| Antioxidant SN-1 | Tiarco Chemical | Antioxidant SN-1 is a highly active, non-discoloring secondary antioxidant with low volatility. It can be used with primary phenolic and amine antioxidants. Unlike other thioesters, this product may be used in both uncured and sulfur cured latex compounds...展开 Antioxidant SN-1 is a highly active, non-discoloring secondary antioxidant with low volatility. It can be used with primary phenolic and amine antioxidants. Unlike other thioesters, this product may be used in both uncured and sulfur cured latex compounds, and the maximum benefits are best noticed when used in combination with a primary antioxidant in natural and synthetic polymers. It is used in light colored or black compounds such as carpet backing foams, scrim adhesives, SBR latex stabilization, rubber based adhesives, footwear compounds and mechanical goods, and more. 收起 | |
| CI Pigment Orange 20 (77202) | James M. Brown Ltd. | CI Pigment Orange 20 (77202) is a pigment based on a cadmium sulphoselenide system. This product is most commonly used as an orange coloring in artists' color and ceramic coating applications. | |
| CI Pigment Red 108 (77202) | James M. Brown Ltd. | CI Pigment Red 108 (77202) is a pigment based on a cadmium sulphoselenide system. This product is most commonly used as a red coloring in artists' color and ceramic coating applications. | |
| CI Pigment White 21 (77120) | James M. Brown Ltd. | CI Pigment White 21 (77120) is a pigment based on a solid solution of cadmium zinc sulphide. This product is most commonly used as a white coloring in artists' color and ceramic coating applications. | |
| CI Pigment Yellow 35 (77205) | James M. Brown Ltd. | CI Pigment Yellow 35 (77205) is a pigment based on a solid solution of cadmium zinc sulphide. This product is most commonly used as a yellow coloring in artists' color and ceramic coating applications. | |
| H-Sperse® 2000A | Harcros Chemicals, Inc. | H-Sperse® 2000A is a built for purpose dispersant which has been phosphated to give it unique anionic characteristics. The ionic phosphate groups bind tightly to a variety of inorganic materials, while the non-ionic hydrophobe portion will prevent agglome...展开 H-Sperse® 2000A is a built for purpose dispersant which has been phosphated to give it unique anionic characteristics. The ionic phosphate groups bind tightly to a variety of inorganic materials, while the non-ionic hydrophobe portion will prevent agglomeration and flocculation of many types of inorganic particulate materials. It is APE/NPE free, and exhibits very low toxicity. The phosphate functional group promotes excellent adhesion to the inorganic particulate giving good dispersion stability under difficult conditions, such as highly saline solutions. The phosphate groups can also enhance fire retardancy. In addition, the phosphate groups can also enhance corrosion resistance in coatings applied to metals. 收起 | |
| H-Sperse® 2000N | Harcros Chemicals, Inc. | H-Sperse® 2000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particulates and ...展开 H-Sperse® 2000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particulates and pigments in aqueous applications. It is especially useful for dispersing carbon black in inks and paints. Dispersions made using this material demonstrate long term viscosity stability. Typically, higher loadings can be achieved, with lower viscosity, compared to other commonly used dispersants. It is especially suitable for making carbon black dispersions for higher end ink and coatings applications. 收起 | |
| H-Sperse® 3000N | Harcros Chemicals, Inc. | H-Sperse® 3000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particles and pig...展开 H-Sperse® 3000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particles and pigments in aqueous applications. It is especially useful for dispersing carbon black in inks and paints. Dispersions made using this material demonstrate long term viscosity stability. Typically, higher loadings can be achieved, with lower viscosity, compared to other commonly used dispersants. It is especially suitable for making dispersions of carbon black for higher end ink and coatings applications. 收起 | |
| H-Sperse® 4000N | Harcros Chemicals, Inc. | H-Sperse® 4000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Dispersions made using this material demonstrate lon...展开 H-Sperse® 4000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Dispersions made using this material demonstrate long term viscosity stability. It is especially suitable for making carbon black dispersions for higher end ink and coatings applications. Excellent color strength may be achieved by using H-Sperse® 4000N. 收起 | |
| H-Sperse® 5500N | Harcros Chemicals, Inc. | H-Sperse® 5500N is a non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. The hydrophobe used to make this material will attach to a wide variety of different particles making it valuble as a gener...展开 H-Sperse® 5500N is a non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. The hydrophobe used to make this material will attach to a wide variety of different particles making it valuble as a general purpose dispersant. Dispersions made using H-Sperse® 5000N demonstrate long term viscosity stability. As a non-ionic dispersant, it makes dispersions that will be stable under a wide range of pH conditions, both acidic and basic. Viscosity may vary with pH, so this must be explored to determine the best pH for the application. It is especially suitable for making dispersions of carbon black. 收起 | |
| Harcryl® 1228 | Harcros Chemicals, Inc. | Harcryl® 1228 is a unique, functional, acrylic monomer consisting of mono- and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows Harcryl® 1228 to be easily incorporated into a variety of polymer system...展开 Harcryl® 1228 is a unique, functional, acrylic monomer consisting of mono- and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows Harcryl® 1228 to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 provides for application in hydrophilic formulations as well. The primary use area for Harcryl® 1228 is emulsion polymerization. The phosphate functional group promotesadhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 to easily incorporate into many coating systems. 收起 | |
