UL Prospector
Prospector

Erfolg!

Ihre Suche wurde erfolgreich gespeichert
114 Ergebnisse
4962-M-75 Rosin Modified Epoxy Ester Resin Gabriel Performance Products 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasi...weiterlesen 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasion resistance. Uses include trade sale and industrial primers/sealers, block fillers, floor finishes, and direct to metal maintenance finishes. verkürzen
Abiester 90 Spolchemie Abiester 90 is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and glycerin. Abiester 90 is primarily used for coatings, hot melt adhesives and is also used in printing inks.
Abifen 125 D Spolchemie Abifen 125 D is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and phenol-formaldehyde. Abifen 125 D is primarily used for coatings, adhesives and it also can be used in rub...weiterlesen Abifen 125 D is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and phenol-formaldehyde. Abifen 125 D is primarily used for coatings, adhesives and it also can be used in rubber mixtures. verkürzen
Abimal 125 Spolchemie Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It al...weiterlesen Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It also provides weather resistance and gloss finish. verkürzen
Burez® DRS P80 E Lawter Burez® DRS P80 E is a potassium soap of disproportionated rosin with 80% solids and has as its main application as an emulsifier in emulsion polymerization. The rosin soap is part of the Burez® range of products that is also designed for wet glue formulat...weiterlesen Burez® DRS P80 E is a potassium soap of disproportionated rosin with 80% solids and has as its main application as an emulsifier in emulsion polymerization. The rosin soap is part of the Burez® range of products that is also designed for wet glue formulations and organic pigment production, with applications in pigment coatings and adhesives. verkürzen
Burez® DRS S70 E Lawter Burez® DRS S70 E is a rosin soap with 70% solids content and is a sodium soap of disproportionated rosin. Its main application is as an emulsifier in emulsion polymerization. The rosin soap is part of the Burez® range of products that is also designed fo...weiterlesen Burez® DRS S70 E is a rosin soap with 70% solids content and is a sodium soap of disproportionated rosin. Its main application is as an emulsifier in emulsion polymerization. The rosin soap is part of the Burez® range of products that is also designed for wet glue formulations and organic pigment production, with applications in pigment coatings and adhesives. verkürzen
Burez® NA45 E Lawter Burez® NA45 E is a sodium soap of modified rosin that has been stabilized to prevent crystallization. Its main application is its use in bottle labeling adhesives. The Burez® range of products is designed for emulsion polymerization, wet glue formulations...weiterlesen Burez® NA45 E is a sodium soap of modified rosin that has been stabilized to prevent crystallization. Its main application is its use in bottle labeling adhesives. The Burez® range of products is designed for emulsion polymerization, wet glue formulations and organic pigment production. verkürzen
DERMULSENE RA 702 DRT DERMULSENE RA 702 is an aqueous, solvent free resin based on stabilized rosin. It is recommended for contact adhesives, building and industrial adhesives.
Disvipol-203 D.S.V. Chemicals Pvt. Ltd. Disvipol-203 is a rosin derivative. This product has been modified with phenolic compounds. It can be used in anticorrosive paints, marine finishes, sealants, primers, insulating varnishes, and oil varnishes.
Disvipol-252 D.S.V. Chemicals Pvt. Ltd. Disvipol-252 is a phenolic resin. This product has high purity, is oil-resistant, and is compatible with neoprene rubber solutions. It can be used in flexogravure inks, spirit varnishes, traffic paints, and adhesives.
Estergum-751 D.S.V. Chemicals Pvt. Ltd. Estergum-751 is an esterified rosin derivative. This product derives from penta polyols. It can be used in primers, undercoats, adhesives, and nitrocellulose lacquers.
