| ADDITOL® XL 6507 | Allnex | ADDITOL® XL 6507 is a deairator/defoamer for solvent born paint systems. | Request Sample |
| Airase® 8070 Deaerator | Evonik Operations GmbH, BL Coating Additives | Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface...weiterlesen Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface defects. Airase® 8070 Deaerator can be especially effective against microfoam because it is designed to leave a defect-free surface, even when thick layers are applied or highly vicous coatings are sprayed. Airase® 8070 Deaerator contains no chemicals that are considered VOCs per the European Solvent Directive or the European Decorative Paint Directive; it contributes no VOCs nder EPA Method 24 testing conditions when evaluated at typical used levels (1% by weight) in a zero-VOC coating formulation. Additionally, Airase® 8070 Deaerator contains no added alkylphenol ethoxylates (APEs) or hazardous air pollutants (HAPs). verkürzen | Request Sample |
| Bensub 2908 | Guangzhou ZEHM Functional Materials R&D Co.,Ltd. | Bensub 2908 is a white powder and a degassing agent that has a density of 0.93. This product can reduce particulates on cured film, and is commonly used for interior and exterior powder coatings. | |
| Bensub 2999 | Guangzhou ZEHM Functional Materials R&D Co.,Ltd. | Bensub 2999 is a white powder and a high-performance degassing agent that has a softening point of 95-115°C. This product has good discoloration resistance and is commonly used for interior and exterior powder coatings. | |
| BLISTER FREE 3 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 3 is a defoamer and deaerator for solvent borne and water-based coating systems. It is silicone free and can be used in solvent containing and water dilutable systems. In solvent containing systems BLISTER FREE 3 is particularly effective a...weiterlesen BLISTER FREE 3 is a defoamer and deaerator for solvent borne and water-based coating systems. It is silicone free and can be used in solvent containing and water dilutable systems. In solvent containing systems BLISTER FREE 3 is particularly effective as de-aerating and partially also as a levelling agent. This applies to the following binders: alkyd, alkyd/polyester-, unsaturated polyester-, NC-, AC-, PU, and acrylic systems. BLISTER FREE 3 is also very effective in water dilutable coating systems particularly, if they are based on alkyd/acrylics, saturated polyesters and epoxyde systems. verkürzen | |
| BLISTER FREE 45 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 45 is a defoamer for solvent borne and water-based coating systems that is silicone free. It exhibits good defoaming action in the following solvent based systems: Nitrocellulose, acid-catalysed, and polyurethane. In general, BLISTER FREE 45...weiterlesen BLISTER FREE 45 is a defoamer for solvent borne and water-based coating systems that is silicone free. It exhibits good defoaming action in the following solvent based systems: Nitrocellulose, acid-catalysed, and polyurethane. In general, BLISTER FREE 45 has a good de-aerating effect on water thinnable coatings if they are based on the following binders: polyester, acid resin, and acrylic. verkürzen | |
| BLISTER FREE 54 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 54 is a defoamer for solvent borne coating systems. It reduces the surface tension in solvent borne and solvent free coating systems. This product also improves leveling and avoids cratering. This product is a clear yellow liquid. Special app...weiterlesen BLISTER FREE 54 is a defoamer for solvent borne coating systems. It reduces the surface tension in solvent borne and solvent free coating systems. This product also improves leveling and avoids cratering. This product is a clear yellow liquid. Special applications are printing inks and coil coating systems. verkürzen | |
| BLISTER FREE 55 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 55 is a defoaming additive for water-based coating systems that is silicone free. It has an excellent de-aerating effect in all types of water-borne alkyd systems, i.e. those, which become water soluble after neutralisation and also in alkyd ...weiterlesen BLISTER FREE 55 is a defoaming additive for water-based coating systems that is silicone free. It has an excellent de-aerating effect in all types of water-borne alkyd systems, i.e. those, which become water soluble after neutralisation and also in alkyd emulsions, with or without co-solvents. There are also very good de-aerating effects in many modified alkyds and alkyd/acrylic hybrids. This product was developed to prevent foam and bubbles during manufacture and application of aqueous coatings. BLISTER FREE 55 destroys foam very quickly by the interfacially active components. In many applications levelling is improved. verkürzen | |
| BLISTER FREE 56 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 56 is a defoamer and deaerator for water-based coating systems. This clear yellow liquid is silicone free. It is an interfacially active product, which suppresses the inclusion of air and destroys air bubbles before the film dries. Cratering ...weiterlesen BLISTER FREE 56 is a defoamer and deaerator for water-based coating systems. This clear yellow liquid is silicone free. It is an interfacially active product, which suppresses the inclusion of air and destroys air bubbles before the film dries. Cratering is thereby prevented. The film elasticity is improved. BLISTER FREE 56 is suitable in most water-based systems and acts as defoamer, deaerator and to some extend as levelling additive. This product is especially recommended in the following systems: alkyd / acrylic paints, saturated polyesters, epoxydes, and UV coating systems. verkürzen | |
