| Amorphic™ A450 | Bunge Amorphic Solutions, LLC. | Amorphic™ A450 is an engineered aluminum phosphate complex designed for general purpose corrosion control. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechan...展开 Amorphic™ A450 is an engineered aluminum phosphate complex designed for general purpose corrosion control. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is often used in interior, exterior, and marine applications. 收起 | |
| Amorphic™ A950 | Bunge Amorphic Solutions, LLC. | Amorphic™ A950 is an engineered aluminum phosphate complex designed to extend the service life of protective coatings in critical service applications in interior, exterior, and marine environments. This product provides a balance of anodic passivation, d...展开 Amorphic™ A950 is an engineered aluminum phosphate complex designed to extend the service life of protective coatings in critical service applications in interior, exterior, and marine environments. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is often used in coatings and high performance binder systems. 收起 | |
| Amorphic™ C120 | Bunge Amorphic Solutions, LLC. | Amorphic™ C120 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechan...展开 Amorphic™ C120 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is used in decorative and general purpose paints and coatings, polyester coil primer and topcoat, and automotive refinish primer. 收起 | |
| Amorphic™ I200 | Bunge Amorphic Solutions, LLC. | Amorphic™ I200 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechan...展开 Amorphic™ I200 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is used in decorative and general purpose paints and coatings, polyester coil primer and topcoat, and automotive refinish primer. 收起 | |
| Amorphic™ I700 | Bunge Amorphic Solutions, LLC. | Amorphic™ I700 is a general purpose corrosion inhibitor that maximizes water absorption and minimizes water diffusion through coating films. This product can be used as an alternative to chrome pigments, and is also used in coil coating, automotive OEM, a...展开 Amorphic™ I700 is a general purpose corrosion inhibitor that maximizes water absorption and minimizes water diffusion through coating films. This product can be used as an alternative to chrome pigments, and is also used in coil coating, automotive OEM, and refinish applications. 收起 | |
| DEXICRYL 036B | DEX-VIN POLYMERS PVT LTD | DEXICRYL 036B is a vinyl acetate-butyl acrylate copolymer emulsion. This product appears as a milky white, free-flowing dispersion. It can be used in highly pigmented interior and exterior emulsion paints. | |
| DEXICRYL 0590D | DEX-VIN POLYMERS PVT LTD | DEXICRYL 0590D is an aqueous dispersion of a styrene acrylic copolymer. This product has a high binding power, which allows it to be used in primer formulations, liquid membranes, textured finishes, and sealants. It can be used in building adhesives and...展开 DEXICRYL 0590D is an aqueous dispersion of a styrene acrylic copolymer. This product has a high binding power, which allows it to be used in primer formulations, liquid membranes, textured finishes, and sealants. It can be used in building adhesives and primers as well. 收起 | |
| DEXICRYL 0591D | DEX-VIN POLYMERS PVT LTD | DEXICRYL 0591D is an aqueous dispersion of an acrylic ester-styrene copolymer. This product's high binding power makes it suitable for use in manufacturing primers, liquid membranes, textured finishes, and sealants. It can also be used in tile adhesives...展开 DEXICRYL 0591D is an aqueous dispersion of an acrylic ester-styrene copolymer. This product's high binding power makes it suitable for use in manufacturing primers, liquid membranes, textured finishes, and sealants. It can also be used in tile adhesives and panel adhesives. 收起 | |
| DEXICRYL 07V03 H (Hard) | DEX-VIN POLYMERS PVT LTD | DEXICRL 07V03 H (Hard) is an aqueous dispersion of a VAM VEOVA 10 copolymer. This product's high binding power makes it suitable for the manufacture of primers, textured finishes and sealants. It can be used to make building adhesives, such as tile or p...展开 DEXICRL 07V03 H (Hard) is an aqueous dispersion of a VAM VEOVA 10 copolymer. This product's high binding power makes it suitable for the manufacture of primers, textured finishes and sealants. It can be used to make building adhesives, such as tile or panel adhesives. 收起 | |
| DEXICRYL 07V03 S (Soft) | DEX-VIN POLYMERS PVT LTD | DEXICRYL 07V03 S (Soft) is an aqueous dispersion of a VAM VEOVA 10 copolymer. This product's high binding power makes it suitable for the manufacture of primers, textured finishes and sealants. It is primarily used to make building adhesives, such as ti...展开 DEXICRYL 07V03 S (Soft) is an aqueous dispersion of a VAM VEOVA 10 copolymer. This product's high binding power makes it suitable for the manufacture of primers, textured finishes and sealants. It is primarily used to make building adhesives, such as tile or panel adhesives. 收起 | |
| DEXICRYL 16V03 | DEX-VIN POLYMERS PVT LTD | DEXICRYL 16V03 is an aqueous dispersion of a VAM VEOVA 10 co-polymer. This product's high binding power makes it suitable for use in the manufacture of primers, textured finishes, and sealants. It is primarily used in building adhesives such as tile or ...展开 DEXICRYL 16V03 is an aqueous dispersion of a VAM VEOVA 10 co-polymer. This product's high binding power makes it suitable for use in the manufacture of primers, textured finishes, and sealants. It is primarily used in building adhesives such as tile or panel adhesives. 收起 | |
| DEXICRYL 3082 | DEX-VIN POLYMERS PVT LTD | DEXICRYL 3082 is a 100% acrylic emulsion with a large particle size. This product appears as a milky white acrylic co-polymer dispersion in water. It can be used in exterior and interior paint applications. DEXICRYL 3082 provides excellent resistance to...展开 DEXICRYL 3082 is a 100% acrylic emulsion with a large particle size. This product appears as a milky white acrylic co-polymer dispersion in water. It can be used in exterior and interior paint applications. DEXICRYL 3082 provides excellent resistance to heat, light, and UV radiation. 收起 | |
| DEXICRYL 3082 LC | DEX-VIN POLYMERS PVT LTD | DEXICRYL 2082 LC is a pure acrylic emulsion with a high molecular weight. This product appears as a bluish wihte acrylic copolymer dispersion in a water solution. It can be used as a binder in cement, in plastic emulsion paints, and acrylic distempers i...展开 DEXICRYL 2082 LC is a pure acrylic emulsion with a high molecular weight. This product appears as a bluish wihte acrylic copolymer dispersion in a water solution. It can be used as a binder in cement, in plastic emulsion paints, and acrylic distempers in order to improve the water-resistance and sheen of the coatings. 收起 | |
