| A-C 316A | DKSH | A-C 316A is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer, in finer powder form than A C 316, for use in waterborne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including ...展开 A-C 316A is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer, in finer powder form than A C 316, for use in waterborne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, helping to extend cutting machine lifetime. Its acid number of 16 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). In addition, may be used as a metal release agent for PVC processing and is a fusion control for PVC formulations. It will not affect clarity in transparent PVC applications. Very effective for use in processing PVC regrind. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 325 | DKSH | A-C 325 is a Hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion re...展开 A-C 325 is a Hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number of 25 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 400 | DKSH | A-C 400 is a Ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing appl...展开 A-C 400 is a Ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing application viscosity at melt, while providing an adhesion boost versus homopolymer, non functional diluents (FT, byproduct, thermally degraded (TD) and PE homopolymer waxes). It is completely miscible in EVA adhesive resins, as would be expected by the similar chemistry. It is also used in candles to provide paraffin crystal nucleation, which increases thermal and breakage resistance, adhesion to glass, and fragrance retention. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 400A | DKSH | A-C 400A is a Ethylene vinyl acetate (EVA) copolymer in powder form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing ap...展开 A-C 400A is a Ethylene vinyl acetate (EVA) copolymer in powder form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing application viscosity at melt, while providing an adhesion boost versus homopolymer, non functional diluents (FT, byproduct, thermally degraded (TD) and PE homopolymer waxes). It is completely miscible in EVA adhesive resins, as would be expected by the similar chemistry. It is also used in candles to provide paraffin crystal nucleation, which raises thermal and breakage resistance, adhesion to glass, and fragrance retention. Is also a dispersing agent for color masterbatch in stryenic resins. Excellent dispersing agent and process aid for EVA-based wire and cable compounds. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 405M | DKSH | A-C 405M is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 8%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available...展开 A-C 405M is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 8%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 405T | DKSH | A-C 405T is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 6%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available...展开 A-C 405T is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 6%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 540 | DKSH | A-C 540 is an ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficien...展开 A-C 540 is an ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 540A | DKSH | A-C 540A is a Ethylene acrylic acid (EAA) copolymer in a powdered form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coeffic...展开 A-C 540A is a Ethylene acrylic acid (EAA) copolymer in a powdered form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Is a dispersing agent for color masterbatch in engineering resins. Excellent external lubricant for polyamide compounds.This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 6 | DKSH | A-C 6 is a low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as...展开 A-C 6 is a low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 617 | DKSH | A-C 617 is a Low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used ...展开 A-C 617 is a Low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Is used as a dispersing agent in color masterbatch applications. In PVC applications it finds use as an external lubricant. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 617A | DKSH | A-C 617A is a low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also u...展开 A-C 617A is a low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. In PVC applications it finds use as an external lubricant. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 629 | DKSH | A-C 629 is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It can also be atmospherically emulsified for use in aqueous appli...展开 A-C 629 is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 629A | DKSH | A-C 629A is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It is a pigment dispersing agent for color masterbatch. It can al...展开 A-C 629A is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It is a pigment dispersing agent for color masterbatch. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 6A | DKSH | A-C 6A is a low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also use...