| 4770-X-60 Short Oil Alkyd Resin | Gabriel Performance Products | 4770-X-60 Short Oil Alkyd Resin is a non-drying short oil alkyd resin containing coconut oil. Typical uses include plasticizer for nitrocellulose lacquers, and high quality low yellowing baking enamels with excellent durability. | |
| 4915-PMA-85 High Solids Short Oil Alkyd | Gabriel Performance Products | 4915-PMA-85 High Solids Short Oil Alkyd which is cut to 85% non-volatile in PM Acetate Solvent. This resin has good cure response with melamine/butylated melamine type resins and offers a fast reduction curve in aromatic and oxygenated solvents. | |
| 4929-X-50 Silicone Modified Short Oil Alkyd | Gabriel Performance Products | 4929-X-50 Silicone Modified Short Oil Alkyd is a fast air dry silicone modified alkyd for applications requiring good gloss retention and/or heat resistance. Applications include industrial and OEM finishes. | |
| 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd | Gabriel Performance Products | 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd based on tall oil. It is recommended for high solids industrial enamels and primers. This resin has an extremely fast set time and rate of through dry. | |
| 4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil | Gabriel Performance Products | 4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil can be used for air dry, force dry, and baking applications and is intended for industrial and OEM coatings. | |
| Atresal C 25/60 SN | Atcoat GmbH | Atresal C 25/60 SN is short oil alkyd resin, consisting of high quality fatty acid and whit spirit, suitable for the formulation of filler, primer, and single coat paints and lacquer with low yellowing. Atcoat alkyd resins are based on natural raw materia...weiterlesen Atresal C 25/60 SN is short oil alkyd resin, consisting of high quality fatty acid and whit spirit, suitable for the formulation of filler, primer, and single coat paints and lacquer with low yellowing. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C 25/60 SN has an oil length of 29 a solid of 60%, and a viscosity of 110 to 150 sec. verkürzen | |
| Atresal C 32/75 BA | Atcoat GmbH | Atresal C 32/75 BA is short oil alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for 2K coatings, NC coatings, enamels, and is especially recommended for the formulation of fast drying primer, single coat paints and lacquer wit...weiterlesen Atresal C 32/75 BA is short oil alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for 2K coatings, NC coatings, enamels, and is especially recommended for the formulation of fast drying primer, single coat paints and lacquer with low yellowing. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C 32/75 BA has an oil length of 32 a solid of 75%, and a viscosity of 20 to 35 s (50% DIN4). verkürzen | |
| Atresal F 26/60 X | Atcoat GmbH | Atresal F 26/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for the formulation of fast drying filler, primer, and single coat paints and lacquer with low yellowing. Atcoat alkyd resins are based on natural raw m...weiterlesen Atresal F 26/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for the formulation of fast drying filler, primer, and single coat paints and lacquer with low yellowing. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal F 26/60 X has an oil length of 27 a solid of 60%, and a viscosity of 90 to 120 s (50% DIN4). verkürzen | |
| Atresal K1297/65 X | Atcoat GmbH | Atresal K1297/65 X is short oil alkyd resin, consisting of soya and xylene, suitable for air drying top coatings with high durability. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K1297/65 X has an oi...weiterlesen Atresal K1297/65 X is short oil alkyd resin, consisting of soya and xylene, suitable for air drying top coatings with high durability. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K1297/65 X has an oil length of 39 a solid of 65%, and a viscosity of 3000 to 4000 mPas. verkürzen | |
| Atresal K1485/60 X | Atcoat GmbH | Atresal K1485/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, with low yellowing, good weather resistance, hardness, adhesion, and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plan...weiterlesen Atresal K1485/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, with low yellowing, good weather resistance, hardness, adhesion, and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K1485/60 X has an oil length of 33 a solid of 60%, and a viscosity of 34 to 46 dPas. verkürzen | |
| Atresal K1485/75 BA | Atcoat GmbH | Atresal K1485/75 BA is short oil alkyd resin, consisting of vegetable oil and butylacetat, with through drying, fast surface, low yellowing, weather resistance, hardness, and good adhesion. Atcoat alkyd resins are based on natural raw materials like fatty...weiterlesen Atresal K1485/75 BA is short oil alkyd resin, consisting of vegetable oil and butylacetat, with through drying, fast surface, low yellowing, weather resistance, hardness, and good adhesion. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K1485/75 BA has an oil length of 33 a solid of 75%, and a viscosity of 200 to 300 dPas. verkürzen | |
| Atresal K1485HS/80 X | Atcoat GmbH | Atresal K1485HS/80 X is short oil alkyd resin, consisting of vegetable oil and solvent naphta 150, with good hardness, adhesion, surface, through drying, and low yellowing. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, an...weiterlesen Atresal K1485HS/80 X is short oil alkyd resin, consisting of vegetable oil and solvent naphta 150, with good hardness, adhesion, surface, through drying, and low yellowing. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K1485HS/80 X has an oil length of 33 a solid of 80%, and a viscosity of 400 to 500 dPas. verkürzen | |
| Atresal K1552/50 KY | Atcoat GmbH | Atresal K1552/50 KY is short oil alkyd resin, consisting of fatty acid, white spirit, and further solvent additives, that is suitable for fast air drying industrial coatings with good hardness, water resistant, and high body and gloss. Atcoat alkyd resins...weiterlesen Atresal K1552/50 KY is short oil alkyd resin, consisting of fatty acid, white spirit, and further solvent additives, that is suitable for fast air drying industrial coatings with good hardness, water resistant, and high body and gloss. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K1552/50 KY has an oil length of 29, a solid of 50%, and a viscosity of 190 to 250 sec. verkürzen | |
| Atresal K2253/75 SN | Atcoat GmbH | Atresal K2253/75 SN is high solid short oil alkyd resin, consisting of talloil fatty acid and solvent naphta 150, suitable for industrial paints with good weather resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, ...weiterlesen Atresal K2253/75 SN is high solid short oil alkyd resin, consisting of talloil fatty acid and solvent naphta 150, suitable for industrial paints with good weather resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K2253/75 SN has an oil length of 41 a solid of 75%, and a viscosity of 90 to 125 dPas. verkürzen | |
