| A-C 316A | DKSH | A-C 316A is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer, in finer powder form than A C 316, for use in waterborne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including ...展开 A-C 316A is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer, in finer powder form than A C 316, for use in waterborne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, helping to extend cutting machine lifetime. Its acid number of 16 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). In addition, may be used as a metal release agent for PVC processing and is a fusion control for PVC formulations. It will not affect clarity in transparent PVC applications. Very effective for use in processing PVC regrind. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 325 | DKSH | A-C 325 is a Hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion re...展开 A-C 325 is a Hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number of 25 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 400 | DKSH | A-C 400 is a Ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing appl...展开 A-C 400 is a Ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing application viscosity at melt, while providing an adhesion boost versus homopolymer, non functional diluents (FT, byproduct, thermally degraded (TD) and PE homopolymer waxes). It is completely miscible in EVA adhesive resins, as would be expected by the similar chemistry. It is also used in candles to provide paraffin crystal nucleation, which increases thermal and breakage resistance, adhesion to glass, and fragrance retention. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 400A | DKSH | A-C 400A is a Ethylene vinyl acetate (EVA) copolymer in powder form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing ap...展开 A-C 400A is a Ethylene vinyl acetate (EVA) copolymer in powder form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing application viscosity at melt, while providing an adhesion boost versus homopolymer, non functional diluents (FT, byproduct, thermally degraded (TD) and PE homopolymer waxes). It is completely miscible in EVA adhesive resins, as would be expected by the similar chemistry. It is also used in candles to provide paraffin crystal nucleation, which raises thermal and breakage resistance, adhesion to glass, and fragrance retention. Is also a dispersing agent for color masterbatch in stryenic resins. Excellent dispersing agent and process aid for EVA-based wire and cable compounds. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 405M | DKSH | A-C 405M is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 8%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available...展开 A-C 405M is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 8%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 405T | DKSH | A-C 405T is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 6%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available...展开 A-C 405T is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 6%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 540 | DKSH | A-C 540 is an ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficien...展开 A-C 540 is an ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 540A | DKSH | A-C 540A is a Ethylene acrylic acid (EAA) copolymer in a powdered form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coeffic...展开 A-C 540A is a Ethylene acrylic acid (EAA) copolymer in a powdered form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Is a dispersing agent for color masterbatch in engineering resins. Excellent external lubricant for polyamide compounds.This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 6 | DKSH | A-C 6 is a low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as...展开 A-C 6 is a low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 617 | DKSH | A-C 617 is a Low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used ...展开 A-C 617 is a Low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Is used as a dispersing agent in color masterbatch applications. In PVC applications it finds use as an external lubricant. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 617A | DKSH | A-C 617A is a low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also u...展开 A-C 617A is a low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. In PVC applications it finds use as an external lubricant. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 629 | DKSH | A-C 629 is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It can also be atmospherically emulsified for use in aqueous appli...展开 A-C 629 is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 629A | DKSH | A-C 629A is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It is a pigment dispersing agent for color masterbatch. It can al...展开 A-C 629A is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It is a pigment dispersing agent for color masterbatch. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 6A | DKSH | A-C 6A is a low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also use...展开 A-C 6A is a low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Is used as a dispersing agent in color masterbatch applications.This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| AAEM | DKSH | AAEM is a methacrylic monomer used to formulate highsolids solution acrylic resins and acrylic emulsions for lower VOC emission industrial and architectural coatings. The ability of AAEM to react with amines and hydrazides makes it an ideal monomer for se...展开 AAEM is a methacrylic monomer used to formulate highsolids solution acrylic resins and acrylic emulsions for lower VOC emission industrial and architectural coatings. The ability of AAEM to react with amines and hydrazides makes it an ideal monomer for self-crosslinkable, room temperature cure acrylic emulsions. It also finds use in acetoacetylated polymers crosslinked through chelation with metal ions and for acetoacetylated polymers for producing colorfast fibers (azo-dye). AAEM readily polymerizes with other acrylic and methacrylic monomers. Chemical name: Acetoacetoxyethyl Methacrylate. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| ACQUAMINE PD 1419_7 | DKSH | ACQUAMINE PD 1419_7 is a waterborne cycloaliphatic amine adduct epoxy curing agent designed to cure both epoxy resin emulsions and standard epoxy resins. | Request Sample |
| ACQUAMINE PD 2157_2 | DKSH | ACQUAMINE PD 2157_2 is a waterborne aliphatic amine adduct epoxy curing agent designed to cure both epoxy resin emulsions and standard epoxy resins. ACQUAMINE PD 2157_2 has the following features: Fast dry time AND Long pot life. | Request Sample |
| ACRIPOL T 112 | Chemipol | ACRIPOL T 112 is an anionic thickener based on an acrylamide polymer. Reverse emulsion. It shows a high activity and efficacy in acid drain cleaners. After having applied the thickener, the product maintains its transparency. Appropriate for being used as...展开 ACRIPOL T 112 is an anionic thickener based on an acrylamide polymer. Reverse emulsion. It shows a high activity and efficacy in acid drain cleaners. After having applied the thickener, the product maintains its transparency. Appropriate for being used as a construction chemical additive. Once it is applied, the product is stable throughout a broad range of temperatures and salinity. It is completely stable in low pH values, between 2 and 5, being especially active in the range from 3 to 4. It can be added directly undiluted or after diluting it in water. 收起 | Request Sample |
