| ACCULIN® 1000 (2071A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1000 is a hard, high melting point polyethylene. | |
| ACCULIN® 1500 (2057A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1500 is an extremely pure, inert, narrow melt point product that exhibits very specific expansion behavior. | |
| ACCULIN® 1500 (2073A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1500 is a hard, low melting point polyethylene. | |
| ACCULIN® 2000 (2074A) | The International Group, Inc. (IGI Wax) | ACCULIN® 2000 is a hard, high melting point polyethylene. | |
| ACCULIN® 500 (2056A) | The International Group, Inc. (IGI Wax) | ACCULIN® 500 is a hard, low melting point polyethylene. | |
| ACCULIN® 600 (2059A) | The International Group, Inc. (IGI Wax) | ACCULIN® 600 is a hard, low melting point polyethylene. | |
| ACCULIN® 655 (2061A) | The International Group, Inc. (IGI Wax) | ACCULIN® 655 is a hard, low melting point polyethylene. | |
| ACCULIN® 725 (2063A) | The International Group, Inc. (IGI Wax) | ACCULIN® 725 is a hard, low melting point polyethylene. | |
| Aquaban® 9001A | The International Group, Inc. (IGI Wax) | Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution ...展开 Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. 收起 | |
| Aquaban® 9009A | The International Group, Inc. (IGI Wax) | Aquaban® 9009A is a water-based treatment for paper and corrugated board. It imparts a high level of water repellence. | |
| Aquaban® 9010A | The International Group, Inc. (IGI Wax) | Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection ...展开 Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. For general purpose application other than corrugated, the product can be used without dilution. 收起 | |
| ASTORLITE® J50 (4636A) | The International Group, Inc. (IGI Wax) | ASTORLITE® J50 is a soft, white, opaque wax specially designed for jar / container candles. Its cohesive strength and low shrinkage allow it to adhere to the container. Jar / container candles can be made with a single filling with no top-off necessary. | |
| Bake-Guard 9156A | The International Group, Inc. (IGI Wax) | Bake-Guard 9156A is a high performance water-based coating for corrugated board and paper substrates where exceptional grease and water resistance are required. Other unique features of this product are its high angle of slide and ease of printability. | |
| Barrier-Grip 9471A | The International Group, Inc. (IGI Wax) | Barrier-Grip 9471A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip 9471B | The International Group, Inc. (IGI Wax) | Barrier-Grip 9471B is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip 9472B | The International Group, Inc. (IGI Wax) | Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the...展开 Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the performance of the functional coatings. 收起 | |
| Barrier-Grip R5701H | The International Group, Inc. (IGI Wax) | Barrier-Grip R5701H is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip R6709A | The International Group, Inc. (IGI Wax) | Barrier-Grip R6709A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Seal R6728A | The International Group, Inc. (IGI Wax) | Barrier-Seal R6728A is a water-based coating designed for SBS cup stock and other paper based substrates. It can be used for any packaging application that requires excellent water resistance, oil resistance and heat seal. | |
| Drobond™ 551 | D.R. Coats Ink & Resins Pvt. Ltd. | Drobond™ 551 is a Reddish yellow mobile liquid readily decomposed by water to form polymeric titanium compounds. It is supplied as a solution in isopropyl alcohol. | |
| Drocure™ 5130 | D.R. Coats Ink & Resins Pvt. Ltd. | Drocure™ 5130 is a versatile Lewis based catalyst for curing of Epoxy Resins. It is a technical grade of tris-(dimethylaminomethyl) phenol. | |
| Drodil™ 1210 | D.R. Coats Ink & Resins Pvt. Ltd. | Drodil™ 1210 (A.G.E) is a mono-glycidyl ether of C12-C14 fatty alcohol. | |
| Drodur™ L 75 | D.R. Coats Ink & Resins Pvt. Ltd. | Drodur™ L 75 is a liquid aromatic polyisocyanate based on toluene di-isocyanate. | |
| Droester™ 2751 | D.R. Coats Ink & Resins Pvt. Ltd. | Droester™ 2751 is a Penta Erythritol Esterified Rosin. | |
| Droester™ 2752 | D.R. Coats Ink & Resins Pvt. Ltd. | Droester™ 2752 is a Glycerine Esterified Rosin. | |
| Drokryl™ 1000 | D.R. Coats Ink & Resins Pvt. Ltd. | Drokryl™ 1000 is Thermoplastic Acrylic Resins with Excellent Flexibility and Yellowing Resistance. | |
