| Hailerui Cadmium Red P2018 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Red P2018 is an inorganic pigment that appears as a red powder. This product has an oil absorption of 16-23 and a moisture content of <0.5%. It can be used in paints, coatings, and art gravure painting inks. | |
| Hailerui Cadmium Yellow P2037-1 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Yellow P2037-1 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks. | |
| Hailerui Cadmium Yellow P2037-4 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Yellow P2037-4 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks. | |
| Hailerui Cadmium Yellow P2037-5 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Yellow P2037-5 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks. | |
| Hailerui Cobalt Blue P2008 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cobalt Blue P2008 is an inorganic pigment that appears as a bright blue powder. This product has an oil absorption of 18-25 g/100g and a pH value of 7.5. It can be used in paints and industrial coatings. | |
| Hailerui Permanent Violet P.V.23BL | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Permanent Violet P.V.23BL is a high performance organic pigment that appears as a violet powder. This product has an oil absorption of 38-53 g/100g and a pH value of 6.2. It can be used in paints, printing inks, and textiles. | |
| Hailerui Permanent Violet P.V.23RL | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Permanent Violet P.V.23RL is a high performance organic pigment that appears as a violet powder. This product has an oil absorption of 38-53 g/100g and a pH value of 6.2. It can be used in paints, printing inks, and textiles. | |
| Hailerui Phthalocyanine Blue P.B.15:0 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:0 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Blue P.B.15:1 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:1 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Blue P.B.15:2 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:2 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Blue P.B.15:3 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:3 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Blue P.B.15:4 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:4 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Green PG7 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Green PG7 is an organic copper pigment that appears as a dark green powder. This product has an oil absorption of 30-45 g/100g and a pH value of 6.5-8. It can be used in coatings, paints, inks, and printing paste. | |
| Hailerui Titanium Yellow 42-118A | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Titanium Yellow 42-118A is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks. | |
| Hailerui Titanium Yellow K2001 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Titanium Yellow K2001 is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks. | |
| Hailerui Titanium Yellow K2001FG | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Titanium Yellow K2001FG is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks. | |
| Hailerui Titanium Yellow TY-300 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Titanium Yellow TY-300 is an inorganic pigment that appears as a dark yellow powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks. | |
| Hailerui Ultramarine Blue 5008 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue 5008 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue EP-19 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue EP-19 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue EP-25 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue EP-25 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue EP-37 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue EP-37 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue GP-58 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue GP-58 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue RS-05 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue RS-05 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue RS-06 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue RS-06 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| HARDLEN 13LP | DKSH | HARDLEN 13LP is a resin grafted with Chlorine (CPO), which has good adhesion power to Polyolefins without any surface treatment. HARDLEN 13LP main characteristics are: excellent Adhesion Promoter to plastics without any surface treatment such as corona or...展开 HARDLEN 13LP is a resin grafted with Chlorine (CPO), which has good adhesion power to Polyolefins without any surface treatment. HARDLEN 13LP main characteristics are: excellent Adhesion Promoter to plastics without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN 13LP main applications is adhesive for Polyolefins, Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN 15LP | DKSH | HARDLEN 15LP is a resin grafted with Chlorine (CPO) which has good adhesion power to Polyolefins without any surfase treatment. HARDLEN 15LP main characteristics are: ecellent Adhesion Promoter without any surface treatment such as corona or flame. Availa...展开 HARDLEN 15LP is a resin grafted with Chlorine (CPO) which has good adhesion power to Polyolefins without any surfase treatment. HARDLEN 15LP main characteristics are: ecellent Adhesion Promoter without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN 15LP main applications are: gravure and printing ink, hot-stamping ink Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN CY1321P | DKSH | HARDLEN CY1321P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY1321P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolef...展开 HARDLEN CY1321P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY1321P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any C14surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN CY1321P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN CY2321P | DKSH | HARDLEN CY2321P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY2321P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolef...展开 HARDLEN CY2321P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY2321P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN CY2321P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN CY2329 | DKSH | HARDLEN CY2329 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY2329 main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefin...展开 HARDLEN CY2329 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY2329 main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. HARDLEN CY2329 main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN CY9122P | DKSH | HARDLEN CY9122P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY9122P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolef...展开 HARDLEN CY9122P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY9122P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN CY9122P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN CY9124P | DKSH | HARDLEN CY9124P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY9124P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolef...展开 HARDLEN CY9124P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY9124P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN CY9124P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN DX523P | DKSH | HARDLEN DX523P is a resin grafted with Chlorine which has good adhesion power to Polyolefins without any surfase treatment. HARDLEN DX523P main characteristics are: ecellent Adhesion Promoter to plastics without any surface treatment such as corona or fla...展开 HARDLEN DX523P is a resin grafted with Chlorine which has good adhesion power to Polyolefins without any surfase treatment. HARDLEN DX523P main characteristics are: ecellent Adhesion Promoter to plastics without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN DX523P main applications are: gravure printing ink, hot-stamping ink and UV ink to Polyolefins. Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN DX526P | DKSH | HARDLEN DX526P is a resin grafted with Chlorinewhich has good adhesion power to Polyolefins without any surfase treatment. HARDLEN DX526P main characteristics are: ecellent Adhesion Promoter to plastics without any surface treatment such as corona or flam...展开 HARDLEN DX526P is a resin grafted with Chlorinewhich has good adhesion power to Polyolefins without any surfase treatment. HARDLEN DX526P main characteristics are: ecellent Adhesion Promoter to plastics without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN DX526P main applications are: gravure printing ink, hot-stamping ink and UV ink to Polyolefins. Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN DX530P | DKSH | HARDLEN DX530P is a resin grafted with Chlorinewhich has good adhesion power to Polyolefins without any surfase treatment. HARDLEN DX530P main characteristics are: ecellent Adhesion Promoter to plastics without any surface treatment such as corona or flam...展开 HARDLEN DX530P is a resin grafted with Chlorinewhich has good adhesion power to Polyolefins without any surfase treatment. HARDLEN DX530P main characteristics are: ecellent Adhesion Promoter to plastics without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN DX530P main applications are: gravure printing ink, hot-stamping ink and UV ink to Polyolefins. Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN EH801J | DKSH | HARDLEN EH801J is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EH801J main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins...展开 HARDLEN EH801J is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EH801J main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins without any surface treatment such as corona or flame. HARDLEN EH801J main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN EW5250 | DKSH | HARDLEN EW5250 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EW5250 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins...展开 HARDLEN EW5250 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EW5250 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins without any surface treatment such as corona or flame. HARDLEN EW5250 main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN EW5515 | DKSH | HARDLEN EW5515 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EW5515 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins...展开 HARDLEN EW5515 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EW5515 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins without any surface treatment such as corona or flame. HARDLEN EW5515 main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN EZ2250 | DKSH | HARDLEN EZ2250 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EZ2250 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins...展开 HARDLEN EZ2250 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EZ2250 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins without any surface treatment such as corona or flame. HARDLEN EZ2250 main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN F-225P | DKSH | HARDLEN F-225P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN F-225P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefin...展开 HARDLEN F-225P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN F-225P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN F225P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN F2P | DKSH | HARDLEN F2P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN F2P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins with...展开 HARDLEN F2P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN F2P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN F2P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN F6P | DKSH | HARDLEN F6P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN F6P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins with...展开 HARDLEN F6P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN F6P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN F6P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN NZ1004 | DKSH | HARDLEN NZ1004 is a chlorine free resin grafted with C Maleic anhydride, which has good adhesion power to Polyolefins or plastics without any surfase treatment. HARDLEN NZ1004 main characteristics are: ecellent Adhesion Promoter to Clorinated Polyolefins ...展开 HARDLEN NZ1004 is a chlorine free resin grafted with C Maleic anhydride, which has good adhesion power to Polyolefins or plastics without any surfase treatment. HARDLEN NZ1004 main characteristics are: ecellent Adhesion Promoter to Clorinated Polyolefins without any surface treatment such as corona or flame. HARDLEN NZ1004 main applications are: Vehicles for gravure printing ink, hot-stamping ink and UV ink to Polyolefins. Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| HARDLEN NZ1015 | DKSH | HARDLEN NZ1015 is a chlorine free resin grafted with C Maleic anhydride, which has good adhesion power to Polyolefins or plastics without any surfase treatment. HARDLEN NZ1015 main characteristics are: ecellent Adhesion Promoter to Clorinated Polyolefins ...展开 HARDLEN NZ1015 is a chlorine free resin grafted with C Maleic anhydride, which has good adhesion power to Polyolefins or plastics without any surfase treatment. HARDLEN NZ1015 main characteristics are: ecellent Adhesion Promoter to Clorinated Polyolefins without any surface treatment such as corona or flame. HARDLEN NZ1015 main applications are: Vehicles for gravure printing ink, hot-stamping ink and UV ink to Polyolefins. Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. 收起 | Request Sample |
