| ASAFA | PCI Group, Inc. | ASAFA is a pale amber colored blend of a dimethyl silicone and refined naphthenic base oil. Designed for use in conventional systems such as acrylic resins, alkyds, polyamide, polyester and urethane. It acts to control silking, flooding and pigment float ...weiterlesen ASAFA is a pale amber colored blend of a dimethyl silicone and refined naphthenic base oil. Designed for use in conventional systems such as acrylic resins, alkyds, polyamide, polyester and urethane. It acts to control silking, flooding and pigment float while sharpening gloss, improving pigment wetting and enhancing leveling. verkürzen | |
| ASAFA #3 | PCI Group, Inc. | ASAFA #3 is a clear-colored linear polydimethylsiloxane polymer used where floating or silking is a problem. It effectively balances out solvents during the air dry process. It can be used in coating systems such as alkyds, modified alkyds, acrylics, epox...weiterlesen ASAFA #3 is a clear-colored linear polydimethylsiloxane polymer used where floating or silking is a problem. It effectively balances out solvents during the air dry process. It can be used in coating systems such as alkyds, modified alkyds, acrylics, epoxies, vinyls and most oleo-resinous non-aqueous systems. verkürzen | |
| ASLA | PCI Group, Inc. | ASLA is a clear, silicone-free, polyvinyl ethyl ether solution used to improve color development, leveling and gloss while controllling surface flooding and floating. It can be used in acrylic resins, alkyds (long, med., short oils), polyamide, polyester ...weiterlesen ASLA is a clear, silicone-free, polyvinyl ethyl ether solution used to improve color development, leveling and gloss while controllling surface flooding and floating. It can be used in acrylic resins, alkyds (long, med., short oils), polyamide, polyester and urethane pigmented and non-pigmented systems. verkürzen | |
| BYK®-P 104 S | BYK 毕克 | BYK®-P 104 S is a wetting and dispersing additive for solvent-borne systems. It is a solution of a lower molecular weight unsaturated polycarboxylic acid polymer and a polysiloxane copolymer. This product can be used in the same systems as BYK-P 104. The ...weiterlesen BYK®-P 104 S is a wetting and dispersing additive for solvent-borne systems. It is a solution of a lower molecular weight unsaturated polycarboxylic acid polymer and a polysiloxane copolymer. This product can be used in the same systems as BYK-P 104. The additive also contains a small amount of a polysiloxane copolymer to more effectively avoid flooding. This silicone content is additionally helpful in preventing Bénard cells and silking, and also improves surface slip, leveling and orientation of flatting agents or aluminium flakes. Therefore it is oftentimes not necessary to add a separate dosage of an otherwise needed silicone additive. verkürzen | |
| EFKA® FA 4671 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4671 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binders. This results in reduced dispersion time, stabilization of the pigment dispersion, decreased flooding of pigments, and prevention of hard sedimen...weiterlesen EFKA® FA 4671 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binders. This results in reduced dispersion time, stabilization of the pigment dispersion, decreased flooding of pigments, and prevention of hard sedimentation. This product is an alkylol ammonium salt of a high-molecular weight carboxylic acid. EFKA® FA 4671 is suitable for use in low or high-polarity solvent systems as well as water-based coatings. It is used to reduce flooding and settling in non-polar systems e.g. air drying alkyd paints. It is an effective anti-settling agent in wash and shop primers. It improves the color acceptance of tinting bases in white latex paints, resulting in higher pigment efficiency. verkürzen | |
| Letch CFC®-840 | CHEONGWOO CFC CO., LTD. | Letch CFC®-840 is a high molecular levelling and anti-cratering additive for high solid systems. This clear liquid is compatible with coatings, has a protecting effect from orange peel, improves gloss and anti-flooding, and prevents silking and cratering ...weiterlesen Letch CFC®-840 is a high molecular levelling and anti-cratering additive for high solid systems. This clear liquid is compatible with coatings, has a protecting effect from orange peel, improves gloss and anti-flooding, and prevents silking and cratering in powder coatings. It finds application in epoxy floor coatings, in epoxy, urethane, and UV coating systems, in polyester and epoxy powder coating systems, in industrial baking systems, and as a catalyst in curing systems. verkürzen | |
| Raybo 3 AntiSilk | Raybo Chemical | Raybo 3 AntiSilk is a combination of primarily volatile compounds in a light blue liquid form. This product is most commonly used to provide floating and silking control in protective coating applications. | |
| Raybo 64 AquaSilk | Raybo Chemical | Raybo 64 AquaSilk is a coating additive in a light blue liquid form. This product is most commonly used to improve floating and silking control in water-based and water-reducible coating system applications. |