| Drokryl™ 1001 | D.R. Coats Ink & Resins Pvt. Ltd. | Drokryl™ 1001 is Thermoplastic Acrylic Resins with Excellent Flexibility and Yellowing Resistance. | |
| Drokryl™ 7851 | D.R. Coats Ink & Resins Pvt. Ltd. | Drokryl™ 7851 is a hydroxyl functional Acrylic Resin formulated for cross linking with polyisocynates at ambient temperature. | |
| Drokryl™ 7862 | D.R. Coats Ink & Resins Pvt. Ltd. | Drokryl™ 7862 is a hydroxyl functional Acrylic Polyol Resin formulated for cross linking with polyisocyanate at ambient temperature. | |
| Drokyd™ 6010 | D.R. Coats Ink & Resins Pvt. Ltd. | Drokyd™ 6010 is short oil alkyd having 28% oil length. | |
| Drokyd™ 6020 | D.R. Coats Ink & Resins Pvt. Ltd. | Drokyd™ 6020 is short oil alkyd having 42% oil length. | |
| Drokyd™ 6030 | D.R. Coats Ink & Resins Pvt. Ltd. | Drokyd™ 6030 is long oil soya alkyd resin having 60% MTO tolerance. | |
| Drolite™ 9040 | D.R. Coats Ink & Resins Pvt. Ltd. | Drolite™ 9040 is a Phenalkamine used as curing agent for various Epoxy Resins. Specially for Marine coatings and other Industrial applications. | |
| Drolite™ 9041 | D.R. Coats Ink & Resins Pvt. Ltd. | Drolite™ 9041 is a Phenalkamine used as curing agent for various Epoxy Resins. Specially for Marine coatings and other Industrial applications. | |
| Dromal™ 2351 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromal™ 2351 is Rosin modified Maleic Resin. | |
| Dromal™ 2354 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromal™ 2354 is Rosin modified Maleic Resin. | |
| Dromel™ 103 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromel™ 103 is a Butylated Melamine Formaldehyde Resin. | |
| Dromel™ 104 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromel™104 is a Butylated Urea Formaldehyde Resin. | |
| Dromide® 930 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromide® 930 is a Co-solvent Soluble Non-Reactive Polyamide Resin suitable for flexographic and gravure printing inks and over printing lacquers, this resin provides good glossy sharp prints. | |
| Dromide® 9315 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromide® 9315 is a High Viscosity Reactive Polyamide Curing agent for Epoxy Resin to be used in various applications. | |
| Dromide® 9315X | D.R. Coats Ink & Resins Pvt. Ltd. | Dromide® 9315X is a Low Viscosity Reactive Polyamide Curing agent for epoxy resin supplied in 70% solution in Xylene. | |
| Dromide® 9325 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromide® 9325 is a Medium Viscosity Reactive Polyamide Curing Agent for epoxy resin to be used in various applications. | |
| Dromide® 9340 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromide® 9340 is a Medium to Low Viscosity Reactive Polyamide Curing Agent for epoxy resin to be used in various applications. | |
| Dromide® 950 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromide® 950 is a Alcohol Soluble Non-Reactive Polyamide Resin with low temperature resistance used for flexographic and gravure liquid printing inks. | |
| Dropack™ 5244 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropack™ 5244 is Thermoplastic Non-Reactive High Molecular Weight Aliphatic Polyurethane. | |
| Droplas™ 4010 | D.R. Coats Ink & Resins Pvt. Ltd. | Droplas™ 4010 is a Oil free saturated polyester resins 65% in solvent C-nine/butyl glycol (70 SNABG). | |
| Dropol™ 2201 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2201 is a Rosin Modified Phenolic Resin. | |
| Dropol™ 2203 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2203 is a Rosin Modified Phenolic Resin. | |
| Dropol™ 2205 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2205 is a Rosin Modified Phenolic Resin. | |
| Dropol™ 2252 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2252 is a Pure Phenolic Novolac Resin. | |
| Dropol™ 2271 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2271 is an Alkyl Phenolic Resin. | |
| Dropol™ 2274 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2274 is an Alkyl Phenolic Resin. | |
| Dropoxy™ 7250 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropoxy™ 7250 is a Medium Viscosity Unmodified Bisphenol A based Liquid Epoxy Resin. | |
| Dropoxy™ 7257 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropoxy™ 7257 is a low viscous epoxy resin based on Bisphenol A modified with aromatic glycidyl ether. | |
| Dropoxy™ 7450X | D.R. Coats Ink & Resins Pvt. Ltd. | Dropoxy™ 7450X is a Liquid Epoxy Resin supplied in 75% solution in Xylene. | |
| EVACOTE® 7089A | The International Group, Inc. (IGI Wax) | EVACOTE® 7089A is a specialty formulation of petroleum waxes and polymers suitable in consistency to be utilized as a sealant and coating for fertilizer applications. | |
