| 1488 VT/OIL Copolymer Resin | Gabriel Performance Products | 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evapora...weiterlesen 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evaporation or solvent from the applied coatings surface. To improve the mar resistance of the coating, approximately 10% melamine resin is added and cured for 20 minutes at 250°F (121°C). verkürzen | |
| 4070-M-60 L/S Alkyd Resin | Gabriel Performance Products | 4070-M-60 L/S Alkyd Resin conforms to Federal Specification TT-R-266D, Type I, Class B. It is a general purpose resin for interior or exterior use in architectural and trim enamels, structural and machinery paints. | |
| Atresal K29/60 X | Atcoat GmbH | Atresal K29/60 X is short oil alkyd resin, consisting of dehydrated castor oil and xylene, suitable for machine paints, stove drying lacquers and primers, car repair lacquers, highly reactive resin, and NC and AC coatings. Atcoat alkyd resins are based on...weiterlesen Atresal K29/60 X is short oil alkyd resin, consisting of dehydrated castor oil and xylene, suitable for machine paints, stove drying lacquers and primers, car repair lacquers, highly reactive resin, and NC and AC coatings. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K29/60 X has an oil length of 29 a solid of 60%, and a viscosity of 65 to 80 sec. verkürzen | |
| Atresal M2391/50 D X | Atcoat GmbH | Atresal M2391/50 D X is medium oil fast drying alkyd resin, consisting of high quality fatty acid, aliphatic naphtha, and xylene, that is suitable for the production of high quality air drying industrial coatings, radiator and machine paints, with through...weiterlesen Atresal M2391/50 D X is medium oil fast drying alkyd resin, consisting of high quality fatty acid, aliphatic naphtha, and xylene, that is suitable for the production of high quality air drying industrial coatings, radiator and machine paints, with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M2391/50 D X has an oil length of 49, a solid of 50%, and a viscosity of 90 to 120 sec. verkürzen | |
| Atresal M41/60 X | Atcoat GmbH | Atresal M41/60 X is medium oil alkyd resins, consisting of fatty acid, suitable for car repair, NC lacquers, machine, and PUR-coatings with good yellowing resistance, color fastness, and high flexibility. Atcoat alkyd resins are based on natural raw mater...weiterlesen Atresal M41/60 X is medium oil alkyd resins, consisting of fatty acid, suitable for car repair, NC lacquers, machine, and PUR-coatings with good yellowing resistance, color fastness, and high flexibility. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M41/60 X has an oil length of 41, a solid of 60%, and a viscosity of 65 to 85 sec. verkürzen | |
| Atresal M41/75 BA | Atcoat GmbH | Atresal M41/75 BA is medium oil alkyd resins, consisting of fatty acid and butylacetat, suitable for car repair, NC lacquers, machine, and PUR-coatings with good yellowing resistance, color fastness, and high flexibility. Atcoat alkyd resins are based on ...weiterlesen Atresal M41/75 BA is medium oil alkyd resins, consisting of fatty acid and butylacetat, suitable for car repair, NC lacquers, machine, and PUR-coatings with good yellowing resistance, color fastness, and high flexibility. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M41/75 BA has an oil length of 41, a solid of 75%, and a viscosity of 100 to 130 dPas. verkürzen | |
| Atresal M491/50 K2 Y | Atcoat GmbH | Atresal M491/50 K2 Y is medium oil alkyd resin, consisting of high quality fatty acid, white spirit, and further solvent additives, suitable for the production of high quality air drying industrial coatings, radiator and machine paints, with through dryi...weiterlesen Atresal M491/50 K2 Y is medium oil alkyd resin, consisting of high quality fatty acid, white spirit, and further solvent additives, suitable for the production of high quality air drying industrial coatings, radiator and machine paints, with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M491/50 K2 Y has an oil length of 49, a solid of 50%, and a viscosity of 65 to 80 sec. verkürzen | |
| Atresal M49/50 D4 | Atcoat GmbH | Atresal M49/50 D4 is medium oil alkyd resin, consisting of fatty acid and aliphatic naphtha, suitable for the production of high quality air drying industrial coatings, car repair lacquers, radiator and machine paints with through drying and fast surface....weiterlesen Atresal M49/50 D4 is medium oil alkyd resin, consisting of fatty acid and aliphatic naphtha, suitable for the production of high quality air drying industrial coatings, car repair lacquers, radiator and machine paints with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M49/50 D4 has an oil length of 49, a solid of 50%, and a viscosity of 110 to 140 sec. verkürzen | |
| Atresal M49/50 K2 | Atcoat GmbH | Atresal M49/50 K2 is medium oil alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of high quality air drying industrial coatings, car repair lacquers, radiator and machine paints with through drying and fast ...weiterlesen Atresal M49/50 K2 is medium oil alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of high quality air drying industrial coatings, car repair lacquers, radiator and machine paints with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M49/50 K2 has an oil length of 49, a solid of 50%, and a viscosity of 45 to 55 sec. verkürzen | |
