| BLUESIL ADD 10086 | Elkem Silicones | BLUESIL ADD 10086 is a polydimethylsiloxane gum in solvent solution especially developed to obtain hammer effects in combination with thixotropic polyurethane bases. It is also suitable for use with classical, polyurethane bases, thixotropic alkyd paints ...展开 BLUESIL ADD 10086 is a polydimethylsiloxane gum in solvent solution especially developed to obtain hammer effects in combination with thixotropic polyurethane bases. It is also suitable for use with classical, polyurethane bases, thixotropic alkyd paints and silicone binders. 收起 | |
| BLUESIL ADD 11013 | Elkem Silicones | BLUESIL ADD 11013 is a polyether-modified polydimethylsiloxane for use in solventless paints and varnishes, and in water-based paints and inks. | |
| BLUESIL BP 9200 | Elkem Silicones | BLUESIL BP 9200 is a solventless alkylpolysiloxane oligomer designed to enhance durability of construction materials as formed hard adhesion repellency layer through deep penetration. | |
| BLUESIL BP 9300 | Elkem Silicones | BLUESIL BP 9300 is a solventless alkylpolysiloxane oligomer designed to enhance durability of construction materials as formed hard adhesion repellency layer through deep penetration. | |
| BLUESIL BP 9705 | Elkem Silicones | BLUESIL BP 9705 is a non ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive in various formulations for building materials. | |
| BLUESIL BP 9710 | Elkem Silicones | BLUESIL BP 9710 is an emulsion with an alkylpolysiloxane oligomer base designed to protect surfaces against moisture. This waterproofing system respects the environment since it is entirely formulated in a water base, it is free of any organic solvent and...展开 BLUESIL BP 9710 is an emulsion with an alkylpolysiloxane oligomer base designed to protect surfaces against moisture. This waterproofing system respects the environment since it is entirely formulated in a water base, it is free of any organic solvent and it does not contain ecotoxic surfactant. After it has dried on the surface, BLUESIL BP 9710 repels water and allows walls to breathe. Experience acquired over more than 40 years shows that silicone water repellents are a good answer to humidity problems in construction materials, particularly when for esthetical reasons the natural aspect of the material should be preserved. BLUESIL BP 9710 has been awarded a test certificate by CSTC (Centre Scientifique et Technique de - ): ref HD-340/133-151 on the 2006.02.20. 收起 | |
| BLUESIL BP 9800 | Elkem Silicones | BLUESIL BP 9800 is an aqueous APE-free polymethylsiloxane resin emulsion. This emulsion is designed for use in facade coatings, to optimise the balance between water repellency and water vapour permeability. | |
| BLUESIL BP 9821 | Elkem Silicones | BLUESIL BP 9821 is an aqueous APE-free polymethylsiloxane resin emulsion with low VOC content. This emulsion is designed for use in facade coatings, to optimise the balance between water repellency and water vapour permeability. | |
| BLUESIL BP 9878 | Elkem Silicones | BLUESIL BP 9878 is an aqueous polymethylsiloxane resin emulsion.This emulsion provides two fundamental properties of the silicone technology to the paint film: water repellency and permeability to water vapour. | |
| BLUESIL BP 9900 | Elkem Silicones | BLUESIL BP 9900 is a non ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive for building materials. | |
| BLUESIL BP 9920 | Elkem Silicones | BLUESIL BP 9920is anon-ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive in various formulations for building materials. | |
| BLUESIL EMUL 1803 | Elkem Silicones | BLUESIL EMUL 1803 is a non-ionic silicone emulsion containing silicone oil and resin. This emulsion is intended for mould-release of cast polyurethane elastomers. | |
| BLUESIL EMUL 269 | Elkem Silicones | BLUESIL EMUL 269 is an aqueous emulsion of an hydrogeno polysiloxane. | |
| BLUESIL EMUL 284 | Elkem Silicones | BLUESIL EMUL 284 is a slightly ionic oil-in-water type emulsion of a high viscosity a/w-hydroxydimethylpolysiloxane fluid. BLUESIL EMUL 284 is characterised by its reactivity, its outstanding stability, its lubricating power and its fabric softening prop...展开 BLUESIL EMUL 284 is a slightly ionic oil-in-water type emulsion of a high viscosity a/w-hydroxydimethylpolysiloxane fluid. BLUESIL EMUL 284 is characterised by its reactivity, its outstanding stability, its lubricating power and its fabric softening properties (textile applications). 收起 | |
| BLUESIL EMUL 3500 | Elkem Silicones | BLUESIL EMUL 3500 is a general purpose; non-ionic oil in water silicone emulsion, of a high viscosity hydroxyl terminated polysiloxane. | |
| BLUESIL EMUL 35B | Elkem Silicones | BLUESIL EMUL 35B is an oil-in-water emulsion containing 35 % silicone oil, which is diluted for use, generally in a proportion of one part of BLUESIL EMUL 35B to 20 to 200 parts of water. Its characteristics are as follows:Practically no tendency to cream...展开 BLUESIL EMUL 35B is an oil-in-water emulsion containing 35 % silicone oil, which is diluted for use, generally in a proportion of one part of BLUESIL EMUL 35B to 20 to 200 parts of water. Its characteristics are as follows:Practically no tendency to cream, neither during storage nor in use.Perfect stability in contact with hard water or zinc (i.e. in galvanized metal containers).Excellent heat stability after dilution.Very good wetting power. 收起 | |
| BLUESIL EMUL 55 | Elkem Silicones | BLUESIL EMUL 55 is a non-ionic, silicone oil-based aqueous emulsion with 35 % active material. It is mainly used as a mould-stripping agent in foundries, and also has applications in the rubber and plastics industries. Moreover, it is one of the component...展开 BLUESIL EMUL 55 is a non-ionic, silicone oil-based aqueous emulsion with 35 % active material. It is mainly used as a mould-stripping agent in foundries, and also has applications in the rubber and plastics industries. Moreover, it is one of the component elements making up polishes and cleaners for artificial leather fabrics (PVC, PUR) and furniture polishes. 收起 | |
