OK 520 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅，适合各种油漆和涂料应用。ACEMATT® OK 520是一种易分散、经有机表面处理的消光剂，适合一般应用。该消光剂具有异常杰出的表面特性以及出色的滑爽效果，也适合有色涂料。由于它具有杰出的悬浮特性，它尤其适合用于透明涂料 | Request Sample |
| ACEMATT® OK 607 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅，适合各种油漆和涂料应用。ACEMATT® OK 607是一种易分散、经有机表面处理的消光剂，具有非常低的平均粒径。该消光剂具有异常杰出的表面特性以及出色的滑爽效果，也适合有色涂料。由于它具有杰出的悬浮特性，它尤其适合用于透明涂料 | Request Sample |
| ACEMATT® OK 607 LC | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 607 LC is a very fine-grained wax after-treated precipitated silica. It is mainly used as a high-purity filler for e-coats due to its outstanding suspension behaviour and low electrical conductivity. | Request Sample |
| ACEMATT® OK 900 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 900 is a highly efficient, medium particle-sized, wax-treated precipitated silica. It is especially recommended for coil coatings as well as general industrial coatings. | Request Sample |
| ACEMATT® TS 100 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅，适合各种油漆和涂料应用。ACEMATT® TS 100是一种热的未经处理的消光剂。ACEMATT® TS 100的特征是它的杰出的消光效率和透明度 | Request Sample |
| ADDID® 900 | Evonik Operations GmbH, BL Coating Additives | 二氨基官能三甲氧基硅烷增粘剂。 | Request Sample |
| ADDID® 911 | Evonik Operations GmbH, BL Coating Additives | ADDID® 911 is an adhesion promoter for solventborne and waterborneprimers and coating formulations. It is based on an epoxy-functional silane. | Request Sample |
| AERODISP® W 7520 | Evonik Operations GmbH, BL Coating Additives | 低粘度AEROSIL®气相二氧化硅水性乳液，具有轻微碱性pH值 | Request Sample |
| AERODISP® W 7520 N | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 N是一种AEROSIL®气相二氧化硅的低粘度水性乳液，具有轻微碱性的pH值 | Request Sample |
| AERODISP® W 7520 NF | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 NF is an aqueous dispersion of a hydrophilic fumed silica with an alkaline pH-value, which is recommended for food contact applications. | Request Sample |
| AERODISP® W 7520 P | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 P is a low viscosity, water-based dispersionof AEROSIL® fumed silica, with a slightly alkaline pH. | Request Sample |
| AERODISP® WF 7620 | Evonik Operations GmbH, BL Coating Additives | AERODISP® WF 7620 is an aqueous dispersion containing 20 weight % active material of a functionalized AEROSIL®. | Request Sample |
| AERODISP® WR 8520 | Evonik Operations GmbH, BL Coating Additives | AERODISP® WR 8520是一种憎水型AEROSIL®的特殊的、纹理的、高填充的乳液。它可轻易有效地改善水性有色涂料和水性透明涂料的增稠和触变性、抗沉降性、颜料稳定效果以及机械性能 | Request Sample |
| AEROSIL® 200 | Evonik Operations GmbH, BL Coating Additives | 一种亲水气相二氧化硅，比表面积为200m2/g。用于油漆、涂料、粘胶和密封剂、印刷油墨、食品和化妆品、电缆复合材料和凝胶、硅树脂橡胶，也用于工厂防护。 | Request Sample |
| AEROSIL® 300 | Evonik Operations GmbH, BL Coating Additives | 一种亲水气相二氧化硅，比表面积为300m2/g。用于油漆、涂料、粘胶和密封剂、印刷油墨、电缆复合材料和凝胶、硅树脂橡胶。 | Request Sample |
| AEROSIL® 380 | Evonik Operations GmbH, BL Coating Additives | 一种亲水气相二氧化硅，比表面积为380m2/g。用于油漆、涂料、粘胶和密封剂、印刷油墨、电缆复合材料和凝胶、硅树脂橡胶。 | Request Sample |
| AEROSIL® 4200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking cha...展开 AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking characteristics of powders as well as an anti-settling, thickening, and anti-sagging agent. 收起 | Request Sample |
| AEROSIL® COK 84 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® COK 84 is a formulated product with highly dispersed fumed aluminium oxide in the ratio of 5:1. | Request Sample |
| AEROSIL® E 805 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® E 805 is a fumed silica after being treated with organosilane. It provides extraordinary rheological properties by keeping brilliant transparency. In addition, it is very easy to disperse. | Request Sample |
