| 1,10-Phenanthroline Anhydrous | Hainan Zhongxin Chemical Co., Ltd. | 1,10-Phenanthroline Anhydrous ,synonymous with O-Phenanthroline, is a white powder that is 99% pure. It is primarily used as an analysis reagent, it can be used as an additive in the field of electroplating. | |
| 1,2-Bis(Tetrabromophthalimido) Ethane | Hainan Zhongxin Chemical Co., Ltd. | 1,2-bis(Tetrabromophthalimido) Ethane, synonymous with BT-93W and ethylene bis-(tetrabromophthalimide), is a white powder of about 5µm max that is 66.5% pure. It is primarily used as a flame retardant in plastics and paints including: HIPS, ABS, ABS/PC a...展开 1,2-bis(Tetrabromophthalimido) Ethane, synonymous with BT-93W and ethylene bis-(tetrabromophthalimide), is a white powder of about 5µm max that is 66.5% pure. It is primarily used as a flame retardant in plastics and paints including: HIPS, ABS, ABS/PC alloy, PC, LDPE and PBT. 收起 | |
| 2-(4,6-Bis-(2,4-Dimethylphenyl)-1,3,5-Triazin-2-Yl)-5-(Octylox Y)-Phenyl (UV-0) | Hainan Zhongxin Chemical Co., Ltd. | 2-(4,6-Bis-(2,4-Dimethylphenyl)-1,3,5-Triazin-2-Yl)-5-(Octylox Y)-Phenyl (UV-0) is a yellow to white crystalline powder that is 99% pure. It is primarily used as a light stabilizer, this product is an efficient UV radiation absorbing agent. UV-O is recomm...展开 2-(4,6-Bis-(2,4-Dimethylphenyl)-1,3,5-Triazin-2-Yl)-5-(Octylox Y)-Phenyl (UV-0) is a yellow to white crystalline powder that is 99% pure. It is primarily used as a light stabilizer, this product is an efficient UV radiation absorbing agent. UV-O is recommended for use in polyolefine, poyvinyl chlornamee, polystyrene etc. 收起 | |
| 2–Hydroxy-4-n-octoxy-benzophenone (UV-531) | Hainan Zhongxin Chemical Co., Ltd. | 2–Hydroxy-4-n-octoxy-benzophenone (UV-531) is a light yellow needle like powder that is 99% pure. This product is a light stabilizer capable of absorbing the UV radiation of 240-340 nm wavelength. It is widely applied to PE,PVC,PP,PS,PC organic glass, pol...展开 2–Hydroxy-4-n-octoxy-benzophenone (UV-531) is a light yellow needle like powder that is 99% pure. This product is a light stabilizer capable of absorbing the UV radiation of 240-340 nm wavelength. It is widely applied to PE,PVC,PP,PS,PC organic glass, polypropylene fiber, ethylene-vinyl acetate etc. 收起 | |
| 2-Mercaptobenzothiazole | Hainan Zhongxin Chemical Co., Ltd. | 2-Mercaptobenzothiazole MBT(M) is a fast and nonpolluting accelerator suitable for rubbers and latex. It's available as either a light yellow powder or granule and can achieve good cold vulcanization when used together with a secondary accelerator such as...展开 2-Mercaptobenzothiazole MBT(M) is a fast and nonpolluting accelerator suitable for rubbers and latex. It's available as either a light yellow powder or granule and can achieve good cold vulcanization when used together with a secondary accelerator such as TMTD, TETD or DPG. It can impart anti-aging properties to vulcanized rubbers and is mainly used in the manufacturing of tires, adhesive tapes, rubber overshoes and other rubber products. 收起 | |
| 2-Mercaptobenzothiazole (Refined) | Hainan Zhongxin Chemical Co., Ltd. | 2-Mercaptobenzothiazole MBT(M) (Refined) is a fast and nonpolluting accelerator suitable for rubbers and latex. It's available as either as a light yellow powder or granule and can achieve good cold vulcanization when used together with secondary accelera...展开 2-Mercaptobenzothiazole MBT(M) (Refined) is a fast and nonpolluting accelerator suitable for rubbers and latex. It's available as either as a light yellow powder or granule and can achieve good cold vulcanization when used together with secondary accelerator such as TMTD, TETD or DPG. It can impart anti-aging properties to vulcanized rubbers and is mainly used in the manufacturing of tires, adhesive tapes, rubber overshoes and other rubber products. 2-Mercaptobenzothiazole is a refined version of 2-Mercaptobenzothiazole with a slightly higher initial M.P. count of 172.0 minimum oC. 收起 | |
| 2-(Morpholinothio)benzothiazole | Hainan Zhongxin Chemical Co., Ltd. | 2-(Morpholinothio)benzothiazole, synonymous with NOBS (MBS) is faint yellow or orange granules that are at least 95% pure. It is an after-effect quick accelerator which can increase scorching time and improve processing safety. It is primarily used as an ...展开 2-(Morpholinothio)benzothiazole, synonymous with NOBS (MBS) is faint yellow or orange granules that are at least 95% pure. It is an after-effect quick accelerator which can increase scorching time and improve processing safety. It is primarily used as an accelerator in the production rubbers and adhesives. 收起 | |
| 2,4-Bis(2,4-Dimethylphenyl)-6-(2-Hydroxy-4-Isooctyloxyphenyl )-1,3,5-Triazine (UV-9) | Hainan Zhongxin Chemical Co., Ltd. | 2,4-Bis(2,4-Dimethylphenyl)-6-(2-Hydroxy-4-Isooctyloxyphenyl )-1,3,5-Triazine (UV-9) is a light yellow crystalline powder that is 99% pure. This product is a high-efficienct UV radiation absorbing agent, capable of effectively absorbing UV radiation of 29...展开 2,4-Bis(2,4-Dimethylphenyl)-6-(2-Hydroxy-4-Isooctyloxyphenyl )-1,3,5-Triazine (UV-9) is a light yellow crystalline powder that is 99% pure. This product is a high-efficienct UV radiation absorbing agent, capable of effectively absorbing UV radiation of 290-400 nm wavelength. It is applicable to paint and various plastic products, particular effective to polyvinyl chloirde, polystyrene, polyurethane and acrylic resins. 收起 | |
