| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| ALNOVOL® UF 410 RPC | Allnex | ALNOVOL® UF 410 RPC is a carbamic resin on silica. It is compatible with most of the synthetic and natural rubbers. Due to the silica carrier in solvents, no clear solution is possible. | Request Sample |
| AQUACER® 593 | BYK 毕克 | 改性聚丙烯蠟的非離子水性乳液，提高水性地板漆和地板上光劑的表面防護性。 | |
| Benzyl Benzoate, USP | Chemceed | Benzyl Benzoate is a high solvating benzoate ester plasticizer that can be used in applications such as adhesives, caulks, and sealants. In inks and coatings, Benzyl Benzoate can soften binders to improve flexibility. | |
| Dibutyl Phthalate (DBP) | Chemceed | 鄰苯二甲酸二丁酯是一種增塑劑，通常應用於PVC和涂料中。ChemCeed以桶裝、手提袋裝和散裝供應。包裝需定制的請來電查問 | |
| Dioctyl Sebacate (DOS) | Chemceed | Dioctyl Sebacate (DOS) is a phthalate-free plasticizer used for PVC, nitrocelluloses, styrene resins, and synthetic rubbers where low temperature performance is required. It is soluble in hydrocarbons, alcohols, ester, chlorocarbons, ether, benzene and o...展開 Dioctyl Sebacate (DOS) is a phthalate-free plasticizer used for PVC, nitrocelluloses, styrene resins, and synthetic rubbers where low temperature performance is required. It is soluble in hydrocarbons, alcohols, ester, chlorocarbons, ether, benzene and other organic solvents. DOS is recommended for use in adhesives and sealants. 收起 | |
| Dioctyl Terephthalate (DOTP) | Chemceed | Dioctyl Terephthalate (DOTP) is a general purpose plasticizer, and can be used as a phthalate replacement. As a PVC plasticizer, DOTP is used in formualtions of screen printing inks. Additionally, DOTP can be used in applications such as paints, lacque...展開 Dioctyl Terephthalate (DOTP) is a general purpose plasticizer, and can be used as a phthalate replacement. As a PVC plasticizer, DOTP is used in formualtions of screen printing inks. Additionally, DOTP can be used in applications such as paints, lacquers, inks, adhesives, and sealants. 收起 | |
| Epoxidized Soybean Oil (ESBO) | Penpet Petrochemical Trading GmbH | Epoxidized Soybean Oil (ESBO), in the form of a light yellow, thick, oily liquid, is a plasticizer than can be used in oil paints, adhesives, and printing inks. This product is derived from soybean oil through the reaction of unsaturated compounds with p...展開 Epoxidized Soybean Oil (ESBO), in the form of a light yellow, thick, oily liquid, is a plasticizer than can be used in oil paints, adhesives, and printing inks. This product is derived from soybean oil through the reaction of unsaturated compounds with peracids. Its boiling point is 150°C with an ignition point at 310°C. 收起 | |
| Epoxidized Soybean Oil (ESO) | Chemceed | 環氧化大豆油，是一種增塑劑，通常用於PVC和涂料應用。ChemCeed以桶裝、手提袋裝和散裝供應。包裝需定制的請來電查問 | |
| Hanwha 2-EH (2-Ethyl-1-Hexanol) | Hanwha Chemical Corporation | Hanwha 2-EH is an colorless, transparent liquid made of 2-Ethyl-1-Hexanol. It is primarily used as the main ingredient in the production of certain types of plasticizers. It is well suited for use in making solvents, stabilizers and acrylates as well. | |
| Hanwha DIDP (Diisodecyl Phthalate) | Hanwha Chemical Corporation | Hanwha DIDP is a transparent plasticizer made of Diisononyl Phthalate with excellent viscosity and outstanding electrical insulation. It is well suited for use in the production of films, sheets, leathers, wire coatings, wall papers and flooring materials...展開 Hanwha DIDP is a transparent plasticizer made of Diisononyl Phthalate with excellent viscosity and outstanding electrical insulation. It is well suited for use in the production of films, sheets, leathers, wire coatings, wall papers and flooring materials where ever cold, light and chemicals resistance is required. 收起 | |
| Hanwha I-BuOH (2-Methylpropan-1-Ol) | Hanwha Chemical Corporation | Hanwha I-BuOH is an colorless, transparent liquid made of 2-Methylpropan-1-Ol. It is primarily used as the main ingredient in the production of certain types of plasticizers. It is well suited for use in making solvents and amino resins as well. | |
| Hanwha PA (High-purity Phthalic Anhydride) | Hanwha Chemical Corporation | Hanwha PA is a pure white flaky solid at room temperature that when heated becomes a colorless transparent liquid. Made of High-purity Phthalic Anhydride, it is primarily used in the production of phthalate plasticizers. It can also be used in the product...展開 Hanwha PA is a pure white flaky solid at room temperature that when heated becomes a colorless transparent liquid. Made of High-purity Phthalic Anhydride, it is primarily used in the production of phthalate plasticizers. It can also be used in the production of FRP paints and spandex. 收起 | |
| HCCFlex SP-390 | Hanwha Chemical Corporation | HCCFlex SP-390 is a Non-phthalate plasticizer made of Dioctyl Terephthalate (DOTP) which is non-carcinogenic and contains no environmental hormones. It is well suited for use in the production of films, sheets, leathers, flooring materials, wall papers a...展開 HCCFlex SP-390 is a Non-phthalate plasticizer made of Dioctyl Terephthalate (DOTP) which is non-carcinogenic and contains no environmental hormones. It is well suited for use in the production of films, sheets, leathers, flooring materials, wall papers and wire coatings. 收起 | |
| Ketjenflex® 12 | Axcentive Sarl | Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl com...展開 Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl compounds, and PVC based plastisols. It can also be used in PVC based polymers, nitrocellulose resins, and cyanoacrylate adhesives. 收起 | |
