| Amicure® CG-325G Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Amicure® CG-325G curing agent is a micronized grade of dicyandiamide containing 1.5% of an inert flow control additive to inhibit clumping and improve handling. It is designed for use as a latent curing agent for epoxy resins. | Request Sample |
| Amicure® DBU-E | Evonik Operations GmbH, BL Crosslinkers | Amicure® DBU-E is a high-purity, electronic grade of diazabicyclo-undecene. Highly efficient tertiary amine accelerator. Used in electrical encapsulation and transfer moulding powders. | Request Sample |
| Amicure® IC-221 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Amicure® IC-221 is an amine curing agent specifically designed for polyisocyanate resins. Preferred resins of choice are standard and low viscosity HDI trimer isocyanates for a range of industrial applications. Clear and pigmented topcoats and filled self...展开 Amicure® IC-221 is an amine curing agent specifically designed for polyisocyanate resins. Preferred resins of choice are standard and low viscosity HDI trimer isocyanates for a range of industrial applications. Clear and pigmented topcoats and filled self-leveling systems based on Amicure® IC-221 support high aesthetics, UV stability and rapid property development for fast return to service. Amicure® IC-221 curing agent is free of solvents, alkyl phenol derivatives and benzyl alcohol. 收起 | Request Sample |
| Amicure® IC-321 | Evonik Operations GmbH, BL Crosslinkers | Amicure® IC-321 is an curing agent specifically designed to cure under high humidity conditions with standard HDI Trimer isocyanate resins for a broad range of industrial flooring applications. Amicure® IC-321 curing agent for polyisocyanate resin is desi...展开 Amicure® IC-321 is an curing agent specifically designed to cure under high humidity conditions with standard HDI Trimer isocyanate resins for a broad range of industrial flooring applications. Amicure® IC-321 curing agent for polyisocyanate resin is designed to provide long working pot-life and high flexibility. In addition, clear and pigmented topcoats and filled self-leveling systems based on Amicure® IC-321 curing agent for polyisocyanate resin exhibit rapid property development and high aesthetics and are suitable for exterior application. 收起 | Request Sample |
| Amicure® IC166 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Amicure® IC166 is a polycarbamide curing agent for DTM C3 coatings. It is faster-curing compared to Amicure® IC133. This product is ideal for plural component spray systems. | Request Sample |
| Amicure® UR2T | Evonik Operations GmbH, BL Crosslinkers | Amicure® UR2T is a substitute for chlorophenyl ureas; co-curing accelerator for dicyandiamide-cured epoxy resins. Faster green strength adhesion build. Used in one-component paste and film adhesives, high-performance composites, and prepregs. | Request Sample |
| Amicure® UR7/10 | Evonik Operations GmbH, BL Crosslinkers | Amicure® UR7/10 cure accelerator, a finely ground version of Amicure UR accelerator; is a substituted urea-based accelerator (1 Phenyl 3,3 dimethyl urea) for dicyandiamidecured epoxy resins. It combines excellent latency at ambient temperature with rapid ...展开 Amicure® UR7/10 cure accelerator, a finely ground version of Amicure UR accelerator; is a substituted urea-based accelerator (1 Phenyl 3,3 dimethyl urea) for dicyandiamidecured epoxy resins. It combines excellent latency at ambient temperature with rapid cure in systems heated above its activation temperature. Amicure® UR7/10 is supplied as a micropulverized crystalline solid which is easily dispersed into liquid epoxy resin. Applications for this product include one-component paste and film adhesives, heat-cure composites, and prepreg composites. 收起 | Request Sample |
| Ancamide® 2050 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | 聚酰胺，具有高光泽、柔韧、坚硬和抗反冲击性能。无需诱导。适用于高固体份涂料和底漆、混凝土涂料、密封剂和腻子以及泳池漆 | Request Sample |
| Ancamide® 220 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 220 Curing Agent is one in a series of standard reactive polyamides for use in the curing of epoxy resins. It has been designed particularly for use in solvent-based surface coatings. | Request Sample |
| ANCAMIDE® 220-IPA-73 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-IPA-73 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers, and coatings for concrete. | Request Sample |
| ANCAMIDE® 220-X-70 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete. | Request Sample |
| ANCAMIDE 221® Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excelle...展开 ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. 收起 | Request Sample |
| ANCAMIDE 221-X70® Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xyle...展开 ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xylene. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. 收起 | Request Sample |
| Ancamide® 2353 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | 聚酰胺，可形成出色的高光泽涂膜，快干，无诱导时间。涂膜硬而且具有非常好的耐溶剂和耐腐蚀性能。具有聚酰胺最佳的耐化学品性能 | Request Sample |
| Ancamide® 2396 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | 改性酰胺胺，可在室温下与液体环氧树脂反应 | Request Sample |
| Ancamide® 2426 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | 不含增塑剂的酰胺胺，具有长开罐使用时间和出色的抗发白性能，出色的硬度形成和良好的耐水性试剂的能力。适用于高和100%固体份涂料和底漆 | Request Sample |
| Ancamide® 2445 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | 低粘度聚酰胺，可在低温下快速固化。低胺残留量。具有高光泽、出色的硬度和柔韧性 | Request Sample |
| Ancamide 2634™ Curing Agent | Evonik Operations GmbH, BL Crosslinkers | 改性聚酰胺，设计用于双组分溶剂型环氧涂料，其中高性能和低成本是主要要求 | Request Sample |