| DEXICRYL 492D | DEX-VIN POLYMERS PVT LTD | DEXICRYL 492D is an aqueous dispersion of an acrylic ester-styrene copolymer. This product's high binding power makes it suitable for use in the manufacture of primers, liquid membranes, textured finishes, and sealants. It can also be used in tile and p...展开 DEXICRYL 492D is an aqueous dispersion of an acrylic ester-styrene copolymer. This product's high binding power makes it suitable for use in the manufacture of primers, liquid membranes, textured finishes, and sealants. It can also be used in tile and panel adhesives. 收起 | |
| DEXICRYL CML | DEX-VIN POLYMERS PVT LTD | DEXICRYL CML is an aqueous dispersion of an acrylic ter-polymer. This product provides light stability, weathering, and acid and alkali resistance. It can be used in gloss paints, primers, texture finishes, binders for clear aggregate coatings, and adhe...展开 DEXICRYL CML is an aqueous dispersion of an acrylic ter-polymer. This product provides light stability, weathering, and acid and alkali resistance. It can be used in gloss paints, primers, texture finishes, binders for clear aggregate coatings, and adhesives. 收起 | |
| DEXICRYL D 034 | DEX-VIN POLYMERS PVT LTD | DEXICRYL D 034 is an acrylic-based dispersant. This product appears as a clear to pale yellow liquid. It can be used in clay slurries for paints and paper coatings. It can also be used in textile printings when pigments and fillers are used in preparin...展开 DEXICRYL D 034 is an acrylic-based dispersant. This product appears as a clear to pale yellow liquid. It can be used in clay slurries for paints and paper coatings. It can also be used in textile printings when pigments and fillers are used in preparing printing pastes. 收起 | |
| DEXICRYL EM 3072 | DEX-VIN POLYMERS PVT LTD | DEXICRYL EM 3072 is an acrylic emulsion with a fine particle size. This product appears as a milky white, free-flowing dispersion. It can be used to make interior, exterior and road marking coatings and paints with good alkaline resistance. | |
| DEXICRYL G 301 | DEX-VIN POLYMERS PVT LTD | DEXICRYL G 301 is an ammoniac polyacrylate solution. This product appears as a light yellow, viscous liquid. It can be used as a rheology modifier for plastic emulsion paints. It can also be used in high-gloss and semi-gloss paints in order to improve ...展开 DEXICRYL G 301 is an ammoniac polyacrylate solution. This product appears as a light yellow, viscous liquid. It can be used as a rheology modifier for plastic emulsion paints. It can also be used in high-gloss and semi-gloss paints in order to improve brushability. 收起 | |
| DEXICRYL S 004 | DEX-VIN POLYMERS PVT LTD | DEXICRYL S 004 is an aqueous styrene acrylic copolymer dispersion. This product is designed to modify hydraulic binders. It can be used in flexible coatings and water-resistant two-component mortars. It can also be used to produce crack-filling systems...展开 DEXICRYL S 004 is an aqueous styrene acrylic copolymer dispersion. This product is designed to modify hydraulic binders. It can be used in flexible coatings and water-resistant two-component mortars. It can also be used to produce crack-filling systems and flexible cementitious coatings for walls. 收起 | |
| DEXICRYL TH | DEX-VIN POLYMERS PVT LTD | DEXICRYL TH is a cross-linked acrylic co-polymer dispersion in water. This product appears as a milky white, free-flowing dispersion. It can be used as a thickener in plastic emulsion paints. | |
| DEXIVIN 0553 | DEX-VIN POLYMERS PVT LTD | DEXIVIN 0553 is an externally plasticized PVA emulsion. This product appears as a milky white homopolymer in water. It can be used in paints, and the end product will exhibit good water resistance, hiding and whiteness retention. | |
| DEXIVIN 3025 | DEX-VIN POLYMERS PVT LTD | DEXIVIN 3025 is a vinyl acetate-2-ethylhexyl acrylate copolymer emulsion. This product appears as a milky white, free-flowing dispersion. It can be used as a binder in water-based paints, but has also been developed especially for cement paints. | |
| DEXIVIN 3105 | DEX-VIN POLYMERS PVT LTD | DEXIVIN 3015 is a vinyl acetate and 2-ethylhexyl acrylate copolymer emulsion. This product appears as a milky white, free-flowing dispersion. It can be used as a binder in water-based paints and cement paints. | |
| Dibutyl Phthalate (DBP) | Regar Chemicals Co., Ltd. | Dibutyl Phthalate (DBP) is a transparent, colorless oily liquid used in nitrocellulose and alkyd resin paints. DBP is also an excellent plasticizing agent and used especially PVC, aldolresin and ethyl cellulose. | |
| Diisobutyl Phthalate (DIBP) | Regar Chemicals Co., Ltd. | Diisobutyl Phthalate (DIBP) is a colorless transparent oily liquid used as an alternative to DBP (Dibutyl Phthalate). It is used in nitrocellulose and alkyd resin paints. | |
| Diisononyl Phthalate (DINP) | Regar Chemicals Co., Ltd. | Diisononyl Phthalate (DINP) is a transparent, colorless oily liquid. It can be used as a tensile strength and flexibility enhancing agent for nitrocellulose paints. It has a low volatility, low separability, low migration properties along with high aging ...展开 Diisononyl Phthalate (DINP) is a transparent, colorless oily liquid. It can be used as a tensile strength and flexibility enhancing agent for nitrocellulose paints. It has a low volatility, low separability, low migration properties along with high aging resistance. 收起 | |
| Dioctyl Phthalate(DOP) | Regar Chemicals Co., Ltd. | Dioctyl Phthalate(DOP) is a transparent, colorless oily liquid used to increase the flexibility and tensile strength of nitrocellulose paints. It provides good solubility for many components used in paint and has low volatility, low separability and good ...展开 Dioctyl Phthalate(DOP) is a transparent, colorless oily liquid used to increase the flexibility and tensile strength of nitrocellulose paints. It provides good solubility for many components used in paint and has low volatility, low separability and good conductance properties. 收起 | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| Fumaric Acid Technical Grade | Regar Chemicals Co., Ltd. | Fumaric Acid Technical Grade is a cream-white crystalline powder with a melting point of 285 °C / 545 °F. It is mainly used in production of unsaturated polyester resins, coatings, L-Aspartic Acid, Malic Acid and many auxiliaries. | |
