| Akuarane DTP 1322 | T&L Co., Ltd. Polymer Technology Centre | Akuarane DTP 1322 is a milky white, liquid, waterborne polyurethane dispersion that displays good adhesion and rubbery feel. This product is ideal for use in textile coatings and adhesives. | |
| Akuarane DTP 1330 | T&L Co., Ltd. Polymer Technology Centre | Akuarane DTP 1330 is a milky white, liquid, waterborne polyurethane dispersion that displays high clearness and good emulsion and pH stability. It is an advanced version of Akuarane DTP 1322. This product is ideal for use in textile coatings and adhesives...weiterlesen Akuarane DTP 1330 is a milky white, liquid, waterborne polyurethane dispersion that displays high clearness and good emulsion and pH stability. It is an advanced version of Akuarane DTP 1322. This product is ideal for use in textile coatings and adhesives. verkürzen | |
| Baybond® PU 407 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® PU 407 is an anionic/non-ionic polyester urethane polymer, that can be used as the film-forming component in glass fiber sizes. This product is has milky white dispersion in water. This product has a non-volatile content (0.9-1.1g / 1h / 125°C, c...weiterlesen Baybond® PU 407 is an anionic/non-ionic polyester urethane polymer, that can be used as the film-forming component in glass fiber sizes. This product is has milky white dispersion in water. This product has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 40 ± 1, a flow time at 23°C, (4mmcup) of 11 - 18, and has a pH value 20°C (supply form) of 6.3 - 7.7. Baybond® PU 407 is particularly well suited for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® PU 407 are characterized by their outstanding film-forming properties and very good adhesion. They have high colorfastness, even at elevated temperatures. It is also stable against shear forces. verkürzen | |
| Baybond® XP 2728 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® XP 2728 is an anionic/non-ionic polycarbonate-polyether urethane polymer that is used as the film-forming component in glass fiber sizes. This product has a non-volatile content (1g / 1h / 125°C) of 58 - 62, a flow time at 23°C, (4mmcup) of < 90,...weiterlesen Baybond® XP 2728 is an anionic/non-ionic polycarbonate-polyether urethane polymer that is used as the film-forming component in glass fiber sizes. This product has a non-volatile content (1g / 1h / 125°C) of 58 - 62, a flow time at 23°C, (4mmcup) of < 90, and a pH value of 7-9. Baybond® XP 2728 was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XP 2728 are characterized by their outstanding film-forming properties and very good adhesion. The product exhibits outstanding hydrolysis resistance and colorfastness, and is also very stable against shear forces. verkürzen | |
| Bayhydrol® A 2058 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2058 is an aqueous hydroxyfunctional polyacrylic dispersion used in the formulation of flexible two-component polyurethane top coats and primers for plastics. This product has a non-volatile content (1g / 1h / 125°C / convection oven) of 41 -...weiterlesen Bayhydrol® A 2058 is an aqueous hydroxyfunctional polyacrylic dispersion used in the formulation of flexible two-component polyurethane top coats and primers for plastics. This product has a non-volatile content (1g / 1h / 125°C / convection oven) of 41 - 45, a pH (1:3 in demineralised water) of 7.5 - 9.5, and a viscosity at 23°C, (approx.D=82s-1) of 200 - 2,000. Bayhydrol® A 2058 combined with Bayhydur 3100 yields high-gloss flexible top coats which are resistant to solvents. The formulation can be applied as a one-coat system on many substrates and has good adhesion and body. Two-pack primers can be formulated by combining Bayhydrol® A 2058 with Bayhydur® 3100. These are highly suitable for use on thermoplastics and thermosets and are characterised by excellent adhesion, sandability and water resistance. verkürzen | |