| BLISTER FREE 66 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 66 can be used as a de-aerating agent in all conventional coating systems. It is particularly effective in systems based on polyesters, polyurethanes and acrylates. The formation of air bubbles during manufacture and application is prevented ...weiterlesen BLISTER FREE 66 can be used as a de-aerating agent in all conventional coating systems. It is particularly effective in systems based on polyesters, polyurethanes and acrylates. The formation of air bubbles during manufacture and application is prevented and entrapped air as well as bubbles are quickly destroyed. Defoaming is promoted and defects like pinholes and craters are avoided. This product is a colourless to light yellowish liquid. verkürzen | |
| BLISTER FREE 75 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 75 is a defoamer for solvent borne and water-based coating systems. This clear, light yellowish liquid is silicone free and shows good defoaming action in conventional, NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying ...weiterlesen BLISTER FREE 75 is a defoamer for solvent borne and water-based coating systems. This clear, light yellowish liquid is silicone free and shows good defoaming action in conventional, NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic systems. BLISTER FREE 75 is a product with interfacial activity, which suppresses the formation of entrapped air in coatings and printing inks, i.e. air bubbles are destroyed before the film dries. Cratering is prevented and levelling is improved. verkürzen | |
| BLISTER FREE 77 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 77 is a highly effective defoamer for solvent borne coating systems. This product is especially suitable in polyester systems with and without paraffins and alkyd/polyester systems. BLISTER FREE 77 is suitable in epoxy, PUR- and acrylate sy...weiterlesen BLISTER FREE 77 is a highly effective defoamer for solvent borne coating systems. This product is especially suitable in polyester systems with and without paraffins and alkyd/polyester systems. BLISTER FREE 77 is suitable in epoxy, PUR- and acrylate systems. Complete de-aerating is a requirement for an excellent film formation. Trapped air, pinholes can cause dirt retention and difficulties, when topcoating and polishing. Apart from these surface defects, frequently reductions in gloss and deterioration of water resistance are observed. This product reduces considerably the formation of blisters and causes intensive de-aerating and the uniform formation of the waxlayer with unsaturated polyesters. verkürzen | |
| BLISTER FREE 88 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 88 is a biodegradable defoamer for solvent borne coating systems. It is an interfacially active additive, which influences the surface tension. This property reduces the formation of bubbles to a minimum during the manufacture of paint or dur...weiterlesen BLISTER FREE 88 is a biodegradable defoamer for solvent borne coating systems. It is an interfacially active additive, which influences the surface tension. This property reduces the formation of bubbles to a minimum during the manufacture of paint or during application. Any bubbles formed are quickly destroyed. In general BLISTER FREE 88 has a beneficial effect on the flow of the paint film. It is especially suitable in polyester systems free from paraffins. BLISTER FREE 88 shows also good defoaming in epoxy, PUR and acrylate based systems. verkürzen | |
| Borchi® Gol 0011 | OMG Borchers GmbH | Borchi® Gol 0011 is a liquid flow promoter and deaerator for solvent-containing and solvent-free epoxy resin and polyurethane coatings. It is used to improve the flow and surface properties of coatings based on solvent-containing and solvent-free, liquid ...weiterlesen Borchi® Gol 0011 is a liquid flow promoter and deaerator for solvent-containing and solvent-free epoxy resin and polyurethane coatings. It is used to improve the flow and surface properties of coatings based on solvent-containing and solvent-free, liquid epoxy and polyurethane resins. This product acts as a flow promoter in such systems, destroying bubbles appearing during application and preventing crater formation. Borchi® Gol 0011 can be used in all conventional solvent-containing and solvent-free, liquid 2-component epoxy resin and polyurethane systems.. verkürzen | |
| Borchi® Gol E2 | OMG Borchers GmbH | Borchi® Gol E2 is a paint additive for the improvement of flow properties and deaeration of air-drying, stove-drying and catalysed paints. Blistering during preparation and surface defects caused by application are eliminated. This product is silicone-fre...weiterlesen Borchi® Gol E2 is a paint additive for the improvement of flow properties and deaeration of air-drying, stove-drying and catalysed paints. Blistering during preparation and surface defects caused by application are eliminated. This product is silicone-free and can be used in all solvent-containing and solvent-free, single- and multi-component paints. Factors affecting the efficacy of the surface-active substances, besides the type of binder used, are application and mixing conditions. verkürzen | |
| BYK®-035 | BYK 毕克 | BYK®-035 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially suitable for emulsion systems with a PVC of 20-40. Its effectiveness is not impaired by high shear forces. | |
| BYK®-037 | BYK 毕克 | BYK®-037 is an emulsion of paraffin based mineral oils and hydrophobic components, containing silicone. It is used in all emulsion paints and plasters as well as for defoaming during the dispersion production. BYK-037 is very cost-efficient. | |
