| Advantage™ AM1512A | Ashland | Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packagin...展开 Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH and it is effective in the presence of many surfactants. Advantage™ AM1512A foam control agent is readily dispersible, has an outstanding long-term foam control persistency, and Advantage™ AW8176 defoamer is readily dispersible, has very good long-term persistency, and it is recommended for architectural paints, emulsions plasters, pigment/filler slurries, as well as industrial wood coatings. 收起 | |
| Aquaflow™ NHS-300 | Ashland | Aquaflow™ NHS-300 is a rheology modifier for waterborne architectural coatings. A solvent-free, nonionic associative polymer solution designed to increase high-shear viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NHS-350 | Ashland | Aquaflow™ NHS-350 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| Aquaflow™ NHS-355 | Ashland | Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development...展开 Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build, and favorable brush drag. As an APEO-free and solvent-free product, Aquaflow™ NHS-355 rheology modifier is recommended for low VOC formulations. It is supplied as a low viscosity liquid for ease of handling. The performance of the product is independent of paint pH 收起 | |
| Aquaflow™ NHS-360 | Ashland | Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener prov...展开 Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener provides highly efficient ICI viscosity development, excellent film build, optimal flow and leveling and favorable brush drag. 收起 | |
| Aquaflow™ NLS-200 | Ashland | Aquaflow™ NLS-200 is a rheology modifier for waterborne architectural coatings. A nonionic associative polymer solution designed to build stormer viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 is a nonionic associative polymer solution designed to increase Stormer consistency and provide superior flow and leveling in waterborne paints and coatings. | |
| Aquaflow™ NLS-220 | Ashland | Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including v...展开 Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including vinyl acrylics, ethylene vinyl acetates, alkyd emulsions and in particular pure acrylics and styrene acrylics. It rapidly equilibrates to target low- or mid-shear viscosity with no negative impact on gloss or color stability. 收起 | |
| Aquaflow™ NMS-450 | Ashland | Aquaflow™ NMS-450 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. | |
| Aquaflow™ NMS-460E | Ashland | Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of S...展开 Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as the sole thickener in many paint formulation based on hydrophobic resins, such as acrylics and styrene acrylics. With more hydrophilic resins, such as vinyl acetate ethylene (VAE), optimized rheology may be achieved with Aquaflow™ NMS-460E rheology modifier alone or in combination with a supplemental KU driver. 收起 | |
| Aquaflow™ XLS-500 | Ashland | Aquaflow™ XLS-500 is non-ionic synthetic associative rheology modifier for low-VOC acrylic based paints & coatings. | |
| Aquaflow™ XLS-525 | Ashland | Aquaflow™ XLS-525 is a non-ionic synthetic associative rheology modifier for low-VOC paints and coatings. | |
| Aquaflow™ XLS-530 | Ashland | Aquaflow™ XLS-530 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| Culminal™ C-types modified cellulose ethers | Ashland | Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plas...展开 Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plasters, fillers, adhesives and spackling compounds, cement and lime based plasters, tile cements and similar products. 收起 | |
| Dextrol™ OC-110 | Ashland | Dextrol™ OC-110 is the free-acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-15 | Ashland | Dextrol™ OC-15 is the free acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-180 | Ashland | 它是一种乙氧基化脂肪醇磷酸酯的中和态（钾盐）。它设计用于为水性乳胶漆改善光泽度和颜色接受性 | |
| Dextrol™ OC-180HS Phosphate Ester Surfactant | Ashland | Dextrol™ OC-180HS表面活性剂是乙氧基脂肪醇磷酸酯的中和（钠盐）形式。它设计用于改善光泽度和在水性乳胶漆中的色彩接受度。根据配方的不同特点，这款产品还可以用作有助于减少颜料凝絮的补充分散剂。除了在乳胶漆中使用，Dextrol™ OC-180HS表面活性剂还可以提供普遍着色特性，有助于分散和稳定颜料，从而改善水基油漆的色彩接受度。 | |
| Dextrol™ OC-50 | Ashland | Dextrol™ OC-50 is the neutralized (sodium salt) form of a nonyl phenol ethoxylated phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. | |