| Bayhydrol® A 2139/2 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2139/2 is an aqueous, fatty acid-modified, hydroxyfunctional polyester/polyacrylate copolymer that can be used in the formulation of two-component polyurethane top coats and primers for plastics. This product has a non-volatile content (1g / ...weiterlesen Bayhydrol® A 2139/2 is an aqueous, fatty acid-modified, hydroxyfunctional polyester/polyacrylate copolymer that can be used in the formulation of two-component polyurethane top coats and primers for plastics. This product has a non-volatile content (1g / 1h / 125°C/convection oven) of 45-49, a viscosity at 23°C, (D = approx. 40 s-1) of 1,000 - 2,500, an acid value of 11.5 - 14.5, and a pH (1:4 in demineralised water) value of 6.8 - 7.9. Bayhydrol® A 2139/2 can be combined with Bayhydur® 3100 to yield highgloss solvent-resistant top coats. It is used as a one-coat top coat on many substrates, it has good adhesion and high body. When combined, it can also be used to formulate two-component primers for many thermoplastics and thermosets. verkürzen | |
| Bayhydrol® A 2227/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2227/1 is a polyester-polyacrylate dispersion used in the formulation of stoving industrial coatings with high whiteness retention on exposure to high temperatures. It can also be used in the formulation of stoving industrial coatings with hi...weiterlesen Bayhydrol® A 2227/1 is a polyester-polyacrylate dispersion used in the formulation of stoving industrial coatings with high whiteness retention on exposure to high temperatures. It can also be used in the formulation of stoving industrial coatings with high whiteness retention on exposure to high temperatures. This product has a non-volatile content (1g / 1h / 125°C / convection oven) of 41-43, a viscosity at 23°C, (D = approx. 40 s-1) of 700 - 2,500, an acid value of 7-10, and a pH (1:3 in demineralised water) of 7,5 - 8,5. Bayhydrol® A 2227/1 is characterised by its good pigment wetting properties and high shear stability. Bead and sand mills have proved suitable as grinding equipment. Grinding temperatures of up to approx. 50°C have no detrimental effect on quality of the coating. Given the many different pigments available, the storage stability should always be tested. The rutile titanium dioxide pigments of the Tronox range, especially Tronox® R-KB-4, are particularly suitable. verkürzen | |
| Bayhydrol® A 2290 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2290 is an aqueous hydroxyfunctional polyester polyacrylate dispersion that can be used in the formulation of two-component polyurethane topcoats and primers for plastics. This product has a non-volatile content (1g / 1h / 125°C, convection o...weiterlesen Bayhydrol® A 2290 is an aqueous hydroxyfunctional polyester polyacrylate dispersion that can be used in the formulation of two-component polyurethane topcoats and primers for plastics. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 43-47, a viscosity at 23°C, D=approx.40s-1 of 200-2,000, and an acid value of 11-13. Bayhydrol® A 2290 is a polyester polyacrylate dispersion which has already been neutralized with dimethylethanolamine. It has good hydrolysis stability and can be thinned with water for application. It is preferably combined with Bayhydur® 3100, Bayhydrol® A 2290 can be used to formulate high gloss, solvent-resistant and tar-resistant top-coats. On many substrates, good adhesion with a good build can be achieved when the formulation is applied as a one-coat finish. verkürzen | |
| Bayhydrol® A 2427 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2427 is an aqueous, hydroxyfunctional polyacrylate dispersion used in the formulation of fast-drying, waterborne two-component polyurethane primers and topcoats, as well as one-component coatings. This product has a non-volatile content (1 g/...weiterlesen Bayhydrol® A 2427 is an aqueous, hydroxyfunctional polyacrylate dispersion used in the formulation of fast-drying, waterborne two-component polyurethane primers and topcoats, as well as one-component coatings. This product has a non-volatile content (1 g/1 h/125°C, convection oven) of 41-44, a viscosity at 23°C, (D=ca.40s-1) of max. 100, and a pH (1:3 in demineralised water) of 8-9. Bayhydrol® A 2427 is preferably combined with anionic hydrophilically modified polyisocyanates such as Bayhydur® XP 2487/1 to formulate transparent and pigmented primers and topcoats. Topcoats based on Bayhydrol® A 2427 and Bayhydur® XP 2487/1 are characterized by their good chemical resistance properties, especially their resistance to discoloring liquids. verkürzen | |
