APG® 325 UP | BASF |
|
APG® 325 UP is a nonionic alkyl polyglycoside surfactant that provides superior performance by combining the formulation ease of typical nonionic with the foam characteristics as anionics. APG® 325 UP is unpreserved and carries the Safer Choice designati...weiterlesen
APG® 325 UP is a nonionic alkyl polyglycoside surfactant that provides superior performance by combining the formulation ease of typical nonionic with the foam characteristics as anionics. APG® 325 UP is unpreserved and carries the Safer Choice designation. It provides excellent detergency and stability benefits in a variety of cleaning products. This product exhibits superior wetting, dispersing, and interfacial tension reduction properties for increased soil removal, especially on hard surfaces.
APG® 325 UP is highly soluble in concentrated electrolyte and will hydrotrope other less soluble ingredients. In addition to these unique performance characteristics, APG® 325 UP alkyl polyglucoside surfactant is made from glucose derived from corn and fatty alcohol, it is mild and readily biodegradable. verkürzen
Compliance Highlights Available
|
|
Arlypon® VPC | BASF |
Arlypon® VPC is a blend of ethoxylated fatty alcohols and ethoxylated fatty amines that is a clear liquid at 25°C. Thickens hydrochloric, phosphoric, citric, sulphamic, etc. acid solutions.
Compliance Highlights Unavailable
|
||
Degressal® SD 20 | BASF |
Degressal® SD 20 is a fatty alcohol alkoxylate with approximately 100% active content. It is very suitable for silicon-free foam suppressors for Home Care detergents and I&I cleaning. This product is supplied as a clear, yellowish liquid.
Compliance Highlights Unavailable
|
||
Degressal® SD 40 | BASF |
Degressal® SD 40 is a phosphoric ester with approximately 100% active content. It is very suitable for silicon-free foam suppressors for Home Care detergents and I&I cleaning. This product is supplied as a clear, colourless, or yellowish liquid.
Compliance Highlights Unavailable
|
||
Dehydem® Supra | BASF |
Dehydem® Supra is an alkyl polyalkylene glycol ether with approximately 90% active content. It is your professional partner for a multitude of I&I cleaning tasks. This product provides smart and effective foam control even at low temperatures while provid...weiterlesen
Dehydem® Supra is an alkyl polyalkylene glycol ether with approximately 90% active content. It is your professional partner for a multitude of I&I cleaning tasks. This product provides smart and effective foam control even at low temperatures while providing visible cleaning benefits. Because it is easy to formulate in water-based solutions, Dehydem® Supra provides versatility for a wide range of formulations. verkürzen
Compliance Highlights Unavailable
|
||
Dehydol® LT 7 | BASF |
Dehydol® LT 7 is a fatty alcohol that is a raw material for the manufacture of liquid wool and light-duty detergents.
Compliance Highlights Available
|
||
Dehydol® LT 8 | BASF |
Dehydol® LT 8 is a fatty alcohol C12-C18 with approximately 8 moles EO used in cosmetic applications.
Compliance Highlights Available
|
||
Dehypon® 2555 | BASF |
Dehypon® 2555 is a surfactant blend with high anti-foaming effect which is soluble in 50% sodium hydroxide - in the presence of complexing agents such as gluconate.
Compliance Highlights Unavailable
|
||
Dehypon® 2574 | BASF |
Dehypon® 2574 is a nonionic surfactant with a very effective foam suppressing behavior in formulations for spray and dip cleaning in metal treatment.
Compliance Highlights Unavailable
|
||
Dehypon® E 124-90 | BASF |
Dehypon® E 124-90 is a nonionic surfactant with a distinct low-foaming behavior and excellent wetting properties. Main application is the use in rinse aids for household and institutional areas.
Compliance Highlights Unavailable
|
||
Dehypon® E 127 | BASF |
Dehypon® E 127 is a modified fatty alcohol polyglycol ether.
