| AEPD™ VOX 1000 Multifunctional Neutralizer | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | AEPD™ VOX 1000中和胺能帮助您调配出零VOC(< 5克/升)的涂料，并不影响涂料本身的品质。它能够实现行业标杆产品AMP的全部功能，而且几乎没有任何气味。同时，和其他低VOC氨基醇相比，AEPD™ VOX 1000更为高效。 研磨时添加AEPD™ VOX 1000中和胺能够提高研磨分散的效率并降低分散剂的使用量。它的高沸点和低汽压使它特别适合于低VOC或零VOC涂料的调配，并且几乎完全去除胺类和氨气的气味。 推荐您在研磨和中和碱溶胀型增稠剂的调漆阶段使用本产品。 | |
| ALKATERGE®-E Nonvolatile Surface Active Agent | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | ALKATERGE ® -E为不挥发性表面活性剂，极易溶解于大多数有机液体，但只有极微溶于水。即使如此， ALKATERGE ® -E在水中的浓度为0.001％ （重量） 时也会降低其表面张力至约40达因每厘米。虽然它不降低矿物油的表面张力， 在矿物油中存在0.1％即可降低其对水的界面张力。 ALKATERGE ® -E会与无机酸反应生产盐，其中一些是水溶性的，并产生稳定的泡沫。无机酸或更初级的单碱有机酸的盐，是非常有效的润湿剂。在水性体系中这类盐可将恶唑啉环逐渐水解成酰胺结构。它生成油溶性...展开 ALKATERGE ® -E为不挥发性表面活性剂，极易溶解于大多数有机液体，但只有极微溶于水。即使如此， ALKATERGE ® -E在水中的浓度为0.001％ （重量） 时也会降低其表面张力至约40达因每厘米。虽然它不降低矿物油的表面张力， 在矿物油中存在0.1％即可降低其对水的界面张力。 ALKATERGE ® -E会与无机酸反应生产盐，其中一些是水溶性的，并产生稳定的泡沫。无机酸或更初级的单碱有机酸的盐，是非常有效的润湿剂。在水性体系中这类盐可将恶唑啉环逐渐水解成酰胺结构。它生成油溶性皂与高级脂肪酸。这些盐和肥皂的润湿能力，经常可通过添加醇或二醇来增加。 ALKATERGE ® -E的盐溶液可以用作纸和纺织工业的渗透剂，并且在金属清洁剂配方中使用。 收起 | |
| ALKATERGE®-T Surface Active Agent | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | ALKATERGE®-T表面活性剂仅微溶于水。在普通室温下，ALKATERGE®-T是一种蜡状固体，它在芳香族烃类和低级醇或酮中高度可溶，可中等程度溶于脂肪族烃，并与大多数植物油混溶。在液体状态，它与几乎所有的有机液体混溶。本产品作为表面活性剂是有用的，由事实证明，即在矿物油中0.1％即可降低对水界面的表面张力约95％，或至小于2达因/厘米。 ALKATERGE®-T已用作腐蚀抑制剂，乳化剂和分散剂用于各种应用中。当适当加入到配方中时，它通常可以同时执行所有这些功能，以及其它对特定体系的针对...展开 ALKATERGE®-T表面活性剂仅微溶于水。在普通室温下，ALKATERGE®-T是一种蜡状固体，它在芳香族烃类和低级醇或酮中高度可溶，可中等程度溶于脂肪族烃，并与大多数植物油混溶。在液体状态，它与几乎所有的有机液体混溶。本产品作为表面活性剂是有用的，由事实证明，即在矿物油中0.1％即可降低对水界面的表面张力约95％，或至小于2达因/厘米。 ALKATERGE®-T已用作腐蚀抑制剂，乳化剂和分散剂用于各种应用中。当适当加入到配方中时，它通常可以同时执行所有这些功能，以及其它对特定体系的针对性功能 收起 | |
| AMP™-75 Multifunctional Neutralizer | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | AMP™-75多功能中和剂被广泛认为是一种多功能添加剂，适用于所有类型的乳胶漆。在配方中，AMP™可以作为一个功能强大的助分散剂，以防止颜料的再聚集。同时，这对涂层的整体性能有显著好处。 为了充分利用AMP™作为助分散剂，高达30％的现有分散剂固体可由AMP™等重量代替。通常的添加量，AMP对配方总重量为0.05〜0.1％。典型的配方需要0.1〜0.3％的AMP™（总配方量）以获取最佳的pH稳定性，用于缔合增稠剂中和，消除罐内腐蚀。对于闪锈的控制，需要额外的0.1〜0.2％的AMP™（总配...展开 AMP™-75多功能中和剂被广泛认为是一种多功能添加剂，适用于所有类型的乳胶漆。在配方中，AMP™可以作为一个功能强大的助分散剂，以防止颜料的再聚集。同时，这对涂层的整体性能有显著好处。 为了充分利用AMP™作为助分散剂，高达30％的现有分散剂固体可由AMP™等重量代替。通常的添加量，AMP对配方总重量为0.05〜0.1％。典型的配方需要0.1〜0.3％的AMP™（总配方量）以获取最佳的pH稳定性，用于缔合增稠剂中和，消除罐内腐蚀。对于闪锈的控制，需要额外的0.1〜0.2％的AMP™（总配方量）。 收起 | |
| AMP™-90 Multifunctional Neutralizer | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | AMP™-90多功能中和剂氨基醇是一种无色，流动的液体，具有多种用途，可用于金属加工液，油漆和涂料，锅炉水系统和个人护理产品中。它可作为胺用于树脂中和，作为助分散剂，甲醛清除剂，腐蚀抑制剂和作为原料进行合成。 | |
| AMP™-95 Multifunctional Neutralizer | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | AMP™-95 多功能中和剂是乳胶漆行业的旗舰标杆性产品。作为一款多功能胺类，AMP与其他胺相比，更能提高涂料的品质并增强涂料的性能。 AMP-95以其中和性能和多功能表现得到了全世界配方设计师的广泛信任。它可以作为一种共分散剂并为配方提供出色的涂膜性能。AMP-95带来的主要益处包括改进的pH稳定性，优异的耐擦洗性，理想的固色性能，以及更好的光泽和遮盖力。 同时，AMP共分散剂和中和胺能够减少抗冻融剂、开罐时间延长剂和分散剂的使用，从而减少涂料中所含的有机挥发物。 | |
| Cariflex™ IR0307 KU Polymer | Kraton Polymers International Ltd. | Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and se...展开 Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and sealants. 收起 | |
| Cariflex™ IR0310 KU Polymer | Kraton Polymers International Ltd. | Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and se...展开 Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and sealants. 收起 | |
| Cariflex™ IR0401 BU Latex | Kraton Polymers International Ltd. | Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Late...展开 Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Latex is used in adhesives, coatings, and sealants. 收起 | |
| Cariflex™ IR0401 SU Latex | Kraton Polymers International Ltd. | Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex ...展开 Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex is used in adhesives, coatings, and sealants. 收起 | |
| DMAMP-80™ Multifunctional Neutralizer | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | DMAMP - 80™多功能中和剂是一种中和胺，适合油漆、涂料和水处理中使用。它可以作为一种乳化剂、腐蚀抑制剂、树脂增溶剂、生产发泡体的催化剂和表面处理稳定剂，以及和化学合成的原料。 | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| FLEXITANE™ CA 6000 Specialty Coating Additive | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | FLEXITANE™ CA 6000 是一种多功能、高性能的硝基烷烃类特种涂料添加剂。通过添加该多功效的助剂，通常可以减少油漆中其它高剂量的特种助剂的使用，为实现高性能的油性漆提供有效的解决方案 | |
| KRATON® D1101 AIM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AIM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with calcium carbonate for supply to the North American market. This product is versatile with a ...展开 KRATON® D1101 AIM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with calcium carbonate for supply to the North American market. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AIM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet dusted with amorphous silica. This product is versatile with a combination of high strength, wide ...展开 KRATON® D1101 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 ASM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ASM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range ...展开 KRATON® D1101 ASM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hard...展开 KRATON® D1101 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 AU Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AU Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet, undusted. This product is versatile with a combination of high strength, wide range of hardness, ...展开 KRATON® D1101 AU Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet, undusted. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...展开 KRATON® D1101 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, adhesives, and sealants. 收起 | |
| KRATON® D1101 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ESM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of...展开 KRATON® D1101 ESM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, adhesives, and sealants. 收起 | |
| KRATON® D1101 ET Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ET Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hard...展开 KRATON® D1101 ET Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, and sealants. 收起 | |