| Atresal K251/75 X | Atcoat GmbH | Atresal K251/75 X is low viscous short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for NC, SH, and PUR coatings with color stable stoving paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plan...weiterlesen Atresal K251/75 X is low viscous short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for NC, SH, and PUR coatings with color stable stoving paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K251/75 X has an oil length of 25 a solid of 75%, and a viscosity of 85 to 135 dPas. verkürzen | |
| Atresal K2789/55 X SN | Atcoat GmbH | Atresal K2789/55 X SN is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for baking enamels up to 150°C, NC-, 2-K-PUR- coatings, adhesive masses, and SH- coatings. Atcoat alkyd resins are based on natural raw materials l...weiterlesen Atresal K2789/55 X SN is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for baking enamels up to 150°C, NC-, 2-K-PUR- coatings, adhesive masses, and SH- coatings. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K2789/55 X SN has an oil length of 29 and a solid of 55%. verkürzen | |
| Atresal K280/60 X | Atcoat GmbH | Atresal K280/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for primers and top coats with oven and air drying; it is also compatible with PVC copolymer. Atcoat alkyd resins are based on natural raw materials lik...weiterlesen Atresal K280/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for primers and top coats with oven and air drying; it is also compatible with PVC copolymer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K280/60 X has an oil length of 28 a solid of 60%, and a viscosity of 90 to 110 sec. verkürzen | |
| Atresal K2851/55 K2 | Atcoat GmbH | Atresal K2851/55 K2 is short oil alkyd resin, consisting of talloil, tung, and white spirit, suitable for the production of primers, fillers, oven and air drying putties, and has good adhesion strength on steel. Atcoat alkyd resins are based on natural ra...weiterlesen Atresal K2851/55 K2 is short oil alkyd resin, consisting of talloil, tung, and white spirit, suitable for the production of primers, fillers, oven and air drying putties, and has good adhesion strength on steel. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K2851/55 K2 has an oil length of 40, a solid of 55%, and a viscosity of 90 to 130 sec. verkürzen | |
| Atresal K29/60 X | Atcoat GmbH | Atresal K29/60 X is short oil alkyd resin, consisting of dehydrated castor oil and xylene, suitable for machine paints, stove drying lacquers and primers, car repair lacquers, highly reactive resin, and NC and AC coatings. Atcoat alkyd resins are based on...weiterlesen Atresal K29/60 X is short oil alkyd resin, consisting of dehydrated castor oil and xylene, suitable for machine paints, stove drying lacquers and primers, car repair lacquers, highly reactive resin, and NC and AC coatings. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K29/60 X has an oil length of 29 a solid of 60%, and a viscosity of 65 to 80 sec. verkürzen | |
| Atresal K30/60 X | Atcoat GmbH | Atresal K30/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for the production of top coats, one coat, primers, and dipping paints with through drying and good surface. Atcoat alkyd resins are based on natural raw...weiterlesen Atresal K30/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for the production of top coats, one coat, primers, and dipping paints with through drying and good surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K30/60 X has an oil length of 30 a solid of 60%, and a viscosity of 65 to 85 sec. verkürzen | |
| Atresal K32/75 BA | Atcoat GmbH | Atresal K32/75 BA is short oil alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for the production of top coats, one coat, primers, and dipping paints with good drying. Atcoat alkyd resins are based on natural raw materials lik...weiterlesen Atresal K32/75 BA is short oil alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for the production of top coats, one coat, primers, and dipping paints with good drying. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K32/75 BA has an oil length of 32 a solid of 75%, and a viscosity of 100 to 130 dPas. verkürzen | |
| Atresal K35/60 X | Atcoat GmbH | Atresal K35/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for high quality stoving enamels and color stable up to 150°C. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal...weiterlesen Atresal K35/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for high quality stoving enamels and color stable up to 150°C. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K35/60 X has an oil length of 35 a solid of 60%, and a viscosity of 55 to 75 sec. verkürzen | |
| Atresal K370/60 X | Atcoat GmbH | Atresal K370/60 X is short oil alkyd resin, consisting of linseed, talloil, and xylene, suitable for fillers and primers. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K370/60 X has an oil length of 36...weiterlesen Atresal K370/60 X is short oil alkyd resin, consisting of linseed, talloil, and xylene, suitable for fillers and primers. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K370/60 X has an oil length of 36 a solid of 60%, and a viscosity of 150 to 190 sec. verkürzen | |
| Atresal K381/50 K2 | Atcoat GmbH | Atresal K381/50 K2 is short oil alkyd resin, consisting of vegetable oil and white spirit, suitable for corrosion resistant fillers, primers, putties that is flexible, fast drying, and stable on storage with alkaline pigments. Atcoat alkyd resins are base...weiterlesen Atresal K381/50 K2 is short oil alkyd resin, consisting of vegetable oil and white spirit, suitable for corrosion resistant fillers, primers, putties that is flexible, fast drying, and stable on storage with alkaline pigments. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K381/50 K2 has an oil length of 38, a solid of 50%, and a viscosity of 70 to 110 sec. verkürzen | |
| Atresal K381/60 X | Atcoat GmbH | Atresal K381/60 X is short oil alkyd resin, consisting of vegetable oil and xylene, suitable for putties, fillers, and corrosion resistant primers with fast drying, flexible, and is stable on storage with alkaline pigments. Atcoat alkyd resins are based o...weiterlesen Atresal K381/60 X is short oil alkyd resin, consisting of vegetable oil and xylene, suitable for putties, fillers, and corrosion resistant primers with fast drying, flexible, and is stable on storage with alkaline pigments. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K381/60 X has an oil length of 38 a solid of 60%, and a viscosity of 120 to 170 sec. verkürzen | |