Compliance Highlights Unavailable
|
||
Dehypon® G 2084 | BASF |
Dehypon® G 2084 is a low foaming surfactant component that is used in various industrial cleaners.
Compliance Highlights Available
|
||
Dehypon® GRA | BASF |
Dehypon® GRA is a granular low foaming surface active product with an excellent wetting behavior. Because of its product properties it is mainly used as rinse aid additive in multifunctional autodish powders or tablets (combining cleaner, salt and rinse a...weiterlesen
Dehypon® GRA is a granular low foaming surface active product with an excellent wetting behavior. Because of its product properties it is mainly used as rinse aid additive in multifunctional autodish powders or tablets (combining cleaner, salt and rinse aid functions in one product). verkürzen
Compliance Highlights Unavailable
|
||
Dehypon® GRA | BASF |
Dehypon® GRA is a granular low foaming surface active product with an excellent wetting behavior. Because of its product properties, it is mainly used as rinse aid additive in multifunctional autodish powders or tablets.
Compliance Highlights Unavailable
|
||
Dehypon® KE 3447 | BASF |
Dehypon® KE 3447 is a nonionic surfactant with a distinct low foaming behavior and excellent wetting properties. It can be used to improve wetting ability on hard surfaces and can be used in cleaners.
Compliance Highlights Unavailable
|
||
Dehypon® LS 104 | BASF |
Dehypon® LS 104 is a low-foaming surfactant with a well-developed wetting power. With regard to caustic solutions and acids, it has a very good stability. The product is miscible with all anionic, cationic, and nonionic surfactants.
Compliance Highlights Available
|
||
Dehypon® LS 104 L | BASF |
Dehypon® LS 104 L is a low foaming surfactant with a well developed wetting power. It is suitable for use in acidic and neutral clear rinsing agent formulations.
Compliance Highlights Available
|
||
Dehypon® LS 24 | BASF |
Dehypon® LS 24 is a low foaming fatty alcohol - EO/PO derivative used for detergents and cleaners in which foaming has to be kept to a minimum.
Compliance Highlights Available
|
||
Dehypon® LS 36 | BASF |
Dehypon® LS 36 is a low foaming fatty alcohol - EO/PO derivative used for detergents and cleaners in which foaming has to be kept to a minimum.
Compliance Highlights Available
|
||
Dehypon® LS 45 CC | BASF |
Dehypon® LS 45 CC is a low foaming nonionic surfactant with a sufficient stability in alkaline media (e.g. carbonates, silicates, phosphates) and acidic media (e.g. phosphoric acid, citric acid).
Compliance Highlights Available
|
||
Dehypon® LS 531 | BASF |
Dehypon® LS 531 is a low foaming surfactant intended for domestic, industrial and institutional cleaners. It provides effective foam reduction, and high wetting power.
Compliance Highlights Available
|
||
Dehypon® LS 54 | BASF |
Dehypon® LS 54 is a low foaming fatty alcohol - EO/PO derivative.
Compliance Highlights Available
|
||
Dehypon® LST 254 | BASF |
Dehypon® LST 254 is a low foaming, nonionic surfactant which can be used to inhibit foam formation. It is particularly suited for use as a defoamer for the beginning cycle of bottle cleaning.
Compliance Highlights Unavailable
|
||
Dehypon® LT 054 | BASF |
Dehypon® LT 054 is a nonionic, low foaming surfactant suited for powder formulations based on caustic soda.
Compliance Highlights Available
|
||
Dehypon® LT 104 | BASF |
Dehypon® LT 104 is a low foaming surfactant that has a marked wetting power. It can be used in low foaming industrial cleaners, machine-dishwashing agents, as well as in formulations based on sodium hydroxide or phosphoric acid where conventional fatty al...weiterlesen
Dehypon® LT 104 is a low foaming surfactant that has a marked wetting power. It can be used in low foaming industrial cleaners, machine-dishwashing agents, as well as in formulations based on sodium hydroxide or phosphoric acid where conventional fatty alcohol polyglycol ethers are not sufficiently stable during storage. verkürzen
Compliance Highlights Available
|
||
Dehypon® LT 104 L | BASF |
Dehypon® LT 104 L is a low foaming surfactant with a well developed wetting power.