| Harcryl® 1228 M | Harcros Chemicals, Inc. | Harcryl® 1228 M is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) The product is inhibited with 400 ppm of added hydroquinone. Harcryl® 1228 M is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorpor...展开 Harcryl® 1228 M is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) The product is inhibited with 400 ppm of added hydroquinone. Harcryl® 1228 M is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M more hydrophilic than Harcryl® 1228. The main application for Harcryl® 1228M is emulsion polymerization. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 M to be easily incorporated into many coating systems. 收起 | |
| Harcryl® 1228 M UV | Harcros Chemicals, Inc. | Harcryl® 1228 M UV is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) Harcryl® 1228 M UV is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mo...展开 Harcryl® 1228 M UV is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) Harcryl® 1228 M UV is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M UV more hydrophilic than Harcryl® 1228. Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 M UV to be easily incorporated into many coating systems. including UV & Radiation curable coatings. 收起 | |
| Harcryl® 1228 UV | Harcros Chemicals, Inc. | Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The po...展开 Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 UV provides for application in hydrophilic formulations as well. The main application for Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 UV to easily incorporate into many coating systems including UV & Radiation curable coatings. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| Octocure 462 | Tiarco Chemical | Octocure 462 is an aqueous zinc oxide dispersion readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing SBR and natural latex rubber. | |
| Octocure 487 | Tiarco Chemical | Octocure 487 is an aqueous anionic dispersion of tetramethylthiuram disulfide. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for a sulfurless cure. This product m...展开 Octocure 487 is an aqueous anionic dispersion of tetramethylthiuram disulfide. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for a sulfurless cure. This product may also be used at lower concentrations as a slow precure accelerator in natural latex. 收起 | |
| Octocure 530 | Tiarco Chemical | Octocure 530 is an aqueous anionic dispersion of diphenylguanidine that functions as a ready-to-use accelerator in latex compounding. It is wet milled to a fine particle size for maximum activity. It works in low concentrations as a strong secondary accel...展开 Octocure 530 is an aqueous anionic dispersion of diphenylguanidine that functions as a ready-to-use accelerator in latex compounding. It is wet milled to a fine particle size for maximum activity. It works in low concentrations as a strong secondary accelerator in SBR, neoprene, and nitrile latices. This product is typically used as an activator for MBT and other thiazole accelerators, or in conjunction with dithiocarbamates or thiocarbanilides. 收起 | |
| Octocure 551 | Tiarco Chemical | Octocure 551 is an aqueous anionic dispersion of N,N'-diphenylthiourea. This milled, 50% active thiocarbanalide dispersion is used in neoprene latex, natural rubber latex, and cement applications as a fast-curing accelerator. For neoprene latex, it is usu...展开 Octocure 551 is an aqueous anionic dispersion of N,N'-diphenylthiourea. This milled, 50% active thiocarbanalide dispersion is used in neoprene latex, natural rubber latex, and cement applications as a fast-curing accelerator. For neoprene latex, it is usually used in conjunction with diphenyl guanidine. 收起 | |
| Octocure 573 | Tiarco Chemical | Octocure 573 is an aqueous zinc oxide dispersion that can be readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing latex rubber. | |
| Octocure 803 | Tiarco Chemical | Octocure 803 is an aqueous zinc oxide dispersion that can be readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing latex rubber. | |
| Octocure ZBZ-42 | Tiarco Chemical | Octocure ZBZ-42 is an aqueous anionic dispersion of zinc dibenzyldithiocarbamate. It is 42% active and functions as a ready-to-use accelerator for latex compounding. It is typically used in SBR and natural latex compounds in conjunction with secondary acc...展开 Octocure ZBZ-42 is an aqueous anionic dispersion of zinc dibenzyldithiocarbamate. It is 42% active and functions as a ready-to-use accelerator for latex compounding. It is typically used in SBR and natural latex compounds in conjunction with secondary accelerators such as ZMBT. Octocure ZBZ-42 is ideal for vulcanization processes where the formation of volatile nitrosoamines needs to be reduced. 收起 | |
| Octocure ZDB-100 | Tiarco Chemical | Octocure ZDB-100 is a white to off-white powder composed of zinc di-n-butyldithiocarbamate. It functions as a primary accelerator for natural and synthetic polymers. It can be used in most natural rubber compounds for fast cure and high modulus. This prod...展开 Octocure ZDB-100 is a white to off-white powder composed of zinc di-n-butyldithiocarbamate. It functions as a primary accelerator for natural and synthetic polymers. It can be used in most natural rubber compounds for fast cure and high modulus. This product can also be applied in low doses in non-curing natural and SBR adhesive compounds as a non-discoloring antioxidant. 收起 | |
| Octocure ZDB-50 | Tiarco Chemical | Octocure ZDB-50 is an aqueous dispersion of zinc di-n-butyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. This product is commonly used in SBR and natural latex compounds for fast cure and high modulus...展开 Octocure ZDB-50 is an aqueous dispersion of zinc di-n-butyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. This product is commonly used in SBR and natural latex compounds for fast cure and high modulus. 收起 | |
