| ADDITOL® VXW 6396 | Allnex | ADDITOL® VXW 6396 is a flow and leveling agent for waterborne paint systems, without silicone addition. It's a fluorene modified acrylic resin copolymer, neutralized with amine, and improves leveling and substrate wetting. | Request Sample |
| ADDITOL® XL 480 | Allnex | Additol® XL 480 is a leveling agent without addition of silicone, amine resin modified acrylic copolymer. It may be used with any type of paint material, e.g. on the basis of alkyd/melamine systems, acrylics, polyurethane systems, oil-free polyesters, etc...weiterlesen Additol® XL 480 is a leveling agent without addition of silicone, amine resin modified acrylic copolymer. It may be used with any type of paint material, e.g. on the basis of alkyd/melamine systems, acrylics, polyurethane systems, oil-free polyesters, etc. It also prevents surface defects of paint films. verkürzen | Request Sample |
| ADDITOL® XL 490 | Allnex | Additol® XL 490 is a levelling and anticrater agent for enhancing the surface quality of paint film, without silicon addition. | Request Sample |
| ADDITOL® XW 390 | Allnex | Additol® XW 390 is a flow and wetting agent without silicone addition for waterborne coating systems. It prevents flow defects in all waterborne coating systems and promotes substrate wetting. | Request Sample |
| AFCONA - 3277 | AFCONA Additives Sdn Bhd | AFCONA – 3277 is a fluorocarbon modified polymer. This hazy to yellow liquid contains 100% active ingredients and functions as an anti-crater, substrate wetting, and silicone-free leveling agent and foam stabilizer and de-aeration aid. AFCONA – 3277 finds...weiterlesen AFCONA – 3277 is a fluorocarbon modified polymer. This hazy to yellow liquid contains 100% active ingredients and functions as an anti-crater, substrate wetting, and silicone-free leveling agent and foam stabilizer and de-aeration aid. AFCONA – 3277 finds application in solvent-based and high solid systems, and solvent-free systems such as ultraviolet, epoxy, polyurethane, and PMMA flooring. verkürzen | |
| AFCONA - 3570 | AFCONA Additives Sdn Bhd | AFCONA – 3570 is a pre-neutralized fluorocarbon modified polyacrylic in water. This clear to slightly yellow liquid functions as a leveling and anti-crater agent, foam stabilizer, and substrate wetting additive with no intercoat adhesion. AFCONA – 3570 fi...weiterlesen AFCONA – 3570 is a pre-neutralized fluorocarbon modified polyacrylic in water. This clear to slightly yellow liquid functions as a leveling and anti-crater agent, foam stabilizer, and substrate wetting additive with no intercoat adhesion. AFCONA – 3570 finds application in water-based paints and coatings. verkürzen | |
| AFCONA - 3670 | AFCONA Additives Sdn Bhd | AFCONA – 3670 is a fluorocarbon modified polyacrylic. This clear to slightly yellow liquid functions as a leveling, anti-crater, and substrate wetting agent that manages surface control and lowers surface tension. AFCONA – 3670 acts as an anti-foam and de...weiterlesen AFCONA – 3670 is a fluorocarbon modified polyacrylic. This clear to slightly yellow liquid functions as a leveling, anti-crater, and substrate wetting agent that manages surface control and lowers surface tension. AFCONA – 3670 acts as an anti-foam and de-aeration aid, does not interfere with intercoat adhesion, and finds application in solvent-based coatings such as baking paints, polyurethane coatings, epoxies, and printing inks. verkürzen | |
| AFCONA - 3700 | AFCONA Additives Sdn Bhd | AFCONA – 3700 is a polymeric fluorocarbon compound. This clear to slightly yellow liquid functions as a wetting, leveling, and flow control agent with anti-crater properties, low surface tension, and low foam stabilization. AFCONA – 3700 finds application...weiterlesen AFCONA – 3700 is a polymeric fluorocarbon compound. This clear to slightly yellow liquid functions as a wetting, leveling, and flow control agent with anti-crater properties, low surface tension, and low foam stabilization. AFCONA – 3700 finds application in solvent-free and solvent-based coatings, refinish topcoats, stoving enamels based on alkyd, acrylic, and polyester resins, polyurethane coatings, two-pack epoxy compounds, air-drying alkyd systems, and in ultraviolet coatings. verkürzen | |