| Kancide 6902 | Kimberlite Chemicals (India) Pvt. Ltd. | Kancide 6902 is an isothiozolinone based biocide that is used to preserve the wet state of aqueous formaldehyde-sensitive formulations. It is a colorless to pale yellow liquid in appearance with a mild odor. This product is VOC free and designed to provid...展开 Kancide 6902 is an isothiozolinone based biocide that is used to preserve the wet state of aqueous formaldehyde-sensitive formulations. It is a colorless to pale yellow liquid in appearance with a mild odor. This product is VOC free and designed to provide a broad activity spectrum against bacteria, yeast and molds in applications such as paints, polymer emulsions, adhesives, ceramic glazes, fillers, and sealants. 收起 | |
| Kancide 6992 | Kimberlite Chemicals (India) Pvt. Ltd. | Kancide 6992 is a colorless to pale yellow liquid in appearance with a mild odor that is used to preserve the wet state of aqueous formaldehyde-sensitive formulations. This product is designed to be used in applications such as paints, polymer emulsions, ...展开 Kancide 6992 is a colorless to pale yellow liquid in appearance with a mild odor that is used to preserve the wet state of aqueous formaldehyde-sensitive formulations. This product is designed to be used in applications such as paints, polymer emulsions, adhesives, ceramic glazes, fillers, and sealants. 收起 | |
| Kanflow 35 | Kimberlite Chemicals (India) Pvt. Ltd. | Kanflow 35 is a highly effective poly carboxylic acid pigment dispersant that is used to provide color acceptance, high reproducibility, heat stability, and a low mill base viscosity. This product is anionic, colorless to light yellow in appearance, and i...展开 Kanflow 35 is a highly effective poly carboxylic acid pigment dispersant that is used to provide color acceptance, high reproducibility, heat stability, and a low mill base viscosity. This product is anionic, colorless to light yellow in appearance, and is often used in water-based paints and coatings. 收起 | |
| Kanflow 45 | Kimberlite Chemicals (India) Pvt. Ltd. | Kanflow 45 is a highly effective poly carboxylic acid pigment dispersant that is used to provide color acceptance, high reproducibility, heat stability, and a low mill base viscosity. This product is anionic, colorless to light yellow in appearance, and i...展开 Kanflow 45 is a highly effective poly carboxylic acid pigment dispersant that is used to provide color acceptance, high reproducibility, heat stability, and a low mill base viscosity. This product is anionic, colorless to light yellow in appearance, and is often used in water-based and semi gloss paints and coatings. 收起 | |
| Kanflow 55 | Kimberlite Chemicals (India) Pvt. Ltd. | Kanflow 55 is a low-foaming poly carboxylic acid pigment dispersant that is used to disperse inorganic pigments and extenders in aqueous systems and prevent pigment flocculation. This product is anionic, colorless to light yellow in appearance, and is oft...展开 Kanflow 55 is a low-foaming poly carboxylic acid pigment dispersant that is used to disperse inorganic pigments and extenders in aqueous systems and prevent pigment flocculation. This product is anionic, colorless to light yellow in appearance, and is often used in flat to semi gloss paints and coatings. 收起 | |
| LIOCRYL AM 432 | Synthopol Chemie Germany | LIOCRYL AM 432 is an aqueous, solvent- and plasticizer-free pure acrylic emulsion with a fine particle size. It is particularly suitable for the formulation of primer coats with good wet adhesion. It is a pure acrylic emulsion for use in pigmented matte a...展开 LIOCRYL AM 432 is an aqueous, solvent- and plasticizer-free pure acrylic emulsion with a fine particle size. It is particularly suitable for the formulation of primer coats with good wet adhesion. It is a pure acrylic emulsion for use in pigmented matte and silk interior and exterior paints. The binder may be used as an adherend surface for substrates which are difficult to wet (terrazzo tiles), by itself or mixed with cement. It is alkali-stable and displays increased water stability and very good wet adhesion. It possesses shear stability and good stamp adhesion. Completely consolidated films of the binder display good tensile strength and elasticity. 收起 | |
| LIOCRYL AM 483 | Synthopol Chemie Germany | LIOCRYL AM 483 is an aqueous pure acrylic emulsion that is solvent and plasticizer free. It is a melamine oder polyisocyanate crosslinkable pure acrylic emulsion, neutralized with DMEA. The emulsion is preserved for storage and contains no formaldehyde or...展开 LIOCRYL AM 483 is an aqueous pure acrylic emulsion that is solvent and plasticizer free. It is a melamine oder polyisocyanate crosslinkable pure acrylic emulsion, neutralized with DMEA. The emulsion is preserved for storage and contains no formaldehyde or formaldehyde-releasing products. 收起 | |
| LIOCRYL AM 900 | Synthopol Chemie Germany | LIOCRYL AM 900 is an aqueous modified pure acrylic emulsion. It is particularly suitable for formulations for clear coats, varnishes and glossy paints for indoors and outdoors. It is miscible in all proportions with suitable polyurethane dispersions. Afte...展开 LIOCRYL AM 900 is an aqueous modified pure acrylic emulsion. It is particularly suitable for formulations for clear coats, varnishes and glossy paints for indoors and outdoors. It is miscible in all proportions with suitable polyurethane dispersions. After drying, the film has a good hardness and blocking resistance despite the low MFFT. It has an extremely high light and water resistance as well as adhesion even when exposed to large amounts of water on substrates such as glass, metal, and wood. 收起 | |
| LIOCRYL AM 903 | Synthopol Chemie Germany | LIOCRYL AM 903 is an aqueous modified pure acrylic emulsion. It is particularly suitable for formulations for clear coats, varnishes and glossy paints for indoors and outdoors. It is miscible in all proportions with suitable polyurethane dispersions. The ...展开 LIOCRYL AM 903 is an aqueous modified pure acrylic emulsion. It is particularly suitable for formulations for clear coats, varnishes and glossy paints for indoors and outdoors. It is miscible in all proportions with suitable polyurethane dispersions. The emulsion is preserved for storage and contains no formaldehyde or formaldehyde-releasing products. LIOCRYL AM 903 contains no alkyl phenol ethoxylates (APEO's). 收起 | |
