| Cimsil A35 | Tolsa SA | Cimsil A35 is a powdered additive that modifies the rheology of mortar, gypsum plaster, and concrete. It is a thixotropic additive specifically developed to act as an anti-sagging, anti-slipping agent that improves the work ability and visual finish in ...展开 Cimsil A35 is a powdered additive that modifies the rheology of mortar, gypsum plaster, and concrete. It is a thixotropic additive specifically developed to act as an anti-sagging, anti-slipping agent that improves the work ability and visual finish in the systems to which it is incorporated. It can be used in ceramic adhesives, ready mixed adhesives, crack fillers, and pastes. 收起 | |
| Cimsil A55G | Tolsa SA | Cimsil A55G is a thixotropic powder additive. It can be used in cement and/or lime and gypsum systems. It is used as an additive for mortars and stuccos rendering, tile adhesive mortars, self-leveling mortars, and waterproofing mortars. | |
| Cimsil C22 | Tolsa SA | Cimsil C22 is a water dispersible powdered additive for use in mortars. It is developed to act as a water-retaining agent and a rheological additive. It can be used for projected renders and stuccos, skim coats, and monolayer mortars. | |
| Cimsil CT1 | Tolsa SA | Cimsil CT1 is a water dispersible powdered additive. It is developed to act as a water-retaining agent and as an anti-sliding additive in formulations of tile adhesive mortars. It can be used in mortars and tile adhesives. | |
| Cimsil CT2 | Tolsa SA | Cimsil CT2 is a water dispersible powdered additive. It is developed to act as a water-retaining agent and as an anti-sliding additive in formulations of tile adhesives. It can be used in mortars and tile adhesives. | |
| Cimsil D10 | Tolsa SA | Cimsil D10 is a water dispersible powdered additive. It is designed to act as a water-retaining agent and an anti-sliding additive. It can be used in ceramic adhesives, adhesives, crack fillers, and pastes. | |
| Cimsil G30 | Tolsa SA | Cimsil G30 is an attapulgite based additive developed to modify the rheology of wet and dry joint compounds and adhesives. It is developed to improve sag resistance of the compound before drying or setting. It can be used in wet and dry joint fillers, s...展开 Cimsil G30 is an attapulgite based additive developed to modify the rheology of wet and dry joint compounds and adhesives. It is developed to improve sag resistance of the compound before drying or setting. It can be used in wet and dry joint fillers, spackle compounds, crack fillers, mastics, and sealants. 收起 | |
| Cimsil G50 | Tolsa SA | Cimsil G50 is a thixotropic and shear thinning additive. It is developed as an anti-sagging agent in gypsum systems. It can be used for gypsum spray plasters, gypsum compounds, and gypsum based adhesives. | |
| Fillite Standard Grades | Tolsa SA | Fillite Standard Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weight of plastics, rubbers, resins, and cement. It can be used in PVC flooring, brake linings, phenolics and epoxies, cast polyesters, wallboar...展开 Fillite Standard Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weight of plastics, rubbers, resins, and cement. It can be used in PVC flooring, brake linings, phenolics and epoxies, cast polyesters, wallboard joint compounds, oil well cement, and tile adhesives. 收起 | |
| Fillite White / High-Alumina Grades | Tolsa SA | Fillite White / High Alumina Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weights fo plastics, rubbers, resins, and cement. It can be used for gypsum board jointing compounds, veneering plasters, stuccos, s...展开 Fillite White / High Alumina Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weights fo plastics, rubbers, resins, and cement. It can be used for gypsum board jointing compounds, veneering plasters, stuccos, sealants, coatings, cast resins, refractories, foundry applications, or high temperatures resistant coatings. 收起 | |
| Microsil 100 | Tolsa SA | Microsil 100 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor....展开 Microsil 100 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, textural paint, putties and mastics, and tile adhesives. 收起 | |
