| Blendex Seal DH 70 | Ichemco | Blendex Seal DH 70 is a water-based, heat sealable adhesive based on modified acrylic polymers. This product has a total solids content of 23-25% and a Brookfield viscosity at 25°C of 8000-16,000 mPa.s. Blendex Seal DH 70 is most commonly used as a heat s...weiterlesen Blendex Seal DH 70 is a water-based, heat sealable adhesive based on modified acrylic polymers. This product has a total solids content of 23-25% and a Brookfield viscosity at 25°C of 8000-16,000 mPa.s. Blendex Seal DH 70 is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic leather applications. verkürzen | |
| Blendex Seal DH 76 | Ichemco | Blendex Seal DH 76 is a water-based, heat sealable adhesive, formulated with modified acrylic co-polymers.. This product has a total solids content of 37.5-39.5% and a Brookfield viscosity at 25°C of 1000-1500 mPa.s. Blendex Seal DH 76 is most commonly us...weiterlesen Blendex Seal DH 76 is a water-based, heat sealable adhesive, formulated with modified acrylic co-polymers.. This product has a total solids content of 37.5-39.5% and a Brookfield viscosity at 25°C of 1000-1500 mPa.s. Blendex Seal DH 76 is most commonly used as a heat sealable elastic adhesive in woven, non-woven, leather, foam, and synthetic leather applications. verkürzen | |
| Blendex Seal DH 8 | Ichemco | Blendex Seal DH 8 is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 52-54%, and a Brookfield viscosity at 25°C of 2000-5000 mPa.s. Blendex Seal DH 8 is most commonly used as a heat s...weiterlesen Blendex Seal DH 8 is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 52-54%, and a Brookfield viscosity at 25°C of 2000-5000 mPa.s. Blendex Seal DH 8 is most commonly used as a heat sealable adhesive in fabric, leather, foam, non-woven, and synthetic leather applications. verkürzen | |
| Blendex Seal DH 8 M | Ichemco | Blendex Seal DH 8 M is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 3000-6500 mPa.s. Blendex Seal DH 8 M is most commonly used as a heat ...weiterlesen Blendex Seal DH 8 M is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 3000-6500 mPa.s. Blendex Seal DH 8 M is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic leather applications. verkürzen | |
| Blendex Seal DH 8 M (V2) | Ichemco | Blendex Seal DH 8 M (V2) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Blendex Seal DH 8 M (V2) is most commonly used as a heat sealable adhesive in f...weiterlesen Blendex Seal DH 8 M (V2) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Blendex Seal DH 8 M (V2) is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic leather applications. verkürzen | |
| Blendex Seal DH 8 M (V3) | Ichemco | Blendex Seal DH 8 M (V3) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 27,000-37,000 mPa.s. Blendex Seal DH 8 M (V3) is most commonly used as a heat sealable adhesive in f...weiterlesen Blendex Seal DH 8 M (V3) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 27,000-37,000 mPa.s. Blendex Seal DH 8 M (V3) is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic leather applications. verkürzen | |
| Crestabond® M1-04 | Scott Bader | Crestabond® M1-04 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...weiterlesen Crestabond® M1-04 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. verkürzen | |
| Crestabond® M1-05 | Scott Bader | Crestabond® M1-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...weiterlesen Crestabond® M1-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. verkürzen | |
| Crestabond® M1-20 | Scott Bader | Crestabond® M1-20 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...weiterlesen Crestabond® M1-20 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. verkürzen | |
| Crestabond® M1-30 | Scott Bader | Crestabond® M1-30 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...weiterlesen Crestabond® M1-30 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. verkürzen | |
| Crestabond® M1-60 | Scott Bader | Crestabond® M1-60 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...weiterlesen Crestabond® M1-60 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. verkürzen | |
| Crestabond® M1-90 | Scott Bader | Crestabond® M1-90 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...weiterlesen Crestabond® M1-90 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. verkürzen | |
| Crestabond® M7-05 | Scott Bader | Crestabond® M7-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...weiterlesen Crestabond® M7-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. verkürzen | |