| AFCONA - 3730 | AFCONA Additives Sdn Bhd | AFCONA – 3730 is a high molecular weight, pure polyester polymer that functions as a compatible thermal-resistant leveling agent that will not provide haze, orange peel, and other side effects. AFCONA – 3730 finds application in coil and can coatings, pol...weiterlesen AFCONA – 3730 is a high molecular weight, pure polyester polymer that functions as a compatible thermal-resistant leveling agent that will not provide haze, orange peel, and other side effects. AFCONA – 3730 finds application in coil and can coatings, polyurethane coatings, baking paints based on alkyd, oil-free polyester and thermosetting acrylic, alkyd-based resins, two-pack epoxy compounds, and thermoplastic acrylics. verkürzen | |
| AFCONA - 3750 | AFCONA Additives Sdn Bhd | AFCONA – 3750 is a polymeric fluorocarbon compound. This clear to slightly yellow liquid is 52% solid and functions as a wetting, leveling, and flow control agent with anti-crater properties, low surface tension, and low foam stabilization. AFCONA – 3750 ...weiterlesen AFCONA – 3750 is a polymeric fluorocarbon compound. This clear to slightly yellow liquid is 52% solid and functions as a wetting, leveling, and flow control agent with anti-crater properties, low surface tension, and low foam stabilization. AFCONA – 3750 can be used at low temperatures, and finds application in organic systems, solvent-based coatings, refinish topcoats, stoving enamels based on alkyd, acrylic, and polyester resins, polyurethane coatings, two-pack epoxy compounds, air-drying alkyd systems, and in ultraviolet coatings. verkürzen | |
| AFCONA - 3755 | AFCONA Additives Sdn Bhd | AFCONA – 3755 is a polyacrylic polymer. This clear to slightly yellow liquid functions as a leveling and flow control agent with anti-foam properties with no influence on overcoat adhesion. AFCONA – 3755 finds application in solvent-based coatings, coil a...weiterlesen AFCONA – 3755 is a polyacrylic polymer. This clear to slightly yellow liquid functions as a leveling and flow control agent with anti-foam properties with no influence on overcoat adhesion. AFCONA – 3755 finds application in solvent-based coatings, coil and can coatings, baking systems, and in matted topcoats and primers for wood coatings. verkürzen | |
| AFCONA - 3758 | AFCONA Additives Sdn Bhd | AFCONA – 3758 is a polyacrylic polymer. This clear to slightly yellow liquid functions as a leveling and flow control agent with anti-crater properties. It reduces surface tension, has minimal foam stabilization effects, and improves substrate wetting pro...weiterlesen AFCONA – 3758 is a polyacrylic polymer. This clear to slightly yellow liquid functions as a leveling and flow control agent with anti-crater properties. It reduces surface tension, has minimal foam stabilization effects, and improves substrate wetting properties, and replaces fluorocarbon in systems. AFCONA – 3758 finds application in solvent-based coatings, organic coating systems, stoving enamels based on alkyd, acrylic, and polyester resins, polyurethane coatings, two-pack epoxy compounds, thermoplastic systems such as NC, TPA, and CAB, and in ultraviolet coatings. verkürzen | |
| AFCONA - 3770 | AFCONA Additives Sdn Bhd | AFCONA – 3770 is a fluorocarbon modified acrylic polymer. This clear to slightly yellow liquid functions as a leveling agent with anti-foam, anti-crater, and de-aeration properties while improving substrate wetting, and without interfering with intercoat ...weiterlesen AFCONA – 3770 is a fluorocarbon modified acrylic polymer. This clear to slightly yellow liquid functions as a leveling agent with anti-foam, anti-crater, and de-aeration properties while improving substrate wetting, and without interfering with intercoat adhesion. AFCONA – 3770 finds application in two-pack polyurethane and epoxy coatings, air-drying alkyd paints, baking enamels such as coil and can coatings, matt finish wood coatings, and in printing inks. verkürzen | |