| Microsil 100S | Tolsa SA | Microsil 100S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting...展开 Microsil 100S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor that also require a lower viscosity or smaller absorption. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, textural paint, putties and mastics, and tile adhesives. 收起 | |
| Microsil 200 | Tolsa SA | Microsil 200 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. ...展开 Microsil 200 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, putties and mastics, and tile adhesives. 收起 | |
| Microsil 200S | Tolsa SA | Microsil 200S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting f...展开 Microsil 200S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor that also require a lower viscosity or smaller absorption. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, putties and mastics, and tile adhesives. 收起 | |
| Microsil 325 | Tolsa SA | Microsil 325 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It was designed to be used in applications requiring a small particle size. It can be ...展开 Microsil 325 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It was designed to be used in applications requiring a small particle size. It can be used in synthetic marble and polymeric mortars, asphalt emulsions, resin based waterproofing coatings, friction materials, textural paints, putties, and mastics. 收起 | |
| Microsil 325S | Tolsa SA | Microsil 325 consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It was designed to be used in applications requiring a small particle size or in a...展开 Microsil 325 consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It was designed to be used in applications requiring a small particle size or in applications where a lower viscosity or smaller absorption is required. It can be used in synthetic marble and polymeric mortars, asphalt emulsions, resin based waterproofing coatings, friction materials, textural paints, putties, and mastics. 收起 | |
| Pangel AD | Tolsa SA | Pangel AD is a rheological additive that is manufactured from high purity sepiolite. It controls system flow and consistency for components such as solvents and fillers. It can be used in water-based paints, foundry coatings, friction elements, gaskets,...展开 Pangel AD is a rheological additive that is manufactured from high purity sepiolite. It controls system flow and consistency for components such as solvents and fillers. It can be used in water-based paints, foundry coatings, friction elements, gaskets, epoxy adhesives, sealants, and mastics. 收起 | |
| Pangel B10 | Tolsa SA | Pangel B10 is a powdered additive with high thickening and anti-settling capacity for medium-low polarity systems. It offers thixotropic, suspension, and sagging resistance properties based on White Spirit type solvents. It can be used in paints, coatin...展开 Pangel B10 is a powdered additive with high thickening and anti-settling capacity for medium-low polarity systems. It offers thixotropic, suspension, and sagging resistance properties based on White Spirit type solvents. It can be used in paints, coatings, printing inks, drilling mud, greases, sealants and joints, asphalt coatings, putties, rubber, gel-coat, and emulsions. 收起 | |
| Pangel B20 | Tolsa SA | Pangel B20 is a powdered additive with high thickening and anti-setting capacity for intermediate polarity systems. It provides thixotropic, suspension, and sagging resistance properties to systems based on aromatic and unsaturated polyester type solvent...展开 Pangel B20 is a powdered additive with high thickening and anti-setting capacity for intermediate polarity systems. It provides thixotropic, suspension, and sagging resistance properties to systems based on aromatic and unsaturated polyester type solvents. It can be used in paints, coatings, printing inks, unsaturated polyester putties, paint strippers, greases, asphalt coatings, sealants and joints, plastisol and rubber, emulsions, gel-coats, and nail varnish,. 收起 | |
| Pangel B40 | Tolsa SA | Pangel B40 is a powdered additive with high thickening and anti-settling capacity for high polarity systems, particularly those based on alcohol, glycol, or ketone type solvents, or in mixtures of those with water. It is recommended to provide thixotropi...展开 Pangel B40 is a powdered additive with high thickening and anti-settling capacity for high polarity systems, particularly those based on alcohol, glycol, or ketone type solvents, or in mixtures of those with water. It is recommended to provide thixotropic, suspension, and sagging-resistance properties. It can be used in coatings, paints, printing inks, paint strippers, sealants and joints, vinyl plastisol, gel-coat, nail varnish, wash coat alcohols, glycols, and esters. 收起 | |