| Crestabond® M7-15 | Scott Bader | Crestabond® M7-15 is a primerless two component acrylic adhesive designed for bonding compoisites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstratin...weiterlesen Crestabond® M7-15 is a primerless two component acrylic adhesive designed for bonding compoisites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. verkürzen | |
| Crestomer® 1150PA | Scott Bader | Crestomer® 1150PA is a highly thixotropic structural adhesive that is pre-accelerated and based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion and high elongation at break, shows no sagging on vertical surfaces and has good...weiterlesen Crestomer® 1150PA is a highly thixotropic structural adhesive that is pre-accelerated and based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion and high elongation at break, shows no sagging on vertical surfaces and has good fatigue and impact resistance properties. Crestomer® 1150PA is mostly used in structural composite applications and has good adhesion to FRP laminates, wood and some metals as well as core materials. Crestomer® 1150PA can be used for bonding diesel tanks and contour joints in FRP components. verkürzen | |
| Crestomer® 1151A | Scott Bader | Crestomer® 1151A is a structural adhesive and filleting compound that is fast curing, non-sagging and bonds a variety of substrates with little surface preparation. It has a lower odor than other competing structural adhesives and is based on innovative u...weiterlesen Crestomer® 1151A is a structural adhesive and filleting compound that is fast curing, non-sagging and bonds a variety of substrates with little surface preparation. It has a lower odor than other competing structural adhesives and is based on innovative urethane acrylate technology. Crestomer® 1151A shows good impact strength and toughness as well as exhibiting good adhesion and gap filling properties that enables the user greater flexibility in design, saving time and money. The adhesive is especially formulated for use in bulk metering systems. verkürzen | |
| Crestomer® 1152PA | Scott Bader | Crestomer® 1152PA is a two part pre-accelerated structural adhesive that is highly thixotropic and is based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion to core materials, wood, FRP laminates and some metals and because o...weiterlesen Crestomer® 1152PA is a two part pre-accelerated structural adhesive that is highly thixotropic and is based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion to core materials, wood, FRP laminates and some metals and because of its good adhesion properties, Crestomer® 1152PA can be recommended for use as a general purpose adhesive. It can also be used to bond contour joints in FRP components, to bond diesel tanks as well as bonding damaged areas or "green" FRP. verkürzen | |
| Crestomer® 1153PA | Scott Bader | Crestomer® 1153PA is a structural adhesive that is highly thixotropic and derived from unsaturated urethane acrylate in styrene monomer. The adhesive has a long open time of 90 minutes and shows good adhesion to core materials, metals, wood and FRP lamina...weiterlesen Crestomer® 1153PA is a structural adhesive that is highly thixotropic and derived from unsaturated urethane acrylate in styrene monomer. The adhesive has a long open time of 90 minutes and shows good adhesion to core materials, metals, wood and FRP laminates. Because of its good adhesion properties, Crestomer® 1153PA is ideal for use as a general purpose adhesive. The adhesive is also used to contour joints in FRP components, to bond "green" FRP and to build up damaged areas. Crestomer® 1153PA is mainly used in structural composite applications. verkürzen | |
| Crestomer® 1186PA | Scott Bader | Crestomer® 1186PA is a structural adhesive from unique unsaturated urethane acrylate that shows resistance to crack propagation, toughness and good impact strength. It displays good adhesion to a variety of metals, polymeric materials and ceramics and off...weiterlesen Crestomer® 1186PA is a structural adhesive from unique unsaturated urethane acrylate that shows resistance to crack propagation, toughness and good impact strength. It displays good adhesion to a variety of metals, polymeric materials and ceramics and offers structural adhesion even when bonding FRP laminates with a 30mm thick bondline. The multi-purpose gap filling structural adhesive is used in a variety of FRP applications. verkürzen | |