| IAAC | DKSH | IAAC is used in solvent-based formulas of automotive, industrial and wood paints and thinner formulations. In paint formulas, IAAC is an excellent active solvent, of medium evaporation rate in most acrylic, cellulose (nitro, CAB), epoxy, polyester, polyur...展开 IAAC is used in solvent-based formulas of automotive, industrial and wood paints and thinner formulations. In paint formulas, IAAC is an excellent active solvent, of medium evaporation rate in most acrylic, cellulose (nitro, CAB), epoxy, polyester, polyurethane resins and hybrid systems. It reduces the evaporation rates of the systems, which allows a suitable balance of solvency and guarantees the presence of the active solvent during drying. It also acts as an aid in the elimination of blush, preventing the bleaching of paints after application in very wet environments. It finds use in original automotive, refinishing paints, lacquers and thinners, in combination with slower evaporation solvents, like butyl glycol acetate, ethyl glycol acetate and butyl glycol. IAAC has high electrical resistivity, acting as a conductivity regulator, which contributes toward improving the performance and deposition characteristics of solvent-based paints applied electrostatically. In formulas of paints for wood, IAAC provides a film with excellent leveling and sheen characteristics. Chemical name: Isopentyl Acetate, Acetic Amyl Ester. Molecular formula: CH3COO (CH2)2CH (CH3)2. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| IONPURE | DKSH | IONPURE is a soluble glass containing anti-microbial metal ions. It maintains the transparency when added to PP, PVC, PC, ABS, PC. It exhibits a high heat resistance and high performance at low concentration. IONPURE is not discolored by compounding and w...展开 IONPURE is a soluble glass containing anti-microbial metal ions. It maintains the transparency when added to PP, PVC, PC, ABS, PC. It exhibits a high heat resistance and high performance at low concentration. IONPURE is not discolored by compounding and with age, as it can control the speed of releasing metal ions. It is suitable for use in flooring materials and wallpapers. 收起 | Request Sample |
| IPDA | DKSH | IPDA is a colorless or pale yellow transparent liquid with an amine-like odor at room temperature. It is a mixture of two stero-isomers of 3-aminomethyl-3,5,5-trimethylcyclohe-xylamine. IPDA is a cycloalifatic diamine with special structure and is used in...展开 IPDA is a colorless or pale yellow transparent liquid with an amine-like odor at room temperature. It is a mixture of two stero-isomers of 3-aminomethyl-3,5,5-trimethylcyclohe-xylamine. IPDA is a cycloalifatic diamine with special structure and is used in all typical reactions of this kind of amine functional chemicals. It is widely miscible with a full range of alifatic, aromatic and halogenated solvents of different polarity. Chemical description: 3-aminomethyl-3,5,5-trimethylcyclohexylamine. This product is available in Europe and Korea. 收起 | Request Sample |
| ITAMID B | DKSH | ITAMID B is a polyaminoamide resin of high viscosity at room temperature and which is used combined with liquid or solid epoxy resins to obtain products hardening even at room temperature and which is used in the anticorrosion paints, protective coatings ...展开 ITAMID B is a polyaminoamide resin of high viscosity at room temperature and which is used combined with liquid or solid epoxy resins to obtain products hardening even at room temperature and which is used in the anticorrosion paints, protective coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces. ITAMID B, which can also be used neat, is usually used in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. In solvent free systems ITAMID B is usually used in combination with liquid epoxy resins giving high adhesion properties. With an epoxy resin of an epoxy weight equivalent of about 190g/eq, ITAMID B is normally used in equal parts. This ratio can be varied, even widely, whilst bearing in mind that a greater percentage of polyamide resin increases flexibility but reduces resistance to chemicals. More frequently ITAMID B is combined with a solid epoxy resin in solvent systems whose pot-life changes with the percentage of solvent and temperature in addition to the type of epoxy resin used. For example, a formulation with 40% of solvents with an epoxy resin of epoxy equivalent weight 475 and a ratio of 65/35 epoxy to polyamide will exhibit a pot-life at room temperature of about two days. 收起 | Request Sample |
| ITAMID C | DKSH | ITAMID C is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C is used above all in the field of anticorrosion paints, protective coatings with high resi...展开 ITAMID C is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C is used above all in the field of anticorrosion paints, protective coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces. ITAMID C, can be dissolved readily in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. In solvent free systems, ITAMID C when used combined with liquid epoxy resins gives rise to products featuring high adhesion properties and which can be applied by spatula process or by spraying. When ITAMID C is used with an epoxy resin with an epoxy equivalent weight of around 190, the normal ratio used is 60 p.p. of epoxy to 40 p.p. of polyaminoamide. However, this ratio can be varied, even widely, whilst bearing in mind that a greater percentage of polyamine resin increases flexibility but reduces resistance to chemicals. In solvent systems ITAMID C is usually combined with a solid epoxy resin whose pot-life changes with the percentage of dryness and temperature in addition to the type of epoxy used. For example, a formulation at dryness 40% with an epoxy resin of epoxy weight equivalent 475 and a ratio of 75/25 epoxy to polyamine will exhibit a pot-life at room temperature of about two days. 收起 | Request Sample |