| BLUESIL EMUL 872 | Elkem Silicones | BLUESIL EMUL 872 is a slightly anionic aqueous emulsion with a 60% dry content, for general purposes. This is a concentrated version of BLUESIL EMUL E1P. | |
| BLUESIL EMUL E1P | Elkem Silicones | BLUESIL EMUL E1P is an oil in water emulsion containing 35 % of a silicone oil. It can be used in many industries. | |
| BLUESIL EMUL E1P U1 | Elkem Silicones | BLUESIL EMUL E1P U1 is a general purpose, non-ionic, aqueous silicone emulsion. | |
| BLUESIL EMULSION 2400 | Elkem Silicones | BLUESIL EMUL 2400 is a general purpose; non-ionic oil in water silicone emulsion of a methyl-hydrogen polysiloxane. | |
| BLUESIL FLD 21625 | Elkem Silicones | BLUESIL FLD 21625is anα/ω-epoxy functionalised polydimethylsiloxane fluid. | |
| BLUESIL FLD 45 | Elkem Silicones | BLUESIL FLD 45 is a low viscosity dimethylpolysiloxane oil used to prevent floating and flooding and improve leveling of air-drying paints. | |
| BLUESIL FLD 47V1 000 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V100 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V350 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V50 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V500 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL PI 2074 | Elkem Silicones | BLUESIL PI 2074 is a cationic photoinitiator for use with epoxy resins, vinyl ethers or any other type of oligomer which polymerises cationically. It is also suited to the formulation of hybrid radical / cationic systems. | |
| BLUESIL RES 6405 | Elkem Silicones | BLUESIL RES 6405 is a 50% solids methylphenylsilicone resin in Toluene (6405) or Xylene solution (6405X). This resin is ideal for the formulation of heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6405X | Elkem Silicones | BLUESIL RES 6405X is a 50% solids methylphenylsilicone resin in Toluene (6405) or Xylene solution (6405X). This resin is ideal for the formulation of heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6406XM | Elkem Silicones | BLUESIL RES 6406XM is a 60% solids methylphenylsilicone resin in Xylene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6407 | Elkem Silicones | BLUESIL RES 6407 is a 70% solids methylphenylsilicone resin in Toluene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6482X | Elkem Silicones | BLUESIL RES 6482X is a reactive silicone resin which was developed for use in the manufacture of decorative medium temperature paints. Currently this resin is mainly used for the manufacture of air drying, temperature resistant silicone alkyd paints. It i...展开 BLUESIL RES 6482X is a reactive silicone resin which was developed for use in the manufacture of decorative medium temperature paints. Currently this resin is mainly used for the manufacture of air drying, temperature resistant silicone alkyd paints. It is also more compatible than other silicones with urea-formaldehyde, melamine-formaldehyde, epoxy, polyurethane and acrylic resins. Another use is as an additive for epoxy paints. It also improves weathering resistance. 收起 | |
| BLUESIL SP 3300 | Elkem Silicones | BLUESIL SP 3300 is a non hydrolysable silicone polyether copolymer. | |
| BLUESIL SP 3300 | Elkem Silicones | BLUESIL SP 3300 is a non hydrolysable silicone polyether copolymer. | |
| BLUESIL SP 3303 | Elkem Silicones | BLUESIL SP 3303 is a polyether modified polysiloxane. | |
| BLUESIL SP 3303 | Elkem Silicones | BLUESIL SP 3303 is a polyether modified polysiloxane. | |
| BLUESIL SP 3307 | Elkem Silicones | BLUESIL SP 3307 is a polyether modified polysiloxane. | |
| BLUESIL SP 3307 | Elkem Silicones | BLUESIL SP 3307 is a polyether modified polysiloxane. | |
| BLUESIL SP 3309 | Elkem Silicones | BLUESIL SP 3309 is a polyether modified trisiloxane. | |
| BLUESIL TCS 7001 | Elkem Silicones | BLUESIL TCS 7001 is an alkyl polysiloxane solution in solvent phase specifically developed for the waterproofing of fabrics and leathers exposed to difficult weather conditions by spraying or impregnating. | |
| BM52 | Pioneer Chemicals Co., Ltd. | BM52, in the form of a powder, is a copolymer of methacrylates that is a kind of alcohol solubility resin and can be dissolved by ethanol and other weak solvents. It has low odor, high purity, and offers better hardness and pigment dispersion, and holds ...展开 BM52, in the form of a powder, is a copolymer of methacrylates that is a kind of alcohol solubility resin and can be dissolved by ethanol and other weak solvents. It has low odor, high purity, and offers better hardness and pigment dispersion, and holds admirable adhesion on almost all nylons (PA) and metals. BM52 is widely used in coatings on special substrates, alcohol soluble inks, and eco-friendly coatings with a molecular weight of 70,000 g/mol, moisture content of equal to or less than 1.0%, and an inherent viscosity of 0.51 to 55. 收起 | |
| BM61 | Pioneer Chemicals Co., Ltd. | BM61, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic...展开 BM61, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic hydrocarbons, ketones, esters. It has good compatibility with cellulose acetate, NC, vinyl resin, and it is commonly used in UV ink formulation (OPP/BOPP film) as inert resin to reduce shrinkage and to enhance adhesion. BM61 is also broadly used in eco-friendly correction fluid, aluminum heat sealing lacquer, cardboard ink, and more. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 6.5 mgKOH/g, and an inherent viscosity of 0.20 to 0.26. 收起 | |
