D.M.P. 30 | Synpol Products PVT. Ltd | D.M.P. 30 is a tertiary amine. This product has a viscosity of 2-5 cPs and a density of 0.9-1.0 g/cm3. D.M.P. 30 is most commonly used as a hardener in lamination and adhesive applications. | |
Drobond™ 551 | D.R. Coats Ink & Resins Pvt. Ltd. | Drobond™ 551 is a Reddish yellow mobile liquid readily decomposed by water to form polymeric titanium compounds. It is supplied as a solution in isopropyl alcohol. | |
Drocure™ 5130 | D.R. Coats Ink & Resins Pvt. Ltd. | Drocure™ 5130 is a versatile Lewis based catalyst for curing of Epoxy Resins. It is a technical grade of tris-(dimethylaminomethyl) phenol. | |
Drodil™ 1210 | D.R. Coats Ink & Resins Pvt. Ltd. | Drodil™ 1210 (A.G.E) is a mono-glycidyl ether of C12-C14 fatty alcohol. | |
Drodur™ L 75 | D.R. Coats Ink & Resins Pvt. Ltd. | Drodur™ L 75 is a liquid aromatic polyisocyanate based on toluene di-isocyanate. | |
Droester™ 2751 | D.R. Coats Ink & Resins Pvt. Ltd. | Droester™ 2751 is a Penta Erythritol Esterified Rosin. | |
Droester™ 2752 | D.R. Coats Ink & Resins Pvt. Ltd. | Droester™ 2752 is a Glycerine Esterified Rosin. | |
Drokryl™ 1000 | D.R. Coats Ink & Resins Pvt. Ltd. | Drokryl™ 1000 is Thermoplastic Acrylic Resins with Excellent Flexibility and Yellowing Resistance. | |
Drokryl™ 1001 | D.R. Coats Ink & Resins Pvt. Ltd. | Drokryl™ 1001 is Thermoplastic Acrylic Resins with Excellent Flexibility and Yellowing Resistance. | |
Drokryl™ 7851 | D.R. Coats Ink & Resins Pvt. Ltd. | Drokryl™ 7851 is a hydroxyl functional Acrylic Resin formulated for cross linking with polyisocynates at ambient temperature. | |
Drokryl™ 7862 | D.R. Coats Ink & Resins Pvt. Ltd. | Drokryl™ 7862 is a hydroxyl functional Acrylic Polyol Resin formulated for cross linking with polyisocyanate at ambient temperature. | |
Drokyd™ 6010 | D.R. Coats Ink & Resins Pvt. Ltd. | Drokyd™ 6010 is short oil alkyd having 28% oil length. | |
Drokyd™ 6020 | D.R. Coats Ink & Resins Pvt. Ltd. | Drokyd™ 6020 is short oil alkyd having 42% oil length. | |
Drokyd™ 6030 | D.R. Coats Ink & Resins Pvt. Ltd. | Drokyd™ 6030 is long oil soya alkyd resin having 60% MTO tolerance. | |
Drolite™ 9040 | D.R. Coats Ink & Resins Pvt. Ltd. | Drolite™ 9040 is a Phenalkamine used as curing agent for various Epoxy Resins. Specially for Marine coatings and other Industrial applications. | |
Drolite™ 9041 | D.R. Coats Ink & Resins Pvt. Ltd. | Drolite™ 9041 is a Phenalkamine used as curing agent for various Epoxy Resins. Specially for Marine coatings and other Industrial applications. | |
Dromal™ 2351 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromal™ 2351 is Rosin modified Maleic Resin. | |
Dromal™ 2354 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromal™ 2354 is Rosin modified Maleic Resin. | |
Dromel™ 103 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromel™ 103 is a Butylated Melamine Formaldehyde Resin. | |
Dromel™ 104 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromel™104 is a Butylated Urea Formaldehyde Resin. | |
Dromide® 930 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromide® 930 is a Co-solvent Soluble Non-Reactive Polyamide Resin suitable for flexographic and gravure printing inks and over printing lacquers, this resin provides good glossy sharp prints. | |
Dromide® 9315 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromide® 9315 is a High Viscosity Reactive Polyamide Curing agent for Epoxy Resin to be used in various applications. | |
Dromide® 9315X | D.R. Coats Ink & Resins Pvt. Ltd. | Dromide® 9315X is a Low Viscosity Reactive Polyamide Curing agent for epoxy resin supplied in 70% solution in Xylene. | |
Dromide® 9325 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromide® 9325 is a Medium Viscosity Reactive Polyamide Curing Agent for epoxy resin to be used in various applications. | |
Dromide® 9340 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromide® 9340 is a Medium to Low Viscosity Reactive Polyamide Curing Agent for epoxy resin to be used in various applications. | |