| AEROSIL® E 812 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® E 812 is a fumed silica post-treated with organosilane (HMDS) and a high specific surface area combined with exceptional hydrophobicity. In addition, it is very easy to disperse. | Request Sample |
| AEROSIL® E 9200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® E 9200 is a structure-modified, hydrophobic fumed silica. Enables high loading levels at low viscosities. In addition, it is very easy to disperse. | Request Sample |
| AEROSIL® E 972 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® E 972 is a fumed silica after being treated with DDS (dimethyldichlorosilane). It is a very efficient Rheology Modifier suitable for a broad range of applications while being very easy to disperse. | Request Sample |
| AEROSIL® MOX 80 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® MOX 80是一种含二氧化硅和约1%氧化铝的混合氧化物，通过AEROSIL®工艺制备 | Request Sample |
| AEROSIL® OX 50 | Evonik Operations GmbH, BL Coating Additives | 具有最小比表面积的颗粒热解法氧化物。高化学纯度、独特的低增稠性和聚集性为典型特征。被用于PET膜、牙复合物和制造超纯度的石英玻璃。 | Request Sample |
| AEROSIL® R 106 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 106 is a hydrophobic fumed silica surface treated with D4 (octamethylcyclotetrasiloxane). | Request Sample |
| AEROSIL® R 202 | Evonik Operations GmbH, BL Coating Additives | 气相二氧化硅，用聚甲基硅氧烷做后处理。 用于粘胶和密封剂、乙烯环氧树脂和电缆胶衣。 | Request Sample |
| AEROSIL® R 208 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 208是一种经聚二甲硅氧烷处理的气相二氧化硅。它显示了良好的增稠性和在复杂极性液体（如环氧基树脂，聚氨酯或乙烯基树脂等）中良好的触变性。它同时有良好的抗流挂性和出色的耐水性。 | Request Sample |
| AEROSIL® R 7200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 7200 is a structure modified fumed silica after treated with methacrylsilane. | Request Sample |
| AEROSIL® R 805 | Evonik Operations GmbH, BL Coating Additives | 气相二氧化硅，在Aerosil® 200基础上用辛基硅烷做后处理。 用于油漆和涂料、粘胶和密封剂，以及环氧复合涂料体系。 | Request Sample |
| AEROSIL® R 812 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 812 is a fumed silica after-treated with organosilane (HDMDS) with high specific surface and marked hydrophobia. | Request Sample |
| AEROSIL® R 812 S | Evonik Operations GmbH, BL Coating Additives | 气相二氧化硅，在Aerosil® 300基础上用HMDS做后处理。 用于油漆和涂料、粘胶和密封剂，以及硅树脂橡胶。 | Request Sample |
| AEROSIL® R 816 | Evonik Operations GmbH, BL Coating Additives | 气相二氧化硅， 以Aerosil® 200为基础用十六烷基硅烷做后处理。 用于水性涂料。 | Request Sample |
| AEROSIL® R 8200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 8200 is a structure-modified, highly hydrophobic fumed silica. Due to its low thickening efficiency, high loading levels at low viscosities are achievable. | Request Sample |
| AEROSIL® R 9200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 9200 is a structure modified, hydrophobic fumed silica. | Request Sample |
| AEROSIL® R 972 | Evonik Operations GmbH, BL Coating Additives | 一种憎水气相二氧化硅，基于比表面积为130 m2/g的亲水气相二氧化硅，用二甲基二氯硅烷后处理。 | Request Sample |
| AEROSIL® R 972 V | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 972 V is a densified hydrophobic fumed silica, after treated with DDS (Dimethyldichlorosilane). Due to the densification it shows a weaker rheological effect than AEROSIL® R 972. | Request Sample |
| AEROSIL® R 974 | Evonik Operations GmbH, BL Coating Additives | 一种憎水气相二氧化硅，基于比表面积为200 m2/g的亲水气相二氧化硅，用二甲基二氯硅烷后处理。 | Request Sample |
| AEROSIL® TT 600 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which i...展开 AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which is different from all other silica grades in the portfolio. For instance, the product is recommended as a matting agent or anti-blocking additive with adsorption properties and high transparency. 收起 | Request Sample |