| Ancamide® 2652 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 2652 Curing Agent is a specialpolyamide adduct designed for use with liquid epoxy resins in two-part, ambient-cure coatings specifically developed to provide long overcoatability with epoxy and alternative resin technology. | Request Sample |
| Ancamide® 2769 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 2769 curing agent is an innovative technology designed for use with liquid epoxy resin. Showing polyamide like properties it is also 100% solids, contains no plasticizer and exhibits very low viscosity. This allows for formulation of solvent fre...展开 Ancamide® 2769 curing agent is an innovative technology designed for use with liquid epoxy resin. Showing polyamide like properties it is also 100% solids, contains no plasticizer and exhibits very low viscosity. This allows for formulation of solvent free or high solids coatings with ultra low volatile organic components. 收起 | Request Sample |
| Ancamide® 2832 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 2832 is a modified polyamide curing agent developed to provide rapid through cure and long overcoatability with epoxy resins. It can be used in refinish, non-automotive OEM and in wet-on-wet type applications in the protective coatings market fo...展开 Ancamide® 2832 is a modified polyamide curing agent developed to provide rapid through cure and long overcoatability with epoxy resins. It can be used in refinish, non-automotive OEM and in wet-on-wet type applications in the protective coatings market for fast return to service. 收起 | Request Sample |
| Ancamide® 2864 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 2864 is a next generation modified polyamide curing agent intended to be used in epoxy coatings for high-performance, corrosion resistant coatings. The curing agent exhibits low viscosity and fast through-cure with good blush resistance at both ...展开 Ancamide® 2864 is a next generation modified polyamide curing agent intended to be used in epoxy coatings for high-performance, corrosion resistant coatings. The curing agent exhibits low viscosity and fast through-cure with good blush resistance at both ambient and at low temperature conditions (5°C). 收起 | Request Sample |
| Ancamide® 2891 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 2891 curing agent is a modified Polyamide that enables excellent low temperature cure where high performance and cost effectiveness are key requirements. The curing agent is specifically designed for use in two component high solid or solvent b...展开 Ancamide® 2891 curing agent is a modified Polyamide that enables excellent low temperature cure where high performance and cost effectiveness are key requirements. The curing agent is specifically designed for use in two component high solid or solvent borne epoxy coatings, where high barrier properties and fast return to service are essential. Ancamide® 2891 Curing Agent is alkyl phenol and salicylic acid free while offering excellent Corrosion and Chemical Resistance along with good appearance. The product can be used over a broad temperature range and provides overnight cure at temperatures down to 5°C. 收起 | Request Sample |
| Ancamide® 350A Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 350A is a member of a series of reactive polyamides developed for use in the curing of epoxy resins. It has a high imidazoline content, longer pot-life and molecular weight, and lower viscosity than Ancamide® 220 or 260A and is used primarily, b...展开 Ancamide® 350A is a member of a series of reactive polyamides developed for use in the curing of epoxy resins. It has a high imidazoline content, longer pot-life and molecular weight, and lower viscosity than Ancamide® 220 or 260A and is used primarily, but not exclusively with liquid epoxy resin. Applications for Anacamide® 350A include adhesives, sealants, putties, flexible cable jointing and high solids coatings. 收起 | Request Sample |
| Ancamide® 351A Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 351A Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in coatings and adhesives applications. Special features include good color, color stability, excellent corrosion resistance and...展开 Ancamide® 351A Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in coatings and adhesives applications. Special features include good color, color stability, excellent corrosion resistance and superior adhesion properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. 收起 | Request Sample |
| Ancamide® 375A Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE™ 350A的更低粘度版本，是一种标准型高咪唑啉含量聚酰胺。适用于低VOC涂料、混凝土修补和薄泥浆以及胶粘剂 | Request Sample |
| ANCAMIDE® 400 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and p...展开 ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and putties, castings, laminates, and cable jointing compounds. 收起 | Request Sample |
| Ancamide® 512 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 512 Curing Agent is an aliphatic amidoamine curing agent designed for use with liquid epoxy resin at ambient or elevated temperatures. it can be used as the sole curing agent or in a mixture with other amine-based curing agents to adjust the cur...展开 Ancamide® 512 Curing Agent is an aliphatic amidoamine curing agent designed for use with liquid epoxy resin at ambient or elevated temperatures. it can be used as the sole curing agent or in a mixture with other amine-based curing agents to adjust the cure rate or other properties. 收起 | Request Sample |