| Octocure ZDB-50 CF | Tiarco Chemical | Octocure ZDB-50 CF is an aqueous anionic dispersion of zinc di-n-butyldithiocarbamate. Casein free and 50% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for fast cure and h...展开 Octocure ZDB-50 CF is an aqueous anionic dispersion of zinc di-n-butyldithiocarbamate. Casein free and 50% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for fast cure and high modulus. This product can also be used at low doses in noncuring natural and SBR latex compounds as a non-discoloring antioxidant. 收起 | |
| Octocure ZDE-50 | Tiarco Chemical | Octocure ZDE-50 is an aqueous anionic dispersion of zinc diethyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds in conjunction with equal amounts z...展开 Octocure ZDE-50 is an aqueous anionic dispersion of zinc diethyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds in conjunction with equal amounts zinc mercaptobenzothiazole. 收起 | |
| Octocure ZDIB-50 | Tiarco Chemical | Octocure ZDIB-50 is an aqueous liquid dispersion of zinc diisobutyldithiocarbamate. It is 50% active and functions as a ready-to-use ultra-accelerator for latex compounding. It is typically used in SBR and natural latex compounds for fast cure and high mo...展开 Octocure ZDIB-50 is an aqueous liquid dispersion of zinc diisobutyldithiocarbamate. It is 50% active and functions as a ready-to-use ultra-accelerator for latex compounding. It is typically used in SBR and natural latex compounds for fast cure and high modulus. As a secondary accelerator, this product works well with thiurams, thiazoles, and guanidines. Octocure ZDIB-50 may be used at low levels to increase cure rates of slower curing systems. It also serves as an effective free-radical emulsion polymerization shortstop in styrene-butadiene rubber (SBR) and acrylonitrile butadiene rubber (NBR) elastomer production. 收起 | |
| Octocure ZDM-50 | Tiarco Chemical | Octocure ZDM-50 is an aqueous anionic dispersion of zinc dimethyldithiocarbamate. It is 50 % active and functions as a ready-to-use accelerator for latex compounding. It provides moderately fast curing with good aging properties. This product is well suit...展开 Octocure ZDM-50 is an aqueous anionic dispersion of zinc dimethyldithiocarbamate. It is 50 % active and functions as a ready-to-use accelerator for latex compounding. It provides moderately fast curing with good aging properties. This product is well suited for use as an additive in the production of latex and latex based products. 收起 | |
| Octocure ZMBT-50 | Tiarco Chemical | Octocure ZMBT-50 is an aqueous anionic dispersion of zinc mercaptobenzothiazole. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This...展开 Octocure ZMBT-50 is an aqueous anionic dispersion of zinc mercaptobenzothiazole. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This product is well suited for use as an additive in the production of latex and latex based products. 收起 | |
| Octocure ZMBT-50 CF | Tiarco Chemical | Octocure ZMBT-50 CF is an aqueous anionic dispersion of zinc mercaptobenzothiazole. Casein free and 51% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithioca...展开 Octocure ZMBT-50 CF is an aqueous anionic dispersion of zinc mercaptobenzothiazole. Casein free and 51% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This product is well suited for use as an additive in the production of latex and latex based products. 收起 | |
| Octoguard FR-11 DF | Tiarco Chemical | Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiven...展开 Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. 收起 | |
| Octoguard FR-13 DF | Tiarco Chemical | Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiven...展开 Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. 收起 | |
| Octolite 424-50 | Tiarco Chemical | Octolite 424-50 is a dispersible aqueous antioxidant emulsion, composed of a synergistic blend of sterically hindered phenol and thioester. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant pro...展开 Octolite 424-50 is a dispersible aqueous antioxidant emulsion, composed of a synergistic blend of sterically hindered phenol and thioester. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in synthetic and natural latex polymers. This product is recommended for use in carboxylated SBR latex compounds and adhesives. 收起 | |
| Octolite 497 | Tiarco Chemical | Octolite 497 is an aqueous antioxidant dispersion composed of butylated hydroxytoluene. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in many polymers against the effects of heat...展开 Octolite 497 is an aqueous antioxidant dispersion composed of butylated hydroxytoluene. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in many polymers against the effects of heat, ultraviolet light, and oxidation. This dispersion is milled to a fine particle size for maximum activity. Octolite 497 is well suited for use in the production of food packaging adhesives and with repeated use rubber products. 收起 | |
| Octolite 544 CF | Tiarco Chemical | Octolite 544 CF is a casein free, 55% concentrated, anionic aqueous dispersion of DNPD antioxidant and metal deactivator (copper inhibitor). This highly active antioxidant is semi-staining and provides good heat and oxidation resistance to SBR, natural, a...展开 Octolite 544 CF is a casein free, 55% concentrated, anionic aqueous dispersion of DNPD antioxidant and metal deactivator (copper inhibitor). This highly active antioxidant is semi-staining and provides good heat and oxidation resistance to SBR, natural, and other latex systems. It is also particularly beneficial in protecting against degradation by trace metals such as copper and manganese. 收起 | |
| Octolite 640 | Tiarco Chemical | Octolite 640 is a dispersible aqueous antioxidant emulsion consisting of a synergistic blend of sterically hindered phenol and thioester. Non-staining and non-discoloring in performance, it provides highly efficient stabilization and antioxidant protectio...展开 Octolite 640 is a dispersible aqueous antioxidant emulsion consisting of a synergistic blend of sterically hindered phenol and thioester. Non-staining and non-discoloring in performance, it provides highly efficient stabilization and antioxidant protection in SBR, natural, and neoprene latex polymers. Octolite 640 is particularly useful for providing superior protection against high-temperature degradation in certain latex polymer compounds. 收起 | |