| Dextrol™ OC-60 | Ashland | Dextrol™ OC-60 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-60EP | Ashland | Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...展开 Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-60EP surfactant can be neutralized using several organic or inorganic bases. Dextrol OC-60EP surfactant also imparts improved gloss and color acceptance in waterborne latex paints. 收起 | |
| Dextrol™ OC-70 | Ashland | Dextrol™ OC-70 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-70EP | Ashland | Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...展开 Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-70EP phosphate ester surfactant can be neutralized by the user using a number of organic or inorganic bases. 收起 | |
| Dibutyl Phthalate (DBP) | Regar Chemicals Co., Ltd. | Dibutyl Phthalate (DBP) is a transparent, colorless oily liquid used in nitrocellulose and alkyd resin paints. DBP is also an excellent plasticizing agent and used especially PVC, aldolresin and ethyl cellulose. | |
| Diisobutyl Phthalate (DIBP) | Regar Chemicals Co., Ltd. | Diisobutyl Phthalate (DIBP) is a colorless transparent oily liquid used as an alternative to DBP (Dibutyl Phthalate). It is used in nitrocellulose and alkyd resin paints. | |
| Diisononyl Phthalate (DINP) | Regar Chemicals Co., Ltd. | Diisononyl Phthalate (DINP) is a transparent, colorless oily liquid. It can be used as a tensile strength and flexibility enhancing agent for nitrocellulose paints. It has a low volatility, low separability, low migration properties along with high aging ...展开 Diisononyl Phthalate (DINP) is a transparent, colorless oily liquid. It can be used as a tensile strength and flexibility enhancing agent for nitrocellulose paints. It has a low volatility, low separability, low migration properties along with high aging resistance. 收起 | |
| Dioctyl Phthalate(DOP) | Regar Chemicals Co., Ltd. | Dioctyl Phthalate(DOP) is a transparent, colorless oily liquid used to increase the flexibility and tensile strength of nitrocellulose paints. It provides good solubility for many components used in paint and has low volatility, low separability and good ...展开 Dioctyl Phthalate(DOP) is a transparent, colorless oily liquid used to increase the flexibility and tensile strength of nitrocellulose paints. It provides good solubility for many components used in paint and has low volatility, low separability and good conductance properties. 收起 | |
| Drewplus* L-3500 Foam Control Agent | Ashland | Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spr...展开 Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spray, air mix or HVLP. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. 收起 | |
| Drewplus™ L-3510 Foam Control Agent | Ashland | Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatib...展开 Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. 收起 | |
| Drewplus™ TS-4384 Foam Control Agent | Ashland | Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-glos...展开 Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss acrylic architectural paints, water- based parquet lacquers. Excellent results have also been obtained in acrylic anti- corrosive primers, flexographic printing inks and water-reducible alkyd based systems. Drewplus™ TS-4384 foam control agent is highly efficient and exhibits excellent persistency. 收起 | |
| Drewplus™ TS-4481 Foam Control Agent | Ashland | Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and c...展开 Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and compatibility. Since it functions as an air release agent it is particularly effective on microfoam in spray-applied industrial coatings. 收起 | |
| EMULTEX™ FR 728 | Synthomer | EMULTEX™ FR 728 is a specially colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion developed for formulation of water-borne intumescent coatings. EMULTEX™ FR 728 provides a quick char formation with high expansion factor. EMULTEX™ FR 7...展开 EMULTEX™ FR 728 is a specially colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion developed for formulation of water-borne intumescent coatings. EMULTEX™ FR 728 provides a quick char formation with high expansion factor. EMULTEX™ FR 728 is designed for intumescent coatings for fire protection up to R60. 收起 | |