| Crestomer® 1196PA | Scott Bader | Crestomer® 1196PA is a low denisty core bonding structural adhesive based on unique urethane acrylate technology that displays outstanding strength and toughness. The adhesive is designed to bond core materials like balsa and rigid PVC foam to semi-cured ...weiterlesen Crestomer® 1196PA is a low denisty core bonding structural adhesive based on unique urethane acrylate technology that displays outstanding strength and toughness. The adhesive is designed to bond core materials like balsa and rigid PVC foam to semi-cured or cured FRP skins. It also displays a tougher and more durable structural bond than a polyester bonding adhesive or a polyester resin/glass structure. Crestomer® 1196PA also exhibits reduced styrene emissions, great weight savings and more improved cosmetics with the ridding of core print through. Crestomer® 1196PA is suited for use in sandwich construction where the needs are for a high impact-resistant, strong and tough structure. verkürzen | |
| Crestomer® Advantage 30 | Scott Bader | Crestomer® Advantage 30 is a structural adhesive that is white in color and bonds with a variety of substrates with less surface preparation and a lower odor than competitive materials. It has a quick gel time of 30 minutes and bonded parts can be used in...weiterlesen Crestomer® Advantage 30 is a structural adhesive that is white in color and bonds with a variety of substrates with less surface preparation and a lower odor than competitive materials. It has a quick gel time of 30 minutes and bonded parts can be used in 2 hours and 20 minutes. It is based on unique urethane acrylate technology and displays good impact strength and toughness. With the strong adhesion and gap filling qualities shown by Crestomer® Advantage 30, great flexibility in design is offered, along with time and cost savings. verkürzen | |
| Crystic® BP 621CC 30 | Scott Bader | Crystic® BP 621CC 30 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound i...weiterlesen Crystic® BP 621CC 30 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. verkürzen | |
| Crystic® BP 621CC 45 | Scott Bader | Crystic® BP 621CC 45 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound i...weiterlesen Crystic® BP 621CC 45 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. verkürzen | |
| Crystic® BP 621CC 65 | Scott Bader | Crystic® BP 621CC 65 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound i...weiterlesen Crystic® BP 621CC 65 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. verkürzen | |
| Crystic® BP 621CC White 20 | Scott Bader | Crystic® BP 621CC White 20 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste with a final product colour of white. It offers high shear strength for bonded joints, eliminating the need for mechanical f...weiterlesen Crystic® BP 621CC White 20 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste with a final product colour of white. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. verkürzen | |
| Mowinyl 461 | Nippon Gohsei | Mowinyl 461 is a synthetic acrylic resin emulsion that provides good adhesion, high tack, and good retention for olefins. This product is well suited for use in film- and paper-type adhesive label and tape applications. | |
| Mowinyl 462 | Nippon Gohsei | Mowinyl 462 is a synthetic acrylic resin emulsion that provides good adhesion, high tack, and good retention for olefins. This product is well suited for use in film- and paper-type adhesive label and tape applications. | |
| Mowinyl 490 | Nippon Gohsei | Mowinyl 490 is a synthetic acrylic resin emulsion that features good adhesion, high tack, and a transparent starch type. This product is well suited for use in adhesive film sheet and tape applications. | |
| Mowinyl 7980 | Nippon Gohsei | Mowinyl 7980 is a synthetic acrylic resin emulsion that provides good heat sealing properties, transparency, and adhesion to plastics. This product is well suited for use in film and label adhesive applications. | |
| Mowinyl 987B | Nippon Gohsei | Mowinyl 987B is a synthetic acrylic resin emulsion that provides good adhesion to heat-resistant and water-resistant materials. This product is well suited for use in aluminum foil and paper laminate applications. | |
| Mowinyl S-71 | Nippon Gohsei | Mowinyl S-71 is a synthetic acrylic resin emulsion that functions as water-swelling adhesive agent and provides good adhesion and retention properties. This product is well suited for use in a variety of adhesive applications, including films, labels, dou...weiterlesen Mowinyl S-71 is a synthetic acrylic resin emulsion that functions as water-swelling adhesive agent and provides good adhesion and retention properties. This product is well suited for use in a variety of adhesive applications, including films, labels, double-sided tape, medical tape, and textiles. verkürzen | |