| Pangel B5 | Tolsa SA | Pangel B5 is a powdered additive with a high thickening and anti-setting capacity for low polarity systems, particularly those based on both aliphatic solvents and mineral or synthetic oils. It provides thixotropic, suspension and sagging-resistance prop...展开 Pangel B5 is a powdered additive with a high thickening and anti-setting capacity for low polarity systems, particularly those based on both aliphatic solvents and mineral or synthetic oils. It provides thixotropic, suspension and sagging-resistance properties based on both aliphatic type solvents and mineral or synthetic oils. It can be used in solvent-borne paints and coatings, lubricant greases, and drilling mud. 收起 | |
| Pangel HV | Tolsa SA | Pangel HV is a rheological additive that is manufactured using high purity sepiolite in the form of high porosity pellets. It controls system flow and consistency of components including solvents and fillers. It can be used in fibro-cement, water-based ...展开 Pangel HV is a rheological additive that is manufactured using high purity sepiolite in the form of high porosity pellets. It controls system flow and consistency of components including solvents and fillers. It can be used in fibro-cement, water-based paints, foundry coatings, asphalt emulsions, suspension fertilisers, and liquid fertilisers. 收起 | |
| Pangel M100 | Tolsa SA | Pangel M100 is a thickening and anti-settling agent made of purified bentonite clay. It is developed to give water-borne formulations with stability, viscosity and adhesion control as well as texturing and surface finishing. It is used for adhesives, em...展开 Pangel M100 is a thickening and anti-settling agent made of purified bentonite clay. It is developed to give water-borne formulations with stability, viscosity and adhesion control as well as texturing and surface finishing. It is used for adhesives, emulsion paints, textural paints, and bituminous emulsion. 收起 | |
| Pangel M150 | Tolsa SA | Pangel M150 is a thickening and anti-setting agent made of purified bentonite clay. It was developed for providing water-borne formulations with stability and viscosity control, sedimentation and sagging control, workability, and water retention. It can...展开 Pangel M150 is a thickening and anti-setting agent made of purified bentonite clay. It was developed for providing water-borne formulations with stability and viscosity control, sedimentation and sagging control, workability, and water retention. It can be used for adhesives, bituminous emulsion, and seed coatings. 收起 | |
| Pangel M280 | Tolsa SA | Pangel M280 is a thickening and anti-setting agent made of purified bentonite clay. It is developed to provide water-borne formulations with stability and viscosity control, adhesion control, texturing and stippling effects, and strong binding properties...展开 Pangel M280 is a thickening and anti-setting agent made of purified bentonite clay. It is developed to provide water-borne formulations with stability and viscosity control, adhesion control, texturing and stippling effects, and strong binding properties. It can be used for adhesives, emulsion paints, bituminous emulsion, textural paints, and granulation and agglomeration. 收起 | |
| Pangel OM4 | Tolsa SA | Pangel OM4 is a rheological additive for intermediate to low polarity systems made from purified bentonite clay. It is recommended for solvent-borne systems that require thixotropic and pseudoplastic effects, sag control, levelling, pigment settling, and...展开 Pangel OM4 is a rheological additive for intermediate to low polarity systems made from purified bentonite clay. It is recommended for solvent-borne systems that require thixotropic and pseudoplastic effects, sag control, levelling, pigment settling, and high viscosity and consistency over a wide temperature range. it can be used in anti-corrosive paints, polyester coatings, primers, industrial finishes road marking paints, varnishes, lubricating greases, and bituminous undercoats. 收起 | |
