| CF19-2186 | NuSil Silicone Technology 1 | CF19-2186 is a general purpose silicone elastomer that has a medium cure rate and is provided in mix and dispense applicators. This product can provide protection for assemblies and electronic components against, vibration, shock, ozone, moisture, dust an...展开 CF19-2186 is a general purpose silicone elastomer that has a medium cure rate and is provided in mix and dispense applicators. This product can provide protection for assemblies and electronic components against, vibration, shock, ozone, moisture, dust and other contaminants. It can also be utilized as an encapsulating or potting material, and can replicate surfaces and devices. 收起 | |
| Copper Chromite Black P2028 | Dongguan Hailerui Chemical Co., Ltd. | Copper Chromite Black P2028 is an inorganic pigment that appears as a black powder. This product has an oil absorption of 17-26 and a moisture content of <0.2%. It can be used in high temperature inks and paints. | |
| Hailerui Cadmium Red P2018 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Red P2018 is an inorganic pigment that appears as a red powder. This product has an oil absorption of 16-23 and a moisture content of <0.5%. It can be used in paints, coatings, and art gravure painting inks. | |
| Hailerui Cadmium Yellow P2037-1 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Yellow P2037-1 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks. | |
| Hailerui Cadmium Yellow P2037-4 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Yellow P2037-4 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks. | |
| Hailerui Cadmium Yellow P2037-5 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Yellow P2037-5 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks. | |
| Hailerui Permanent Violet P.V.23BL | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Permanent Violet P.V.23BL is a high performance organic pigment that appears as a violet powder. This product has an oil absorption of 38-53 g/100g and a pH value of 6.2. It can be used in paints, printing inks, and textiles. | |
| Hailerui Permanent Violet P.V.23RL | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Permanent Violet P.V.23RL is a high performance organic pigment that appears as a violet powder. This product has an oil absorption of 38-53 g/100g and a pH value of 6.2. It can be used in paints, printing inks, and textiles. | |
| Hailerui Phthalocyanine Blue P.B.15:0 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:0 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Blue P.B.15:1 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:1 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Blue P.B.15:2 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:2 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Blue P.B.15:3 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:3 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Blue P.B.15:4 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:4 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Green PG7 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Green PG7 is an organic copper pigment that appears as a dark green powder. This product has an oil absorption of 30-45 g/100g and a pH value of 6.5-8. It can be used in coatings, paints, inks, and printing paste. | |
| Hailerui Titanium Yellow 42-118A | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Titanium Yellow 42-118A is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks. | |
| Hailerui Titanium Yellow K2001 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Titanium Yellow K2001 is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks. | |
| Hailerui Titanium Yellow K2001FG | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Titanium Yellow K2001FG is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks. | |
| Hailerui Titanium Yellow TY-300 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Titanium Yellow TY-300 is an inorganic pigment that appears as a dark yellow powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks. | |
| Hailerui Ultramarine Blue 5008 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue 5008 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue EP-19 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue EP-19 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue EP-25 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue EP-25 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue EP-37 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue EP-37 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue GP-58 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue GP-58 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue RS-05 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue RS-05 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue RS-06 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue RS-06 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| LS-6140 | NuSil Silicone Technology 1 | LS-6140 is a two-part, optically clear silicone system that is based on a methyl silicone polymer, and has a low viscosity. It can be used for casting, injecting or bonding molidng of high performance optical components. It can also be used for photonics ...展开 LS-6140 is a two-part, optically clear silicone system that is based on a methyl silicone polymer, and has a low viscosity. It can be used for casting, injecting or bonding molidng of high performance optical components. It can also be used for photonics applications that require a low outgassing and minimal volatile condensables to protect sensitive devices from condensation. 收起 | |