| Tackwhite A 305 SL | Ichemco | Tackwhite A 305 SL is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion. Tackwhite A 305 SL is most commonly used in permanent paper label applications where a high...weiterlesen Tackwhite A 305 SL is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion. Tackwhite A 305 SL is most commonly used in permanent paper label applications where a higher adhesive power is required. verkürzen | |
| Tackwhite A 305 SL (V2) | Ichemco | Tackwhite A 305 SL (V2) is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion.Tackwhite A 305 SL (V2) is most commonly used in permanent paper label applications wh...weiterlesen Tackwhite A 305 SL (V2) is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion.Tackwhite A 305 SL (V2) is most commonly used in permanent paper label applications where a higher adhesive power is required. verkürzen | |
| Tackwhite A 305 SL (V3) | Ichemco | Tackwhite A 305 SL (V3) is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion. Tackwhite A 305 SL (V3) is most commonly used in permanent paper label applications w...weiterlesen Tackwhite A 305 SL (V3) is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion. Tackwhite A 305 SL (V3) is most commonly used in permanent paper label applications where a higher adhesive power is required. verkürzen | |
| Tackwhite A 33 | Ichemco | Tackwhite A 33 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 200-400 mPa.s. Tackwhite A 33 is most commonly used in transparent label, transparent tape, and li...weiterlesen Tackwhite A 33 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 200-400 mPa.s. Tackwhite A 33 is most commonly used in transparent label, transparent tape, and light-resistant pressure sensitive article applications. verkürzen | |
| Tackwhite A 33 (V1) | Ichemco | Tackwhite A 33 (V1) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 12,000-22,000 mPa.s. Tackwhite A 33 (V1) is most commonly used in transparent label, transpar...weiterlesen Tackwhite A 33 (V1) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 12,000-22,000 mPa.s. Tackwhite A 33 (V1) is most commonly used in transparent label, transparent tape, and light-resistant pressure sensitive article applications. verkürzen | |
| Tackwhite A 33 (V2) | Ichemco | Tackwhite A 33 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 33 (V2) is most commonly used in transparent label, transpar...weiterlesen Tackwhite A 33 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 33 (V2) is most commonly used in transparent label, transparent tape, and light-resistant pressure sensitive article applications. verkürzen | |
| Tackwhite A 38 | Ichemco | Tackwhite A 38 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 47-49%, a tack of 2-6 cm, and a peel of 900-1200 g/in. Tackwhite A 38 is most commonly used in wash removable label applications. | |
| Tackwhite A 4 MED | Ichemco | Tackwhite A 4 MED is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 200-800 mPa.s. Tackwhite A 4 MED is most commonly used in pressure sensitive article applicatio...weiterlesen Tackwhite A 4 MED is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 200-800 mPa.s. Tackwhite A 4 MED is most commonly used in pressure sensitive article applications where higher tack, adhesion, water-resistance, and cold-resistance properties are required. verkürzen | |
| Tackwhite A 4 MED (V2) | Ichemco | Tackwhite A 4 MED (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 4 MED (V2) is most commonly used in pressure sensitive ar...weiterlesen Tackwhite A 4 MED (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 4 MED (V2) is most commonly used in pressure sensitive article applications where higher tack, adhesion, water-resistance, and cold-resistance properties are required. verkürzen | |
| Tackwhite A 62 SF | Ichemco | Tackwhite A 62 SF is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of 150-500. Tackwhite A 62 SF is most commonly used in paper and plastic permanent label, as well ...weiterlesen Tackwhite A 62 SF is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of 150-500. Tackwhite A 62 SF is most commonly used in paper and plastic permanent label, as well as double-sided tape production applications. verkürzen | |
| Tackwhite A 62 SF (V2) | Ichemco | Tackwhite A 62 SF (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 62 SF (V2) is most commonly used in paper and plastic per...weiterlesen Tackwhite A 62 SF (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 62 SF (V2) is most commonly used in paper and plastic permanent label, as well as double-sided tape production applications. verkürzen | |