| 4,4'-dithiodimorpholine | Hainan Zhongxin Chemical Co., Ltd. | 4,4'-dithiodimorpholine, synonymous with DTDM and Vulcanizing Agent DTDM, is a sulphur donor vulcanizing agent for efficient vulcanization and semi-efficient vulcanization cure systems. It is a white crystline powder or granule that is primarily used in t...展开 4,4'-dithiodimorpholine, synonymous with DTDM and Vulcanizing Agent DTDM, is a sulphur donor vulcanizing agent for efficient vulcanization and semi-efficient vulcanization cure systems. It is a white crystline powder or granule that is primarily used in the production of synthetic rubbers and adhesives. 收起 | |
| 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide | Hainan Zhongxin Chemical Co., Ltd. | 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) is a white granule powder that is 99% pure. It is primarily used as an antibacterial agent, antioxidant, discoloration preventive and fireproofing agent. DOPO can also be used as a reactant for syn...展开 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) is a white granule powder that is 99% pure. It is primarily used as an antibacterial agent, antioxidant, discoloration preventive and fireproofing agent. DOPO can also be used as a reactant for synthesis of monomer and water-thinned ink compositions. 收起 | |
| Amino C Acid | Hainan Zhongxin Chemical Co., Ltd. | Amino C Acid is a grey powder with the molecular formula of C10H9NO6S2. It has an amino content of between 70 - 80 % minimum and an HPLC purity of 97%. Amino C Acid is primarily used as an intermediate in the production of reactive and direct dyes. | |
| Antimony Trioxide | Hainan Zhongxin Chemical Co., Ltd. | Antimony Trioxide is a fine white powder with a particle size of about 0.8 - 1.2um, and is 99.5% pure. It is primarily used as a flame retardant in plastics, rubber, paints, paper, textiles, and electronics. It can also be used as a catalyst, a clarifyin...展开 Antimony Trioxide is a fine white powder with a particle size of about 0.8 - 1.2um, and is 99.5% pure. It is primarily used as a flame retardant in plastics, rubber, paints, paper, textiles, and electronics. It can also be used as a catalyst, a clarifying agent for glass, an opacifier for porcelain and enamel, and a white pigment for paint. 收起 | |
| Benzoic acid | Hainan Zhongxin Chemical Co., Ltd. | Benzoic acid has many uses in the field of medicines, dye carriers, plasticizers, perfumes and food preservatives. It can also be used for improving the performance of alkyd resin coatings and in pharmaceutical and dye intermediates. | |
| Brominated Epoxy Oligomers | Hainan Zhongxin Chemical Co., Ltd. | Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excelle...展开 Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excellent thermal and light stability. 收起 | |
| Brominated Polystyrene | Hainan Zhongxin Chemical Co., Ltd. | Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(...展开 Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(nylon) ect. 收起 | |
| Cariflex™ IR0307 KU Polymer | Kraton Polymers International Ltd. | Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and se...展开 Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and sealants. 收起 | |
| Cariflex™ IR0310 KU Polymer | Kraton Polymers International Ltd. | Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and se...展开 Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and sealants. 收起 | |
| Cariflex™ IR0401 BU Latex | Kraton Polymers International Ltd. | Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Late...展开 Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Latex is used in adhesives, coatings, and sealants. 收起 | |
| Cariflex™ IR0401 SU Latex | Kraton Polymers International Ltd. | Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex ...展开 Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex is used in adhesives, coatings, and sealants. 收起 | |
| Chromic Anhydride | Hainan Zhongxin Chemical Co., Ltd. | Chromic Anhydride is a dark purplish-red flake that is insoluble in water and contains 0.15% sulphates. It is synonymous with chromium (vi) oxide and chromium trioxide and is primarily used in electroplating, wood preservation, chrome oxide green tinting,...展开 Chromic Anhydride is a dark purplish-red flake that is insoluble in water and contains 0.15% sulphates. It is synonymous with chromium (vi) oxide and chromium trioxide and is primarily used in electroplating, wood preservation, chrome oxide green tinting, catalyst and as an oxidant. 收起 | |
| Decabromodiphenyl Oxide | Hainan Zhongxin Chemical Co., Ltd. | Decabromodiphenyl Oxide (DBDPO) is a white powder with an average particle size of 3µm and contains between 82-83% Br. It is primarily used as a broad spectrum flame retardant and is widely used in the production of rubber, textile, plastics and paint. De...展开 Decabromodiphenyl Oxide (DBDPO) is a white powder with an average particle size of 3µm and contains between 82-83% Br. It is primarily used as a broad spectrum flame retardant and is widely used in the production of rubber, textile, plastics and paint. Decabromodiphenyl Oxide is recommended for use in products containing polyethylene polypropylene, ABS resins, PBT resins, and rubber. 收起 | |