| Pangel OM8 | Tolsa SA | Pangel OM8 is a rheological additive for low to medium polarity systems made from purified bentonite clay. It is recommended for systems based on resins such as polyurethanes, acrylics, polyester, epoxy esters, and alkyds. It can be used in anti-corrosi...展开 Pangel OM8 is a rheological additive for low to medium polarity systems made from purified bentonite clay. It is recommended for systems based on resins such as polyurethanes, acrylics, polyester, epoxy esters, and alkyds. It can be used in anti-corrosive paints, polyester coatings, primers, industrial finishes, road marking paints, bituminous undercoats, varnishes, and inks. 收起 | |
| Pangel OMD1 | Tolsa SA | Pangel OMD1 is a self-dispersing rheological additive for medium to low polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control...展开 Pangel OMD1 is a self-dispersing rheological additive for medium to low polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, and pigment settling prevention. It can be used in anti-corrosive paints, polyester coatings, primers, industrial finishes, road marking paints, varnishes, lubricating greases, and bituminous undercoats. 收起 | |
| Pangel OMD2 | Tolsa SA | Pangel OMD2 is a rheological additive for medium to high polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, an...展开 Pangel OMD2 is a rheological additive for medium to high polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, and pigment settling prevention. It can be used in anti-corrosive paints, adhesives, industrial finishes, maintenance coatings, epoxy based coatings, and paint removers. 收起 | |
| Pangel S9 | Tolsa SA | Pangel S9 is a powdered rheological additive made from sepiolite for use in aqueous systems. It controls the system flow and consistency of components including solvents and fillers. It can be used for asphalt sheets and emulsions, anti-corrosion coatin...展开 Pangel S9 is a powdered rheological additive made from sepiolite for use in aqueous systems. It controls the system flow and consistency of components including solvents and fillers. It can be used for asphalt sheets and emulsions, anti-corrosion coatings, water-based paints, foundry coatings, friction elements, gaskets, epoxy adhesives, sealants and mastics, and additives for cement and gypsum systems. 收起 | |
| Pansil | Tolsa SA | Pansil is a polyfunctional additive manufactured from sepiolite. It is used as a suspension aid and active filler. It can be used in asphalt sheets, multi-color paints, and rubber. | |
| Pansil 100 | Tolsa SA | Pansil 100 is a polyfunctional additive, which is supplied as a fine powder manufactured from sepiolite. It can be used as a suspension aid and active filler. It can be used in asphalt sheets, conglomeration in molecular sieves, seed coating, and asphal...展开 Pansil 100 is a polyfunctional additive, which is supplied as a fine powder manufactured from sepiolite. It can be used as a suspension aid and active filler. It can be used in asphalt sheets, conglomeration in molecular sieves, seed coating, and asphalt emulsions. 收起 | |
| Pansil UltraSpheres™ 2000 | Tolsa SA | Pansil UltraSpheres™ 2000 consists of ceramic microspheres. It is used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in film/antiblock applications, top coats, high solid industrial coatings, an...展开 Pansil UltraSpheres™ 2000 consists of ceramic microspheres. It is used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in film/antiblock applications, top coats, high solid industrial coatings, and decorative powder coatings. 收起 | |
| Pansil UltraSpheres™ 4000 | Tolsa SA | Pansil UltraSpheres™ 4000 consists of ceramic microspheres. It can be used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in high solid industrial coatings, heavy duty maintenance coatings, marin...展开 Pansil UltraSpheres™ 4000 consists of ceramic microspheres. It can be used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in high solid industrial coatings, heavy duty maintenance coatings, marine coatings, aircraft coatings, water reducible industrial coatings, powder coatings, coil coatings, radiation-curable inks and coatings, and primers. 收起 | |