| Atresal M49/50 K3 | Atcoat GmbH | Atresal M49/50 K3 is medium oil alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of high quality air drying industrial coatings, car repair lacquers, radiator and machine paints with through drying and fast ...weiterlesen Atresal M49/50 K3 is medium oil alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of high quality air drying industrial coatings, car repair lacquers, radiator and machine paints with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M49/50 K3 has an oil length of 49, a solid of 50%, and a viscosity of 45 to 55 sec. verkürzen | |
| Atresal M49/55 D4 | Atcoat GmbH | Atresal M49/55 D4 is medium oil fast drying alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and f...weiterlesen Atresal M49/55 D4 is medium oil fast drying alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M49/55 D4 has an oil length of 49, a solid of 55%, and a viscosity of 110 to 114 sec. verkürzen | |
| Atresal M49/55 K3 | Atcoat GmbH | Atresal M49/55 K3 is medium oil fast drying alkyd resin, consisting of fatty acid and white spirit, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and fast surface. Atcoa...weiterlesen Atresal M49/55 K3 is medium oil fast drying alkyd resin, consisting of fatty acid and white spirit, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M49/55 K3 has an oil length of 49, a solid of 55%, and a viscosity of 45 to 55 sec. verkürzen | |
| Atresal M49HS/75 BA | Atcoat GmbH | Atresal M49HS/75 BA is medium oil fast drying alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and fast ...weiterlesen Atresal M49HS/75 BA is medium oil fast drying alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M49P/55 K3 has an oil length of 49, a solid of 75%, and a viscosity of 60 to 80 dPas. verkürzen | |
| Atresal M49M/55 D4 | Atcoat GmbH | Atresal M49M/55 D4 is medium oil fast drying alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and ...weiterlesen Atresal M49M/55 D4 is medium oil fast drying alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M49M/55 D4 has an oil length of 49, a solid of 55%, and a viscosity of 120 to 180 sec. verkürzen | |
| Atresal M49P/55 K3 | Atcoat GmbH | Atresal M49P/55 K3 is medium oil fast drying alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and fast ...weiterlesen Atresal M49P/55 K3 is medium oil fast drying alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M49P/55 K3 has an oil length of 49, a solid of 55%, and a viscosity of 20000 to 40000 mPas. verkürzen | |
| Atresal SO 485/60 X | Atcoat GmbH | Atresal SO 485/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for fast drying paints with good weather resistance, low yellowing, good adhesion, chalking resistance, flexibility, hardness, and is also recommended...weiterlesen Atresal SO 485/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for fast drying paints with good weather resistance, low yellowing, good adhesion, chalking resistance, flexibility, hardness, and is also recommended for machinery enamels and industrial coatings. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal SO 485/60 X has an oil length of 33 a solid of 60%, and a viscosity of 3.8 to 4.8 Pas. verkürzen | |
| BAM 202 WS-55 | Bonyan Kala Chemie Co. | BAM 202 WS-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 350-900 stoke ...weiterlesen BAM 202 WS-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 350-900 stoke at 25°C and is mainly used in zinc chromate primers, industrial machinery coatings, metal structural coatings, and spray, auto body repair and industrial air-drying paints. verkürzen | |
| BAM 203 X-60 | Bonyan Kala Chemie Co. | BAM 203 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-100 stoke at...weiterlesen BAM 203 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-100 stoke at 25°C and is mainly used in auto body repair paints, metallic paints, industrial machinery coatings, metal structural coatings, and industrial air-drying paints. verkürzen | |
| BAM 204 WS-50 | Bonyan Kala Chemie Co. | BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke ...weiterlesen BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke at 25°C and is mainly used in cabinet and spray paints, industrial air-drying paints, metal structural coatings, industrial machinery coatings, paste for architectural paints, and anti-corrosion primers. verkürzen | |
| BAM 208 WSX-55 | Bonyan Kala Chemie Co. | BAM 208 WSX-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-180 stoke ...weiterlesen BAM 208 WSX-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-180 stoke at 25°C and is mainly used in auto body repair paints, industrial machinery coatings, cabinet and spray paints, and industrial air-drying paints. verkürzen | |
