| Benzoin | Eutec Chemical Co., Ltd. | Benzoin is a light yellow crystalline powder with a 99% assay. It is used as an anti-cratering agent for powder coatings and an intermediate for organic synthesis. | |
| BLISTER FREE 56 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 56 is a defoamer and deaerator for water-based coating systems. This clear yellow liquid is silicone free. It is an interfacially active product, which suppresses the inclusion of air and destroys air bubbles before the film dries. Cratering ...weiterlesen BLISTER FREE 56 is a defoamer and deaerator for water-based coating systems. This clear yellow liquid is silicone free. It is an interfacially active product, which suppresses the inclusion of air and destroys air bubbles before the film dries. Cratering is thereby prevented. The film elasticity is improved. BLISTER FREE 56 is suitable in most water-based systems and acts as defoamer, deaerator and to some extend as levelling additive. This product is especially recommended in the following systems: alkyd / acrylic paints, saturated polyesters, epoxydes, and UV coating systems. verkürzen | |
| BYK®-306 | BYK 毕克 | BYK®-306 is a solution of a polyether modified polydimethylsiloxane. This product is a highly effective silicone additive for the wetting of critical substrates. It improves dust and spray dust acceptance. BYK-306 reduces air draft sensitivity in wood and...weiterlesen BYK®-306 is a solution of a polyether modified polydimethylsiloxane. This product is a highly effective silicone additive for the wetting of critical substrates. It improves dust and spray dust acceptance. BYK-306 reduces air draft sensitivity in wood and furniture coatings. It also improves flatting agent orientation. verkürzen | |
| BYK®-313 | BYK 毕克 | BYK®-313 is a solution of a polyester-modified polydimethylsiloxane. is a strong, highly compatible silicone for solvent-borne and baking coating systems with the following properties: strong reduction of surface tension, very good anti-cratering properti...weiterlesen BYK®-313 is a solution of a polyester-modified polydimethylsiloxane. is a strong, highly compatible silicone for solvent-borne and baking coating systems with the following properties: strong reduction of surface tension, very good anti-cratering properties, improves substrate wetting, improves flow and leveling of solvent-borne systems, very effective at low film thickness, increases gloss, strong increase of surface slip, FDA § 175.300 compliant, BYK-313 is a heat-resistant silicone due to the polyester modification, in baking systems, no loss in adhesion and no surface defects occur, no thermal decomposition at temperatures between 150°C and 230°C like polyether-modified silicones do, HAPS and aromatic-free. verkürzen | |
| BYK®-333 | BYK 毕克 | BYK®-333 is a polyether modified polydimethylsiloxane. This product strongly increases surface slip and considerably improves substrate wetting. It can be used universally in all coatings systems. In aqueous systems, it increases anti-blocking properties....weiterlesen BYK®-333 is a polyether modified polydimethylsiloxane. This product strongly increases surface slip and considerably improves substrate wetting. It can be used universally in all coatings systems. In aqueous systems, it increases anti-blocking properties. BYK-333 displays excellent compatibility and can be used as an anti-cratering additive. verkürzen | |
| BYK®-354 | BYK 毕克 | BYK®-354 is a solution of a polyacrylate. These additives improve leveling and gloss. They produce a long wave effect and avoid cratering in the system. These acrylate additives do not negatively influence recoatability or intercoat adhesion. Surface tens...weiterlesen BYK®-354 is a solution of a polyacrylate. These additives improve leveling and gloss. They produce a long wave effect and avoid cratering in the system. These acrylate additives do not negatively influence recoatability or intercoat adhesion. Surface tension is only slightly reduced. These additives are thermally stable. Due to its high molecular weight and its unpolar structure, BYK-354 has both leveling and air release properties. verkürzen | |
| BYK®-3550 | BYK 毕克 | BYK®-3550 is a patented technology of a surface-active additive based on a silicone acrylate copolymer. It leads to a strong reduction of the surface tension of the paint system. Therefore, it improves the substrate wetting and prevents cratering. Dependi...weiterlesen BYK®-3550 is a patented technology of a surface-active additive based on a silicone acrylate copolymer. It leads to a strong reduction of the surface tension of the paint system. Therefore, it improves the substrate wetting and prevents cratering. Depending on the polarity of the system, BYK®-3550 shows different properties. In polar systems the additive shows an excellent compatibility in the coating, which leads to a homogeneous distribution in the film. verkürzen | |