| Deep Chrome Yellow | Hainan Zhongxin Chemical Co., Ltd. | Deep Chrome Yellow is ZXY-3431 color type and P.Y. 34 color index number in orange/yellow powdered form. It is for use in paint and coatings, ink, stationery, rubber and plastics. | |
| Dibenzothiazole Disulfide | Hainan Zhongxin Chemical Co., Ltd. | Dibenzothiazole Disulfide MBTS (DM) is a plasticizer and delay agent in the production of chloroprene rubbers and sealants. It is provided as a gray-white to light yellow powder or granule, it is usually used together with secondary accelerator in the syn...展开 Dibenzothiazole Disulfide MBTS (DM) is a plasticizer and delay agent in the production of chloroprene rubbers and sealants. It is provided as a gray-white to light yellow powder or granule, it is usually used together with secondary accelerator in the synthesis of polymers. 收起 | |
| Epichlorohydrin | Hainan Zhongxin Chemical Co., Ltd. | Epichlorohydrin is a clear colorless liquid with the molecular formula of CH2OCHCH2Cl, and is anywhere from 99.5% to 99.9% pure. It is primarily used for producing epoxy resin, synthetic glycerin, epichlorohydrin rubber, reinforced plastics, and electrica...展开 Epichlorohydrin is a clear colorless liquid with the molecular formula of CH2OCHCH2Cl, and is anywhere from 99.5% to 99.9% pure. It is primarily used for producing epoxy resin, synthetic glycerin, epichlorohydrin rubber, reinforced plastics, and electrical insulation products. Epichlorohydrin also can be used as solvent for cellulose ester, resin, and cellulose ether, and the raw material of plasticizers, stabilizers, surfactants, and chloroprene rubber. 收起 | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| FR-245 2,4,6-Tris-(2,4,6-tribromophenoxy)-1,3,5-triazine | Hainan Zhongxin Chemical Co., Ltd. | FR-245 is 2,4,6-Tris-(2,4,6-tribromophenoxy)-1,3,5-triazine, synonymous with Tris(Tribromophenoxy)-S-Triazine and Tris(Tribromophenyl)Cyanurate and 2,4,6-Tris-(2,4,6-Tribromophenoxy)-1,3,5-Triazine, is a flame retardant additive used in the production of ...展开 FR-245 is 2,4,6-Tris-(2,4,6-tribromophenoxy)-1,3,5-triazine, synonymous with Tris(Tribromophenoxy)-S-Triazine and Tris(Tribromophenyl)Cyanurate and 2,4,6-Tris-(2,4,6-Tribromophenoxy)-1,3,5-Triazine, is a flame retardant additive used in the production of paints and plastics. FR-245 is recommend for use in multiple products including: ABS, HIPS, PS, PBT, PP, GF+ABS, GF+PS, GF+PBT, GF+HIPS and GF+PP. 收起 | |
| FR-52 Phenoxy-terminated Carbonate oligomer of tetrabromobisphenol A (TBBPA) | Hainan Zhongxin Chemical Co., Ltd. | FR-52 Phenoxy-terminated Carbonate oligomer of tetrabromobisphenol A (TBBPA) is a white powder that contains 52% Br Content. It is primarily used as a flame retardant additive in paints and plastics. FR-52 is recommended for use in: PBT, PET, PBT/PET blen...展开 FR-52 Phenoxy-terminated Carbonate oligomer of tetrabromobisphenol A (TBBPA) is a white powder that contains 52% Br Content. It is primarily used as a flame retardant additive in paints and plastics. FR-52 is recommended for use in: PBT, PET, PBT/PET blends, PC, ABS, ABS/PC blends, Polysulfone and SAN. 收起 | |
| FR-58 Phenoxy-Terminated Carbonate Oligomer of Tetrabromobisphenol A | Hainan Zhongxin Chemical Co., Ltd. | FR-58 Phenoxy-Terminated Carbonate Oligomer of Tetrabromobisphenol A, synonymous with Carbonicdichloride, polymerwith4,4-(1-methylethylidene)bis2, 6-dibromophenol, bis(2,4,6-tribromophenyl) ester, is a white powder with a bromine content of approximately ...展开 FR-58 Phenoxy-Terminated Carbonate Oligomer of Tetrabromobisphenol A, synonymous with Carbonicdichloride, polymerwith4,4-(1-methylethylidene)bis2, 6-dibromophenol, bis(2,4,6-tribromophenyl) ester, is a white powder with a bromine content of approximately 58%. It is primarily used as a flame retardant in paints and plastics. This product is recommended for use in PBT, PET, PBT/PET blends, PC, ABS, ABS/PC blends, Polysulfone and SAN. 收起 | |
| Fumaric Acid Tech Grade | Hainan Zhongxin Chemical Co., Ltd. | Fumaric acid, synonymous with trans-1,2-ethenedicarboxylic acid, is mainly used in the manufacture of synthetic resin and glass fiber-reinforced forced plastic with excellent heat stability. It can also be used as an insulation material. | |
| Isopropylated Triphenyl Phosphate (IPPP) | Hainan Zhongxin Chemical Co., Ltd. | Isopropylated Triphenyl Phosphate (IPPP) synonymous with Isopropylated phenol phosphate and triisopropylated phenyl phosphate, is a white to yellow transparent liquid used as a flame retardant additive for paints and plastics. It is recommended for use in...展开 Isopropylated Triphenyl Phosphate (IPPP) synonymous with Isopropylated phenol phosphate and triisopropylated phenyl phosphate, is a white to yellow transparent liquid used as a flame retardant additive for paints and plastics. It is recommended for use in PVC, fiber resin, synthetic rubber, pressure oil fields. 收起 | |