Compliance Highlights Available
|
||
Dehypon® O 054 | BASF |
Dehypon® O 054 is a modified fatty alcohol polyglycol ether.
Compliance Highlights Available
|
||
Dehypon® OCP 502 | BASF |
Dehypon® OCP 502 is a defoaming surfactant component that is especially suited for liquid alkaline cleaners.
Compliance Highlights Available
|
||
Dehypon® WET | BASF |
Dehypon® WET is a low foaming surfactant for household and institutional hard surface cleaners.
Compliance Highlights Unavailable
|
||
Dehypound® VTS | BASF |
Dehypound® VTS is a silicone-replacement technology designed for Car Care applications. It is listed on EPA’s Safer Chemical Ingredients List, and is also suitable for Direct Release applications. Compared with silicones, it provides comparable tire shine...weiterlesen
Dehypound® VTS is a silicone-replacement technology designed for Car Care applications. It is listed on EPA’s Safer Chemical Ingredients List, and is also suitable for Direct Release applications. Compared with silicones, it provides comparable tire shine, better streak-free cleaning performance in rinse-aids, and better cleaning performance in interior-cleaning applications. verkürzen
Compliance Highlights Unavailable
|
||
Dehypound® W 07 | BASF |
Dehypound® W 07 is a concentrated compound to be used for the production of pre-moistured wipes which can clean all hard surfaces.
Compliance Highlights Unavailable
|
||
Dehyquart® AU-46 | BASF |
Dehyquart® AU-46 is a quaternary compound that is used as a raw material in softener production.
Compliance Highlights Available
|
||
Dehyquart® CSP | BASF |
Dehyquart® CSP is a special cationic composition for car care applications.
Compliance Highlights Unavailable
|
||
Demelan® 1990 | BASF |
Demelan® 1990 is a mixture of surfactants that is used as an additive in the production of foaming viscous bleach. It provides detergent and foaming properties.
Compliance Highlights Unavailable
|
||
Demelan® AU 39 BIO | BASF |
Demelan® AU 39 BIO is a cationic, readily biodegradable surfactant with excellent degreasing properties.
Compliance Highlights Unavailable
|
||
Demelan® CS-30 - Ready to Use Coconut Soap | BASF |
|
Demelan® CS-30 is a transparent liquid with a very low color. It has good stability in the formulation without yellowing process of the final product after storage. It is a odor free product with good compatibility with all kind of perfumes. It is used...weiterlesen
Demelan® CS-30 is a transparent liquid with a very low color. It has good stability in the formulation without yellowing process of the final product after storage. It is a odor free product with good compatibility with all kind of perfumes. It is used as an additive for detergent in heavy duty and liquid light duty and as viscous foamy bleach. verkürzen
Compliance Highlights Unavailable
|
|
Deriphat® 160 C | BASF |
Deriphat® 160 C is an amphoteric surfactant for cleaners. It exhibits very good foaming power in hard and soft water.
Compliance Highlights Available
|
||
Euperlan® Eco | BASF |
Euperlan® Eco is a 43% biobased† and moderately biodegradable* opacifier. It is a starch polymer with styrene and methacrylic acid. It is a milky, low viscous dispersion at room temperature.
Compliance Highlights Unavailable
|
||
Euperlan® HCO | BASF |
Euperlan® HCO is the Highly Convenient Opacifier: Dispersion of styrene/acrylic copolymer and a nonionic surfactant, unpreserved.