| BM61A | Pioneer Chemicals Co., Ltd. | BM61A, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromati...展开 BM61A, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic hydrocarbons, ketones, esters. It has good compatibility with cellulose acetate, NC, vinyl resin, plasticizer, and it is commonly used in UV ink formulation (OPP/BOPP film) as inert resin to reduce shrinkage and to enhance adhesion. BM61A is also broadly used in gravure inks, aluminum heat sealing lacquer, cardboard ink, and more. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 0.5%, and an inherent viscosity of 0.20 to 0.26. 收起 | |
| BM70 | Pioneer Chemicals Co., Ltd. | BM70, in the form of a pellet, is a copolymer of methyl methacrylate and methacrylic acid that is soluble in polar organic solvents such as ketones and esters and can be dissolved in esters (or ketones) for alcohol soluble inks and mixed solvent like abso...展开 BM70, in the form of a pellet, is a copolymer of methyl methacrylate and methacrylic acid that is soluble in polar organic solvents such as ketones and esters and can be dissolved in esters (or ketones) for alcohol soluble inks and mixed solvent like absolute ethyl alcohol. It offers good adhesion on glass, metal, plastic, and is broadly used in glass inks, metal coatings, and more. BM70 has a molecular weight of 40,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 70 mgKOH/g, and an inherent viscosity of 65.0 to 70.0. 收起 | |
| BM820 | Pioneer Chemicals Co., Ltd. | BM820, in the form of a powder, is a thermoplastic solid acrylic resin with good gloss, weather-ability, and unique hardness. It is easily soluble in numerous organic solvents such as esters, ketones, white spirit, long-chain fatty alcohol such as aromati...展开 BM820, in the form of a powder, is a thermoplastic solid acrylic resin with good gloss, weather-ability, and unique hardness. It is easily soluble in numerous organic solvents such as esters, ketones, white spirit, long-chain fatty alcohol such as aromatic hydrocarbons and isopropanol. It also has good compatibility with other film forming resins such as other acrylic resins, vinyl resins, some alkyds, and is good for applications in plastic coating and aerosol spray. BM820 has a molecular weight of 250,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.61 to 0.63. 收起 | |
| BM9A | Pioneer Chemicals Co., Ltd. | BM9A, in the form of a powder, is a polymer of iso-butyl methacrylate that offers good durability, gloss, heat resistance, pigment wettability, and high flexibility. It is easily soluble in numerous organic solvents such as high alcohol, ketones, chlorina...展开 BM9A, in the form of a powder, is a polymer of iso-butyl methacrylate that offers good durability, gloss, heat resistance, pigment wettability, and high flexibility. It is easily soluble in numerous organic solvents such as high alcohol, ketones, chlorinated solvent, esters, aromatic hydrocarbons, and white gasoline. BM9A can be used as its modifying agent, based on its good compatibility with middle/long oil alkyd resin. It is compatible with chlorinated paraffin, PVC resin, and it is applied to alkyd modified coatings, gilding material coatings (adhesive layer), metal coatings, and more. BM9A has a molecular weight of 130,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.49 to 0.52. 收起 | |
| BR 100 P | Arkema Rheology & Specialty Additives | BR 100 P is a water soluble non ionic polyurethane thickener suitable to thicken anionic and non ionic emulsions and particularly styrene acrylics, vinyl-acrylics and other copolymers. It is used in semil-gloss, interior and exterior flat emulsion paints,...展开 BR 100 P is a water soluble non ionic polyurethane thickener suitable to thicken anionic and non ionic emulsions and particularly styrene acrylics, vinyl-acrylics and other copolymers. It is used in semil-gloss, interior and exterior flat emulsion paints, anticorrosion paints and adhesives. 收起 | Request Sample |
| BR 125 NPF | Arkema Rheology & Specialty Additives | BR 125 NPF is a polyurethane associative rheology modifier which gives formulations a unique Newtonian rheological profile characterised by a low viscosity at low shear rate and a high viscosity at high shear rate. The main applications for BR 125 NPF are...展开 BR 125 NPF is a polyurethane associative rheology modifier which gives formulations a unique Newtonian rheological profile characterised by a low viscosity at low shear rate and a high viscosity at high shear rate. The main applications for BR 125 NPF are gloss emulsion paints, semi-gloss, flat dispersion paints. Formulation of anticorrosive paints or adhesives can also be based on BR 125 NPF. 收起 | Request Sample |
| CAF 2534 | Elkem Silicones | CAF 2534 is a one component silicone rubber that cures when in contact with air humidity. It is intended for use as a formulation base for the development of tie-coats in the fouling release treatment of boat hulls. | |
| Coadis™ 123 K | Arkema Rheology & Specialty Additives | Coadis™ 123 K is a synthetic dispersant based on an acrylic copolymer with an Hydrophobic character. It is a versatile dispersing agent which provides easy fillers and pigments dispersion, good storage stability and improved water resistance to water-born...展开 Coadis™ 123 K is a synthetic dispersant based on an acrylic copolymer with an Hydrophobic character. It is a versatile dispersing agent which provides easy fillers and pigments dispersion, good storage stability and improved water resistance to water-borne systems. 收起 | Request Sample |