| BYK®-356 | BYK 毕克 | BYK®-356 is an acrylic leveling additive for solvent-borne and solvent-free systems. This polyacrylate is the solvent-free version of BYK-355. | |
| BYK®-356 For Powder | BYK 毕克 | BYK®-356 For Powder anti-crater and leveling additive for the formulation of resin masterbatches for powder coatings. It is a polyacrylate that is the solvent-free version of BYK-355. | |
| BYK®-358 N | BYK 毕克 | BYK®-358 N is a solution of a polyacrylate that can be used as an anti-cratering and leveling additive in all solvent-borne coatings. It increases gloss and gives the coatings a long wave effect. It only causes a minor reduction in surface tension and doe...weiterlesen BYK®-358 N is a solution of a polyacrylate that can be used as an anti-cratering and leveling additive in all solvent-borne coatings. It increases gloss and gives the coatings a long wave effect. It only causes a minor reduction in surface tension and does not negatively influence the recoatability and intercoat adhesion. This product is suited for high quality pigmented and non-pigmented industrial coatings. BYK®-358 N does not cause turbidity in clear coats or haze in pigmented systems. This additive is thermally stable. verkürzen | |
| BYK®-359 | BYK 毕克 | BYK®-359 is a polyacrylate additive that improves leveling and gloss. It produces a long wave effect and avoids cratering in the system. These acrylate additives do not negatively influence recoatability or intercoat adhesion. Surface tension is only slig...weiterlesen BYK®-359 is a polyacrylate additive that improves leveling and gloss. It produces a long wave effect and avoids cratering in the system. These acrylate additives do not negatively influence recoatability or intercoat adhesion. Surface tension is only slightly reduced, and these additives are thermally stable. BYK-359 is mainly used as a leveling and anti-cratering additive in industrial coatings and coil coatings. Additionally it acts as a defoaming and air release agent. verkürzen | |
| BYK®-359 For Powder | BYK 毕克 | BYK®-359 For Powder is anti-crater and leveling additive for the formulation of resin masterbatches for powder coatings. It is a polyacrylate that is used to produce a resin masterbatch for powder coatings, especially for clear powder coatings. This pr...weiterlesen BYK®-359 For Powder is anti-crater and leveling additive for the formulation of resin masterbatches for powder coatings. It is a polyacrylate that is used to produce a resin masterbatch for powder coatings, especially for clear powder coatings. This product exhibits excellent anti-cratering along with optimum leveling. Fisheyes and pinholes are prevented to produce the best DOI (distinction of image) in the powder coating film. BYK-359 ensures quick and easy incorporation into the binder due to its good compatibility and low product viscosity. verkürzen | |
| BYK®-360 P | BYK 毕克 | BYK®-360 P is a polyacrylate, adsorbed on silicon dioxide. It is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. BYK-360 P improves leveling of powder coating systems and prevents "orange peel". Additio...weiterlesen BYK®-360 P is a polyacrylate, adsorbed on silicon dioxide. It is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. BYK-360 P improves leveling of powder coating systems and prevents "orange peel". Additionally, BYK-360 P prevents surface defects specific to powder coatings such as craters, pinholes and fisheyes. verkürzen | |
| BYK®-361 N For Powder | BYK 毕克 | BYK®-361 N For Powder is a polyacrylate used to produce a resin masterbatch for powder coatings, especially for clear powder coatings. This product exhibits excellent compatibility with all powder coating resins. BYK-361 N provides maximum transparency wi...weiterlesen BYK®-361 N For Powder is a polyacrylate used to produce a resin masterbatch for powder coatings, especially for clear powder coatings. This product exhibits excellent compatibility with all powder coating resins. BYK-361 N provides maximum transparency with excellent leveling and outstanding performance in long termed exterior exposure conditions.Low viscosity facilitates the ease of incorporation of BYK-361 N. BYK-361 N is also suitable for pigmented systems. verkürzen | |
| BYK®-364 P | BYK 毕克 | BYK®-364 P is a polyacrylate, adsorbed on silicon dioxide. This product has a polar structure and therefore pigment wetting is generally improved. BYK-364 P, especially in TGIC-alternative powder coating systems, will improve DOI (distinction of image) an...weiterlesen BYK®-364 P is a polyacrylate, adsorbed on silicon dioxide. This product has a polar structure and therefore pigment wetting is generally improved. BYK-364 P, especially in TGIC-alternative powder coating systems, will improve DOI (distinction of image) and reduce pinholes at the surface of the coating. BYK-364 P also improves leveling of powder coatings systems and prevents "orange peel“. Additionally, BYK-364 P prevents other surface defects specific to powder coating such as craters and fisheyes. BYK-364 P is an OH-functional additive which can be crosslinked with a suitable binder into the coating system. verkürzen | |