| ACRTIPOL T 250P | Chemipol | ACRTIPOL T 250P is a rheology modifying agent, based on an acrylic polymer that gives a non-Newtonian, pseudoplastic behavior to the product. It´s specially developed for painting and coating and shows high thickening activity. The benefits of this produc...展开 ACRTIPOL T 250P is a rheology modifying agent, based on an acrylic polymer that gives a non-Newtonian, pseudoplastic behavior to the product. It´s specially developed for painting and coating and shows high thickening activity. The benefits of this product include clear and transparent results that dissolve immediately at room temperature, suspension properties that are sufficient for the development of scrubs and peels, comfortable texture, attractive consistency, and smooth touch. 收起 | Request Sample |
| Acrylic Resin GA-003 | DKSH | Acrylic Resin GA-003 is a solid acrylic resin containing epoxy functionality (GMA acrylic). It is used in thermosetting powder coatings to provide excellent outdoor durability. Typical applications include automotive trim and wheel clear coat. GA-003 can ...展开 Acrylic Resin GA-003 is a solid acrylic resin containing epoxy functionality (GMA acrylic). It is used in thermosetting powder coatings to provide excellent outdoor durability. Typical applications include automotive trim and wheel clear coat. GA-003 can be used with curative like 1, 12-dodecanedioic acid (DDDA) to produce clear coating of high gloss, smoothness and clarity. Other polyacrylic acids and polyanhydrides can also be used as curatives for specific coating properties. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| ALU D10011 | DKSH | ALU D10011 are non leafing aluminum pigment in paste. They have lenticular flakes of small particle size and sparkling effects.They have high metallic effect. Its solent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, ...展开 ALU D10011 are non leafing aluminum pigment in paste. They have lenticular flakes of small particle size and sparkling effects.They have high metallic effect. Its solent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection between different particle shapes. Its main application are non-leafing aluminium high end for solvent-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| ALU D10017 | DKSH | ALU D10017 is a non leafing aluminum pigment in paste. It has lenticular flakes of small particle size and sparkling effects. It has high metallic effect. The solvent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, cre...展开 ALU D10017 is a non leafing aluminum pigment in paste. It has lenticular flakes of small particle size and sparkling effects. It has high metallic effect. The solvent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection between different particle shapes. Its main application are non-leafing aluminium high end for solvent-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| ALU D10028 | DKSH | ALU D10028 are non leafing aluminum pigment in paste. They are lenticular flakes of medium particle size and sparkling effects. They have high metallic effect. The solvent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes...展开 ALU D10028 are non leafing aluminum pigment in paste. They are lenticular flakes of medium particle size and sparkling effects. They have high metallic effect. The solvent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection between different particle shapes. Its main application are non-leafing aluminium high end for solvent-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| ALU D2034 | DKSH | ALU D2034 is a non leafing aluminum pigment in paste. They are lenticular flakes of coarse particle size and sparkling effects. Its solvents are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effe...展开 ALU D2034 is a non leafing aluminum pigment in paste. They are lenticular flakes of coarse particle size and sparkling effects. Its solvents are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection between different particle shapes. Its main application are non-leafing aluminium high end for solvent-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| ALU F4016 | DKSH | ALU F4016 is a non leafing aluminum pigment in paste. It has irregular flakes of medium particle size. Its solvent is a white spirit and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection...展开 ALU F4016 is a non leafing aluminum pigment in paste. It has irregular flakes of medium particle size. Its solvent is a white spirit and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection between different particle shapes. Its main application are non-leafing aluminium high end for solvent-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| AMPARMOR 1043 | DKSH | AMPARMOR 1043 is a uniquely engineered two-part system of microcapsules containing a patented blend of healing agent based on silicone-based resins, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating appl...展开 AMPARMOR 1043 is a uniquely engineered two-part system of microcapsules containing a patented blend of healing agent based on silicone-based resins, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. AMPARMOR 1043 is recommended for use in liquid solvent-based, and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems. This product is available in Europe, Asia Pacific and North America. 收起 | Request Sample |
| AMPARMOR 2000 | DKSH | The AMPARMOR 2000 series is a uniquely engineered microcapsule containing a patented blend of healing agent based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating...展开 The AMPARMOR 2000 series is a uniquely engineered microcapsule containing a patented blend of healing agent based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. The AMPAMOR 2000 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems. This product is available in Europe, Asia Pacific and North America. 收起 | Request Sample |
| AMPARMOR 3000 | DKSH | The AMPARMOR 3000 series is a uniquely engineered microcapsule containing a patented healing agent blend based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating ap...展开 The AMPARMOR 3000 series is a uniquely engineered microcapsule containing a patented healing agent blend based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. The AMPAMOR 3000 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, alkyd, urethane and acrylic systems. This product is available in Europe, Asia Pacific and North America. 收起 | Request Sample |
| AMPARMOR 4010 | DKSH | The AMPARMOR 4010 series is a uniquely engineered microparticle containing a patented blend of corrosion inhibitors. These microparticles are designed to extend coating durability by releasing inhibitors in response to the onset of corrosion. The AMPARMOR...展开 The AMPARMOR 4010 series is a uniquely engineered microparticle containing a patented blend of corrosion inhibitors. These microparticles are designed to extend coating durability by releasing inhibitors in response to the onset of corrosion. The AMPARMOR 4010 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems. This product is available in Europe, Asia Pacific and North America. 收起 | Request Sample |
| AOX52 | DKSH | AOX52 is a highly concentrated, free flowing powder with strong antimicrobial activities and has proved antivirus activity against Covid19. It can be added to different kinds of paints and lacquers (water based, solvent based, solvent free) as well as to ...展开 AOX52 is a highly concentrated, free flowing powder with strong antimicrobial activities and has proved antivirus activity against Covid19. It can be added to different kinds of paints and lacquers (water based, solvent based, solvent free) as well as to thermoplastic materials (PP, PE, TPU, PU, ABS, PA etc.). This product is available in China, Taiwan, Japan, South Korea, Australia, New Zealand, India, USA. 收起 | Request Sample |