| Octolite 647 | Tiarco Chemical | Octolite 647 is a yellow to tan aqueous dispersion of polymeric quinoline derivative. This general-purpose semi-staining antioxidant is frequently used in latex compounding to impart high temperature resistance. It also improves ozone resistance of many p...展开 Octolite 647 is a yellow to tan aqueous dispersion of polymeric quinoline derivative. This general-purpose semi-staining antioxidant is frequently used in latex compounding to impart high temperature resistance. It also improves ozone resistance of many polymers. It is non-blooming and of high durability. This product is typically used as a rubber antioxidant stabilizer for natural, butadiene, chloroprene, and nitile latex. Octolite 647 is also used as a corrosion inhibitor and preservative (it retards oxidation, deterioration, and rancidity). 收起 | |
| Octolite 668 | Tiarco Chemical | Octolite 668 is an anionic aqueous emulsion composed of a highly active, multi-purpose, non-phenolic antioxidant mixture, for all types of latex rubber. It is only slightly staining and virtually non-discoloring. This emulsion is stable over a wide pH ran...展开 Octolite 668 is an anionic aqueous emulsion composed of a highly active, multi-purpose, non-phenolic antioxidant mixture, for all types of latex rubber. It is only slightly staining and virtually non-discoloring. This emulsion is stable over a wide pH range for direct addition to latex. It exhibits low volatility and excellent frothability. Octolite 668 is also highly effective in polychloroprene polymers, providing protection against degradation due to heat, light, and oxygen. 收起 | |
| Octolite 806 | Tiarco Chemical | Octolite 806 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (dilaurylthiodipropionate). It provides highly efficient stabilization and antioxidant protection. Octolite 806 is recommended for u...展开 Octolite 806 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (dilaurylthiodipropionate). It provides highly efficient stabilization and antioxidant protection. Octolite 806 is recommended for use in butadiene/styrene and synthetic latex compounds as well as SBR and natural rubber compounds. 收起 | |
| Octolite 809 | Tiarco Chemical | Octolite 809 is an aqueous anionic dispersion of 2,2'-Methylenebis (4-methyl-6-tert-butylphenol). This primary phenolic antioxidant is effective in preventing thermal oxidation of SBR and natural latex films, adhesives, and foams. This dispersion is ball-...展开 Octolite 809 is an aqueous anionic dispersion of 2,2'-Methylenebis (4-methyl-6-tert-butylphenol). This primary phenolic antioxidant is effective in preventing thermal oxidation of SBR and natural latex films, adhesives, and foams. This dispersion is ball-milled to a fine particle size for maximum activity. Octolite 809 is essentially non-staining but can cause some slight pink discoloration in certain applications. 收起 | |
| Octolite AO-50 | Tiarco Chemical | Octolite AO-50 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (ditridecylthiodipropionate). This economical, non-staining, non-discoloring antioxidant provides good stabilization and protectio...展开 Octolite AO-50 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (ditridecylthiodipropionate). This economical, non-staining, non-discoloring antioxidant provides good stabilization and protection to synthetic and natural latex polymers. Octolite AO-50 is ideally suited for use in carboxylated SBR latex compounds and adhesives. 收起 | |
| Octolite WL | Tiarco Chemical | Octolite WL is an aqueous anionic dispersion of sterically hindered phenol. It is non-staining and non-discoloring in performance and provides highly efficient stabilization and antioxidant protection in ABS, synthetic, and natural latex polymers against ...展开 Octolite WL is an aqueous anionic dispersion of sterically hindered phenol. It is non-staining and non-discoloring in performance and provides highly efficient stabilization and antioxidant protection in ABS, synthetic, and natural latex polymers against the effects of heat, ultraviolet light, and oxidation. Octolite WL is well suited for use in the production of food packaging adhesives and with repeated use rubber products. 收起 | |
| Octopol NB-47 | Tiarco Chemical | Octopol NB-47 is an ultra-fast accelerator composed of sodium dibutyldithiocarbamate. It is ideal for use in natural latex, SBR, and CR latex compounds, where it activates thiazoles in the latex cure system. This product is of particular interest in latex...展开 Octopol NB-47 is an ultra-fast accelerator composed of sodium dibutyldithiocarbamate. It is ideal for use in natural latex, SBR, and CR latex compounds, where it activates thiazoles in the latex cure system. This product is of particular interest in latex compounds where the zinc level from zinc dithiocarbamates can be reduced. 收起 | |
| Octosol 449 | Tiarco Chemical | Octosol 449 is a potassium oleate soap in the form of a yellow to amber liquid. It is prepared from fine oleic acid (red oil) reacted with a minimum excess of potassium hydroxide (KOH, potash). This fatty acid soap plays an important role in latex compoun...展开 Octosol 449 is a potassium oleate soap in the form of a yellow to amber liquid. It is prepared from fine oleic acid (red oil) reacted with a minimum excess of potassium hydroxide (KOH, potash). This fatty acid soap plays an important role in latex compounds by contributing to mechanical and chemical stability. Octosol 449 may be used as a primary frothing aid in gelled latex foam compounds. It may also used as a dispersant for fillers, dry chemicals, and pigments. 收起 | |
| Octosol 571 | Tiarco Chemical | Octosol 571 is a cationic surfactant consisting of lauryl trimethyl ammonium chloride in a solution of water and isopropyl alcohol. It is recommended as an emulsifier in cationic or blended ionic emulsion systems. Its use in latex compounds as a "sensitiz...展开 Octosol 571 is a cationic surfactant consisting of lauryl trimethyl ammonium chloride in a solution of water and isopropyl alcohol. It is recommended as an emulsifier in cationic or blended ionic emulsion systems. Its use in latex compounds as a "sensitizer" is due to the fact that quaternary ammonium surfactants are not compatible with the anionic latex stabilizers. Some latex foams must be gelled before curing in order to mold or emboss while wet, or to prevent loss of gauge due to cell collapse during the cure interval. 收起 | |