展开 A-C 6A is a low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Is used as a dispersing agent in color masterbatch applications.This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| AAEM | DKSH | AAEM is a methacrylic monomer used to formulate highsolids solution acrylic resins and acrylic emulsions for lower VOC emission industrial and architectural coatings. The ability of AAEM to react with amines and hydrazides makes it an ideal monomer for se...展开 AAEM is a methacrylic monomer used to formulate highsolids solution acrylic resins and acrylic emulsions for lower VOC emission industrial and architectural coatings. The ability of AAEM to react with amines and hydrazides makes it an ideal monomer for self-crosslinkable, room temperature cure acrylic emulsions. It also finds use in acetoacetylated polymers crosslinked through chelation with metal ions and for acetoacetylated polymers for producing colorfast fibers (azo-dye). AAEM readily polymerizes with other acrylic and methacrylic monomers. Chemical name: Acetoacetoxyethyl Methacrylate. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| ACQUAMINE PD 1419_7 | DKSH | ACQUAMINE PD 1419_7 is a waterborne cycloaliphatic amine adduct epoxy curing agent designed to cure both epoxy resin emulsions and standard epoxy resins. | Request Sample |
| ACQUAMINE PD 2157_2 | DKSH | ACQUAMINE PD 2157_2 is a waterborne aliphatic amine adduct epoxy curing agent designed to cure both epoxy resin emulsions and standard epoxy resins. ACQUAMINE PD 2157_2 has the following features: Fast dry time AND Long pot life. | Request Sample |
| Acrylic Resin GA-003 | DKSH | Acrylic Resin GA-003 is a solid acrylic resin containing epoxy functionality (GMA acrylic). It is used in thermosetting powder coatings to provide excellent outdoor durability. Typical applications include automotive trim and wheel clear coat. GA-003 can ...展开 Acrylic Resin GA-003 is a solid acrylic resin containing epoxy functionality (GMA acrylic). It is used in thermosetting powder coatings to provide excellent outdoor durability. Typical applications include automotive trim and wheel clear coat. GA-003 can be used with curative like 1, 12-dodecanedioic acid (DDDA) to produce clear coating of high gloss, smoothness and clarity. Other polyacrylic acids and polyanhydrides can also be used as curatives for specific coating properties. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| ALU D10011 | DKSH | ALU D10011 are non leafing aluminum pigment in paste. They have lenticular flakes of small particle size and sparkling effects.They have high metallic effect. Its solent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, ...展开 ALU D10011 are non leafing aluminum pigment in paste. They have lenticular flakes of small particle size and sparkling effects.They have high metallic effect. Its solent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection between different particle shapes. Its main application are non-leafing aluminium high end for solvent-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| ALU D10017 | DKSH | ALU D10017 is a non leafing aluminum pigment in paste. It has lenticular flakes of small particle size and sparkling effects. It has high metallic effect. The solvent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, cre...展开 ALU D10017 is a non leafing aluminum pigment in paste. It has lenticular flakes of small particle size and sparkling effects. It has high metallic effect. The solvent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection between different particle shapes. Its main application are non-leafing aluminium high end for solvent-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| ALU D10028 | DKSH | ALU D10028 are non leafing aluminum pigment in paste. They are lenticular flakes of medium particle size and sparkling effects. They have high metallic effect. The solvent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes...展开 ALU D10028 are non leafing aluminum pigment in paste. They are lenticular flakes of medium particle size and sparkling effects. They have high metallic effect. The solvent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection between different particle shapes. Its main application are non-leafing aluminium high end for solvent-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| ALU D2034 | DKSH | ALU D2034 is a non leafing aluminum pigment in paste. They are lenticular flakes of coarse particle size and sparkling effects. Its solvents are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effe...展开 ALU D2034 is a non leafing aluminum pigment in paste. They are lenticular flakes of coarse particle size and sparkling effects. Its solvents are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection between different particle shapes. Its main application are non-leafing aluminium high end for solvent-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| ALU F4016 | DKSH | ALU F4016 is a non leafing aluminum pigment in paste. It has irregular flakes of medium particle size. Its solvent is a white spirit and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection...展开 ALU F4016 is a non leafing aluminum pigment in paste. It has irregular flakes of medium particle size. Its solvent is a white spirit and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection between different particle shapes. Its main application are non-leafing aluminium high end for solvent-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| AMPARMOR 1043 | DKSH | AMPARMOR 1043 is a uniquely engineered two-part system of microcapsules containing a patented blend of healing agent based on silicone-based resins, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating appl...展开 AMPARMOR 1043 is a uniquely engineered two-part system of microcapsules containing a patented blend of healing agent based on silicone-based resins, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. AMPARMOR 1043 is recommended for use in liquid solvent-based, and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems. This product is available in Europe, Asia Pacific and North America. 收起 | Request Sample |
| AMPARMOR 2000 | DKSH | The AMPARMOR 2000 series is a uniquely engineered microcapsule containing a patented blend of healing agent based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating...展开 The AMPARMOR 2000 series is a uniquely engineered microcapsule containing a patented blend of healing agent based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. The AMPAMOR 2000 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems. This product is available in Europe, Asia Pacific and North America. 收起 | Request Sample |
| AMPARMOR 3000 | DKSH | The AMPARMOR 3000 series is a uniquely engineered microcapsule containing a patented healing agent blend based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating ap...展开 The AMPARMOR 3000 series is a uniquely engineered microcapsule containing a patented healing agent blend based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. The AMPAMOR 3000 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, alkyd, urethane and acrylic systems. This product is available in Europe, Asia Pacific and North America. 收起 | Request Sample |
| AMPARMOR 4010 | DKSH | The AMPARMOR 4010 series is a uniquely engineered microparticle containing a patented blend of corrosion inhibitors. These microparticles are designed to extend coating durability by releasing inhibitors in response to the onset of corrosion. The AMPARMOR...展开 The AMPARMOR 4010 series is a uniquely engineered microparticle containing a patented blend of corrosion inhibitors. These microparticles are designed to extend coating durability by releasing inhibitors in response to the onset of corrosion. The AMPARMOR 4010 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems. This product is available in Europe, Asia Pacific and North America. 收起 | Request Sample |
| AOX52 | DKSH | AOX52 is a highly concentrated, free flowing powder with strong antimicrobial activities and has proved antivirus activity against Covid19. It can be added to different kinds of paints and lacquers (water based, solvent based, solvent free) as well as to ...展开 AOX52 is a highly concentrated, free flowing powder with strong antimicrobial activities and has proved antivirus activity against Covid19. It can be added to different kinds of paints and lacquers (water based, solvent based, solvent free) as well as to thermoplastic materials (PP, PE, TPU, PU, ABS, PA etc.). This product is available in China, Taiwan, Japan, South Korea, Australia, New Zealand, India, USA. 收起 | Request Sample |
| CD 1525 WH-4 | DKSH | CD 1525 WH-4 is an aluminum pigment in paste water-based. It is an aluminum flakes medium particle size. The product is stabilized with additives, water miscible solvents and emulsifier. It is used preferably for neutral or slightly basic system. CD Line ...展开 CD 1525 WH-4 is an aluminum pigment in paste water-based. It is an aluminum flakes medium particle size. The product is stabilized with additives, water miscible solvents and emulsifier. It is used preferably for neutral or slightly basic system. CD Line is composed of aluminum pigments in paste, specially treated to protect the pigment in the aqueous systems.Its main applications are leafing for coatings and inks water-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| CD 3008 WH-4 | DKSH | CD 3008 WH-4 is an aluminum pigment in paste water-based. It has aluminum flakes small particle size. The product stabilized with additives, water miscible solvents and emulsifier. Used preferably for neutral or slightly basic system. CD Line is composed...展开 CD 3008 WH-4 is an aluminum pigment in paste water-based. It has aluminum flakes small particle size. The product stabilized with additives, water miscible solvents and emulsifier. Used preferably for neutral or slightly basic system. CD Line is composed of aluminum pigments in paste, specially treated to protect the pigment in the aqueous systems. Its main applications are leafing for coatings and inks water-borne. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| CO2PURE AIR PURIFIER | DKSH | CO2PURE AIR PURIFIER is an organic Painting with Single environmental technology, cleanses and purifies air, works day and night against environmental pollution by reducing gases CO2, NOx and VOC's, its lack of smell makes it particularly suitable for pai...展开 CO2PURE AIR PURIFIER is an organic Painting with Single environmental technology, cleanses and purifies air, works day and night against environmental pollution by reducing gases CO2, NOx and VOC's, its lack of smell makes it particularly suitable for painting walls, ceilings indoors and outdoors, public places, schools, hospitals etc. This product is available in Asia. 收起 | Request Sample |