Dromide® 950 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromide® 950 is a Alcohol Soluble Non-Reactive Polyamide Resin with low temperature resistance used for flexographic and gravure liquid printing inks. | |
Dropack™ 5244 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropack™ 5244 is Thermoplastic Non-Reactive High Molecular Weight Aliphatic Polyurethane. | |
Droplas™ 4010 | D.R. Coats Ink & Resins Pvt. Ltd. | Droplas™ 4010 is a Oil free saturated polyester resins 65% in solvent C-nine/butyl glycol (70 SNABG). | |
Dropol™ 2201 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2201 is a Rosin Modified Phenolic Resin. | |
Dropol™ 2203 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2203 is a Rosin Modified Phenolic Resin. | |
Dropol™ 2205 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2205 is a Rosin Modified Phenolic Resin. | |
Dropol™ 2252 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2252 is a Pure Phenolic Novolac Resin. | |
Dropol™ 2271 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2271 is an Alkyl Phenolic Resin. | |
Dropol™ 2274 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2274 is an Alkyl Phenolic Resin. | |
Dropoxy™ 7250 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropoxy™ 7250 is a Medium Viscosity Unmodified Bisphenol A based Liquid Epoxy Resin. | |
Dropoxy™ 7257 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropoxy™ 7257 is a low viscous epoxy resin based on Bisphenol A modified with aromatic glycidyl ether. | |
Dropoxy™ 7450X | D.R. Coats Ink & Resins Pvt. Ltd. | Dropoxy™ 7450X is a Liquid Epoxy Resin supplied in 75% solution in Xylene. | |
DYHARD® 100 | AlzChem AG | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...展开 DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
DYHARD® 100S | AlzChem AG | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...展开 DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
DYHARD® 100SF | AlzChem AG | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
DYHARD® 100SH | AlzChem AG | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
DYHARD® A5M30 | AlzChem AG | DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions | |
DYHARD® CAAB | AlzChem AG | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...展开 DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. 收起 | |
DYHARD® D50EP | AlzChem AG | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...展开 DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. 收起 | |
DYHARD® DF50EP | AlzChem AG | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
DYHARD® Fluid 111 | AlzChem AG | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
DYHARD® Fluid 151 | AlzChem AG | DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
DYHARD® Fluid 212 | AlzChem AG | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
DYHARD® Fluid AC11 | AlzChem AG | DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
DYHARD® MCA10 | AlzChem AG | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
DYHARD® MCA30 | AlzChem AG | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
DYHARD® MI-C | AlzChem AG | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
DYHARD® MI-FF | AlzChem AG | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
DYHARD® MIA5 | AlzChem AG | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...展开 DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. 收起 | |
DYHARD® OTB | AlzChem AG | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
DYHARD® PI | AlzChem AG | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
DYHARD® PI-FF | AlzChem AG | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
DYHARD® PIN | AlzChem AG | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
DYHARD® PMC | AlzChem AG | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
DYHARD® RF1000 | AlzChem AG | DYHARD® RF1000 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
DYHARD® RF2100 | AlzChem AG | DYHARD® RF2100 is a low viscos modified bisphenol A epoxy resin. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