| Pansil UltraSpheres™ 6000 | Tolsa SA | Pansil UltraSperes™ 6000 consists of ceramic microspheres. It can be used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in polymer concrete, epoxy flooring, textured coatings, and friction mater...展开 Pansil UltraSperes™ 6000 consists of ceramic microspheres. It can be used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in polymer concrete, epoxy flooring, textured coatings, and friction materials. 收起 | |
| Pansil UltraSpheres™ 8000 | Tolsa SA | Pansil UltraSpheres™ 8000 consists of ceramic microspheres. They are used as additives and fillers and paints, coatings, mastics, and other construction materials. It can be used in polymer concrete, epoxy flooring, textured coatings, and friction mater...展开 Pansil UltraSpheres™ 8000 consists of ceramic microspheres. They are used as additives and fillers and paints, coatings, mastics, and other construction materials. It can be used in polymer concrete, epoxy flooring, textured coatings, and friction materials. 收起 | |
| ATEX Filling Machine | Würschum GmbH | ATEX Filling Machine is for filling inflammable liquids and foaming products. Consists of several pistons with drip-preventer and conveyor, optionally with fully automatic capping machine. |  |
| ATEX Twin Piston Filling Machine PS-1000-2-NV-AT | Würschum GmbH | ATEX Twin Piston Filling Machine PS-1000-2-NV-AT is for filling flammable liquid and viscous products. Consisting of 2 pistons with drip-preventer. Adjustable working platform. Easy to clean. Pneumatic drive. |  |
| ATEX Twin Piston Filling Machine PS-1000-2-UA-NV-AT | Würschum GmbH | ATEX Twin Piston Filling Machine PS-1000-2-UA-NV-AT is for filling flammable liquid and viscous products. Consisting of 2 pistons with diving nozzles for foaming products, drip-preventer, adjustable working platform. Easy to clean. Pneumatic drive. |  |
| Automatic Capper AV-200 | Würschum GmbH | Automatic Capper AV-200 is a auto-capper with feeding system for screw caps and press caps. Caps are placed on the bottle by a feeding system and each bottle is fed to the capper. |  |
| Electrical Filling Machine Touch Fill 1000 | Würschum GmbH | Electrical Filling Machine Touch Fill 1000 is a semi automatic electrical filling machine for liquid products, Stainless steel design with Touch screen and recipe manager. Products include cleaning detergent, thinner, polish, rust-proofing, ink, paint, va...展开 Electrical Filling Machine Touch Fill 1000 is a semi automatic electrical filling machine for liquid products, Stainless steel design with Touch screen and recipe manager. Products include cleaning detergent, thinner, polish, rust-proofing, ink, paint, varnish, shampoo, hair tonic, body lotion, oil, juice, soup, ketchup, jam, medicine etc. 收起 |  |
| Filling Line AFS 1000-4 | Würschum GmbH | Filling Line AFS 1000-4 is for filling of liquid and viscous products, e.g. car polish. Comprising of four-piston filler with rotary slide valve, drip prevention, fully automatic capping machine and conveyor. Servo-motor drive and electropneumatic control...展开 Filling Line AFS 1000-4 is for filling of liquid and viscous products, e.g. car polish. Comprising of four-piston filler with rotary slide valve, drip prevention, fully automatic capping machine and conveyor. Servo-motor drive and electropneumatic control with microprocessor. 收起 |  |
| Filling Line PA-10 000-UA-NV | Würschum GmbH | Filling Line PA-10 000-UA-NV is for filling liquid and viscous products, with drip preventer and diving nozzle for foaming products, roller conveyor and screwer. Pneumatically operated. |  |
| Filling Line- and Capping Machine AFS-1000-4 / AV-200 | Würschum GmbH | Filling Line- and Capping Machine AFS-1000-4 / AV-200 is a 4-fold fully automatic filling and capping line for liquids and pastes. ZIP-cleaning connections, piston rinsing, aseptic pistons, Mono-block built. Perfect for mayonnaise, ketchup, salad dressing...展开 Filling Line- and Capping Machine AFS-1000-4 / AV-200 is a 4-fold fully automatic filling and capping line for liquids and pastes. ZIP-cleaning connections, piston rinsing, aseptic pistons, Mono-block built. Perfect for mayonnaise, ketchup, salad dressings, marinades etc. 收起 |  |
| Filling Machine ESP 1000-UA-TR | Würschum GmbH | Filling Machine ESP 1000-UA-TR is the same construction and capacities as PS- Series. Completely designed in stainless steel for explosion proof areas. Perfect in filling liquids, foamy, viscous, and explosion endangered products. |  |