| BAM 212 X-60 | Bonyan Kala Chemie Co. | BAM 212 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 60-90 stoke at ...weiterlesen BAM 212 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 60-90 stoke at 25°C and is mainly used in auto body repair paints, industrial machinery coatings, metallic paints, industrial air-drying paints, and paint paste. verkürzen | |
| Benasol 4V | Benasedo | Benasol 4V is a very fast air drying alkyd resin phenolic modified having good through dry. It is especially recommended for rust-inhibitive metal and nitrocellulose non lifting primers, fast air–drying enamels for farm and industrial equipment. | Request Sample |
| BENASOL AS 308 in XYLENE | Benasedo | BENASOL AS 308 in XYLENE is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlor...weiterlesen BENASOL AS 308 in XYLENE is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. verkürzen | Request Sample |
| BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) | Benasedo | BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in ...weiterlesen BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. verkürzen | Request Sample |
| BENASOL AS 3716 | Benasedo | BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber...weiterlesen BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. verkürzen | Request Sample |
| BYD-1403 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1403, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used on surface coatings for paper and leather, roller coatings, spray paints, transfer printing, and intaglio printing applications. Th...weiterlesen BYD-1403, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used on surface coatings for paper and leather, roller coatings, spray paints, transfer printing, and intaglio printing applications. This product is non-toxic. Its substrate is an aromatic waterborne polyurethane. verkürzen | |
| BYK-3755 | BYK | BYK-3755 is a silicone-containing surface additive with extended food contact compliance for solvent-borne coating systems with a medium reduction in surface tension and a medium increase in surface slip. | |
| BYK-3756 | BYK | BYK-3756 is a silicone-containing surface additive with extended food contact compliance for solvent-borne, solvent-free, and aqueous coating systems with a strong reduction in surface tension. Excellent substrate wetting prevents cratering and increases ...weiterlesen BYK-3756 is a silicone-containing surface additive with extended food contact compliance for solvent-borne, solvent-free, and aqueous coating systems with a strong reduction in surface tension. Excellent substrate wetting prevents cratering and increases surface slip. verkürzen | |
| CHS-Alkyd C 351 E 75 | Spolchemie | CHS-Alkyd C 351 E 75 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 75% solution in butyl acetate. The oil length for this product is estimated ...weiterlesen CHS-Alkyd C 351 E 75 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 75% solution in butyl acetate. The oil length for this product is estimated to be around 39%. CHS-Alkyd C 351 E 75 is primarily used for stove coatings and paints constructed on nitrocellulose. verkürzen | |
| CHS-Alkyd C 351 X 60 | Spolchemie | CHS-Alkyd C 351 X 60 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be a...weiterlesen CHS-Alkyd C 351 X 60 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 39%. CHS-Alkyd C 351 X 60 is primarily used for stove coatings and paints fabricated on nitrocellulose. verkürzen | |
| CHS-Epoxy 101 X 60 | Spolchemie | CHS-Epoxy 101 X 60 is a Gardner colored solution of epoxy resin. It has 60 percent xylene solution of a higher molecular weight esterified epoxy resin. This product is primarily used for manufacturing an air-dry coating or stove coatings, in combination w...weiterlesen CHS-Epoxy 101 X 60 is a Gardner colored solution of epoxy resin. It has 60 percent xylene solution of a higher molecular weight esterified epoxy resin. This product is primarily used for manufacturing an air-dry coating or stove coatings, in combination with melamine-formaldehyde resins. verkürzen | |
| Crestakyd® 30-5016 | Scott Bader | Crestakyd® 30-5016 is used for very quick drying industrial paints with good all round properties. | |
| Crestakyd® 41-6010 | Scott Bader | Crestakyd® 41-6010 is a styrene modified alkyd used for quick drying enamels. | |
| Disvacryl-1001 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1001 is a thermosetting acrylic resin. This product includes xylene and butanol as volatile byproducts. It can be used in high-quality domestic appliance and OEM automotive finishes. | |
| Disvacryl-1010 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1010 is a thermoplastic acrylic resin. This product includes naphtha solvents as a volatile byproduct. It can be used in high-quality air-drying coatings that provide good gloss and durability. | |
| Disvacryl-1011 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1011 is a thermoplastic acrylic resin. This product includes xylene and naphtha solvents as volatile byproducts. It can be used in high-quality air-drying coatings for domestic appliances which provide good gloss and durability. | |