Estergum-752 D.S.V. Chemicals Pvt. Ltd. Estergum-752 is an esterified rosin derivative. This product derives from glycerine polyols. It can be used in adhesives and wax systems in hot melt adhesives. Estergum-752 is compatible with vinyl copolymers that are used in synthetic floor tile adhes...weiterlesen Estergum-752 is an esterified rosin derivative. This product derives from glycerine polyols. It can be used in adhesives and wax systems in hot melt adhesives. Estergum-752 is compatible with vinyl copolymers that are used in synthetic floor tile adhesives. verkürzen
Flytac 102-100 Guangzhou Flying Dragon Chemical Ltd. Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...weiterlesen Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR. This product has a colour gardener (in 50% Toluene) of 4 max., an acid value of 20mg KOH/g max., and a softening point (R&B) of 97-100℃. verkürzen
FLYTAC 103-85 Guangzhou Flying Dragon Chemical Ltd. A slight yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol, it has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS,...weiterlesen A slight yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol, it has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. verkürzen
Flytac 103-E Guangzhou Flying Dragon Chemical Ltd. Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for thi...weiterlesen Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for this product include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It an also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. Flytac 103-E has a softening point (R&B) of 82-90°C min., an acid value of 3-8mg KOH/g max., and a colour gardener (in 50% Toluene) of 8 max. verkürzen
Flytac 105-L Guangzhou Flying Dragon Chemical Ltd. Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In...weiterlesen Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. Flytac105-L has a softening point (R&B) of 85°C, an acid value of 9mg KOH/g max., and an ash content of 0.2% max. verkürzen
Flytac 106-100 Guangzhou Flying Dragon Chemical Ltd. Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesiv...weiterlesen Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. Flytac 106-100 has a color gardener of 8~10, a specific gravity (25°C/25°C) of 1.060~1.090, and a softening point (R&B) of 95-102°C min. verkürzen
Flytac 106-100L Guangzhou Flying Dragon Chemical Ltd. Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesi...weiterlesen Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. This product has a color gardener of 4~6, a softening point (R&B) of 95-102°C, and a specific gravity (25°C/25°C) of 1.060~1.090. verkürzen
Flytac 107 Guangzhou Flying Dragon Chemical Ltd. Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important com...weiterlesen Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important component for making potassium soaps. This product has a dehydrated acid content of 52.0% min., an unsaponifiable material of 10.0% max., and an abietic acid of 1% max. verkürzen
Flytac 111-101 Guangzhou Flying Dragon Chemical Ltd. Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...weiterlesen Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-101 has a tetrahydro resin acid of 10.0% min., an abietic acid of 2.0% max., and a dehydroabietic acid of 10.0% max. verkürzen
Flytac 111-301 Guangzhou Flying Dragon Chemical Ltd. Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...weiterlesen Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-301 has an abietic acid of 0-0.1% max., a softening point (R&B) of 78°C, and a tetrahydro resin acid level of 30.0-40.0%. verkürzen
Flytac 115 Guangzhou Flying Dragon Chemical Ltd. Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives pr...weiterlesen Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives properties, and is compatible with anionic & nonionic types of latexes. It adheres to a wide range of substrates. This product has a viscosity ((Brookifield 2#, 60rpm, 25°C,cps) PH(25°C)) of 150 max, a particle size (AVG) of 0.25μm, and a density (25°C) of 1.02g/ml. verkürzen
Flytac 116-110 Guangzhou Flying Dragon Chemical Ltd. Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg K...weiterlesen Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg KOH/g, a softening point (R&B) of 110± 5°C, and a color gardner (50% Benzene solution) of 5 max. verkürzen
Flytac 116-130 Guangzhou Flying Dragon Chemical Ltd. Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180...weiterlesen Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180 ± 10mg KOH/g, a softening point (R&B) of 130 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. verkürzen