| Bayhydrol® A 2457 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2457 is an anionic polyacrylic dispersion used as a binder in the formulation of water-reducible two-component coatings and sealers for mineral substrates and reactive resins (EP, PU). This product has a non-volatile content (1g / 1h / 125°C ...weiterlesen Bayhydrol® A 2457 is an anionic polyacrylic dispersion used as a binder in the formulation of water-reducible two-component coatings and sealers for mineral substrates and reactive resins (EP, PU). This product has a non-volatile content (1g / 1h / 125°C / convection oven) of 38.5 - 41.5, a viscosity at 23°C, D=approx.42s-1 of max. 100, and a pH (1:3 in demineralised water) value of 7.5-9. Due to its outstanding mechanical and chemical resistance properties the product is ideally suited for the formulation of sealers for mineral substrates and reactive resins (EP, PU). In combination with other water-reducible binders, the many potential combination products, compatibility must always be tested. verkürzen | |
| Bayhydrol® A 2470 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2470 is an aqueous hydroxyfunctional polyacrylic dispersion that has waterborne 2K-Polyurethane varnishes in combination with aliphatic Polyisocyanates. This product has a viscosity at 23°C, D=approx.40s-1 of 1,500 - 3,000, a non-volatile con...weiterlesen Bayhydrol® A 2470 is an aqueous hydroxyfunctional polyacrylic dispersion that has waterborne 2K-Polyurethane varnishes in combination with aliphatic Polyisocyanates. This product has a viscosity at 23°C, D=approx.40s-1 of 1,500 - 3,000, a non-volatile content (1g / 1h / 125°C / convection oven) of 44-47, and a pH (1:4 in demineralised water) value of 7-8. Bayhydrol® A 2470 is a hydroxyfunctional polyacrylic dispersion which can be thinned with water to application viscosity. The viscosity of the product is largely governed by the pH. As the pH may decrease during storage, a decrease in viscosity is also to be expected. The viscosity can be restored to its original value by the addition of small amounts of an aqueous 10% solution of dimethyl ethanol amine. verkürzen | |
| Bayhydrol® A 2620 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2620 is a water-reducible, hydroxyfunctional polyacrylic dispersion used in combination with aliphatic polyisocyanates for the formulation of high grade, fast drying, waterborne two-component clearcoats and top-coats, e.g. for automotive and ...weiterlesen Bayhydrol® A 2620 is a water-reducible, hydroxyfunctional polyacrylic dispersion used in combination with aliphatic polyisocyanates for the formulation of high grade, fast drying, waterborne two-component clearcoats and top-coats, e.g. for automotive and industrial coating applications. This product has an acid number of approx. 9.8, a hydroxyl content (solvent free, calculated) of approx. 3.0, and a density at 20°C of approx. 1,07. Bayhydrol® A 2620 can be used in combination with aliphatic polyisocyanates for the formulation of high-gloss clearcoats and top-coats which can be dried at room temperature or force-dried, e.g. at 130°C. The cured paint films are hard but flexible, with good resistance to solvents, water and chemicals and also exhibit good UV stability. verkürzen | |
| Bayhydrol® A 2646 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2646 is an anionic polyacrylate dispersion used in waterborne, low VOC two-component polyurethane coatings in combination with aliphatic polyisocyanates. This product has a hydroxyl content, (calculated on solid) of approx. 3.8, a hydroxyl co...weiterlesen Bayhydrol® A 2646 is an anionic polyacrylate dispersion used in waterborne, low VOC two-component polyurethane coatings in combination with aliphatic polyisocyanates. This product has a hydroxyl content, (calculated on solid) of approx. 3.8, a hydroxyl content, (supply form) of approx. 2.7, and a density at 20°C of approx. 1.06. On account of its outstanding mechanical and chemical resistance, the product is particularly suitable for the formulation of hard, high-gloss sealers for mineral substrates and reactive resins (EP, PUR). Furthermore, good accentuation of the grain of the substrate (e.g. colored coatings) is achieved. The binder can also be used for the formulation of high-grade low VOC coatings for use on substrates such as wood, metal, plastic, etc. verkürzen | |