| BYK®-038 | BYK 毕克 | BYK®-038 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially designed for universal use in APEO-free emulsions. It contains a small amount of a paint compatible silicone which enhances ex...weiterlesen BYK®-038 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially designed for universal use in APEO-free emulsions. It contains a small amount of a paint compatible silicone which enhances excellent efficiency. BYK-038 should be preferably used in emulsion systems with a PVC from 20 to 70. verkürzen | |
| CERAFLOUR® 993 | BYK 毕克 | CERAFLOUR® 993 is a micronized wax for improving surface properties of solvent-borne paint systems and powder coatings. It is composed of micronized amide wax. This product is used in solvent-borne systems and powder coatings. | |
| CERAFLOUR® 994 | BYK 毕克 | CERAFLOUR® 994 is a micronized wax for improving surface properties of solvent-borne paint systems and powder coatings. It is composed of ultra fine micronized amide wax. This product is used in solvent-borne systems and powder coatings. | |
| CERAFLOUR® 994 For Powder | BYK 毕克 | CERAFLOUR® 994 For Powder is an additive to improve the charge transfer efficiency of powder coatings. It is composed of ultra fine micronized amide wax. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane...weiterlesen CERAFLOUR® 994 For Powder is an additive to improve the charge transfer efficiency of powder coatings. It is composed of ultra fine micronized amide wax. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. verkürzen | |
| CV2-1148 | NuSil Silicone Technology 1 | CV2-1148 is a black silicone oxygen protective coating that can be used for bonding applications where a non-slumping and one-part material is required. This product can also provide excellent joint coverage and thin section encapsulation. It is ideal for...weiterlesen CV2-1148 is a black silicone oxygen protective coating that can be used for bonding applications where a non-slumping and one-part material is required. This product can also provide excellent joint coverage and thin section encapsulation. It is ideal for applications that require minimal volatile condensables under extreme operating conditions. verkürzen | |
| EFKA® SI 2722 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SI 2722 produces rapid de-aeration of solvent-free epoxy and polyurethane compounds so that foam and blister-free self-leveling coatings can be produced. It acts as a leveling agent, giving a smooth surface to the coating. EFKA® 2722 can be used in ...weiterlesen EFKA® SI 2722 produces rapid de-aeration of solvent-free epoxy and polyurethane compounds so that foam and blister-free self-leveling coatings can be produced. It acts as a leveling agent, giving a smooth surface to the coating. EFKA® 2722 can be used in pigmented or non-pigmented resin systems such as solvent-free epoxy systems and solvent-free polyurethane systems. verkürzen | |
| EFKA® SI 2723 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SI 2723 has been developed to produce rapid de-aeration of solvent-free polyurethane and epoxy compounds used in flooring application, so that foam and blister-free self-leveling coatings can be produced. It acts as a leveling agent, giving a smooth...weiterlesen EFKA® SI 2723 has been developed to produce rapid de-aeration of solvent-free polyurethane and epoxy compounds used in flooring application, so that foam and blister-free self-leveling coatings can be produced. It acts as a leveling agent, giving a smooth surface to the coating. On the other hand, it presents the advantage of low odor. EFKA® SI 2723 can be used in pigmented or non-pigmented resin systems such as solvent-free epoxy and polyurethane systems, low odor, high-solids two-pack systems and solvent-free radiation-curable systems. verkürzen | |
| EFKA® SL 3236 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SL 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray accep...weiterlesen EFKA® SL 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray acceptance. EFKA® SL 3236 is particularly recommended for non-aqueous coatings such as baking enamels based on alkyd, acrylic or polyester resins, acid-curable or polyurethane wood finishes particularly when applied by curtain coating, self-leveling epoxy flooring compounds, UV-curable paper lacquers and air-drying alkyd systems. verkürzen | |
| Efka® SL 3239 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® SL 3239 (formerly Efka® 3239) is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters and ketones. It is insoluble in water. This product improves leveling and surface smoothness, increases slip and mar-resist...weiterlesen Efka® SL 3239 (formerly Efka® 3239) is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters and ketones. It is insoluble in water. This product improves leveling and surface smoothness, increases slip and mar-resistance and acts as a defoamer and de-aeration aid. Efka® SL 3239 is particularly recommended for these coatings: baking enamels based on alkyd, acrylic or polyester resins; acid-curable or polyurethane wood finishes particularly when applied by curtain coating; self-leveling epoxy flooring compounds; and UV-curable paper lacquers. verkürzen | |
| FOAMSTAR® SI 2292 NC | BASF Formulation Additives 巴斯夫配方助剂 | FOAMSTAR® SI 2292 NC is a defoamer and deaerating agent for use in purely aqueous coatings and those coatings containing co solvents based on polymer emulsions and applied by curtain coating, spraying, dipping, rolling or brushing on wood, wood products o...weiterlesen FOAMSTAR® SI 2292 NC is a defoamer and deaerating agent for use in purely aqueous coatings and those coatings containing co solvents based on polymer emulsions and applied by curtain coating, spraying, dipping, rolling or brushing on wood, wood products or metal. Due to its long-term defoaming effect FOAMSTAR® SI 2292 NC has proved to be suitable in emulsion and suspension polymerization, particularly in the manufacture of PVC, vinyl acetate and acrylic emulsions. FOAMSTAR® SI 2292 NC may be used during polymerization and monomer stripping. verkürzen | |