| EVACOTE® 7292C | The International Group, Inc. (IGI Wax) | EVACOTE® 7292C is a premium multi-component formulation having good barrier properties against both water and moisture vapor. Its low viscosity might assist in achieving better machinability for application. | |
| IGI® 0431G | The International Group, Inc. (IGI Wax) | IGI® 0431G is a crude paraffin slack wax with relatively high oil content and melting point. | |
| IGI® 1230A | The International Group, Inc. (IGI Wax) | IGI® 1230A is a fully refined paraffin wax. | |
| IGI® 1239A | The International Group, Inc. (IGI Wax) | IGI® 1239A is a fully refined wax with a mid-range melting point. | |
| IGI® 1250A | The International Group, Inc. (IGI Wax) | IGI® 1250A is a fully refined paraffin wax. | |
| IGI® 1260A | The International Group, Inc. (IGI Wax) | IGI® 1260A is a fully refined paraffin wax. | |
| IGI® 1297A | The International Group, Inc. (IGI Wax) | IGI® 1297A is a fully refined paraffin wax with excellent heat stability. | |
| IGI® 1303A | The International Group, Inc. (IGI Wax) | IGI® 1303A is a fully refined high-melt paraffin wax that is used in a variety of applications including: hot-melt adhesives, investment casting, rubber products and textiles. | |
| IGI® 2202A | The International Group, Inc. (IGI Wax) | IGI® 2202A is a semi-refined, low-melt, scale wax that is used in a variety of applications including; candles and chlorination. | |
| IGI® 2251A | The International Group, Inc. (IGI Wax) | IGI® 2251A is a flexible physiotherapy wax. IGI® 2251A is a low melting wax that is totally transparent (clear) at 125°F (52°C). | |
| IGI® 2281A | The International Group, Inc. (IGI Wax) | IGI® 2281A is a specially selected grade of white crude scale wax possessing good flexibility as well as high gloss on air cooling. IGI® 2281A is ideal for use in container candles or as a coating wax for vegetables. The storage life of vegetables such as...展开 IGI® 2281A is a specially selected grade of white crude scale wax possessing good flexibility as well as high gloss on air cooling. IGI® 2281A is ideal for use in container candles or as a coating wax for vegetables. The storage life of vegetables such as turnips is improved by prevention of loss of moisture, while appearance is enhanced for improved marketability. Because it maintains flexibility at refrigerated temperatures, chipping and cracking of the coating is minimized when compared to other waxes. 收起 | |
| IGI® 2288A | The International Group, Inc. (IGI Wax) | IGI® 2288A is a refined scale wax designed for heat therapy of arthritic and related ailments. It has a low melting point to avoid discomfort on application, and solidifies to form a soft, flexible coating which is easily peeled from the skin. As IGI® 228...展开 IGI® 2288A is a refined scale wax designed for heat therapy of arthritic and related ailments. It has a low melting point to avoid discomfort on application, and solidifies to form a soft, flexible coating which is easily peeled from the skin. As IGI® 2288A solidifies, it continues to release heat to the treated area. 收起 | |
| IGI® 2289A | The International Group, Inc. (IGI Wax) | IGI® 2289A is a crude scale paraffin wax derived from petroleum. | |
| IGI® 6006A | The International Group, Inc. (IGI Wax) | IGI® 6006A is a specialty wax formulation for “one pour” container candles. | |
| IGI® 6027A | The International Group, Inc. (IGI Wax) | IGI® 6027A is a specialty formulation for container candles. | |
| IGI® 6028A | The International Group, Inc. (IGI Wax) | IGI® 6028A is a specialty formulation of vegetable derived waxes and petroleum derived waxes suitable in consistency to be used for the manufacture of pillar, votive and other molded candles. | |
| IGI® 6046A | The International Group, Inc. (IGI Wax) | IGI® 6046A is a specialty formulation for use in container candles. | |
| Ketonic™ 9100 | D.R. Coats Ink & Resins Pvt. Ltd. | Ketonic™ 9100 is a Hard Ketone Aldehyde Resin, compatible with most binders and soluble in nearly all conventional solvents field of application. | |
| MICROSERE® 5788A | The International Group, Inc. (IGI Wax) | MICROSERE® 5788A is a unique, low-melt microcrystalline wax that is used in a variety of applications including paper packaging and candles. | |
| MICROSERE® 5806A | The International Group, Inc. (IGI Wax) | MICROSERE® 5806A is a high-melt, amber colored microcrystalline that is used in a variety of applications. | |