| LIOCRYL AM 907 | Synthopol Chemie Germany | LIOCRYL AM 907 is an aqueous, self-crosslinking pure acrylic emulsion. It has a fine particle size and is solvent- and plasticizer-free. This pure acrylic emulsion is recommended for use in solvent-free interior and exterior coatings. The product is disti...展开 LIOCRYL AM 907 is an aqueous, self-crosslinking pure acrylic emulsion. It has a fine particle size and is solvent- and plasticizer-free. This pure acrylic emulsion is recommended for use in solvent-free interior and exterior coatings. The product is distinguished by good blocking resistance, good flow and high gloss, and good yellowing resistance. Films of the emulsion are clear, tough and resilient, light resistant, and display good resistance to water, ethanol, and alkali. 收起 | |
| LIOCRYL AM 912 | Synthopol Chemie Germany | LIOCRYL AM 912 is an aqueous pure acrylic emulsion that is solvent- and plasticizer-free. It is a general-purpose emulsion for the manufacture of matte to silk-finish emulsion paints and wood varnishes for interior and exterior coatings. It is distinguish...展开 LIOCRYL AM 912 is an aqueous pure acrylic emulsion that is solvent- and plasticizer-free. It is a general-purpose emulsion for the manufacture of matte to silk-finish emulsion paints and wood varnishes for interior and exterior coatings. It is distinguished by excellent adhesion to old alkyd resin coats exposed to moisture. The glossy paints are characterized by good stability, levelling, resistance to light and blocking resistance. 收起 | |
| LIOCRYL AM 914 | Synthopol Chemie Germany | LIOCRYL AM 914 is an aqueous pure acrylic emulsion that is solvent- and plasticizer-free. It is a very hard pure acrylic emulsion that when blended with Liocryl AM 913 can be used to achieve any hardness, sandability, stackability, and blocking resistance...展开 LIOCRYL AM 914 is an aqueous pure acrylic emulsion that is solvent- and plasticizer-free. It is a very hard pure acrylic emulsion that when blended with Liocryl AM 913 can be used to achieve any hardness, sandability, stackability, and blocking resistance. The emulsion is preserved for storage and contains no formaldehyde or formaldehyde-releasing products. 收起 | |
| LIOCRYL AM 916 | Synthopol Chemie Germany | LIOCRYL AM 916 is an aqueous pure acrylic dispersion that is solvent- and plasticizer-free. It is recommended for sanding sealers in wood coating systems. It is advisable to add 8% butyl glycol for complete film formation at room temperature. The emulsion...展开 LIOCRYL AM 916 is an aqueous pure acrylic dispersion that is solvent- and plasticizer-free. It is recommended for sanding sealers in wood coating systems. It is advisable to add 8% butyl glycol for complete film formation at room temperature. The emulsion is preserved for storage and contains no formaldehyde or formaldehyde-releasing products. 收起 | |
| LIOCRYL AM 920 | Synthopol Chemie Germany | LIOCRYL AM 920 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups and fine particle size. It is solvent- and plasticizer-free. The emulsion is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood paints...展开 LIOCRYL AM 920 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups and fine particle size. It is solvent- and plasticizer-free. The emulsion is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood paints and furniture varnishes. For the purpose of 2 C paints Liocryl AM 920 can be combined with Liopur polyurethane dispersions. The emulsion can be used wherever high chemical resistance, plasticiser resistance and non-yellowing properties are required. 收起 | |
| LIOCRYL AM 921 | Synthopol Chemie Germany | LIOCRYL AM 921 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups and fine particle size. It is solvent- and plasticizer-free. Liocryl AM 921 is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood and ...展开 LIOCRYL AM 921 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups and fine particle size. It is solvent- and plasticizer-free. Liocryl AM 921 is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood and furniture varnishes. Coatings based on Liocryl AM 921 show good grain enhancement on wood. Liocryl AM 921 is an APEO free version of Liocryl AM 920. 收起 | |
| LIOCRYL AM 923 | Synthopol Chemie Germany | LIOCRYL AM 923 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups and fine particle size. It is solvent- and plasticizer-free. This emulsion is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood and f...展开 LIOCRYL AM 923 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups and fine particle size. It is solvent- and plasticizer-free. This emulsion is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood and furniture varnishes. For this purpose it can be combined with Liopur polyurethane dispersions. The emulsion can be used wherever high chemical resistance and yellowing resistance are required. As a result of the fine particle size, excellent transparency in the wet film is obtained together with very good grain enhancement. 收起 | |
| LIOCRYL AM 951 | Synthopol Chemie Germany | LIOCRYL AM 951 is an aqueous, self-crosslinking acrylic emulsion with a fine particle size. It is solvent- and plasticizer-free. This acrylic emulsion is suitable for use in solvent-free or low-solvent coatings. It is distinguished by high blocking resist...展开 LIOCRYL AM 951 is an aqueous, self-crosslinking acrylic emulsion with a fine particle size. It is solvent- and plasticizer-free. This acrylic emulsion is suitable for use in solvent-free or low-solvent coatings. It is distinguished by high blocking resistance and good stability characteristics. 收起 | |
| LIOCRYL AM 955 | Synthopol Chemie Germany | LIOCRYL AM 955 is an aqueous, self-crosslinking pure acrylic emulsion. It is suitable for quick-drying wood coatings for industrial processing affording early stackability. The blocking resistance in accordance with a variety of evaluation methods is very...展开 LIOCRYL AM 955 is an aqueous, self-crosslinking pure acrylic emulsion. It is suitable for quick-drying wood coatings for industrial processing affording early stackability. The blocking resistance in accordance with a variety of evaluation methods is very good. The emulsion is preserved for storage. It contains no solvents or plasticisers and no formaldehyde or formaldehyde-releasing products. The emulsion contains no alkyl phenol ethoxylates (APEO’s). 收起 | |
| LIOCRYL AM 982 | Synthopol Chemie Germany | LIOCRYL AM 982 is an aqueous pure acrylic emulsion. This dispersion is especially recommended for formulating paints for plastics components such as hi-fi cabinets. It offers excellent chemical resistance. The emulsion is preserved for storage, and it con...展开 LIOCRYL AM 982 is an aqueous pure acrylic emulsion. This dispersion is especially recommended for formulating paints for plastics components such as hi-fi cabinets. It offers excellent chemical resistance. The emulsion is preserved for storage, and it contains no plasticisers and no formaldehyde or formaldehyde-releasing products. 收起 | |