| SCHWEGO® Foam 6303 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6303 is a defoamer and deaerator for water-based and solvent borne coating systems. This yellow liquid is silicone-free and acts - depending on the system – as defoaming and de-aerating additive. In most cases SCHWEGO® foam 6303 also improve...weiterlesen SCHWEGO® Foam 6303 is a defoamer and deaerator for water-based and solvent borne coating systems. This yellow liquid is silicone-free and acts - depending on the system – as defoaming and de-aerating additive. In most cases SCHWEGO® foam 6303 also improves levelling. Even at maximum level of addition SCHWEGO® foam 6303 is completely soluble in the coating systems. The elasticity of the film improves. This product can be used in solvent borne and water-based systems. In solvent borne systems SCHWEGO® foam 6303 is particularly effective as de-aerating and partially also as a levelling additive. verkürzen | |
| SCHWEGO® Foam 6351 | Bernd Schwegmann GmbH & Co. KG | Schwego® Foam 6351 is a deaerating additive for solvent borne, water-based and solvent free coating systems. This colourless opal liquid is silicone-free and can be used in almost all solvent free and solvent containing coating systems. It is particularly...weiterlesen Schwego® Foam 6351 is a deaerating additive for solvent borne, water-based and solvent free coating systems. This colourless opal liquid is silicone-free and can be used in almost all solvent free and solvent containing coating systems. It is particularly effective in hammer finishes and structural coatings, reactive thick film systems, heavily pigmented coating systems and formulations, which are suitable for airless spraying. This product is also effective in aqueous industrial finishes (alkyd/melamine systems). verkürzen | |
| SCHWEGO® Foam 6354 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® foam 6354 is a defoamer for water-based and solvent borne coating systems, free of VOC. It is effective in almost all solvent containing one- and multicomponent paint and coating systems. This product reduces the surface tension in solvent based ...weiterlesen SCHWEGO® foam 6354 is a defoamer for water-based and solvent borne coating systems, free of VOC. It is effective in almost all solvent containing one- and multicomponent paint and coating systems. This product reduces the surface tension in solvent based and solvent free paint systems. It improves levelling, prevents cratering and showing through the substrate. verkürzen | |
| SCHWEGO® Foam 6356 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6356 is a defoamer and deaerator for water-based coating systems. This turbid, light yellowish, milky liquid is silicone free. It is an interfacially active product, which suppresses the inclusion of air and destroys air bubbles before the f...weiterlesen SCHWEGO® Foam 6356 is a defoamer and deaerator for water-based coating systems. This turbid, light yellowish, milky liquid is silicone free. It is an interfacially active product, which suppresses the inclusion of air and destroys air bubbles before the film dries. Cratering is thereby prevented, and the film elasticity is improved. SCHWEGO® foam 6356 is especially recommended in the following systems: alkyd / acrylic paints, saturated polyesters, epoxydes and UV coating systems. verkürzen | |
| SCHWEGO® Foam 6375 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6375 is a defoamer for water-based and solvent borne coating systems. This clear yellow liquid is silicone-free and shows good defoaming action in conventional, NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic...weiterlesen SCHWEGO® Foam 6375 is a defoamer for water-based and solvent borne coating systems. This clear yellow liquid is silicone-free and shows good defoaming action in conventional, NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic systems. SCHWEGO® foam 6375 is a product with interfacial activity which suppresses the formation of entrapped air in coatings and printing inks, i.e. air bubbles are destroyed before the film dries. Cratering is prevented and levelling is promoted. verkürzen | |
| SCHWEGO® Foam 6377 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6377 is a defoamer for water-based, solvent borne and solvent-free coating systems. This clear yellow liquid is VOC- and silicone-free. SCHWEGO® foam 6377 is especially suitable in polyester systems and alkyd/polyester systems. It is also su...weiterlesen SCHWEGO® Foam 6377 is a defoamer for water-based, solvent borne and solvent-free coating systems. This clear yellow liquid is VOC- and silicone-free. SCHWEGO® foam 6377 is especially suitable in polyester systems and alkyd/polyester systems. It is also suitable in epoxy, PUR- and acrylate systems. Effective deaeration is required for smooth film formation. Trapped air, pinholes can cause dirt retention and difficulties when topcoating and polishing. Apart from these surface defects frequently a reduction in gloss and a deterioration in water resistance are observed. SCHWEGO® foam 6377 produces intensive defoaming and strongly reduces bubbles. Also, the even formation of the wax layer with unsaturated polyesters is promoted. SCHWEGO® foam 6377 is effective in wax containing as well as in wax free systems. verkürzen | |