| KRATON® D1101 AIM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AIM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with calcium carbonate for supply to the North American market. This product is versatile with a ...展开 KRATON® D1101 AIM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with calcium carbonate for supply to the North American market. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AIM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet dusted with amorphous silica. This product is versatile with a combination of high strength, wide ...展开 KRATON® D1101 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 ASM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ASM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range ...展开 KRATON® D1101 ASM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hard...展开 KRATON® D1101 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 AU Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AU Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet, undusted. This product is versatile with a combination of high strength, wide range of hardness, ...展开 KRATON® D1101 AU Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet, undusted. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...展开 KRATON® D1101 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, adhesives, and sealants. 收起 | |
| KRATON® D1101 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ESM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of...展开 KRATON® D1101 ESM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, adhesives, and sealants. 收起 | |
| KRATON® D1101 ET Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ET Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hard...展开 KRATON® D1101 ET Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, and sealants. 收起 | |
| KRATON® D1101 JO Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JO Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a crumb dusted with organic dusting agent. This product is versatile with a combination of high strength, wi...展开 KRATON® D1101 JO Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a crumb dusted with organic dusting agent. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JO Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1101 JSM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JSM Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide ...展开 KRATON® D1101 JSM Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JSM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1101 JU Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JU Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a undusted crumb. This product is versatile with a combination of high strength, wide range of hardness, and...展开 KRATON® D1101 JU Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a undusted crumb. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1102 JS Polymer | Kraton Polymers International Ltd. | KRATON® D1102 JS Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ra...展开 KRATON® D1102 JS Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1102 JS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1102 JSZ Polymer | Kraton Polymers International Ltd. | KRATON® D1102 JSZ Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...展开 KRATON® D1102 JSZ Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1102 JSZ Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1111 KT Polymer | Kraton Polymers International Ltd. | KRATON® D1111 KT Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosi...展开 KRATON® D1111 KT Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1111 KT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1111 KU Polymer | Kraton Polymers International Ltd. | KRATON® D1111 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low vis...展开 KRATON® D1111 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1111 KU Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1113 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1113 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted pellets. This product is versatile with a combination of high strength, low hardness, and low viscosit...展开 KRATON® D1113 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1113 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1113 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1113 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low visco...展开 KRATON® D1113 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1113 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1114 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1114 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness,...展开 KRATON® D1114 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1114 PSM Polymer | Kraton Polymers International Ltd. | KRATON® D1114 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and ...