| Filling Machine H 200-TR | Würschum GmbH | Filling Machine H 200-TR is a manual volumetric piston dosing machine. Ready to use, easy handling, and easy to clean. |  |
| Filling Machine H 500-P | Würschum GmbH | Filling Machine H 500-P is a pneumatic volumetric piston dosing machine. It is ready to use, easy handling, and easy to clean. |  |
| Filling Machine PS 1000-DS-TR | Würschum GmbH | Filling Machine PS 1000-DS-TR is a filling machine for products with pieces with rotary slide and hopper for pasty products and for products with pieces. Ready to use, easy handling, and easy to clean. |  |
| Filling- and Capping Machine AFP-100-2 / AV-200 | Würschum GmbH | Filling- and Capping Machine AFP-100-2 / AV is a fully automatic Filling- and Capping machine for liquid products. Filling range can be increased with exchange sets up to 1050 ml. The settings for the filling range are done manually. The pistons are power...展开 Filling- and Capping Machine AFP-100-2 / AV is a fully automatic Filling- and Capping machine for liquid products. Filling range can be increased with exchange sets up to 1050 ml. The settings for the filling range are done manually. The pistons are powered by a pneumatic drive. The capper is programmable and powered by a servo drive. Optionally bottle feeder can be added. Cap handling with vibration system. 收起 |  |
| Filling- and Capping Machine AFS-1000-4 / AV-200 | Würschum GmbH | Filling- and Capping Machine AFS-1000-4 / AV-200 is a 4-fold fully automatic filling and capping line for liquid and foaming products. Up to 5000 ml with stroke preselector. Including bottle feeder and turn table and fume extraction. Optional with labelin...展开 Filling- and Capping Machine AFS-1000-4 / AV-200 is a 4-fold fully automatic filling and capping line for liquid and foaming products. Up to 5000 ml with stroke preselector. Including bottle feeder and turn table and fume extraction. Optional with labeling machine. 收起 |  |
| Manual Filling Machine for Pastes, Creames Type VH 150 | Würschum GmbH | Manual Filling Machine for Pastes, Creames Type VH 150 is a filling range from 10 – 150 ml, exchange set for small filling volumes from 3-15 ml available. Tube filling nozzles, agitator and heatable hopper optional. |  |
| Manual Screwers SPH2-DE/SEH2-DE | Würschum GmbH | Manual Screwers SPH2-DE/SEH2-DE is SPH-2-DE (pneumatically) and SEH-2-DE (electrically). Suitable for screw caps and press caps for safe and exact torque capping jars, bottles, containers, cans etc. |  |
| Manual Srewer SPH2/SEH2 | Würschum GmbH | Manual Srewer SPH2/SEH2 is SPH-2 (pneumatically) and SEH-2 (electrically). Suitable for smaller bottles with screw caps, for safe and exact torque capping, for jars, bottles, containers, cans etc. |  |
| Pneumatic Press Capper DE-1 | Würschum GmbH | Pneumatic press capper with a two-hand security control. Place the press cap manually on the bottle. Move the bottle towards the capping position until it touches the stop. Press both start bottons at the same time. The punch goes down and presses the cap...展开 Pneumatic press capper with a two-hand security control. Place the press cap manually on the bottle. Move the bottle towards the capping position until it touches the stop. Press both start bottons at the same time. The punch goes down and presses the cap on. Thereafter, the punch returns to its original position and the bottle can be removed. 收起 |  |
| Semi-Automatic Capper SPA-20 | Würschum GmbH | Semi-Automatic Capper SPA-20 is for screw caps and press caps. Place the cap manually on the bottle. The bottle is fed by the conveyor to the capper. The bottle will be positioned and when necessary gently pressed between the jaws. |  |
| Twin-Piston Filling Machine PS 1000-2-UA | Würschum GmbH | Twin-Piston Filling Machine PS 1000-2-UA is a pneumatic volumetric piston dosing machines with diving nozzles and drip prevention for foaming products. Ready to use, easy handling, and easy to clean. |  |
| Twin-Piston Filling Machine PSV-1000-2-UA-NV | Würschum GmbH | Twin-Piston Filling Machine PSV-1000-2-UA-NV is for filling liquid and viscous products. Twin piston filling machine with drip preventer and diving nozzle for foaming products, working level control. Easy to clean. Pneumatically operated. |  |