| SCHWEGO® Foam 6388 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6388 is a defoamer for solvent borne and water-based coating systems. This clear, yellow liquid is VOC-free. SCHWEGO® foam 6388 is an interfacially active additive, which influences the surface tension. Hence, the formation of bubbles during...weiterlesen SCHWEGO® Foam 6388 is a defoamer for solvent borne and water-based coating systems. This clear, yellow liquid is VOC-free. SCHWEGO® foam 6388 is an interfacially active additive, which influences the surface tension. Hence, the formation of bubbles during the manufacture of paint or during application is reduced to a minimum. Any bubbles formed are quickly destroyed. In general SCHWEGO® foam 6388 has beneficial effect on the flow of the paint film. verkürzen | |
| SCHWEGO® Foam 8325 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 8325 is a liquid, very effective defoaming agent for all emulsion paints and particularly for those based on styrene/butadiene latex and acrylic copolymers. It is readily emulsifiable in water and is free from silicones. This product is a li...weiterlesen SCHWEGO® Foam 8325 is a liquid, very effective defoaming agent for all emulsion paints and particularly for those based on styrene/butadiene latex and acrylic copolymers. It is readily emulsifiable in water and is free from silicones. This product is a light yellowish liquid. verkürzen | |
| SURFYNOL® 118 | Evonik Operations GmbH, BL Coating Additives | SURFYNOL® 118 is a very compatible, formulated molecular defoamer/deaerator based on Gemini surfactant technology. It can be used for a wide variety of applications where pinhole elimination, macro-, and micro-foam control is needed without causing any fi...weiterlesen SURFYNOL® 118 is a very compatible, formulated molecular defoamer/deaerator based on Gemini surfactant technology. It can be used for a wide variety of applications where pinhole elimination, macro-, and micro-foam control is needed without causing any film defects. verkürzen | Request Sample |
| Surfynol® MD 20 | Evonik Operations GmbH, BL Coating Additives | Surfynol® MD 20 is a multifunctional defoamer it provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minimizing surface defects. Surfynol® MD 20 is exceptionally effective at eliminating ...weiterlesen Surfynol® MD 20 is a multifunctional defoamer it provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minimizing surface defects. Surfynol® MD 20 is exceptionally effective at eliminating microfoam and other foam related defects in waterborne systems when used as a foam control agent. It is 100% active, solvent-free, clear liquid. It is free of silicone and hydrophobic silica. It is temperature and pH stable (pH 1-13). Applications include, coatings, graphic arts, adhesives, dye and pigment synthesis, pigment grinding, oil and gas processing, cleaning products, metalworking fluids, cements, mortars and grouts and personal care. verkürzen | Request Sample |
| TEGO® Airex 900 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 900 is an organo-modified polysiloxane, containing fumed silica. This product is an excellent defoamer and deaerator for solvent-based, solvent-free and radiation curing coating systems. It is a liquid and has outstanding performance particu...weiterlesen TEGO® Airex 900 is an organo-modified polysiloxane, containing fumed silica. This product is an excellent defoamer and deaerator for solvent-based, solvent-free and radiation curing coating systems. It is a liquid and has outstanding performance particularly in higher viscosity formulations. TEGO® Airex 900 is recommended to use for self-leveling floor coatings and to be applied by brush, roller, or airless spraying. verkürzen | Request Sample |
| TEGO® Airex 901 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 901 W is a polyether siloxane copolymer, containing fumed silica. This product is an excellent defoamer and deaerator concentrate. It has excellent effectiveness against micro- and macro-foam in airless and airmix applications. TEGO® Airex 901...weiterlesen TEGO® Airex 901 W is a polyether siloxane copolymer, containing fumed silica. This product is an excellent defoamer and deaerator concentrate. It has excellent effectiveness against micro- and macro-foam in airless and airmix applications. TEGO® Airex 901 W is used particularly for waterborne and high viscosity formulations. It is also recommended for flexo and gravure printing, and to be applied by brush, roller, or airless spraying. verkürzen | Request Sample |
| TEGO® Airex 901 W N | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 901 W N is a highly effective deaerator concentrate based on polyether siloxane technology. Outstandingly effective against micro-foam in a variety of applications. | Request Sample |
| TEGO® Airex 902 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 902 W is a highly compatible deaerator emulsion of a polyether siloxane copolymer, containing fumed silica. This product is effective against micro- and macro-foam. TEGO® Airex 902 W is highly suitable for airless spraying and compressed air s...weiterlesen TEGO® Airex 902 W is a highly compatible deaerator emulsion of a polyether siloxane copolymer, containing fumed silica. This product is effective against micro- and macro-foam. TEGO® Airex 902 W is highly suitable for airless spraying and compressed air spraying applications as well as for brush and roller applications. It is also recommended for use in self-leveling floor coatings. verkürzen | Request Sample |
| TEGO® Airex 902 W N | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 902 W N is a highly effective and compatible deaerator emulsion based on polyether siloxane technology. Outstandingly effective against micro- and macro-foam. | Request Sample |