| ITAMID C/F | DKSH | ITAMID C/F is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C/F is used above all in the field of anticorrosion paints, protective coatings with high ...展开 ITAMID C/F is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C/F is used above all in the field of anticorrosion paints, protective coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces. ITAMID C/F, can be dissolved readily in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. In solvent free systems, ITAMID C/F when used combined with liquid epoxy resins gives rise to products featuring high adhesion properties and which can be applied by spatula process or by spraying. When ITAMID C/F is used with an epoxy resin with an epoxy equivalent weight of around 190, the normal ratio used is 60 p.p. of epoxy to 40 p.p. of polyaminoamide. However, this ratio can be varied, even widely, whilst bearing in mind that a greater percentage of polyamine resin increases flexibility but reduces resistance to chemicals. In solvent systems ITAMID C/F is usually combined with a solid epoxy resin whose pot-life changes with the percentage of dryness and temperature in addition to the type of epoxy used. For example, a formulation at dryness 40% with an epoxy resin of epoxy weight equivalent 475 and a ratio of 75/25 epoxy to polyamine will exhibit a pot-life at room temperature of about two days. 收起 | Request Sample |
| ITAMID D | DKSH | ITAMID D is a rather fluid polyaminoamide resin which is used in combination with epoxy resins, mainly liquid ones, to obtain hardening products even at room temperature and which are used above all in the field of reactive adhesives, solvent free coating...展开 ITAMID D is a rather fluid polyaminoamide resin which is used in combination with epoxy resins, mainly liquid ones, to obtain hardening products even at room temperature and which are used above all in the field of reactive adhesives, solvent free coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces and good thermal resistance. ITAMID D, which is normally used neat, however dissolves readily in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. The low viscosity of ITAMID D when used in combination with liquid epoxy resins gives rise to products which can be applied even by processes of spatula, spraying and pouring. When ITAMID D is used in combination with an epoxy resin with a epoxy equivalent weight of around 190, depending on the applications the ratio between epoxy and polyamine may vary between 65/35 and 75/25 with pot-lives varying between 110 and 130 minutes. It must however be keep in mind that a higher percentage of polyamine resin increases flexibility but reduces the resistance to chemical agents. 收起 | Request Sample |
| ITAMID FL 560 | DKSH | ITAMID FL 560 is a modified polyamide-imidazolinic hardner for epoxy resins. It can be used for primers or adhesion promoters. Phenol free, Bisphenol A free, High adhesion on wet concrete and Very good handling. | Request Sample |
| ITAMID FL 560S | DKSH | ITAMID FL 560S is a modified polyamide-imidazolinic hardner for epoxy resins. It can be used for primers or adhesion promoters. Phenol free, Bisphenol A free, High adhesion on wet concrete, Quick Shore D development also at low temperature and Very good h...展开 ITAMID FL 560S is a modified polyamide-imidazolinic hardner for epoxy resins. It can be used for primers or adhesion promoters. Phenol free, Bisphenol A free, High adhesion on wet concrete, Quick Shore D development also at low temperature and Very good handling. 收起 | Request Sample |
| ITAMID FL300 | DKSH | ITAMID FL300 is a liquid epoxy resin hardener made up of low viscosity polyaminoamide resin. ITAMID FL300 is to be found used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses,...展开 ITAMID FL300 is a liquid epoxy resin hardener made up of low viscosity polyaminoamide resin. ITAMID FL300 is to be found used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses, paints and floorings. Compared with traditional hardeners, ITAMID FL300 exhibits lower sensitivity to carbonatation and higher reactivity. Hardening times can be considerably reduced by including into the formulate either appropriate accelerator substances (e.g. 2-3% of tris(dimethylaminomethyl)phenol) or fastcure hardener like ITAMINE M150 or ITAMINE MB501. 收起 | Request Sample |
| ITAMID FL31 | DKSH | ITAMID FL31 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL31 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings...展开 ITAMID FL31 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL31 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings. Compared with traditional hardeners, ITAMID FL31 exhibits no sensitivity to carbonatation and higher reactivity. Hardening times can be considerably reduced by including into the formulate either appropriate accelerator substances (e.g. 2-3% of tris(dimethylaminomethyl)phenol) or fastcure hardener like ITAMINE M160 or ITAMINE MB501. 收起 | Request Sample |
| ITAMID FL32 | DKSH | ITAMID FL32 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL32 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings...展开 ITAMID FL32 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL32 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings. Compared with traditional hardeners, ITAMID FL32 exhibits no sensitivity to carbonatation and higher reactivity. Hardening times can be considerably reduced by including into the formulate either appropriate accelerator substances (e.g. 2-3% of tris(dimethylaminomethyl)phenol) or fastcure hardener like ITAMINE M160 or ITAMINE MB501. 收起 | Request Sample |
| ITAMID FL328 | DKSH | ITAMID FL328 is a liquid epoxy resin hardener made up of low viscosity, modified polyaminoamide adduct. ITAMID FL328 allow the dispersion of epoxy resin in water. ITAMID FL328 is used in the formulation of epoxy mortars (for laying tiles, repair of concre...展开 ITAMID FL328 is a liquid epoxy resin hardener made up of low viscosity, modified polyaminoamide adduct. ITAMID FL328 allow the dispersion of epoxy resin in water. ITAMID FL328 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.) and primer. 收起 | Request Sample |
| ITAMID FL40/S | DKSH | ITAMID FL40/S is a liquid epoxy resin hardener made up of low viscosity polyaminoamide-imidazoline resin. ITAMID FL40/S is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masse...展开 ITAMID FL40/S is a liquid epoxy resin hardener made up of low viscosity polyaminoamide-imidazoline resin. ITAMID FL40/S is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses, paints and floorings. Compared with traditional hardeners, ITAMID FL40/S exhibits lower sensitivity to carbonatation and lower reactivity, i.e. it gives longer utilisation and hardening times. 收起 | Request Sample |