| Ancamide® 910 | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 910 curing agent is a versatile, flexible hardener designed for use with liquid epoxy resin. Its engineered chemistry provides a unique combination of properties not found in other epoxy hardeners. It delivers outstanding flexibility/peel streng...展开 Ancamide® 910 curing agent is a versatile, flexible hardener designed for use with liquid epoxy resin. Its engineered chemistry provides a unique combination of properties not found in other epoxy hardeners. It delivers outstanding flexibility/peel strength, excellent thermal shock resistance, and good electrical properties. Additional features include lower viscosity than conventional polyamides and DOT non-corrosive status. Ancamide® 910 curing agent can be used either as a sole curing agent or as a modifier. 收起 | Request Sample |
| Ancamine® 1618 | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 1618 curing agent is a low-colour, low-viscosity, modified cycloaliphatic amine intended for ambient or low-temperature curing of liquid epoxy resins. It gives high-gloss films that are resistant to a variety of chemicals. These properties make ...展开 Ancamine® 1618 curing agent is a low-colour, low-viscosity, modified cycloaliphatic amine intended for ambient or low-temperature curing of liquid epoxy resins. It gives high-gloss films that are resistant to a variety of chemicals. These properties make it ideal for formulating floorings, maintenance coatings, tank linings, and secondary containment linings. Its very low colour and good colour stability make it appropriate for clear and pastel shade coatings. 收起 | Request Sample |
| Ancamine® 2014AS/FG | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2014AS/FG is a modified aliphatic polyamine adduct designed for use as a latent catalyst and curing agent for liquid epoxy resins. They can also be used as accelerators for dicyandiamide (DICY). This white micronised powder is applied in one-com...展开 Ancamine® 2014AS/FG is a modified aliphatic polyamine adduct designed for use as a latent catalyst and curing agent for liquid epoxy resins. They can also be used as accelerators for dicyandiamide (DICY). This white micronised powder is applied in one-component adhesives and solvent free laminating. 收起 | Request Sample |
| Ancamine™ 2264 | Evonik Operations GmbH, BL Crosslinkers | Ancamine™ 2264 curing agent is cycloaliphatic amine designed for use with liquid epoxy resins in the fabrication of industrial composites. It contains polycycloaliphatic polyamines (high functionality cycloaliphatic amines), which allows improved stiffnes...展开 Ancamine™ 2264 curing agent is cycloaliphatic amine designed for use with liquid epoxy resins in the fabrication of industrial composites. It contains polycycloaliphatic polyamines (high functionality cycloaliphatic amines), which allows improved stiffness and elevated temperature performance in cured systems, compared with cycloaliphatic diamine-cured systems. Applications for this product include filament winding, resin transfer molding, potting for tooling, electrical and general industrial applications. 收起 | Request Sample |
| Ancamine® 2334 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2334 Curing Agent is a modified cycloaliphatic amine curing agent designed for use with liquid epoxy resin at ambient temperature. The key benefits of formulations based on this product are excellent resistance to hot oleic acid, and good resist...展开 Ancamine® 2334 Curing Agent is a modified cycloaliphatic amine curing agent designed for use with liquid epoxy resin at ambient temperature. The key benefits of formulations based on this product are excellent resistance to hot oleic acid, and good resistance to dilute sulfuric acid and methanol. Appropriate applications include industrial flooring and chemically resistant coatings in food preparation areas. 收起 | Request Sample |
| Ancamine® 2337S | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component conduction or induction heat-cure adhesives, potting, coatings, and hot-melt prepreg...展开 Ancamine® 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component conduction or induction heat-cure adhesives, potting, coatings, and hot-melt prepregs. This product is a light yellow powder. 收起 | Request Sample |
| ANCAMINE® 2489 CURING AGENT | Evonik Operations GmbH, BL Crosslinkers | 改性脂环族胺，浅色、粘度低。允许更高的填料使用量或降低对稀释剂的需求量。可提供非常快速的固化和高光泽以及抗发白性能 | Request Sample |
| Ancamine® 2712 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2712 Curing Agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). This product is free of alkylsubstituted phenol and benzyl alcohol, faci...展开 Ancamine® 2712 Curing Agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). This product is free of alkylsubstituted phenol and benzyl alcohol, facilitating zero volatile organic component coating and flooring formulations. Also, Ancamine® 2712 curing agent allows the use in emission compliant coating and flooring systems. 收起 | Request Sample |
| Ancamine® 2712 M | Evonik Operations GmbH, BL Crosslinkers | Ancamine 2712M curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). Ancamine 2712M curing agent is free of alkylsubstituted phenol and benzy...展开 Ancamine 2712M curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). Ancamine 2712M curing agent is free of alkylsubstituted phenol and benzyl alcohol, facilitating zero volatile organic component coating and flooring formulations. Also, Ancamine 2712M curing agent allows the use in emission compliant coating and flooring systems. 收起 | Request Sample |