| Octosol 687 | Tiarco Chemical | Octosol 687 is a fatty acid soap prepared from ricinoleic acid reacted with a minimum excess of potassium hydroxide (KOH, potash). Potassium ricinoleate plays an important role in latex compounds by contributing to the mechanical and chemical stability. O...展开 Octosol 687 is a fatty acid soap prepared from ricinoleic acid reacted with a minimum excess of potassium hydroxide (KOH, potash). Potassium ricinoleate plays an important role in latex compounds by contributing to the mechanical and chemical stability. Octosol 687 is suggested for use as a primary frothing aid in gelled latex foam compounds. It is may also be used as a dispersant for fillers, dry chemicals, and pigments. 收起 | |
| Octosol 730 | Tiarco Chemical | Octosol 730 is a surfactant composed of ammonium cocoate in aqueous solution. It can be used as an emulsifier, dispersant, wetting agent, and foaming agent. This product exhibits the excellent frothing and foam stabilizing abilities necessary to produce q...展开 Octosol 730 is a surfactant composed of ammonium cocoate in aqueous solution. It can be used as an emulsifier, dispersant, wetting agent, and foaming agent. This product exhibits the excellent frothing and foam stabilizing abilities necessary to produce quality-frothed adhesives and latex foams. 收起 | |
| Octosol 731 | Tiarco Chemical | Octosol 731 is an anionic, light yellow liquid solution of sodium salt of a carboxylated polyelectrolyte. It serves as an excellent dispersing aid in wide variety of formulations - including carpet back-coatings, dyes, pigments, and clays, as well as with...展开 Octosol 731 is an anionic, light yellow liquid solution of sodium salt of a carboxylated polyelectrolyte. It serves as an excellent dispersing aid in wide variety of formulations - including carpet back-coatings, dyes, pigments, and clays, as well as with inorganic compounds. 收起 | |
| Octosol 828 | Tiarco Chemical | Octosol 828 is a 12-mole sodium lauryl ether sulfate used in emulsion polymerization. It is generally used with high molecular weight polymers, as well as in high acid systems as an emulsifier. This product minimizes the potential for coagulation and is f...展开 Octosol 828 is a 12-mole sodium lauryl ether sulfate used in emulsion polymerization. It is generally used with high molecular weight polymers, as well as in high acid systems as an emulsifier. This product minimizes the potential for coagulation and is formaldehyde free. 收起 | |
| Octosol 853 | Tiarco Chemical | Octosol 853 is an anionic surfactant, in the form of a dark reddish-brown aqueous solution of sulfated fatty acids. It aids in the mechanical and chemical stability of both natural and synthetic latices during compounding, storage, and application. This p...展开 Octosol 853 is an anionic surfactant, in the form of a dark reddish-brown aqueous solution of sulfated fatty acids. It aids in the mechanical and chemical stability of both natural and synthetic latices during compounding, storage, and application. This product is formulated to prevent premature coagulation of the latex under such conditions as high-speed agitation, acidification, or pigmentation. Octosol 853 may also be used for gelation-control. Used as a dipping aid, it ensures uniform film deposits and good penetration. 收起 | |
| Octosol A-18 | Tiarco Chemical | Octosol A-18 is an opalescent aqueous dispersion of disodium n-octadecylsulfosuccinamate, in the form of an off-white to cream-colored paste. Stable in acid and alkaline aqueous systems, this surfactant has many successful uses: emulsifying, dispersing, a...展开 Octosol A-18 is an opalescent aqueous dispersion of disodium n-octadecylsulfosuccinamate, in the form of an off-white to cream-colored paste. Stable in acid and alkaline aqueous systems, this surfactant has many successful uses: emulsifying, dispersing, and foaming. It is used as a textile-softening agent, as a suspending agent in emulsion polymerization, as a foaming agent in latex compounds, and in cleaning and penetrating formulations. 收起 | |
| Octosol A-18A | Tiarco Chemical | Octosol A-18A is a dispersion of diammonium-n-octadecylsulfosuccinamate in the form of a clear amber to creamy white liquid or paste, depending on storage temperature. It is considered an ideal foaming agent for use in acrylic latex frothed compounds. Bei...展开 Octosol A-18A is a dispersion of diammonium-n-octadecylsulfosuccinamate in the form of a clear amber to creamy white liquid or paste, depending on storage temperature. It is considered an ideal foaming agent for use in acrylic latex frothed compounds. Being an ammonium neutralized surfactant, Octosol A-18A allows for reduced sodium ion content in formulations where such fixed alkali ions are believed to retard the cross-linking cure systems. 收起 | |
| Octosol ALS | Tiarco Chemical | Octosol ALS is an aqueous solution of a ammonium lauryl sulfate, in the form of a pale clear liquid which readily mixes in water. It is an excellent stabilizer, emulsifier, and dispersant for many industrial aqueous systems. | |
| Octosol SLS | Tiarco Chemical | Octosol SLS is a clear aqueous solution of sodium lauryl sulfate, characterized by light color, low odor, a low cloud point, and low salt content. It is an excellent stabilizer and frothing aid which produces stable foams of latex compounds. It is also a ...展开 Octosol SLS is a clear aqueous solution of sodium lauryl sulfate, characterized by light color, low odor, a low cloud point, and low salt content. It is an excellent stabilizer and frothing aid which produces stable foams of latex compounds. It is also a good emulsifying and dispersing agent. Octosol SLS is recommended for use as a biodegradable wetting agent, detergent, and emulsion stabilizer. 收起 | |