| ITAMID FL41W3 | DKSH | ITAMID FL41W3 is a liquid epoxy resin hardener made up of a modified, low viscosity polyaminoamide resin. ITAMID FL41W3 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulatio...展开 ITAMID FL41W3 is a liquid epoxy resin hardener made up of a modified, low viscosity polyaminoamide resin. ITAMID FL41W3 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulations and paints. Compared with traditional hardeners, ITAMID FL41W3 exhibits improved resistance to chemical agents and dilute inorganic acids, and pronounced capacity for reaction at low temperatures and in presence of water. 收起 | Request Sample |
| ITAMID FL520 | DKSH | ITAMID FL520, is a liquid epoxy resin modified polyaminoamide-imidazoline. With liquid epoxy resins can be used for primers or adhesion promoters in concrete substrate. It is a solvent free and it can be applied in wet substrate. The principle characteris...展开 ITAMID FL520, is a liquid epoxy resin modified polyaminoamide-imidazoline. With liquid epoxy resins can be used for primers or adhesion promoters in concrete substrate. It is a solvent free and it can be applied in wet substrate. The principle characteristics are: low viscosity, very good corrosion protection, good making propriety, good adhesion in wet substrate with high percentage of humidity and slight flexibility with high levels of mortar stability. 收起 | Request Sample |
| ITAMID FL520/S | DKSH | ITAMID FL520/S is a liquid epoxy resin modified polyaminoamide-imidazoline. With liquid epoxy resins can be used for primers or adhesion promoters in concrete substrate. It can be applied in wet substrate, in the formulation of adhesives, encapsulations a...展开 ITAMID FL520/S is a liquid epoxy resin modified polyaminoamide-imidazoline. With liquid epoxy resins can be used for primers or adhesion promoters in concrete substrate. It can be applied in wet substrate, in the formulation of adhesives, encapsulations and paints. The principle characteristics are: low viscosity, very good corrosion protection, good making propriety, good adhesion in wet substrate with high percentage of humidity, slight flexibility with high levels of mortar stability and good capacity for reaction at low temperatures and high percentage of humidity. 收起 | Request Sample |
| ITAMID FL540 | DKSH | ITAMID FL540, is a liquid epoxy resin hardener made up of a low viscosity, modified polyaminoamide adduct. ITAMID FL540 is used in the formulation of adhesives, epoxy mortars and paints even on wet surfaces and under water. | Request Sample |
| ITAMID FL550/S | DKSH | ITAMID FL550/S is a liquid epoxy resin modified polyaminoamide-imidazoline. With liquid epoxy resins can be used for primers or adhesion promoters in concrete substrate. It can be applied in wet substrate, in the formulation of adhesives, encapsulations a...展开 ITAMID FL550/S is a liquid epoxy resin modified polyaminoamide-imidazoline. With liquid epoxy resins can be used for primers or adhesion promoters in concrete substrate. It can be applied in wet substrate, in the formulation of adhesives, encapsulations and paints. The principle characteristics are: low viscosity, very good corrosion protection, good making propriety, good adhesion in wet substrate with high percentage of humidity, slight flexibility with high levels of mortar stability and good capacity for reaction at low temperatures and high percentage of humidity. 收起 | Request Sample |
| ITAMID M20P | DKSH | The ITAMID M20P is a solid polyamide resin excellent thermal stability which are mainly used in adhesives Fusion (Hot Melts). The ITAMID M20P is particularly useful for the formulation of inks “flex” and “rotogravure” where over membership, gloss and wate...展开 The ITAMID M20P is a solid polyamide resin excellent thermal stability which are mainly used in adhesives Fusion (Hot Melts). The ITAMID M20P is particularly useful for the formulation of inks “flex” and “rotogravure” where over membership, gloss and water resistance, are also required a higher resistance to ink “gel”, one of his quick recovery from the phase of “gel” and a resistance to “blocking”. The ITAMID M20P has an excellent solubility with ethyl alcohol, and is also cosolvent- soluble systems, typically mixtures of alcohols and aliphatic hydrocarbons and / or aromatic. The ITAMID M20P is compatible with most of the phenolic resins, maleic, that tonic, waxes and plasticizers monometric. The ITAMID M20P is generally incompatible with polyesters, vinyl resins and urea. 收起 | Request Sample |
| ITAMID M21P | DKSH | The ITAMID M21P is a solid polyamide resin excellent thermal stability which are mainly used in adhesives Fusion (Hot Melts). The ITAMID M21P is particularly useful for the formulation of inks “flex” and “rotogravure” where over membership, gloss and wate...展开 The ITAMID M21P is a solid polyamide resin excellent thermal stability which are mainly used in adhesives Fusion (Hot Melts). The ITAMID M21P is particularly useful for the formulation of inks “flex” and “rotogravure” where over membership, gloss and water resistance, are also required a higher resistance to ink “gel”, one of his quick recovery from the phase of “gel” and a resistance to “blocking”. The ITAMID M21P has an excellent solubility with ethyl alcohol, and is also cosolvent- soluble systems, typically mixtures of alcohols and aliphatic hydrocarbons and / or aromatic. The ITAMID M21P is compatible with most of the phenolic resins, maleic, that tonic, waxes and plasticizers monometric. The ITAMID M21P is generally incompatible with polyesters, vinyl resins and urea. 收起 | Request Sample |
| ITAMID M30P | DKSH | ITAMID M30P is a thermoplastic polyamide resin for use in flexographic or gravure lamination inks. The product shows excellent adhesion to many substrates (metal or polyolefin). The product has excellent flexibility and is particularly suitable for bondin...展开 ITAMID M30P is a thermoplastic polyamide resin for use in flexographic or gravure lamination inks. The product shows excellent adhesion to many substrates (metal or polyolefin). The product has excellent flexibility and is particularly suitable for bonding of PVC. 收起 | Request Sample |
| ITAMINE CA165 | DKSH | ITAMINE CA 165 is a low viscosity, phenol free, modified cicloalifatic polyamine hardener for solvent free systems or coatings. ITAMINE CA 165 cure fast and produce coatings and flooring with a good aesthetic appearance and high gloss, even at low cure te...展开 ITAMINE CA 165 is a low viscosity, phenol free, modified cicloalifatic polyamine hardener for solvent free systems or coatings. ITAMINE CA 165 cure fast and produce coatings and flooring with a good aesthetic appearance and high gloss, even at low cure temperatures. ITAMINE CA 165 has good resistance to water spotting and also features good blush resistance. 收起 | Request Sample |