| Coadis™ 144 A | Arkema Rheology & Specialty Additives | Coadis™ 144 A is a universal pigment dispersant which provides outstanding performance accross a broad spectrum of waterborne exterior and interior coating formulations. It exhibits excellent stability and compatibility and is designed to enable maximized...展开 Coadis™ 144 A is a universal pigment dispersant which provides outstanding performance accross a broad spectrum of waterborne exterior and interior coating formulations. It exhibits excellent stability and compatibility and is designed to enable maximized gloss potentien which providing ideal viscosity, flow and wet adhesion from flat to high gloss systems. 收起 | Request Sample |
| Coadis™ 173 | Arkema Rheology & Specialty Additives | Coadis™ 173 is a versatile polyacid dispersing agent imparting an excellent performance accross a wide range of waterborne paint formulations. It is designed for flat to semi-gloss paints, anticorrosion paints, caulks and sealants and other formulations s...展开 Coadis™ 173 is a versatile polyacid dispersing agent imparting an excellent performance accross a wide range of waterborne paint formulations. It is designed for flat to semi-gloss paints, anticorrosion paints, caulks and sealants and other formulations showing high rates of mineral pigments and requiring a limited water absorption. Also suitable for oxide pigments and more specifically zinc oxides. 收起 | Request Sample |
| Coadis™ 234 K | Arkema Rheology & Specialty Additives | Coadis™ 234 K is a synthetic versatile dispersant for waterborne systems. Its use is recommended for a wide application field, including flat to glossy dispersion paints, thick film coating and plasters, and also organic pigment pastes (e;g. carbon black ...展开 Coadis™ 234 K is a synthetic versatile dispersant for waterborne systems. Its use is recommended for a wide application field, including flat to glossy dispersion paints, thick film coating and plasters, and also organic pigment pastes (e;g. carbon black dispersion). 收起 | Request Sample |
| Coadis™ 335 A | Arkema Rheology & Specialty Additives | Coadis™ 335 A has been especially designed to quickly and efficiently disperse the pigments and fillers commonly utilized in waterborne traffic paints. | Request Sample |
| Coadis™ 3412 | Arkema Rheology & Specialty Additives | Coadis™ 3412 is an acrylic copolymer dispersing agent particularly suitable for water or glycol based titanium dioxide and iron oxides dispersions. | Request Sample |
| Coadis™ 352 N | Arkema Rheology & Specialty Additives | Coadis™ 352 N is a water-based synthetic polycarboxylate dispersant that has been specially designed to quickly and efficiently produce pigments and fillers. Coadis™ 352 N ensures the stability of the paint while not impacting drying time. | Request Sample |
| Coadis™ 615 | Arkema Rheology & Specialty Additives | Coadis™ 615 is a water-based synthetic polycarboxylate dispersant that has been specially designed for industrial coatings and reactive binder systems. | Request Sample |
| Coadis™ 790 | Arkema Rheology & Specialty Additives | Coadis™ 790 is a high molecular weight wetting and dispersing agent for water-based industrial & architectural coatings, inks and pigment concentrates. It is supplied as a solution of block copolymer with pigment anchorage groups. It is a low viscosity, n...展开 Coadis™ 790 is a high molecular weight wetting and dispersing agent for water-based industrial & architectural coatings, inks and pigment concentrates. It is supplied as a solution of block copolymer with pigment anchorage groups. It is a low viscosity, non-ionic, and APEO-, VOC- and solvent-free grade. 收起 | Request Sample |
| Coadis™ A 122 | Arkema Rheology & Specialty Additives | Coadis™ A 122 is a dispersing agent based on a carboxylated polymer and especially designed for aqueous systems containing zinc oxides. | Request Sample |
| Coadis™ BR 3 | Arkema Rheology & Specialty Additives | Coadis™ BR 3 is an acrylic copolymer dispersing agent particularly suitable for water or glycol based titanium dioxide and iron oxides dispersions. | Request Sample |
| Coadis™ BR 40 | Arkema Rheology & Specialty Additives | Coadis™ BR 40 is an acrylic copolymer dispersing agent particularly suitable for water or glycol based titanium dioxide and iron oxides dispersions. | Request Sample |
| Coadis™ BR 85 | Arkema Rheology & Specialty Additives | Coadis™ BR 85 is a unique dispersant solution deflocculation and steric stabilisation of Titanium Dioxide and other fine high value pigments. It is based on Coatex proprietary Bumper Technology™. | Request Sample |
| Coapur™ 2020 W | Arkema Rheology & Specialty Additives | Coapur™ 2020 W is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyrethane thickener designed for water based formulations. Coapur™ 2020 W can be used sole or in combination either with other polyrethane thickeners or with any type of rheo...展开 Coapur™ 2020 W is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyrethane thickener designed for water based formulations. Coapur™ 2020 W can be used sole or in combination either with other polyrethane thickeners or with any type of rheology modifiers such as acrylic or cellulosic thickeners, acting at low shear rates. Coapur™ 2020 W is a pure associative thickener. It is designed to interact strongly with the blinder of the formulation, in order to control the rheology at high shear rates. Coapur™ 2020 W helps to match the highest coating quality possible for water-based formulations. 收起 | Request Sample |
| Coapur™ 2025 | Arkema Rheology & Specialty Additives | Coapur™ 2025 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It is designed to interact stringly with the binder of the formulation, in order to control the rheology at high shear rates. | Request Sample |