| Tackwhite A 62 SF2 | Ichemco | Tackwhite A 62 SF2 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Tackwhite A 62 SF2 is most commonly used in permanent paper and film label, as...weiterlesen Tackwhite A 62 SF2 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Tackwhite A 62 SF2 is most commonly used in permanent paper and film label, as well as double-sided tape applications. verkürzen | |
| Tackwhite A 62 SF2 (V2) | Ichemco | Tackwhite A 62 SF2 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 62 SF2 (V2) is most commonly used in permanent paper and...weiterlesen Tackwhite A 62 SF2 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 62 SF2 (V2) is most commonly used in permanent paper and film label, as well as double-sided tape applications. verkürzen | |
| Tackwhite A 65 | Ichemco | Tackwhite A 65 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 49-51% of less than 400 mPa.s. Tackwhite A 65 is most commonly used in pressure sensitive packaging production and office tape on BOPP film app...weiterlesen Tackwhite A 65 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 49-51% of less than 400 mPa.s. Tackwhite A 65 is most commonly used in pressure sensitive packaging production and office tape on BOPP film applications. verkürzen | |
| Tackwhite A 65 (V2) | Ichemco | Tackwhite A 65 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 49-51% of less than 17,000-27,000 mPa.s. Tackwhite A 65 (V2) is most commonly used in pressure sensitive packaging production and office t...weiterlesen Tackwhite A 65 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 49-51% of less than 17,000-27,000 mPa.s. Tackwhite A 65 (V2) is most commonly used in pressure sensitive packaging production and office tape on BOPP film applications. verkürzen | |
| Tackwhite A 76 D | Ichemco | Tackwhite A 76 D is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52%, a tack of 5-10 cm, and a peel of 1000-5000 g/in. Tackwhite A 76 D is most commonly used in permanent paper and film label production ...weiterlesen Tackwhite A 76 D is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52%, a tack of 5-10 cm, and a peel of 1000-5000 g/in. Tackwhite A 76 D is most commonly used in permanent paper and film label production applications. verkürzen | |
| Tackwhite A 77 | Ichemco | Tackwhite A 77 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 61-63% as a Brookfield viscosity at 25°C of 500-3000 mPa.s. Tackwhite A 77 is most commonly used in permanent paper and film label production a...weiterlesen Tackwhite A 77 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 61-63% as a Brookfield viscosity at 25°C of 500-3000 mPa.s. Tackwhite A 77 is most commonly used in permanent paper and film label production applications. verkürzen | |
| Tackwhite A 80 FR | Ichemco | Tackwhite A 80 FR is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 52-56%, a tack of 5 cm, and a peel of 400 g/in. Tackwhite A 80 FR is most commonly used as a fire retardant in film coating applications. | |
| Tackwhite A 90 | Ichemco | Tackwhite A 90 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 63-67% as a Brookfield viscosity at 25°C of 500-2000 mPa.s. Tackwhite A 90 is most commonly used in the production of permanent labels meant to...weiterlesen Tackwhite A 90 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 63-67% as a Brookfield viscosity at 25°C of 500-2000 mPa.s. Tackwhite A 90 is most commonly used in the production of permanent labels meant to be applied to rough surfaces. verkürzen | |
| Tackwhite A5 MED | Ichemco | Tackwhite A5 MED is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 47-49% as a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A5 MED is most commonly used pressure sensitive article production...weiterlesen Tackwhite A5 MED is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 47-49% as a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A5 MED is most commonly used pressure sensitive article production where high adhesion, water resistance, and cold resistance are required. verkürzen | |
| Tackwhite AMC 2 | Ichemco | Tackwhite AMC 2 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 41-43% as a Brookfield viscosity at 25°C of 50-250 mPa.s. Tackwhite AMC 2 is most commonly used in removable and replaceable paper and film la...weiterlesen Tackwhite AMC 2 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 41-43% as a Brookfield viscosity at 25°C of 50-250 mPa.s. Tackwhite AMC 2 is most commonly used in removable and replaceable paper and film label production applications. verkürzen | |