| BIOPOL BR 14 | Chemipol | BIOPOL BR 14 is a broad range in-can preservative based on BRONOPOL, specifically designed to avoid bacterial growth and damage caused by microorganisms in waterborne technical products. BIOPOL BR 14 is a cost-effective product with a broad range of activ...展开 BIOPOL BR 14 is a broad range in-can preservative based on BRONOPOL, specifically designed to avoid bacterial growth and damage caused by microorganisms in waterborne technical products. BIOPOL BR 14 is a cost-effective product with a broad range of activity. The preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL BR 14 does not release formaldehyde. BIOPOL BR 14 is stable in a broad range of pH and temperatures. BIOPOL BR 14 is fully soluble in water and most of the polar solvents. 收起 | Request Sample |
| BIOPOL BR 30 | Chemipol | BIOPOL BR 30 is a broad range in-can preservative based on BRONOPOL, specifically designed to avoid bacterial growth and damage caused by microorganisms in waterborne technical products. BIOPOL BR 14 is a cost-effective product with a broad range of activ...展开 BIOPOL BR 30 is a broad range in-can preservative based on BRONOPOL, specifically designed to avoid bacterial growth and damage caused by microorganisms in waterborne technical products. BIOPOL BR 14 is a cost-effective product with a broad range of activity. The preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL BR 30 does not release formaldehyde. BIOPOL BR 30 is stable in a broad range of pH and temperatures. BIOPOL BR 30 is fully soluble in water and most of the polar solvents. 收起 | Request Sample |
| BIOPOL BR 50 | Chemipol | BIOPOL BR 50 is a broad range in-can preservative based on CMIT/MIT and (Benzyloxy)Methanol, specifically designed to avoid bacterial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic...展开 BIOPOL BR 50 is a broad range in-can preservative based on CMIT/MIT and (Benzyloxy)Methanol, specifically designed to avoid bacterial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL BR 50 is a cost-effective preservative with a broad range of activity. BIOPOL BR 50 is an AOX & Formaldehyde free preservative. BIOPOL BR 50 is stable in a broad range of pH and temperatures. Especially appropriate for warm weather zones. 收起 | Request Sample |
| BIOPOL C 15 | Chemipol | BIOPOL C 15 is a broad range in-can preservative based on CMIT/MIT adsorbed on Caolin, specifically designed to avoid bacterial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paint...展开 BIOPOL C 15 is a broad range in-can preservative based on CMIT/MIT adsorbed on Caolin, specifically designed to avoid bacterial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL C 15 is formulated in powder form and it is AOX & VOC free. It is a formaldehyde free, cost-effective preservative. Especially appropriate for warm weather zones. As the preservative is water dispersible, it is not recommended for transparent products. 收起 | Request Sample |
| BIOPOL FI 31 | Chemipol | BIOPOL FI 31 is a broad range in-can preservative based on CMIT/MIT and formaldehyde, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. BIOPOL FI 31 is a cost-effective preservative. Its ...展开 BIOPOL FI 31 is a broad range in-can preservative based on CMIT/MIT and formaldehyde, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. BIOPOL FI 31 is a cost-effective preservative. Its balanced composition guarantees long-term preservation and quick biocidal action. The preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL FI 31 is stable in a broad range of pH and temperatures. 收起 | Request Sample |
| BIOPOL IB 61 | Chemipol | BIOPOL IB 61 is a broad range in-can preservative based on CMIT/MIT and Bronopol, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fille...展开 BIOPOL IB 61 is a broad range in-can preservative based on CMIT/MIT and Bronopol, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants and detergents. VOC-free product. BIOPOL IB 61 balanced composition guarantees a long-term preservative action and a quick biocidal activity. BIOPOL IB 61 is stable in a broad range of pH and temperatures. Preservative especially well-suited form warm weather zones. 收起 | Request Sample |
| BIOPOL ITS | Chemipol | BIOPOL ITS is a broad range in-can preservative based on CMIT/MIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, ...展开 BIOPOL ITS is a broad range in-can preservative based on CMIT/MIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL ITS is VOC & AOX & Formaldehyde free preservative. BIOPOL ITS has a broad range of activity and top stability under high temperatures, until 50ºC. 收起 | Request Sample |
| BIOPOL JL 101R | Chemipol | BIOPOL JL 101R is a broad range in-can preservative based on O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsio...展开 BIOPOL JL 101R is a broad range in-can preservative based on O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL JL 101R is a cost-effective preservative with fast biocidal activity. BIOPOL JL 101R is effective throughout a wide range of pH and temperatures. CMIT/MIT free preservative. Preservatives are especially appropriate for warm weather zones. 收起 | Request Sample |
| BIOPOL JL 75 | Chemipol | BIOPOL JL 75 is a broad range in-can preservative based on N-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions...展开 BIOPOL JL 75 is a broad range in-can preservative based on N-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL JL 75 is a cost-effective preservative with fast biocidal activity. BIOPOL JL 75 is effective throughout a wide range of pH and temperatures. 收起 | Request Sample |
| BIOPOL JM 140L | Chemipol | BIOPOL JM 140L is a broad range in-can preservative based on CMIT/MIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. BIOPOL JM 140L is a cost-effective preservative with ...展开 BIOPOL JM 140L is a broad range in-can preservative based on CMIT/MIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. BIOPOL JM 140L is a cost-effective preservative with excellent protection of the vapor phase. Preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants and detergents. BIOPOL JM 140L is stable in a broad range of pH and temperatures. Especially well-suited form warm weather zones. 收起 | Request Sample |
| BIOPOL JM 15 | Chemipol | BIOPOL JM 15 is a broad range in-can preservative based on CMIT/MIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. BIOPOL JM 15 is a cost-effective preservative with exce...展开 BIOPOL JM 15 is a broad range in-can preservative based on CMIT/MIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. BIOPOL JM 15 is a cost-effective preservative with excellent protection of the vapor phase. Preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants and detergents. BIOPOL JM 15 is stable in a broad range of pH and temperatures. Preservatives are especially well-suited for warm weather zones 收起 | Request Sample |
| BIOPOL JM 29 | Chemipol | BIOPOL JM 29 is a broad range in-can preservative based on CMIT/MIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. BIOPOL JM 29 is a cost-effective preservative. BIOPOL J...展开 BIOPOL JM 29 is a broad range in-can preservative based on CMIT/MIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. BIOPOL JM 29 is a cost-effective preservative. BIOPOL JM 29 balanced composition guarantees long-term preservation and a quick biocidal action. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL JM JM 29 is stable in a broad range of pH and temperatures. Preservatives specially well-suited form warm weather zones. 收起 | Request Sample |
| BIOPOL K14 | Chemipol | BIOPOL K14 is a non-oxidizing biocidal product based on CMIT/MIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, g...展开 BIOPOL K14 is a non-oxidizing biocidal product based on CMIT/MIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. AOX, VOC, CMR, and Formaldehyde free preservatives. Cost-effective product. BIOPOL K14 is stable in a broad range of pH and temperatures. Excellent solution for formaldehyde-sensible products. 收起 | Request Sample |