| TEGO® Airex 904 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 904 W is a polyether siloxane copolymer, containing fumed silica. This product is an effective deaerator concentrate to eliminate micro-foam. TEGO® Airex 904 W has a good balance of compatibility and effectiveness. It is highly suitable for ai...weiterlesen TEGO® Airex 904 W is a polyether siloxane copolymer, containing fumed silica. This product is an effective deaerator concentrate to eliminate micro-foam. TEGO® Airex 904 W has a good balance of compatibility and effectiveness. It is highly suitable for airless spraying applications. It is also suitable for compressed air spraying and brush/roller applications. Haziness, caused by low temperatures, is reversible and does not affect the performance properties of TEGO® Airex 904 W. verkürzen | Request Sample |
| TEGO® Airex 904 W N | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 904 W N is a very effective deaerator concentrate based on polyether siloxane technology. Very effective against micro-foam. Offers good compatibility. | Request Sample |
| TEGO® Airex 910 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 910 is a highly compatible defoamer and deaerator for both solvent-free and solvent-based coating systems. It can be post added and is ideally suited for use in clearcoats. TEGO® Airex 910 is suitable for airless spraying as well as dip coatin...weiterlesen TEGO® Airex 910 is a highly compatible defoamer and deaerator for both solvent-free and solvent-based coating systems. It can be post added and is ideally suited for use in clearcoats. TEGO® Airex 910 is suitable for airless spraying as well as dip coating, flow coating, and curtain coating. It is also suitable for self-leveling floor coating and brush and roller applications. verkürzen | Request Sample |
| TEGO® Airex 920 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 920 is a highly compatible deaerator concentrate for radiation-curing coating systems. It is a liquid organic polymer and silicone-free. This product has universal use in clear and pigmented formulations. TEGO® Airex 920 is highly suitable fo...weiterlesen TEGO® Airex 920 is a highly compatible deaerator concentrate for radiation-curing coating systems. It is a liquid organic polymer and silicone-free. This product has universal use in clear and pigmented formulations. TEGO® Airex 920 is highly suitable for flexo and gravure printing. It is also suitable for compressed air spraying, as well as for dip coating, flow coating, and curtain coating verkürzen | Request Sample |
| TEGO® Airex 921 | Evonik Operations GmbH, BL Coating Additives | der siliconfreie Entlüfter für UV-härtende Druckfarben und Lacke auf Lebensmittelverpackungen | Request Sample |
| TEGO® Airex 922 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 922 is a highly compatible defoamer and deaerator concentrate for solventborne coatings. Supplied as a liquid, it's formulation is based on deaerating polymers and is very strong with solvent-free epoxy high-build coatings. TEGO® Airex 922 is ...weiterlesen TEGO® Airex 922 is a highly compatible defoamer and deaerator concentrate for solventborne coatings. Supplied as a liquid, it's formulation is based on deaerating polymers and is very strong with solvent-free epoxy high-build coatings. TEGO® Airex 922 is highly suitable for self-leveling floor coatings. It is also suitable for brush/roller applications, as well as airless and compressed air spraying. verkürzen | Request Sample |
| TEGO® Airex 923 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 923 is a silicone-free deaerator concentrate that provides outstanding compatibility. Fast and efficient foam breakdown. | Request Sample |
| TEGO® Airex 931 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 931 is a 4-Heptanone, 2,6-dimethyl-solution of a fluoro-silicone. It is universally used in solventborne formulations. It is also highly effective against macro-foam but still compatible. TEGO® Airex 931 is highly suitable for self-leveling fl...weiterlesen TEGO® Airex 931 is a 4-Heptanone, 2,6-dimethyl-solution of a fluoro-silicone. It is universally used in solventborne formulations. It is also highly effective against macro-foam but still compatible. TEGO® Airex 931 is highly suitable for self-leveling floor coating and compressed air spraying. It is also suitable for flexo/gravure printing, airless spraying, and brush and roller applications. verkürzen | Request Sample |
| TEGO® Airex 940 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 940 shows good compatability combined with effectiveness against both micro- and macro-foam. Ideally suited for high-solid and 2K solvent-free formulations. | Request Sample |
| TEGO® Airex 944 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 944 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 944 can b...weiterlesen TEGO® Airex 944 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 944 can be applied for wood and furniture coatings and floor coatings based on 2-pack polyurethane formulations and based on amine/amide-curing epoxides. verkürzen | Request Sample |
| TEGO® Airex 960 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 960 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It is used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 960 ca...weiterlesen TEGO® Airex 960 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It is used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 960 can be applied for wood and furniture coatings and floor coatings based on 2-pack polyurethane formulations and based on amine/amide-curing epoxides. verkürzen | Request Sample |
| TEGO® Airex 978 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 978 is a very strong deaerator concentrate that provides excellent effectiveness against micro- and macro-foam in solvent-borne, radiation-curing, and high-solids coatings and inks. Very suitable for high build and high viscosity applications. | Request Sample |