| Ketjenflex® 6 | Axcentive Sarl | Ketjenflex® 6 is a toluene sulfonamide in the form of a white crystalline powder. It is used as a plasticizer in inks, adhesives, and coatings. Ketjenflex® 6 can be used with resins such as nitrocellulose, polyamide, PVAC, rosin, epoxy, and more. | |
| Ketjenflex® 8 | Axcentive Sarl | Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coa...展開 Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coatings, synthetic polyamides, epoxy coatings and adhesives, and more. 收起 | |
| Ketjenflex® MH | Axcentive Sarl | Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printi...展開 Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printing inks. 收起 | |
| Ketjenflex® MS 80 | Axcentive Sarl | Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured in...展開 Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured into desired formulations. It has applications in nitrocellulose coatings, cellulose acetate formulations, and printing inks. 收起 | |
| L911P Plasticizer | Chemceed | Linear 911P is a plasticizer used when low-temperature flexibility is required or for specific end-use applications that require unique processing where the performance requirements cannot be met with branched plasticizers. 911P is especially useful in a...展開 Linear 911P is a plasticizer used when low-temperature flexibility is required or for specific end-use applications that require unique processing where the performance requirements cannot be met with branched plasticizers. 911P is especially useful in anti- fogging coatings, automotive sealants, and shoe polish. 收起 | |
| Mono Propylene Glycol (High Grade) | LUKEM D.O.O. | Mono Propylene Glycol (High Grade) is a colorless, viscous, transparent liquid, which registers as a color number of 10 on the Pt/Co scale. The product is used as a raw material for coatings and synthetic resins. | |
| PETAX® 0310A | The International Group, Inc. (IGI Wax) | PETAX® 0310A is a cream white, odorless petrolatum of medium consistency (hardness) and fiber length. PETAX® 0310A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETAX® 0320A | The International Group, Inc. (IGI Wax) | PETAX® 0320A is a cream white, odorless petrolatum with a soft consistency and medium fiber length. PETAX® 0320A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETAX® 0386A | The International Group, Inc. (IGI Wax) | PETAX® 0386A is a white, odorless petrolatum of medium consistency (hardness) and fiber length. PETAX® 0386A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETROFIBE® 0201A | The International Group, Inc. (IGI Wax) | PETROFIBE® 0201A is a dark brown industrial grade petrolatum of medium-hard consistency. PETROFIBE® 0201A finds economical use in applications not requiring the more expensive USP or NF grades. | |
| PIB 10 | Braskem S.A. | PIB 10 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 10 is a non-toxic polymer. | |
| PIB 122 | Braskem S.A. | PIB 122 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 122 is a non-toxic polymer. | |
| PIB 128 | Braskem S.A. | PIB 128 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 128 is a non-toxic polymer. | |
| PIB 16 | Braskem S.A. | PIB 16 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. | |
| PIB 24 | Braskem S.A. | PIB 24 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 24 is a non-toxic polymer. | |
| PIB 240 | Braskem S.A. | PIB 240 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 240 is a non-toxic polymer. | |
| PIB 30 | Braskem S.A. | PIB 30 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 30 is a non-toxic polymer. | |
| PIB 32 | Braskem S.A. | PIB 32 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 32 is a non-toxic polymer. | |
| PIB 4 | Braskem S.A. | PIB 4 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 4 is a non-toxic polymer. | |
| PIB 6 | Braskem S.A. | PIB 6 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 6 is a non-toxic polymer. | |
| PIB 8 | Braskem S.A. | PIB 8 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 8 is a non-toxic polymer. | |
| RESAMIN® HF 480 | Allnex | 基於丁基氨基甲酸酯和甲醛的氨基甲酸樹脂 | Request Sample |
| Ruantatxib | Jiangsu Runtai Chemical Co., Ltd. | Ruantatxib, in the form of a colorless, transparent liquid, is a plasticizer that can be used in surface coatings and inks. This product is compatible with all primary and secondary plasticizers. This product contains less than .3% isobutyric acid. | |
| Triacetin, Industrial Grade | Jiangsu Ruijia Chemistry Co.,Ltd. | Triacetin, Industrial Grade, is a clear liquid without precipitates. It can be used in architectural wall coatings and as a solvent in printing ink. It is also used as a highly effective plasticizer for cellulose-based plastics. | |
| Trimellitic Anhydride (TMA) | Wuxi Baichuan Chemical Industrial Co., Ltd. | Trimellitic Anhydride (TMA), in the form of off-white to white flakes, is a plasticizer that can be used in heat-proof insulated paints and wire enamels, adhesives, and printing inks. This product's boiling point is 390℃ and its crystallization point beg...展開 Trimellitic Anhydride (TMA), in the form of off-white to white flakes, is a plasticizer that can be used in heat-proof insulated paints and wire enamels, adhesives, and printing inks. This product's boiling point is 390℃ and its crystallization point begins at 164℃. It is soluble in ethanol, acetone, and most other organic solvents. It is slightly soluble in water. 收起 | |
| Trioctyl Trimellitate (TOTM) | Chemceed | Trioctyl Trimellitate (TOTM) is a non-phthlate plasticizer that is useful in adhesives and epoxies. It is compatible with chlorinated rubber, epichlorohydrin, hydrogenated nitrile, hydrogenated rubber, polychloroprene and polyvinyl chloride. |