Flytac 116-150 Guangzhou Flying Dragon Chemical Ltd. Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg ...weiterlesen Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg KOH/g, a softening point (R&B) of 150 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. verkürzen
Flytac 116-160 Guangzhou Flying Dragon Chemical Ltd. Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg ...weiterlesen Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg KOH/g, a softening point (R&B) of 160 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. verkürzen
FLYTAC 120-100W Guangzhou Flying Dragon Chemical Ltd. A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...weiterlesen A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. verkürzen
FLYTAC 120-90W Guangzhou Flying Dragon Chemical Ltd. A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...weiterlesen A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. verkürzen
Flytac102-100F Guangzhou Flying Dragon Chemical Ltd. Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...weiterlesen Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, Pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR.This product has a melt viscosity (CPS at 150°C) of 850-1300, a softening point (R&B) of 97-103°C, and a specific gravity (25°C/25°C) of 1.060~1.090. verkürzen
Flytac103-90 Guangzhou Flying Dragon Chemical Ltd. Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses...weiterlesen Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. This product has a colour gardener (in 50% Toleune) of 3 max., an acid value of 10mg KOH/g max., and a softening point (R&B) of 87-92°C min. verkürzen
Flytac105-E Guangzhou Flying Dragon Chemical Ltd. Flytac105-E is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-ox...weiterlesen Flytac105-E is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. This product is ideally used for wax modification, waterborne adhesives, tapes and labels, solventborne adhesives, rubber and plastic modification, and paint and coatings. Flytac105-E has a softening point (R&B) of 78-88°C min., a specific gravity (25°C/25°C) of 1.060~1.090, and an ash content of 0.1% max. verkürzen
GLYCEROL ESTER OF GUM ROSIN 85 (PM-003) PT. NASCO GLYCEROL ESTER OF GUM ROSIN 85 is a pale thermoplastic resin made of gum rosin and glycerol / glycerine. It is perfectly soluble in various types of polymers. It exhibits excellent adhesiveness, as a result of which it is widely used to manufacture variou...weiterlesen GLYCEROL ESTER OF GUM ROSIN 85 is a pale thermoplastic resin made of gum rosin and glycerol / glycerine. It is perfectly soluble in various types of polymers. It exhibits excellent adhesiveness, as a result of which it is widely used to manufacture various adhesives, and primarily as a tackifier in hot melt adhesives (HMA). It has little odor and is light in color. verkürzen
Glycerol Ester of Gum Rosin G-85 Ecopower Chemical Co., Ltd. Glycerol Ester of Gum Rosin G-85 is a gum rosin derivative used in ester glue phenolic resin paints and as an enhancer for hot-melt adhesives and pressure-sensitive adhesives.
Glycerol Ester of Gum Rosin G-90 Ecopower Chemical Co., Ltd. Glycerol Ester of Gum Rosin G-90 is a gum rosin derivative used in ester glue phenolic resin paints and as an enhancer for hot-melt adhesives and pressure-sensitive adhesives.
Glycerol Ester of Gum Rosin G-90L Ecopower Chemical Co., Ltd. Glycerol Ester of Gum Rosin G-90L is a gum rosin derivative used in ester glue phenolic resin paints and as an enhancer for hot-melt adhesives and pressure-sensitive adhesives.
GRANOLITE G DRT This is a light-colored and deodorised gum rosin esterified with glycerol.
GRANOLITE G 105 DRT Gum rosin esterified with glycerol, GRANOLITE G 105 is a light-colored and deodorised resin suitable in various adhesive applications.
GRANOLITE P 118 DRT It is a pentaerythritol ester of rosin, showing a high softening point, mainly recommanded for Hot Melt formulations.
GRANOLITE SG DRT It is a glycerol ester of stabilized rosin, deodorized.
Gum Rosin LUKEM D.O.O. Gum Rosin is a light yellow, transparent solid with a softening point of 76ºC. This product is used as a raw material in coatings and synthetic resins.
GUM ROSIN INDONESIAN (PM-002) PT. NASCO GUM ROSIN INDONESIAN is made up of various resin acids such as Abietic, Palustric, Isopimaric, Mercusic Acids.
Gum Rosin [WW/WG Grade] Industrial Oleochemical Products Gum Rosin [WW/WG Grade] is a standard grade gum rosin in a nugget-sized particle form. This product is most commonly used in hot-melt and pressure-sensitive adhesive applications.