| Coapur™ 2501 | Arkema Rheology & Specialty Additives | Coapur™ 2501 is a non-ionic, associative and solvent free polyurethane (HEUR) rheology modifier providing a pure Newtonian rheology to water-borne systems. Coapur™ 2501 allows to adjust selectively high shear viscosities and thus ensures excellent film bu...展开 Coapur™ 2501 is a non-ionic, associative and solvent free polyurethane (HEUR) rheology modifier providing a pure Newtonian rheology to water-borne systems. Coapur™ 2501 allows to adjust selectively high shear viscosities and thus ensures excellent film build, spatter resistance and levelling together flexibility of use. 收起 | Request Sample |
| Coapur™ 2740 | Arkema Rheology & Specialty Additives | Coapur™ 2740 is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyurethane thickener designed for water based formulations. Coapur™ 2740 can be used sole or in combination either with other polyurethane thickeners or with any type of rheolo...展开 Coapur™ 2740 is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyurethane thickener designed for water based formulations. Coapur™ 2740 can be used sole or in combination either with other polyurethane thickeners or with any type of rheology modifiers such as acrylic or cellulosic thickeners, acting at low shear rates. Coapur™ 2740 is a pure associative thickener. It is designed to interact strongly with the binder of the formulation, in order to control the rheology at high shear rates. Coapur™ 2740 helps to match the highest coating quality possible for water-based formulations. 收起 | Request Sample |
| Coapur™ 3020 | Arkema Rheology & Specialty Additives | Coapur™ 3020 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides a pure Newtonian rheology to water-borne systems. It allow to adjust selectively high shear viscosities and thus ensures ex...展开 Coapur™ 3020 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides a pure Newtonian rheology to water-borne systems. It allow to adjust selectively high shear viscosities and thus ensures excellent film build, spatter resistance and leveling together with low dosage and flexibility of use. 收起 | Request Sample |
| COAPUR™ 3020 BB | Arkema Rheology & Specialty Additives | COAPUR™ 3020 BB is a 90% bio-based HEUR thickener. It is a solvent-free and APEO free associative polyurethane thickener. It provides a Newtonian rheology to water-borne systems. It allows the adjustment of high shear viscosities and thus ensures excellen...展开 COAPUR™ 3020 BB is a 90% bio-based HEUR thickener. It is a solvent-free and APEO free associative polyurethane thickener. It provides a Newtonian rheology to water-borne systems. It allows the adjustment of high shear viscosities and thus ensures excellent film build, spatter resistance and leveling together with low dosage and flexibility of use. 收起 | Request Sample |
| Coapur™ 3025 | Arkema Rheology & Specialty Additives | Coapur™3025 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides a pure Newtonian rheology t owater-borne systems. It allow to adjust selectively high shear viscosities and thus ensures exc...展开 Coapur™3025 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides a pure Newtonian rheology t owater-borne systems. It allow to adjust selectively high shear viscosities and thus ensures excellent film build, spatter resistance and leveling together with low dosage and flexibility of use. 收起 | Request Sample |
| Coapur™ 4820 | Arkema Rheology & Specialty Additives | Coapur™ 4820 is a solvent and Alkyl Phenol Ethoxylate (APE) free polyurethane thickener designed for all types of water based formulations, especially the solvent free formulations. Coapur™ 4820 can be used sole or in combination either with other polyure...展开 Coapur™ 4820 is a solvent and Alkyl Phenol Ethoxylate (APE) free polyurethane thickener designed for all types of water based formulations, especially the solvent free formulations. Coapur™ 4820 can be used sole or in combination either with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or cellulosic thickeners. Coapur™ 4820 provides excellent coating properties due to its high associative effectiveness with every kind of binder. Coapur™ 4820 increases specifically the viscosities at medium and high shear rates in order to improve tool load, film build, levelling and brush drag. Thanks to its exclusive rheological features, Coapur™ 4820 also prevents from settling and sagging tendency in low PVC formulations. 收起 | Request Sample |
| Coapur™ 520 W | Arkema Rheology & Specialty Additives | Coapur™ 520 W is a solvent-free and APEO-free HEUR thickener. It provides a very balanced rheology profile contributing to high-shear viscosities and medium-shear viscosities. As a consequence it provides a very good leveling in satin paints and improve s...展开 Coapur™ 520 W is a solvent-free and APEO-free HEUR thickener. It provides a very balanced rheology profile contributing to high-shear viscosities and medium-shear viscosities. As a consequence it provides a very good leveling in satin paints and improve significantly spattering resistance while offering also some antisettling properties. Furthermore, it provides very good response and efficiency in VAE binders. This new polyurethane thickener could therefore easily replace the use of a combination of high-shear and low-shear thickeners. 收起 | Request Sample |
| Coapur™ 5535 | Arkema Rheology & Specialty Additives | Coapur™ 5535 is a solvent - and emission-free associative non ionic thickener designed to provide a high thickening effectiveness in water-borne coatings based on the most recent solvent-free binders (e.g. terpolymers). Coapur™ 5535 use is therefore very ...展开 Coapur™ 5535 is a solvent - and emission-free associative non ionic thickener designed to provide a high thickening effectiveness in water-borne coatings based on the most recent solvent-free binders (e.g. terpolymers). Coapur™ 5535 use is therefore very cost-effective in matt and semi-gloss dispersion paints, where properties such as in-can structure, brushability and film build are needed. 收起 | Request Sample |