| KRATON® D1101 JO Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JO Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a crumb dusted with organic dusting agent. This product is versatile with a combination of high strength, wi...展开 KRATON® D1101 JO Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a crumb dusted with organic dusting agent. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JO Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1101 JSM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JSM Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide ...展开 KRATON® D1101 JSM Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JSM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1101 JU Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JU Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a undusted crumb. This product is versatile with a combination of high strength, wide range of hardness, and...展开 KRATON® D1101 JU Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a undusted crumb. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1102 JS Polymer | Kraton Polymers International Ltd. | KRATON® D1102 JS Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ra...展开 KRATON® D1102 JS Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1102 JS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1102 JSZ Polymer | Kraton Polymers International Ltd. | KRATON® D1102 JSZ Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...展开 KRATON® D1102 JSZ Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1102 JSZ Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1111 KT Polymer | Kraton Polymers International Ltd. | KRATON® D1111 KT Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosi...展开 KRATON® D1111 KT Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1111 KT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1111 KU Polymer | Kraton Polymers International Ltd. | KRATON® D1111 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low vis...展开 KRATON® D1111 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1111 KU Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1113 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1113 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted pellets. This product is versatile with a combination of high strength, low hardness, and low viscosit...展开 KRATON® D1113 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1113 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1113 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1113 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low visco...展开 KRATON® D1113 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1113 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1114 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1114 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness,...展开 KRATON® D1114 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1114 PSM Polymer | Kraton Polymers International Ltd. | KRATON® D1114 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and ...展开 KRATON® D1114 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 PSM Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1114 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1114 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1114 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1116 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1116 ES Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a porous pellet dusted with an amorphous silica. This product is versatile with a combination of high streng...展开 KRATON® D1116 ES Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a porous pellet dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1116 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1116 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1116 ESM Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a powder dusted with an amorphous silica. This product is versatile with a combination of high strength, wi...展开 KRATON® D1116 ESM Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a powder dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1116 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1117 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1117 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1117 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1117 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1118 AS Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ran...展开 KRATON® D1118 AS Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1118 ASM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ASM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of h...展开 KRATON® D1118 ASM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1118 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1118 AT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardne...展开 KRATON® D1118 AT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1118 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1118 BT Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range o...展开 KRATON® D1118 BT Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 BT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ES Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ran...展开 KRATON® D1118 ES Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ESM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of h...展开 KRATON® D1118 ESM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 ET Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ET Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardne...展开 KRATON® D1118 ET Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 ETM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ETM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and...展开 KRATON® D1118 ETM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ETM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 KT Polymer | Kraton Polymers International Ltd. | KRATON® D1118 KT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and lo...展开 KRATON® D1118 KT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 KT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 KTM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 KTM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted powder. This product is versatile with a combination of high strength, wide range of hardness, and low visco...展开 KRATON® D1118 KTM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted powder. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 KTM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1119 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1119 BT Polymer is a clear, linear triblock copolymer based on styrene asnd isoprene with a polystyrene content of 22%. It is supplied as porous pellet dusted with talc. This product is versatile with a combination of high strength, low hardness,...展开 KRATON® D1119 BT Polymer is a clear, linear triblock copolymer based on styrene asnd isoprene with a polystyrene content of 22%. It is supplied as porous pellet dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1119 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1119 PSM Polymer | Kraton Polymers International Ltd. | KRATON® D1119 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and ...展开 KRATON® D1119 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1119 PSM Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1119 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1119 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1119 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1119 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1124 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1124 BT Polymer is a clear, branched triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardnes...展开 KRATON® D1124 BT Polymer is a clear, branched triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1124 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1124 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1124 PT Polymer is a clear, branched copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity...展开 KRATON® D1124 PT Polymer is a clear, branched copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1124 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1126 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1126 PT Polymer is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity ...展开 KRATON® D1126 PT Polymer is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1126 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1152 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1152 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...展开 KRATON® D1152 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1152 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1153 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1153 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...展开 KRATON® D1153 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1153 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1153 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1153 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...展开 KRATON® D1153 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1153 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1153 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1153 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...展开 KRATON® D1153 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1153 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1155 BO Polymer | Kraton Polymers International Ltd. | KRATON® D1155 BO Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted, porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and...展开 KRATON® D1155 BO Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted, porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 BO Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1155 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1155 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...展开 KRATON® D1155 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1155 JO Polymer | Kraton Polymers International Ltd. | KRATON® D1155 JO Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and l...展开 KRATON® D1155 JO Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 JO Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1155 JOP Polymer | Kraton Polymers International Ltd. | KRATON® D1155 JOP Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and ...展开 KRATON® D1155 JOP Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 JOP Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1157 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1157 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...展开 KRATON® D1157 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1157 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1157 ETM Polymer | Kraton Polymers International Ltd. | KRATON® D1157 ETM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness,...展开 KRATON® D1157 ETM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1157 ETM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1160 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1160 BT Polymer is a clear linear triblock copolymer based on styrene and isoprene with bound styrene of 18.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, a...展开 KRATON® D1160 BT Polymer is a clear linear triblock copolymer based on styrene and isoprene with bound styrene of 18.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1160 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1161 BO Polymer | Kraton Polymers International Ltd. | KRATON® D1161 BO Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 15%. It is supplied as porous pellets dusted with Calcium Stearate. This product is versatile with a combination of high strength, low ...展开 KRATON® D1161 BO Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 15%. It is supplied as porous pellets dusted with Calcium Stearate. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 BO Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1161 BSM Polymer | Kraton Polymers International Ltd. | KRATON® D1161 BSM Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 15%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and low...展开 KRATON® D1161 BSM Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 15%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 BSM Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1161 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1161 BT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 15%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, an...