| Tackwhite AMC 21 | Ichemco | Tackwhite AMC 21 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 44-46%. Tackwhite AMC 21 is most commonly used in removable and repositionable polypropylene label and film production applications. | |
| Tackwhite AMC 23 | Ichemco | Tackwhite AMC 23 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 37-39% and a Brookfield viscosity at 25°C of less than 1000 mPa.s. Tackwhite AMC 23 is most commonly used in removable and repositionable pol...weiterlesen Tackwhite AMC 23 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 37-39% and a Brookfield viscosity at 25°C of less than 1000 mPa.s. Tackwhite AMC 23 is most commonly used in removable and repositionable polypropylene label and film production applications. verkürzen | |
| Tackwhite AMC 3 D | Ichemco | Tackwhite AMC 3 D is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 40-42%, a tack of 10-20 cm, and a peel of 150-250 g/in. Tackwhite AMC 3 D is most commonly used in removable and repositionable PVC label ...weiterlesen Tackwhite AMC 3 D is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 40-42%, a tack of 10-20 cm, and a peel of 150-250 g/in. Tackwhite AMC 3 D is most commonly used in removable and repositionable PVC label production applications. verkürzen | |
| Tackwhite AMC 3 DS | Ichemco | Tackwhite AMC 3 DS is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 39-41% as a Brookfield viscosity at 25°C of 800-1000 mPa.s. Tackwhite AMC 3 DS is most commonly used in removable and replaceable PVC label...weiterlesen Tackwhite AMC 3 DS is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 39-41% as a Brookfield viscosity at 25°C of 800-1000 mPa.s. Tackwhite AMC 3 DS is most commonly used in removable and replaceable PVC label production applications. verkürzen | |
| Tackwhite AMC 4 D | Ichemco | Tackwhite AMC 4 D is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 46-48% as a Brookfield viscosity at 25°C of 500-1000 mPa.s. Tackwhite AMC 4 D is most commonly used in removable and replaceable PVC label p...weiterlesen Tackwhite AMC 4 D is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 46-48% as a Brookfield viscosity at 25°C of 500-1000 mPa.s. Tackwhite AMC 4 D is most commonly used in removable and replaceable PVC label production applications. verkürzen | |
| Tackwhite AP 03 HP | Ichemco | Tackwhite AP 03 HP is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52%, a tack of 6-12 cm, and a peel of 1300-1600 g/in. Tackwhite AP 03 HP is most commonly used in protective polyethylene film productio...weiterlesen Tackwhite AP 03 HP is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52%, a tack of 6-12 cm, and a peel of 1300-1600 g/in. Tackwhite AP 03 HP is most commonly used in protective polyethylene film production applications. verkürzen | |
| Tackwhite AP 15 | Ichemco | Tackwhite AP 15 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 45-47%, a tack of 8-15 cm, and a peel of 500-1000 g/in. Tackwhite AP 15 is most commonly used in protective polyethylene film production appli...weiterlesen Tackwhite AP 15 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 45-47%, a tack of 8-15 cm, and a peel of 500-1000 g/in. Tackwhite AP 15 is most commonly used in protective polyethylene film production applications. verkürzen | |
| Tackwhite AP 15 M | Ichemco | Tackwhite AP 15 M is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 43-47%, a tack of 8-15 cm, and a peel of 500-1000 g/in. Tackwhite AP 15 M is most commonly used in protective polyethylene film production a...weiterlesen Tackwhite AP 15 M is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 43-47%, a tack of 8-15 cm, and a peel of 500-1000 g/in. Tackwhite AP 15 M is most commonly used in protective polyethylene film production applications. verkürzen | |
| Tackwhite AP 5 | Ichemco | Tackwhite AP 5 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52%, a tack of 8 cm, and a peel of 180 g/in. Tackwhite AP 5 is most commonly used in the production of removable PSA tapes with low peel adh...weiterlesen Tackwhite AP 5 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52%, a tack of 8 cm, and a peel of 180 g/in. Tackwhite AP 5 is most commonly used in the production of removable PSA tapes with low peel adhesion. verkürzen | |
| Tackwhite AP 5 M | Ichemco | Tackwhite AP 5 M is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50%, a tack of 6-10 cm, and a peel of 300-600 g/in. Tackwhite AP 5 M is most commonly used in food-grade removable label and removable PSA...weiterlesen Tackwhite AP 5 M is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50%, a tack of 6-10 cm, and a peel of 300-600 g/in. Tackwhite AP 5 M is most commonly used in food-grade removable label and removable PSA tape with low peel adhesion production applications. verkürzen | |