| EMULTEX™ FR 797 | Synthomer | EMULTEX™ FR 797 is a specially colloid stabilised and vinyl acetate - vinyl versatate copolymer dispersion developed for formulation of waterborne intumescent coatings. EMULTEX™ FR 797 provides a slow char formation with medium expansion factor. EMULTEX™ ...展开 EMULTEX™ FR 797 is a specially colloid stabilised and vinyl acetate - vinyl versatate copolymer dispersion developed for formulation of waterborne intumescent coatings. EMULTEX™ FR 797 provides a slow char formation with medium expansion factor. EMULTEX™ FR 797 is recommended for intumescent coatings with fire protection up to 120min. 收起 | |
| EMULTEX™ VV 676 | Synthomer | EMULTEX™ VV 676 is a medium particle size, colloid stabilized aqueous dispersion of a vinyl acetate - vinyl versatate - acrylate copolymer. EMULTEX™ VV 676 offers high scrub resistance, high exterior durabillity and good low temperature film forming prope...展开 EMULTEX™ VV 676 is a medium particle size, colloid stabilized aqueous dispersion of a vinyl acetate - vinyl versatate - acrylate copolymer. EMULTEX™ VV 676 offers high scrub resistance, high exterior durabillity and good low temperature film forming properties. EMULTEX™ VV 676 is recommended for a broad range of interior and exterior masonry coatings. 收起 | |
| EMULTEX™ VV 679 | Synthomer | EMULTEX™ VV 679 is a medium particle size, colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion. EMULTEX™ VV 679 offers high scrub resistance and high gloss. EMULTEX™ VV 679 is recommended for matt and silk wall paints and also can be u...展开 EMULTEX™ VV 679 is a medium particle size, colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion. EMULTEX™ VV 679 offers high scrub resistance and high gloss. EMULTEX™ VV 679 is recommended for matt and silk wall paints and also can be used in ready mixed fillers and ceramic tile adhesives. 收起 | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| Fumaric Acid Technical Grade | Regar Chemicals Co., Ltd. | Fumaric Acid Technical Grade is a cream-white crystalline powder with a melting point of 285 °C / 545 °F. It is mainly used in production of unsaturated polyester resins, coatings, L-Aspartic Acid, Malic Acid and many auxiliaries. | |
| GENGLAZE® EC-2447 | Synthomer | GENGLAZE® EC-2447 is a heat-activated in-mold coating designed to enhance the surface of molded parts. GENGLAZE® EC-2447 in-mold coating surface finish is incorporated during compression molding instead of being applied separately. It is environmentally f...展开 GENGLAZE® EC-2447 is a heat-activated in-mold coating designed to enhance the surface of molded parts. GENGLAZE® EC-2447 in-mold coating surface finish is incorporated during compression molding instead of being applied separately. It is environmentally friendly as it does not contain solvents (100% solids), and reduces the number of surface finishing steps and manufacturing costs. 收起 | |
| HYDRO PLIOLITE™ 050 | Synthomer | HYDRO PLIOLITE™ 050 is an acrylate copolymer based on our ABS (Amphoteric Binding System) technology, contains anionic and cationic groups. Blocks many stains, including tannin, marker, and water stains. HYDRO PLIOLITE™ 050 water-based resin was designed ...展开 HYDRO PLIOLITE™ 050 is an acrylate copolymer based on our ABS (Amphoteric Binding System) technology, contains anionic and cationic groups. Blocks many stains, including tannin, marker, and water stains. HYDRO PLIOLITE™ 050 water-based resin was designed for low VOC stain blocking primers. 收起 | |
| HYDRO PLIOLITE™ 211 | Synthomer | HYDRO PLIOLITE™ 211 is a modified styrene-acrylic copolymer dispersion developed for formulation of water-borne intumescent coatings. HYDRO PLIOLITE™ 211 has excellent water resitance that allows intumescent coatings to resist to outdoor conditions. HYDRO...展开 HYDRO PLIOLITE™ 211 is a modified styrene-acrylic copolymer dispersion developed for formulation of water-borne intumescent coatings. HYDRO PLIOLITE™ 211 has excellent water resitance that allows intumescent coatings to resist to outdoor conditions. HYDRO PLIOLITE™ 211 is designed for intumescent coatings for fire protection from R30 to R120. 收起 | |