| DENSURF HR 700A | DKSH | DENSURF HR 700A is ambient curing silicon resin used in heat and corrosion resistant coatings. Thermal stability up to 600-650 °C and corrosion protection are achieved in combination with the suitable formulations. This product is available for North Ame...展开 DENSURF HR 700A is ambient curing silicon resin used in heat and corrosion resistant coatings. Thermal stability up to 600-650 °C and corrosion protection are achieved in combination with the suitable formulations. This product is available for North America and for Japan, India, South Korea, Taiwan and China in Asia (all other countries are excluded). 收起 | Request Sample |
| DENSURF HR 800 | DKSH | DENSURF HR 800 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as alu...展开 DENSURF HR 800 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as aluminum and iron oxide pigments. This product is available for North America and for Japan, India, South Korea, Taiwan and China in Asia (all other countries are excluded). 收起 | Request Sample |
| DENSURF HR 900 | DKSH | DENSURF HR 900 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as alu...展开 DENSURF HR 900 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as aluminum and iron oxide pigments. This product is available for North America and for Japan, India, South Korea, Taiwan and China in Asia (all other countries are excluded). 收起 | Request Sample |
| Dibutyl Phthalate (DBP) | Regar Chemicals Co., Ltd. | Dibutyl Phthalate (DBP) is a transparent, colorless oily liquid used in nitrocellulose and alkyd resin paints. DBP is also an excellent plasticizing agent and used especially PVC, aldolresin and ethyl cellulose. | |
| Diisobutyl Phthalate (DIBP) | Regar Chemicals Co., Ltd. | Diisobutyl Phthalate (DIBP) is a colorless transparent oily liquid used as an alternative to DBP (Dibutyl Phthalate). It is used in nitrocellulose and alkyd resin paints. | |
| Diisononyl Phthalate (DINP) | Regar Chemicals Co., Ltd. | Diisononyl Phthalate (DINP) is a transparent, colorless oily liquid. It can be used as a tensile strength and flexibility enhancing agent for nitrocellulose paints. It has a low volatility, low separability, low migration properties along with high aging ...展开 Diisononyl Phthalate (DINP) is a transparent, colorless oily liquid. It can be used as a tensile strength and flexibility enhancing agent for nitrocellulose paints. It has a low volatility, low separability, low migration properties along with high aging resistance. 收起 | |
| Dioctyl Phthalate(DOP) | Regar Chemicals Co., Ltd. | Dioctyl Phthalate(DOP) is a transparent, colorless oily liquid used to increase the flexibility and tensile strength of nitrocellulose paints. It provides good solubility for many components used in paint and has low volatility, low separability and good ...展开 Dioctyl Phthalate(DOP) is a transparent, colorless oily liquid used to increase the flexibility and tensile strength of nitrocellulose paints. It provides good solubility for many components used in paint and has low volatility, low separability and good conductance properties. 收起 | |
| DMBA | DKSH | DMBA chemical name is N-benzyl-dymethylamine. It is a chemical intermediate. Its main applications are phenolic resins, improvement of the dimensional stability, a hitachi Chem., a Hardener for composites and an aviation Mat. This Product is available ...展开 DMBA chemical name is N-benzyl-dymethylamine. It is a chemical intermediate. Its main applications are phenolic resins, improvement of the dimensional stability, a hitachi Chem., a Hardener for composites and an aviation Mat. This Product is available in Asia Pacific and Europe. 收起 | Request Sample |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| EXOCOAT™ 143 | Axcentive Sarl | EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS ...展开 EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS as well as to old coating layers. It covalently bonds with the substrate resulting in a very durable finish. It can be used as a standalone resin or might be formulated with other raw materials like white and colored pigments, organic resins, fillers, and additives. The use of water-based raw materials should be avoided. Durability is a unique feature of EXOCOAT® 143. It can sustain mechanical abrasion, and chemical attack and is UV stable. When applied at a very low layer thickness of 0.5 to 2µm it provides the surface with a protective hard coating that shows durable easy-to-clean, dirt resistance, anti-graffiti, and strong water repellency properties. It is suitable for ambient or force-cured, high-performance industrial coatings such as protective, coil, marine, and automotive. EXOCOAT® 143-based paints may be brushed, rolled, or sprayed by HVLP or airless spray. 收起 | |