| BYK®-366 P | BYK 毕克 | BYK®-366 P is a standard anti-crater and leveling additive for pigmented powder coatings. It is polyacrylate, adsorbed on silicon dioxide. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. ...weiterlesen BYK®-366 P is a standard anti-crater and leveling additive for pigmented powder coatings. It is polyacrylate, adsorbed on silicon dioxide. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. BYK-366 P very effectively prevents craters and improves leveling. Additionally pinholes, fisheyes and "orange-peel“ are reduced. verkürzen | |
| BYK®-381 | BYK 毕克 | BYK®-381 is a leveling additive for aqueous systems. It is a solution of a polyacrylate, ionic. This product is an acrylic leveling additive which improves only leveling and has no effect on surface tension. | |
| Dynoadd® F-1 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-1 is a polymeric, non-silicone general-purpose flow and anti-crater additive for solvent-borne coatings. It lowers surface tension in coating formulations, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are ...weiterlesen Dynoadd® F-1 is a polymeric, non-silicone general-purpose flow and anti-crater additive for solvent-borne coatings. It lowers surface tension in coating formulations, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-1 has limited, but balanced compatibility with most backbone resins, and has defoaming properties in many formulations. Dynoadd® F-1 is an excellent choice in multiple-layer coatings. Dynoadd® F-1 has applications in industrial coatings, coil coatings, automotive OEM, printing inks, and woods coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. verkürzen | Request Sample |
| Dynoadd® F-100 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-100 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-100 is more compatible with b...weiterlesen Dynoadd® F-100 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-100 is more compatible with backbone resins than Dynoadd® F-1 and gives improved performance in more polar systems. Dynoadd® F-100 has applications in coil coatings, can coatings, automotive OEM, and printing inks. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, it is more compatible in polar systems than Dynoadd® F-1. It may be used in all layers in multi-layered systems. verkürzen | Request Sample |
| Dynoadd® F-101 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-101 is a polymeric, non-silicone flow and levelling agent. It reduces the surface tension in non-solvent and solvent based coating systems, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dyno...weiterlesen Dynoadd® F-101 is a polymeric, non-silicone flow and levelling agent. It reduces the surface tension in non-solvent and solvent based coating systems, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-101 is more polar than Dynoadd® F-100. Dynoadd® F-101 gives improved protection against surface defects in radcure formulations. The higher polarity contributes to good pigment wetting and improved adhesion in some systems. Dynoadd® F-101 has application in coil coatings, automotive OEM, printing ink, and radcure coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, Dynoadd® F-101 is seen to have an extra advantage in polar lacquer systems due to its polar properties. It may be used in all layers in multi-layered systems. verkürzen | Request Sample |
| Dynoadd® F-102 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulati...weiterlesen Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulations. Addition of Dynoadd® F-102 will have a positive contribution to substrate wetting. Dynoadd® F-102 can be used in combination with other Dynoadd® products such as Dynoadd® F-1. Dynoadd® F-102 has applications in coil coatings and general industrial. The additive has limited compatibility in many lacquer systems, thus contributing to good defoaming as well as leveling. It may be used in all layers in multi-layered systems. verkürzen | Request Sample |
| Dynoadd® F-300 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-300 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-300 is more compatible with b...weiterlesen Dynoadd® F-300 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-300 is more compatible with backbone resins than Dynoadd® F-3 and gives improved performance in more polar systems. Dynoadd® F-300 has applications in can coatings and coil coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, it is more compatible in polar systems than Dynoadd® F-3. It may be used in all layers in multi-layered systems. verkürzen | Request Sample |