| ITAMINE CA30 | DKSH | ITAMINE CA30 is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA30 is additionally suitable for applica...展开 ITAMINE CA30 is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA30 is additionally suitable for application systems of pouring, injection (concrete) and in high filled formulates (e.g. epoxy-tar systems): ABSENCE OF PHENOL AND AROMATIC AMINES, EXCELLENT FETURES OF STRENGTH AND RESISTANCE TO CHEMICALS, EXCELLENT SMOOTH FLOW (SELF-LEVELLING) and LOW VISCOSITY. 收起 | Request Sample |
| ITAMINE CA30LA | DKSH | ITAMINE CA30LA is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA30LA is additionally suitable for app...展开 ITAMINE CA30LA is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA30LA is additionally suitable for application systems of pouring, injection (concrete) and in high filled formulates (e.g. epoxy-tar systems). 收起 | Request Sample |
| ITAMINE CA51L | DKSH | ITAMINE CA51L is an Epoxy Resins curing agent based on cycloaliphatic amines, it is particularly indicated for room temperature, solvent free systems or coatings. The main properties of ITAMINE CA51L are the following: GOOD LEVELLING AND WETTING CAPACITY,...展开 ITAMINE CA51L is an Epoxy Resins curing agent based on cycloaliphatic amines, it is particularly indicated for room temperature, solvent free systems or coatings. The main properties of ITAMINE CA51L are the following: GOOD LEVELLING AND WETTING CAPACITY, REDUCED CARBONATATION, GOOD ADHESION EVEN ON WET SURFACES, COMPLETE AND RAPID HARDENING EVEN AT 5°C AND WIT H HIGH RELATIVE HUMIDITY (95%), STABLE COLOUR, HIGH GLOSS and GOOD MECHANICAL AND CHEMICAL RESISTANCE. 收起 | Request Sample |
| ITAMINE CA60 | DKSH | ITAMINE CA60 is an Epoxy Resins curing agent based on cycloaliphatic amine adduct, it is particularly indicated for room temperature, solvent free systems, glazes and food covering with low fatty content for example wine and fresh water tank. | Request Sample |
| ITAMINE CA70 | DKSH | ITAMINE CA70 is an Epoxy Resins curing agent based on cycloaliphatic amines. The main properties of ITAMINE CA70 are the following: GOOD LEVELLING AND WETTING CAPACITY, REDUCED CARBONATATION, GOOD ADHESION EVEN ON WET SURFACES, COMPLETE AND RAPID HARDENIN...展开 ITAMINE CA70 is an Epoxy Resins curing agent based on cycloaliphatic amines. The main properties of ITAMINE CA70 are the following: GOOD LEVELLING AND WETTING CAPACITY, REDUCED CARBONATATION, GOOD ADHESION EVEN ON WET SURFACES, COMPLETE AND RAPID HARDENING EVEN AT 5°C AND WIT H HIGH RELATIVE HUMIDITY (95%), STABLE COLOUR, HIGH GLOSS and GOOD MECHANICAL AND CHEMICAL RESISTANCE. ITAMINE CA70 is also indicated for food covering with low fatty content for example wine and fresh water tank. 收起 | Request Sample |
| ITAMINE CA80 | DKSH | ITAMINE CA80 is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA80 is additionally suitable for applica...展开 ITAMINE CA80 is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA80 is additionally suitable for application systems of pouring, injection (concrete) and in high filled formulates (e.g. epoxy-tar systems) The main properties of this hardener are the following: COMPLETE CURING EVEN AT LOW TEMPERATURE (0°C), ABSENCE OF PHENOL AND AROMATIC AMINES, EXCELLENT FETURES OF STRENGTH AND RESISTANCE TO CHEMICALS, EXCELLENT SMOOTH FLOW (SELF-LEVELLING) and LOW VISCOSITY. 收起 | Request Sample |
| ITAMINE FL43 | DKSH | ITAMINE FL43 is an liquid epoxy resin hardener made up of modified aliphatic polyamines. ITAMINE FL43 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulations and paints. Com...展开 ITAMINE FL43 is an liquid epoxy resin hardener made up of modified aliphatic polyamines. ITAMINE FL43 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulations and paints. Compared with traditional hardeners, such as polyaminoamide resins, ITAMINE FL43 exhibits greater reactivity, resistance to chemical agents and dilute inorganic acids, and pronounced capacity for reaction at low temperatures. Finally, comparing the classical amine hardeners, which are normally classified as “corrosive” substances, ITAMINE FL43 exhibits lower hazard (it is actually classified only as an “irritating” substance). 收起 | Request Sample |
| KLX 7997 | Nokxeller Quimica Ltda | KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for mo...展开 KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for modifying pressure sensitive textile & construction adhesives, neoprene, EVA and other plastic & leather primer applications. Once crosslinked shows outstanding water resistance. 收起 | |
| Luna ACMO | DKSH | Luna ACMO has been used for UV and EB curable resins (primarily inks and coatings). It has been found that ACMO displays similar properties as other reactive diluent monomers, such as N-vinyl pirrolidone (NVP), but exceeds them in performance and safety. ...展开 Luna ACMO has been used for UV and EB curable resins (primarily inks and coatings). It has been found that ACMO displays similar properties as other reactive diluent monomers, such as N-vinyl pirrolidone (NVP), but exceeds them in performance and safety. Luna ACMO is used as a reactive diluent monomer for UV, EB curable resins in radicalic systems. Luna ACMO has good compatibility with oligomers, multi-functional acrylates, and resin components having a quicker hardening speed in the polymerization process than Isobornyl Acrylate and Phenoxyethyl Acrylate. Luna ACMO provides UV, EB curable resins made with a low hygroscopicity and good resistance to alkali, acids, and solvents. Moreover it has a nitrogen radical, which prevents generation of ozone inhibiting polymerization. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna ADH | DKSH | Luna ADH is mainly used as Chain Extender in waterbourne polyurethane systems. Commonly it is used in combination with Luna DAAM. Can also be used as a chain Extender for waterbourne PU Systems. This product is available in Europe, Asia and North America. | Request Sample |