| BIOPOL KB | Chemipol | BIOPOL KB is a broad range of in-can preservatives based on CMIT/MIT and BIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, filler...展开 BIOPOL KB is a broad range of in-can preservatives based on CMIT/MIT and BIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. AOX & Formaldehyde free preservative. Cost-effective product. BIOPOL KB balanced composition guarantees long-term preservation without skin sensitization (H317) labeling. BIOPOL KB is stable in a broad range of pH and temperatures. Preservative especially appropriate for formaldehyde-sensible products. 收起 | Request Sample |
| BIOPOL KBB | Chemipol | BIOPOL KBB is a broad range of in-can preservatives based on CMIT/MIT, BIT, and BRONOPOL, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. The preservative product is suitable for plasti...展开 BIOPOL KBB is a broad range of in-can preservatives based on CMIT/MIT, BIT, and BRONOPOL, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. The preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. AOX & Formaldehyde free preservative. BIOPOL KBB balanced composition guarantees long-term preservation without skin sensitization (H317) labeling. BIOPOL KBB is stable in a broad range of pH and temperatures. Preservatives are especially appropriate for formaldehyde-sensible products. 收起 | Request Sample |
| BIOPOL KBJ | Chemipol | BIOPOL KBJ is a broad range of in-can preservatives based on CMIT/MIT, BIT, and BRONOPOL, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative products suitable for plastic pain...展开 BIOPOL KBJ is a broad range of in-can preservatives based on CMIT/MIT, BIT, and BRONOPOL, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative products suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. AOX & Formaldehyde free preservative. Cost-effective preservative. BIOPOL KBJ balanced composition guarantees long-term preservation without skin sensitization (EUH208) labeling. BIOPOL KBJ is stable in a broad range of pH and temperatures. Especially appropriate for formaldehyde-sensible products. 收起 | Request Sample |
| BIOPOL KF 15 | Chemipol | BIOPOL KF 15 is a broad range in-can preservative based on OIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, fillers...展开 BIOPOL KF 15 is a broad range in-can preservative based on OIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL KF 15 balanced composition guarantees long-term preservation and a quick biocidal action. BIOPOL KF 15 is a cost-effective preservative that requires a low dosage. Preservatives are especially well-suited for warm weather zones. 收起 | Request Sample |
| BIOPOL KF 78 | Chemipol | BIOPOL KF 78 is a broad range in-can preservative based on OIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative products suitable for plastic paints, fillers, ...展开 BIOPOL KF 78 is a broad range in-can preservative based on OIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative products suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL KF 78 balanced composition guarantees long-term preservation and a quick biocidal action. BIOPOL KF 78 is a cost-effective preservative that requires a low dosage. Preservative especially well-suited for warm weather zones. 收起 | Request Sample |
| BIOPOL MSO 35 | Chemipol | BIOPOL MSO 35 is a broad range in-can preservative based on CMIT/MIT and N-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative products suitable for plastic paints, fil...展开 BIOPOL MSO 35 is a broad range in-can preservative based on CMIT/MIT and N-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative products suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL MSO 35 balanced composition guarantees long-term preservation and a quick biocidal action. BIOPOL MSO 35 is excellent to protect the vapor phase of the product. BIOPOL MSO 35 is stable in a broad range of pH and temperatures. 收起 | Request Sample |
| BIOPOL MSO 40 | Chemipol | BIOPOL MSO 40 is a broad range in-can preservative based on CMIT/MIT and formaldehyde donor, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic...展开 BIOPOL MSO 40 is a broad range in-can preservative based on CMIT/MIT and formaldehyde donor, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL MSO 40 balanced composition guarantees a long-term preservation and a quick biocidal action. BIOPOL MSO 40 has a reduced skin sensitization potential. BIOPOL MSO 40 is stable in a broad range of pH and temperatures. 收起 | Request Sample |
| BIOPOL PK 5 | Chemipol | BIOPOL PK 5 is a broad range, solid in-can preservative based on CMIT/MIT and Bronopol adsorbed on Silica, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. The preservative product is s...展开 BIOPOL PK 5 is a broad range, solid in-can preservative based on CMIT/MIT and Bronopol adsorbed on Silica, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. The preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL PK 5 is VOC & AOX free preservative. Its balanced composition guarantees long-term preservation and quick biocidal action. Dust free 收起 | Request Sample |
| BIOPOL TC 3 | Chemipol | BIOPOL TC 3 is a broad range in-can preservative based on CMIT/MIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions,...展开 BIOPOL TC 3 is a broad range in-can preservative based on CMIT/MIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL TC 3 is an AOX & VOC free preservative. BIOPOL TC 3 is free of formaldehyde. Its balanced composition guarantees a long-term preservative action. BIOPOL TC 3 is stable in a broad range of pH and temperatures. Especially appropriate for formaldehyde-sensible products. 收起 | Request Sample |
| BIOPOL TI 158 | Chemipol | BIOPOL TI 158 is a broad range in-can preservative based on CMIT/MIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. The preservative product is suitable for plastic paint...展开 BIOPOL TI 158 is a broad range in-can preservative based on CMIT/MIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. The preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL TI 158 is a cost-effective preservative with excellent protection of vapor phase. Its balanced composition guarantees a long-term preservative action. BIOPOL TI 158 is stable in a broad range of pH and temperatures. 收起 | Request Sample |
| BIOPOL TRC 150 | Chemipol | BIOPOL TRC 150 is a broad-range, solid in-can preservative based on MIT and BIT adsorbed in kaolin, specifically designed to avoid microbial growth and damage caused by microorganisms in technical products such as ceramics, glazes, or any aqueous suspensi...展开 BIOPOL TRC 150 is a broad-range, solid in-can preservative based on MIT and BIT adsorbed in kaolin, specifically designed to avoid microbial growth and damage caused by microorganisms in technical products such as ceramics, glazes, or any aqueous suspension susceptible to colonized by bacteria. BIOPOL TRC 150 balanced composition guarantees a long-term preservation action. BIOPOL TRC 150 is a cost-effective preservative effective in a broad range of pH and temperatures. 收起 | Request Sample |
| BIOPOL VR 20 | Chemipol | BIOPOL VR 20 is a broad range in-can preservative based on BIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glu...展开 BIOPOL VR 20 is a broad range in-can preservative based on BIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. AOX, VOC, CMIT/MIT, and Formaldehyde free preservatives. Cost-effective product. BIOPOL VR 20 balanced composition guarantees a long-term preservation action. BIOPOL VR 20 is stable in a broad range of pH and temperatures. Preservative especially appropriate for formaldehyde-sensible products 收起 | Request Sample |