| AFCONA - 3772 | AFCONA Additives Sdn Bhd | AFCONA – 3772 is a fluorocarbon modified polyacrylate. This clear to slightly yellow liquid functions as a leveling and surface tension reduction agent that increases the polarity of the polymer, making it compatible with common resins used in coatings. I...weiterlesen AFCONA – 3772 is a fluorocarbon modified polyacrylate. This clear to slightly yellow liquid functions as a leveling and surface tension reduction agent that increases the polarity of the polymer, making it compatible with common resins used in coatings. It provides no in-can haziness, anti-flooding and floating properties, prevents craters and orange peel, and helps improve substrate wetting performance. AFCONA – 3772 finds application in aqueous and non-aqueous coatings, solvent-based coatings, high gloss clear coatings, pigmented and matted primers, and in printing inks. verkürzen | |
| AFCONA - 3773 | AFCONA Additives Sdn Bhd | AFCONA – 3773 is a fluorocarbon modified polyacrylate. This clear to slightly yellow liquid is compatible and functions as a high performance leveling and surface tension reduction agent without intercoat adhesion interference. It provides de-aeration and...weiterlesen AFCONA – 3773 is a fluorocarbon modified polyacrylate. This clear to slightly yellow liquid is compatible and functions as a high performance leveling and surface tension reduction agent without intercoat adhesion interference. It provides de-aeration and anti-foam properties, prevents craters and orange peel, and helps improve substrate wetting performance. AFCONA – 3773 finds application in non-aqueous industrial coatings such as baking, polyurethane, and epoxy systems. verkürzen | |
| AFCONA - 3775 | AFCONA Additives Sdn Bhd | AFCONA – 3775 is a special acrylic polymer. This clear to slightly yellow liquid functions as a silicone-free fast leveling and anti-foam agent that improves last stage leveling without intercoat adhesion interference. AFCONA – 3775 is compatible and lowe...weiterlesen AFCONA – 3775 is a special acrylic polymer. This clear to slightly yellow liquid functions as a silicone-free fast leveling and anti-foam agent that improves last stage leveling without intercoat adhesion interference. AFCONA – 3775 is compatible and lowers surface tension, finding application in solvent-based coatings, coil and can coatings, foam sensitive systems, paint systems applied by roller or dipping, two-pack polyurethane and epoxy coatings, baking paints, and matt finished wood coatings. verkürzen | |
| AFCONA - 3777 | AFCONA Additives Sdn Bhd | AFCONA – 3777 is a fluorocarbon modified polymer. This clear to slightly yellow liquid functions as an anti-crater, substrate wetting, and leveling agent without intercoat adhesion interference. AFCONA – 3777 lowers surface tension, features in-can transp...weiterlesen AFCONA – 3777 is a fluorocarbon modified polymer. This clear to slightly yellow liquid functions as an anti-crater, substrate wetting, and leveling agent without intercoat adhesion interference. AFCONA – 3777 lowers surface tension, features in-can transparency, and finds application in solvent-based coatings such as baking paints, polyurethane coatings, and epoxies. verkürzen | |
| AFCONA - 3778 | AFCONA Additives Sdn Bhd | AFCONA – 3778 is a pure polyacrylic polymer. This clear to slightly yellow liquid functions as a leveling ant anti-foam agent with anti-flooding, floating, and de-aeration properties. AFCONA – 3778 provides flow properties and finds application in solvent...weiterlesen AFCONA – 3778 is a pure polyacrylic polymer. This clear to slightly yellow liquid functions as a leveling ant anti-foam agent with anti-flooding, floating, and de-aeration properties. AFCONA – 3778 provides flow properties and finds application in solvent-based coatings such as coil and can coatings, polyurethane coatings, stoving enamels, two-pack epoxy compounds, and in air-drying alkyd systems. verkürzen | |
| AFCONA - 3779 | AFCONA Additives Sdn Bhd | AFCONA – 3779 is a polyacrylic polymer. This clear to slightly yellow liquid functions as a leveling ant anti-foam agent with anti-flooding, floating, and de-aeration properties. AFCONA – 3779 provides flow properties without intercoat adhesion interferen...weiterlesen AFCONA – 3779 is a polyacrylic polymer. This clear to slightly yellow liquid functions as a leveling ant anti-foam agent with anti-flooding, floating, and de-aeration properties. AFCONA – 3779 provides flow properties without intercoat adhesion interference, and finds application in unsaturated polyesters, coil and can coatings, polyurethane coatings, stoving enamels, two-pack epoxy compounds, and in air-drying alkyd systems. verkürzen | |