展开 KRATON® D1161 BT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 15%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1161 JS Polymer | Kraton Polymers International Ltd. | KRATON® D1161 JS Polymer is a clear, linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied as dusted crumbs. This product is versatile with a combination of high strength, low hardness, and low viscosity for e...展开 KRATON® D1161 JS Polymer is a clear, linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied as dusted crumbs. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 JS Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1161 JSP Polymer | Kraton Polymers International Ltd. | KRATON® D1161 JSP Polymer is a clear, linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosi...展开 KRATON® D1161 JSP Polymer is a clear, linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 JSP Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1161 JU Polymer | Kraton Polymers International Ltd. | KRATON® D1161 JU Polymer is a clear, linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied as non-dusted crumbs. This product is versatile with a combination of high strength, low hardness, and low viscosity f...展开 KRATON® D1161 JU Polymer is a clear, linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied as non-dusted crumbs. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 JU Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1161 KT Polymer | Kraton Polymers International Ltd. | KRATON® D1161 KT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low ...展开 KRATON® D1161 KT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 KT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1161 KU Polymer | Kraton Polymers International Ltd. | KRATON® D1161 KU Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and ...展开 KRATON® D1161 KU Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 KU Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1161 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1161 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low v...展开 KRATON® D1161 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1161 PTM Polymer | Kraton Polymers International Ltd. | KRATON® D1161 PTM Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted powder. This product is versatile with a combination of high strength, low hardness, and low viscosi...展开 KRATON® D1161 PTM Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted powder. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 PTM Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1162 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1162 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 43%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness,...展开 KRATON® D1162 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 43%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1162 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1162 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1162 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 43%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1162 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 43%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1162 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1163 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1163 BT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 15%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, an...展开 KRATON® D1163 BT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 15%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1163 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1163 JSP Polymer | Kraton Polymers International Ltd. | KRATON® D1163 JSP Polymer is a clear linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosit...展开 KRATON® D1163 JSP Polymer is a clear linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1163 JSP Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1163 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1163 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low v...展开 KRATON® D1163 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1163 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1163 PTM Polymer | Kraton Polymers International Ltd. | KRATON® D1163 PTM Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted powder. This product is versatile with a combination of high strength, low hardness, and low viscosi...展开 KRATON® D1163 PTM Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted powder. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1163 PTM Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1164 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1164 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 29%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1164 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 29%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1164 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1165 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1165 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1165 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1165 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1170 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1170 BT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, lo...展开 KRATON® D1170 BT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1170 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1171 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1171 PT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness,...展开 KRATON® D1171 PT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1171 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, and hot melt adhesives. 收起 | |
| KRATON® D1173 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1173 BT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 18%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness...展开 KRATON® D1173 BT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 18%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1173 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, and hot melt adhesives. 收起 | |
| KRATON® D1183 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1183 BT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, an...展开 KRATON® D1183 BT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1183 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 |