| Disvalkyd-544 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-544 is an alkyd resin made with short-length oils. This product derives from diluted crude oil and glycerine polyols. It can be used in stoving enamels, and nitrocellulose paints, primers, and putty. | |
| Disvalkyd-544 LV | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-544 LV is an alkyd resin made with short-length oils. This product derives from diluted crude oil and glycerine polyols. It can be used in high-gloss stoving enamels. | |
| Disvamine-702 | D.S.V. Chemicals Pvt. Ltd. | Disvamine-702 is a butylated amino resin. This product is a melamine formaldehyde resin. It is soluble in butanol. Disvamine-702 can be used in stoving enamels and roller coatings. | |
| Domacryl 5130 70 BAc | HELIOS RESINS | Domacryl 5130 70 BAc is a standard and cost-efficient high-solid hydroxy acrylic resin designed for room temperature drying or forced drying of two-pack primers and top coats for transportation coatings, machinery, and other high-quality protective and ma...weiterlesen Domacryl 5130 70 BAc is a standard and cost-efficient high-solid hydroxy acrylic resin designed for room temperature drying or forced drying of two-pack primers and top coats for transportation coatings, machinery, and other high-quality protective and maintenance coatings. verkürzen | |
| DOWSIL™ 8590 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surfa...weiterlesen DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surface gloss. DOWSIL™ 8590 Additive can be used as sole defoamer for both grind and let down stages. Usage level can be 50 to 70 percent less than conventional defoamers for comparable or better performance. verkürzen | |
| Epoxies® 70-3812 NC | Epoxies, Etc. | Epoxies® 70-3812 NC is a two part, aluminum filled, high thermal transfer epoxy. Primarily used for the production of heat resistant tools, parts, or bonds that require the highest thermal conductivity and heat resistance. Epoxies® 70-3812 NC is formulate...weiterlesen Epoxies® 70-3812 NC is a two part, aluminum filled, high thermal transfer epoxy. Primarily used for the production of heat resistant tools, parts, or bonds that require the highest thermal conductivity and heat resistance. Epoxies® 70-3812 NC is formulated with a unique combination of fillers, particle sizes and dispersion techniques. It is well suited for use with a variety of heat sink applications and its viscosity is particularly good for Fin bonding. verkürzen | |
| Idroben 4705 | Benasedo | Idroben 4705 is a high – solids, non-yellowing water-dilutable alkyd,endowed with good mechanical characteristics and gloss retention. It allows wide industrial applications, like air – drying primers and finishes or bake – coatings when crosslinked with ...weiterlesen Idroben 4705 is a high – solids, non-yellowing water-dilutable alkyd,endowed with good mechanical characteristics and gloss retention. It allows wide industrial applications, like air – drying primers and finishes or bake – coatings when crosslinked with amino - resins. verkürzen | Request Sample |
| Idroben 827 | Benasedo | Idroben 827 is a fast air-drying, non-yellowing alkyd resin, water-dilutable when neutralized, endowed with good mechanical properties and gloss retention. It is suggested for formulating primers and topcoats for industrial equipments, applied by spraying...weiterlesen Idroben 827 is a fast air-drying, non-yellowing alkyd resin, water-dilutable when neutralized, endowed with good mechanical properties and gloss retention. It is suggested for formulating primers and topcoats for industrial equipments, applied by spraying or dipping. verkürzen | Request Sample |
| ISOBEN 5 | Benasedo | ISOBEN 5 is a saturated branched polyester with high hydroxyl content, suggested in two-component systems when adhesion, color and gloss retention, mechanical, outdoor and chemical resistances are particularly required. It is suggested for formulating pig...weiterlesen ISOBEN 5 is a saturated branched polyester with high hydroxyl content, suggested in two-component systems when adhesion, color and gloss retention, mechanical, outdoor and chemical resistances are particularly required. It is suggested for formulating pigmented or clear finishes, for metals, in automotive industry, marine superstructures and concrete manucfatures . verkürzen | Request Sample |
| Nebores® DB 4004-60 X | NECARBO B.V. | Nebores® DB 4004-60 X is an epoxy ester of dehydrated castor oil fatty acids consisting of 60% xylene. This yellow liquid functions as a chemically resistant, flexible adhesive used on primed and non-primed metal surfaces. Nebores® DB 4004-60 X finds app...weiterlesen Nebores® DB 4004-60 X is an epoxy ester of dehydrated castor oil fatty acids consisting of 60% xylene. This yellow liquid functions as a chemically resistant, flexible adhesive used on primed and non-primed metal surfaces. Nebores® DB 4004-60 X finds application in protective coatings, alkali resistant primers, zinc rich primers, stamping enamels, collapsible tube coatings, and domestic appliance finishes with amino resins. verkürzen | |