| ASLA | PCI Group, Inc. | ASLA is a clear, silicone-free, polyvinyl ethyl ether solution used to improve color development, leveling and gloss while controllling surface flooding and floating. It can be used in acrylic resins, alkyds (long, med., short oils), polyamide, polyester ...weiterlesen ASLA is a clear, silicone-free, polyvinyl ethyl ether solution used to improve color development, leveling and gloss while controllling surface flooding and floating. It can be used in acrylic resins, alkyds (long, med., short oils), polyamide, polyester and urethane pigmented and non-pigmented systems. verkürzen | |
| Borchi® Gol E2 | OMG Borchers GmbH | Borchi® Gol E2 is a paint additive for the improvement of flow properties and deaeration of air-drying, stove-drying and catalysed paints. Blistering during preparation and surface defects caused by application are eliminated. This product is silicone-fre...weiterlesen Borchi® Gol E2 is a paint additive for the improvement of flow properties and deaeration of air-drying, stove-drying and catalysed paints. Blistering during preparation and surface defects caused by application are eliminated. This product is silicone-free and can be used in all solvent-containing and solvent-free, single- and multi-component paints. Factors affecting the efficacy of the surface-active substances, besides the type of binder used, are application and mixing conditions. verkürzen | |
| BYK-397 | BYK | BYK-397 is a silicone-and fluorine-free leveling additive for solvent-borne coating systems with excellent defoaming properties. | |
| BYK®-DYNWET 800 | BYK | BYK®-DYNWET 800 is a silicone-free surface additive for aqueous adhesives and sealants. It reduces the dynamic surface tension during fast application processes and thus improves subtrate wetting. | |
| Dynoadd® F-1 | Dynoadd by Dynea | Dynoadd® F-1 is a polymeric, non-silicone general-purpose flow and anti-crater additive for solvent-borne coatings. It lowers surface tension in coating formulations, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are ...weiterlesen Dynoadd® F-1 is a polymeric, non-silicone general-purpose flow and anti-crater additive for solvent-borne coatings. It lowers surface tension in coating formulations, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-1 has limited, but balanced compatibility with most backbone resins, and has defoaming properties in many formulations. Dynoadd® F-1 is an excellent choice in multiple-layer coatings. Dynoadd® F-1 has applications in industrial coatings, coil coatings, automotive OEM, printing inks, and woods coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. verkürzen | Request Sample |
| Dynoadd® F-100 | Dynoadd by Dynea | Dynoadd® F-100 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-100 is more compatible with b...weiterlesen Dynoadd® F-100 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-100 is more compatible with backbone resins than Dynoadd® F-1 and gives improved performance in more polar systems. Dynoadd® F-100 has applications in coil coatings, can coatings, automotive OEM, and printing inks. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, it is more compatible in polar systems than Dynoadd® F-1. It may be used in all layers in multi-layered systems. verkürzen | Request Sample |
| Dynoadd® F-101 | Dynoadd by Dynea | Dynoadd® F-101 is a polymeric, non-silicone flow and levelling agent. It reduces the surface tension in non-solvent and solvent based coating systems, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dyno...weiterlesen Dynoadd® F-101 is a polymeric, non-silicone flow and levelling agent. It reduces the surface tension in non-solvent and solvent based coating systems, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-101 is more polar than Dynoadd® F-100. Dynoadd® F-101 gives improved protection against surface defects in radcure formulations. The higher polarity contributes to good pigment wetting and improved adhesion in some systems. Dynoadd® F-101 has application in coil coatings, automotive OEM, printing ink, and radcure coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, Dynoadd® F-101 is seen to have an extra advantage in polar lacquer systems due to its polar properties. It may be used in all layers in multi-layered systems. verkürzen | Request Sample |