| AEROXIDE® ALU 130 | Evonik Operations GmbH, BL Coating Additives | AEROXIDE® ALU 130 is a very fine-particle fumed aluminum oxide with a very high specific surface area. The positive surface charge makes it ideal to control the electrostatic charge in powder coatings. | Request Sample |
| AEROXIDE® ALU C | Evonik Operations GmbH, BL Coating Additives | 它是一种火法工艺制成的颗粒非常细的氧化金属，具有高比表面积。由于正电荷的特殊性能，产品具有多种用途。可用于PET-膜、荧光灯和灯泡、粉末涂料和高品质纸张喷墨涂料。 | Request Sample |
| AIRASE® 5100 | Evonik Operations GmbH, BL Coating Additives | AIRASE® 5100 is a highly effective defoamer concentrate based on polyether siloxane technology. Excellent defoaming ability. | Request Sample |
| Airase® 5355 Defoamer | Evonik Operations GmbH, BL Coating Additives | Airase® 5355 Defoamer is a relatively strong proprietary siloxane based defoamer designed to control and quickly eliminate foam without generating surface defects in waterbased pigment grinds, inks, overprint varnishes, adhesives and coatings. It does not...展开 Airase® 5355 Defoamer is a relatively strong proprietary siloxane based defoamer designed to control and quickly eliminate foam without generating surface defects in waterbased pigment grinds, inks, overprint varnishes, adhesives and coatings. It does not contain added mineral oils, hazardous air pollutants (HAPs) or alkyl phenol ethoxylates (APEs). Airase® 5355 Defoamer is especially suited for waterbased applications requiring broad food contact compliances. 收起 | Request Sample |
| Airase® 8070 Deaerator | Evonik Operations GmbH, BL Coating Additives | Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface...展开 Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface defects. Airase® 8070 Deaerator can be especially effective against microfoam because it is designed to leave a defect-free surface, even when thick layers are applied or highly vicous coatings are sprayed. Airase® 8070 Deaerator contains no chemicals that are considered VOCs per the European Solvent Directive or the European Decorative Paint Directive; it contributes no VOCs nder EPA Method 24 testing conditions when evaluated at typical used levels (1% by weight) in a zero-VOC coating formulation. Additionally, Airase® 8070 Deaerator contains no added alkylphenol ethoxylates (APEs) or hazardous air pollutants (HAPs). 收起 | Request Sample |
| ALBIDUR® 1223 | Evonik Operations GmbH, BL Coating Additives | ALBIDUR® 1223可提高基于SILIKOPON® EF和SILIKOFTAL® ED的防腐涂料的柔韧性，使配方性能更加完善。它不会迁移、不含有机溶剂且不受标签要求的限制。 | Request Sample |
| ALBIDUR® EP 2240 A | Evonik Operations GmbH, BL Coating Additives | ALBIDUR® EP 2240 A shows the highest performance in enhancing impact resistance without influencing chemical or corrosion resistance properties of pigmented epoxy coatings. | Request Sample |
| ALBIDUR® PU 5640 | Evonik Operations GmbH, BL Coating Additives | ALBIFLEX® 348是一种黄色不透明的液体，双酚A环氧硅嵌段共聚物。该活性树脂改性剂用于底漆/填料和面漆，用于溶剂型和无溶剂型双组分和热固化环氧树脂配方。该产品不会降低透明度，具有出色的柔韧性。它也增加了附着力和极好的耐水性。ALBIFLEX® 348良好的保存了网密度，不改变机械性能，对芳香族环氧树脂具有良好的相容性。 | Request Sample |
| Carbowet® 106 Surfactant | Evonik Operations GmbH, BL Coating Additives | 多官能团、低起泡、不含溶剂和烷基酚乙氧基化物的助剂，用于颜料和基材润湿 | Request Sample |
| CARBOWET® 109 Surfactant | Evonik Operations GmbH, BL Coating Additives | 经济有效的表面活性剂，可提供快速的基材和颜料润湿，适合各种应用场合 | Request Sample |
| Carbowet® 138 Surfactant | Evonik Operations GmbH, BL Coating Additives | CARBOWET® 138表面活性剂是一种多功能添加剂，适用于颜料和基材润湿。这种非离子型表面活性剂通常是单独使用或与阴离子表面活性剂组合使用。该成本有效的表面活性剂可提供快速基材和颜料润湿性，并适合各种应用。 | Request Sample |