| Atresal K40/75 BA | Atcoat GmbH | Atresal K40/75 BA is low viscous peanut short oil alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for the production of high solid nitro combined and acid curing lacquers with good light-fastness, flexibility, hardness, and fa...weiterlesen Atresal K40/75 BA is low viscous peanut short oil alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for the production of high solid nitro combined and acid curing lacquers with good light-fastness, flexibility, hardness, and fast solvent release. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K40/75 BA has an oil length of 39 a solid of 75%, and a viscosity of 100 to 130 dPas. verkürzen | |
| Atresal K410/75 BA | Atcoat GmbH | Atresal K410/75 BA is short oil alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for NC and PUR coatings, baking enamels, and non-yellowing furniture paints. Atcoat alkyd resins are based on natural raw materials like fatty aci...weiterlesen Atresal K410/75 BA is short oil alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for NC and PUR coatings, baking enamels, and non-yellowing furniture paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K410/75 BA has an oil length of 41 a solid of 75%, and a viscosity of 30 to 45 sec. verkürzen | |
| Atresal SO 32/60 X | Atcoat GmbH | Atresal SO 32/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for 2K coatings, NC, enamels, and is especially recommended for the formulation of fast drying primer, single coat paints and lacquers with low yellowi...weiterlesen Atresal SO 32/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for 2K coatings, NC, enamels, and is especially recommended for the formulation of fast drying primer, single coat paints and lacquers with low yellowing. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal SO 32/60 X has an oil length of 32 a solid of 60%, and a viscosity of 750 to 1200 mPas (50°C). verkürzen | |
| Atresal SO 485/60 X | Atcoat GmbH | Atresal SO 485/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for fast drying paints with good weather resistance, low yellowing, good adhesion, chalking resistance, flexibility, hardness, and is also recommended...weiterlesen Atresal SO 485/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for fast drying paints with good weather resistance, low yellowing, good adhesion, chalking resistance, flexibility, hardness, and is also recommended for machinery enamels and industrial coatings. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal SO 485/60 X has an oil length of 33 a solid of 60%, and a viscosity of 3.8 to 4.8 Pas. verkürzen | |
| Atresal SO 498/65 BA | Atcoat GmbH | Atresal SO 498/65 BA is short oil alkyd resin, consisting of castor oil and butylacetat, suitable for industrial coatings with good hardness and abrasion resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and anima...weiterlesen Atresal SO 498/65 BA is short oil alkyd resin, consisting of castor oil and butylacetat, suitable for industrial coatings with good hardness and abrasion resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal SO 498/65 BA has an oil length of 42 a solid of 65%, and a viscosity of 1600 to 2600 mPas. verkürzen | |
| Atresal SO 980/70 EM | Atcoat GmbH | Atresal SO 980/70 EM is short oil alkyd resin, consisting of talloil fatty acid and ethoxy-, methoxypropanol, in combination with amino resin for acid curing lacquers with high solid content, low yellowing, fast drying, and good stability. Atcoat alkyd re...weiterlesen Atresal SO 980/70 EM is short oil alkyd resin, consisting of talloil fatty acid and ethoxy-, methoxypropanol, in combination with amino resin for acid curing lacquers with high solid content, low yellowing, fast drying, and good stability. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal SO 980/70 EM has an oil length of 39 a solid of 70%, and a viscosity of 6 to 8 Pas. verkürzen | |
| BAS 302 X-60 | Bonyan Kala Chemie Co. | BAS 302 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-80 stoke at 25°C and is mainly used in...weiterlesen BAS 302 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-80 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, amino resin based stoving paints, acid curing coatings, and printing inks. verkürzen | |
| BAS 305 X-50 | Bonyan Kala Chemie Co. | BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in...weiterlesen BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in hammer finish paints, anti-corrosion primers, fast dry paints, and industrial air-drying paints. verkürzen | |
| BAS 307 X-60 | Bonyan Kala Chemie Co. | BAS 307 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 250-450 stoke at 25°C and is mainly used ...weiterlesen BAS 307 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 250-450 stoke at 25°C and is mainly used in nitro-cellulose lacquers, amino resin based stoving paints, acid curing coatings, and auto parts stoving paints. verkürzen | |
| BAS 310 H X-60 | Bonyan Kala Chemie Co. | BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly use...weiterlesen BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. verkürzen | |
| BAS 310 L X-60 | Bonyan Kala Chemie Co. | BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly use...weiterlesen BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. verkürzen | |
| BAS 312 X-60 | Bonyan Kala Chemie Co. | BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used i...weiterlesen BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. verkürzen | |
| BAS 313 X-60 | Bonyan Kala Chemie Co. | BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used...weiterlesen BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. verkürzen | |
| Benasol AS 280 | Benasedo | Benasol AS 280 is used in fast air-drying and low-bake enamels with excellent chemical resistance. It is made from soya oil and has a 28% oil content. It contains 60% solids, has a viscosity [G.H.] of Y-Z1, an A.V. solids amount of 6-15, and a colour [G.H...weiterlesen Benasol AS 280 is used in fast air-drying and low-bake enamels with excellent chemical resistance. It is made from soya oil and has a 28% oil content. It contains 60% solids, has a viscosity [G.H.] of Y-Z1, an A.V. solids amount of 6-15, and a colour [G.H.] maximum of 5. This product has applications for air, bake, nitro and catalyze. verkürzen | Request Sample |
| Benasol AS 379 | Benasedo | Benasol AS 379 is used in fast air-drying white and coloured enamels for industrial applications. It is made from special fatty acids with 43% oil content and 60% solids content. This product has a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of 6-12,...weiterlesen Benasol AS 379 is used in fast air-drying white and coloured enamels for industrial applications. It is made from special fatty acids with 43% oil content and 60% solids content. This product has a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of 6-12, and a color [G.H.] maximum of 5. It has application for air. verkürzen | Request Sample |