| HYDRO PLIOLITE™ 330 | Synthomer | HYDRO PLIOLITE™ 330 is a multiphase pure acrylic copolymer dispersion designed for application on wood. HYDRO PLIOLITE™ 330 provides an excellent adhesion and enhanced film formation in adverse climatic conditions that allows formulation of weather- and s...展开 HYDRO PLIOLITE™ 330 is a multiphase pure acrylic copolymer dispersion designed for application on wood. HYDRO PLIOLITE™ 330 provides an excellent adhesion and enhanced film formation in adverse climatic conditions that allows formulation of weather- and surface-tolerant wood coatings. HYDRO PLIOLITE™ 330 is suitable for formulation of wood stains and wood trim paints. 收起 | |
| Kancide 6902 | Kimberlite Chemicals (India) Pvt. Ltd. | Kancide 6902 is an isothiozolinone based biocide that is used to preserve the wet state of aqueous formaldehyde-sensitive formulations. It is a colorless to pale yellow liquid in appearance with a mild odor. This product is VOC free and designed to provid...展开 Kancide 6902 is an isothiozolinone based biocide that is used to preserve the wet state of aqueous formaldehyde-sensitive formulations. It is a colorless to pale yellow liquid in appearance with a mild odor. This product is VOC free and designed to provide a broad activity spectrum against bacteria, yeast and molds in applications such as paints, polymer emulsions, adhesives, ceramic glazes, fillers, and sealants. 收起 | |
| Kancide 6992 | Kimberlite Chemicals (India) Pvt. Ltd. | Kancide 6992 is a colorless to pale yellow liquid in appearance with a mild odor that is used to preserve the wet state of aqueous formaldehyde-sensitive formulations. This product is designed to be used in applications such as paints, polymer emulsions, ...展开 Kancide 6992 is a colorless to pale yellow liquid in appearance with a mild odor that is used to preserve the wet state of aqueous formaldehyde-sensitive formulations. This product is designed to be used in applications such as paints, polymer emulsions, adhesives, ceramic glazes, fillers, and sealants. 收起 | |
| Kanflow 35 | Kimberlite Chemicals (India) Pvt. Ltd. | Kanflow 35 is a highly effective poly carboxylic acid pigment dispersant that is used to provide color acceptance, high reproducibility, heat stability, and a low mill base viscosity. This product is anionic, colorless to light yellow in appearance, and i...展开 Kanflow 35 is a highly effective poly carboxylic acid pigment dispersant that is used to provide color acceptance, high reproducibility, heat stability, and a low mill base viscosity. This product is anionic, colorless to light yellow in appearance, and is often used in water-based paints and coatings. 收起 | |
| Kanflow 45 | Kimberlite Chemicals (India) Pvt. Ltd. | Kanflow 45 is a highly effective poly carboxylic acid pigment dispersant that is used to provide color acceptance, high reproducibility, heat stability, and a low mill base viscosity. This product is anionic, colorless to light yellow in appearance, and i...展开 Kanflow 45 is a highly effective poly carboxylic acid pigment dispersant that is used to provide color acceptance, high reproducibility, heat stability, and a low mill base viscosity. This product is anionic, colorless to light yellow in appearance, and is often used in water-based and semi gloss paints and coatings. 收起 | |
| Kanflow 55 | Kimberlite Chemicals (India) Pvt. Ltd. | Kanflow 55 is a low-foaming poly carboxylic acid pigment dispersant that is used to disperse inorganic pigments and extenders in aqueous systems and prevent pigment flocculation. This product is anionic, colorless to light yellow in appearance, and is oft...展开 Kanflow 55 is a low-foaming poly carboxylic acid pigment dispersant that is used to disperse inorganic pigments and extenders in aqueous systems and prevent pigment flocculation. This product is anionic, colorless to light yellow in appearance, and is often used in flat to semi gloss paints and coatings. 收起 | |
| LIPATON™ SB 5521 | Synthomer | LIPATON™ SB 5521 is a finely dispersed aqueous dispersion of a carboxylated styrene-butadiene copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, APEO, solvents and plasticizers. LIPATON™ SB 5521 is a hydrop...展开 LIPATON™ SB 5521 is a finely dispersed aqueous dispersion of a carboxylated styrene-butadiene copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, APEO, solvents and plasticizers. LIPATON™ SB 5521 is a hydrophobic and elastic polymer. It is highly recommended for anti-corrosive primers and underbody coatings. 收起 | |