| Carbowet® GA-100 Surfactant | Evonik Operations GmbH, BL Coating Additives | 该表面活性剂是非离子型表面活性剂的混合物，其特征为多功能、低起泡、无溶剂、无烷基酚乙氧基化物添加剂，用于颜料和基材润湿。该独特专利技术的混合物，可用于提供快速基材和颜料润湿，而且在建筑漆配方和水性颜料分散体中具有与共用增稠剂更佳的相容性 | Request Sample |
| Carbowet® GA-210 Surfactant | Evonik Operations GmbH, BL Coating Additives | Carbowet® GA-210 Surfactant is a formulated nonionic additive for use in a wide range of applications. This multifunctional, low- foaming grind aid can provide rapid pigment and substrate wetting and is an environmentally preferable alternative to APE- co...展开 Carbowet® GA-210 Surfactant is a formulated nonionic additive for use in a wide range of applications. This multifunctional, low- foaming grind aid can provide rapid pigment and substrate wetting and is an environmentally preferable alternative to APE- containing surfactants. It is designed to assist in the formulation of low- to zero-VOC coatings while offering improved color development, freeze-thaw stability, and scrub resistance. The performance advantages provided by Carbowet® GA-210 surfactant extend to a variety of applications where surface tension reduction and wetting combined in a compatible, easy-to-incorporate liquid are desired. Carbowet® GA-210 surfactant offers the most universal and balanced properties suitable for all applications. 收起 | Request Sample |
| Carbowet® GA-211 Surfactant | Evonik Operations GmbH, BL Coating Additives | 作为一种基材润湿剂，Surfynol CT-211 可应用于水性涂料、油墨、胶粘剂和许多其它体系中。用量约为总配方量的0.1～3.0% | Request Sample |
| Carbowet® GA-221 Surfactant | Evonik Operations GmbH, BL Coating Additives | 在颜料碾磨应用中，Surfynol CT-221 可通过对颜料颗粒较好的润湿和碾磨气泡控制来增加展色性。它可在高颜料负载量下提供低粘度和出色的分散稳定性 | Request Sample |
| COLOROL® F | Evonik Operations GmbH, BL Coating Additives | 用于溶剂型体系的润湿和分散添加剂。 | Request Sample |
| Dynol™ 360 Surfactant | Evonik Operations GmbH, BL Coating Additives | 表面活性剂，是一种低起泡超级润湿剂和成膜表面活性剂 | Request Sample |
| Dynol™ 604 Surfactant | Evonik Operations GmbH, BL Coating Additives | 低VOC、低起泡的非离子型润湿助剂，是高性能水性应用的理想选择。该润湿助剂可同时降低静态和动态表面张力至其它表面活性剂无法达到的程度。含100%活性物的液体 | Request Sample |
| Dynol™ 607 Surfactant | Evonik Operations GmbH, BL Coating Additives | Dynol 607表面活性剂，开发用于满足高性能而且经济有效的表面活性剂的增长需求。相比传统表面活性剂如氟表面活性剂和硅，它可为各种水性工业应用提供独特的性能平衡 | Request Sample |
| Dynol™ 800 Surfactant | Evonik Operations GmbH, BL Coating Additives | Dynol™ 800 is a low foam superwetter with exceptional performance in water-based coatings and inks. Dynol™ 800 provides a superior balance of properties compared to traditional fluorosurfactants and silicone surfactants, with exceptional performance in wo...展开 Dynol™ 800 is a low foam superwetter with exceptional performance in water-based coatings and inks. Dynol™ 800 provides a superior balance of properties compared to traditional fluorosurfactants and silicone surfactants, with exceptional performance in wood and plastic coatings as well as a wide variety of other water based coating applications. Dynol™ 800 surfactant has the ability to reduce both equilibrium and dynamic surface tension to levels not achieved with other surfactants. Dynol™ 800 surfactant is an excellent alternative for difficult-to-wet substrates requiring good flow and leveling under diverse application conditions. 收起 | Request Sample |