| MICROSERE® 5871A | The International Group, Inc. (IGI Wax) | MICROSERE® 5871A is a light colored, high-melt, microcrystalline wax that is used in a variety of applications. | |
| MICROSERE® 5890A | The International Group, Inc. (IGI Wax) | MICROSERE® 5890A is a white, high-melt, microcrystalline wax that is used in a variety of applications. MICROSERE® 5890A complies with the requirements for “Microcrystalline Wax” set by the United States Pharmacopeia (USP) / National Formulary (NF). | |
| MICROSERE® 5896A | The International Group, Inc. (IGI Wax) | MICROSERE® 5896A is a coating-grade, high melt, microcrystalline wax used in a variety of applications including; adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5897A | The International Group, Inc. (IGI Wax) | MICROSERE® 5897A is a light colored, coating-grade, high melt, microcrystalline wax used in a variety of applications including; adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5909A | The International Group, Inc. (IGI Wax) | MICROSERE® 5909A is a high-melt, microcrystalline wax that is used in a variety of applications including; plastics, adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5910A | The International Group, Inc. (IGI Wax) | MICROSERE® 5910A is a high-melt, microcrystalline wax that is used in a variety of applications including; plastics, adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5999A | The International Group, Inc. (IGI Wax) | MICROSERE® 5999A is an amber colored microcrystalline wax with hard consistency and a high melting point. | |
| Norub 9202B Green | The International Group, Inc. (IGI Wax) | Norub 9202B Green is a water-based emulsion developed for application to liners of corrugated board to reduce its abrasive characteristics. The coating is most effective when applied at a rate of 10 - 15 g/m2 or 2 - 3 lbs per MSF in a continuous film. Thi...展开 Norub 9202B Green is a water-based emulsion developed for application to liners of corrugated board to reduce its abrasive characteristics. The coating is most effective when applied at a rate of 10 - 15 g/m2 or 2 - 3 lbs per MSF in a continuous film. This product is an ideal non-scuff coating which can be used for packaging office furniture, filing cabinets, household goods, and most speciality metal products - wherever non-abrasiveness is required. 收起 | |
| PARAFFLEX® 4625A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4625A is a specialty formulation of petroleum waxes suitable for the manufacture of scented pillar, votive and other molded candles. | |
| PARAFFLEX® 4630A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4630A is a soft, smooth and creamy looking blend specially formulated for single pour container candles. | |
| PARAFFLEX® 4797A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4797A is a premium grade cascading wax for treatment of corrugated paperboard. | |
| PETAX® 0310A | The International Group, Inc. (IGI Wax) | PETAX® 0310A is a cream white, odorless petrolatum of medium consistency (hardness) and fiber length. PETAX® 0310A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETAX® 0320A | The International Group, Inc. (IGI Wax) | PETAX® 0320A is a cream white, odorless petrolatum with a soft consistency and medium fiber length. PETAX® 0320A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETAX® 0386A | The International Group, Inc. (IGI Wax) | PETAX® 0386A is a white, odorless petrolatum of medium consistency (hardness) and fiber length. PETAX® 0386A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETROFIBE® 0201A | The International Group, Inc. (IGI Wax) | PETROFIBE® 0201A is a dark brown industrial grade petrolatum of medium-hard consistency. PETROFIBE® 0201A finds economical use in applications not requiring the more expensive USP or NF grades. | |
| PETROFIBE® 0251A | The International Group, Inc. (IGI Wax) | PETROFIBE® 0251A is a mixture of soft petroleum waxes. | |
| VAPORGUARD® R5341B | The International Group, Inc. (IGI Wax) | VAPORGUARD® R5341B is a water-based coating designed for corrugated board liners and other paper based substrates. It can be used for any packaging application that requires excellent water resistance, and low rate of moisture vapor transmission (MVTR). | |
| VAPORGUARD® R5715A | The International Group, Inc. (IGI Wax) | VAPORGUARD® R5715A is a water-based coating designed for kraft liners. It can be used for any packaging application that requires excellent water resistance, and low rate of moisture vapor transmission (MVTR). |