| LIOCRYL AS 320 N | Synthopol Chemie Germany | LIOCRYL AS 320 N is an aqueous styrene acrylic emulsion. It is solvent- and plasticizer-free. The emulsion is particularly suitable for production of matt to glossy paints for indoor and outdoor use and for formulations for tile adhesives. The film dries ...展开 LIOCRYL AS 320 N is an aqueous styrene acrylic emulsion. It is solvent- and plasticizer-free. The emulsion is particularly suitable for production of matt to glossy paints for indoor and outdoor use and for formulations for tile adhesives. The film dries above the film formation temperature to give a clear coating, shows little tendency to swell in water and a high saponification resistance. Because of these properties Liocryl AS 320 is expecially suitable for the production of outdoor paints and plastics-bound plasters as well as for impregnating and priming brickwork and sanding plasters. 收起 | |
| LIOCRYL AS 603 | Synthopol Chemie Germany | LIOCRYL AS 603 is an aqueous styrene acrylic emulsion. It is suitable for anti-corrosive primers with good adhesion to metal and for glossy top coats. Combined with Synthalat W 30, very good hybrid paints can be made, with good salt spray resistance and h...展开 LIOCRYL AS 603 is an aqueous styrene acrylic emulsion. It is suitable for anti-corrosive primers with good adhesion to metal and for glossy top coats. Combined with Synthalat W 30, very good hybrid paints can be made, with good salt spray resistance and high gloss. The emulsion is preserved for storage. It contains no formaldehyde or formaldehyde-releasing products. 收起 | |
| LIOCRYL AS 610 | Synthopol Chemie Germany | LIOCRYL AS 610 is an aqueous styrene acrylic emulsion. It is suitable for wood and parquet floor varnishes, particularly in combination with PU dispersions such as LIOPUR 92-091. The emulsion requires solvents for film formation, e.g. 5-6% butylglycol. Co...展开 LIOCRYL AS 610 is an aqueous styrene acrylic emulsion. It is suitable for wood and parquet floor varnishes, particularly in combination with PU dispersions such as LIOPUR 92-091. The emulsion requires solvents for film formation, e.g. 5-6% butylglycol. Combined with PU dispersion LIOPUR 92-091, varnishes can be formulated that meet the requirements for receiving the “blue angel” mark denoting environmentally safe products. The films of AS 610 are clear, hard and have good water resistance, and the necessary abrasion values for parquet floor varnishes (Taber abraser). 收起 | |
| LIOCRYL AS 615 | Synthopol Chemie Germany | LIOCRYL AS 615 is an aqueous styrene acrylic emulsion. It is suitable for use in primers and top coats for metal and other substrates. The emulsion contains no alkylphenol ethoxylates (APEO’s), it is solvent- and plasticizer-free. This product is preserve...展开 LIOCRYL AS 615 is an aqueous styrene acrylic emulsion. It is suitable for use in primers and top coats for metal and other substrates. The emulsion contains no alkylphenol ethoxylates (APEO’s), it is solvent- and plasticizer-free. This product is preserved for storage, and contains no formaldehyde or formaldehyde-releasing products. 收起 | |
| LIOCRYL AS 640 | Synthopol Chemie Germany | LIOCRYL AS 640 is an aqueous hydroxy functional acrylic emulsion that is solvent- and plasticizer-free. It is suitable for the formulation of fast drying aqueous 2-pack top coats with high gloss und good chemical resistance. The emulsion requires the addi...展开 LIOCRYL AS 640 is an aqueous hydroxy functional acrylic emulsion that is solvent- and plasticizer-free. It is suitable for the formulation of fast drying aqueous 2-pack top coats with high gloss und good chemical resistance. The emulsion requires the addition of coalescents for proper film formation The emulsion film can have a slightly structured surface. This phenomenon does not however appear in formulated coatings, therefore the properties of the coatings (such as gloss or transparency) are not adversely affected. 收起 | |
| LIOCRYL AS 680 | Synthopol Chemie Germany | LIOCRYL AS 680 is an aqueous self-crosslinking styrene acrylic emulsion. Blended with special Liopur-PU-dispersions, Liocryl AS 680 is particularly suitable for the formulation of 1C coatings with good abrasion resistance and high hardness. Coatings based...展开 LIOCRYL AS 680 is an aqueous self-crosslinking styrene acrylic emulsion. Blended with special Liopur-PU-dispersions, Liocryl AS 680 is particularly suitable for the formulation of 1C coatings with good abrasion resistance and high hardness. Coatings based on these combinations are distinguished by good chemical resistance against ethanol and plasticiser. Used as a sole binder, Liocryl AS 680 has good adhesion properties on plastics such as polystyrene. The resistance against ethanol and petrol is good. 收起 | |
| Liocryl XAM 2827 | Synthopol Chemie Germany | Liocryl XAM 2827 is a self-crosslinking pure acrylic emulsion with a high crosslinking degree. It is particularly suitable for the formulation of 1C wood coatings especially in combination with appropriate Liopur polyurethane dispersions. The emulsion is ...展开 Liocryl XAM 2827 is a self-crosslinking pure acrylic emulsion with a high crosslinking degree. It is particularly suitable for the formulation of 1C wood coatings especially in combination with appropriate Liopur polyurethane dispersions. The emulsion is preserved for storage. It contains no solvents or plasticisers and no formaldehyde or formaldehyde-releasing products. The emulsion contains no alkyl phenol ethoxylates (APEO’s). 收起 | |
| Liocryl XAM 5134 | Synthopol Chemie Germany | Liocryl XAM 5134 is an aqueous, self-crosslinking pure acrylic emulsion for 1-pack parquet and furniture varnishes. It is free of solvents, plasticisers, formaldehyde and APEOs and stands out with good chemical resistance. | |
| Liocryl XAM 6979 | Synthopol Chemie Germany | Liocryl XAM 6979 is an aqueous, self-crosslinking pure acrylic emulsion. Films of Liocryl XAM 6979 are distinguished by particularly good blocking resistance and, excellent elasticity. Due to its low particle size the emulsion has a good In-can and wet f...展开 Liocryl XAM 6979 is an aqueous, self-crosslinking pure acrylic emulsion. Films of Liocryl XAM 6979 are distinguished by particularly good blocking resistance and, excellent elasticity. Due to its low particle size the emulsion has a good In-can and wet film clarity. 收起 | |