| Dynoadd® F-3B | Dynoadd by Dynea 太尔化工 | Dynoadd® F-3Bg is Dynoadd® F-3 dissolved in butyl glycol. Dynoadd® F-3Bg is a polymeric, non-silicone flow and anti-crater additive for solvent-borne coatings. It lowers surface tension, thus improves substrate wetting. Surface defects like craters, cissi...weiterlesen Dynoadd® F-3Bg is Dynoadd® F-3 dissolved in butyl glycol. Dynoadd® F-3Bg is a polymeric, non-silicone flow and anti-crater additive for solvent-borne coatings. It lowers surface tension, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-3Bg has limited, but balanced compatibility with most backbone resins, and has defoaming properties in many formulations. Dynoadd® F-3Bg is an excellent choice in multiple-layer coatings, as it does not interfere with inter-coat adhesion. Dynoadd® F-3B has applications in coil coatings and can coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. verkürzen | Request Sample |
| Dynoadd® F-404 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-404 is a polyester-based, siloxane modified additive that effectively controls surface tension in solvent based coating systems. Dynoadd® F-404 gives excellent flow, levelling and overspray cratering resistance to spray applied coatings. The ad...weiterlesen Dynoadd® F-404 is a polyester-based, siloxane modified additive that effectively controls surface tension in solvent based coating systems. Dynoadd® F-404 gives excellent flow, levelling and overspray cratering resistance to spray applied coatings. The additive significantly improves film appearance at low dosage levels. Enhanced surface slip is gained with increasing level of addition. Dynoadd® F-404 has applications in general industry, wood coatings, and automotive OEM/refinish. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. verkürzen | Request Sample |
| Dynoadd® F-414 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The ad...weiterlesen Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The additive significantly improves film appearance at low dosage levels. Enhanced surface slip is gained with an increasing level of addition. verkürzen | Request Sample |
| Dynoadd® F-461 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a sig...weiterlesen Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a significant reduction in foam formation and stability in WB applications. Surface slip is improved considerably giving improved scratch and mar resistance. Dynoadd® F-461 is a wetting additive providing an optimal all-around balance of properties and benefits. verkürzen | Request Sample |
| Dynoadd® F-462 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-462, developed by Dynea, is a modified polysiloxane wetting and levelling additive for waterborne formulations. Dynoadd® F-462 reduces surface tension, improves substrate wetting, and prevents defects without increasing surface slip. | Request Sample |
| Dynoadd® F-601 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-601 is non-silicone, acrylic modified polyester for water-borne systems. Addition of Dynoadd® F-601 improves substrate wetting and flow and leveling. Dynoadd® F-601 solves problems with craters, pinholes, fish eyes and other surface imperfectio...weiterlesen Dynoadd® F-601 is non-silicone, acrylic modified polyester for water-borne systems. Addition of Dynoadd® F-601 improves substrate wetting and flow and leveling. Dynoadd® F-601 solves problems with craters, pinholes, fish eyes and other surface imperfections. Dynoadd® F-601 has applications in industrial coatings, wood coatings, RadCure, and automotive. The additive may be used in most water-borne coating systems independently of lacquer chemistry if the additive is added prior to dilution with water. It may be used in all layers in multi-layered systems. verkürzen | Request Sample |
| Dynoadd® F-606 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to impr...weiterlesen Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to improve pigment wetting. verkürzen | Request Sample |
| Dynoadd® F-608 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imper...weiterlesen Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imperfections. The excellent compatibility of the additive with a wide range of resins gives good film clarity in clear coats. Dynoadd® F-608 is compatible with acrylic dispersions, polyurethane dispersions (PUDs), alkyd emulsions, water-reducible alkyds, and polyesters. verkürzen | Request Sample |