DYHARD® UR200 | AlzChem AG | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
DYHARD® UR300 | AlzChem AG | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
DYHARD® UR300AB | AlzChem AG | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
DYHARD® UR400 | AlzChem AG | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...展开 DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
DYHARD® UR500 | AlzChem AG | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
DYHARD® UR700 | AlzChem AG | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...展开 DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. 收起 | |
DYHARD® UR800 | AlzChem AG | DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
DYHARD® URAcc13 | AlzChem AG | DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
DYHARD® URAcc57 | AlzChem AG | DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
Epoxy Phenol B.G.E. | Synpol Products PVT. Ltd | Epoxy Phenol B.G.E. is a reactive diluent. This product has a density of 0.92-0.94 g/cm3. Epoxy Phenol B.G.E. is most commonly used in casting, encapsulation, and bonding applications. | |
Epoxy Phenol CNSL | Synpol Products PVT. Ltd | Epoxy Phenol CNSL is a reactive diluent. This product has a density of 0.96-0.97 g/cm3. Epoxy Phenol CNSL is most commonly used in casting, encapsulation, and bonding applications. | |
Epoxy Phenol P.G.E. | Synpol Products PVT. Ltd | Epoxy Phenol P.G.E. is a reactive diluent. This product has a density of 1.11-1.22 g/cm3. Epoxy Phenol P.G.E. is most commonly used in casting, encapsulation, and bonding applications. | |
Hardeners 111 | Synpol Products PVT. Ltd | Hardeners 111 is an aliphatic polyamine. This product has a viscosity of 15-25 cPs and a density of 0.98-0.99 g/cm3. Hardeners 111 is most commonly used in adhesive and coal tar modified surface coating applications. | |
Hardeners 222 | Synpol Products PVT. Ltd | Hardeners 222 is an aliphatic polyamine. This product has a viscosity of 7-10 cPs and a density of 0.95-0.96 g/cm3. Hardeners 222 is most commonly used in adhesive and coal tar modified surface coating applications. | |
Hardeners 260 | Synpol Products PVT. Ltd | Hardeners 260 is a modified aliphatic polyamine. This product has a viscosity of 75-80 cPs and a density of 1.0-1.1 g/cm3. Hardeners 260 is most commonly used in solvent-free epoxy coating and lamination applications. | |
Hardeners 280 | Synpol Products PVT. Ltd | Hardeners 280 is a modified aliphatic polyamine. This product has a viscosity of 20-30 cPs and a density of 1.14-1.16 g/cm3. Hardeners 280 is most commonly used as a hardener in coating applications. | |
Hardeners 340 | Synpol Products PVT. Ltd | Hardeners 340 is a modified aromatic polyamine. This product has a viscosity of 150-210 cPs and a density of 1.13-1.14 g/cm3. Hardeners 340 is most commonly used as a hardener in concrete and underwater coating applications. | |
Hardeners 345 | Synpol Products PVT. Ltd | Hardeners 345 is a modified aliphatic polyamine. This product has a viscosity of 6-9 cPs and a density of 1.10-1.12 g/cm3. Hardeners 345 is most commonly used as a hardener in concrete and underwater coating applications. | |
Hardeners 350 | Synpol Products PVT. Ltd | Hardeners 350 is a modified aliphatic polyamine. This product has a viscosity of 150-210 cPs and a density of 1.13-1.14 g/cm3. Hardeners 350 is most commonly used as a hardener in concrete and underwater coating applications. | |
Hardeners 444 | Synpol Products PVT. Ltd | Hardeners 444 is an aliphatic amine epoxy adduct. This product has a viscosity of 2-4 cPs and a density of 0.95-0.96 g/cm3. Hardeners 444 is most commonly used in chemical and solvent-resistant coating applications. | |
Hardeners 473 | Synpol Products PVT. Ltd | Hardeners 473 is a polyamine epoxy adduct. This product has a viscosity of 30-60 cPs and a density of 1.07-1.09 g/cm3. Hardeners 473 is most commonly used as a hardener in solvent-free epoxy coating applications. | |