| Nebores® FPB 272-50 D | NECARBO B.V. | Nebores® FPB 272-50 D is a medium alkyd resin appearing as a light yellow liquid. 50% in Shellsol™ D 40, it improves dying and has through-drying properties at low temperatures, gloss and colour retention at elevated temperatures and in outdoor conditions...weiterlesen Nebores® FPB 272-50 D is a medium alkyd resin appearing as a light yellow liquid. 50% in Shellsol™ D 40, it improves dying and has through-drying properties at low temperatures, gloss and colour retention at elevated temperatures and in outdoor conditions, and adhesion on steel and primers. Nebores® FPB 272-50 D finds application in radiator paints requiring yellowing resistance, and in industrial coatings. verkürzen | |
| Nebores® SA 21-60 X | NECARBO B.V. | Nebores® SA 21-60 X is a styrenated alkyd resin that provides good wetting and filling properties, good chemical and water resistance, and fast drying and hardening. This product finds application in one coat paints, hammer finishes, and quick-drying prim...weiterlesen Nebores® SA 21-60 X is a styrenated alkyd resin that provides good wetting and filling properties, good chemical and water resistance, and fast drying and hardening. This product finds application in one coat paints, hammer finishes, and quick-drying primers. verkürzen | |
| Nebores® SPB 272-50 D | NECARBO B.V. | Nebores® SPB 272-50 D is an air-drying medium oil alkyd resin based on pentaerythritol-esterified vegetable fatty acids. It provides good drying properties, very good gloss and colour retention, and excellent adhesion to steel and primers. This product fi...weiterlesen Nebores® SPB 272-50 D is an air-drying medium oil alkyd resin based on pentaerythritol-esterified vegetable fatty acids. It provides good drying properties, very good gloss and colour retention, and excellent adhesion to steel and primers. This product finds application in automotive repair enamels, fast-air-drying industrial finishes, radiator enamels, and marine and construction paints. verkürzen | |
| Nebores® SPB 272-55 LV | NECARBO B.V. | Nebores® SPB 272-55 LV is an air-drying medium oil alkyd resin based on pentaerythritol-esterified vegetable fatty acids. It provides good drying properties, very good gloss and colour retention, and excellent adhesion to steel and primers. This product f...weiterlesen Nebores® SPB 272-55 LV is an air-drying medium oil alkyd resin based on pentaerythritol-esterified vegetable fatty acids. It provides good drying properties, very good gloss and colour retention, and excellent adhesion to steel and primers. This product finds application in automotive repair enamels, fast-air-drying industrial finishes, radiator enamels, and marine and construction paints. verkürzen | |
| Nebores® SPB 272-65 D | NECARBO B.V. | Nebores® SPB 272-65 D is an air-drying medium oil alkyd resin based on pentaerythritol-esterified vegetable fatty acids. It provides good drying properties, good gloss and colour retention, and excellent adhesion to steel and primers. This product finds a...weiterlesen Nebores® SPB 272-65 D is an air-drying medium oil alkyd resin based on pentaerythritol-esterified vegetable fatty acids. It provides good drying properties, good gloss and colour retention, and excellent adhesion to steel and primers. This product finds application in automotive repair enamels, fast-air-drying industrial finishes, radiator enamels, and marine and construction paints. verkürzen | |
| Nebores® T 4001-50 X | NECARBO B.V. | Nebores® T 4001-50 X is an epoxy ester of unsaturated fatty acids, featuring outstanding adhesion to metal surfaces and good flexibility and anticorrosive properties. This product finds application in appliance finishes and alkali-resistant, zinc-rich pri...weiterlesen Nebores® T 4001-50 X is an epoxy ester of unsaturated fatty acids, featuring outstanding adhesion to metal surfaces and good flexibility and anticorrosive properties. This product finds application in appliance finishes and alkali-resistant, zinc-rich primers. verkürzen | |
| Novalkyd S1022-60X | Novaresine S.r.l | Novalkyd S1022-60X is a short oil, non-drying alkyd that has a high color retention, making it suitable for all types of white non-yellowing enamels. These would include baked enamels for metal furniture, along with household appliances and industrial fin...weiterlesen Novalkyd S1022-60X is a short oil, non-drying alkyd that has a high color retention, making it suitable for all types of white non-yellowing enamels. These would include baked enamels for metal furniture, along with household appliances and industrial finishes. When combined with nitrocellulose, it exhibits non-yellowing features, along with high gloss in flexible lacquers and enamels. verkürzen | |