| Coapur™ 6050 | Arkema Rheology & Specialty Additives | Coapur™ 6050 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). Designed for fine rheological adjustment of flat or semi-gloss paints. It is characterised by its excellent thickening at low shear ra...展开 Coapur™ 6050 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). Designed for fine rheological adjustment of flat or semi-gloss paints. It is characterised by its excellent thickening at low shear rates. 收起 | Request Sample |
| Coapur™ 817 BB | Arkema Rheology & Specialty Additives | Coapur™ 817 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or ...展开 Coapur™ 817 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or cellulosic thickeners. It increaseases specifically viscosities at medium and high shear rates in order to improve tool load, film build, leveling and brush drag. 收起 | Request Sample |
| Coapur™ 817 W | Arkema Rheology & Specialty Additives | Coapur™ 817 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or ...展开 Coapur™ 817 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or cellulosic thickeners. It increaseases specifically viscosities at medium and high shear rates in order to improve tool load, film build, leveling and brush drag. 收起 | Request Sample |
| Coapur™ 830 W | Arkema Rheology & Specialty Additives | Coapur™ 830 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or ...展开 Coapur™ 830 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or cellulosic thickeners. It increaseases specifically viscosities at medium and high shear rates in order to improve tool load, film build, leveling and brush drag. It is a 30% solids version of Coapur™ 817 W. 收起 | Request Sample |
| Coapur™ 975 W | Arkema Rheology & Specialty Additives | Coapur™ 975 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It offers a unique pseudoplastic rheology profile, performing strongly at medium shear rates while contributing significantly at high ...展开 Coapur™ 975 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It offers a unique pseudoplastic rheology profile, performing strongly at medium shear rates while contributing significantly at high shear rates. 收起 | Request Sample |
| Coapur™ 980 W | Arkema Rheology & Specialty Additives | Coapur™ 980 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It offers a unique pseudoplastic rheology profile, performing strongly at medium shear rates while contributing significantly at high ...展开 Coapur™ 980 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It offers a unique pseudoplastic rheology profile, performing strongly at medium shear rates while contributing significantly at high shear rates. 收起 | Request Sample |
| Coapur™ XS 12 | Arkema Rheology & Specialty Additives | Coapur™ XS 12 is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyurethane thickener designed for water-based formulations. Coapur™ XS 12 can be used sole or in combination either with other polyurethane thickeners or with any type of rheo...展开 Coapur™ XS 12 is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyurethane thickener designed for water-based formulations. Coapur™ XS 12 can be used sole or in combination either with other polyurethane thickeners or with any type of rheology modifiers such as acrylic or cellulosic thickeners, acting at low shear rates. Coapur™ XS 12 is a pure associative thickener. 收起 | Request Sample |
| Coapur™ XS 22 | Arkema Rheology & Specialty Additives | Coapur™ XS 22 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It has been especially designed to offer a good reactivity with alkyd emulsion systems. | Request Sample |
| Coapur™ XS 71 | Arkema Rheology & Specialty Additives | Coapur™ XS 71 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It combines high in-can viscosity with excellent pigment compatibility with a unique pseudoplastic rheology profile. Its use limits vi...展开 Coapur™ XS 71 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It combines high in-can viscosity with excellent pigment compatibility with a unique pseudoplastic rheology profile. Its use limits viscosity drop after pigment paste addition, eliminates pigment flooding and floating during storage and enables to match excellent results based on rub-out test. 收起 | Request Sample |
| Coapur™ XS 83 | Arkema Rheology & Specialty Additives | Coapur™ XS 83 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides an exceptional pseudoplastic behaviour with very limited effect on high shear viscosities. It imparts very good sag resist...展开 Coapur™ XS 83 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides an exceptional pseudoplastic behaviour with very limited effect on high shear viscosities. It imparts very good sag resistance, sprayability and good compromise in terms of flow and leveling. 收起 | Request Sample |
| CRAYVALLAC® 60P | Arkema Rheology & Specialty Additives | CRAYVALLAC® 60P is a solid powder wax consisting of fine particles of oxidized polyethylene recommended to prevent irreversible hard settling. The fine nature of this dispersion means that CRAYVALLAC® 60P is easily incorporated and activated in coating sy...展开 CRAYVALLAC® 60P is a solid powder wax consisting of fine particles of oxidized polyethylene recommended to prevent irreversible hard settling. The fine nature of this dispersion means that CRAYVALLAC® 60P is easily incorporated and activated in coating systems. It is mainly used in industrial and maintenance coatings where its primary function is to provide pigment suspension without any increase in the apparent viscosity. CRAYVALLAC® 60P can generally be used in most solvent-based formulations. Typical applications are epoxy primers, vinyl primers, anti-fouling paints, road marking paints and chlorinated rubber coatings. 收起 | Request Sample |