| LYTRON™ 180 AV | Synthomer | LYTRON™ 180 AV is an acidic un-neutralized opacifier for home and personal care products with no added preservatives. LYTRON™ 180 AV styrene acrylic copolymer opacifier for bath and shower products, including liquid hand wash and soaps, laundry detergents...展开 LYTRON™ 180 AV is an acidic un-neutralized opacifier for home and personal care products with no added preservatives. LYTRON™ 180 AV styrene acrylic copolymer opacifier for bath and shower products, including liquid hand wash and soaps, laundry detergents, and cleaners. 收起 | |
| Maleic anhydride | Regar Chemicals Co., Ltd. | Maleic anhydride is a white flake or briquette. It is the base material in unsaturated polyester resins, and used in the manufacture of a wide variety of consumer products, including paper surface coating, additives of oil products and modified alkyd resi...展开 Maleic anhydride is a white flake or briquette. It is the base material in unsaturated polyester resins, and used in the manufacture of a wide variety of consumer products, including paper surface coating, additives of oil products and modified alkyd resins. 收起 | |
| MOR-GLO™ 10 | Synthomer | MOR-GLO™ 10 is a floor finish, water-based styrene acrylic, polymer emulsion for ultra-high speed (UHS) maintenance program. MOR-GLO™ 10 provides a very repairable surface that has a high distinctness of image without compromising the abrasion, soil and s...展开 MOR-GLO™ 10 is a floor finish, water-based styrene acrylic, polymer emulsion for ultra-high speed (UHS) maintenance program. MOR-GLO™ 10 provides a very repairable surface that has a high distinctness of image without compromising the abrasion, soil and shoe scuff resistance associated with high performance floor finishes. 收起 | |
| MOR-GLO™ 2 | Synthomer | MOR-GLO™ 2 is a floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail. MOR-GLO™ 2 very hard and durable zinc crosslinked polymer provides premium performance in high traffic floor ...展开 MOR-GLO™ 2 is a floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail. MOR-GLO™ 2 very hard and durable zinc crosslinked polymer provides premium performance in high traffic floor areas. It features excellent black heel mark (BHMR), scuff and dirt resistance. 收起 | |
| MOR-GLO™ 2E | Synthomer | Mor-Glo 2E very hard and durable zinc crosslinked polymer provides premium performance in high traffic floor areas. It features excellent black heel mark (BHMR), scuff and dirt resistance. | |
| MOR-GLO™ 8 | Synthomer | MOR-GLO™ 8 is a floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail. MOR-GLO™ 8 zinc crosslinked floor finish polymer is used to make premium, well-balanced floor polishes that p...展开 MOR-GLO™ 8 is a floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail. MOR-GLO™ 8 zinc crosslinked floor finish polymer is used to make premium, well-balanced floor polishes that provide outstanding dirt resistance, reparability, and response to periodic ultra high speed maintenance. 收起 | |
| MOR-GLO™ 877 | Synthomer | MOR-GLO™ 877 is a floor finish, water-based styrene acrylic, polymer emulsion for industrial, residential and general purpose polishes with good wear resistance. MOR-GLO™ 877 general use polymer is frequently recommended for low maintenance floor finishes...展开 MOR-GLO™ 877 is a floor finish, water-based styrene acrylic, polymer emulsion for industrial, residential and general purpose polishes with good wear resistance. MOR-GLO™ 877 general use polymer is frequently recommended for low maintenance floor finishes. It can be used as sole polymer or blended with others. 收起 | |
| MOR-GLO™ G128 | Synthomer | MOR-GLO™ G128 is a zinc-free floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail. MOR-GLO™ G128 is recommended for low maintenance floor finishes. It can be easily formulated int...展开 MOR-GLO™ G128 is a zinc-free floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail. MOR-GLO™ G128 is recommended for low maintenance floor finishes. It can be easily formulated into EPA Safer Choice, Green Seal and Ecologo certifiable floor finishes. 收起 | |