| Benasol CO 35 in Xylene | Benasedo | Benasol CO 35 in Xylene is used in very fast air-drying enamels for industrial applications and traffic-paints. It is made using soya fatty acids, with a 44% oil content. It has a viscosity [G.H.] of Z2-Z4, a 60% solids amount, an A.V. solids content of 6...weiterlesen Benasol CO 35 in Xylene is used in very fast air-drying enamels for industrial applications and traffic-paints. It is made using soya fatty acids, with a 44% oil content. It has a viscosity [G.H.] of Z2-Z4, a 60% solids amount, an A.V. solids content of 6-15, and a colour [G.H.] of maximum 8. This product has air applications. verkürzen | Request Sample |
| Benasol CO 35 in Xylene/Butylacetate | Benasedo | Benasol CO 35 in Xylene/Butylacetate is used in very fast air-drying enamels for industrial applications and traffic-paints, and also has air applications. It is made using soya fatty acids, with a 44% oil content. It has a viscosity [G.H.] of Z2-Z3, a 65...weiterlesen Benasol CO 35 in Xylene/Butylacetate is used in very fast air-drying enamels for industrial applications and traffic-paints, and also has air applications. It is made using soya fatty acids, with a 44% oil content. It has a viscosity [G.H.] of Z2-Z3, a 65% solids amount, an A.V. solids content of 6-15, and a colour [G.H.] of maximum 4. verkürzen | Request Sample |
| Benasol CO 37 in BUTYL ACETATE | Benasedo | Benasol CO 37 in BUTYL ACETATE is used in very fast non-yellowing air-drying enamels for exterior applications, particularly farm equipment. It is made using special fatty acids and Urethane Aliphatic, and has a 37% oil content. This product contains 65% ...weiterlesen Benasol CO 37 in BUTYL ACETATE is used in very fast non-yellowing air-drying enamels for exterior applications, particularly farm equipment. It is made using special fatty acids and Urethane Aliphatic, and has a 37% oil content. This product contains 65% solids, a viscosity [G.H.] of Z1-Z2, an A.V. solids content of 5-12, and a color [G.H.] maximum of 4. This product has air applications. verkürzen | Request Sample |
| C-1025 | Macro Polymers Pvt. Ltd. | C-1025 is a short oil, glycerol-esterified alkyd resin that has been modified with saturated fatty acids. This product shows high gloss, good hardness and flexibility in stoving enamels. If used in nitrocellulose lacquers, it has very good yellowing res...weiterlesen C-1025 is a short oil, glycerol-esterified alkyd resin that has been modified with saturated fatty acids. This product shows high gloss, good hardness and flexibility in stoving enamels. If used in nitrocellulose lacquers, it has very good yellowing resistance, flexibility and durability. It can be used in white baking enamels and in wood coatings. verkürzen | |
| C-1030 | Macro Polymers Pvt. Ltd. | C-1030 is a short oil glycerol esterified alkyd resin that has been modified with a saturated fatty acid. This product provides high gloss, good hardness, flexibility and yellowing resistance in stoving enamels. It can be used in stoving enamels for aut...weiterlesen C-1030 is a short oil glycerol esterified alkyd resin that has been modified with a saturated fatty acid. This product provides high gloss, good hardness, flexibility and yellowing resistance in stoving enamels. It can be used in stoving enamels for automotive and kitchen appliance applications. It can also be used in clear and pigmented nitrocellulose lacquer for furniture and automotives. verkürzen | |
| C-1031 | Macro Polymers Pvt. Ltd. | C-1031 is a short oil glycerol-esterified alkyd resin that has been modified with a saturated fatty acid. This product provides high gloss, good hardness, yellowing resistance, and flexibility in stoving enamels. It can be used in white baking enamels a...weiterlesen C-1031 is a short oil glycerol-esterified alkyd resin that has been modified with a saturated fatty acid. This product provides high gloss, good hardness, yellowing resistance, and flexibility in stoving enamels. It can be used in white baking enamels and wood coatings. verkürzen | |
| Coconut-Oil Based Short Oil Alkyd Resin | Tianyi Chemical Engineering Material Co., Ltd. | Coconut-Oil Based Short Oil Alkyd Resin, in the form of a waterborne, white viscous liquid, is an additive that can be used in polyester urethane gloss coatings, polyester surface coatings, acid-cured paints, and nitrocellulose coatings. This product dri...weiterlesen Coconut-Oil Based Short Oil Alkyd Resin, in the form of a waterborne, white viscous liquid, is an additive that can be used in polyester urethane gloss coatings, polyester surface coatings, acid-cured paints, and nitrocellulose coatings. This product dries quickly, and the end product will have high gloss and resistance to yellowing. verkürzen | |
| Crestakyd® 30-5005 | Scott Bader | Crestakyd® 30-5005 is a quick drying short oil alkyd used for primers and top coats for metal and wood. | |
| Crestakyd® 30-5016 | Scott Bader | Crestakyd® 30-5016 is used for very quick drying industrial paints with good all round properties. | |
| Crestakyd® 30-5049 | Scott Bader | Crestakyd® 30-5049 is a short oil alkyd with excellent cold check properties, good wet heat resistance, good stackability and excellent all round properties. It has been designed for use in acid curing finishes for wood. | |
| Crestakyd® 30-5057 | Scott Bader | Crestakyd® 30-5057 is a fast drying short oil alkyd with excellent stability and cold check properties. It can be used for easy sanding NC sealers and NC finishes. | |
| Crestakyd® 30-5067 | Scott Bader | Crestakyd® 30-5067 is a fast drying short oil alkyd supplied in xylene for use in air dry and force dry primers and topcoats. Also used for marine paints. | |
| Crestakyd® 30-5068 | Scott Bader | Crestakyd® 30-5068 is a fast drying short oil alkyd for use in air-dry and force-dry primers and topcoats. It is recommended for use in air dry and force dry primers and topcoats in a variety of general industrial metal coating applications. | |
| Crestakyd® 30-5071 | Scott Bader | Crestakyd® 30-5071 exhibits rapid drying characteristics and fast hardness development. It has very good weather resistance, excellent film build and attractive gloss. It can be used for NC finishes, acid hardening finishes and in combination with low rea...weiterlesen Crestakyd® 30-5071 exhibits rapid drying characteristics and fast hardness development. It has very good weather resistance, excellent film build and attractive gloss. It can be used for NC finishes, acid hardening finishes and in combination with low reactivity melamine resins for industrial stoving enamels and automotive finishes. verkürzen | |