Compliance Highlights Unavailable
|
||
Glucopon® 215 UP | BASF |
|
Glucopon® 215 UP exhibits excellent caustic stability and solubility in caustic and saline solutions. It has excellent solubilizing properties in highly concentrated surfactant solutions as well as in the presence of salt and alkalies.
Compliance Highlights Available
|
|
Glucopon® 225 DK | BASF |
|
Glucopon® 225 DK is a nonionic surfactant that provides superior performance by combining the formulation ease and compatibility of typical nonionics with the solubility and foam characteristics of anionics. Glucopon® 225 DK alkyl polyglycoside surfactant...weiterlesen
Glucopon® 225 DK is a nonionic surfactant that provides superior performance by combining the formulation ease and compatibility of typical nonionics with the solubility and foam characteristics of anionics. Glucopon® 225 DK alkyl polyglycoside surfactant provides excellent hard surface detergency and processing benefits in a variety of cleaning produts. It exhibits very good wetting, dispersing, and surface tension reduction properties for increased soil removal and emulsification. verkürzen
Compliance Highlights Available
|
|
Glucopon® 425 N/HH | BASF |
Glucopon® 425 N/HH is an aqueous solution that provides wetting, penetration and detergency for surface cleaning products.
Compliance Highlights Available
|
||
Glucopon® 50 G | BASF |
Glucopon® 50 G is a granular APG® for the detergent and cleaner market.
Compliance Highlights Unavailable
|
||
Glucopon® 600 CSUP | BASF |
|
Glucopon® 600 CSUP is an aqueous dispersion that exhibits good wetting, cleaning and detergency properties. It is suitable for use in manual dishwashing formulations as well as for the manufacture of laundry detergents and a variety of cleaning products.
Compliance Highlights Available
|
|
Glucopon® 650 EC | BASF |
|
Glucopon® 650 EC is an aqueous solution that provides excellent dishwashing and detergent performance.
Compliance Highlights Available
|
|
Lutensol® TO 10 | BASF |
Lutensol® TO 10 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as ...weiterlesen
Lutensol® TO 10 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 10 is a soft, slightly yellowish paste. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® TO 109 | BASF |
Lutensol® TO 109 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as...weiterlesen
Lutensol® TO 109 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 109 is a clear liquid at 23°C. It consists of approx. 85% Lutensol® TO 10 and approx. 15% water. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® TO 12 | BASF |
Lutensol® TO 12 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as ...weiterlesen
Lutensol® TO 12 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 12 is a soft, slightly yellowish paste. verkürzen
Compliance Highlights Available
|
||
Lutensol® TO 129 | BASF |
Lutensol® TO 129 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as...weiterlesen
Lutensol® TO 129 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 129 is a clear liquid at 23°C. It consists of approx. 85% Lutensol® TO 12 and approx. 15% water. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® TO 15 | BASF |
Lutensol® TO 15 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as ...weiterlesen
Lutensol® TO 15 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 15 is a soft, slightly yellowish paste. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® TO 2 | BASF |
Lutensol® TO 2 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as p...weiterlesen
Lutensol® TO 2 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 2 is a cloudy liquid at 23°C, and it tends to form a sediment. It is clear at 50°C. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® TO 20 | BASF |
Lutensol® TO 20 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as ...weiterlesen
Lutensol® TO 20 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 20 is a soft, slightly yellowish paste. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® TO 3 | BASF |
Lutensol® TO 3 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as p...weiterlesen
Lutensol® TO 3 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 3 is a cloudy liquid at 23°C, and it tends to form a sediment. It is clear at 50°C. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® TO 389 | BASF |
Lutensol® TO 389 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as...weiterlesen
Lutensol® TO 389 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 389 is a clear liquid at 23°C. It is a special mixture of Lutensol® TO 3 and Lutensol® TO 8 with an active content of approx. 90% and approx. 10% water. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® TO 5 | BASF |
Lutensol® TO 5 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as p...weiterlesen
Lutensol® TO 5 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 5 is a cloudy liquid at 23°C, and it tends to form a sediment. It is clear at 50°C. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® TO 6 | BASF |
Lutensol® TO 6 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as p...weiterlesen
Lutensol® TO 6 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 6 is a cloudy liquid at 23°C, and it tends to form a sediment. It is clear at 50°C. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® TO 65 | BASF |
Lutensol® TO 65 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as ...weiterlesen
Lutensol® TO 65 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 65 is a cloudy liquid at 23°C, and it tends to form a sediment. It is clear at 50°C. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® TO 7 | BASF |