| Ancamine® 2726 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2726 is a modified cycloaliphatic amine that offers good color and color stability. It provides high-gloss, non-blushing films with good chemical resistance. This product is used in solvent-free and high-solids coatings, gel coats, and self-leve...展开 Ancamine® 2726 is a modified cycloaliphatic amine that offers good color and color stability. It provides high-gloss, non-blushing films with good chemical resistance. This product is used in solvent-free and high-solids coatings, gel coats, and self-leveling flooring. 收起 | Request Sample |
| Ancamine® 2735 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2735 is a modified cycloaliphatic polyamine. This low viscosity, low color curing agent is intended for ambient cure of liquid epoxy resin, but can cure resin systems down to 5 °C. Ancamine® 2735 advantages include, outstanding yellowing resist...展开 Ancamine® 2735 is a modified cycloaliphatic polyamine. This low viscosity, low color curing agent is intended for ambient cure of liquid epoxy resin, but can cure resin systems down to 5 °C. Ancamine® 2735 advantages include, outstanding yellowing resistance, low color, fast cure speed and hardness build at ambient and low temperature, low viscosity, very good chemical and mechanical resistance and good carbamation resistance Ancamine® 2735 applications may include industrial and decorative self leveling flooring, high solids and solvent free coatings. 收起 | Request Sample |
| Ancamine® 2739 | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2739 curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). This product is free of alkylsubstituted phenol, facilitating in low vol...展开 Ancamine® 2739 curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). This product is free of alkylsubstituted phenol, facilitating in low volatile organic component coating and flooring formulations and allows the use in emission compliant systems. Compared to Ancamine® 2712 curing agent, Ancamine® 2739 curing agent offers long pot-life whilst retaining cure speed and through cure and providing enhanced UV durability. 收起 | Request Sample |
| Ancamine® 2748 | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2748 curing agent is a modified cycloaliphatic amine designed for use with liquid epoxy resins in the formulation of two component epoxy coatings. This curative is intended for use in coatings that require resistance to acids, bases and solvents...展开 Ancamine® 2748 curing agent is a modified cycloaliphatic amine designed for use with liquid epoxy resins in the formulation of two component epoxy coatings. This curative is intended for use in coatings that require resistance to acids, bases and solvents in markets including waste water, secondary containment, flooring, tank coatings and other demanding applications. 收起 | Request Sample |
| Ancamine® 2749 | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2749 is a cycloaliphatic amine adduct curing agent designed for use with liquid epoxy resins. It is supplied as an amber liquid and has a viscosity of 275cPs at 25 °C. | Request Sample |
| Ancamine® 2759 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2759 Curing Agent is a modified cycloaliphatic polyamine intended for use as an ambient curing agent for liquid epoxy resin. Systems based on Ancamine® 2759 curing agent deliver fast cure speed and high resistance to carbamation and water spotti...展开 Ancamine® 2759 Curing Agent is a modified cycloaliphatic polyamine intended for use as an ambient curing agent for liquid epoxy resin. Systems based on Ancamine® 2759 curing agent deliver fast cure speed and high resistance to carbamation and water spotting. Ancamine® 2759 curing agent can be used to formulate solvent-free topcoats or self leveling and screed floorings where high chemical resistance is required. The product is free of nonyl phenol. 收起 | Request Sample |
| Ancamine® 2765 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2765 Curing Agent is an aliphatic amine adduct. When used with liquid epoxy resins in a coating formulation, it provides very good solvent and alcohol resistance. It also imparts good mechanical properties. Ancamine® 2765 is ideal for use in sol...展开 Ancamine® 2765 Curing Agent is an aliphatic amine adduct. When used with liquid epoxy resins in a coating formulation, it provides very good solvent and alcohol resistance. It also imparts good mechanical properties. Ancamine® 2765 is ideal for use in solvent-free coatings, laminates, adhesives, and as an accelerator for other curing agents. 收起 | Request Sample |
| Ancamine® 2800 | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2800 is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application. It is free of nonyl phenol, facilitating in low volatile organic component coating and flooring formulatio...展开 Ancamine® 2800 is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application. It is free of nonyl phenol, facilitating in low volatile organic component coating and flooring formulations. 收起 | Request Sample |
| Ancamine® 2802 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2802 curing agent is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient temperature application. Systems based on Ancamine® 2802 curing agent deliver excellent colour stability and high aesthetics w...展开 Ancamine® 2802 curing agent is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient temperature application. Systems based on Ancamine® 2802 curing agent deliver excellent colour stability and high aesthetics which makes the product ideal for low yellowing epoxy coating and flooring applications. In addition, Ancamine2802 curing agent was developed for use in emission compliant coatings and floorings. 收起 | Request Sample |