| CRAYVALLAC® 60X | Arkema Rheology & Specialty Additives | CRAYVALLAC® 60X is a waxy solid paste consisting of very fine droplets of oxidized polyethylene dispersed in xylene. The fine nature of this dispersion means that CRAYVALLAC® 60X is easily incorporated and activated in coating systems. It is mainly used i...展开 CRAYVALLAC® 60X is a waxy solid paste consisting of very fine droplets of oxidized polyethylene dispersed in xylene. The fine nature of this dispersion means that CRAYVALLAC® 60X is easily incorporated and activated in coating systems. It is mainly used in industrial and maintenance coatings where its primary function is to provide pigment suspension without any increase in the apparent viscosity. 收起 | Request Sample |
| CRAYVALLAC® A-2201-M | Arkema Rheology & Specialty Additives | CRAYVALLAC® A-2201-M is a high performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-2201-M is suitable for use in a wide range of solvent based systems and applications. CRAYVALLAC® A-2201-M has be...展开 CRAYVALLAC® A-2201-M is a high performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-2201-M is suitable for use in a wide range of solvent based systems and applications. CRAYVALLAC® A-2201-M has been developed specifically to enhance substrate wetting and to improved leveling. As a result when compared with unadditivated coating, film effects such as craters, fisheyes, orange peel and pinholes are reduced and a superior overall appearance of the film is visible. CRAYVALLAC® A-2201-M can be used as well as an air release agent in solvent-based high solids systems applied by airless spray. 收起 | Request Sample |
| CRAYVALLAC® A-2678-M | Arkema Rheology & Specialty Additives | CRAYVALLAC® A-2678-M is a high performance acrylic dispersing and flow control agent for the control of coating surface properties. CRAYVALLAC® A-2678-M has been developed specifically to eliminate film surface defects that may occur during the film forma...展开 CRAYVALLAC® A-2678-M is a high performance acrylic dispersing and flow control agent for the control of coating surface properties. CRAYVALLAC® A-2678-M has been developed specifically to eliminate film surface defects that may occur during the film formation. The following benefits are to be gained by using CRAYVALLAC® A-2678-M in water based coatings: Enhanced substrate wetting and coating leveling, Reduced craters, fisheyes and pinhole. The results of these enhancements are smoother films with fewer imperfections and a superior overall appearance (measurable with glow and DOI) when compared with the unmodified coating. 收起 | Request Sample |
| CRAYVALLAC® A-620-A2 | Arkema Rheology & Specialty Additives | CRAYVALLAC® A-620-A2 is a high performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-620-A2 is suitable for use in a wide range of solvent based systems and applications.CRAYVALLAC® A-620-A2 has bee...展开 CRAYVALLAC® A-620-A2 is a high performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-620-A2 is suitable for use in a wide range of solvent based systems and applications.CRAYVALLAC® A-620-A2 has been developed specifically to enhance substrate wetting and to improved leveling. As a result when compared with unadditivated coating, film deffects such as craters, fisheyes, orange peel and pinholes are reduced and a superior overall appearance of the film is visible. 收起 | Request Sample |
| CRAYVALLAC® A-72-A2-60 | Arkema Rheology & Specialty Additives | CRAYVALLAC® A-72-A2-60 is a high-performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-72-A2-60 is suitable for use in a wide range of solvent-based systems and applications. CRAYVALLAC® A-72-A2-60 ...展开 CRAYVALLAC® A-72-A2-60 is a high-performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-72-A2-60 is suitable for use in a wide range of solvent-based systems and applications. CRAYVALLAC® A-72-A2-60 has been developed specifically to enhance substrate wetting and to improved leveling. As a result, when compared with unactivated coating, film defects such as craters, fisheyes, orange peel, and pinholes are reduced and a superior overall appearance of the film is visible with no degradation of the exterior durability. 收起 | Request Sample |
| CRAYVALLAC® ANTISETTLE CVP | Arkema Rheology & Specialty Additives | CRAYVALLAC® ANTISETTLE CVP is a 100 % active and bio-sourced castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® ANTISETTLE CVP is suited to coating systems based on aliphatic hydrocarbons. It shows excellent contro...展开 CRAYVALLAC® ANTISETTLE CVP is a 100 % active and bio-sourced castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® ANTISETTLE CVP is suited to coating systems based on aliphatic hydrocarbons. It shows excellent control of sedimentation combined with ease of application. In addition to coatings applications, CRAYVALLAC® ANTISETTLE CVP has also been used successfully in a multitude of other applications such as inks, adhesives, mastics, caulks, sealants, fillers, greases and lubricants. 收起 | Request Sample |
| CRAYVALLAC® D-801 | Arkema Rheology & Specialty Additives | CRAYVALLAC® D-801 is a high molecular weight wetting and dispersing agent for solvent-based coatings and pigment concentrates. CRAYVALLAC® D-801 is supplied as a solution of block copolymers with pigment anchorage groups. | Request Sample |