| Bayhydrol® A XP 2469 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A XP 2469 is an aqueous hydroxyfunctional polyacrylic dispersion that is in combination with aliphatic polyisocyanates to formulate aqueous two-component clear and top coats for general industrial finishes. This product has a hydroxyl content (...weiterlesen Bayhydrol® A XP 2469 is an aqueous hydroxyfunctional polyacrylic dispersion that is in combination with aliphatic polyisocyanates to formulate aqueous two-component clear and top coats for general industrial finishes. This product has a hydroxyl content (calculated on solid resin) of approx. 2.5, an acid value of approx. 8, a flash point that is not flammable up to boiling point, and a density at 20°C of approx. 1.06. Bayhydrol® A XP 2469 has good pigment wetting properties and high shear stability. Bead mills have proved suitable as grinding equipment. Only pigments and extenders with a minimum water-soluble content should be used. Given the many pigments and extenders available, compatibility testing should always be carried out. verkürzen | |
| Bayhydrol® A XP 2695 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A XP 2695 is an aqueous hydroxyfunctional polyacrylic dispersion that shows a superior chemical resistance, which can be improved by increasing the NCO/OH ratio. This product has an equivalent weight of approx. 830, a flash point (No flash poin...weiterlesen Bayhydrol® A XP 2695 is an aqueous hydroxyfunctional polyacrylic dispersion that shows a superior chemical resistance, which can be improved by increasing the NCO/OH ratio. This product has an equivalent weight of approx. 830, a flash point (No flash point up to initial boiling point) of > 95, and a density at 20°C of approx. 1.06. This product is mainly for air and forced drying coating systems with a very high chemical resistance. The cured paint films are hard, tough but flexible, glossy and high-bodied with good weather stability, lightfastness and superior chemical resistance. The application of a clearcoat based on Bayhydrol® A XP 2695 directly on wood may lead to discoloration. verkürzen | |
| Bayhydrol® U XP 2698 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U XP 2698 liphatic, hydroxyfunctional polyester-polyurethane dispersion used as a binder for the formulation of water-reducible soft-touch coatings. This product has an acid number of approx. 8.5, a density at 20°C of approx. 1.07, and an OH co...weiterlesen Bayhydrol® U XP 2698 liphatic, hydroxyfunctional polyester-polyurethane dispersion used as a binder for the formulation of water-reducible soft-touch coatings. This product has an acid number of approx. 8.5, a density at 20°C of approx. 1.07, and an OH content of approx. 0.8. Bayhydrol® U XP 2698 can be used in combination with flexible polyurethane dispersions, e.g. Bayhydrol® UH 340/1, UH 650, UH 2305, UH XP 2658 and UH XP 2660 to formulate soft-touch and suede-effect coatings. The suitable polyisocyanate components are Bayhydur® 304, 3100, XP 2655 and also Desmodur® N 3600 and N 3900. verkürzen | |
| Bayhydrol® UH 2305 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2305 is an aliphatic, anionic/non-ionic polyester-polyurethane dispersion that is a shear-stable combination binder used in the formulation of flexible two-component polyurethane top coats with pleasant handle, e.g. soft-feel systems. This p...weiterlesen Bayhydrol® UH 2305 is an aliphatic, anionic/non-ionic polyester-polyurethane dispersion that is a shear-stable combination binder used in the formulation of flexible two-component polyurethane top coats with pleasant handle, e.g. soft-feel systems. This product has an efflux time at 23°C, (4mmcup) of 11-18, a non-volatile content (1g / 1h / 125°C) of 39-41, and a pH value of 6.5-8.5. Bayhydrol® UH 2305 can be used as a combination binder with hydroxy-functional resins, primarily Bayhydrol® U XP 2428, in the formulation of highly flexible two-component polyurethane top coats, e.g. soft-feel systems. After crosslinking with, for example, Bayhydur® 3100, force-drying (e.g. 30 - 45 min at 80 °C) yields films with a pleasant handle and good resistance to abrasion and water. verkürzen | |