| Dynol™ 810 Surfactant | Evonik Operations GmbH, BL Coating Additives | Dynol™ 810 is a low foam superwetter with exceptional performance in water-based inks and coatings. Dynol™ 810 provides a superior balance of properties compared to traditional fluorosurfactants and silicone surfactants, with exceptional performance in wo...展开 Dynol™ 810 is a low foam superwetter with exceptional performance in water-based inks and coatings. Dynol™ 810 provides a superior balance of properties compared to traditional fluorosurfactants and silicone surfactants, with exceptional performance in wood and plastic coatings as well as a wide variety of other water based coating applications. Dynol™ 810 surfactant has the ability to reduce both equilibrium and dynamic surface tension to levels not achieved with other surfactants. Dynol™ 810 surfactant is an excellent alternative for difficult-to-wet substrates requiring good flow and leveling under diverse application conditions. 收起 | Request Sample |
| EcoFlame APP201 | Unibrom Corp. | EcoFlame APP201 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP201 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP201 has a molecular weight of n>1000, a pH value of 5.5 to 7.0, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP202 | Unibrom Corp. | EcoFlame APP202 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP202 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP202 can also be used in favorably in intumescent coating for exterior applications where the ammonium polyphosphate is essential to have tremendously low water solubility, in cellulose-containing materials (car’s fireproof cloth, military cellulose materials, paper, and wood), and in numerous polymers for exterior applications. It has a molecular weight of n>1000, a pH value of 6.5 to 7.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP203 | Unibrom Corp. | EcoFlame APP203 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP203 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP203 is also appropriate as acid donor for intumescent coatings and PU foams. It has a molecular weight of n>1000, a pH value of 7.5 to 8.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP204 | Unibrom Corp. | EcoFlame APP204 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP204 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP204 can be also be favorably used in solvent radical intumescent coatings and in thermoplastics. It has a molecular weight of n>1000, a pH value of 6.5 to 7.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP205 | Unibrom Corp. | EcoFlame APP205 is a white fine particle ammonium polyphosphate that is used in a range of polyethylene, polyolefin blends, thermoplastics, polypropylene, ethylene/vinyl acetate copolymers, coating compounds, hot melt adhesives, and is suitable for both i...展开 EcoFlame APP205 is a white fine particle ammonium polyphosphate that is used in a range of polyethylene, polyolefin blends, thermoplastics, polypropylene, ethylene/vinyl acetate copolymers, coating compounds, hot melt adhesives, and is suitable for both injection molding and extrusion applications. EcoFlame APP205 has a molecular weight of n>1000, a pH value of 6.0 to 8.5, a density of 1.8 kg/L at 25°C, an apparent density of 0.45 kg/L, and an average particle size equal to or less than 16 um. 收起 | |
| EcoFlame B-543 | Unibrom Corp. | EcoFlame B-543, a white powder with the chemical name of Tetrabromobisphenol A, is a brominated aromatic flame retardant used in thermoset and thermoplastic resin systems and generally used in the manufacture of flame retardant printed circuit boards, fou...展开 EcoFlame B-543, a white powder with the chemical name of Tetrabromobisphenol A, is a brominated aromatic flame retardant used in thermoset and thermoplastic resin systems and generally used in the manufacture of flame retardant printed circuit boards, found in most electrical appliances. It is also used as an intermediate, to make other flame retardants, and brominated carbon/carbonate oligomers (that use TBBA as a raw material) are used to flame retard thermoplastic resin systems such as certain grades of polycarbonate (PC) and polybutylene terephthalate (PBT). EcoFlame B-543 has a molecular weight of 543.7, a moisture percent of 0.2 max, a melting point of 179 min, and an organic bromide of 58 min. 收起 | |