| Efka® 3650 N | BASF Formulation Additives 巴斯夫配方助剂 | Efka® 3650 N reduces the surface tension of organic coating systems. This and good compatibility make it a very effective anti-cratering and flow control agent. It has the physical form of lightly yellowish liquid. Efka® 3650 N is especially suitable fo...weiterlesen Efka® 3650 N reduces the surface tension of organic coating systems. This and good compatibility make it a very effective anti-cratering and flow control agent. It has the physical form of lightly yellowish liquid. Efka® 3650 N is especially suitable for baking enamels based on alkyd, acrylic or polyester resins, polyurethane coatings, two-pack epoxy coatings, and air-drying alkyd systems. verkürzen | |
| EFKA® SL 3236 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SL 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray accep...weiterlesen EFKA® SL 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray acceptance. EFKA® SL 3236 is particularly recommended for non-aqueous coatings such as baking enamels based on alkyd, acrylic or polyester resins, acid-curable or polyurethane wood finishes particularly when applied by curtain coating, self-leveling epoxy flooring compounds, UV-curable paper lacquers and air-drying alkyd systems. verkürzen | |
| Efka® SL 3886 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® SL 3886 (formerly Efka® 3886) is a polyisocyanates modified polysiloxane designed to crosslink with hydroxyl or carboxyl groups. It provides improved leveling and reduced tendency for orange-peel or cratering. This product is used for all polyuretha...weiterlesen Efka® SL 3886 (formerly Efka® 3886) is a polyisocyanates modified polysiloxane designed to crosslink with hydroxyl or carboxyl groups. It provides improved leveling and reduced tendency for orange-peel or cratering. This product is used for all polyurethane systems such as wood finishes. verkürzen | |
| HSADA-44 | PCI Group, Inc. | HSADA-44 is a clear, fluoroaliphatic polymeric ester used in solvent, high solids and aqueous coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fish-eyes, picture framing and orange...weiterlesen HSADA-44 is a clear, fluoroaliphatic polymeric ester used in solvent, high solids and aqueous coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fish-eyes, picture framing and orange peel. HSADA-44 is active throughout the curing process and demonstrates significantly less foam development than other fluorosurfactants. verkürzen | |
| Letch CFC®-100 | CHEONGWOO CFC CO., LTD. | Letch CFC®-100 is a high boiling hydrocarbon levelling additive for organic solvent systems. It improves levelling and gloss, prevents pinholes and cratering, has anti-floating and anti-flooding effects, and has good workability in print inks. It finds ap...weiterlesen Letch CFC®-100 is a high boiling hydrocarbon levelling additive for organic solvent systems. It improves levelling and gloss, prevents pinholes and cratering, has anti-floating and anti-flooding effects, and has good workability in print inks. It finds application in alkyd and acrylic melamine high temperature baking systems, in vinyl, acrylic, and NC lacquer coatings, in air drying chlorinated rubber systems, and in epoxy air drying systems. verkürzen | |
| Letch CFC®-108 | CHEONGWOO CFC CO., LTD. | Letch CFC®-108 is a high boiling hydrocarbon and polysiloxane levelling additive for organic solvent systems. This clear liquid improves levelling and gloss, prevents pinholes and cratering, protects from orange peel in enamel baking systems, and improves...weiterlesen Letch CFC®-108 is a high boiling hydrocarbon and polysiloxane levelling additive for organic solvent systems. This clear liquid improves levelling and gloss, prevents pinholes and cratering, protects from orange peel in enamel baking systems, and improves brush marks in fast drying lacquer coatings. It finds application in alkyd and acrylic melamine high temperature baking systems, in polyurethane and epoxy air drying systems, in air drying chlorinated rubber systems, and in air drying lacquer systems. verkürzen | |
| Letch CFC®-139 | CHEONGWOO CFC CO., LTD. | Letch CFC®-139 is a high molecular modified acrylic ester copolymer leveling and defoaming additive for organic solvent systems. This light yellow, clear liquid improves gloss and surface leveling in acrylic baking systems, and has defoaming and anti-flo...weiterlesen Letch CFC®-139 is a high molecular modified acrylic ester copolymer leveling and defoaming additive for organic solvent systems. This light yellow, clear liquid improves gloss and surface leveling in acrylic baking systems, and has defoaming and anti-flooding effects in various kinds of baking systems. It finds application in alkyd and acrylic melamine high temperature baking systems, in acrylic and acrylic urethane coatings, and in organic solvent coating systems. verkürzen | |