HE100 Tianyi Chemical Engineering Material Co., Ltd. HE100, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or S...weiterlesen HE100, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. verkürzen
HE105 Tianyi Chemical Engineering Material Co., Ltd. HE105, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or S...weiterlesen HE105, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. verkürzen
HE85 Tianyi Chemical Engineering Material Co., Ltd. HE85, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with glycerol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. Thi...weiterlesen HE85, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with glycerol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. verkürzen
HE90 Tianyi Chemical Engineering Material Co., Ltd. HE90, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with glycerol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. Thi...weiterlesen HE90, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with glycerol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. verkürzen
HE95 Tianyi Chemical Engineering Material Co., Ltd. HE95, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SB...weiterlesen HE95, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. verkürzen
HT100 Tianyi Chemical Engineering Material Co., Ltd. HT100, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This ...weiterlesen HT100, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. verkürzen
HT105 Tianyi Chemical Engineering Material Co., Ltd. HT105, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This ...weiterlesen HT105, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. verkürzen
HT115 Tianyi Chemical Engineering Material Co., Ltd. HT115, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This ...weiterlesen HT115, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. verkürzen
HT85 Tianyi Chemical Engineering Material Co., Ltd. HT85, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with glycerol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product ...weiterlesen HT85, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with glycerol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. verkürzen
HT90 Tianyi Chemical Engineering Material Co., Ltd. HT90, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with glycerol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product ...weiterlesen HT90, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with glycerol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. verkürzen
HT95 Tianyi Chemical Engineering Material Co., Ltd. HT95, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This p...weiterlesen HT95, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. verkürzen
MALEIC MODIFIED GLYCEROL ESTER OF GUM ROSIN 130 (PM-004) PT. NASCO MALEIC MODIFIED GLYCEROL ESTER OF GUM ROSIN 130 is an oil soluble resin that is a glycerol ester of Gum Rosin modified using Maleic Anhydride. It is a hard thermoplastic resin that offers excellent solubility, good solvent evaporation, and low viscosity i...weiterlesen MALEIC MODIFIED GLYCEROL ESTER OF GUM ROSIN 130 is an oil soluble resin that is a glycerol ester of Gum Rosin modified using Maleic Anhydride. It is a hard thermoplastic resin that offers excellent solubility, good solvent evaporation, and low viscosity in solutions used in formulating Nitrocellulose based formulations. It exhibits good hardness, high gloss and vest fest drying speed. verkürzen
PENTAERYTHRITOL ESTER OF GUM ROSIN 100 (PM-005) PT. NASCO PENTAERYTHRITOL ESTER OF GUM ROSIN 100 is a high softening point thermoplastic resin made of Gum Rosin and Pentaerythritol. It is soluble in aromatic solvents, aliphatic hydrocarbon solvents, esters, ketones, and chlorinated solvents, however, it is insol...weiterlesen PENTAERYTHRITOL ESTER OF GUM ROSIN 100 is a high softening point thermoplastic resin made of Gum Rosin and Pentaerythritol. It is soluble in aromatic solvents, aliphatic hydrocarbon solvents, esters, ketones, and chlorinated solvents, however, it is insoluble in methanol, ethanol, isopropanol, and water. It is well suited for the adhesive industry due to is weak odor, excellent heat stability and great adhesion properties and also it’s compatibility with many kinds of polymers. verkürzen
Pentaerythritol Ester of Gum Rosin P-100 Ecopower Chemical Co., Ltd. Pentaerythritol Ester of Gum Rosin P-100 is a gum rosin derivative used as a tackifier for applications such as EVA-based hot melt glue sticks, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints.
Pentaerythritol Ester of Gum Rosin P-100L Ecopower Chemical Co., Ltd. Pentaerythritol Ester of Gum Rosin P-100L is a gum rosin derivative used as a tackifier for applications such as EVA-based hot melt glue sticks, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints.
Pentaerythritol Ester of Gum Rosin P-115 Ecopower Chemical Co., Ltd. Pentaerythritol Ester of Gum Rosin P-115 is a gum rosin derivative used as a tackifier for applications such as EVA-based hot melt glue sticks, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints.