| EXOCOAT™ 151A | Axcentive Sarl | EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 151B | Axcentive Sarl | EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 161 | Axcentive Sarl | EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extre...展开 EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extreme hardness (9H). Offers chemical-, scratch-, oxidation resistance, and temperature resistance over 1000°C for prolonged time. It can function as stand-alone resin at a layer thickness of 0.5 to 2 µm to form a durable finish that can be easy to clean. It bonds to substrates such as steel, aluminum, glass, and old coating layers. It can be used as conversion coating replacing Cr(VI). It may be co-formulated with the most frequently used coating ingredients from the group of pigments, fillers, resins, additives, and (co-)solvents and creates colored, super hard, or matte surfaces. EXOCOAT® 161 is highly advised to be used in aprotic solvents. It has a shelf life of 6 months. 收起 | |
| EXOCOAT™ AC | Axcentive Sarl | EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). ...展开 EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It functions as a replacement for the Cr3+ and Cr6+ based system as used in metal plating and automotive industries. It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It can also be used as micrometer-thin primers under conventional organic coatings. It can be overcoated by epoxy primer or polyurethane topcoat systems. EXOCOAT® AC is suitable for conventional low & high pressure airless and air-mixing spraying, dipping, rolling, and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ ACX-W | Axcentive Sarl | EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless ...展开 EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer for a coating system based on an epoxy coating and polyurethane topcoat. It may omit toxic chemicals and functions as a replacement for Cr3+ and Cr6+-based systems used in metal plating and aerospace industries. EXOCOAT® ACX-W is applied with conventional low-pressure and high-pressure airless and air-mix spraying, dipping, rolling and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展开 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| EXOCOAT™ Clearview | Axcentive Sarl | EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent ...展开 EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent durable easy-to-clean surface. EXOCOAT® Clearview keeps windscreens clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. Besides, it can be used to make easy-to-clean, water shedding tiles and chrome for example used in kitchens and bathrooms. 收起 | |
| EXOCOAT™ Clearview-2 | Axcentive Sarl | EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass ba...展开 EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass bathroom doors. It can be applied as such or diluted, in coatings as a monolayer to obtain a very hard and durable hydrophobic surface. EXOCOAT® Clearview-2 keeps windows clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. In bathroom glass, it makes the water run down fast and avoids water spots. 收起 | |
| EXOCOAT™ SH | Axcentive Sarl | EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pave...展开 EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pavement, walls, and stucco to get the so-called Lotus Effect. The sol-gel system deposits superhydrophobic particles on the porous substrate. EXOCOAT® SH will not form a film and as a result, the wall stays breathable. With the contact angle of 145o water droplets bounce back from the surface and will roll down immediately upon touch. Thus, the wall remains dry, and clean and will behave as an efficient barrier against water. 收起 | |
| FLUBE CA 140 | DKSH | FLUBE CA 140 is a calcium salt of polymer of naphthalenesulphonic acids condensed with formaldehyde. | Request Sample |
| FLUBE CA 140 F | DKSH | FLUBE CA 140 F is a calcium salt of polymer of naphthalenesulphonic acids condensed with formaldehyde. | Request Sample |
| FLUBE CA 40 F | DKSH | FLUBE CA 40 F is a calcium salt of polymer of naphthalenesulphonic acids condensed with formaldehyde. | Request Sample |
| FLUBE CA-40 | DKSH | FLUBE CA-40 is a calcium salt of polymer of naphthalenesulphonic acids condensed with formaldehyde. | Request Sample |
| FLUBE CR 100 F | DKSH | FLUBE CR 100 F is a sodium salt of polymer of naphthalene-sulphonic acids condensed with formaldehyde. | Request Sample |
| FLUBE OS 139 F | DKSH | FLUBE OS 139 F is a sodium salt of polymer of naphthalene-sulphonic acids condensed with formaldehyde. | Request Sample |
| FLUBE OS-39 | DKSH | FLUBE OS-39 is a sodium salt of polymer of naphthalenesulphonic acids condensed with formaldehyde. | Request Sample |
| Fumaric Acid Technical Grade | Regar Chemicals Co., Ltd. | Fumaric Acid Technical Grade is a cream-white crystalline powder with a melting point of 285 °C / 545 °F. It is mainly used in production of unsaturated polyester resins, coatings, L-Aspartic Acid, Malic Acid and many auxiliaries. | |