Hardeners 473 | Synpol Products PVT. Ltd | Hardeners 473 is an aliphatic amine adduct. This product has a viscosity of 100-140 cPs and a density of 1.10-1.12 g/cm3. Hardeners 473 is most commonly used in fast-setting adhesive applications. | |
Hardeners 620 | Synpol Products PVT. Ltd | Hardeners 620 is a cycloaliphatic amine epoxy adduct. This product has a viscosity of 3-5 cPs and a density of 1.02-1.03 g/cm3. Hardeners 620 is most commonly used in flooring adhesive applications. | |
Hardeners 640 | Synpol Products PVT. Ltd | Hardeners 640 is a phenyl alkamine. This product has a viscosity of 20-40 cPs and a density of 0.98-1.0 g/cm3. Hardeners 640 is most commonly used in solvent-free and high-solids epoxy coating applications. | |
Ketonic™ 9100 | D.R. Coats Ink & Resins Pvt. Ltd. | Ketonic™ 9100 is a Hard Ketone Aldehyde Resin, compatible with most binders and soluble in nearly all conventional solvents field of application. | |
SILZOT® FS-X1 | AlzChem AG | SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride po...展开 SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride powders show a very stable and uniform high quality and are manufactured with best environmental practice. 收起 | |
Silzot® HQ plus (Powder) | AlzChem AG | Silzot® HQ plus (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
Silzot® HQ (Powder) | AlzChem AG | Silzot® HQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
SILZOT® RTP | AlzChem AG | SILZOT® RTP is a spray dried granulated silicon nitride powder containing processing and sintering additives. | |
Silzot® SQ | AlzChem AG | Silzot® SQ is a fine powder derived from the direct chemical reaction of highly purified silicon and nitrogen. | |
Silzot® TQ (Powder) | AlzChem AG | Silzot® TQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
Synpol 1001 | Synpol Products PVT. Ltd | Synpol 1001 is a butylated UF amino resin. This product has a non-volatile compound content of 63-67% and a density at 25°C of 1.03-1.05 g/cm3. Synpol 1001 is most commonly used in general purpose baking enamel applications. | |
Synpol 105X | Synpol Products PVT. Ltd | Synpol 105X is a reactive polyamide resin. This product has a density at 25°C of 0.96-0.98 g/cm3 and a non-volatile compound content of 58-62%. Synpol 105X is most commonly used as a hardener in solvent-based epoxy coating applications. | |
Synpol 115 | Synpol Products PVT. Ltd | Synpol 115 is a reactive polyamide resin. This product has a density at 25°C of 0.97-0.98 g/cm3. Synpol 115 is most commonly used as a hardener in protective and decorative coating applications. | |
Synpol 115 (70% in Xylene) | Synpol Products PVT. Ltd | Synpol 115 (70% in Xylene) is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.95 g/cm3 and a non-volatile compound content of 68-72%. Synpol 115 (70% in Xylene) is most commonly used as a hardener in protective and decorative coa...展开 Synpol 115 (70% in Xylene) is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.95 g/cm3 and a non-volatile compound content of 68-72%. Synpol 115 (70% in Xylene) is most commonly used as a hardener in protective and decorative coating applications. 收起 | |
Synpol 130 | Synpol Products PVT. Ltd | Synpol 130 is a reactive polyamide resin. This product has a density at 25°C of 1.03-1.04 g/cm3 and a non-volatile compound content of 68-72%. Synpol 130 is most commonly used as a hardener in water-emulsifiable epoxy coating applications. | |
Synpol 140 | Synpol Products PVT. Ltd | Synpol 140 is a reactive polyamide resin. This product has a density at 25°C of 0.96-0.98 g/cm3. Synpol 140 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
Synpol 150 | Synpol Products PVT. Ltd | Synpol 150 is a reactive polyamide resin. This product has a density at 25°C of 0.975-0.985 g/cm3. Synpol 150 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
Synpol 160 | Synpol Products PVT. Ltd | Synpol 160 is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.96 g/cm3. Synpol 160 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. |