| Bayhydrol® UH 2952/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2952/1 is an aliphatic polyurethane resin dispersion used as a binder for waterborne, air- and oven-drying basecoats in two-layer systems for automotive coatings, coatings for plastics, automotive refinishing coatings and industrial coatings...weiterlesen Bayhydrol® UH 2952/1 is an aliphatic polyurethane resin dispersion used as a binder for waterborne, air- and oven-drying basecoats in two-layer systems for automotive coatings, coatings for plastics, automotive refinishing coatings and industrial coatings. This product has an Efflux time at 23°C, (4mmcup) of 10-30, a non-volatile content (1g / 1h / 125°C) of 39-41, and a pH value of 6.5-7.5. When used in two-layer systems with TSA and two-component polyurethane clearcoats, metallic basecoats formulated with Bayhydrol® UH 2952/1 are characterized by even, cloud-free films with a very good metallic effect, excellent gloss and good water resistance. Since it adheres to OEM finishes without prior sanding, the metallic basecoat can also be used for online retouching (45 min at 80°C). The metallic basecoat can be oversprayed with TSA or two-component polyurethane clearcoats after pre-drying e.g. for 5 minutes at an oven temperature of 80°C or for 15 minutes at room temperature. verkürzen | |
| Bayhydrol® UH XP 2592 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH XP 2592 is a Polyester-Polyurethane dispersion which dries by oxidation. It can be used as a binder in the formulation of aqueous air- and forced-drying, high-gloss coatings and primers with very good anti-corrosion properties. Mainly used f...weiterlesen Bayhydrol® UH XP 2592 is a Polyester-Polyurethane dispersion which dries by oxidation. It can be used as a binder in the formulation of aqueous air- and forced-drying, high-gloss coatings and primers with very good anti-corrosion properties. Mainly used for general industrial finishes. This product has an acid value of approx. 12, a viscosity at 23°C, (D=approx.40s-1) of approx. 300, a non-volatile content (1g / 1h / 125°C) of approx. 45, and a pH (1:4 in demineralised water) of approx. 7.2. Bayhydrol® UH XP 2592 does not contain any cosolvents, no anti skinning agents and no driers and is therefore label-free. Coatings based on this resin show a quick drying and after drying a quite high hardness. After curing over night a very good water-resistance is achievable. High-gloss coatings, however, need a certain amount of suitable co-solvents and additional amine in the formulation. Bayhydrol® UH XP 2592 can be used as universal resin for high-gloss top coats, effect coats and - due to its excellent anti-corrosion properties – as raw material for primers and single coats. verkürzen | |
| Bayhydrol® UH XP 2660 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH XP 2660 is an aliphatic polyester-polyurethane dispersion that is cosolvent-free. It is a combination binder for the formulation of water-reducible soft-feel coatings. This product has an Efflux time at 23°C, (4mmcup) of 10-30, a non-volati...weiterlesen Bayhydrol® UH XP 2660 is an aliphatic polyester-polyurethane dispersion that is cosolvent-free. It is a combination binder for the formulation of water-reducible soft-feel coatings. This product has an Efflux time at 23°C, (4mmcup) of 10-30, a non-volatile content (1g / 1h / 125°C) of 39-41, and a pH (10% in water) of 6-8. Bayhydrol® UH XP 2660 can be used as a binder in combination with hydrofunctional resins, preferably Bayhydrol® U 355 or U 475, in the formulation of highly flexible two-component polyurethane topcoats (e.g. in soft-touch coating systems). When crosslinking with e.g. Bayhydur® 3100, force drying (e.g. 30-45 min at 80°C) yields films with good surface handle, very good resistance to solvents and very good hydrolytic stability. verkürzen | |