Polimelt P88 Respol Resinas Polimelt P88 is a tail oil rosin ester that can be used in adhesive formulations. This product has a softening point between 89-90 degrees Celsius and is designed for formulations with increased tackifying requirements. Its acid value is less than 10 mg...weiterlesen Polimelt P88 is a tail oil rosin ester that can be used in adhesive formulations. This product has a softening point between 89-90 degrees Celsius and is designed for formulations with increased tackifying requirements. Its acid value is less than 10 mg of potassium hydroxide per gram. verkürzen
RA100 Guangxi Zhongchang Resin Co., Ltd. RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...weiterlesen RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. verkürzen
RA100W Guangxi Zhongchang Resin Co., Ltd. RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...weiterlesen RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. verkürzen
RA120 Guangxi Zhongchang Resin Co., Ltd. RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...weiterlesen RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. verkürzen
RA120W Guangxi Zhongchang Resin Co., Ltd. RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...weiterlesen RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. verkürzen
RA140 Guangxi Zhongchang Resin Co., Ltd. RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...weiterlesen RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. verkürzen
RA140W Guangxi Zhongchang Resin Co., Ltd. RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...weiterlesen RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. verkürzen
RA90 Guangxi Zhongchang Resin Co., Ltd. RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive...weiterlesen RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. verkürzen
RA90W Guangxi Zhongchang Resin Co., Ltd. RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...weiterlesen RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. verkürzen
RF95 Guangxi Zhongchang Resin Co., Ltd. RF95 is a light yellow flaky solid and a glycerol modified pentaerythritol ester. This product is designed for hot-melt adhesives and provides storage stability, hot oxidation resistance and light color in addition to tackification. It dissolves in esters...weiterlesen RF95 is a light yellow flaky solid and a glycerol modified pentaerythritol ester. This product is designed for hot-melt adhesives and provides storage stability, hot oxidation resistance and light color in addition to tackification. It dissolves in esters, azulene ketones and aromatic hydrocarbon. verkürzen
RGF100 Guangxi Zhongchang Resin Co., Ltd. RGF100 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon so...weiterlesen RGF100 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. verkürzen
RGF100W Guangxi Zhongchang Resin Co., Ltd. RGF100W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon s...weiterlesen RGF100W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. verkürzen
RGF90 Guangxi Zhongchang Resin Co., Ltd. RGF90 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon solv...weiterlesen RGF90 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. verkürzen
RGF90W Guangxi Zhongchang Resin Co., Ltd. RGF90W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon sol...weiterlesen RGF90W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. verkürzen
RL10 Guangxi Zhongchang Resin Co., Ltd. RL10 is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 25 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a pr...weiterlesen RL10 is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 25 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a premium rosin ester is required. It can also be applied to sealants and coatings. verkürzen
RL10W Guangxi Zhongchang Resin Co., Ltd. RL10W is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 20 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a p...weiterlesen RL10W is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 20 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a premium rosin ester is required. It can also be applied to sealants and coatings. verkürzen
Rosin Modified Phenolic Resin - 2112 Guangxi Zhongchang Resin Co., Ltd. Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It ...weiterlesen Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. verkürzen
Rosin Modified Phenolic Resin - 2116 Guangxi Zhongchang Resin Co., Ltd. Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble i...weiterlesen Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. verkürzen
Rosin Modified Phenolic Resin - 2118 Guangxi Zhongchang Resin Co., Ltd. Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble i...weiterlesen Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. verkürzen
RPF100 Guangxi Zhongchang Resin Co., Ltd. RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ...weiterlesen RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. verkürzen
RPF100A Guangxi Zhongchang Resin Co., Ltd. RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low...weiterlesen RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. verkürzen