| Octosol SLS-30K | Tiarco Chemical | Octosol SLS-30K is a clear, water white to pale yellow, aqueous solution of sodium lauryl sulfate preserved with Kathon CG™. It is an excellent stabilizer and frothing aid which produces stable foams of latex compounds. It is also a good emulsifying and d...展开 Octosol SLS-30K is a clear, water white to pale yellow, aqueous solution of sodium lauryl sulfate preserved with Kathon CG™. It is an excellent stabilizer and frothing aid which produces stable foams of latex compounds. It is also a good emulsifying and dispersing agent. Octosol SLS-30K is recommended for use as a biodegradable wetting agent, detergent, and emulsion stabilizer. 收起 | |
| Octosperse 425 | Tiarco Chemical | Octosperse 425 is a solution of finely ground sodium silicaflouride in water, used as a non-temperature dependent gelling agent in latex foam curing systems. It is non-staining and non-discoloring. Generally the material is diluted with water to a concent...展开 Octosperse 425 is a solution of finely ground sodium silicaflouride in water, used as a non-temperature dependent gelling agent in latex foam curing systems. It is non-staining and non-discoloring. Generally the material is diluted with water to a concentration suitable for use in a specific formulation. It is suggested that lab testing information be used for acceptable performance levels. 收起 | |
| Octosperse 428 | Tiarco Chemical | Octosperse 428 is a solution of finely ground sodium silicaflouride in water, used as a non-temperature dependent gelling agent in latex foam curing systems. It is non-staining and non-discoloring. Generally the material is diluted with water to a concent...展开 Octosperse 428 is a solution of finely ground sodium silicaflouride in water, used as a non-temperature dependent gelling agent in latex foam curing systems. It is non-staining and non-discoloring. Generally the material is diluted with water to a concentration suitable for use in a specific formulation. 收起 | |
| Octosperse TS-10 | Tiarco Chemical | Octosperse TS-10 is a polydimethylsiloxane and silica blend in the form of an aqueous nonionic emulsion. It is compatible to most wet processing uses. Use either full strength or cut with water before adding, whichever gives the best dispersion into the f...展开 Octosperse TS-10 is a polydimethylsiloxane and silica blend in the form of an aqueous nonionic emulsion. It is compatible to most wet processing uses. Use either full strength or cut with water before adding, whichever gives the best dispersion into the foaming system. The eventual concentration can be established which is the most economical and efficient for a given system. 收起 | |
| Octosperse TS-30 | Tiarco Chemical | Octosperse TS-30 is a polydimethylsiloxane and silica blend in the form of an aqueous nonionic emulsion. It is compatible to most wet processing uses. Use either full strength or cut with water before adding, whichever gives the best dispersion into the f...展开 Octosperse TS-30 is a polydimethylsiloxane and silica blend in the form of an aqueous nonionic emulsion. It is compatible to most wet processing uses. Use either full strength or cut with water before adding, whichever gives the best dispersion into the foaming system. For starting, it is suggested that in dye becks and wash operations that 1/2 ounce of the defoamer be used per 100 gallons of the process volume. The concentration can then be adjusted to establish the most economical and efficient concentration. 收起 | |
| Octotint 120 | Tiarco Chemical | Octotint 120 is an aqueous dispersion of ultramarine blue, an inorganic pigment having good alkali and heat resistance. This bright hue is opaque in water-based systems and not recommended for acidic systems. Octotint 120 blue is recommended for use in th...展开 Octotint 120 is an aqueous dispersion of ultramarine blue, an inorganic pigment having good alkali and heat resistance. This bright hue is opaque in water-based systems and not recommended for acidic systems. Octotint 120 blue is recommended for use in the rubber latex industry as a bluing agent, applied in very low percentages to intensify whiteness by offsetting yellowish undertones. 收起 | |
| Octotint 435 | Tiarco Chemical | Octotint 435 is an aqueous dispersion of highly refined chroma blue pigments of extremely fine particle size and purity. It can be used with good compatibility in aqueous formulations where its characteristic color is desired. Octotint 435 has pleasing an...展开 Octotint 435 is an aqueous dispersion of highly refined chroma blue pigments of extremely fine particle size and purity. It can be used with good compatibility in aqueous formulations where its characteristic color is desired. Octotint 435 has pleasing and useful color characteristics both in masstone and tint. Its pigment sources display high tinting strength and hiding power. Because it is water-based, dispersibility into a latex system is greatly enhanced while demonstrating excellent handling properties. 收起 | |
| Octotint 725 | Tiarco Chemical | Octotint 725 is a finely divided aqueous dispersion of rutile titanium dioxide pigment, at 60% activity. Titanium dioxide has the greatest hiding power, or opacifying power, of all pigments. It is also inert and noncombustible. Octotint 725 is formulated ...展开 Octotint 725 is a finely divided aqueous dispersion of rutile titanium dioxide pigment, at 60% activity. Titanium dioxide has the greatest hiding power, or opacifying power, of all pigments. It is also inert and noncombustible. Octotint 725 is formulated for direct addition into most latex-based compounds, thus providing the compounder with a ready-to-use, pourable form of TiO2 with improved dispersion properties. 收起 | |
| Octotint 790 | Tiarco Chemical | Octotint 790 is a water-based dispersion of highly refined brown pigments of extremely fine particle size and purity, with properties tailored for the specific applications of tinting jute adhesives. It can also be used with good compatibility in other aq...展开 Octotint 790 is a water-based dispersion of highly refined brown pigments of extremely fine particle size and purity, with properties tailored for the specific applications of tinting jute adhesives. It can also be used with good compatibility in other aqueous formulations where its characteristic color would be desired. 收起 | |