| Baymedix® CD102 | Covestro (formerly Bayer MaterialScience) 科思创 | Baymedix® CD102 is an aqueous polyurethane dispersion. | |
| Baymedix® CD104 | Covestro (formerly Bayer MaterialScience) 科思创 | Baymedix® CD104 is an aqueous polyurethane dispersion. | |
| Baymedix® FD103 | Covestro (formerly Bayer MaterialScience) 科思创 | Baymedix® FD103 is an aqueous polyurethane dispersion. | |
| Dispercoll® U 58 | Covestro (formerly Bayer MaterialScience) 科思创 | Dispercoll® U 58 is a waterborne dispersion of an anionically modified polyurethane. It is an adhesives raw material for the formulation of adhesives for use in e.g. the shoe, furniture or automotive industries. Its characteristic polymer properties make ...weiterlesen Dispercoll® U 58 is a waterborne dispersion of an anionically modified polyurethane. It is an adhesives raw material for the formulation of adhesives for use in e.g. the shoe, furniture or automotive industries. Its characteristic polymer properties make Dispercoll® U 58 particularly well suited for heat activated bonding applications with high tack and good initial heat resistance. verkürzen | |
| Dispurez® 103 | Incorez Ltd. | Dispurez® 103 is a flexible, toughened polyurethane dispersion that forms films with excellent optical clarity and good chemical and block resistance. Upon application, the water evaporates to yield a tough and flexible transparent film. Films derived fro...weiterlesen Dispurez® 103 is a flexible, toughened polyurethane dispersion that forms films with excellent optical clarity and good chemical and block resistance. Upon application, the water evaporates to yield a tough and flexible transparent film. Films derived from Dispurez® 103 exhibit good chemical, stain and hydrolysis resistance, making them a suitable non-hazardous foundation for durable rigid plastics, flexible films and waterproofing applications. verkürzen | |
| GENOMER* 4383/W | Rahn AG | GENOMER* 4383/W is an aliphatic, physically drying polyurethane dispersion. This resin is recommended for radically curable inks, coatings, and adhesives. It is sandable after physical drying, low-odor, and has good abrasion resistance, adhesion on wood, ...weiterlesen GENOMER* 4383/W is an aliphatic, physically drying polyurethane dispersion. This resin is recommended for radically curable inks, coatings, and adhesives. It is sandable after physical drying, low-odor, and has good abrasion resistance, adhesion on wood, and good solvent resistance. This product may be cross-linked by used of UV-irradiation with a suitable initiator. GENOMER* 4383/W is recommended for wood and industrial coatings. verkürzen | Request Sample |
| Unithane IC-100 | Union Specialties, Inc. | Unithane IC-100 is a NMP containing, medium hard, high gloss, APEO free, water-based polyurethane dispersion. This product has a gloss at 60° of 85 and a viscosity at 25°C of 100 cps. It is often used in a formulated topcoat for wood, metal, flooring, ink...weiterlesen Unithane IC-100 is a NMP containing, medium hard, high gloss, APEO free, water-based polyurethane dispersion. This product has a gloss at 60° of 85 and a viscosity at 25°C of 100 cps. It is often used in a formulated topcoat for wood, metal, flooring, inks, adhesives, and graphic arts. verkürzen | |
| Unithane IC-400 | Union Specialties, Inc. | Unithane IC-400 is a NMP containing, medium soft, high gloss, APEO free, water-based polyurethane dispersion with fast drying, flexibility, and automotive grade properties. This product has a gloss at 60° of 86 and a viscosity at 25°C of 50cps. It is suit...weiterlesen Unithane IC-400 is a NMP containing, medium soft, high gloss, APEO free, water-based polyurethane dispersion with fast drying, flexibility, and automotive grade properties. This product has a gloss at 60° of 86 and a viscosity at 25°C of 50cps. It is suitable for use in a formulated coating or sealer coat for wood, paint, inks, adhesives, and graphic arts. verkürzen | |