| Novalkyd S1023-50S100 | Novaresine S.r.l | Novalkyd S1023-50S100 is a short oil, non-drying alkyd that has a high color retention, making it ideal for all kinds of white, non-yellowing enamels. It is recommended in baking enamels for metal furniture, household appliances and general industrial fin...weiterlesen Novalkyd S1023-50S100 is a short oil, non-drying alkyd that has a high color retention, making it ideal for all kinds of white, non-yellowing enamels. It is recommended in baking enamels for metal furniture, household appliances and general industrial finishes. When combined with nitrocellulose, it provides high gloss and non-yellowing features. verkürzen | |
| Novalkyd S1196-60X | Novaresine S.r.l | Novalkyd S1196-60X is a short to medium oil alkyd resin that displays high gloss, yellowing retention and long-term exterior resistance. It is used to formulate quick siccative enamels for car refinishing, 80°C stoving enamels, radiators and primers. Nova...weiterlesen Novalkyd S1196-60X is a short to medium oil alkyd resin that displays high gloss, yellowing retention and long-term exterior resistance. It is used to formulate quick siccative enamels for car refinishing, 80°C stoving enamels, radiators and primers. Novalkyd S1196-60X can also be used to prepare road markings. verkürzen | |
| Novalkyd S1214-60X | Novaresine S.r.l | Novalkyd S1214-60X is a siccative, short oil alkyd resin that displays good hardness, brightness and fast curing and is formulated for primers and industrial finishes. It can also be used in stoving varnishes for metals. | |
| Novalkyd S1225-60X | Novaresine S.r.l | Novalkyd S1225-60X is a drying, medium oil alkyd resin that is fast drying for air and stoving varnishes with good gloss, brushability and abrasion-resistance properties. It is suitable for primers and paints used in automotive, agricultural machinery and...weiterlesen Novalkyd S1225-60X is a drying, medium oil alkyd resin that is fast drying for air and stoving varnishes with good gloss, brushability and abrasion-resistance properties. It is suitable for primers and paints used in automotive, agricultural machinery and industrial tools. verkürzen | |
| Novalkyd S1485-60X | Novaresine S.r.l | Novalkyd S1485-60X is a short oil alkyd that is based on high-quality vegetable fatty acids which enables the manufacturing of paints that have low yellowing properties, combined with short drying times. Paints are characterized by good flexibility, hardn...weiterlesen Novalkyd S1485-60X is a short oil alkyd that is based on high-quality vegetable fatty acids which enables the manufacturing of paints that have low yellowing properties, combined with short drying times. Paints are characterized by good flexibility, hardness and good adhesion. Weathering and chalking resistance are also good. Novalkyd S1485-60X is recommended for general machinery enamels. verkürzen | |
| Novalkyd S1486-60X | Novaresine S.r.l | Novalkyd S1486-60X is a short oil alkyd resin that is formulated with high-quality vegetable fatty acids that make it suitable for paints with low yellowing, combined with short drying times and fast hardness development. The films are characterized by go...weiterlesen Novalkyd S1486-60X is a short oil alkyd resin that is formulated with high-quality vegetable fatty acids that make it suitable for paints with low yellowing, combined with short drying times and fast hardness development. The films are characterized by good flexibility, adhesion and hardness. Weathering and chalking resistance is also good. Novalkyd S1486-60X is recommended for general machinery enamels. verkürzen | |
| Novasynt S1550-55 | Novaresine S.r.l | Novasynt S1550-55 is a saturated polyester that provides excellent flexibility, adhesion, gloss, and non-yellowing properties. In combination with amino resins, this product recommended for use in industrial enamels and coatings for appliance, metal conta...weiterlesen Novasynt S1550-55 is a saturated polyester that provides excellent flexibility, adhesion, gloss, and non-yellowing properties. In combination with amino resins, this product recommended for use in industrial enamels and coatings for appliance, metal container, and coil applications. verkürzen | |
| Novasynt S1554-65 | Novaresine S.r.l | Novasynt S1554-65 is a saturated polyester that is designed for coil coating systems where high mechanical performance is needed. Enamels that contain the resin are also marked by good outdoor durability. Novasynt S1554-65 is suitable for coil application...weiterlesen Novasynt S1554-65 is a saturated polyester that is designed for coil coating systems where high mechanical performance is needed. Enamels that contain the resin are also marked by good outdoor durability. Novasynt S1554-65 is suitable for coil applications in appliances, ceilings, construction panels and indoor and outdoor use. verkürzen | |
| Novasynt S1608-66 | Novaresine S.r.l | Novasynt S1608-66 is a saturated polyester that is made for coil coating systems where high mechanical performance is a necessity. Enamels that use the resin also show good outdoor durability. Novasynt S1608-66 is recommended for use in coil applications ...weiterlesen Novasynt S1608-66 is a saturated polyester that is made for coil coating systems where high mechanical performance is a necessity. Enamels that use the resin also show good outdoor durability. Novasynt S1608-66 is recommended for use in coil applications like construction panels, appliances and ceilings. verkürzen | |