| Ancamine® 2908A Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2908A Curing Agent is a low viscosity liquid accelerator designed to cure liquid epoxy resins with various anhydride systems at elevated temperatures. The combination of its liquid form and its unique chemistry offers long working time and low v...展开 Ancamine® 2908A Curing Agent is a low viscosity liquid accelerator designed to cure liquid epoxy resins with various anhydride systems at elevated temperatures. The combination of its liquid form and its unique chemistry offers long working time and low viscosity. This can enhance fabricator processing with improved fiber wetting, minimised material waste and improved overall throughput. It is recommended for use in composites’ processing, industrial electrical, and electronics applications. 收起 | Request Sample |
| ANCAREZ® AR555 Waterborne Epoxy Resin | Evonik Operations GmbH, BL Crosslinkers | ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...展开 ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. 收起 | Request Sample |
| Anquamine® 100 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 100 is a waterborne curing agent equally suitable for standard liquid epoxy resin and solid epoxy resin dispersions. It combines in a unique way, fast drying with an extremely long pot life when used with liquid epoxy resin. Anquamine® 100 curi...展开 Anquamine® 100 is a waterborne curing agent equally suitable for standard liquid epoxy resin and solid epoxy resin dispersions. It combines in a unique way, fast drying with an extremely long pot life when used with liquid epoxy resin. Anquamine® 100 curing agent provides 6-8 hours pot life with liquid epoxy resins and addresses the typically short pot life of 1-2 hours from current two component, water-based systems. 收起 | Request Sample |
| Anquamine® 287 Curing Agent - Fast One-Day Flooring System on to Concrete | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 287 curing agent is a water-based epoxy curing agent based on a Mannich base adduct specifically developed for concrete primer applications including green concrete. It is designed for use with standard and modified liquid epoxy resins without ...展开 Anquamine® 287 curing agent is a water-based epoxy curing agent based on a Mannich base adduct specifically developed for concrete primer applications including green concrete. It is designed for use with standard and modified liquid epoxy resins without the addition of emulsifiers. Anquamine® 287 curing agent based primers exhibit excellent adhesion to concrete and penetration properties that out perform other conventional curing agent technology. The product is VOC free and supports low emission applications. 收起 | Request Sample |
| Anquamine® 287 Waterborne Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 287 a novel water-based epoxy curing agent designed for use in two part epoxy systems with standard liquid and modified liquid epoxy resins without the addition of emulsifiers. Its appearance is amber to greenish liquid. Anquamine® 287 based pr...展开 Anquamine® 287 a novel water-based epoxy curing agent designed for use in two part epoxy systems with standard liquid and modified liquid epoxy resins without the addition of emulsifiers. Its appearance is amber to greenish liquid. Anquamine® 287 based primers exhibit excellent adhesion to green concrete and penetration properties that outperform other water-based curing agent technology. It also can be formulated into a cementitious epoxy floor with excellent moisture permeability and thermal shock resistance. Applications can include, cementitious epoxy flooring, primer/sealer for green concrete, concrete curing compound and primer for old and new concrete. 收起 | Request Sample |
| Anquamine® 401 | Evonik Operations GmbH, BL Crosslinkers | 水性固化剂，具有快速干燥时间，以及出色的硬度和良好的防腐蚀性能。可为高光泽涂膜提供出色的保光性 | Request Sample |
| Anquamine® 419 | Evonik Operations GmbH, BL Crosslinkers | 水性固化剂，具有快干时间和出色的耐腐蚀和耐湿性，良好的光泽和保光性，以及对钢基材出色的附着力 | Request Sample |
| Anquamine® 721 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 721 waterborne curing agent is a modified amine curing agent designed for use in waterborne epoxy coatings where cost effectiveness and high performance are key requirements. Anquamine® 721 curing agent can be formulated to low or zero VOC....展开 Anquamine® 721 waterborne curing agent is a modified amine curing agent designed for use in waterborne epoxy coatings where cost effectiveness and high performance are key requirements. Anquamine® 721 curing agent can be formulated to low or zero VOC. It offers good pot life, good dry speed, and good emulsion stability even at low solids. Cured coatings exhibit high gloss, a balance of hardness and flexibility, and very good adhesion to concrete. 收起 | Request Sample |
| Anquamine® 728 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 728 waterborne curing agent is a multi-purpose curing agent for use in concrete primers and topcoats, and delivers fast cure speed at low temperature (10˚C) and high humidity (up to 85% RH). It can be used with solid epoxy resin dispersion, Anc...展开 Anquamine® 728 waterborne curing agent is a multi-purpose curing agent for use in concrete primers and topcoats, and delivers fast cure speed at low temperature (10˚C) and high humidity (up to 85% RH). It can be used with solid epoxy resin dispersion, Ancarez® AR 555, and standard liquid epoxy resin. 收起 | Request Sample |