| LS-6941 | NuSil Silicone Technology 1 | LS-6941 is an optical thermoset that is solvent free, and has a low viscosity. It will cure at room temperature or more rapidly when heat is added. It can be used for the bonding, casting or injecting molding of high performance optical components. This s...展开 LS-6941 is an optical thermoset that is solvent free, and has a low viscosity. It will cure at room temperature or more rapidly when heat is added. It can be used for the bonding, casting or injecting molding of high performance optical components. This silicone is also ideal for applications that require index matching at 1.41. It is suitable for applications that require an operating temperature range of -65 to 240°C (–85 to 465°F). 收起 | |
| R-1008-0 | NuSil Silicone Technology 1 | R-1008-0 is a translucent, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating mus...展开 R-1008-0 is a translucent, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 收起 | |
| R-1008-1 | NuSil Silicone Technology 1 | R-1008-1 is a white, RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating t...展开 R-1008-1 is a white, RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F).This product can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. 收起 | |
| R-1008-2 | NuSil Silicone Technology 1 | R-1008-2 is a black RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion, and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating t...展开 R-1008-2 is a black RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion, and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F).This product can be used on silicone rubber parts as a marking ink where the coating must maintain long term stability. 收起 | |
| R-1008-3 | NuSil Silicone Technology 1 | R-1008-3 is a red, non corrosive, flowable silicone elastomer dispersion that cures in 7 days at room temperature. This product is long lasting, and is used as a marking ink for silicone rubber parts as well as other components that require a coating with...展开 R-1008-3 is a red, non corrosive, flowable silicone elastomer dispersion that cures in 7 days at room temperature. This product is long lasting, and is used as a marking ink for silicone rubber parts as well as other components that require a coating with long term stability. 收起 | |
| R-1008-4 | NuSil Silicone Technology 1 | R-1008-4 is an orange, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must ma...展开 R-1008-4 is an orange, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 收起 | |
| R-1008-5 | NuSil Silicone Technology 1 | R-1008-5 is a yellow, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must mai...展开 R-1008-5 is a yellow, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 收起 | |
| R-1008-6 | NuSil Silicone Technology 1 | R-1008-6 is a green, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must main...展开 R-1008-6 is a green, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 收起 | |
| R-1008-7 | NuSil Silicone Technology 1 | R-1008-7 is a blue, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maint...展开 R-1008-7 is a blue, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 收起 | |
| R-1008-8 | NuSil Silicone Technology 1 | R-1008-8 is a violet, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must mai...展开 R-1008-8 is a violet, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 收起 | |
| R-2100-1 | NuSil Silicone Technology 1 | R-2100-1 is a white silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...展开 R-2100-1 is a white silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. 收起 | |
| R-2100-2 | NuSil Silicone Technology 1 | R-2100-2 is a black silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...展开 R-2100-2 is a black silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. 收起 | |
| R-2100-3 | NuSil Silicone Technology 1 | R-2100-3 is a red silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal ...展开 R-2100-3 is a red silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. 收起 | |
| R-2100-6 | NuSil Silicone Technology 1 | R-2100-6 is a green silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...展开 R-2100-6 is a green silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. 收起 | |
| Cenomic™ 1 | Bühler AG | Cenomic™ 1 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler S...展开 Cenomic™ 1 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. 收起 |  |
| Cenomic™ 15 | Bühler AG | Cenomic™ 15 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler ...展开 Cenomic™ 15 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. 收起 |  |
| Cenomic™ 3 | Bühler AG | Cenomic™ 3 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler S...展开 Cenomic™ 3 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. 收起 |  |
| Cenomic™ 6 | Bühler AG | Cenomic™ 6 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler S...展开 Cenomic™ 6 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. 收起 |  |
| MacroMedia™ | Bühler AG | MacroMedia™的高性能泵和小体积研磨个体的组合是市场上独一无二的。由于在预研磨阶段有更好的工艺控制，原材料质量的波动得以平衡，并实现预研磨中间体产品的均匀性能。这款产品最优化了精细研磨的结果，并提高了最终产品的质量。同时，与其它预研磨解决方案相比，该系统由于有更好的材料回收率和优化的能量效率而降低了成本。 |  |