| Tackwhite AR 35 | Ichemco | Tackwhite AR 35 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 51-53% as a Brookfield viscosity at 25°C of 200-300 mPa.s. Tackwhite AR 35 is most commonly used in removable PVC, PE, and BOPP label producti...weiterlesen Tackwhite AR 35 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 51-53% as a Brookfield viscosity at 25°C of 200-300 mPa.s. Tackwhite AR 35 is most commonly used in removable PVC, PE, and BOPP label production applications. verkürzen | |
| Tackwhite AR 51 (V2) | Ichemco | Tackwhite AR 51 (V2) is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 47-49% as a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite AR 51 (V2) is most commonly used in removable plastic and pape...weiterlesen Tackwhite AR 51 (V2) is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 47-49% as a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite AR 51 (V2) is most commonly used in removable plastic and paper label production applications. verkürzen | |
| Tackwhite CR 72 HV | Ichemco | Tackwhite CR 72 HV is a low Tg (-58°C) pure Acrylic polymer emulsion that forms clear, elastic, tacky films when dried. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 18,000-25,000. Tackwhite CR 72 HV is most com...weiterlesen Tackwhite CR 72 HV is a low Tg (-58°C) pure Acrylic polymer emulsion that forms clear, elastic, tacky films when dried. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 18,000-25,000. Tackwhite CR 72 HV is most commonly used in the production of pressure sensitive adhesives made for deep freeze applications. verkürzen | |
| Tackwhite HT 200 NC | Ichemco | Tackwhite HT 200 NC is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52%, a tack of 7 cm, and a peel of 700 g/in. Tackwhite HT 200 NC is most commonly used in double-sided tape and tape applications where...weiterlesen Tackwhite HT 200 NC is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52%, a tack of 7 cm, and a peel of 700 g/in. Tackwhite HT 200 NC is most commonly used in double-sided tape and tape applications where the tape must be removed without adhesive transfer on the contact surface. verkürzen | |
| Tackwhite NA 1 | Ichemco | Tackwhite NA 1 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 200-800 mPa.s. Tackwhite NA 1 is most commonly used as a protective material for plastic sheet, de...weiterlesen Tackwhite NA 1 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 200-800 mPa.s. Tackwhite NA 1 is most commonly used as a protective material for plastic sheet, decorative laminate, and ceramic applications. verkürzen | |
| Tackwhite NA 1 (V1) | Ichemco | Tackwhite NA 1 (V1) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 12,000-22,000 mPa.s. Tackwhite NA 1 (V1) is most commonly used as a protective material for p...weiterlesen Tackwhite NA 1 (V1) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 12,000-22,000 mPa.s. Tackwhite NA 1 (V1) is most commonly used as a protective material for plastic sheet, decorative laminate, and ceramic applications. verkürzen | |
| Tackwhite NA 1 (V2) | Ichemco | Tackwhite NA 1 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite NA 1 (V2) is most commonly used as a protective material for p...weiterlesen Tackwhite NA 1 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite NA 1 (V2) is most commonly used as a protective material for plastic sheet, decorative laminate, and ceramic applications. verkürzen | |
| Tackwhite NA 1/V | Ichemco | Tackwhite NA 1/V is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 900-1900 mPa.s. Tackwhite NA 1/V is most commonly used as a protective material for plastic shee...weiterlesen Tackwhite NA 1/V is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 900-1900 mPa.s. Tackwhite NA 1/V is most commonly used as a protective material for plastic sheet, decorative laminate, and ceramic applications. verkürzen | |
| Tackwhite NA 55 | Ichemco | Tackwhite NA 55 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 49-51% as a Brookfield viscosity at 25°C of less than 500 mPa.s. Tackwhite NA 55 is most commonly used in protective polyethylene film product...weiterlesen Tackwhite NA 55 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 49-51% as a Brookfield viscosity at 25°C of less than 500 mPa.s. Tackwhite NA 55 is most commonly used in protective polyethylene film production applications. verkürzen |