| Unithane IC-501 | Union Specialties, Inc. | Unithane IC-501 is a NMP containing, medium soft, high gloss, APEO free, water-based polyurethane dispersion that has adhesion and tack-free properties. This product has a gloss at 60º of 85 and a viscosity at 25°C of 100cps. It is designed for use in a f...weiterlesen Unithane IC-501 is a NMP containing, medium soft, high gloss, APEO free, water-based polyurethane dispersion that has adhesion and tack-free properties. This product has a gloss at 60º of 85 and a viscosity at 25°C of 100cps. It is designed for use in a formulated primer coat for paints, graphic arts, adhesives, and primers. verkürzen | |
| Unithane IC-505 | Union Specialties, Inc. | Unithane IC-505 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 1-500cps. It i...weiterlesen Unithane IC-505 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 1-500cps. It is suitable for use in a formulated primer coat for concrete, automotive, metal, graphic arts, and adhesives. verkürzen | |
| Unithane IC-551 NF | Union Specialties, Inc. | Unithane IC-551 NF is an anionic NMP free and APEO free dispersion that provides good gloss, flexibility, and adhesion properties. This product has a gloss at 60º of 86 and a viscosity at 25°C of 150cps. It is often designed for industrial coatings, inter...weiterlesen Unithane IC-551 NF is an anionic NMP free and APEO free dispersion that provides good gloss, flexibility, and adhesion properties. This product has a gloss at 60º of 86 and a viscosity at 25°C of 150cps. It is often designed for industrial coatings, interior coatings, paints, graphic arts, adhesives and primers. verkürzen | |
| Unithane IC-555 NF | Union Specialties, Inc. | Unithane IC-555 NF is a NMP Free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with good adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 1-500cps. It is ...weiterlesen Unithane IC-555 NF is a NMP Free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with good adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 1-500cps. It is often designed for use in a formulated primer coat for concrete, graphic arts, adhesives, primers, and automotive coatings. verkürzen | |
| Unithane IC-603 | Union Specialties, Inc. | Unithane IC-603 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has coverage and flexibility properties. This product has a gloss at 60º of 88 and a viscosity at 25°C of 100cps. It is often designed for ...weiterlesen Unithane IC-603 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has coverage and flexibility properties. This product has a gloss at 60º of 88 and a viscosity at 25°C of 100cps. It is often designed for use in a formulated basecoat for textiles, interior and exterior coatings, adhesives, and paints. verkürzen | |
| Unithane IC-652 NF | Union Specialties, Inc. | Unithane IC-652 NF is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has good coverage and flexibility properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 100cps. It is often designed fo...weiterlesen Unithane IC-652 NF is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has good coverage and flexibility properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 100cps. It is often designed for use in a formulated basecoat for textiles, adhesives, graphic arts, and interior coatings. verkürzen | |
| Unithane IC-653 NF | Union Specialties, Inc. | Unithane IC-653 NF is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has good coverage and flexibility properties. This product has a gloss at 60º of 87 and a viscosity at 25°C of 10-200cps. It is often designed...weiterlesen Unithane IC-653 NF is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has good coverage and flexibility properties. This product has a gloss at 60º of 87 and a viscosity at 25°C of 10-200cps. It is often designed for use in a formulated basecoat for textiles, adhesives, and interior coatings. verkürzen | |