| TEGO® Airex 990 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 990 is a deaerator for solventborne coating formulations. It is used for industrial coatings, wood and furniture coatings, coatings for plastics, and leather top coats. TEGO® Airex 990 is highly suitable for high solids coatings formulations a...weiterlesen TEGO® Airex 990 is a deaerator for solventborne coating formulations. It is used for industrial coatings, wood and furniture coatings, coatings for plastics, and leather top coats. TEGO® Airex 990 is highly suitable for high solids coatings formulations as well as for solventborne and solvent-free formulations. It helps prevent pinholes and popping, is highly compatible, has good recoatability, and is highly suitable for clears. It is also suitable for alkyd and UV systems. verkürzen | Request Sample |
| TEGO® Airex 991 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 991 deaerator for solvent-free and solventborne coating formulation based on deaerating organic polymers, with tip of silicone. It is recommended for industrial coatings and 2-pack coatings based on epoxies and polyurethanes. TEGO® Airex 991 h...weiterlesen TEGO® Airex 991 deaerator for solvent-free and solventborne coating formulation based on deaerating organic polymers, with tip of silicone. It is recommended for industrial coatings and 2-pack coatings based on epoxies and polyurethanes. TEGO® Airex 991 has good recoatability, is highly effective, prevents micro- and macro-foam, and is used particularly for pigmented formulations. verkürzen | Request Sample |
| TEGO® Glide B 1484 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide B 1484 is a glide and flow additive with deaeration properties. It is a clear liquid polyether siloxane copolymer that is both recoatable and thermostable. TEGO® Glide B 1484 has good flow promotion in solvent-free and solventborne systems wit...weiterlesen TEGO® Glide B 1484 is a glide and flow additive with deaeration properties. It is a clear liquid polyether siloxane copolymer that is both recoatable and thermostable. TEGO® Glide B 1484 has good flow promotion in solvent-free and solventborne systems with deaerating properties. It also has good orientation of matting agents. This product can be added to the coating as supplied or as a predilution. Predilution in a suitable solvent simplifies the dosage and incorporation of TEGO® Glide B 1484. verkürzen | Request Sample |
| TEGO® Guard 9000 | Evonik Operations GmbH, BL Coating Additives | TEGO® Guard 9000 is an organically modified branched polysiloxane emulsion providing excellent quick-set properties. It is suitable for various decorative exterior paints. | Request Sample |
| TEGO® Rad 2500 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2500 is a radically crosslinkable glide, slip, and anti-blocking additive with good deaerating effects. It is a clear liquid silicone acrylate, radiation-curing defoaming additive which improves mechanical resistance and reduces friction. It is ...weiterlesen TEGO® Rad 2500 is a radically crosslinkable glide, slip, and anti-blocking additive with good deaerating effects. It is a clear liquid silicone acrylate, radiation-curing defoaming additive which improves mechanical resistance and reduces friction. It is especially suitable for pigmented formulations. TEGO® Rad 2500 can be added to the coating as supplied or as a predilution either in the grind stage or during the let-down stage. Predilution in a suitable solvent simplifies dosage and incorporation of this product. verkürzen | Request Sample |
| TEGO® Wet 505 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet 505 is a substrate wetting additive with defoaming properties. It is a highly dynamic, silicone-free, non-ionic, clear liquid organic surfactant. It is universally applicable, has low foam, and has good reduction of dynamic surface tension. TEGO...weiterlesen TEGO® Wet 505 is a substrate wetting additive with defoaming properties. It is a highly dynamic, silicone-free, non-ionic, clear liquid organic surfactant. It is universally applicable, has low foam, and has good reduction of dynamic surface tension. TEGO® Wet 505 is suitable for clear coat, pigmented, and waterborne systems. Addition of this product to the coating can be as supplied or as a predilution during the let-down stage. However, it is recommended the addition of TEGO® Wet 505 in pigmented formulations, be during the grind stage. verkürzen | Request Sample |
| TEGO® Wet KL 245 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet KL 245 is a highly active siloxane-based substrate-wetting additive. It shows very good substrate-wetting properties on difficult substrates like wood and plastic. It is highly compatible and recommended for waterborne and solvent-borne coatings...weiterlesen TEGO® Wet KL 245 is a highly active siloxane-based substrate-wetting additive. It shows very good substrate-wetting properties on difficult substrates like wood and plastic. It is highly compatible and recommended for waterborne and solvent-borne coatings. verkürzen | Request Sample |
| Venadol™ DF 110 L | Harcros Chemicals, Inc. | Venadol™ DF 110 L is a high performance, nonionic, molecular defoamer and deaerator. Venadol DF 110 L excels where effective defoaming or de-airentraining and foam elimination/prevention is necessary without causing surface defects. | |
| WorléeAdd 1200 | Worlée-Chemie G.m.b.H. | WorléeAdd 1200 ist ein synthetisches Wachs, das eine hervorragende Stabilität gegen Blankreiben bewirkt, sowie Oberflächenglätte, Wasserbeständigkeit und Kratzfestigkeit verbessert. | |
| WorléeAdd 311 (10% In Xylene) | Worlée-Chemie G.m.b.H. | W´Add 311 ist ein siliconhaltiges Lackhilfsmittel zur Erhöhung der Kratzfestigkeit und Oberflächenglätte, sowie zur Verbesserung des Verlaufs. | |
| WorléeAdd 311 (30% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 ist ein siliconhaltiges Lackhilfsmittel zur Erhöhung der Kratzfestigkeit und Oberflächenglätte, sowie zur Verbesserung des Verlaufs. | |