| Dynoadd® F-102 | Dynoadd by Dynea | Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulati...weiterlesen Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulations. Addition of Dynoadd® F-102 will have a positive contribution to substrate wetting. Dynoadd® F-102 can be used in combination with other Dynoadd® products such as Dynoadd® F-1. Dynoadd® F-102 has applications in coil coatings and general industrial. The additive has limited compatibility in many lacquer systems, thus contributing to good defoaming as well as leveling. It may be used in all layers in multi-layered systems. verkürzen | Request Sample |
| Dynoadd® F-106 | Dynoadd by Dynea | Dynoadd® F-106 is a non-silicone, flow and levelling additive for solvent based automotive clear coat formulations. Surface defects such as orange peel, craters and popping are eliminated. Dynoadd® F-106 improves flow and levelling whilst maintaining exce...weiterlesen Dynoadd® F-106 is a non-silicone, flow and levelling additive for solvent based automotive clear coat formulations. Surface defects such as orange peel, craters and popping are eliminated. Dynoadd® F-106 improves flow and levelling whilst maintaining excellent clarity. Dynoadd® F-106 has applications as a automotive OEM clear coat. verkürzen | Request Sample |
| Dynoadd® F-300 | Dynoadd by Dynea | Dynoadd® F-300 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-300 is more compatible with b...weiterlesen Dynoadd® F-300 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-300 is more compatible with backbone resins than Dynoadd® F-3 and gives improved performance in more polar systems. Dynoadd® F-300 has applications in can coatings and coil coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, it is more compatible in polar systems than Dynoadd® F-3. It may be used in all layers in multi-layered systems. verkürzen | Request Sample |
| Dynoadd® F-3B | Dynoadd by Dynea | Dynoadd® F-3Bg is Dynoadd® F-3 dissolved in butyl glycol. Dynoadd® F-3Bg is a polymeric, non-silicone flow and anti-crater additive for solvent-borne coatings. It lowers surface tension, thus improves substrate wetting. Surface defects like craters, cissi...weiterlesen Dynoadd® F-3Bg is Dynoadd® F-3 dissolved in butyl glycol. Dynoadd® F-3Bg is a polymeric, non-silicone flow and anti-crater additive for solvent-borne coatings. It lowers surface tension, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-3Bg has limited, but balanced compatibility with most backbone resins, and has defoaming properties in many formulations. Dynoadd® F-3Bg is an excellent choice in multiple-layer coatings, as it does not interfere with inter-coat adhesion. Dynoadd® F-3B has applications in coil coatings and can coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. verkürzen | Request Sample |
| Dynoadd® F-601 | Dynoadd by Dynea | Dynoadd® F-601 is non-silicone, acrylic modified polyester for water-borne systems. Addition of Dynoadd® F-601 improves substrate wetting and flow and leveling. Dynoadd® F-601 solves problems with craters, pinholes, fish eyes and other surface imperfectio...weiterlesen Dynoadd® F-601 is non-silicone, acrylic modified polyester for water-borne systems. Addition of Dynoadd® F-601 improves substrate wetting and flow and leveling. Dynoadd® F-601 solves problems with craters, pinholes, fish eyes and other surface imperfections. Dynoadd® F-601 has applications in industrial coatings, wood coatings, RadCure, and automotive. The additive may be used in most water-borne coating systems independently of lacquer chemistry if the additive is added prior to dilution with water. It may be used in all layers in multi-layered systems. verkürzen | Request Sample |