| MOR-GLO™ ULTRA AR | Synthomer | MOR-GLO™ ULTRA AR is an alcohol resistant floor finish, water-based styrene acrylic, polymer emulsion for high traffic environments. MOR-GLO™ ULTRA AR provides a very durable, high gloss surface that is resistant to alcohol based hand sanitizers but that ...展开 MOR-GLO™ ULTRA AR is an alcohol resistant floor finish, water-based styrene acrylic, polymer emulsion for high traffic environments. MOR-GLO™ ULTRA AR provides a very durable, high gloss surface that is resistant to alcohol based hand sanitizers but that still retains the reparability and removability of one-component floor finish. 收起 | |
| MOR-GLO™ ULTRA G | Synthomer | MOR-GLO™ ULTRA G is a zinc-free Twin-Linked™, water-based styrene acrylic, polymer emulsion for low or high maintenance floor polish formulations. MOR-GLO™ ULTRA G zinc-free polymer delivers the durability and performance of premium zinc-containing finish...展开 MOR-GLO™ ULTRA G is a zinc-free Twin-Linked™, water-based styrene acrylic, polymer emulsion for low or high maintenance floor polish formulations. MOR-GLO™ ULTRA G zinc-free polymer delivers the durability and performance of premium zinc-containing finishes. It is crosslinked using SYNTHOMER Solutions' Twin-Linked™ technology to deliver premium durability and performance. 收起 | |
| MOR-SHINE™ 4U | Synthomer | MOR-SHINE™ 4U is a general purpose and cost effective floor polish concentrate. MOR-SHINE™ 4U dry-bright polish concentrate with excellent gloss retention, as well as mar and scratch resistance, is used for general purpose finishes that respond to low and...展开 MOR-SHINE™ 4U is a general purpose and cost effective floor polish concentrate. MOR-SHINE™ 4U dry-bright polish concentrate with excellent gloss retention, as well as mar and scratch resistance, is used for general purpose finishes that respond to low and high maintenance schedules. 收起 | |
| MOR-SHINE™ E | Synthomer | Mor-Shine E is a dry-bright polish concentrate with excellent gloss retention, as well as mar and scratch resistance. Mor-Shine E is used for general purpose finishes that respond to low and high maintenance schedules | |
| MOR-SHINE™ ULTRA CSG | Synthomer | MOR-SHINE™ ULTRA CSG is a concentrated surface protectant for use on polished or decorative concrete surfaces. MOR-SHINE™ ULTRA CSG penetrates into functional concrete surfaces and provides excellent durability and protection from stains and abrasion. | |
| Natrosol™ 250 Hydroxyethylcellulose | Ashland | Natrosol™ 250 Hydroxyethylcellulose is a nonionic water-soluble cellulose ether. | |
| Natrosol™ B Hydroxyethylcellulose | Ashland | Natrosol™ B HEC，非离子型水溶性聚合物，是一种白色，自由流动的粒状粉末。它不溶于有机溶剂，但它很容易分散在冷水和热水中，得到不同粘度的溶液。此产品被用作增稠剂，保护胶体，基料，稳定剂和助悬剂，特别是应用于的需要非离子型材料的场合。 | |
| Natrosol™ FPS | Ashland | Natrosol™ FPS has high solids liquid suspensions designed for easy handling in conventional paint manufacturing equipment. | |
| Natrosol™ FPS Plus 330 | Ashland | Natrosol™ FPS Plus 330 is a aqueous dispersions of cellulosic water-soluble polymers for use as latex paint thickeners. | |
| Natrosol™ Hydroxyethylcellulose | Ashland | Natrosol™ Hydroxyethylcellulose is a nonionic water-soluble polymer derived from cellulose and its solutions are unaffected by cations. It dissolves readily in cold or hot water and is used to produce solutions having a wide range of viscosity. | |
| Natrosol™ Performax | Ashland | Natrosol™ hydroxyethylcellulose (HEC) 在过去的50年中始终是行业内领先的水基建筑涂料增稠剂。而现在Natrosol Performax HEC允许涂料生产商在涂料生产的任意时间点添加干燥形式的HEC而不会产生结块，这一特性将涂料制造过程中的灵活性和产品质量带到了一个史无前例的水平。 | |
| Natrosol™ Plus | Ashland | Natrosol™ Plus is a associative cellulosic polymer designed specifically for use in latex paints. | |
| Natrosol™ Plus 330 HMHEC | Ashland | Natrosol™ Plus 330 hydrophobically modified hydroxyethylcellulose (HMHEC) is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer that contains both hydroxyethyl and long-chain alkyl group...展开 Natrosol™ Plus 330 hydrophobically modified hydroxyethylcellulose (HMHEC) is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer that contains both hydroxyethyl and long-chain alkyl groups. This unique dual substitution differentiation this rheology modifier from unmodified cellulosics. 收起 | |