展开 KRATON® D1114 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 PSM Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1114 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1114 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1114 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1116 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1116 ES Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a porous pellet dusted with an amorphous silica. This product is versatile with a combination of high streng...展开 KRATON® D1116 ES Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a porous pellet dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1116 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1116 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1116 ESM Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a powder dusted with an amorphous silica. This product is versatile with a combination of high strength, wi...展开 KRATON® D1116 ESM Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a powder dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1116 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1117 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1117 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1117 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1117 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1118 AS Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ran...展开 KRATON® D1118 AS Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1118 ASM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ASM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of h...展开 KRATON® D1118 ASM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1118 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1118 AT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardne...展开 KRATON® D1118 AT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1118 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1118 BT Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range o...展开 KRATON® D1118 BT Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 BT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ES Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ran...展开 KRATON® D1118 ES Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ESM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of h...展开 KRATON® D1118 ESM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 ET Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ET Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardne...展开 KRATON® D1118 ET Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 ETM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ETM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and...展开 KRATON® D1118 ETM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ETM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 KT Polymer | Kraton Polymers International Ltd. | KRATON® D1118 KT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and lo...展开 KRATON® D1118 KT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 KT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 KTM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 KTM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted powder. This product is versatile with a combination of high strength, wide range of hardness, and low visco...展开 KRATON® D1118 KTM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted powder. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 KTM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1119 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1119 BT Polymer is a clear, linear triblock copolymer based on styrene asnd isoprene with a polystyrene content of 22%. It is supplied as porous pellet dusted with talc. This product is versatile with a combination of high strength, low hardness,...展开 KRATON® D1119 BT Polymer is a clear, linear triblock copolymer based on styrene asnd isoprene with a polystyrene content of 22%. It is supplied as porous pellet dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1119 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1119 PSM Polymer | Kraton Polymers International Ltd. | KRATON® D1119 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and ...展开 KRATON® D1119 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1119 PSM Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1119 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1119 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1119 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1119 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1124 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1124 BT Polymer is a clear, branched triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardnes...展开 KRATON® D1124 BT Polymer is a clear, branched triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1124 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1124 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1124 PT Polymer is a clear, branched copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity...展开 KRATON® D1124 PT Polymer is a clear, branched copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1124 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1126 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1126 PT Polymer is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity ...展开 KRATON® D1126 PT Polymer is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1126 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1152 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1152 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...展开 KRATON® D1152 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1152 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1153 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1153 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...展开 KRATON® D1153 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1153 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1153 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1153 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...展开 KRATON® D1153 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1153 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1153 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1153 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...展开 KRATON® D1153 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1153 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1155 BO Polymer | Kraton Polymers International Ltd. | KRATON® D1155 BO Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted, porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and...展开 KRATON® D1155 BO Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted, porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 BO Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1155 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1155 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...展开 KRATON® D1155 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1155 JO Polymer | Kraton Polymers International Ltd. | KRATON® D1155 JO Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and l...展开 KRATON® D1155 JO Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 JO Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1155 JOP Polymer | Kraton Polymers International Ltd. | KRATON® D1155 JOP Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and ...展开 KRATON® D1155 JOP Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 JOP Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1157 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1157 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...展开 KRATON® D1157 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1157 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1157 ETM Polymer | Kraton Polymers International Ltd. | KRATON® D1157 ETM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness,...展开 KRATON® D1157 ETM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1157 ETM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1160 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1160 BT Polymer is a clear linear triblock copolymer based on styrene and isoprene with bound styrene of 18.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, a...展开 KRATON® D1160 BT Polymer is a clear linear triblock copolymer based on styrene and isoprene with bound styrene of 18.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1160 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1161 BO Polymer | Kraton Polymers International Ltd. | KRATON® D1161 BO Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 15%. It is supplied as porous pellets dusted with Calcium Stearate. This product is versatile with a combination of high strength, low ...展开 KRATON® D1161 BO Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 15%. It is supplied as porous pellets dusted with Calcium Stearate. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 BO Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1161 BSM Polymer | Kraton Polymers International Ltd. | KRATON® D1161 BSM Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 15%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and low...展开 KRATON® D1161 BSM Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 15%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 BSM Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1161 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1161 BT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 15%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, an...展开 KRATON® D1161 BT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 15%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1161 JS Polymer | Kraton Polymers International Ltd. | KRATON® D1161 JS Polymer is a clear, linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied as dusted crumbs. This product is versatile with a combination of high strength, low hardness, and low viscosity for e...展开 KRATON® D1161 JS Polymer is a clear, linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied as dusted crumbs. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 JS Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1161 JSP Polymer | Kraton Polymers International Ltd. | KRATON® D1161 JSP Polymer is a clear, linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosi...展开 KRATON® D1161 JSP Polymer is a clear, linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 JSP Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 |