| LIOPTAL 541 | Synthopol Chemie Germany | LIOPTAL 541 is a short-oil alkyd resin modified with phenol resin. Because of its composition, Lioptal 541 is a special-purpose binder for air- and stove-drying primers with very short drying times and excellent overspray tolerance. Through combination wi...展开 LIOPTAL 541 is a short-oil alkyd resin modified with phenol resin. Because of its composition, Lioptal 541 is a special-purpose binder for air- and stove-drying primers with very short drying times and excellent overspray tolerance. Through combination with other short-oil or medium-oil drying alkyd resin, epoxy esters and urea or melamine resins a wide range of possibilities are obtained not only in the primer sector but also for fast-drying industrial coatings. 收起 | |
| LIOPTAL 836 | Synthopol Chemie Germany | LIOPTAL 836 is a short-oil drying alkyd resin. It is suitable for use in air-drying primers, as well as single and top coats. It has good dipping bath stability. The low oil content of Lioptal 836 yields very quick-drying glossy top coats. With forced dry...展开 LIOPTAL 836 is a short-oil drying alkyd resin. It is suitable for use in air-drying primers, as well as single and top coats. It has good dipping bath stability. The low oil content of Lioptal 836 yields very quick-drying glossy top coats. With forced drying, e.g. 30 min / 80°C, very hard films are obt ained within a short period of time. Dipping coatings based on Lioptal 836 have excellent tank stability. The possibility of combining with clorinated vinyl polymers (e.g. Laroflax) is also worth mentioning. 收起 | |
| LIOPTAL A 424 | Synthopol Chemie Germany | LIOPTAL A 424 is a heat-reactive acrylic resin that is cross-linkable with melamine resins. It is suitable for use in combination with melamine resin for stoving finishes with high reactivity, stoving temperatures starting at 100°C. | |
| LIOPTAL A 453 60% | Synthopol Chemie Germany | LIOPTAL A 453 is a heat-reactive acrylic resin that is crosslinkable with melamine resins. It is suitable for use in combination with melamine resin for stoving finishes with excellent weathering and colour stability. This product can be used in stoving c...展开 LIOPTAL A 453 is a heat-reactive acrylic resin that is crosslinkable with melamine resins. It is suitable for use in combination with melamine resin for stoving finishes with excellent weathering and colour stability. This product can be used in stoving conditions 130°C and higher. 收起 | |
| LIOPTAL A 453 65% | Synthopol Chemie Germany | LIOPTAL A 453 is a heat-reactive acrylic resin that is crosslinkable with melamine resins. It is suitable for use in combination with melamine resin for stoving finishes with excellent weathering and colour stability. Stoving conditions for this product a...展开 LIOPTAL A 453 is a heat-reactive acrylic resin that is crosslinkable with melamine resins. It is suitable for use in combination with melamine resin for stoving finishes with excellent weathering and colour stability. Stoving conditions for this product are 130°C and higher. 收起 | |
| LIOPTAL A 470 | Synthopol Chemie Germany | LIOPTAL A 470 is an acrylic resin that is crosslinkable with melamine resins. It is recommended for stove-drying top coats in combination with melamine resins. | |
| LIOPTAL A 471 | Synthopol Chemie Germany | LIOPTAL A 471 is a heat-reactive high-solids acrylic resin that is curable with amino resins or blocked polyisocyanates. It can be combined with blocked polyisocyanates or melamine resins, stoved finishes with high flexibility, colour stability and weathe...展开 LIOPTAL A 471 is a heat-reactive high-solids acrylic resin that is curable with amino resins or blocked polyisocyanates. It can be combined with blocked polyisocyanates or melamine resins, stoved finishes with high flexibility, colour stability and weathering resistance. It is suitable for stoving conditions above 130°C. This product is esed for metal substrates as a base coat and topcoat for high solid automotive and industrial coatings. 收起 | |
| LIOPTAL B 49 | Synthopol Chemie Germany | LIOPTAL B 49 is a fast-drying medium-oil alkyd resin. It can be used in machine and automotive coatings, radiator paints, industrial coatings and primers, effect coatings, and with melamine resins for 80°C. | |
| LIOPTAL ES 43 | Synthopol Chemie Germany | LIOPTAL ES 43 is a short-oil alkyd resin supplied as 70% in butyl acetate. It can be used in combination with nitrocellulose for wood and metal finishes with rapid solvent evaporation and good resistance to water and alcohol. This product can also be used...展开 LIOPTAL ES 43 is a short-oil alkyd resin supplied as 70% in butyl acetate. It can be used in combination with nitrocellulose for wood and metal finishes with rapid solvent evaporation and good resistance to water and alcohol. This product can also be used in combination with unplasticized urea or melamine resins for stove-drying industrial coatings; 1- and 2-component AC coatings; as the hydroxyl component in PUR coatings. 收起 | |
| LIOPTAL TH 406 | Synthopol Chemie Germany | LIOPTAL TH 406 is a short-oil alkyd resin modified with phenol resin. It is suitable for use in fast-drying anti-corrosive primers and synthetic resin-based paints, shop primers, knife fillers, and stove-drying industrial primers and topcoats. | |
| LIOPUR 2004-140 | Synthopol Chemie Germany | LIOPUR 2004-140 is a solvent free, aqueous, aliphatic polyurethane dispersion based on a special polyester. Films of the dispersion are transparent and tack-free, with sufficient hardness, high flexibility and elasticity. Due to its low minimum film formi...展开 LIOPUR 2004-140 is a solvent free, aqueous, aliphatic polyurethane dispersion based on a special polyester. Films of the dispersion are transparent and tack-free, with sufficient hardness, high flexibility and elasticity. Due to its low minimum film forming temperature, LIOPUR2004-140 does not need any coalescence agent for filmforming at room temperature. Therefore it can be combined with acrylic emulsions with high Tg like LIOCRYL AS 680 and AS 615. 收起 | |
| LIOPUR 2004-422 | Synthopol Chemie Germany | LIOPUR 2004-422 is an aqueous, self-crosslinking aromatic urethane acrylic emulsion. Films of the dispersion are transparent and tack-free, with high hardness, flexibility and elasticity. Films based on LIOPUR 2004-422 display very good water resistance a...展开 LIOPUR 2004-422 is an aqueous, self-crosslinking aromatic urethane acrylic emulsion. Films of the dispersion are transparent and tack-free, with high hardness, flexibility and elasticity. Films based on LIOPUR 2004-422 display very good water resistance and good resistance to ethanol. LIOPUR 2004-422 is recommended for waterbased 1C-wood lacquers with high hardness, good taber abraison and very good chemical resistance. 收起 | |