| Anquamine® 731 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 731 is a water-based curing agent is specifically designed for a standard liquid epoxy resin. It is specifically designed for costeffective high-film build concrete coatings. It is particularly suitable for water-based self-leveling systems. ...展开 Anquamine® 731 is a water-based curing agent is specifically designed for a standard liquid epoxy resin. It is specifically designed for costeffective high-film build concrete coatings. It is particularly suitable for water-based self-leveling systems. Anquamine® 731 curing agent easily emulsifies standard liquid epoxy resins without the need for emulsifiable or pre-emulsified epoxy resins. 收起 | Request Sample |
| Anquamine® 735 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 735 is a waterborne curing agent for standard liquid epoxy resin. It is specifically designed for cost effective high film build concrete coatings. It is particularly suitable for water-based self levelling systems of 1-3 mm film thickness. Fo...展开 Anquamine® 735 is a waterborne curing agent for standard liquid epoxy resin. It is specifically designed for cost effective high film build concrete coatings. It is particularly suitable for water-based self levelling systems of 1-3 mm film thickness. Formulations based on Anquamine® 735 curing agent provide highly decorative functional floors without the requirement for plasticisers or solvents. 收起 | Request Sample |
| BM52 | Pioneer Chemicals Co., Ltd. | BM52, in the form of a powder, is a copolymer of methacrylates that is a kind of alcohol solubility resin and can be dissolved by ethanol and other weak solvents. It has low odor, high purity, and offers better hardness and pigment dispersion, and holds ...展开 BM52, in the form of a powder, is a copolymer of methacrylates that is a kind of alcohol solubility resin and can be dissolved by ethanol and other weak solvents. It has low odor, high purity, and offers better hardness and pigment dispersion, and holds admirable adhesion on almost all nylons (PA) and metals. BM52 is widely used in coatings on special substrates, alcohol soluble inks, and eco-friendly coatings with a molecular weight of 70,000 g/mol, moisture content of equal to or less than 1.0%, and an inherent viscosity of 0.51 to 55. 收起 | |
| BM61 | Pioneer Chemicals Co., Ltd. | BM61, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic...展开 BM61, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic hydrocarbons, ketones, esters. It has good compatibility with cellulose acetate, NC, vinyl resin, and it is commonly used in UV ink formulation (OPP/BOPP film) as inert resin to reduce shrinkage and to enhance adhesion. BM61 is also broadly used in eco-friendly correction fluid, aluminum heat sealing lacquer, cardboard ink, and more. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 6.5 mgKOH/g, and an inherent viscosity of 0.20 to 0.26. 收起 | |
| BM61A | Pioneer Chemicals Co., Ltd. | BM61A, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromati...展开 BM61A, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic hydrocarbons, ketones, esters. It has good compatibility with cellulose acetate, NC, vinyl resin, plasticizer, and it is commonly used in UV ink formulation (OPP/BOPP film) as inert resin to reduce shrinkage and to enhance adhesion. BM61A is also broadly used in gravure inks, aluminum heat sealing lacquer, cardboard ink, and more. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 0.5%, and an inherent viscosity of 0.20 to 0.26. 收起 | |
| BM70 | Pioneer Chemicals Co., Ltd. | BM70, in the form of a pellet, is a copolymer of methyl methacrylate and methacrylic acid that is soluble in polar organic solvents such as ketones and esters and can be dissolved in esters (or ketones) for alcohol soluble inks and mixed solvent like abso...展开 BM70, in the form of a pellet, is a copolymer of methyl methacrylate and methacrylic acid that is soluble in polar organic solvents such as ketones and esters and can be dissolved in esters (or ketones) for alcohol soluble inks and mixed solvent like absolute ethyl alcohol. It offers good adhesion on glass, metal, plastic, and is broadly used in glass inks, metal coatings, and more. BM70 has a molecular weight of 40,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 70 mgKOH/g, and an inherent viscosity of 65.0 to 70.0. 收起 | |
| BM820 | Pioneer Chemicals Co., Ltd. | BM820, in the form of a powder, is a thermoplastic solid acrylic resin with good gloss, weather-ability, and unique hardness. It is easily soluble in numerous organic solvents such as esters, ketones, white spirit, long-chain fatty alcohol such as aromati...展开 BM820, in the form of a powder, is a thermoplastic solid acrylic resin with good gloss, weather-ability, and unique hardness. It is easily soluble in numerous organic solvents such as esters, ketones, white spirit, long-chain fatty alcohol such as aromatic hydrocarbons and isopropanol. It also has good compatibility with other film forming resins such as other acrylic resins, vinyl resins, some alkyds, and is good for applications in plastic coating and aerosol spray. BM820 has a molecular weight of 250,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.61 to 0.63. 收起 | |