| WorléeAdd 312 | Worlée-Chemie G.m.b.H. | W´Add 312 ist ein silikonhaltiges Lackhilfsmittel zur Erhöhung von Kratzfestigkeit und Glätte, sowie zur Verbesserung des Verlaufs. Die Lieferform in Isopar H (Exxon) ermöglicht den Einsatz in aromatenfreien Systemen. | |
| WorléeAdd 315 | Worlée-Chemie G.m.b.H. | W´Add 315 ist ein wasserlösliches Silicon-Lackhilfsmittel, das schon bei niedriger Konzentration die Gleitfähigkeit und damit die Kratzfestigkeit wesentlich erhöht. Gleichzeitig werden Oberflächenstörungen wie z.B. Kraterbildung, Zellenstruktur etc. verhi...weiterlesen W´Add 315 ist ein wasserlösliches Silicon-Lackhilfsmittel, das schon bei niedriger Konzentration die Gleitfähigkeit und damit die Kratzfestigkeit wesentlich erhöht. Gleichzeitig werden Oberflächenstörungen wie z.B. Kraterbildung, Zellenstruktur etc. verhindert, das Ausschwimmen von Pigmenten vermieden und die Substratbenetzung sowie der Verlauf verbessert. W´Add 315 kann sowohl in lösemittelhaltigen als auch wasserverdünnbaren Lacken eingesetzt werden, ohne die Überlackierbarkeit zu verschlechte verkürzen | |
| WorléeAdd 327 | Worlée-Chemie G.m.b.H. | W´Add 327 ist ein Silicon-Lackhilfsmittel für den Einsatz in lösemittelhaltigen als auch wasserverdünnbaren Systemen zur Vermeidung von Oberflächenstörungen wie z.B. Kraterbildung, Orangenschaleneffekt und Fischaugen, zur Verbesserung des Glanzes, des Ver...weiterlesen W´Add 327 ist ein Silicon-Lackhilfsmittel für den Einsatz in lösemittelhaltigen als auch wasserverdünnbaren Systemen zur Vermeidung von Oberflächenstörungen wie z.B. Kraterbildung, Orangenschaleneffekt und Fischaugen, zur Verbesserung des Glanzes, des Verlaufs und der Benetzung bei schwierigen Untergründen wie z.B. Kunststoffen und Aluminiumfolie und zur Erhöhung der Kratzfestigkeit. Besonders bewährt hat sich die Zugabe von 0,2 % W´Add 327 in wasserverdünnbaren, hochglänzenden Decklacken auf Ba verkürzen | |
| WorléeAdd 356 | Worlée-Chemie G.m.b.H. | W´Add 356 ist ein multifunktionelles siliconhaltiges Additiv zur Verbesserung der Ober-flächeneigenschaften von lösemittelhaltigen luft- und ofentrocknenden Lacken unterschied-licher Zusammensetzung. | |
| WorléeAdd 371 | Worlée-Chemie G.m.b.H. | W´Add 371 ist ein siliconhaltiges, hochwirksames Antischaum- und Entlüftungsmittel für lösemittelhaltige Lack- und Druckfarben unterschiedlicher Zusammensetzung. | |
| WorléeAdd 373 N | Worlée-Chemie G.m.b.H. | W´Add 373 N ist ein siliconhaltiges Additiv zur Entschäumung von lösungs-mittelhaltigen luft- und ofentrocknenden Lacken. | |
| WorléeAdd 428 | Worlée-Chemie G.m.b.H. | W´Add 428 ist ein silikonfreies Additiv zur Herstellung von Coil-Coating- Strukturlacken. Die Ausbildung des sogenannten Spritznarbeneffektes wird allein durch den Zusatz von W´Add 428 erreicht, Wachszusätze sind nicht erforderlich. Gleichzeitig wird die ...weiterlesen W´Add 428 ist ein silikonfreies Additiv zur Herstellung von Coil-Coating- Strukturlacken. Die Ausbildung des sogenannten Spritznarbeneffektes wird allein durch den Zusatz von W´Add 428 erreicht, Wachszusätze sind nicht erforderlich. Gleichzeitig wird die Entlüftung gefördert. verkürzen | |
| WorléeAdd 602 | Worlée-Chemie G.m.b.H. | W´Add 602 ist ein Schaumverhinderer und Entschäumer vorwiegend für 2K-PURund Epoxidharzbeschichtungen. | |
| WorléeAdd 603 | Worlée-Chemie G.m.b.H. | W´Add 603 ist ein polyacrylatmodifizierter Silikonentschäumer, einsetzbar in lösemittelhaltigen und lösemittelfreien Beschichtungen unterschiedlicher Zusammensetzung. | |
| WorléeAdd 604 N | Worlée-Chemie G.m.b.H. | W´Add 604 N ist ein silikonhaltiger Schaumverhinderer und Entschäumer speziell für wasserverdünnbare Holz- und Parkettlacke auf Basis von Acryl- und/oder PUR-Dispersionen. W´Add 604 N zeigt gute Wirkung auf allen Oberflächen und gute Verträglichkeit mit v...weiterlesen W´Add 604 N ist ein silikonhaltiger Schaumverhinderer und Entschäumer speziell für wasserverdünnbare Holz- und Parkettlacke auf Basis von Acryl- und/oder PUR-Dispersionen. W´Add 604 N zeigt gute Wirkung auf allen Oberflächen und gute Verträglichkeit mit verschiedenen Emulsionspolymeren. verkürzen | |
| WorléeAdd 678 | Worlée-Chemie G.m.b.H. | W´Add 678 ist ein silikonfreier Schaumverhinderer und Entschäumer für lösemittelhaltige und -freie Systeme | |
| WorléeAdd 902 | Worlée-Chemie G.m.b.H. | W´Add 902 wird als Benzoinersatz zur Entgasung und Entlüftung von Epoxy-, Polyester-, Acrylharz-, Hybrid- und anderen Pulverlacksystemen, einschließlich Primid XL 552 (Ems/UCB) verwendet. W´Add 902 reduziert außerdem die Schmelzviskosität und verbessert d...weiterlesen W´Add 902 wird als Benzoinersatz zur Entgasung und Entlüftung von Epoxy-, Polyester-, Acrylharz-, Hybrid- und anderen Pulverlacksystemen, einschließlich Primid XL 552 (Ems/UCB) verwendet. W´Add 902 reduziert außerdem die Schmelzviskosität und verbessert die Pigmentdispergierung sowie den Verlauf und verhindert Nadelstiche. verkürzen | |
| WorléeAdd 904 | Worlée-Chemie G.m.b.H. | WorléeAdd 904 wird als Benzoinersatz zur Entgasung und Entlüftung von Epoxy-, Polyester-, Acrylharz-, Hybrid- und anderen Pulverlacksystemen, einschließlich Primid XL 552 (Ems/UCB) verwendet. WorléeAdd 904 reduziert außerdem die Schmelzviskosität und verb...weiterlesen WorléeAdd 904 wird als Benzoinersatz zur Entgasung und Entlüftung von Epoxy-, Polyester-, Acrylharz-, Hybrid- und anderen Pulverlacksystemen, einschließlich Primid XL 552 (Ems/UCB) verwendet. WorléeAdd 904 reduziert außerdem die Schmelzviskosität und verbessert die Pigmentdispergierung sowie den Verlauf und verhindert Nadelstiche. verkürzen | |
| WorléeAdd 915 | Worlée-Chemie G.m.b.H. | W´Add 915 ist ein Pulverlackadditiv, das die mechanischen Eigenschaften der Pulverlacke sowie das Aussehen der Oberflächen verbessert. |