| Letch CFC®-270 | CHEONGWOO CFC CO., LTD. | Letch CFC®-270 is a high molecular vinyl ether modified acrylic ester copolymer leveling and defoaming additive for organic solvent systems. This clear liquid improves gloss and surface leveling, brush marks for organic solvent systems, and does not have ...weiterlesen Letch CFC®-270 is a high molecular vinyl ether modified acrylic ester copolymer leveling and defoaming additive for organic solvent systems. This clear liquid improves gloss and surface leveling, brush marks for organic solvent systems, and does not have any disturbance pick-up properties during roll coatings. It finds application in alkyd, acrylic, and polyester high temperature baking systems, in acrylic air drying and acrylic urethane low temperature baking systems, in solvent and solvent free based epoxy coatings, and in high polymer coil coatings. verkürzen | |
| Letch CFC®-277 | CHEONGWOO CFC CO., LTD. | Letch CFC®-277 is a high molecular levelling and anti-cratering additive for organic solvent systems. This clear liquid improves levelling and gloss, prevents pinholes and cratering, improves substrate wetting, and has defoaming, deaerating, and anti-floo...weiterlesen Letch CFC®-277 is a high molecular levelling and anti-cratering additive for organic solvent systems. This clear liquid improves levelling and gloss, prevents pinholes and cratering, improves substrate wetting, and has defoaming, deaerating, and anti-flooding effects in various kinds of baking systems. It finds application in alkyd, acrylic, and polyester high temperature baking systems, in polyurethane coatings and air-dried alkyd systems, and in epoxy, polyester, and acrylic powder coatings. verkürzen | |
| Letch CFC®-344W | CHEONGWOO CFC CO., LTD. | Letch CFC®-344W is a low molecular levelling additive for water soluble coatings. This clear liquid prevents bubbles and boiling marks in baking systems, improves levelling, gloss, and anti-flooding, and prevents cratering of surface films. It finds appli...weiterlesen Letch CFC®-344W is a low molecular levelling additive for water soluble coatings. This clear liquid prevents bubbles and boiling marks in baking systems, improves levelling, gloss, and anti-flooding, and prevents cratering of surface films. It finds application in general industrial, automotive, and wood coating systems. verkürzen | |
| Letch CFC®-360W | CHEONGWOO CFC CO., LTD. | Letch CFC®-360W is a polyacrylate solution that improves levelling in water based systems. This clear liquid improves levelling and prevents pinholes, blocking for drying films, and cratering for surface films. It improves gloss and flow of coatings and f...weiterlesen Letch CFC®-360W is a polyacrylate solution that improves levelling in water based systems. This clear liquid improves levelling and prevents pinholes, blocking for drying films, and cratering for surface films. It improves gloss and flow of coatings and finds application in water soluble alkyd and acrylic baking systems, in automotive top and primer coatings, and in industrial coatings. verkürzen | |
| SCHUTZENWET- 84 | SCHÜTZEN Chemical Group | SCHUTZENWET- 84 is a wetting and anti-crater agent used in paints and coatings industry. It can be specifically used for PTFE (Polytetrafluoroethylene) wetting. | |
| SCHWEGO® Foam 6361 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6361 is a defoamer for water-based and UV-cured coating systems. This clear, light yellowish liquid is VOC- and silicone-free. SCHWEGO® foam 6361 is a product with interfacial activity which suppresses the formation of entrapped air in UV c...weiterlesen SCHWEGO® Foam 6361 is a defoamer for water-based and UV-cured coating systems. This clear, light yellowish liquid is VOC- and silicone-free. SCHWEGO® foam 6361 is a product with interfacial activity which suppresses the formation of entrapped air in UV coatings, i.e. air bubbles are destroyed before the film dries. Cratering is prevented and levelling is promoted. SCHWEGO® foam 6361 shows excellent defoaming action in UV coatings and is also suitable for coatings based on alkyd, polyester, epoxy, PU and acrylate. verkürzen | |
| SCHWEGO® Foam 6375 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6375 is a defoamer for water-based and solvent borne coating systems. This clear yellow liquid is silicone-free and shows good defoaming action in conventional, NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic...weiterlesen SCHWEGO® Foam 6375 is a defoamer for water-based and solvent borne coating systems. This clear yellow liquid is silicone-free and shows good defoaming action in conventional, NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic systems. SCHWEGO® foam 6375 is a product with interfacial activity which suppresses the formation of entrapped air in coatings and printing inks, i.e. air bubbles are destroyed before the film dries. Cratering is prevented and levelling is promoted. verkürzen | |