| Crestakyd® 30-9055 | Scott Bader | Crestakyd® 30-9055 is a wood finishing alkyd used in nitrocellulose primers and top coats. | |
| Crestakyd® 30-9502 | Scott Bader | Crestakyd® 30-9502 is a short oil alkyd for high solids top coats with good colour and drying properties. | |
| D-2040M | Macro Polymers Pvt. Ltd. | D-2040M is a short oil, glycerol-esterified alkyd resin that has been modified with monomeric dehydrated castor oil. This product has rapid curing and good yellowing resistance in stoving enamels. It also has excellent flexibility, with good impact resi...weiterlesen D-2040M is a short oil, glycerol-esterified alkyd resin that has been modified with monomeric dehydrated castor oil. This product has rapid curing and good yellowing resistance in stoving enamels. It also has excellent flexibility, with good impact resistance and adhesion on steel. It can be used as a stoving primer. verkürzen | |
| D-2040MHV | Macro Polymers Pvt. Ltd. | D-2040MHV is a short-oil, glycerol-esterified alkyd resin that has been modified with dehydrated castor oil. This product provides good yellowing resistance, high gloss and good durability with rapid curing in stoving enamels. It can be used in stoving ...weiterlesen D-2040MHV is a short-oil, glycerol-esterified alkyd resin that has been modified with dehydrated castor oil. This product provides good yellowing resistance, high gloss and good durability with rapid curing in stoving enamels. It can be used in stoving enamels for automotive and bicycle applications. It can also be used in stoving primers and acid hardening varnishes. verkürzen | |
| Drokyd™ 6010 | D.R. Coats Ink & Resins Pvt. Ltd. | Drokyd™ 6010 is short oil alkyd having 28% oil length. | |
| Drokyd™ 6020 | D.R. Coats Ink & Resins Pvt. Ltd. | Drokyd™ 6020 is short oil alkyd having 42% oil length. | |
| F-4035 | Macro Polymers Pvt. Ltd. | F-4035 is a short oil, pentaerythritol-esterified alkyd resin that has been modified with soybean fatty acids. This product has excellent yellowing resistance to light and heat, even at high temperatures. When it is used in stoving enamels, it shows hig...weiterlesen F-4035 is a short oil, pentaerythritol-esterified alkyd resin that has been modified with soybean fatty acids. This product has excellent yellowing resistance to light and heat, even at high temperatures. When it is used in stoving enamels, it shows high gloss and good gloss retention. It can be used in white and light-coloured high-quality stoving enamels for automotives, washing machines, refrigerators and kitchen equipment, two-component polyurethane lacquers, and automotive paints for refinishing. verkürzen | |
| F-4035 55% HV | Macro Polymers Pvt. Ltd. | F-4035 55% HV is a short oil, pentaerythritol-esterified alkyd resin that has been modified with soybean fatty acids. This product shows excellent resistance to light and heat, even at high temperatures. When it is used in stoving enamels, it shows high...weiterlesen F-4035 55% HV is a short oil, pentaerythritol-esterified alkyd resin that has been modified with soybean fatty acids. This product shows excellent resistance to light and heat, even at high temperatures. When it is used in stoving enamels, it shows high gloss and high gloss retention, excellent hardness and flexibility. It can be used in white and light-coloured high-quality stoving enamels for automotives, washing machines, refrigerators, kitchen equipment, two-component polyurethane lacquers, and automotive paints for refinishing applications. verkürzen | |
| F-4038 | Macro Polymers Pvt. Ltd. | F-4038 is a short oil, pentaerythritol-esterified alkyd resin that has been modified with soybean fatty acids. This product shows excellent resistance to light and heat, even at high temperatures, When used in stoving enamels, it has very high gloss and ...weiterlesen F-4038 is a short oil, pentaerythritol-esterified alkyd resin that has been modified with soybean fatty acids. This product shows excellent resistance to light and heat, even at high temperatures, When used in stoving enamels, it has very high gloss and good gloss retention, excellent hardness and flexibility. It can be used in white and light-coloured high-quality stoving enamels for automotives, washing machines, refrigerators, kitchen equipment, two component polyurethane lacquers, and and automotive paints in refinishing applications. verkürzen | |
| F-4043 | Macro Polymers Pvt. Ltd. | F-4043 is a short oil, pentaerythritol-esterified alkyd resin that has been modified with soybean fatty acids. This product shows excellent resistance to yellowing in light and heat, even at high temperatures. If used in stoving enamels, it shows very h...weiterlesen F-4043 is a short oil, pentaerythritol-esterified alkyd resin that has been modified with soybean fatty acids. This product shows excellent resistance to yellowing in light and heat, even at high temperatures. If used in stoving enamels, it shows very high gloss and good gloss retention, excellent hardness and flexibility. It can be used in white and light-coloured high-quality stoving enamels for automotives, washing machines, refrigerators and kitchen equipment, two-component polyurethane lacquers, and automotive paints for refinishing applications. verkürzen | |
| HS11-70C | Tianyi Chemical Engineering Material Co., Ltd. | HS11-70C, in the form of a light yellow, transparent, viscous liquid, is a soya-oil based short oil alkyd resin that can be used in polyurethane and polyester high-gloss surface paints. This product has a high carboxyl group content, which makes the end ...weiterlesen HS11-70C, in the form of a light yellow, transparent, viscous liquid, is a soya-oil based short oil alkyd resin that can be used in polyurethane and polyester high-gloss surface paints. This product has a high carboxyl group content, which makes the end product dry faster. The end product will also have a brighter color and higher hardness. verkürzen | |
| HS11-70D | Tianyi Chemical Engineering Material Co., Ltd. | HS11-70D, in the form of a light yellow, transparent, viscous liquid, is a soya-oil based short oil alkyd resin that can be used in polyurethane matte exterior coatings and primers. This product has a high carboxyl group content, which makes the end prod...weiterlesen HS11-70D, in the form of a light yellow, transparent, viscous liquid, is a soya-oil based short oil alkyd resin that can be used in polyurethane matte exterior coatings and primers. This product has a high carboxyl group content, which makes the end product dry faster. The end product will also have a brighter color and higher hardness. verkürzen | |