| Luna DAAM | DKSH | Luna DAAM is a functional monomer. It readily homopolymerises as well as copolymerises with a variety of co-monomers. Poly (diacetone acrylamide) has a high water absorption. Resulting polymers have high hydrophilicity, air permeability, transparency and ...展开 Luna DAAM is a functional monomer. It readily homopolymerises as well as copolymerises with a variety of co-monomers. Poly (diacetone acrylamide) has a high water absorption. Resulting polymers have high hydrophilicity, air permeability, transparency and UV stability. Luna DAAM can be used in the following areas: paper treatment, adhesives, water borne coatings (cross linkable at room temperature), photosensitive resins, crosslinking agents, textile treatment, hairsprays and resin modifier. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna DCD 10 | DKSH | Luna DCD 10 is an ultra-micronized grade of Dicyandiamide containing 1.6% of anti-blocking agent to prevent caking and improving application. It is designed for use as a latent curing agent for epoxy resins. This product is available in Europe, Asia and N...展开 Luna DCD 10 is an ultra-micronized grade of Dicyandiamide containing 1.6% of anti-blocking agent to prevent caking and improving application. It is designed for use as a latent curing agent for epoxy resins. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna EEP | DKSH | Luna EEP is a slow evaporation ether-ester urethane grade solvent with excellent activity for a wide range of coating formulations. Its linear structure and the propionyl group in the center of the molecule give this material an outstanding solvent perfor...展开 Luna EEP is a slow evaporation ether-ester urethane grade solvent with excellent activity for a wide range of coating formulations. Its linear structure and the propionyl group in the center of the molecule give this material an outstanding solvent performance as high solvent activity, slow evaporation rates, exceptional flow and leveling, as well as a high electrical resistance. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna ESBO A | DKSH | Luna ESBO A is an epoxidized soya Oil Acrylate oligomer. Used for UV & EB curable systems, as reactive effective wetter/coupling agent. Key benefits are in UV & EB inks and coatings to improve adhesion and solve delamination issues, to improve flexibility...展开 Luna ESBO A is an epoxidized soya Oil Acrylate oligomer. Used for UV & EB curable systems, as reactive effective wetter/coupling agent. Key benefits are in UV & EB inks and coatings to improve adhesion and solve delamination issues, to improve flexibility and to bring high functionality. Moderate cure speed, with low odor and skin irritancy. Good compatibility with non polar substrates. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna PTSI P | DKSH | Luna PTSI P is a low-viscosity reactive additive used as a water scavenger in the formulation of specialty urethane products, including adhesives, sealants and coatings. Luna PTSI P also provides storage stabilization of purified diisocyanates against det...展开 Luna PTSI P is a low-viscosity reactive additive used as a water scavenger in the formulation of specialty urethane products, including adhesives, sealants and coatings. Luna PTSI P also provides storage stabilization of purified diisocyanates against deterioration and discoloration. The use of Luna PTSI P in the formulation process prevents moisture-related problems. Luna PTSI P reacts rapidly with excess water to form the corresponding carbamic acid, which in turn, undergoes immediate decomposition to form carbon dioxide and non-reacting p-toluenesulfonamide. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna SI ICPTES | DKSH | Luna SI ICPTES is an isocyanate functional silane. It is used for the functionalization of numerous compounds with active hydrogen atoms. Luna SI ICPTES hydrolyzes in the presence of moisture to form silanols, which can react with themselves to produce si...展开 Luna SI ICPTES is an isocyanate functional silane. It is used for the functionalization of numerous compounds with active hydrogen atoms. Luna SI ICPTES hydrolyzes in the presence of moisture to form silanols, which can react with themselves to produce siloxanes. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-add K C404 | DKSH | Luna-add K C404 is a masterbatch of a catalyst for carboxyl / epoxy reaction in saturated carboxylated polyester. Active content: 10%. It is use as catalyst for the formulation of interior and exterior protective thermosetting powder coatings, HYBRID, TGI...展开 Luna-add K C404 is a masterbatch of a catalyst for carboxyl / epoxy reaction in saturated carboxylated polyester. Active content: 10%. It is use as catalyst for the formulation of interior and exterior protective thermosetting powder coatings, HYBRID, TGIC or cured with glycidylesters. 收起 | Request Sample |
| Luna-add K C405-SD | DKSH | Luna-add K C405-SD is a masterbatch of a catalyst for carboxyl / epoxy reaction in superdurable saturated carboxylated polyester resin. Active content: 5%. It is use as catalyst for the formulation of exterior protective thermosetting powder coatings, cur...展开 Luna-add K C405-SD is a masterbatch of a catalyst for carboxyl / epoxy reaction in superdurable saturated carboxylated polyester resin. Active content: 5%. It is use as catalyst for the formulation of exterior protective thermosetting powder coatings, cured with TGIC or with glycidylesters. 收起 | Request Sample |
| Luna-add RC961 | DKSH | Luna-add RC961 is a micronized amide wax to improve degassing of powder coatings applied over porous substrates. The additive also helps to improve surface slip and optimizes the orientation of aluminum modified powder in metallic formulations. This produ...展开 Luna-add RC961 is a micronized amide wax to improve degassing of powder coatings applied over porous substrates. The additive also helps to improve surface slip and optimizes the orientation of aluminum modified powder in metallic formulations. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-cat 7318 | DKSH | Luna-cat 7318 is a new anti-yellowing, low temperature curing accelerator, designed for powder coatings based on PES/TGIC and PES/Hybrid. The product is a catalyst to reduce curing temperatures or shorten curing times. This product is available in Europe,...展开 Luna-cat 7318 is a new anti-yellowing, low temperature curing accelerator, designed for powder coatings based on PES/TGIC and PES/Hybrid. The product is a catalyst to reduce curing temperatures or shorten curing times. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-charge 2485 | DKSH | Luna-charge 2485 is a polar fatty acid derivative used as charge-enhancing additive to improve powder coating transfer-efficiency and minimize Faraday-cage effects during Corona spray applications. This product can be used as a replacement for LancoStat 3...展开 Luna-charge 2485 is a polar fatty acid derivative used as charge-enhancing additive to improve powder coating transfer-efficiency and minimize Faraday-cage effects during Corona spray applications. This product can be used as a replacement for LancoStat 308. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-clear 202 OP | DKSH | Luna-clear 202 OP is an organic phosphorous compound, which is used as an anti-yellowing agent in acrylic and epoxy/polyester powder coatings. Luna-clear 202 OP anti-yellowing properties are effective in all organic powder coatings that contain epoxy of g...