| SCHWEGO® Foam 8336 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 8336 is a defoamer for water-based coating systems. It is VOC-free and biodegradable. SCHWEGO® foam 8336 destroys the air bubbles included in the system very fast, and foam at the surface of the paint disappears at once. This product contain...weiterlesen SCHWEGO® Foam 8336 is a defoamer for water-based coating systems. It is VOC-free and biodegradable. SCHWEGO® foam 8336 destroys the air bubbles included in the system very fast, and foam at the surface of the paint disappears at once. This product contains a very compatible siloxane avoiding cratering, and in many coating systems it has a favourable influence on flow. SCHWEGO® foam 8336 defoams very well in all kinds of clear coatings and slightly pigmented systems, printing inks and UV-curing systems, especially those based on acrylics. The defoaming effect is also very good in wood varnishes and adhesives. verkürzen | |
| TEGO® Glide 466 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide 466 shows an excellent anti-crater effect on contaminated substrates. It is very effective and can be used in a broad range of different coatings | Request Sample |
| TEGO® Twin 4200 | Evonik Operations GmbH, BL Coating Additives | TEGO® Twin 4200 is a universal substrate wetting additive for waterborne wood coatings, industrial coatings and printing inks, which can also be used in solventborne and UV coatings. It provides outstanding wetting and anti-cratering properties. This prod...weiterlesen TEGO® Twin 4200 is a universal substrate wetting additive for waterborne wood coatings, industrial coatings and printing inks, which can also be used in solventborne and UV coatings. It provides outstanding wetting and anti-cratering properties. This product also offers enhanced reduction of surface tension and high compatibility. verkürzen | Request Sample |
| WorléeAdd 100 | Worlée-Chemie G.m.b.H. | W´Add 100 ist ein polymeres Verlaufmittel für lösemittelfreie und lösemittelhaltige Lack- und Druckfarben sowie Pulverlacke. | |
| WorléeAdd 101 | Worlée-Chemie G.m.b.H. | W´Add 101 ist ein spezielles, silikonfreies, polymeres Verlaufmittel für lösemittelhaltige und lösemittelfreie Lack- und Druckfarben einschließlich Pulverlacke. Der Zusatz beeinträchtigt in der Regel nicht die Untergrund- und Zwischenschichthaftung. Die s...weiterlesen W´Add 101 ist ein spezielles, silikonfreies, polymeres Verlaufmittel für lösemittelhaltige und lösemittelfreie Lack- und Druckfarben einschließlich Pulverlacke. Der Zusatz beeinträchtigt in der Regel nicht die Untergrund- und Zwischenschichthaftung. Die spezielle chemische Struktur dieses Produktes bewirkt sehr gute Verträglichkeit in Epoxy-, Polyester-, Hybrid-, Acryl-, Vinyl-, Urethanharz- und anderen Bindemittelsystemen. Bei höheren Zusätzen (über 2 %) wirkt W´Add 101 plastifizierend. verkürzen | |
| WorléeAdd 311 (10% In Xylene) | Worlée-Chemie G.m.b.H. | W´Add 311 ist ein siliconhaltiges Lackhilfsmittel zur Erhöhung der Kratzfestigkeit und Oberflächenglätte, sowie zur Verbesserung des Verlaufs. | |
| WorléeAdd 311 (30% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 ist ein siliconhaltiges Lackhilfsmittel zur Erhöhung der Kratzfestigkeit und Oberflächenglätte, sowie zur Verbesserung des Verlaufs. | |
| WorléeAdd 312 | Worlée-Chemie G.m.b.H. | W´Add 312 ist ein silikonhaltiges Lackhilfsmittel zur Erhöhung von Kratzfestigkeit und Glätte, sowie zur Verbesserung des Verlaufs. Die Lieferform in Isopar H (Exxon) ermöglicht den Einsatz in aromatenfreien Systemen. | |
| WorléeAdd 315 | Worlée-Chemie G.m.b.H. | W´Add 315 ist ein wasserlösliches Silicon-Lackhilfsmittel, das schon bei niedriger Konzentration die Gleitfähigkeit und damit die Kratzfestigkeit wesentlich erhöht. Gleichzeitig werden Oberflächenstörungen wie z.B. Kraterbildung, Zellenstruktur etc. verhi...weiterlesen W´Add 315 ist ein wasserlösliches Silicon-Lackhilfsmittel, das schon bei niedriger Konzentration die Gleitfähigkeit und damit die Kratzfestigkeit wesentlich erhöht. Gleichzeitig werden Oberflächenstörungen wie z.B. Kraterbildung, Zellenstruktur etc. verhindert, das Ausschwimmen von Pigmenten vermieden und die Substratbenetzung sowie der Verlauf verbessert. W´Add 315 kann sowohl in lösemittelhaltigen als auch wasserverdünnbaren Lacken eingesetzt werden, ohne die Überlackierbarkeit zu verschlechte verkürzen | |
| WorléeAdd 327 | Worlée-Chemie G.m.b.H. | W´Add 327 ist ein Silicon-Lackhilfsmittel für den Einsatz in lösemittelhaltigen als auch wasserverdünnbaren Systemen zur Vermeidung von Oberflächenstörungen wie z.B. Kraterbildung, Orangenschaleneffekt und Fischaugen, zur Verbesserung des Glanzes, des Ver...weiterlesen W´Add 327 ist ein Silicon-Lackhilfsmittel für den Einsatz in lösemittelhaltigen als auch wasserverdünnbaren Systemen zur Vermeidung von Oberflächenstörungen wie z.B. Kraterbildung, Orangenschaleneffekt und Fischaugen, zur Verbesserung des Glanzes, des Verlaufs und der Benetzung bei schwierigen Untergründen wie z.B. Kunststoffen und Aluminiumfolie und zur Erhöhung der Kratzfestigkeit. Besonders bewährt hat sich die Zugabe von 0,2 % W´Add 327 in wasserverdünnbaren, hochglänzenden Decklacken auf Ba verkürzen | |