| BM9A | Pioneer Chemicals Co., Ltd. | BM9A, in the form of a powder, is a polymer of iso-butyl methacrylate that offers good durability, gloss, heat resistance, pigment wettability, and high flexibility. It is easily soluble in numerous organic solvents such as high alcohol, ketones, chlorina...展开 BM9A, in the form of a powder, is a polymer of iso-butyl methacrylate that offers good durability, gloss, heat resistance, pigment wettability, and high flexibility. It is easily soluble in numerous organic solvents such as high alcohol, ketones, chlorinated solvent, esters, aromatic hydrocarbons, and white gasoline. BM9A can be used as its modifying agent, based on its good compatibility with middle/long oil alkyd resin. It is compatible with chlorinated paraffin, PVC resin, and it is applied to alkyd modified coatings, gilding material coatings (adhesive layer), metal coatings, and more. BM9A has a molecular weight of 130,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.49 to 0.52. 收起 | |
| Epilink™ 360 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Epilink™ 360 Curing Agent is a modified polyamide curing agent designed for use with liquid epoxy resins in two-component, ambient-cure, waterborne epoxy coatings. It is supplied at 50% solids in water, allowing for the formulation of very low or zero-VOC...展开 Epilink™ 360 Curing Agent is a modified polyamide curing agent designed for use with liquid epoxy resins in two-component, ambient-cure, waterborne epoxy coatings. It is supplied at 50% solids in water, allowing for the formulation of very low or zero-VOC epoxy coatings with handling and performance properties typical of solventborne formulations. 收起 | Request Sample |
| EPODIL® 742 | Evonik Operations GmbH, BL Crosslinkers | An epoxy resin system modifier. | Request Sample |
| EPODIL® 747 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 747 Reactive Diluent is an aliphatic glycidyl ether comparable to Epoxide 7.1 It is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain term...展开 EPODIL® 747 Reactive Diluent is an aliphatic glycidyl ether comparable to Epoxide 7.1 It is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. It is ideal for use in flooring, mortars, and grouts, high and 100%-solids coatings, laminates, and potting compounds. 收起 | Request Sample |
| Epodil® 748 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | Epodil® 748 Reactive Diluent is the glycidyl ether of a mixture of C12-C14 aliphatic alcohols used to reduce the viscosity of epoxy resin systems. It is a monofunctional reactive diluent, which provides excellent viscosity reduction. In addition the low l...展开 Epodil® 748 Reactive Diluent is the glycidyl ether of a mixture of C12-C14 aliphatic alcohols used to reduce the viscosity of epoxy resin systems. It is a monofunctional reactive diluent, which provides excellent viscosity reduction. In addition the low level of volatility and ability to reduce the surface tension of epoxy resins make this product a general purpose diluent. 收起 | Request Sample |
| Epodil® 749 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | Epodill® 749 Reactive Diluent is neopentyl glycol diglycidyl ether used to reduce the viscosity of epoxy resin systems. It is a difunctional reactive diluent, which provides good viscosity reduction with minimal reduction in physical properties. This prod...展开 Epodill® 749 Reactive Diluent is neopentyl glycol diglycidyl ether used to reduce the viscosity of epoxy resin systems. It is a difunctional reactive diluent, which provides good viscosity reduction with minimal reduction in physical properties. This product is applied in laminates, flooring and motars, and potting and encapsulation. 收起 | Request Sample |
| EPODIL® 757 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 757 Reactive Diluent is a technical grade of the glycidyl ether of cyclohexane dimethanol. The product is a cycloaliphatic difunctional reactive diluent used to reduce the viscosity of epoxy resin systems. It is ideal for use in laminates, potting...展开 EPODIL® 757 Reactive Diluent is a technical grade of the glycidyl ether of cyclohexane dimethanol. The product is a cycloaliphatic difunctional reactive diluent used to reduce the viscosity of epoxy resin systems. It is ideal for use in laminates, potting compounds, mortars, grouts and flooring. 收起 | Request Sample |
| EPODIL® 759 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...展开 EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. 收起 | Request Sample |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| HYBRIDUR® 580 Polymer Dispersion | Evonik Operations GmbH, BL Crosslinkers | HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...展开 HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. 收起 | Request Sample |
| Hybridur® 870 Polymer Dispersion | Evonik Operations GmbH, BL Crosslinkers | 不含NMP，阴离子稳定的丙烯酸-氨基甲酸酯混合聚合物乳液。它应用于自干、烤漆或交联高性能涂料中具有出色的润湿性、附着力、阻隔性和涂膜性能 | Request Sample |
| IMICURE® AMI-1 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal f...展开 IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal for use in adhesives, pre-preg composites, and encapsulation. 收起 | Request Sample |
| Imicure® EMI-24 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Imicure® EMI-24 Curing Agent is 2-ethyl-4-methyl Imidazole, a high-reactivity, medium-viscosity liquid imidazole designed for use as a latent curing agent/curing accelerator for epoxy resins. It is used alone or to accelerate dicyandiamide or anhydride cu...展开 Imicure® EMI-24 Curing Agent is 2-ethyl-4-methyl Imidazole, a high-reactivity, medium-viscosity liquid imidazole designed for use as a latent curing agent/curing accelerator for epoxy resins. It is used alone or to accelerate dicyandiamide or anhydride cures. This product is applied in filament winding, electrical laminates, moulding powders, one-component adhesives, and structural adhesives. 收起 | Request Sample |