| Italkid KR 543 | Galstaff Multiresine S.p.A. | Italkid KR 543 is a short-oil alkyd resin, castor-oil and vegetable fatty acid modified, used for 2K-PU coatings for wood both for primers and mat finishes. It's main characteristics are fast hardening, good coverage, hardness and toughness, good solvent ...weiterlesen Italkid KR 543 is a short-oil alkyd resin, castor-oil and vegetable fatty acid modified, used for 2K-PU coatings for wood both for primers and mat finishes. It's main characteristics are fast hardening, good coverage, hardness and toughness, good solvent release and long pot-life. verkürzen | |
| LIOPTAL 541 | Synthopol Chemie Germany | LIOPTAL 541 is a short-oil alkyd resin modified with phenol resin. Because of its composition, Lioptal 541 is a special-purpose binder for air- and stove-drying primers with very short drying times and excellent overspray tolerance. Through combination wi...weiterlesen LIOPTAL 541 is a short-oil alkyd resin modified with phenol resin. Because of its composition, Lioptal 541 is a special-purpose binder for air- and stove-drying primers with very short drying times and excellent overspray tolerance. Through combination with other short-oil or medium-oil drying alkyd resin, epoxy esters and urea or melamine resins a wide range of possibilities are obtained not only in the primer sector but also for fast-drying industrial coatings. verkürzen | |
| LIOPTAL 836 | Synthopol Chemie Germany | LIOPTAL 836 is a short-oil drying alkyd resin. It is suitable for use in air-drying primers, as well as single and top coats. It has good dipping bath stability. The low oil content of Lioptal 836 yields very quick-drying glossy top coats. With forced dry...weiterlesen LIOPTAL 836 is a short-oil drying alkyd resin. It is suitable for use in air-drying primers, as well as single and top coats. It has good dipping bath stability. The low oil content of Lioptal 836 yields very quick-drying glossy top coats. With forced drying, e.g. 30 min / 80°C, very hard films are obt ained within a short period of time. Dipping coatings based on Lioptal 836 have excellent tank stability. The possibility of combining with clorinated vinyl polymers (e.g. Laroflax) is also worth mentioning. verkürzen | |
| LIOPTAL ES 43 | Synthopol Chemie Germany | LIOPTAL ES 43 is a short-oil alkyd resin supplied as 70% in butyl acetate. It can be used in combination with nitrocellulose for wood and metal finishes with rapid solvent evaporation and good resistance to water and alcohol. This product can also be used...weiterlesen LIOPTAL ES 43 is a short-oil alkyd resin supplied as 70% in butyl acetate. It can be used in combination with nitrocellulose for wood and metal finishes with rapid solvent evaporation and good resistance to water and alcohol. This product can also be used in combination with unplasticized urea or melamine resins for stove-drying industrial coatings; 1- and 2-component AC coatings; as the hydroxyl component in PUR coatings. verkürzen | |
| LIOPTAL TH 406 | Synthopol Chemie Germany | LIOPTAL TH 406 is a short-oil alkyd resin modified with phenol resin. It is suitable for use in fast-drying anti-corrosive primers and synthetic resin-based paints, shop primers, knife fillers, and stove-drying industrial primers and topcoats. | |
| Nebores® A 39-60 X | NECARBO B.V. | Nebores® A 39-60 X is a short oil alkyd resin based on arachide oil consisting of 60% xylene. This light yellow liquid functions as a non-drying alkyd resin with filling power. Nebores® A 39-60 X can be used in combination with nitrocellulose in metal an...weiterlesen Nebores® A 39-60 X is a short oil alkyd resin based on arachide oil consisting of 60% xylene. This light yellow liquid functions as a non-drying alkyd resin with filling power. Nebores® A 39-60 X can be used in combination with nitrocellulose in metal and wood paints for fast drying, elasticity, and hardness, and in combination with U.F. resins in acid curing lacquers for fast drying and through hardening. verkürzen | |
| Nebores® A 39-75 BA | NECARBO B.V. | Nebores® A 39-75 BA is a short oil alkyd resin based on arachide oil and is delivered 75% in butylacetate. This light yellow liquid functions as a non-drying alkyd resin with filling power. Nebores® A 39-75 BA can be used in combination with nitrocellulos...weiterlesen Nebores® A 39-75 BA is a short oil alkyd resin based on arachide oil and is delivered 75% in butylacetate. This light yellow liquid functions as a non-drying alkyd resin with filling power. Nebores® A 39-75 BA can be used in combination with nitrocellulose in metal and wood paints for fast drying, elasticity, and hardness, and in combination with U.F. resins in acid curing lacquers for fast drying and through hardening. verkürzen | |
| Nebores® R 31-55 X | NECARBO B.V. | Nebores® R 31-55 X is a short oil alkyd resin based on dehydrated castor oil. It provides good elasticity, excellent adhesion, and good colour retention properties. This product finds application in stoving enamels and primers for general industrial use. | |
| Nebores® R 44-55 X | NECARBO B.V. | Nebores® R 44-55 X is a short oil alkyd resin based on glycerol-esterified, dehydrated castor oil. It provides good pigment loading, low yellowing, excellent adhesion, and very good hardness, elasticity, gloss retention, and weather resistance properties....weiterlesen Nebores® R 44-55 X is a short oil alkyd resin based on glycerol-esterified, dehydrated castor oil. It provides good pigment loading, low yellowing, excellent adhesion, and very good hardness, elasticity, gloss retention, and weather resistance properties. This product finds application in stoving enamels and industrial & automotive primers. verkürzen | |
| Nebores® SMB 35-60 X | NECARBO B.V. | Nebores® SMB 35-60 X is an air-drying short alkyd resin based on trimethylolpropane-esterified vegetable fatty acids. It provides extremely fast drying properties, good yellowing resistance, and excellent adhesion to steel. This product finds application ...weiterlesen Nebores® SMB 35-60 X is an air-drying short alkyd resin based on trimethylolpropane-esterified vegetable fatty acids. It provides extremely fast drying properties, good yellowing resistance, and excellent adhesion to steel. This product finds application in fast-drying industrial lacquers, anti-corrosive primers, and general purpose stoving enamels. verkürzen | |
| Nebores® SMB 402-60 X | NECARBO B.V. | Nebores® SMB 402-60 X is an air-drying, short oil alkyd resin based on a special fatty acid mixture. It is PVC copolymer-compatible and provides excellent drying properties. This product finds application in quick-drying industrial primers & fillers, top-...weiterlesen Nebores® SMB 402-60 X is an air-drying, short oil alkyd resin based on a special fatty acid mixture. It is PVC copolymer-compatible and provides excellent drying properties. This product finds application in quick-drying industrial primers & fillers, top-quality industrial lacquers, and general purpose stoving enamels. verkürzen | |