| Polyester Modified Silicon Resin SM1072A | Jiangsu Sanmu Group Corporation | SM1072A is a polyester modified silicone resin. It has high-low temperature resistance and hydrophobic moisture resistance, as well as good weather resistance and chemical resistance. After fully curing, the hardness is ≥ 5H, with high gloss, fullness and...weiterlesen SM1072A is a polyester modified silicone resin. It has high-low temperature resistance and hydrophobic moisture resistance, as well as good weather resistance and chemical resistance. After fully curing, the hardness is ≥ 5H, with high gloss, fullness and yellowing resistance. SM1072A can be widely used in heat resisting coatings, used as a basic resin for non-stick coatings and special coatings for frying pans, electric cookers, ovens, stoves, toasters, electric irons, kitchen ventilators, and gas stoves. verkürzen | |
| R2-3930-11 | NuSil Silicone Technology 1 | R2-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. This product can be used to bond or protect hardware components that are exposed to aviation fuels or gasoline. It can also be utilized in applications w...weiterlesen R2-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. This product can be used to bond or protect hardware components that are exposed to aviation fuels or gasoline. It can also be utilized in applications where coating, sealing, and bonding are necessary for fuel and /or solvent resistance. It has strong physical attributes which make it bond aggressively to most surfaces. verkürzen | |
| R3-1075 | NuSil Silicone Technology 1 | R3-1075 is a one part, RTV silicone dispersion that has a non-corrosive cure. This product can be used as a protective coating that will prevent erosion and corrosion of various parts and surfaces in rockets, missiles, aircraft and launch equipment. It ca...weiterlesen R3-1075 is a one part, RTV silicone dispersion that has a non-corrosive cure. This product can be used as a protective coating that will prevent erosion and corrosion of various parts and surfaces in rockets, missiles, aircraft and launch equipment. It can also be utilized as a conformal coating for electrical and electronic components including rigid and flexible printed circuit boards. verkürzen | |
| SILIKOFTAL® HTT | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® HTT is a silicone polyester resin for the production of decorative coatings. It is a clear to slightly hazy liquid used for non-stick coatings in combination with Polytetrafluoroethylene (PTFE) and decorative coatings of cookware, household ap...weiterlesen SILIKOFTAL® HTT is a silicone polyester resin for the production of decorative coatings. It is a clear to slightly hazy liquid used for non-stick coatings in combination with Polytetrafluoroethylene (PTFE) and decorative coatings of cookware, household appliances, and electric and gas heaters with a permanent thermal stability of 250°C. Some special features of SILIKOFTAL® HTT include excellent dishwasher detergent resistance, low yellowing, good gloss retention, and without addition of organotin-containing compounds. verkürzen | Request Sample |
| SILIKOFTAL® NON-STICK 60 | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® NON-STICK 60 is an ethoxy-functional silicone polyester resin for release coatings. The product can be used in compliance with FDA 175.300 and BfR XV. | Request Sample |
| Vilacryl 830XM65 | Vil Resins | Vilacryl 830XM65 is a 2-pack non-isocyanate curing acrylic resin with an acid value ranging between 44-52 mg of potassium hydroxide per gram and it contains 65% non-volatile compounds. It can be cross-linked with various epoxy resins and used to coat appl...weiterlesen Vilacryl 830XM65 is a 2-pack non-isocyanate curing acrylic resin with an acid value ranging between 44-52 mg of potassium hydroxide per gram and it contains 65% non-volatile compounds. It can be cross-linked with various epoxy resins and used to coat appliances and interior metal furniture and equipment. verkürzen | |
| Vilacryl 850J52 | Vil Resins | Vilacryl 850J52 is a 2-pack isocyanate curing acrylic resin that can be used in O.E.M and agricultural refinishing applications. This product contains 2.6% hydroxyls and 52% non-volatile compounds. | |
| Vilkyd 107X60 | Vil Resins | Vilkyd 107X60 is a modified short-oil alkyd resin based off of linoleic-rich fatty acids that has been esterified with glycerol. It contains 34% fatty acids and 60% non-volatile compounds and is principally used as fast air drying and hammer finishes. | |
| Vilkyd 153W46 | Vil Resins | Vilkyd 153W46 is a medium-oil alkyd based off of linseed oil that has been esterified with glycerol. This product can be used in fast-drying undercoats, primers, floor paints, or coach and machinery finishes and contains 52% fatty acids and 46% non-volat...weiterlesen Vilkyd 153W46 is a medium-oil alkyd based off of linseed oil that has been esterified with glycerol. This product can be used in fast-drying undercoats, primers, floor paints, or coach and machinery finishes and contains 52% fatty acids and 46% non-volatile compounds. verkürzen | |