| MicroMedia™ L | Bühler AG | MicroMedia™ L is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMe...展开 MicroMedia™ L is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 |  |
| MicroMedia™ L-C | Bühler AG | MicroMedia™ L-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The Micro...展开 MicroMedia™ L-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 |  |
| MicroMedia™ P1-C | Bühler AG | MicroMedia™ P1-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The Micr...展开 MicroMedia™ P1-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 |  |
| MicroMedia™ P2-C | Bühler AG | MicroMedia™ P2-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The Micr...展开 MicroMedia™ P2-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 |  |
| MicroMedia™ X1 | Bühler AG | MicroMedia™ X1 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...展开 MicroMedia™ X1 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 |  |
| MicroMedia™ X2 | Bühler AG | MicroMedia™ X2 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...展开 MicroMedia™ X2 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 |  |
| MicroMedia™ X3 | Bühler AG | MicroMedia™ X3 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...展开 MicroMedia™ X3 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 |  |
| MicroMedia™ X4 | Bühler AG | MicroMedia™ X4 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...展开 MicroMedia™ X4 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 |  |
| Performix™ HSD-15 | Bühler AG | Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Availabl...展开 Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Available in the regions Latin America, Asia, Middle East and Africa 收起 |  |
| Performix™ HSD-20 | Bühler AG | Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Availabl...展开 Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Available in the regions Latin America, Asia, Middle East and Africa 收起 |  |
| Performix™ HSD-30 | Bühler AG | Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Availabl...展开 Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Available in the regions Latin America, Asia, Middle East and Africa 收起 |  |
| Performix™ HSD-40 | Bühler AG | Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Availabl...展开 Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Available in the regions Latin America, Asia, Middle East and Africa 收起 |  |
| PML 2 | Bühler AG | The PML 2 is the optimal solution for the development of innovative wet grinding processes. The core piece is a robust and powerful drive and control unit which can be combined with different process units tailored to specific applications. If for true gr...展开 The PML 2 is the optimal solution for the development of innovative wet grinding processes. The core piece is a robust and powerful drive and control unit which can be combined with different process units tailored to specific applications. If for true grinding applications, metal-free dispersion of electronic materials or nano applications – the PML 2 is the right solution. 收起 |  |
| PML easy | Bühler AG | PML easy is a universal bead mill platform for lab-scaled process development has a modular design and offers unmatched flexibility. Its core piece is a resistant and powerful drive which can be combined with two different process units tailored to specif...展开 PML easy is a universal bead mill platform for lab-scaled process development has a modular design and offers unmatched flexibility. Its core piece is a resistant and powerful drive which can be combined with two different process units tailored to specific applications. *Available in the regions Latin America, Asia, Middle East and Africa 收起 |  |
| Trias™ 300 | Bühler AG | Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international st...展开 Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international standards. The camberless VIVA™ roll technology guarantees even product quality independent of the roll pressure. 收起 |  |
| Trias™ 600 | Bühler AG | Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international st...展开 Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international standards. The camberless VIVA™ roll technology guarantees even product quality independent of the roll pressure. 收起 |  |
| Trias™ 800 | Bühler AG | Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international st...展开 Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international standards. The camberless VIVA™ roll technology guarantees even product quality independent of the roll pressure. 收起 |  |
| Trinomic™ 1300 | Bühler AG | Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative...展开 Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative paints, toners, coatings and lubricants, but also for materials for the cosmetics industries. The three-roll mill is designed for meeting high quality demands and at the same time enables convenient, easy operation and quick cleaning 收起 |  |
| Trinomic™ 600 | Bühler AG | Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative...展开 Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative paints, toners, coatings and lubricants, but also for materials for the cosmetics industries. The three-roll mill is designed for meeting high quality demands and at the same time enables convenient, easy operation and quick cleaning 收起 |  |