| Natrosol™ Plus 550 HMHEC | Ashland | Natrosol™ Plus 550 hydrophobically modified hydroxyethylcellulose (HMHEC) is a highly efficient, nonionic associative cellulosic polymer developed to provide rheology control of latex paints. Natrosol™ Plus 550 exhibits excellent enzyme resistance and imp...展开 Natrosol™ Plus 550 hydrophobically modified hydroxyethylcellulose (HMHEC) is a highly efficient, nonionic associative cellulosic polymer developed to provide rheology control of latex paints. Natrosol™ Plus 550 exhibits excellent enzyme resistance and imparts excellent creamy in-can feel and smooth flow characteristics to water-based latex paints and coatings. 收起 | |
| pHLEX™ 100 | Ashland | pHLEX™ 100 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designe...展开 pHLEX™ 100 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designed to replace ammonium hydroxide and other organoamine pH neutralizers. Significant odor reduction of the final paint formulation it typically achieved through the use of pHLEX™ 100 neutralizing agent, particularly when used in place of ammonium hydroxide. 收起 | |
| pHLEX™ 110 | Ashland | pHLEX™ 110 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designe...展开 pHLEX™ 110 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designed to replace ammonium hydroxide and other organoamine pH neutralizers. Significant odor reduction of the final paint formulation it typically achieved through the use of pHLEX™ 110 neutralizing agent, particularly when used in place of ammonium hydroxide. 收起 | |
| Phthalic Anhydride (PA) | Regar Chemicals Co., Ltd. | Phthalic Anhydride (PA) is an organic, white flake or crystal powder. This raw material may be used to produce PVC plasticizer, polyester resin, alkyd resin, dye, paint and medicine. | |
| PLEXTOL™ A 6474 | Synthomer | PLEXTOL™ A 6474 is an aqueous dispersion of an acrylic copolymer with heterogeneous particle morphology. PLEXTOL™ A 6474 is a binder for exterior and interior clear or pigmented wood coatings. | |
| PLEXTOL™ B 500 | Synthomer | PLEXTOL B 500 is a pure acrylic with an excellent shear and electrolyte stability. It is highly recommended for silicone paints and artist paints. It shows high flexibility and UV-resistance. Aqueous dispersion of a non-ionic stabilized thermoplastic acry...展开 PLEXTOL B 500 is a pure acrylic with an excellent shear and electrolyte stability. It is highly recommended for silicone paints and artist paints. It shows high flexibility and UV-resistance. Aqueous dispersion of a non-ionic stabilized thermoplastic acrylic polymer. The dispersion is free from film forming aids, APEO, solvents and plasticizers. 收起 | |
| PLEXTOL™ D 498 | Synthomer | PLEXTOL™ D 498 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers. PLEXTOL™ D 498 is a low MFFT pure a...展开 PLEXTOL™ D 498 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers. PLEXTOL™ D 498 is a low MFFT pure acrylic recommended for saponification resistant exterior masonry coatings and renders. It is highly suitable for silicate coatings and renders and shows non-yellowing and excellent UV resistance. 收起 | |
| PLEXTOL™ D 507 | Synthomer | PLEXTOL™ D 507 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, plasticizers and ammonia. PLEXTOL™ D 507 is a pure a...展开 PLEXTOL™ D 507 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, plasticizers and ammonia. PLEXTOL™ D 507 is a pure acrylic recommended for industrial concrete-roof tile coatings. It shows excellent exterior durability and very high resistance against water-whitening and efflorescence. 收起 | |
| PLEXTOL™ D 512 | Synthomer | PLEXTOL™ D 512 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from APEOs, film forming aids, solvents and plasticizers. PLEXTOL™ D 512 is a pure acr...展开 PLEXTOL™ D 512 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from APEOs, film forming aids, solvents and plasticizers. PLEXTOL™ D 512 is a pure acrylic binder with excellent exterior durability and water-whitening resistance. It shows a good blocking and dirt-pick up resistance. It is recommended for high quality masonry paints including mosaic plasters. It is as well suitable for concrete roof-tile renovation paints. 收起 | |
| PLEXTOL™ D 977 | Synthomer | PLEXTOL™ D 977 is a water-based dispersion of acrylic copolymer designed for Elastomeric coatings, roof and walls. It provides a good balance between mechanical properties and dirt pick-up resistance thanks to the adjusted internal plastification and UV s...展开 PLEXTOL™ D 977 is a water-based dispersion of acrylic copolymer designed for Elastomeric coatings, roof and walls. It provides a good balance between mechanical properties and dirt pick-up resistance thanks to the adjusted internal plastification and UV surface curing system. 收起 | |