| IMICURE® Imidazole Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good acc...展开 IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good accelerator for dicyandiamide, anhydride and phenolic curing agents. 收起 | Request Sample |
| Lonwa 5022WR | Shantou Longhua Pearl Lustre Pigments Co.,Ltd. 汕头市龙华珠光颜料有限公司 | Lonwa 5022WR is a bronze powder with a Color Index Number of (Mica):C.I.No.77019/(Fe2O3):C.I.No.77491. | |
| Lonwa Pearls 1002 Sliver White | Shantou Longhua Pearl Lustre Pigments Co.,Ltd. 汕头市龙华珠光颜料有限公司 | Lonwa Pearls 1002 Sliver White is a silver white powder with a Color Index Number of (TiO2):C.I.No.77891/(Mica):C.I.No.77019. | |
| Lonwa Pearls 1032WR Silverwhite | Shantou Longhua Pearl Lustre Pigments Co.,Ltd. 汕头市龙华珠光颜料有限公司 | Lonwa Pearls 1032WR Silverwhite is a silver white powder with a Color Index Number of (TiO2):C.I.No.77891/(Mica):C.I.No.77019/(SnO2):C.I.No.77861. | |
| Lonwa Pearls 2052 Interference Golden | Shantou Longhua Pearl Lustre Pigments Co.,Ltd. 汕头市龙华珠光颜料有限公司 | Lonwa Pearls 2052 Interference Golden is an interference color powder with a Color Index Number of (TiO2):C.I.No.77891/(Mica):C.I.No.77019/(SnO2):C.I.No.77861. | |
| Lonwa Pearls 3002 Golden Pearl | Shantou Longhua Pearl Lustre Pigments Co.,Ltd. 汕头市龙华珠光颜料有限公司 | Lonwa Pearls 3002 Golden Pearl is a golden powder with a Color Index Number of (TiO2):C.I.No.77891/(Mica):C.I.No.77019/(Fe2O3):C.I.No.77491. | |
| MB-10 | Pioneer Chemicals Co., Ltd. | MB-10, in the form of a bead, is the homopolymer of BMA that offers good adhesion and flexibility and is easily soluble in various organic solvents such as aromatic hydrocarbons, esters, ketones, and long-chain fatty alcohol. It has good compatibility wit...展开 MB-10, in the form of a bead, is the homopolymer of BMA that offers good adhesion and flexibility and is easily soluble in various organic solvents such as aromatic hydrocarbons, esters, ketones, and long-chain fatty alcohol. It has good compatibility with other film forming resins such as vinyl resin, NC, and chlorinated rubber. MB-10 is mainly used in containers and packaging, functional coatings and inks, inks for PET coated films and papers, especially suitable for aluminum substrate coatings and inks for lithographic heat transfers. It has a molecular weight of 180,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 9.0 mgKOH/g, and an inherent viscosity of 0.47 to 0.56. 收起 | |
| MB-18-A | Pioneer Chemicals Co., Ltd. | MB-18-A, in the form of a bead, is a copolymer of methacrylates that offers admirable performance on plasticizer migration resistance, weather-ability, alcohol resistance, durability. It is easily soluble in numerous organic solvents such as aromatic hydr...展开 MB-18-A, in the form of a bead, is a copolymer of methacrylates that offers admirable performance on plasticizer migration resistance, weather-ability, alcohol resistance, durability. It is easily soluble in numerous organic solvents such as aromatic hydrocarbons, ketones, esters, and it has admirable compatibility and good solvent release ability with other film forming resins, such as plasticizer, NC, and CAB. MB-18-A is commonly used in PVC inks, toy coatings, and plastic coatings where alcohol resistance is strictly required. It has a molecular weight of 120,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.46 to 0.53. 收起 | |
| MB-2 | Pioneer Chemicals Co., Ltd. | MB-2, in the form of a bead, is a copolymer of Methacrylates and Styrene with enough hardness, offers high gloss, good gasoline resistance, abrasion resistance, humidity and heat resistance, and good solvent release ability. It is easily soluble in sever...展开 MB-2, in the form of a bead, is a copolymer of Methacrylates and Styrene with enough hardness, offers high gloss, good gasoline resistance, abrasion resistance, humidity and heat resistance, and good solvent release ability. It is easily soluble in several organic solvents including esters, chlorinated solvents ketones, aromatic hydrocarbons, and it has good compatibility with other film forming resins such as plasticizers, vinyl resin and NC. MB-2 is broadly used in PVC printing inks, masonry coatings, PVC processing, upholstery, floor coatings, gravure inks, PVC top coatings, and road marking. It has a molecular weight of 140,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.62 to 0.68. 收起 | |
| MB-311 | Pioneer Chemicals Co., Ltd. | MB-311, in the form of a bead, is a copolymer of butyl methacrylate that offers good durability and weather-ability, and it also offers good flexibility, pigment dispersion, better flow-ability, and high gloss due to its low molecular weight of 30,000 g/m...展开 MB-311, in the form of a bead, is a copolymer of butyl methacrylate that offers good durability and weather-ability, and it also offers good flexibility, pigment dispersion, better flow-ability, and high gloss due to its low molecular weight of 30,000 g/mol. It is easily soluble in long-chain alcohol, esters, ketones, aromatic hydrocarbons, and chlorinated solvent. MB-311 is normally used in varnish coatings, ceramic inks, and top coatings. It has a moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.13 to 0.17. 收起 |