| Novalkyd S1000-60X | Novaresine S.r.l | Novalkyd S1000-60X is a short oil, drying alkyd that has a fast cure rate with the resultant coatings showing good hardness, build and gloss, along with early water and overspray resistance. The resin is particularly designed for fast air-drying industria...weiterlesen Novalkyd S1000-60X is a short oil, drying alkyd that has a fast cure rate with the resultant coatings showing good hardness, build and gloss, along with early water and overspray resistance. The resin is particularly designed for fast air-drying industrial enamels. verkürzen | |
| Novalkyd S1002-65BA | Novaresine S.r.l | Novalkyd S1002-65BA is a siccative, short oil alkyd resin which has films characterized by rapid drying times, high hardness in the whole thickness, good brilliance and good overall features. This product is ideal for use in industrial enamels. With isocy...weiterlesen Novalkyd S1002-65BA is a siccative, short oil alkyd resin which has films characterized by rapid drying times, high hardness in the whole thickness, good brilliance and good overall features. This product is ideal for use in industrial enamels. With isocyanates or melamines, it can also be used to create stoving enamels with good overall properties. verkürzen | |
| Novalkyd S1010-70BA | Novaresine S.r.l | Novalkyd S1010-70BA is a short oil alkyd resin that is used to formulate industrial enamels with high hardness development and fast drying and curing. It is a resin with a high solid content designed for high-performance enamels. | |
| Novalkyd S1011-60T | Novaresine S.r.l | Novalkyd S1011-60T is a short oil, drying alkyd that is particularly made for fast air-drying enamels where short drying time and early water resistance are needed. It is especially recommended for traffic paints since it offers low thermoplastic behavior...weiterlesen Novalkyd S1011-60T is a short oil, drying alkyd that is particularly made for fast air-drying enamels where short drying time and early water resistance are needed. It is especially recommended for traffic paints since it offers low thermoplastic behavior and good abrasion resistance. verkürzen | |
| Novalkyd S1012-60X | Novaresine S.r.l | Novalkyd S1012-60X is a short to medium oil alkyd that provides good gloss and gloss retention in quality stoving and air-drying paints, along with good yellowing resistance, even after prolonged outdoor exposure. This product is ideal for use in paints, ...weiterlesen Novalkyd S1012-60X is a short to medium oil alkyd that provides good gloss and gloss retention in quality stoving and air-drying paints, along with good yellowing resistance, even after prolonged outdoor exposure. This product is ideal for use in paints, primers, and stoving and air-drying enamels for metal surface and automotive refinishing applications. verkürzen | |
| Novalkyd S1020-60T | Novaresine S.r.l | Novalkyd S1020-60T is a short oil, siccative alkyd that has been formulated to provide fast drying, solvent release, and hardness development properties. This resin is designed for use in high performance road marking paints and industrial enamels. | |
| Novalkyd S1022-60X | Novaresine S.r.l | Novalkyd S1022-60X is a short oil, non-drying alkyd that has a high color retention, making it suitable for all types of white non-yellowing enamels. These would include baked enamels for metal furniture, along with household appliances and industrial fin...weiterlesen Novalkyd S1022-60X is a short oil, non-drying alkyd that has a high color retention, making it suitable for all types of white non-yellowing enamels. These would include baked enamels for metal furniture, along with household appliances and industrial finishes. When combined with nitrocellulose, it exhibits non-yellowing features, along with high gloss in flexible lacquers and enamels. verkürzen | |
| Novalkyd S1023-50S100 | Novaresine S.r.l | Novalkyd S1023-50S100 is a short oil, non-drying alkyd that has a high color retention, making it ideal for all kinds of white, non-yellowing enamels. It is recommended in baking enamels for metal furniture, household appliances and general industrial fin...weiterlesen Novalkyd S1023-50S100 is a short oil, non-drying alkyd that has a high color retention, making it ideal for all kinds of white, non-yellowing enamels. It is recommended in baking enamels for metal furniture, household appliances and general industrial finishes. When combined with nitrocellulose, it provides high gloss and non-yellowing features. verkürzen | |
| Novalkyd S1099-60X | Novaresine S.r.l | Novalkyd S1099-60X is a short oil, drying, phenolic-modified alkyd that is mainly designed for anti-corrosive, fast air-drying primers and industrial fast air-drying enamels with early water resistance and good overcoating. Novalkyd S1099-60X provides a f...weiterlesen Novalkyd S1099-60X is a short oil, drying, phenolic-modified alkyd that is mainly designed for anti-corrosive, fast air-drying primers and industrial fast air-drying enamels with early water resistance and good overcoating. Novalkyd S1099-60X provides a fast drying rate and good corrosion-resistance properties. verkürzen | |
| Novalkyd S1105-60X | Novaresine S.r.l | Novalkyd S1105-60X is a short oil alkyd resin featuring fast drying, excellent recoatability, and good pot life. This resin is ideal for use in PU primers and wood topcoats. With melamines, it is also suitable for stoving enamels. | |
| Novalkyd S1107-60X | Novaresine S.r.l | Novalkyd S1107-60X is a drying, short oil alkyd that has been mainly designed for low-temperature, high-quality baking enamels. Together with reactive melamine resins, the cross-linking starts at 80°C for 30 minutes, allowing the alkyd to be suitable for ...weiterlesen Novalkyd S1107-60X is a drying, short oil alkyd that has been mainly designed for low-temperature, high-quality baking enamels. Together with reactive melamine resins, the cross-linking starts at 80°C for 30 minutes, allowing the alkyd to be suitable for enamels in industrial vehicles and for automotive end-line touch-up. The films that results from the process shows good flexibility, hardness and exterior durability. verkürzen | |
| Novalkyd S1110-60X | Novaresine S.r.l | Novalkyd S1110-60X is a non siccative short oil alkyd resin that with the isocyanate can be used to create products that have fast hardness development and quick solvent release properties. The alkyd resin is recommended for use in producing flatting and ...weiterlesen Novalkyd S1110-60X is a non siccative short oil alkyd resin that with the isocyanate can be used to create products that have fast hardness development and quick solvent release properties. The alkyd resin is recommended for use in producing flatting and PU varnishes. verkürzen | |