| PLEXTOL™ M 625 | Synthomer | PLEXTOL™ M 625 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system, and is free from APEO, coalescing agents, solvents, and plasticizers. PLEXTOL™ M 625 is a hard pu...展开 PLEXTOL™ M 625 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system, and is free from APEO, coalescing agents, solvents, and plasticizers. PLEXTOL™ M 625 is a hard pure acrylic with excellent UV-resistance and exterior durability. It is highly recommended for industrial concrete roof-tile and fibre-cement coatings. It shows an outstanding efflorescence and water-whitening resistance. 收起 | |
| PLEXTOL™ R 100 | Synthomer | PLEXTOL™ R 100 is a surfactant stabilised modified - acrylic copolymer dispersion that forms a flexible, tough film of high water resistance. PLEXTOL™ R 100 is recommended for exterior and interior paints. | |
| PLEXTOL™ R 5335 | Synthomer | PLEXTOL™ R 5335 is a fine particle size, surfactant stabilised aqueous acrylic copolymer dispersion. PLEXTOL™ R 5335 offers high gloss, excellent adhesion and high water resistance. PLEXTOL™ R 5335 is recommended for high performance trim paints and wood ...展开 PLEXTOL™ R 5335 is a fine particle size, surfactant stabilised aqueous acrylic copolymer dispersion. PLEXTOL™ R 5335 offers high gloss, excellent adhesion and high water resistance. PLEXTOL™ R 5335 is recommended for high performance trim paints and wood stains. 收起 | |
| PLEXTOL™ R 5441 | Synthomer | PLEXTOL™ R 5441 is a fine particle size, surfactant stabilised aqueous dispersion of a crosslinked methacrylic ester-acrylic ester copolymer. PLEXTOL™ R 5441 offers high gloss, block resistance, wet ahdesion, alkali and water resitance. PLEXTOL™ R 5441 is...展开 PLEXTOL™ R 5441 is a fine particle size, surfactant stabilised aqueous dispersion of a crosslinked methacrylic ester-acrylic ester copolymer. PLEXTOL™ R 5441 offers high gloss, block resistance, wet ahdesion, alkali and water resitance. PLEXTOL™ R 5441 is recommended for low-to-medium build wood stains and semigloss to silky matt wet room coatings. 收起 | |
| PLEXTOL™ R 5512 | Synthomer | Plextol R 5512 is a water-based pure acrylic copolymer dispersion mainly recommended for Crack bridging wall paints and highly flexible roof coatings. Plextol R 5512 provides high flexibility and expceptional water, alkali and dirt pick-up resistance. It ...展开 Plextol R 5512 is a water-based pure acrylic copolymer dispersion mainly recommended for Crack bridging wall paints and highly flexible roof coatings. Plextol R 5512 provides high flexibility and expceptional water, alkali and dirt pick-up resistance. It contributes a good balance between mechanical properties and dirt pick-up resistance thanks to the adjusted internal plastification and UV surface curing system. 收起 | |
| PLEXTOL™ R 5530 | Synthomer | PLEXTOL™ R 5530 is a fine particle size, surfactant stabilised aqueous dispersion of a crosslinked methacrylic ester-acrylic ester copolymer. PLEXTOL™ R 5530 offers good adhesion and salt spray resistance with a very good adhesion to different substrates....展开 PLEXTOL™ R 5530 is a fine particle size, surfactant stabilised aqueous dispersion of a crosslinked methacrylic ester-acrylic ester copolymer. PLEXTOL™ R 5530 offers good adhesion and salt spray resistance with a very good adhesion to different substrates. PLEXTOL™ R 5530 is recommended for anti-corrosion and Direct to Meta applications with excellent salt spray resistance and perfect adhesion to many substrates. PLEXTOL™ R 5530 is suitable also for multi-substrate primer formulations. 收起 | |
| PLEXTOL™ R 815 | Synthomer | PLEXTOL™ R 815 is a fine particle size, surfactant stabilised aqueous dispersion of a methacrylic ester-acrylic ester copolymer. PLEXTOL™ R 815 offers high gloss, block resistance, wet adhesion, alkali and water resistance. PLEXTOL™ R 815 is recommended f...展开 PLEXTOL™ R 815 is a fine particle size, surfactant stabilised aqueous dispersion of a methacrylic ester-acrylic ester copolymer. PLEXTOL™ R 815 offers high gloss, block resistance, wet adhesion, alkali and water resistance. PLEXTOL™ R 815 is recommended for gloss paints, varnishes and stains. 收起 |