| BIOPOL XM | Chemipol | BIOPOL XM is a broad range in-can preservative based on MIT and BIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions...展开 BIOPOL XM is a broad range in-can preservative based on MIT and BIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. AOX & VOC & Formaldehyde free preservative. Cost-effective preservatives are effective throughout a wide range of pH, from 2 to 10. BIOPOL XM balanced composition guarantees a long-term preservation action. Preservatives are especially appropriate for formaldehyde-sensible products. 收起 | Request Sample |
| BIOPOL XMD 5050 | Chemipol | BIOPOL XMD 5050 is a broad range in-can preservative based on MIT/BIT and Bronopol, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fil...展开 BIOPOL XMD 5050 is a broad range in-can preservative based on MIT/BIT and Bronopol, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants and detergents. BIOPOL XMD 5050 is an AOX & VOC free preservative. BIOPOL XMD 5050 is effective throughout a wide range of pH, from 2 to 10. BIOPOL XMD 5050 is stable in a broad range of pH and temperatures. Preservative specially well-suited for warm weather zones. 收起 | Request Sample |
| BIOPOL XMO 210 | Chemipol | BIOPOL XMO 210 is a broad range in-can preservative based on MIT and BIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, fillers, e...展开 BIOPOL XMO 210 is a broad range in-can preservative based on MIT and BIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. AOX & VOC & Formaldehyde free preservative. Cost-effective preservatives effective throughout a wide range of pH, from 2 to 10. BIOPOL XMO 210 balanced composition guarantees a long-term preservation action. BIOPOL XMO 210 is stable in a broad range of pH and temperatures. Specially appropriate for formaldehyde-sensible products. 收起 | Request Sample |
| CD 1525 WH-4 | DKSH | CD 1525 WH-4 is an aluminum pigment in paste water-based. It is an aluminum flakes medium particle size. The product is stabilized with additives, water miscible solvents and emulsifier. It is used preferably for neutral or slightly basic system. CD Line ...展开 CD 1525 WH-4 is an aluminum pigment in paste water-based. It is an aluminum flakes medium particle size. The product is stabilized with additives, water miscible solvents and emulsifier. It is used preferably for neutral or slightly basic system. CD Line is composed of aluminum pigments in paste, specially treated to protect the pigment in the aqueous systems.Its main applications are leafing for coatings and inks water-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| CD 3008 WH-4 | DKSH | CD 3008 WH-4 is an aluminum pigment in paste water-based. It has aluminum flakes small particle size. The product stabilized with additives, water miscible solvents and emulsifier. Used preferably for neutral or slightly basic system. CD Line is composed...展开 CD 3008 WH-4 is an aluminum pigment in paste water-based. It has aluminum flakes small particle size. The product stabilized with additives, water miscible solvents and emulsifier. Used preferably for neutral or slightly basic system. CD Line is composed of aluminum pigments in paste, specially treated to protect the pigment in the aqueous systems. Its main applications are leafing for coatings and inks water-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| CHEMICRYL 100 FA | Chemipol | CHEMICRYL 100 FA is a dispersing and wetting agent suitable for the dispersion of organic and inorganic pigments in aqueous coatings and printing ink applications. And it is also Eco-friendly and Free of VOCs. As a polymer dispersant for aqueous coatings ...展开 CHEMICRYL 100 FA is a dispersing and wetting agent suitable for the dispersion of organic and inorganic pigments in aqueous coatings and printing ink applications. And it is also Eco-friendly and Free of VOCs. As a polymer dispersant for aqueous coatings and printing inks shows great efficacy in the following aspects: Accomplishes excellent pigment stabilization, even in highly charged pigmentary pastes. It has excellent moistening properties for inorganic and organic pigments. It achieves high levels of brightness and resistance to color. Presents an excellent color intensity and viscosity reduction. 收起 | Request Sample |
| CHEMICRYL 250 | Chemipol | CHEMICRYL 250 is a dispersing agent based on a polyelectrolyte from an acrylic polymer. CHEMICRYL 250 creates high stable dispersions and has great stability under extreme temperatures. Improves the color performance. CHEMICRYL 500C dispersing agent has b...展开 CHEMICRYL 250 is a dispersing agent based on a polyelectrolyte from an acrylic polymer. CHEMICRYL 250 creates high stable dispersions and has great stability under extreme temperatures. Improves the color performance. CHEMICRYL 500C dispersing agent has been specifically developed for improving charge and pigment dispersion in aqueous paints. 收起 | Request Sample |
| CHEMICRYL 500C | Chemipol | CHEMICRYL 500C is a dispersing agent based on a polyelectrolyte from an acrylic polymer. CHEMICRYL 500C creates high stable dispersions and has great stability under extreme temperatures. Improves the color performance. CHEMICRYL 500C dispersing agent has...展开 CHEMICRYL 500C is a dispersing agent based on a polyelectrolyte from an acrylic polymer. CHEMICRYL 500C creates high stable dispersions and has great stability under extreme temperatures. Improves the color performance. CHEMICRYL 500C dispersing agent has been specifically developed for improving charge and pigment dispersion in aqueous paints. 收起 | Request Sample |
| CHEMICRYL 600 BP | Chemipol | CHEMICRYL 600 BP is a polymeric dispersing agent with wetting properties suitable for high-quality aqueous coatings and pigment pastes. CHEMICRYL 600 BP dispersing agent is recommended for highly charged pigment pastes. Suitable for all kinds of pigments....展开 CHEMICRYL 600 BP is a polymeric dispersing agent with wetting properties suitable for high-quality aqueous coatings and pigment pastes. CHEMICRYL 600 BP dispersing agent is recommended for highly charged pigment pastes. Suitable for all kinds of pigments. Low propensity to foam generation, does not alter the shelf life of the product nor the anticorrosion effect. 收起 | Request Sample |
| CHEMICRYL 900 BP | Chemipol | CHEMICRYL 900 BP is a polymeric dispersing agent with wetting properties suitable for high-quality aqueous coatings and pigment pastes. CHEMICRYL 900 BP has been specifically designed to stabilize organic and inorganic aqueous-based pigments. Excellent de...展开 CHEMICRYL 900 BP is a polymeric dispersing agent with wetting properties suitable for high-quality aqueous coatings and pigment pastes. CHEMICRYL 900 BP has been specifically designed to stabilize organic and inorganic aqueous-based pigments. Excellent development of color intensity. Increases the stability of the pigments. 收起 | Request Sample |
| CHEMICRYL 950 BP | Chemipol | CHEMICRYL 950 BP is a high molecular dispersing agent with wetting properties, suitable for high-quality aqueous coatings and pigment pastes. CHEMICRYL 950 BP dispersing agent has been specifically designed to stabilize organic and inorganic adueous-based...展开 CHEMICRYL 950 BP is a high molecular dispersing agent with wetting properties, suitable for high-quality aqueous coatings and pigment pastes. CHEMICRYL 950 BP dispersing agent has been specifically designed to stabilize organic and inorganic adueous-based pigments. Excellent development of color intensity. Increases the stability of the pigments. 收起 | Request Sample |
| CHEMIPHOS 100 | Chemipol | CHEMIPHOS 100 is a dispersing and sequestering agent based on polyphosphates. CHEMIPOS 100 has a great dispersing capacity of charges and pigments. Improve solids incorporation and boosts anti-flocculent and anti-settling properties. Reduce the harmful ef...展开 CHEMIPHOS 100 is a dispersing and sequestering agent based on polyphosphates. CHEMIPOS 100 has a great dispersing capacity of charges and pigments. Improve solids incorporation and boosts anti-flocculent and anti-settling properties. Reduce the harmful effect of alkaline earth divalent metal cations. 收起 | Request Sample |