| Unithane IC-803 | Union Specialties, Inc. | Unithane IC-803 is a NMP containing, uniquely soft, low VOC, medium gloss, APEO free, water-based polyurethane dispersion that has a soft feel, flexibility, and automotive grade properties. This product has a gloss at 60º of 80 and a viscosity at 25°C of ...weiterlesen Unithane IC-803 is a NMP containing, uniquely soft, low VOC, medium gloss, APEO free, water-based polyurethane dispersion that has a soft feel, flexibility, and automotive grade properties. This product has a gloss at 60º of 80 and a viscosity at 25°C of 150cps. It is suitable for use in a formulated coating for graphic arts, metal, automotive, paints, and adhesives. verkürzen | |
| Unithane IC-807 SF | Union Specialties, Inc. | Unithane IC-807 SF is a solvent free, medium soft, high gloss, APEO free, water-based polyurethane dispersion that has additive compatibility and flexibility properties. This product has a gloss at 60º of 88 and a viscosity at 25°C of 150 cps. It is devel...weiterlesen Unithane IC-807 SF is a solvent free, medium soft, high gloss, APEO free, water-based polyurethane dispersion that has additive compatibility and flexibility properties. This product has a gloss at 60º of 88 and a viscosity at 25°C of 150 cps. It is developed for use in a formulated coating for graphic arts, concrete, paint, automotive, inks, and adhesives. verkürzen | |
| Unithane IC-850 NF | Union Specialties, Inc. | Unithane IC-850 NF is a NMP free, uniquely soft, low VOC, medium gloss, APEO free, water-based polyurethane dispersion that has soft feel, flexibility, and automotive grade properties. This product has a gloss at 60º of 88 and a viscosity at 25°C of 150cp...weiterlesen Unithane IC-850 NF is a NMP free, uniquely soft, low VOC, medium gloss, APEO free, water-based polyurethane dispersion that has soft feel, flexibility, and automotive grade properties. This product has a gloss at 60º of 88 and a viscosity at 25°C of 150cps. It is designed for use in a formulated coating for graphic arts, metal, adhesives, automotive, and paints. verkürzen | |
| Unithane IC-901 | Union Specialties, Inc. | Unithane IC-901 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with good adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 75 and a viscosity at 25°C of 10-200cps. It...weiterlesen Unithane IC-901 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with good adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 75 and a viscosity at 25°C of 10-200cps. It is suitable for use in a formulated primer coat for concrete, graphic arts, adhesives, and exterior coatings. verkürzen | |
| Unithane IC-950 NF | Union Specialties, Inc. | Unithane IC-950 NF is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with exceptional adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 80 and a viscosity at 25°C of 10-500cps...weiterlesen Unithane IC-950 NF is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with exceptional adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 80 and a viscosity at 25°C of 10-500cps. It is specifically designed for use in a formulated primer coat for concrete, graphic arts, automotive, metal, adhesives, and paints. verkürzen | |
| Unithane IC-953 CP | Union Specialties, Inc. | Unithane IC-953 CP is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has extremely good adhesion to concrete properties. This product has a gloss at 60º of 75 and a viscosity at 25°C of 50-500cps. It is designed...weiterlesen Unithane IC-953 CP is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has extremely good adhesion to concrete properties. This product has a gloss at 60º of 75 and a viscosity at 25°C of 50-500cps. It is designed for use in a formulated primer coat for concrete, automotive, metal, graphic arts, adhesives, and flooring coatings. verkürzen | |
| Unithane SX-487 SF | Union Specialties, Inc. | Unithane SX-487 SF is a self-crosslinking, solvent free, medium hard, high gloss, APEO free, water-based polyurethane dispersion that has good chemical and abrasion resistance properties. This product has a gloss at 60º of 89 and a viscosity at 25°C of 10...weiterlesen Unithane SX-487 SF is a self-crosslinking, solvent free, medium hard, high gloss, APEO free, water-based polyurethane dispersion that has good chemical and abrasion resistance properties. This product has a gloss at 60º of 89 and a viscosity at 25°C of 100cps. It is designed for use in a formulated coating for graphic arts, wood, adhesives, and paints. verkürzen |