| GAP 1E | DKSH | GAP 1E is a leafing aluminum pigment in paste. It has irregular flakes of medium particle size. It is a solvent: Mineral spirit. GAP Line are versatile aluminum pastes and powders available in different particle sizes for leafing and non-leafing, ideal fo...展开 GAP 1E is a leafing aluminum pigment in paste. It has irregular flakes of medium particle size. It is a solvent: Mineral spirit. GAP Line are versatile aluminum pastes and powders available in different particle sizes for leafing and non-leafing, ideal for industrial applications. Its main applicaitons are aluminium leafing and non-leafing for low end (hammer effect and protective) solvent-born. This Product is available in Asia Pacific and Europe (only UK, Germany and Italy). 收起 | Request Sample |
| Gi-PW-F031 | DKSH | Gi-PW-F031 is few layers graphene powder. It presents an economic solution to increase the mechanical strengths with less dosage than current additive on polymer, resin and rubber composites applications. | Request Sample |
| GMA | DKSH | Glycidyl methacrylate (GMA) is an ester of methacrylic acid and a common monomer used in the creation of epoxy resins. While typical home epoxies contain diglycidyl ether of bisphenol A (DGEBA), glycidyl methacrylate is instead used to provide epoxy funct...展开 Glycidyl methacrylate (GMA) is an ester of methacrylic acid and a common monomer used in the creation of epoxy resins. While typical home epoxies contain diglycidyl ether of bisphenol A (DGEBA), glycidyl methacrylate is instead used to provide epoxy functionalization to polyolefins and other acrylate resins. Glycidyl methacrylate is produced by several companies worldwide, including Dow Chemical. This product is available in Europe and Asia. 收起 | Request Sample |
| GMA 97 | DKSH | Glycidyl methacrylate (GMA 97) is an ester of methacrylic acid and a common monomer used in the creation of epoxy resins. While typical home epoxies contain diglycidyl ether of bisphenol A (DGEBA), glycidyl methacrylate is instead used to provide epoxy fu...展开 Glycidyl methacrylate (GMA 97) is an ester of methacrylic acid and a common monomer used in the creation of epoxy resins. While typical home epoxies contain diglycidyl ether of bisphenol A (DGEBA), glycidyl methacrylate is instead used to provide epoxy functionalization to polyolefins and other acrylate resins. Glycidyl methacrylate is produced by several companies worldwide, including Dow Chemical. This product is available in Europe and Asia. 收起 | Request Sample |
| Graphene Nanoplatelets | DKSH | Graphene is an allotrope of carbon whose structure is a single planar sheet of sp2 bonded carbon atoms that are densely packed in a honeycomb crystal lattice. Graphene Nanoplatelets are reduced graphene layers.This product is available in Europe, Asia and...展开 Graphene is an allotrope of carbon whose structure is a single planar sheet of sp2 bonded carbon atoms that are densely packed in a honeycomb crystal lattice. Graphene Nanoplatelets are reduced graphene layers.This product is available in Europe, Asia and North America. 收起 | Request Sample |
| HARDLEN 13LP | DKSH | HARDLEN 13LP is a resin grafted with Chlorine (CPO), which has good adhesion power to Polyolefins without any surface treatment. HARDLEN 13LP main characteristics are: excellent Adhesion Promoter to plastics without any surface treatment such as corona or...展开 HARDLEN 13LP is a resin grafted with Chlorine (CPO), which has good adhesion power to Polyolefins without any surface treatment. HARDLEN 13LP main characteristics are: excellent Adhesion Promoter to plastics without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN 13LP main applications is adhesive for Polyolefins, Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN 15LP | DKSH | HARDLEN 15LP is a resin grafted with Chlorine (CPO) which has good adhesion power to Polyolefins without any surfase treatment. HARDLEN 15LP main characteristics are: ecellent Adhesion Promoter without any surface treatment such as corona or flame. Availa...展开 HARDLEN 15LP is a resin grafted with Chlorine (CPO) which has good adhesion power to Polyolefins without any surfase treatment. HARDLEN 15LP main characteristics are: ecellent Adhesion Promoter without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN 15LP main applications are: gravure and printing ink, hot-stamping ink Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN CY1321P | DKSH | HARDLEN CY1321P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY1321P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolef...展开 HARDLEN CY1321P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY1321P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any C14surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN CY1321P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN CY2321P | DKSH | HARDLEN CY2321P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY2321P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolef...展开 HARDLEN CY2321P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY2321P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN CY2321P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN CY2329 | DKSH | HARDLEN CY2329 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY2329 main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefin...展开 HARDLEN CY2329 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY2329 main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. HARDLEN CY2329 main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN CY9122P | DKSH | HARDLEN CY9122P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY9122P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolef...展开 HARDLEN CY9122P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY9122P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN CY9122P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN CY9124P | DKSH | HARDLEN CY9124P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY9124P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolef...展开 HARDLEN CY9124P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY9124P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN CY9124P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN DX523P | DKSH | HARDLEN DX523P is a resin grafted with Chlorine which has good adhesion power to Polyolefins without any surfase treatment. HARDLEN DX523P main characteristics are: ecellent Adhesion Promoter to plastics without any surface treatment such as corona or fla...展开 HARDLEN DX523P is a resin grafted with Chlorine which has good adhesion power to Polyolefins without any surfase treatment. HARDLEN DX523P main characteristics are: ecellent Adhesion Promoter to plastics without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN DX523P main applications are: gravure printing ink, hot-stamping ink and UV ink to Polyolefins. Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN DX526P | DKSH | HARDLEN DX526P is a resin grafted with Chlorinewhich has good adhesion power to Polyolefins without any surfase treatment. HARDLEN DX526P main characteristics are: ecellent Adhesion Promoter to plastics without any surface treatment such as corona or flam...展开 HARDLEN DX526P is a resin grafted with Chlorinewhich has good adhesion power to Polyolefins without any surfase treatment. HARDLEN DX526P main characteristics are: ecellent Adhesion Promoter to plastics without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN DX526P main applications are: gravure printing ink, hot-stamping ink and UV ink to Polyolefins. Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN DX530P | DKSH | HARDLEN DX530P is a resin grafted with Chlorinewhich has good adhesion power to Polyolefins without any surfase treatment. HARDLEN DX530P main characteristics are: ecellent Adhesion Promoter to plastics without any surface treatment such as corona or flam...展开 HARDLEN DX530P is a resin grafted with Chlorinewhich has good adhesion power to Polyolefins without any surfase treatment. HARDLEN DX530P main characteristics are: ecellent Adhesion Promoter to plastics without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN DX530P main applications are: gravure printing ink, hot-stamping ink and UV ink to Polyolefins. Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN EH801J | DKSH | HARDLEN EH801J is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EH801J main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins...展开 HARDLEN EH801J is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EH801J main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins without any surface treatment such as corona or flame. HARDLEN EH801J main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN EW5250 | DKSH | HARDLEN EW5250 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EW5250 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins...展开 HARDLEN EW5250 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EW5250 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins without any surface treatment such as corona or flame. HARDLEN EW5250 main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN EW5515 | DKSH | HARDLEN EW5515 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EW5515 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins...展开 HARDLEN EW5515 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EW5515 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins without any surface treatment such as corona or flame. HARDLEN EW5515 main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN EZ2250 | DKSH | HARDLEN EZ2250 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EZ2250 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins...展开 HARDLEN EZ2250 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EZ2250 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins without any surface treatment such as corona or flame. HARDLEN EZ2250 main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN F-225P | DKSH | HARDLEN F-225P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN F-225P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefin...展开 HARDLEN F-225P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN F-225P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN F225P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN F2P | DKSH | HARDLEN F2P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN F2P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins with...