| CHEMIPOL BC LIQUIDO | Chemipol | CHEMIPOL BC LIQUIDO is a chelating agent based on a blend of anticaking agents that creates soluble and stable complexes with cations, preventing them from harmful action. CHEMIPOL BC LIQUIDO chelating agent avoids interference due to water hardness. Spec...展开 CHEMIPOL BC LIQUIDO is a chelating agent based on a blend of anticaking agents that creates soluble and stable complexes with cations, preventing them from harmful action. CHEMIPOL BC LIQUIDO chelating agent avoids interference due to water hardness. Specifically designed to improve the dry film generation process in high PVC paints. Highly compatible with habitual components of aqueous paints. 收起 | Request Sample |
| CHEMIPOL P 60 | Chemipol | CHEMIPOL P 60 is a water-based wax emulsion of anionic/nonionic refined waxes. Highly compatible with habitual components of coatings. Does not alter the wet rub film resistance. | Request Sample |
| CHEMIPOL P 80 | Chemipol | CHEMIPOL P 60 wax emulsion improves the hydrophobic properties of high PVC paints, extending the period before the film dries. Its qualities prevent the product from the typical issues due to too fast drying. | Request Sample |
| CHEMIPOL SMART 100 | Chemipol | CHEMIPOL SMART 100 is not only a smart additive for painting and coating but also a stabilized aqueous suspension of ultrafine chemical compounds with excellent photocatalytic activity in the presence of natural or artificial UV light. This product is use...展开 CHEMIPOL SMART 100 is not only a smart additive for painting and coating but also a stabilized aqueous suspension of ultrafine chemical compounds with excellent photocatalytic activity in the presence of natural or artificial UV light. This product is used for its self-cleaning effect on various building materials and other surfaces, textiles, gras, and ceramics, also is appropriate to be used as a remover of unpleasant odors and for mold and fungi prevention (due to its antiviral and antibacterial effect). The value of pH is 7.0-90. 收起 | Request Sample |
| CHEMIPOL SMART 200 | Chemipol | CHEMIPOL SMART 200 is a stabilized aqueous suspension of ultrafine chemical compounds with high photocatalytic activity in the presence of natural or artificial UV light. An obvious difference between SMART 100 and Smart 200 is the PH range, which can mee...展开 CHEMIPOL SMART 200 is a stabilized aqueous suspension of ultrafine chemical compounds with high photocatalytic activity in the presence of natural or artificial UV light. An obvious difference between SMART 100 and Smart 200 is the PH range, which can meet customers' needs for different PH value ranges. This additive’s pH range is 6.0-8.0. 收起 | Request Sample |
| CHEMIPOL UV 01N | Chemipol | CHEMIPOL UV 01N is an optical brightener for white, interior, and aqueous paints. CHEMIPOL UV 01N enhances the perception of white color when it is exposed to natural light. CHEMIPOL UV 01N performance is better than traditional blue and violet pigments. ...展开 CHEMIPOL UV 01N is an optical brightener for white, interior, and aqueous paints. CHEMIPOL UV 01N enhances the perception of white color when it is exposed to natural light. CHEMIPOL UV 01N performance is better than traditional blue and violet pigments. Good compatibility with paints and coatings raw materials. CHEMIPOL UV 01N is an optical brightener specifically designed for paints containing low amount of Titanium Dioxide. CHEMIPOL UV 01N is a cumulative agent, increasing the whitening effect proportionally to the amount of product added until saturation point. 收起 | Request Sample |
| CHEMIPOL UV 05 N | Chemipol | CHEMIPOL UV 05 N is an optical brightener for white, interior, and aqueous paints. CHEMIPOL UV 05N enhances the perception of white color when it is exposed to natural light. CHEMIPOL UV 05N performance is better than traditional blue and violet pigments....展开 CHEMIPOL UV 05 N is an optical brightener for white, interior, and aqueous paints. CHEMIPOL UV 05N enhances the perception of white color when it is exposed to natural light. CHEMIPOL UV 05N performance is better than traditional blue and violet pigments. Good compatibility with paints and coatings raw materials. CHEMIPOL UV 05N is an optical brightener specifically designed for paints containing low amount of Titanium Dioxide. CHEMIPOL UV 05N is a non-cumulative agent, increasing the whitening effect proportionally to the amount of product added without a grayish effect due to overdosage. 收起 | Request Sample |
| CHEMIPOL UV 07 N | Chemipol | CHEMIPOL UV 07 N is an optical brightener for white, interior, and aqueous paints. CHEMIPOL UV 07N enhances the perception of white color when it is exposed to natural light. CHEMIPOL UV 07N performance is better than traditional blue and violet pigments....展开 CHEMIPOL UV 07 N is an optical brightener for white, interior, and aqueous paints. CHEMIPOL UV 07N enhances the perception of white color when it is exposed to natural light. CHEMIPOL UV 07N performance is better than traditional blue and violet pigments. Good compatibility with paints and coatings raw materials. CHEMIPOL UV 07N is an optical brightener specifically designed for paints containing low amount of Titanium Dioxide. CHEMIPOL UV 07N is a cumulative agent, increasing the whitening effect proportionally to the amount of product added until saturation point. 收起 | Request Sample |
| CHEMIPOL UV 150N | Chemipol | CHEMIPOL UV 150N is an optical brightener for white, interior, and aqueous paints. CHEMIPOL UV 0150N enhances the perception of white color when it is exposed to natural light. CHEMIPOL UV 0140N performance is better than traditional blue and violet pigme...展开 CHEMIPOL UV 150N is an optical brightener for white, interior, and aqueous paints. CHEMIPOL UV 0150N enhances the perception of white color when it is exposed to natural light. CHEMIPOL UV 0140N performance is better than traditional blue and violet pigments. Good compatibility with paints and coatings raw materials. CHEMIPOL UV 150N is an optical brightener specifically designed for paints containing low amounts of Titanium Dioxide. CHEMIPOL UV 150N is a non-cumulative agent, increasing the whitening effect proportionally to the amount of product added without a grayish effect due to overdosage. 收起 | Request Sample |
| CHEMIPOL UVA 150 | Chemipol | CHEMIPOL UVA 150 is a UV absorber for paints. The advantages are including stabilized aqueous suspension of ultrafine Titanium dioxide (TiO2) without pigmentary properties, neutral pH, and high transparency. Specifically appropriate for polymeric paints n...展开 CHEMIPOL UVA 150 is a UV absorber for paints. The advantages are including stabilized aqueous suspension of ultrafine Titanium dioxide (TiO2) without pigmentary properties, neutral pH, and high transparency. Specifically appropriate for polymeric paints needing UV protection. It is also suitable for any transparent coating, providing them with long-term UV screening in various substrates (wood, plastics, etc.). The particle size is approximately 10 nanometers, a low surface tension for the coating. 收起 | Request Sample |
| CHEMIPOL UVA 220 | Chemipol | CHEMIPOL UVA 220 is a UV absorber for paints. The advantages include stabilized aqueous suspension of ultrafine Titanium dioxide (TiO2) without pigmentary properties, neutral pH, and high transparency. Specifically appropriate for polymeric paints needing...展开 CHEMIPOL UVA 220 is a UV absorber for paints. The advantages include stabilized aqueous suspension of ultrafine Titanium dioxide (TiO2) without pigmentary properties, neutral pH, and high transparency. Specifically appropriate for polymeric paints needing UV protection. It is also suitable for any transparent coating, providing them with long-term UV screening in various substrates (wood, plastics, etc.). The particle size is approximately 30 nanometers. 收起 | Request Sample |