展开 Luna-clear 202 OP is an organic phosphorous compound, which is used as an anti-yellowing agent in acrylic and epoxy/polyester powder coatings. Luna-clear 202 OP anti-yellowing properties are effective in all organic powder coatings that contain epoxy of glycidylmethacrylate groups. It prevents yellowing in directly heated ovens and yellowing, which occures on parellel coating lines with different chemistries. Luna-clear 202 OP is halogen-free and contains no heavy metals. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-cryl 550 | DKSH | Luna-cryl 550 is a glycidyl-functional acrylic hardener designed to produce low gloss, exterior-durable polyester powder coatings. Benefits include consistent gloss, smooth matte appearance and consistent performance. “One-shot” low gloss coatings can be ...展开 Luna-cryl 550 is a glycidyl-functional acrylic hardener designed to produce low gloss, exterior-durable polyester powder coatings. Benefits include consistent gloss, smooth matte appearance and consistent performance. “One-shot” low gloss coatings can be produced by using Luna-cryl 550 in conjunction with polyesters having acid values between 30-35 mg KOH/g. Standard polyester resins used for TGIC, HAA, GMA or Araldite PT-910 powder coatings are well suited for use with Lunacryl 550. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-cryl 700 | DKSH | Luna-cryl 700 is a glycidyl functional acrylic resin which can be used as a curing agent for saturated carboxyl polyesters having low acid values (i.e., 33) to produce exterior durable powder coatings with dead matte to low gloss finishes (60° gloss range...展开 Luna-cryl 700 is a glycidyl functional acrylic resin which can be used as a curing agent for saturated carboxyl polyesters having low acid values (i.e., 33) to produce exterior durable powder coatings with dead matte to low gloss finishes (60° gloss range 0–20). This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-cryl 710 | DKSH | Luna-cryl 710 is a glycidyl functional acrylic resin which can be used as a curing agent for saturated carboxyl polyesters having low acid values (i.e., 33) to produce exterior durable powder coatings with dead matte to low gloss finishes (60° gloss range...展开 Luna-cryl 710 is a glycidyl functional acrylic resin which can be used as a curing agent for saturated carboxyl polyesters having low acid values (i.e., 33) to produce exterior durable powder coatings with dead matte to low gloss finishes (60° gloss range 0–20). Luna-cryl 710 offers improved flexibility as compared to its predecessor, Luna-cryl 700. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-cure MACM | DKSH | Luna-cure MACM is a Cycloaliphatic amine. It is a colorless to yellow liquid, free of suspended matter. It is mainly used for curing of low viscosity epoxy resins for low solvent or solvent free formulations. Applications include high performance coatings...展开 Luna-cure MACM is a Cycloaliphatic amine. It is a colorless to yellow liquid, free of suspended matter. It is mainly used for curing of low viscosity epoxy resins for low solvent or solvent free formulations. Applications include high performance coatings (marine, anti-corrosion) and composites, and encapsulating resins for electronics. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-cure PACM | DKSH | Luna-cure PACM is a cycloaliphatic diamine. Luna-cure PACM is mainly used as a hardener for epoxies. The curing of epoxy resins at high temperatures leads to excellent mechanical properties and good resistance against alkalis, acids, hydrocarbon solvents ...展开 Luna-cure PACM is a cycloaliphatic diamine. Luna-cure PACM is mainly used as a hardener for epoxies. The curing of epoxy resins at high temperatures leads to excellent mechanical properties and good resistance against alkalis, acids, hydrocarbon solvents and water. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-cure RFE | DKSH | Lunacure RFE is a highly efficient crosslinker. It can be used for adhesives based on polyurethane, synthetic or natural rubber. It also improves adhesion to rubber-based substrates. This product is available in Europe, Asia and North America. | Request Sample |
| Luna-flow C-85 | DKSH | Luna-flow C-85 is a castor oil derivative, which is used to significantly reduce the melt viscosity and increase the open time of powder coatings during the molten stage of the curing process. This product is available in Europe, Asia and North America. | Request Sample |
| Luna-flow K F505 | DKSH | Luna-flow K F505 is a masterbatch of an acrylic polymer in carboxylated saturated polyester. It is used as FCA, flow control agent in powder coatings. Active content: 10% of thermoplastic acrylic polymer. | Request Sample |
| Luna-flow K F615 | DKSH | Luna-flow K F615 is a masterbatch of an acrylic polymer in hydroxylated saturated polyester. It is used as FCA, flow control agent in powder coatings. Active content: 15% of thermoplastic acrylic polymer. | Request Sample |
| Luna-fos 126J | DKSH | Luna-fos 126J is a high performance organo-phosphie processing stabilizer which protects coatings from thermo-oxidative degradation by decomposing hydroperoxides to form non-radical, non-reactive products. This product is available in Europe, Asia and Nor...展开 Luna-fos 126J is a high performance organo-phosphie processing stabilizer which protects coatings from thermo-oxidative degradation by decomposing hydroperoxides to form non-radical, non-reactive products. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-fos 168 | DKSH | Luna-fos 168 is a thermally and hydrolytically stable secondary anti-oxidant that decomposes peroxy radicals and hydroperoxides formed during prosessing. Luna-fos 168 is FDA approved for incidental direct food contact. This product is available in Europe,...展开 Luna-fos 168 is a thermally and hydrolytically stable secondary anti-oxidant that decomposes peroxy radicals and hydroperoxides formed during prosessing. Luna-fos 168 is FDA approved for incidental direct food contact. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-glyme DMM | DKSH | Luna-glyme DMM is an aprotic solvent which is relatively inert and can be used in protonsensitive systems such as water-based polyurethane coatings. Chemical name: Dipropylene Glycol Dimethylether, Dimethoxy dipropyleneglycol, CH3OCH2CH(CH3)OCH2CH(CH3)OCH...展开 Luna-glyme DMM is an aprotic solvent which is relatively inert and can be used in protonsensitive systems such as water-based polyurethane coatings. Chemical name: Dipropylene Glycol Dimethylether, Dimethoxy dipropyleneglycol, CH3OCH2CH(CH3)OCH2CH(CH3)OCH3. This product is available in Europe, Asia and North America. 收起 | Request Sample |