| Octowax 1500 | Tiarco Chemical | Octowax 1500 is an emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-staining a...展开 Octowax 1500 is an emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-staining antioxidants. The wax "blooms" during the cure process from the emulsion to the rubber surface, providing a barrier against ozone attack. Octowax 1500 is designed to be added directly to latex compounds. 收起 | |
| Octowax 17 | Tiarco Chemical | Octowax 17 is a homogenized emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-s...展开 Octowax 17 is a homogenized emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-staining antioxidants. The wax "blooms" during the cure process from the emulsion to the rubber surface, providing a barrier against ozone attack. Octowax 17 is designed to be added directly to latex compounds. 收起 | |
| Octowax 321 | Tiarco Chemical | Octowax 321 is a paraffin wax emulsion that is typically very stable to shear and heat-stable during drying. Suggested uses include physical modification of cured latex compounds, water resistance improvement, and improved aging characteristics brought ab...展开 Octowax 321 is a paraffin wax emulsion that is typically very stable to shear and heat-stable during drying. Suggested uses include physical modification of cured latex compounds, water resistance improvement, and improved aging characteristics brought about by the addition of this type of wax emulsion to latex. Octowax 321 is designed to be added directly to latex compounds. 收起 | |
| Octowax 5 | Tiarco Chemical | Octowax 5 is an emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-staining anti...展开 Octowax 5 is an emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-staining antioxidants. The wax "blooms" during the cure process from the emulsion to the rubber surface, providing a barrier against ozone attack. Octowax 5 is designed to be added directly to latex compounds. 收起 | |
| Octowax MR-40 | Tiarco Chemical | Octowax MR-40 is a light amber-cream colored emulsion of an oxidized, modified hydrocarbon wax. The emulsion is based primarily on a nonionic surfactant, but is a mixture with anionic because of the amine-neutralized reactive components of the wax. Octowa...展开 Octowax MR-40 is a light amber-cream colored emulsion of an oxidized, modified hydrocarbon wax. The emulsion is based primarily on a nonionic surfactant, but is a mixture with anionic because of the amine-neutralized reactive components of the wax. Octowax MR-40 is suggested for use as a mold-release and lubricant. 收起 | |
| Octowet 70 | Tiarco Chemical | Octowet 70 is an anionic surfactant (70% DOSS) in water and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a ...展开 Octowet 70 is an anionic surfactant (70% DOSS) in water and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起 | |
| Octowet 70D | Tiarco Chemical | Octowet 70D is an anionic surfactant solution (DOSS) in water, and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely use...展开 Octowet 70D is an anionic surfactant solution (DOSS) in water, and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起 | |
| Octowet 70MS | Tiarco Chemical | Octowet 70MS is an anionic surfactant, 70% DOSS in mineral spirits. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a ...展开 Octowet 70MS is an anionic surfactant, 70% DOSS in mineral spirits. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起 | |
| Octowet 70PG | Tiarco Chemical | Octowet 70PG is a 70% DOSS solution in water and propylene glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a ...展开 Octowet 70PG is a 70% DOSS solution in water and propylene glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. Additionally, Octowet 70PG is formulated so as to provide the surfactant in a non-flammable aqueous form. 收起 | |
| Octowet 70X | Tiarco Chemical | Octowet 70X is an anionic surfactant (70% DOSS) in water and ethanol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as ...展开 Octowet 70X is an anionic surfactant (70% DOSS) in water and ethanol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起 | |
| Octowet 75 | Tiarco Chemical | Octowet 75 is an anionic surfactant (75% DOSS) in water and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a ...展开 Octowet 75 is an anionic surfactant (75% DOSS) in water and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起 | |
| Octowet 75PG | Tiarco Chemical | Octowet 75PG is a 75% DOSS solution in water and propylene glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a p...展开 Octowet 75PG is a 75% DOSS solution in water and propylene glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起 | |
| Octowet 75X | Tiarco Chemical | Octowet 75X is an anionic surfactant (75% DOSS) in water and ethanol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as ...展开 Octowet 75X is an anionic surfactant (75% DOSS) in water and ethanol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起 | |
| Reservol Flake | Tiarco Chemical | Reservol Flake is a technically pure sodium m-nitrobenzene sulfonate (SMNBS) in the form of yellow to tan flakes. This product used in textile printing, colored bleach goods, reactive dyeing, and oxidation in baths and continuous equipment. | |
| Reservol Liquid | Tiarco Chemical | Reservol Liquid is a 21% active solution of sodium m-nitrobenzene sulfonate (SMNBS) in water, in the form of a clear yellow liquid. This product is used in used in textile printing, colored bleach goods, reactive dyeing, and oxidation in baths and continu...展开 Reservol Liquid is a 21% active solution of sodium m-nitrobenzene sulfonate (SMNBS) in water, in the form of a clear yellow liquid. This product is used in used in textile printing, colored bleach goods, reactive dyeing, and oxidation in baths and continuous equipment. 收起 | |
| Reservol Powder | Tiarco Chemical | Reservol Powder is a technically pure sodium m-nitrobenzene sulfonate (SMNBS) in the form of a yellow to tan powder. This product used in textile printing, colored bleach goods, reactive dyeing, and oxidation in baths and continuous equipment. | |
| T Gum 102 | Tiarco Chemical | T Gum 102 is an alkali swellable acrylic latex thickener that can be used for any alkaline pH coating. It is handled easily at low pH and develops good viscosity when the total pH is adjusted to the alkaline side. This product has good mechanical stabilit...展开 T Gum 102 is an alkali swellable acrylic latex thickener that can be used for any alkaline pH coating. It is handled easily at low pH and develops good viscosity when the total pH is adjusted to the alkaline side. This product has good mechanical stability and is consistent in the manufacturing process. 收起 | |