Lutensol® TO 7 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as p...weiterlesen
Lutensol® TO 7 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 7 is a cloudy liquid at 23°C, and it tends to form a sediment. It is clear at 50°C. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® TO 79 | BASF |
Lutensol® TO 79 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as ...weiterlesen
Lutensol® TO 79 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 79 is a clear liquid at 23°C. It consists of approx. 90% Lutensol® TO 7 and approx. 10% water. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® TO 8 | BASF |
Lutensol® TO 8 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as p...weiterlesen
Lutensol® TO 8 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 8 is a cloudy liquid at 23°C, and it tends to form a sediment. It is clear at 50°C. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® TO 89 | BASF |
Lutensol® TO 89 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as ...weiterlesen
Lutensol® TO 89 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 89 is a clear liquid at 23°C. It consists of approx. 90% Lutensol® TO 8 and approx. 10% water. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® XL 100 | BASF |
Lutensol® XL 100 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 100 is...weiterlesen
Lutensol® XL 100 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 100 is a soft, colourless or slightly yellowish paste at 23°C. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® XL 140 | BASF |
Lutensol® XL 140 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 140 is...weiterlesen
Lutensol® XL 140 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 140 is a soft, colourless or slightly yellowish paste at 23°C. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® XL 40 | BASF |
Lutensol® XL 40 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 40 is a...weiterlesen
Lutensol® XL 40 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 40 is a clear to cloudy liquid at room temperature, and it tends to form a sediment. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® XL 50 | BASF |
Lutensol® XL 50 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 50 is a...weiterlesen
Lutensol® XL 50 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 50 is a clear to cloudy liquid at room temperature, and it tends to form a sediment. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® XL 60 | BASF |
Lutensol® XL 60 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 60 is a...weiterlesen
Lutensol® XL 60 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 60 is a clear to cloudy liquid at room temperature, and it tends to form a sediment. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® XL 70 | BASF |
Lutensol® XL 70 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 70 is a...weiterlesen
Lutensol® XL 70 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 70 is a clear to cloudy liquid at room temperature, and it tends to form a sediment. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® XL 79 | BASF |
Lutensol® XL 100 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 79 is ...weiterlesen
Lutensol® XL 100 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 79 is a clear liquid at room temperature. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® XL 80 | BASF |
Lutensol® XL 80 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 80 is a...weiterlesen
Lutensol® XL 80 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 80 is a cloudy liquid at room temperature, and it tends to form a sediment. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® XL 89 | BASF |
Lutensol® XL 100 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 89 is ...weiterlesen
Lutensol® XL 100 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 89 is a clear liquid at room temperature. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® XL 90 | BASF |
Lutensol® XL 90 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 90 is a...weiterlesen
Lutensol® XL 90 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 90 is a cloudy liquid at room temperature, and it tends to form a sediment. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® XP 100 | BASF |
Lutensol® XP 100 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The nu...weiterlesen
Lutensol® XP 100 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 100 is a soft, colourless or slightly yellowish paste at 23°C. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® XP 140 | BASF |
Lutensol® XP 140 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The nu...weiterlesen
Lutensol® XP 140 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 140 is a soft, colourless or slightly yellowish paste at 23°C. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® XP 30 | BASF |
Lutensol® XP 30 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...weiterlesen
Lutensol® XP 30 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 30 is a cloudy liquid at room temperature, and it tends to form a sediment. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® XP 40 | BASF |
Lutensol® XP 40 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...weiterlesen
Lutensol® XP 40 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 40 is a cloudy liquid at room temperature, and it tends to form a sediment. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® XP 50 | BASF |