| CRAYVALLAC® EF 30P | Arkema Rheology & Specialty Additives | CRAYVALLAC® EF 30P is a low molecular weight styrene-maleic anhydride copolymer with an approximate 3:1 mole ratio. It is used as a matting agent in epoxy or epoxy/polyester powder coating formulations. Excellent results are obtained by combining CRAYVALL...展开 CRAYVALLAC® EF 30P is a low molecular weight styrene-maleic anhydride copolymer with an approximate 3:1 mole ratio. It is used as a matting agent in epoxy or epoxy/polyester powder coating formulations. Excellent results are obtained by combining CRAYVALLAC® EF 30P with REAFREE 6489-TS, Carboxylated Polyester resin. The very good colour stability of formulations containing CRAYVALLAC® EF 30P as matting additive, enables the production of low gloss white and pale colour paints. CRAYVALLAC® EF 30P has been developed specifically to provide matting effect in powder coatings. 收起 | Request Sample |
| CRAYVALLAC® EXTRA | Arkema Rheology & Specialty Additives | CRAYVALLAC® EXTRA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications with very high robustness. It is especially recommended in 2K epoxy primers for its high temperature tolerance.CRAYVALLA...展开 CRAYVALLAC® EXTRA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications with very high robustness. It is especially recommended in 2K epoxy primers for its high temperature tolerance.CRAYVALLAC® EXTRA overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body and that were maximized when activation was performed at high temperatures. 收起 | Request Sample |
| CRAYVALLAC® FLOW-100 | Arkema Rheology & Specialty Additives | CRAYVALLAC® FLOW-100 is a high performance acrylic flow and levelling agent for the control of coating surface properties. It enhances substrate wetting and improves flow and levelling properties. The following benefits are of interest for powder coatings...展开 CRAYVALLAC® FLOW-100 is a high performance acrylic flow and levelling agent for the control of coating surface properties. It enhances substrate wetting and improves flow and levelling properties. The following benefits are of interest for powder coatings and coatings in general e.g. solvent-based, high solids and solvent-free. 收起 | Request Sample |
| CRAYVALLAC® FLOW-200 | Arkema Rheology & Specialty Additives | CRAYVALLAC® Flow-200 is a high performance polyester based flow and levelling agent for the control of coating surface properties. CRAYVALLAC® Flow-200 has been developed specifically to eliminate film surface defects that may occur during the film format...展开 CRAYVALLAC® Flow-200 is a high performance polyester based flow and levelling agent for the control of coating surface properties. CRAYVALLAC® Flow-200 has been developed specifically to eliminate film surface defects that may occur during the film formation. 收起 | Request Sample |
| CRAYVALLAC® FLOW-400 | Arkema Rheology & Specialty Additives | CRAYVALLAC® Flow-400 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on Acrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® Flow-400 is...展开 CRAYVALLAC® Flow-400 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on Acrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® Flow-400 is also used as an adhesion promoter additive with excellent performance. CRAYVALLAC® Flow-400 is soluble in many solvents such as ketones, aromatics, mineral spirits, esters, glycol ethers and chlorinated hydrocarbons. CRAYVALLAC® Flow-400 is easily incorporated into formulations due to its wide compatibility and good solubility in most solvents. In Powder coatings, it is recommended to introduce the CRAYVALLAC® Flow-400 by hot blend or even dry blend. The method of incorporating CRAYVALLAC® Flow-400 into coating formulation does not affect the performance of the coating as long as it is uniformly dispersed in the system. This can be achieved by thoroughly mixing it with the other paint ingredients or by master batching the product in a base resin. 收起 | Request Sample |
| CRAYVALLAC® FLOW-450 | Arkema Rheology & Specialty Additives | CRAYVALLAC® FLOW-450 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on polyacrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® FLOW-45...展开 CRAYVALLAC® FLOW-450 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on polyacrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® FLOW-450 is also used as an adhesion promoter additive with excellent performance. CRAYVALLAC® FLOW-450 can furthermore successfully substitute classical defoamers within a formulation, demonstrating combined performance in terms of leveling and defoaming. CRAYVALLAC® FLOW-450 is easily incorporated into formulations due to its wide compatibility in most solvents. It is recommended to incorporate CRAYVALLAC® FLOW-450 in the mill-base in order to get maximum efficiency in terms of air release properties. 收起 | Request Sample |
| CRAYVALLAC® FLOW-465 | Arkema Rheology & Specialty Additives | CRAYVALLAC® FLOW-465 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on polyacrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® FLOW-46...展开 CRAYVALLAC® FLOW-465 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on polyacrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® FLOW-465 is easily incorporated into formulations due to its wide compatibility in most solvents. It is recommended to incorporate CRAYVALLAC® FLOW-465 in the mill-base in order to get maximum efficiency in terms of air release properties. 收起 | Request Sample |
| CRAYVALLAC® LA-150 | Arkema Rheology & Specialty Additives | CRAYVALLAC® LA-150 is a pourable liquid rheology modifier supplied in Dimethylsulfoxide (DMSO) for post addition to medium to high polarity solvent based coatings. It shows excellent control of sedimentation combined with ease of application. | Request Sample |