| Vilkyd 263LA60 | Vil Resins | Vilkyd 263LA60 is a modified alkyd resin based off of linseed oil that has been esterified with pentaerythritol. This product can be used in high-build and high-gloss machinery paints and contains 60% fatty acids and 60% non-volatile compounds. | |
| Vilkyd 266AH70 | Vil Resins | Vilkyd 266AH70 is a polyurethane alkyd resin based off of linoleic-rich fatty acids that has been esterified with pentaerythritol. This product can be used in agricultural, floor, or machinery finishes with high wear resistance and contains 60% fatty acid...weiterlesen Vilkyd 266AH70 is a polyurethane alkyd resin based off of linoleic-rich fatty acids that has been esterified with pentaerythritol. This product can be used in agricultural, floor, or machinery finishes with high wear resistance and contains 60% fatty acids and 70% non-volatile compounds. verkürzen | |
| Vilkyd 273LA55 | Vil Resins | Vilkyd 273LA55 is a medium oil alkyd based off of mixed fatty acids that has been esterified with pentaerythritol. This product can be used in radiator enamels that exhibit high resistance to yellowing and contains 38% fatty acids and 55% non-volatile com...weiterlesen Vilkyd 273LA55 is a medium oil alkyd based off of mixed fatty acids that has been esterified with pentaerythritol. This product can be used in radiator enamels that exhibit high resistance to yellowing and contains 38% fatty acids and 55% non-volatile compounds. verkürzen | |
| Vilkyd 299LA55 | Vil Resins | Vilkyd 299LA55 is a polyurethane alkyd based off of linoleic-rich fatty acids that has been esterified with a mixture of alcohols. This product can be used in agricultural, floor, or machinery finishes with high wear resistance and it contains 50% fatty a...weiterlesen Vilkyd 299LA55 is a polyurethane alkyd based off of linoleic-rich fatty acids that has been esterified with a mixture of alcohols. This product can be used in agricultural, floor, or machinery finishes with high wear resistance and it contains 50% fatty acids and 55% non-volatile compounds. verkürzen | |
| Vilkyd 728LA50 | Vil Resins | Vilkyd 728LA50 is a medium-oil alkyd resin based off of linoleic-rich fatty acids that has been esterified with pentaerythritol. This product can be used in quick-drying machinery enamels or undercoats that do not yellow and contains 52% fatty acids and 5...weiterlesen Vilkyd 728LA50 is a medium-oil alkyd resin based off of linoleic-rich fatty acids that has been esterified with pentaerythritol. This product can be used in quick-drying machinery enamels or undercoats that do not yellow and contains 52% fatty acids and 50% non-volatile compounds. verkürzen | |
| WorléeCryl® A 2445 (60% In Xylene/Solvesso 100/Butyl Acetate 2:1:1) | Worlée-Chemie G.m.b.H. | W´Cryl A 2445 ist ein mit Polyisocyanaten vernetzbares Acrylatharz. | |
| WorléeKyd S 549 (55% In White Spirit 135-175) | Worlée-Chemie G.m.b.H. | W´Kyd S 549 ist ein niedrigviskoses, mittelöliges, schnelltrocknendes Alkydharz für den universellen Einsatz in luft- und wärmetrocknenden Industrie-, Fahrzeug- und Maschinenlacken, außerdem für schnelltrocknende do-it-yourself und Heizkörperlacke. | |
| WorléeKyd S 549 (55% In White Spirit 145-195) | Worlée-Chemie G.m.b.H. | W´Kyd S 549 ist ein niedrigviskoses, mittelöliges, schnelltrocknendes Alkydharz für den universellen Einsatz in luft- und wärmetrocknenden Industrie-, Fahrzeug- und Maschinenlacken, außerdem für schnelltrocknende do-it-yourself und Heizkörperlacke. Maschi...weiterlesen W´Kyd S 549 ist ein niedrigviskoses, mittelöliges, schnelltrocknendes Alkydharz für den universellen Einsatz in luft- und wärmetrocknenden Industrie-, Fahrzeug- und Maschinenlacken, außerdem für schnelltrocknende do-it-yourself und Heizkörperlacke. Maschinenlacken, außerdem für schnelltrocknende do-it-yourself und Heizkörperlacke. verkürzen | |
| WorléeKyd SO 554 | Worlée-Chemie G.m.b.H. | WorléeKyd SO 554 ist ein mittelöliges, schnelltrocknendes Alkydharz für lufttrocknende Industrie-, Fahrzeug- und Maschinenlacke, außerdem für geruchsmilde, entaromatisierte do-it-yourself-Lacksysteme. | |
| WorléeKyd V 162 | Worlée-Chemie G.m.b.H. | W´Kyd V 162 ist ein mittelfettes, schnelltrocknendes Alkydharz für den universellen Einsatz in luft- und wärmetrocknenden Industrie-, Fahrzeug-, Maschinen- und Heizkörperlacken. | |
| WorléeKyd V 543 (55% In White Spirit 145-195) | Worlée-Chemie G.m.b.H. | W´Kyd V 543 ist ein mittelöliges, schnelltrocknendes Alkydharz für den universellen Einsatz in luft- und wärmetrocknenden Industrie-, Fahrzeug- und Maschinenlacken; außerdem für schnelltrocknende Do-it-yourself- und Heizkörperlacke. | |
| WorléeKyd V 543 (55% In White Spirit 145-195/ XYLENE) | Worlée-Chemie G.m.b.H. | W´Kyd V 543 ist ein mittelöliges, schnelltrocknendes Alkydharz für den universellen Einsatz in luft- und wärmetrocknenden Industrie-, Fahrzeug- und Maschinenlacken; außerdem für schnelltrocknende do-it-yourself- und Heizkörperlacke. |