| CO2PURE AIR PURIFIER | DKSH | CO2PURE AIR PURIFIER is an organic Painting with Single environmental technology, cleanses and purifies air, works day and night against environmental pollution by reducing gases CO2, NOx and VOC's, its lack of smell makes it particularly suitable for pai...展开 CO2PURE AIR PURIFIER is an organic Painting with Single environmental technology, cleanses and purifies air, works day and night against environmental pollution by reducing gases CO2, NOx and VOC's, its lack of smell makes it particularly suitable for painting walls, ceilings indoors and outdoors, public places, schools, hospitals etc. This product is available in Asia. 收起 | Request Sample |
| DENSIPOL DF 152 | Chemipol | DENSIPOL DF 152 is an antifoaming agent based on an alkylene oxide copolymer on fatty alcohol. Effective throughout a wide range of pH, salinity, and temperature. Highly effective controlling the foaming generation process in urban and industrial wastewat...展开 DENSIPOL DF 152 is an antifoaming agent based on an alkylene oxide copolymer on fatty alcohol. Effective throughout a wide range of pH, salinity, and temperature. Highly effective controlling the foaming generation process in urban and industrial wastewater plants and other water-based systems. 收起 | Request Sample |
| DENSIPOL DF 155 | Chemipol | DENSIPOL DF 155 is an antifoaming agent based on ethylene oxide copolymers on lineal alcohol. Cost-effective, free of silicone antifoaming agent. Effective throughout a wide range of pH and temperatures. Highly effective in controlling the foaming generat...展开 DENSIPOL DF 155 is an antifoaming agent based on ethylene oxide copolymers on lineal alcohol. Cost-effective, free of silicone antifoaming agent. Effective throughout a wide range of pH and temperatures. Highly effective in controlling the foaming generation process during the manufacturing, handling, and storage processes of paints and aqueous glues. To obtain full antifoaming protection, it is recommended to combine the product with a defoamer such as DENSIPOL DF 800. 收起 | Request Sample |
| DENSIPOL DF 156 | Chemipol | DENSIPOL DF 156 is an antifoaming agent for waterborne technical products, specifically designed to be used as an antifoaming agent for cement slurries. Silicone free. As it is based on copolymers, its effective throughout a wide range of pH and tempera...展开 DENSIPOL DF 156 is an antifoaming agent for waterborne technical products, specifically designed to be used as an antifoaming agent for cement slurries. Silicone free. As it is based on copolymers, its effective throughout a wide range of pH and temperature. Highly effective in controlling the foaming generation process during manufacturing, handling, and storage processes of paints and aqueous glues. Appropriate for products based on different resins, such as acrylic-styrene, pure acrylic, alkydic, butadiene-styrene, and polyvinyl acetate. 收起 | Request Sample |
| DENSIPOL DF 800 | Chemipol | DENSIPOL DF 800 is an antifoaming agent based on oxide copolymers on fatty acids. Cost-effective, free of silicone antifoaming agent. Effective throughout a wide range of pH and temperatures. Highly effective in controlling the foaming generation process ...展开 DENSIPOL DF 800 is an antifoaming agent based on oxide copolymers on fatty acids. Cost-effective, free of silicone antifoaming agent. Effective throughout a wide range of pH and temperatures. Highly effective in controlling the foaming generation process during manufacturing, handling, and storage processes of paints, aqueous glues, and cooling circuits. 收起 | Request Sample |
| DENSIPOL DF 820 | Chemipol | DENSIPOL DF 820 is an emulsion antifoaming agent based on alkoxylated compounds and fatty acids derivates. Cost-effective, free of silicone antifoaming agent. Effective throughout a wide range of pH and temperatures. Highly effective in controlling the f...展开 DENSIPOL DF 820 is an emulsion antifoaming agent based on alkoxylated compounds and fatty acids derivates. Cost-effective, free of silicone antifoaming agent. Effective throughout a wide range of pH and temperatures. Highly effective in controlling the foaming generation process during manufacturing, handling, and storage processes of paints, aqueous glues, and cooling circuits. Complies with Food-Contact Regulations: BfR XXXVI & FDA 21.176.210. 收起 | Request Sample |
| DENSIPOL PA 2497 | Chemipol | DENSIPOL PA 2497 is an antifoaming agent based on mineral compounds and nonionic surfactant specifically designed for controlling the foaming generation process during manufacturing, handling and storage processes of paints, printing inks, adhesives and a...展开 DENSIPOL PA 2497 is an antifoaming agent based on mineral compounds and nonionic surfactant specifically designed for controlling the foaming generation process during manufacturing, handling and storage processes of paints, printing inks, adhesives and aqueous glues. Cost-effective, silicone-free antifoaming agent. Excellent emulsifiability. Excellent antifoaming effect in paints with a PVC range between 50 and 85. 收起 | Request Sample |
| DENSIPOL PA 318 | Chemipol | DENSIPOL PA 318 is an antifoaming and defoamer agent based on mineral compounds and nonionic surfactants, specifically designed for avoiding foam generation during manufacturing and application of waterborne technical products and sewages. Excellent antif...展开 DENSIPOL PA 318 is an antifoaming and defoamer agent based on mineral compounds and nonionic surfactants, specifically designed for avoiding foam generation during manufacturing and application of waterborne technical products and sewages. Excellent antifoaming effect in paints with a PVC range between 30 and 70. 收起 | Request Sample |
| DENSIPOL PA 700 | Chemipol | DENSIPOL PA 700 is an antifoaming agent based on mineral compounds, wax, hydrophobic silica, and nonionic surfactants. Cost-effective antifoaming agent. Excellent emulsifiability properties. Highly effective in controlling the foaming generation process d...展开 DENSIPOL PA 700 is an antifoaming agent based on mineral compounds, wax, hydrophobic silica, and nonionic surfactants. Cost-effective antifoaming agent. Excellent emulsifiability properties. Highly effective in controlling the foaming generation process during manufacturing, handling, and storage processes of paints, printing inks, adhesives, and aqueous glues. 收起 | Request Sample |
| DENSIPOL PA 934 | Chemipol | DENSIPOL PA 934 is an antifoaming agent based on mineral compounds, wax, hydrophobic silica, and nonionic surfactants. Cost-effective, silicone-free antifoaming agent. Excellent emulsifiability properties. Highly effective in controlling the foaming gener...展开 DENSIPOL PA 934 is an antifoaming agent based on mineral compounds, wax, hydrophobic silica, and nonionic surfactants. Cost-effective, silicone-free antifoaming agent. Excellent emulsifiability properties. Highly effective in controlling the foaming generation process during manufacturing, handling, and storage processes of paints, printing inks, adhesives, and aqueous glues. Excellent antifoaming effect in low PVC paints. 收起 | Request Sample |
| DENSIPOL PS 100 | Chemipol | DENSIPOL PS 100 is an antifoaming agent based on organomodified, three-dimensional polysiloxanes and nonionic surfactants. Cost-effective antifoaming agent. Great efficacy in high-shearing conditions. Highly effective in controlling the foaming generation...展开 DENSIPOL PS 100 is an antifoaming agent based on organomodified, three-dimensional polysiloxanes and nonionic surfactants. Cost-effective antifoaming agent. Great efficacy in high-shearing conditions. Highly effective in controlling the foaming generation process during manufacturing, handling, and storage processes of paints, printing inks, adhesives, and aqueous glues. Due to its composition, DENSIPOL PS 100 does not generate a tinged effect, and that makes the product especially appropriate for high-brightness products. 收起 | Request Sample |