Lutensol® XP 50 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...weiterlesen
Lutensol® XP 50 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 50 is a cloudy liquid at room temperature, and it tends to form a sediment. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® XP 60 | BASF |
Lutensol® XP 60 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...weiterlesen
Lutensol® XP 60 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 60 is a cloudy liquid at room temperature, and it tends to form a sediment. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® XP 69 | BASF |
Lutensol® XP 69 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...weiterlesen
Lutensol® XP 69 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 69 is a clear liquid at room temperature. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® XP 70 | BASF |
Lutensol® XP 70 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...weiterlesen
Lutensol® XP 70 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 70 is a cloudy liquid at room temperature, and it tends to form a sediment. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® XP 79 | BASF |
Lutensol® XP 79 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...weiterlesen
Lutensol® XP 79 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 79 is a clear liquid at room temperature. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® XP 80 | BASF |
Lutensol® XP 80 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...weiterlesen
Lutensol® XP 80 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 80 is a cloudy liquid at room temperature, and it tends to form a sediment. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® XP 89 | BASF |
Lutensol® XP 89 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...weiterlesen
Lutensol® XP 89 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 89 is a clear liquid at room temperature. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® XP 90 | BASF |
Lutensol® XP 90 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...weiterlesen
Lutensol® XP 90 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 90 is a cloudy liquid at room temperature, and it tends to form a sediment. verkürzen
Compliance Highlights Unavailable
|
||
Lutensol® XP 99 | BASF |
Lutensol® XP 99 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...weiterlesen
Lutensol® XP 99 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 99 is a clear liquid at room temperature. verkürzen
Compliance Highlights Unavailable
|
||
Lutropur® MSA | BASF |
Lutropur® MSA is high purity methanesulfonic acid 70% (in water). It provides fast and powerful cleaning, even against greasy soils. It also removes lime scale, calcium deposits, and soap rests, as well as improves rust and grime removal. This product is ...weiterlesen
Lutropur® MSA is high purity methanesulfonic acid 70% (in water). It provides fast and powerful cleaning, even against greasy soils. It also removes lime scale, calcium deposits, and soap rests, as well as improves rust and grime removal. This product is suitable for bathroom cleaners toilet bowl cleaners, shower cleaners, and rust removers. verkürzen
Compliance Highlights Unavailable
|
||
Plurafac® LF 120 | BASF |
Plurafac® LF-120 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 60 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
Plurafac® LF 1300 | BASF |
Plurafac® LF-1300 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 130 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
Plurafac® LF 131 | BASF |
Plurafac® LF-131 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 40 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
Plurafac® LF 132 | BASF |
Plurafac® LF-132 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 5 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
Plurafac® LF 1430 | BASF |
Plurafac® LF-1430 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 450 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
Plurafac® LF 220 | BASF |
Plurafac® LF-220 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 150 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
Plurafac® LF 221 | BASF |
Plurafac® LF-221 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 100 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
Plurafac® LF 223 | BASF |
Plurafac® LF-223 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 70 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
Plurafac® LF 224 | BASF |
Plurafac® LF-224 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 55 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
Plurafac® LF 231 | BASF |
Plurafac® LF-231 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 45 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
Plurafac® LF 300 | BASF |
Plurafac® LF-300 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 75 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
Plurafac® LF 301 | BASF |
Plurafac® LF-301 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 150 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
Plurafac® LF 303 | BASF |
Plurafac® LF-303 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 350 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
Plurafac® LF 305 | BASF |
Plurafac® LF-305 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 110 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
Plurafac® LF 400 | BASF |
Plurafac® LF-400 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 70 mPa·s at 23°C.
Compliance Highlights Unavailable
|