RPF100B Guangxi Zhongchang Resin Co., Ltd. RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low...weiterlesen RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. verkürzen
RPF100W Guangxi Zhongchang Resin Co., Ltd. RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ...weiterlesen RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. verkürzen
RPF90 Guangxi Zhongchang Resin Co., Ltd. RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ca...weiterlesen RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. verkürzen
RPF90W Guangxi Zhongchang Resin Co., Ltd. RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ca...weiterlesen RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. verkürzen
Snowtack™ 765A Lawter Snowtack™ 765A is a waterborne tackifier dispersant that aims to provide superior adhesive performance to various substrates. It is free of alkylphenol ethoxylate (APE) and has no solvents. The product helps to boost adhesion to high and low energy surfac...weiterlesen Snowtack™ 765A is a waterborne tackifier dispersant that aims to provide superior adhesive performance to various substrates. It is free of alkylphenol ethoxylate (APE) and has no solvents. The product helps to boost adhesion to high and low energy surfaces. It is mechanically stable, has good wash-off behavior and is suitable for use in waterborne adhesives in building and construction and automotive and paper industries. verkürzen
Snowtack™ SE724G Lawter Snowtack™ SE724G is a solvent-free waterborne tackifier with a stabilized rosin ester component that brings superior adhesive performance to a variety of substrates. The product is free of alkylphenol ethoxylate (APE) and has the ability to soften hard re...weiterlesen Snowtack™ SE724G is a solvent-free waterborne tackifier with a stabilized rosin ester component that brings superior adhesive performance to a variety of substrates. The product is free of alkylphenol ethoxylate (APE) and has the ability to soften hard resins, providing a smooth peel. It also improves adhesion to high and low energy surfaces and shows compatibility with acrylic and other polymers. It has good water resistance, is mechanically stable and has applications in waterborne, pressure-sensitive adhesives in various industries. verkürzen
Snowtack™ SE780G Lawter Snowtack™ SE780G is a waterborne tackifier from adducted rosin and a process of esterification. It is solvent-free with a resin ester component that brings superior adhesive performance to a variety of substrates. The product displays high cohesion, impro...weiterlesen Snowtack™ SE780G is a waterborne tackifier from adducted rosin and a process of esterification. It is solvent-free with a resin ester component that brings superior adhesive performance to a variety of substrates. The product displays high cohesion, improves adhesion to high and low-energy substrates, has good mechanical stability and has applications in various waterborne adhesive systems. verkürzen
Tackifier 68 Ichemco Tackifier 68 is a solvent-free, waterborne dispersion of a stabilized rosin ester. This product has a total solids content of 52-54% and a Brookfield viscosity at 25°C of 200-600 cPs. Tackifier 68 is most commonly used to enhance pressure sensitive proper...weiterlesen Tackifier 68 is a solvent-free, waterborne dispersion of a stabilized rosin ester. This product has a total solids content of 52-54% and a Brookfield viscosity at 25°C of 200-600 cPs. Tackifier 68 is most commonly used to enhance pressure sensitive properties in acrylic, SBR, and synthetic water-based polymer adhesive applications. verkürzen
Tackifier 80 Ichemco Tackifier 80 is a solvent-free, waterborne tackifier dispersion. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 100-500 cPs. Tackifier 80 is most commonly used as a tackifier in acrylic polymer-based pressure sensi...weiterlesen Tackifier 80 is a solvent-free, waterborne tackifier dispersion. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 100-500 cPs. Tackifier 80 is most commonly used as a tackifier in acrylic polymer-based pressure sensitive adhesive production applications. verkürzen
Tackifier 95 Ichemco Tackifier 95 is a solvent-free, waterborne tackifier dispersion. This product has a total solids content of 50-57% and a Brookfield viscosity at 25°C of less than 1000 mPa.s. Tackifier 95 is most commonly used to enhance pressure sensitive properties in p...weiterlesen Tackifier 95 is a solvent-free, waterborne tackifier dispersion. This product has a total solids content of 50-57% and a Brookfield viscosity at 25°C of less than 1000 mPa.s. Tackifier 95 is most commonly used to enhance pressure sensitive properties in polymeric latex, as well as self-adhesive tape and label applications. verkürzen