| T-Gum 103 | Tiarco Chemical | T-Gum 103 is a sodium polyacrylate thickener used in a wide variety of natural and synthetic latex applications. This product may be used to thicken styrene-butadiene, acrylonitrile, butadiene, acrylic, neoprene, vinyl acetate, and ethylene-vinyl acetate ...展开 T-Gum 103 is a sodium polyacrylate thickener used in a wide variety of natural and synthetic latex applications. This product may be used to thicken styrene-butadiene, acrylonitrile, butadiene, acrylic, neoprene, vinyl acetate, and ethylene-vinyl acetate latex compounds. 收起 | |
| T-Gum 104 | Tiarco Chemical | T-Gum 104 is a sodium polyacrylate thickener used in a wide variety of natural and synthetic latex applications - including carpet backing, latex foam, adhesives, emulsions, textile coatings, non-wovens, and dispersions. This product may be used to thicke...展开 T-Gum 104 is a sodium polyacrylate thickener used in a wide variety of natural and synthetic latex applications - including carpet backing, latex foam, adhesives, emulsions, textile coatings, non-wovens, and dispersions. This product may be used to thicken styrene-butadiene, acrylonitrile, butadiene, neoprene, acrylic, vinyl acetate, and ethylene-vinyl acetate latex compounds. 收起 | |
| T-Gum AHG | Tiarco Chemical | T-Gum AHG is a polyacrylate thickener used in a wide variety of natural and synthetic latex applications. It is especially well-suited to latices with an alkaline reaction. This product may be used to thicken styrene-butadiene, acrylonitrile, butadiene, a...展开 T-Gum AHG is a polyacrylate thickener used in a wide variety of natural and synthetic latex applications. It is especially well-suited to latices with an alkaline reaction. This product may be used to thicken styrene-butadiene, acrylonitrile, butadiene, acrylic, neoprene, vinyl acetate, and ethylene-vinyl acetate latex compounds. 收起 | |
| Venadol™ 104 | Harcros Chemicals, Inc. | Venadol™ 104 is a 100% active surface-active agent with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol...展开 Venadol™ 104 is a 100% active surface-active agent with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. 收起 | |
| Venadol™ 104 PG50 | Harcros Chemicals, Inc. | Venadol™ 104 PG50 is a 50% active surface-active agent in propylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various...展开 Venadol™ 104 PG50 is a 50% active surface-active agent in propylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104 PG50 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. 收起 | |
| Venadol™ 104BC | Harcros Chemicals, Inc. | Venadol™ 104BC is a 50% active surface-active agent in 2-Butoxyethanol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various prop...展开 Venadol™ 104BC is a 50% active surface-active agent in 2-Butoxyethanol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104BC to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. 收起 | |
| Venadol™ 104DPM | Harcros Chemicals, Inc. | Venadol™ 104DPM is a 50% active surface-active agent in Dipropylene glycol monomethyl ether with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilizati...展开 Venadol™ 104DPM is a 50% active surface-active agent in Dipropylene glycol monomethyl ether with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104DPM to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. 收起 | |
| Venadol™ 104E | Harcros Chemicals, Inc. | Venadol™ 104E is a 50% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various prop...展开 Venadol™ 104E is a 50% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104E to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. 收起 | |
| Venadol™ 104H | Harcros Chemicals, Inc. | Venadol™ 104H is a 75% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various prop...展开 Venadol™ 104H is a 75% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104H to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. 收起 | |
| Venadol™ 104PA | Harcros Chemicals, Inc. | Venadol™ 104PA is a 50% active surface-active agent in 2-propanol(IPA) with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various pro...展开 Venadol™ 104PA is a 50% active surface-active agent in 2-propanol(IPA) with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104PA to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. 收起 | |
| Venadol™ 20 | Harcros Chemicals, Inc. | Venadol™ 20 is an effective wetting agent and molecular deofamer that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubri...展开 Venadol™ 20 is an effective wetting agent and molecular deofamer that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free. 收起 | |
| Venadol™ 40 | Harcros Chemicals, Inc. | Venadol™ 40 is a non-foaming wetting agent with a unique structure that allows multi-functional properties which include the following: foam control, increased wetting and reduction in surface tension. These various properties allow Venadol™ 40 to be util...展开 Venadol™ 40 is a non-foaming wetting agent with a unique structure that allows multi-functional properties which include the following: foam control, increased wetting and reduction in surface tension. These various properties allow Venadol™ 40 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free. 收起 | |
| Venadol™ 65 | Harcros Chemicals, Inc. | Venadol™ 65 is a low foaming wetting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is...展开 Venadol™ 65 is a low foaming wetting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free. 收起 | |
| Venadol™ 85 | Harcros Chemicals, Inc. | Venadol™ 85 is an effective wetting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is ...展开 Venadol™ 85 is an effective wetting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free. 收起 | |
| Venadol™ DF 110 L | Harcros Chemicals, Inc. | Venadol™ DF 110 L is a high performance, nonionic, molecular defoamer and deaerator. Venadol DF 110 L excels where effective defoaming or de-airentraining and foam elimination/prevention is necessary without causing surface defects. |