| Novalkyd S1111-60X | Novaresine S.r.l | Novalkyd S1111-60X is a drying, short oil alkyd that functions as a general purpose resin suitable for fast, air-drying industrial primers and enamels. It can be used alone or blended with other alkyds for polyurethane primers and top coats for wood. Nova...weiterlesen Novalkyd S1111-60X is a drying, short oil alkyd that functions as a general purpose resin suitable for fast, air-drying industrial primers and enamels. It can be used alone or blended with other alkyds for polyurethane primers and top coats for wood. Novalkyd S1111-60X also displays good adhesion and flexibility compared to resins of similar oil length. verkürzen | |
| Novalkyd S1127-60X | Novaresine S.r.l | Novalkyd S1127-60X is a siccative, short oil alkyd resin that is used to produce enamels and industrial primers with fast drying times, fullness and high gloss. It can also be used as a sole binder or together with other alkyds to provide stains and PU to...weiterlesen Novalkyd S1127-60X is a siccative, short oil alkyd resin that is used to produce enamels and industrial primers with fast drying times, fullness and high gloss. It can also be used as a sole binder or together with other alkyds to provide stains and PU top coats for wood surfaces. verkürzen | |
| Novalkyd S1144-60X | Novaresine S.r.l | Novalkyd S1144-60X is a non-drying short oil alkyd resin that in combination with suitable isocyanate adducts, provides a fast release of the solvent, ensuring easy sandability, fast curing and good build are attained. The oil alkyd is mainly designed for...weiterlesen Novalkyd S1144-60X is a non-drying short oil alkyd resin that in combination with suitable isocyanate adducts, provides a fast release of the solvent, ensuring easy sandability, fast curing and good build are attained. The oil alkyd is mainly designed for polyurethane primers and top coats for wood. verkürzen | |
| Novalkyd S1147-50X | Novaresine S.r.l | Novalkyd S1147-50X is a drying-type, phenolic-modified, short oil alkyd resin characterized by good adhesion, fast drying times, and good chemical resistance properties. This product is suitable for fast-drying industrial enamels and top quality anti-corr...weiterlesen Novalkyd S1147-50X is a drying-type, phenolic-modified, short oil alkyd resin characterized by good adhesion, fast drying times, and good chemical resistance properties. This product is suitable for fast-drying industrial enamels and top quality anti-corrosion primers with good adhesion to a variety of substrates. verkürzen | |
| Novalkyd S1157-60XBA | Novaresine S.r.l | Novalkyd S1157-60XBA is a short oil alkyd resin that displays high gloss & fullness, good recoatability & sandability, and rapid hardness. This product is ideal for use in colored matte-finish PU primers showing good overall performance and resistance. | |
| Novalkyd S1159-70X | Novaresine S.r.l | Novalkyd S1159-70X is a non-drying, short oil alkyd that has high reactivity in a hard and flexible resin that has good mar resistance, through cure and compatibility with hydroxy acrylics. It is especially suitable for the formulation of nitrocellulose c...weiterlesen Novalkyd S1159-70X is a non-drying, short oil alkyd that has high reactivity in a hard and flexible resin that has good mar resistance, through cure and compatibility with hydroxy acrylics. It is especially suitable for the formulation of nitrocellulose coatings and enamels for the automotive industry, together with hydroxy acrylics. Novalkyd S1159-70X also has application in PU primers for industrial car body repairs, in high-quality base coats, top coats for wood as well as baking enamels. verkürzen | |
| Novalkyd S1168-60X | Novaresine S.r.l | Novalkyd S1168-60X is a modified short oil alkyd resin that is used in varnishes that are characterized by hardness, fullness and high gloss. Quick siccative properties are shown in PU systems and having a long pot life and high scratch resistance provide...weiterlesen Novalkyd S1168-60X is a modified short oil alkyd resin that is used in varnishes that are characterized by hardness, fullness and high gloss. Quick siccative properties are shown in PU systems and having a long pot life and high scratch resistance provide added features. The alkyd resin is suitable for use in nitro and PU varnishes and acid curing and stoving enamels. verkürzen | |
| Novalkyd S1174-65BA | Novaresine S.r.l | Novalkyd S1174-65BA is a non-drying short oil alkyd that is used whenever hardness, color retention and reactivity are required. Because of its good compatibility with nitrocellulose systems, alkyd resin and isocyanate and due to its reactivity, it is the...weiterlesen Novalkyd S1174-65BA is a non-drying short oil alkyd that is used whenever hardness, color retention and reactivity are required. Because of its good compatibility with nitrocellulose systems, alkyd resin and isocyanate and due to its reactivity, it is the suggested resin for creating stackable matt top coats. verkürzen | |
| Novalkyd S1178-70BA | Novaresine S.r.l | Novalkyd S1178-70BA is a siccative, short oil alkyd resin that is suitable for formulating stains and enamels which show fast siccative times with fast solvent release, high gloss and good aspect, as well as high chemical and mechanical resistance propert...weiterlesen Novalkyd S1178-70BA is a siccative, short oil alkyd resin that is suitable for formulating stains and enamels which show fast siccative times with fast solvent release, high gloss and good aspect, as well as high chemical and mechanical resistance properties. verkürzen | |
| Novalkyd S1180-55T | Novaresine S.r.l | Novalkyd S1180-55T is a drying, short oil alkyd resin that displays fast surface and through drying, hardness, high gloss, chemical resistance and good solvent release. It is suitable for use in the preparation of fast-drying enamels and road marking pain...weiterlesen Novalkyd S1180-55T is a drying, short oil alkyd resin that displays fast surface and through drying, hardness, high gloss, chemical resistance and good solvent release. It is suitable for use in the preparation of fast-drying enamels and road marking paints. verkürzen | |
| Novalkyd S1181-60T | Novaresine S.r.l | Novalkyd S1181-60T is a drying, short oil alkyd resin that displays fast surface and through drying, chemical resistance, hardness, high gloss and good solvent release properties. It is suitable for use together with amino resins for the preparation of fa...weiterlesen Novalkyd S1181-60T is a drying, short oil alkyd resin that displays fast surface and through drying, chemical resistance, hardness, high gloss and good solvent release properties. It is suitable for use together with amino resins for the preparation of fast, air-drying and baking enamels. In combination with chlorinated rubber, Novalkyd S1181-60T is also suitable for traffic paints. verkürzen |