Tackwhite A 205 M1 (V1) Ichemco Tackwhite A 205 M1 (V1) is a water based p.s.a., based on an anionic dispersion of natural and synthetic latices and rosin esters, properly stabilized and thickened. Tackwhite A 205 M1 (V1) is most commonly used in permanent paper label applications where...weiterlesen Tackwhite A 205 M1 (V1) is a water based p.s.a., based on an anionic dispersion of natural and synthetic latices and rosin esters, properly stabilized and thickened. Tackwhite A 205 M1 (V1) is most commonly used in permanent paper label applications where a higher adhesive power is required. verkürzen
Tackwhite A 205 M1 (V1/2) Ichemco Tackwhite A 205 M1 (V1/2) is a water based p.s.a., based on an anionic dispersion of natural and synthetic latices and rosin esters, properly stabilized and thickened. Tackwhite A 205 M1 (V1/2) is most commonly used in permanent paper label applications w...weiterlesen Tackwhite A 205 M1 (V1/2) is a water based p.s.a., based on an anionic dispersion of natural and synthetic latices and rosin esters, properly stabilized and thickened. Tackwhite A 205 M1 (V1/2) is most commonly used in permanent paper label applications where a higher adhesive power is required. verkürzen
Tackwhite A 205 M1 (V2) Ichemco Tackwhite A 205 M1 (V2) is a water based p.s.a., based on an anionic dispersion of natural and synthetic latices and rosin esters, properly stabilized and thickened. Tackwhite A 205 M1 (V2) is most commonly used in permanent paper label applications wher...weiterlesen Tackwhite A 205 M1 (V2) is a water based p.s.a., based on an anionic dispersion of natural and synthetic latices and rosin esters, properly stabilized and thickened. Tackwhite A 205 M1 (V2) is most commonly used in permanent paper label applications where a higher adhesive power is required. verkürzen
Tackwhite A 205 M1 (V3) Ichemco Tackwhite A 205 M1 (V3) is a water based p.s.a., based on an anionic dispersion of natural and synthetic latices and rosin esters, properly stabilized and thickened. Tackwhite A 205 M1 (V3) is most commonly used in permanent paper label applications where...weiterlesen Tackwhite A 205 M1 (V3) is a water based p.s.a., based on an anionic dispersion of natural and synthetic latices and rosin esters, properly stabilized and thickened. Tackwhite A 205 M1 (V3) is most commonly used in permanent paper label applications where a higher adhesive power is required. verkürzen
Tackwhite A 205 SL (V1) Ichemco Tackwhite A 205 SL (V1) is a water borne p.s.a., based on anionic dispersion of natural and synthetic latices (SBR, acrylics) and rosin esters, properly stabilised and thickened.Tackwhite A 205 SL (V1) is most commonly used in permanent paper label applic...weiterlesen Tackwhite A 205 SL (V1) is a water borne p.s.a., based on anionic dispersion of natural and synthetic latices (SBR, acrylics) and rosin esters, properly stabilised and thickened.Tackwhite A 205 SL (V1) is most commonly used in permanent paper label applications. verkürzen
Tackwhite A 205 SL (V2) Ichemco Tackwhite A 205 SL (V2) is a water borne p.s.a., based on anionic dispersion of natural and synthetic latices (SBR, acrylics) and rosin esters, properly stabilised and thickened. Tackwhite A 205 SL (V2) is most commonly used in permanent paper label appl...weiterlesen Tackwhite A 205 SL (V2) is a water borne p.s.a., based on anionic dispersion of natural and synthetic latices (SBR, acrylics) and rosin esters, properly stabilised and thickened. Tackwhite A 205 SL (V2) is most commonly used in permanent paper label applications. verkürzen
Tackwhite A 305 SL Ichemco Tackwhite A 305 SL is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion. Tackwhite A 305 SL is most commonly used in permanent paper label applications where a high...weiterlesen Tackwhite A 305 SL is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion. Tackwhite A 305 SL is most commonly used in permanent paper label applications where a higher adhesive power is required. verkürzen
Tackwhite A 305 SL (V2) Ichemco Tackwhite A 305 SL (V2) is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion.Tackwhite A 305 SL (V2) is most commonly used in permanent paper label applications wh...weiterlesen Tackwhite A 305 SL (V2) is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion.Tackwhite A 305 SL (V2) is most commonly used in permanent paper label applications where a higher adhesive power is required. verkürzen
Tackwhite A 305 SL (V3) Ichemco Tackwhite A 305 SL (V3) is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion. Tackwhite A 305 SL (V3) is most commonly used in permanent paper label applications w...weiterlesen Tackwhite A 305 SL (V3) is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion. Tackwhite A 305 SL (V3) is most commonly used in permanent paper label applications where a higher adhesive power is required. verkürzen
Tergum 100 Ichemco Tergum 100 is a stabilized pentaerythritol esterified rosin in a flake form. This product has a melting range of 92-98°C. Tergum 100 is most commonly used as a tackifier in water-based, solvent, and hot-melt adhesive formulation applications.
Tergum 120 Ichemco Tergum 120 is a stabilized pentaerythritol esterified rosin in a flake form. This product is most commonly used as a tackifier in water-based, solvent, and hot-melt adhesive formulation applications.