| EcoFlame B-641 | Unibrom Corp. | EcoFlame B-641, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum...展开 EcoFlame B-641, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum effect on polymer physical properties and lower loading, and is also recommended for styrene based systems such as extruded and expanded polystyrene foams. EcoFlame B-641 has a molecular weight of 641.7, a bromine content of 74% min, a melting point of 180 min, particle size of 95% with 80 mesh passed, and a purity of 99% min. 收起 | |
| EcoFlame B-641TC | Unibrom Corp. | EcoFlame B-641TC, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minim...展开 EcoFlame B-641TC, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum effect on polymer physical properties and lower loading, and is tailor-made for coating and textile fields with disperse-ability and flow-ability. EcoFlame B-641TC has a varying particle size of 1-2, 3-5, and 7-13, it also has a molecular weight of 641.7, a bromine content of 74% min, a melting point of 180 min, and a purity of 99% min. 收起 | |
| EcoFlame B-680 | Unibrom Corp. | EcoFlame B-680, a white to off-white crystalline powder/granular form with the chemical name of 1,2 –bis (2,4,6-tribromophenoxy)ethane, is a flame retardant of ABS, elastomers, textiles, unsaturated polyesters, HIPS, Polycarbonate, adhesives, thermoplasti...展开 EcoFlame B-680, a white to off-white crystalline powder/granular form with the chemical name of 1,2 –bis (2,4,6-tribromophenoxy)ethane, is a flame retardant of ABS, elastomers, textiles, unsaturated polyesters, HIPS, Polycarbonate, adhesives, thermoplastic, and coatings. It is especially efficient for applications in which thermal stability at high processing temperatures is important. EcoFlame B-680 has a molecular weight of 688, a melting point of 220 min, and bromine of 70 min. 收起 | |
| EcoFlame B-959 | Unibrom Corp. | EcoFlame B-959, a white powder with the chemical name of decabromodiphenyl oxide, is a flame retardant additive that offers a solution to flame retardant formulations in a wide range of applications and with bromine content. It is used in wire & cable, bu...展开 EcoFlame B-959, a white powder with the chemical name of decabromodiphenyl oxide, is a flame retardant additive that offers a solution to flame retardant formulations in a wide range of applications and with bromine content. It is used in wire & cable, business machines and television cabinet formulations, elastomers, and is predominantly effective in styrenic, HIPS, polyester resins, polyamide, and polyolefins. EcoFlame B-959 is available with an average particle size of 3 um max or 6 um max, a melting point of 300 min (for the 3 um particle size) and 304.4 to 309.7 min (for the 6 um max particle size, iron content of 10 mg/kg max, an organic bromide of 82% min, a molecular weight of 959.2, and an aluminum content of 30 mg/kg max. 收起 | |
| Enamel Grade Titanium Dioxide HTD-E | Hoten Chemical International Group | Enamel Grade Titanium Dioxide HTD-E is a white powder made from a sulfuric acid process. This product has a strong opacity making a thin, smooth and acid resistant coating used in enamel and coloring material. | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| HTM-A Barium Sulphate Modified | Hoten Chemical International Group | HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 |