| LIOPUR 2005-380 | Synthopol Chemie Germany | LIOPUR 2005-380 is a surfactant-free aqueous aliphatic polyurethane dispersion. Coatings based on LIOPUR 2005-380 form tack-free, transparent films with very good surface hardness and scratch resistance after air drying. LIOPUR 2005-380 is suitable for 1C...展开 LIOPUR 2005-380 is a surfactant-free aqueous aliphatic polyurethane dispersion. Coatings based on LIOPUR 2005-380 form tack-free, transparent films with very good surface hardness and scratch resistance after air drying. LIOPUR 2005-380 is suitable for 1C wood lacquers which early sanding properties and good grain enhencement on pale wood, especially oak. Lacquers based on LIOPUR 2005-380 also exhibit a good recoatibility. 收起 | |
| LIOPUR PFL 1130 | Synthopol Chemie Germany | LIOPUR PFL 1130 is an emulsifier-free, oil-modified aliphatic polyurethane dispersion. After air-drying, film coatings based on LIOPUR PFL 1130/30% form transparent films which are tack-free and exhibit very good surface hardness and scratch resistance. L...展开 LIOPUR PFL 1130 is an emulsifier-free, oil-modified aliphatic polyurethane dispersion. After air-drying, film coatings based on LIOPUR PFL 1130/30% form transparent films which are tack-free and exhibit very good surface hardness and scratch resistance. LIOPUR PFL 1130/30% is suitable for the formulation of 1-pack wood paints which are sandable after one to two hours. LIOPUR PFL 1130/30% as sole binder and in combination with acrylate dispersions possess excellent chemical resistance and good abrasion resistance. 收起 | |
| LIOPUR PFL 1154 | Synthopol Chemie Germany | LIOPUR PFL 1154 is an aqueous, aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. After air-drying, film coatings based on LIOPUR PFL 1154 transparent films which are tack-free and exhibit good surface hardness. LIOPUR PFL 1...展开 LIOPUR PFL 1154 is an aqueous, aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. After air-drying, film coatings based on LIOPUR PFL 1154 transparent films which are tack-free and exhibit good surface hardness. LIOPUR PFL 1154 needs a small amount of appr 2-3 % butylglycol for film formation. Films based on LIOPUR PFL 1154 are distinguished by high toughness and resilience and tear strength. Owing to its very high abrasion resistance and its excellent chemical resistance, LIOPUR PFL 1154 can be used in combination with water-emulsifiable polyisocyanates for airdrying, aqueous, 2-pack parquet floor varnishes. Compared with other 2-pack dispersions, LIOPUR PFL 1154 is distinguished by good grain enhancement of the wood for water-thinnable formulations. 收起 | |
| LIOPUR PFL 1263 | Synthopol Chemie Germany | LIOPUR PFL 1263 is an emulsifier-free, aqueous, aliphatic polyurethane dispersion based on polyester. Films of the dispersion are transparent and slightly tacky with excellent flexibility and elasticity. Coatings based on LiopurPFL 1263 have the following...展开 LIOPUR PFL 1263 is an emulsifier-free, aqueous, aliphatic polyurethane dispersion based on polyester. Films of the dispersion are transparent and slightly tacky with excellent flexibility and elasticity. Coatings based on LiopurPFL 1263 have the following Zwick material testing characteristics after 4 days drying at room temperature (initial force 1 N, testing speed 100 mm/min): Tear strength approximately 1 N/mm^2, and elongation at break approximately 700%. 收起 | |
| LIOPUR PFL 1284 | Synthopol Chemie Germany | LIOPUR PFL 1284 is an aqueous solvent-free aliphatic polyurethane dispersion based on a special polyester combination. Coatings based on Liopur PFL 1284 form tack-free, transparent films with very good surface hardness after air drying, high flexibility a...展开 LIOPUR PFL 1284 is an aqueous solvent-free aliphatic polyurethane dispersion based on a special polyester combination. Coatings based on Liopur PFL 1284 form tack-free, transparent films with very good surface hardness after air drying, high flexibility and elasticity. These coatings exhibit a very good water resistance and good ethanol resistance. 收起 | |
| LIOPUR PFL 1908 | Synthopol Chemie Germany | LIOPUR PFL 1908 is an aqueous, solvent-free, aliphatic polyurethane dispersion based on a polycarbonate. After air-drying, film coatings based on LIOPUR PFL1908 and more than 15 % butylglycole form transparent films which are tack-free and display good su...展开 LIOPUR PFL 1908 is an aqueous, solvent-free, aliphatic polyurethane dispersion based on a polycarbonate. After air-drying, film coatings based on LIOPUR PFL1908 and more than 15 % butylglycole form transparent films which are tack-free and display good surface resistance, high flexibility and elasticity. This product shows a good wet and dry appearance on wood. 收起 | |
| LIOPUR PFL 1964 | Synthopol Chemie Germany | LIOPUR PFL 1964 is an aqueous, aliphatic polyurethane dispersion based on a polycarbonate. After air-drying, film coatings based on Liopur PFL 1964 form soft and elastics films. Liopur PFL 1964 is suitable as a sole binder and in combination with elastic ...展开 LIOPUR PFL 1964 is an aqueous, aliphatic polyurethane dispersion based on a polycarbonate. After air-drying, film coatings based on Liopur PFL 1964 form soft and elastics films. Liopur PFL 1964 is suitable as a sole binder and in combination with elastic hydroxy-polyesters or polyurethane dispersions as 2-pack system for soft-feeling and decor paints. As combination partner the polyurethane dispersion Liopur PFL 1953 based on a polyester is recommended in order to find the right balance between price and performance. 收起 | |
| LIOPUR PFL 2146 | Synthopol Chemie Germany | LIOPUR PFL 2146 is an aqueous aliphatic polyurethane dispersion based on an oleochemical polyester. It does not need any cosolvents for film formation. Coatings based on LIOPUR 2146 form tack-free, transparent films with medium surface hardness after air ...展开 LIOPUR PFL 2146 is an aqueous aliphatic polyurethane dispersion based on an oleochemical polyester. It does not need any cosolvents for film formation. Coatings based on LIOPUR 2146 form tack-free, transparent films with medium surface hardness after air drying with good flexibility and elasticity. 收起 | |