| DENSIPOL PS 200 | Chemipol | DENSIPOL PS 200 is an emulsion antifoaming agent based on organic, modified silicones suitable for a broad range of pH and temperatures. Highly effective in controlling the foaming generation process in several industrial processes, specially taladrines, ...展开 DENSIPOL PS 200 is an emulsion antifoaming agent based on organic, modified silicones suitable for a broad range of pH and temperatures. Highly effective in controlling the foaming generation process in several industrial processes, specially taladrines, industrial lubricants, and coolants. Cost-effective antifoaming agent. Great long-term foaming control. 收起 | Request Sample |
| DENSIPOL PS 400 | Chemipol | DENSIPOL PS 400 is an antifoaming agent based on organomodified polysiloxanes and polyglycols, specially designed for paints and industrial coatings. Cost-effective antifoaming agent. Suitable for indirect food contact (BfR, EU 2011/10) Highly effective i...展开 DENSIPOL PS 400 is an antifoaming agent based on organomodified polysiloxanes and polyglycols, specially designed for paints and industrial coatings. Cost-effective antifoaming agent. Suitable for indirect food contact (BfR, EU 2011/10) Highly effective in controlling the foaming generation process during manufacturing, handling, and storage processes of paints, printing inks, adhesives, and aqueous glues. Excellent antifoaming effect in paints with a PVC range between 50 and 85. 收起 | Request Sample |
| DENSIPOL PS 450 | Chemipol | DENSIPOL PS 450 is a defoamer agent based on organomodified polysiloxanes for paints and industrial coatings. With its excellent emulsifiability, improving the leveling, moistening, wear resistance, and slip resistance of the product. Highly effective in ...展开 DENSIPOL PS 450 is a defoamer agent based on organomodified polysiloxanes for paints and industrial coatings. With its excellent emulsifiability, improving the leveling, moistening, wear resistance, and slip resistance of the product. Highly effective in controlling the foaming generation process during manufacturing, handling, and storage processes of paints, printing ink, adhesives, and aqueous glues. Extensively used in a wide variety of aqueous technical products such as paints and coatings. 收起 | Request Sample |
| DENSIPOL PS 50 | Chemipol | DENSIPOL PS 50 is an antifoaming agent based on organomodified, three-dimensional polysiloxanes and nonionic surfactants. Cost-effective antifoaming agent. Great efficacy in high-shearing conditions. Highly effective in controlling the foaming generation ...展开 DENSIPOL PS 50 is an antifoaming agent based on organomodified, three-dimensional polysiloxanes and nonionic surfactants. Cost-effective antifoaming agent. Great efficacy in high-shearing conditions. Highly effective in controlling the foaming generation process during manufacturing, handling, and storage processes of paints, printing inks, adhesives, and aqueous glues. Due to its composition, DENSIPOL PS 50 does not generate a tinged effect, and that makes the product especially appropriate for high-brightness products. 收起 | Request Sample |
| DENSIPOL WO 2402 | Chemipol | DENSIPOL WO 2402 is an antifoaming agent based on hydrocarbons, fatty acids, and hydrophobic particles. Cost-effective antifoaming agent. Silicone free. Highly effective controlling the foaming generation process during manufacturing, handling, and storag...展开 DENSIPOL WO 2402 is an antifoaming agent based on hydrocarbons, fatty acids, and hydrophobic particles. Cost-effective antifoaming agent. Silicone free. Highly effective controlling the foaming generation process during manufacturing, handling, and storage processes of paints, printing inks, adhesives, and aqueous glues. 收起 | Request Sample |
| DENSIPOL WO 2901 | Chemipol | DENSIPOL WO 2901 is an antifoaming agent based on hydrocarbons, fatty acids and hydrophobic particles. Cost-effective antifoaming agent. Versatile antifoaming agent free of silicone. Highly effective controlling the foaming generation process during manuf...展开 DENSIPOL WO 2901 is an antifoaming agent based on hydrocarbons, fatty acids and hydrophobic particles. Cost-effective antifoaming agent. Versatile antifoaming agent free of silicone. Highly effective controlling the foaming generation process during manufacturing, handling and storage processes of paints, printing inks, adhesives and aqueous glues. Excellent antifoaming effect in paints with a PVC range between 50 and 85. Complies with Indirect Food Contact Regulations: FDA CFR Section 175.105 收起 | Request Sample |
| DENSIPOL WO 2915 | Chemipol | DENSIPOL WO 2915 is an antifoaming agent based on hydrocarbons, fatty acids, and hydrophobic particles. Cost-effective antifoaming agent. A versatile antifoaming agent with silicone. Boosted antifoaming effect for paints suitable for silicone. Highly effe...展开 DENSIPOL WO 2915 is an antifoaming agent based on hydrocarbons, fatty acids, and hydrophobic particles. Cost-effective antifoaming agent. A versatile antifoaming agent with silicone. Boosted antifoaming effect for paints suitable for silicone. Highly effective in controlling the foaming generation process during manufacturing, handling, and storage processes of paints, printing inks, adhesives and aqueous glues. Excellent antifoaming effect in paints with a PVC range between 40 and 85. 收起 | Request Sample |
| DENSIPOL WO 3025 | Chemipol | DENSIPOL WO 3025 is an antifoaming agent based on hydrocarbons, fatty acids, and hydrophobic particles. Cost-effective antifoaming agent. Excellent emulsifiability and great stability properties. Highly effective in controlling the foaming generation proc...展开 DENSIPOL WO 3025 is an antifoaming agent based on hydrocarbons, fatty acids, and hydrophobic particles. Cost-effective antifoaming agent. Excellent emulsifiability and great stability properties. Highly effective in controlling the foaming generation process during manufacturing, handling, and storage processes of paints, printing inks, adhesives, and aqueous glues. Excellent antifoaming effect in paints with a PVC range between 50 and 85. 收起 | Request Sample |
| DENSURF HR 700A | DKSH | DENSURF HR 700A is ambient curing silicon resin used in heat and corrosion resistant coatings. Thermal stability up to 600-650 °C and corrosion protection are achieved in combination with the suitable formulations. This product is available for North Ame...展开 DENSURF HR 700A is ambient curing silicon resin used in heat and corrosion resistant coatings. Thermal stability up to 600-650 °C and corrosion protection are achieved in combination with the suitable formulations. This product is available for North America and for Japan, India, South Korea, Taiwan and China in Asia (all other countries are excluded). 收起 | Request Sample |
| DENSURF HR 800 | DKSH | DENSURF HR 800 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as alu...展开 DENSURF HR 800 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as aluminum and iron oxide pigments. This product is available for North America and for Japan, India, South Korea, Taiwan and China in Asia (all other countries are excluded). 收起 | Request Sample |
| DENSURF HR 900 | DKSH | DENSURF HR 900 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as alu...展开 DENSURF HR 900 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as aluminum and iron oxide pigments. This product is available for North America and for Japan, India, South Korea, Taiwan and China in Asia (all other countries are excluded). 收起 | Request Sample |