展开 HARDLEN F2P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN F2P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN F2P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN F6P | DKSH | HARDLEN F6P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN F6P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins with...展开 HARDLEN F6P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN F6P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN F6P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN NZ1004 | DKSH | HARDLEN NZ1004 is a chlorine free resin grafted with C Maleic anhydride, which has good adhesion power to Polyolefins or plastics without any surfase treatment. HARDLEN NZ1004 main characteristics are: ecellent Adhesion Promoter to Clorinated Polyolefins ...展开 HARDLEN NZ1004 is a chlorine free resin grafted with C Maleic anhydride, which has good adhesion power to Polyolefins or plastics without any surfase treatment. HARDLEN NZ1004 main characteristics are: ecellent Adhesion Promoter to Clorinated Polyolefins without any surface treatment such as corona or flame. HARDLEN NZ1004 main applications are: Vehicles for gravure printing ink, hot-stamping ink and UV ink to Polyolefins. Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN NZ1015 | DKSH | HARDLEN NZ1015 is a chlorine free resin grafted with C Maleic anhydride, which has good adhesion power to Polyolefins or plastics without any surfase treatment. HARDLEN NZ1015 main characteristics are: ecellent Adhesion Promoter to Clorinated Polyolefins ...展开 HARDLEN NZ1015 is a chlorine free resin grafted with C Maleic anhydride, which has good adhesion power to Polyolefins or plastics without any surfase treatment. HARDLEN NZ1015 main characteristics are: ecellent Adhesion Promoter to Clorinated Polyolefins without any surface treatment such as corona or flame. HARDLEN NZ1015 main applications are: Vehicles for gravure printing ink, hot-stamping ink and UV ink to Polyolefins. Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| IAAC | DKSH | IAAC is used in solvent-based formulas of automotive, industrial and wood paints and thinner formulations. In paint formulas, IAAC is an excellent active solvent, of medium evaporation rate in most acrylic, cellulose (nitro, CAB), epoxy, polyester, polyur...展开 IAAC is used in solvent-based formulas of automotive, industrial and wood paints and thinner formulations. In paint formulas, IAAC is an excellent active solvent, of medium evaporation rate in most acrylic, cellulose (nitro, CAB), epoxy, polyester, polyurethane resins and hybrid systems. It reduces the evaporation rates of the systems, which allows a suitable balance of solvency and guarantees the presence of the active solvent during drying. It also acts as an aid in the elimination of blush, preventing the bleaching of paints after application in very wet environments. It finds use in original automotive, refinishing paints, lacquers and thinners, in combination with slower evaporation solvents, like butyl glycol acetate, ethyl glycol acetate and butyl glycol. IAAC has high electrical resistivity, acting as a conductivity regulator, which contributes toward improving the performance and deposition characteristics of solvent-based paints applied electrostatically. In formulas of paints for wood, IAAC provides a film with excellent leveling and sheen characteristics. Chemical name: Isopentyl Acetate, Acetic Amyl Ester. Molecular formula: CH3COO (CH2)2CH (CH3)2. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| IONPURE | DKSH | IONPURE is a soluble glass containing anti-microbial metal ions. It maintains the transparency when added to PP, PVC, PC, ABS, PC. It exhibits a high heat resistance and high performance at low concentration. IONPURE is not discolored by compounding and w...展开 IONPURE is a soluble glass containing anti-microbial metal ions. It maintains the transparency when added to PP, PVC, PC, ABS, PC. It exhibits a high heat resistance and high performance at low concentration. IONPURE is not discolored by compounding and with age, as it can control the speed of releasing metal ions. It is suitable for use in flooring materials and wallpapers. 收起 | Request Sample |
| IPDA | DKSH | IPDA is a colorless or pale yellow transparent liquid with an amine-like odor at room temperature. It is a mixture of two stero-isomers of 3-aminomethyl-3,5,5-trimethylcyclohe-xylamine. IPDA is a cycloalifatic diamine with special structure and is used in...展开 IPDA is a colorless or pale yellow transparent liquid with an amine-like odor at room temperature. It is a mixture of two stero-isomers of 3-aminomethyl-3,5,5-trimethylcyclohe-xylamine. IPDA is a cycloalifatic diamine with special structure and is used in all typical reactions of this kind of amine functional chemicals. It is widely miscible with a full range of alifatic, aromatic and halogenated solvents of different polarity. Chemical description: 3-aminomethyl-3,5,5-trimethylcyclohexylamine. This product is available in Europe and Korea. 收起 | Request Sample |