| LIOPUR PFL 2315 | Synthopol Chemie Germany | LIOPUR PFL 2315 is an aqueous, aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. It is solvent- and TEA-free. After air-drying, film coatings based on LIOPUR PFL 2315 form transparent films which are tack-free and exhibit g...展开 LIOPUR PFL 2315 is an aqueous, aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. It is solvent- and TEA-free. After air-drying, film coatings based on LIOPUR PFL 2315 form transparent films which are tack-free and exhibit good surface hardness. Films based on LIOPUR PFL 2315 are distinguished by high toughness and resilience and tear strength. Owing to its very high abrasion resistance and its excellent chemical resistance, LIOPUR PFL 2315 can be used in combination with water-emulsifiable polyisocyanates for air drying, aqueous, 2-pack parquet floor varnishes. Compared with other 2-pack dispersions, LIOPUR PFL 2315 is distinguished by good grain enhancement of the wood for water-thinnable formulations. 收起 | |
| LIOPUR PFL 2323 | Synthopol Chemie Germany | LIOPUR PFL 2323 is an aqueous, solvent-free aliphatic polyurethane dispersion based on a special castor oil modified polyester combination. The polymer contains approximately 30% based on renewable raw materials. LIOPUR PFL2323 needs an amount of appr 4 %...展开 LIOPUR PFL 2323 is an aqueous, solvent-free aliphatic polyurethane dispersion based on a special castor oil modified polyester combination. The polymer contains approximately 30% based on renewable raw materials. LIOPUR PFL2323 needs an amount of appr 4 % butylglycol for film formation. Coatings based on LIOPUR PFL2323 form tack-free, transparent films with good surface hardness after air drying. These coatings exhibit a very good water resistance and for polyurethane dispersions excellent ethanol resistance. 收起 | |
| LIOPUR PFL 2366 | Synthopol Chemie Germany | LIOPUR PFL 2366 is an aqueous, aliphatic modified polyurethane dispersion based on a polyester. It is free of solvents, TEA, and surfactants. After air-drying, film coatings based on LIOPUR PFL 2366 and 5 % butylglycole form transparent films which are ta...展开 LIOPUR PFL 2366 is an aqueous, aliphatic modified polyurethane dispersion based on a polyester. It is free of solvents, TEA, and surfactants. After air-drying, film coatings based on LIOPUR PFL 2366 and 5 % butylglycole form transparent films which are tack-free and display good surface resistance of appr. 120 sec Pendulum hardness after König (90 μm wet film after 24 h drying at room temperature). LIOPUR PFL 2366 is suitable as a sole binder in the formulation of solventpoor air-drying 1-pack parquet flooring and furniture varnishes owing to sufficient chemical resistance 收起 | |
| LIOPUR PFL 2392 | Synthopol Chemie Germany | LIOPUR PFL 2392 is an aqueous, aliphatic modified polyurethane dispersion based on a polyester. It is free of solvents, TEA, and surfactants. It exhibits good flexibility and elasticity. LIOPUR PFL 2392 is designed for waterbased 1C basecoats with good hu...展开 LIOPUR PFL 2392 is an aqueous, aliphatic modified polyurethane dispersion based on a polyester. It is free of solvents, TEA, and surfactants. It exhibits good flexibility and elasticity. LIOPUR PFL 2392 is designed for waterbased 1C basecoats with good humidity resistance and good adhesion to different plastics due to the hydrophobic polymer character and its good intercoat adhesion to conventional 2C topcoats. 收起 | |
| LIOPUR PFL 2634 | Synthopol Chemie Germany | LIOPUR PFL 2634 is an aliphatic hydroxyl group containing polyurethane dispersion, stabilized with DMEA. Coatings based on LIOPUR PFL 2634 form tack-free, transparent films. It is suitable for 2C glass and plastic lacquers in combination with typical hard...展开 LIOPUR PFL 2634 is an aliphatic hydroxyl group containing polyurethane dispersion, stabilized with DMEA. Coatings based on LIOPUR PFL 2634 form tack-free, transparent films. It is suitable for 2C glass and plastic lacquers in combination with typical hardeners like water dilutable polyisocyanates. Films of these two-component coatings exhibit very high pendulum hardness and excellent light resistance. This product is also suitable for one component stoving enamels in combination with suitable water-dilutable crosslinkers like melamine resins or blocked polyisocyanates. 收起 | |
| LIOPUR PFL 2900 | Synthopol Chemie Germany | LIOPUR PFL 2900 is an aqueous aliphatic polyurethane dispersion based on a polyester from renewable raw materials. Coatings based on LIOPUR PFL 2900 need cosolvents in order to form tack-free, transparent films with very good surface hardness and scratch ...展开 LIOPUR PFL 2900 is an aqueous aliphatic polyurethane dispersion based on a polyester from renewable raw materials. Coatings based on LIOPUR PFL 2900 need cosolvents in order to form tack-free, transparent films with very good surface hardness and scratch resistance after air drying. It is suitable for 1C solventpoor wood and parquet lacquers which early sanding properties and good grain enhencement on pale wood, especially oak. Owing to its oily nature, paints can be made with LIOPUR PFL 2900 which have better high-build characteristics than conventional dispersions. 收起 | |
| LIOPUR PFL 2966 | Synthopol Chemie Germany | LIOPUR PFL 2966 is an aqueous, aliphatic polyurethane dispersion based on a polyester. It is amine- and ammonia free. This product is suitable as a sole binder and in combination with other elastic polyurethane dispersions as 2-pack system for plastic coa...展开 LIOPUR PFL 2966 is an aqueous, aliphatic polyurethane dispersion based on a polyester. It is amine- and ammonia free. This product is suitable as a sole binder and in combination with other elastic polyurethane dispersions as 2-pack system for plastic coatings with excellent haptic, crockmeter-resistance and resistance to hydrolysis. LIOPUR PFL 1964 based on polycarbonate is recommended as combination partner to improve resistance to hydrolysis. 收起 | |
| LIOPUR PFL 3046 | Synthopol Chemie Germany | LIOPUR PFL 3046 is an aqueous aliphatic polyurethane dispersion based on an oleochemical polyester. It is surfactant- and TEA-free. This product does not need any amount of cosolvents for film formation. Coatings based on LIOPUR PFL 3046 form tack-free, t...展开 LIOPUR PFL 3046 is an aqueous aliphatic polyurethane dispersion based on an oleochemical polyester. It is surfactant- and TEA-free. This product does not need any amount of cosolvents for film formation. Coatings based on LIOPUR PFL 3046 form tack-free, transparent films with medium surface hardness after air drying with good flexibility and elasticity. LIOPUR PFL 3046 exhibits very good water resistance and good ethanol resistance. The dispersion is recommended for combination with Liocryl acrylic emulsions. 收起 |