| WorléeAdd 330 | Worlée-Chemie G.m.b.H. | W´Add 330 ist ein silikonhaltiges Additiv für vorwiegend wasserverdünnbare Systeme zur Beseitigung von Oberflächenstörungen und zur Verbesserung der Benetzung zum Untergrund. | |
| WorléeAdd 356 | Worlée-Chemie G.m.b.H. | W´Add 356 ist ein multifunktionelles siliconhaltiges Additiv zur Verbesserung der Ober-flächeneigenschaften von lösemittelhaltigen luft- und ofentrocknenden Lacken unterschied-licher Zusammensetzung. | |
| WorléeAdd 902 | Worlée-Chemie G.m.b.H. | W´Add 902 wird als Benzoinersatz zur Entgasung und Entlüftung von Epoxy-, Polyester-, Acrylharz-, Hybrid- und anderen Pulverlacksystemen, einschließlich Primid XL 552 (Ems/UCB) verwendet. W´Add 902 reduziert außerdem die Schmelzviskosität und verbessert d...weiterlesen W´Add 902 wird als Benzoinersatz zur Entgasung und Entlüftung von Epoxy-, Polyester-, Acrylharz-, Hybrid- und anderen Pulverlacksystemen, einschließlich Primid XL 552 (Ems/UCB) verwendet. W´Add 902 reduziert außerdem die Schmelzviskosität und verbessert die Pigmentdispergierung sowie den Verlauf und verhindert Nadelstiche. verkürzen | |
| WorléeAdd 904 | Worlée-Chemie G.m.b.H. | WorléeAdd 904 wird als Benzoinersatz zur Entgasung und Entlüftung von Epoxy-, Polyester-, Acrylharz-, Hybrid- und anderen Pulverlacksystemen, einschließlich Primid XL 552 (Ems/UCB) verwendet. WorléeAdd 904 reduziert außerdem die Schmelzviskosität und verb...weiterlesen WorléeAdd 904 wird als Benzoinersatz zur Entgasung und Entlüftung von Epoxy-, Polyester-, Acrylharz-, Hybrid- und anderen Pulverlacksystemen, einschließlich Primid XL 552 (Ems/UCB) verwendet. WorléeAdd 904 reduziert außerdem die Schmelzviskosität und verbessert die Pigmentdispergierung sowie den Verlauf und verhindert Nadelstiche. verkürzen | |
| WorléeAdd 915 | Worlée-Chemie G.m.b.H. | W´Add 915 ist ein Pulverlackadditiv, das die mechanischen Eigenschaften der Pulverlacke sowie das Aussehen der Oberflächen verbessert. | |
| XOANONS® WE-D557 | Anhui Xoanons Chemical Co., Ltd. 安徽嘉智信诺化工股份有限公司 | XOANONS® WE-D557 is a polyether siloxane copolymer for UV cure systems. It provides slight reduction of surface tension, reduces the friction coefficient, improves scratch resistance, and increases slip performance. This product imparts good recoating and...weiterlesen XOANONS® WE-D557 is a polyether siloxane copolymer for UV cure systems. It provides slight reduction of surface tension, reduces the friction coefficient, improves scratch resistance, and increases slip performance. This product imparts good recoating and minimal influence on the adhesion of coating films. It also offers excellent anti-cratering properties. Turbidity and viscosity may occur at low temperatures, and it becomes transparent and flowable after heating, which does not affect the quality of the products. verkürzen | |
| YCK-1070 | YCK CHEMICAL 毅克化学(上海)科技有限公司 | YCK-1070 helps to eliminate craters, improve leveling, and prevent film floating. It is used in artificial leather processing for increasing surface gloss and providing assisting leveling action, and has applications for furniture, automotive and industri...weiterlesen YCK-1070 helps to eliminate craters, improve leveling, and prevent film floating. It is used in artificial leather processing for increasing surface gloss and providing assisting leveling action, and has applications for furniture, automotive and industrial coatings. YCK-1060 has a non-volatile matter of 100%, a density at 25℃ of 0.96 g/cm^3, a refractive index (25℃) of 1.401, and a flash point of 61℃. verkürzen | |
| YCK-1140 | YCK CHEMICAL 毅克化学(上海)科技有限公司 | YCK-1140 has a transparent liquid appearance, with solvent of diproplylene glycol monomethylether. It has a density at 25℃ of 0.99 g/cm^3, non-volatile matter of 52%, a flash point of 86℃, and a refractive index (25℃) of 1.442. This product has applicatio...weiterlesen YCK-1140 has a transparent liquid appearance, with solvent of diproplylene glycol monomethylether. It has a density at 25℃ of 0.99 g/cm^3, non-volatile matter of 52%, a flash point of 86℃, and a refractive index (25℃) of 1.442. This product has applications for automotive coatings, industrial coatings, furniture coatings, coil coatings, and printing inks. YCK-1140 helps improve flow and leveling, improve surface slip, scratch resistance and block resistance, and improve creditability to dust and spray. It offers quick substrate wetting, good crater resistance, leveling thicker coating on the vertical surface, has great compatibility and does not easily produce cloudiness. This product helps to reduce sensitivity of wood coating and furniture finish to air flow, prevent formation of Bernard cell, and improve the orientation of flatting agents. verkürzen |