| Dynoadd® F-603 | Dynoadd by Dynea | Dynoadd® F-603 is non-silicone, anionic additive for water-borne systems. Dynoadd® F-603 imparts improved substrate wetting, flow and levelling without the formation of foam. Dynoadd® F-603 has applications in industrial coatings, wood coatings, RadCure, ...weiterlesen Dynoadd® F-603 is non-silicone, anionic additive for water-borne systems. Dynoadd® F-603 imparts improved substrate wetting, flow and levelling without the formation of foam. Dynoadd® F-603 has applications in industrial coatings, wood coatings, RadCure, and automotive. The additive may be used in most water-borne coating systems independently of lacquer chemistry. The effect of the additive on the stability of the resin should be controlled as part of the evaluation procedure. It may be used in all layers in multi-layered systems. verkürzen | Request Sample |
| Dynoadd® F-606 | Dynoadd by Dynea | Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to impr...weiterlesen Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to improve pigment wetting. verkürzen | Request Sample |
| Dynoadd® F-608 | Dynoadd by Dynea | Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imper...weiterlesen Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imperfections. The excellent compatibility of the additive with a wide range of resins gives good film clarity in clear coats. Dynoadd® F-608 is compatible with acrylic dispersions, polyurethane dispersions (PUDs), alkyd emulsions, water-reducible alkyds, and polyesters. verkürzen | Request Sample |
| EDAPLAN® LA 451 | Munzing Chemie | EDAPLAN® LA 451 is a yellowish liquid wetting and leveling agent for aqueous systems. EDAPLAN® LA 451 reduces the surface tension of aqueous systems without increasing the foam formation. Thus substrate wetting, leveling and gloss are improved. EDAPLAN® L...weiterlesen EDAPLAN® LA 451 is a yellowish liquid wetting and leveling agent for aqueous systems. EDAPLAN® LA 451 reduces the surface tension of aqueous systems without increasing the foam formation. Thus substrate wetting, leveling and gloss are improved. EDAPLAN® LA 451 is free of silicone and has no adverse effects on recoatability. This additive is compatible with all common resin systems. verkürzen | |
| EDAPLAN® LA 452 | Munzing Chemie | EDAPLAN® LA 452 is a yellow liquid wetting and leveling agent for aqueous systems. EDAPLAN® LA 452 reduces the surface tension of aqueous systems without increasing the foam formation. Thus substrate wetting, leveling and gloss are improved. EDAPLAN® LA ...weiterlesen EDAPLAN® LA 452 is a yellow liquid wetting and leveling agent for aqueous systems. EDAPLAN® LA 452 reduces the surface tension of aqueous systems without increasing the foam formation. Thus substrate wetting, leveling and gloss are improved. EDAPLAN® LA 452 is free of silicone and has no adverse effects on recoatability. This additive is compatible with all common resin systems. Advantages of using EDAPLAN® LA 452 include gloss improvement and reduction of haze, prevention of surface defects like craters and Bénard cells, improvement of substrate wetting, no increase in foam, and good recoatability. Main application areas include architectural coatings, wood and furniture coatings, automotive OEM and repair coatings, industrial coatings, and printing inks and overprint varnishes. verkürzen | |
| MODAFLOW® AQ 3025 | Allnex | Modaflow® AQ 3025 is an acrylic flow additive for aqueous coatings, without silicone addition. It has been developed for use in water-reducible, latex, and dispersion systems and is compatible with a broad range of chemistries. | Request Sample |
| Resiflow FK 70 | Worlée-Chemie G.m.b.H. | Resiflow FK 70 ist ein silikonfreies Anti-Ausschwimm-Mittel auf Basis eines aminoharzmodifizierten Acrylcopolymerisates. Resiflow FK 70 verhindert das Ausschwimmen von Polyester/ Melaminharzlacken mit kritischer Pigmentmischung wie z.B. Titandioxid, Phtha...weiterlesen Resiflow FK 70 ist ein silikonfreies Anti-Ausschwimm-Mittel auf Basis eines aminoharzmodifizierten Acrylcopolymerisates. Resiflow FK 70 verhindert das Ausschwimmen von Polyester/ Melaminharzlacken mit kritischer Pigmentmischung wie z.B. Titandioxid, Phthalocyaninblau und Ruß. Gleichzeitig werden Oberflächenstörungen wie Krater, Nadelstiche und Fischaugen beseitigt, sowie der Verlauf verbessert. verkürzen | |
| Resiflow FL 2 | Worlée-Chemie G.m.b.H. | Resiflow FL 2 ist ein silikonfreies, polymeres Verlaufmittel für lösemittelhaltige und lösemittelfreie Lacksysteme und Druckfarben auf Basis von Epoxy-, Polyester-, Acryl-, Vinyl-, Urethanharzen und anderen Rohstoffen. | |
| Resiflow FL 9 | Worlée-Chemie G.m.b.H. | Resiflow FL 9 ist ein silikonfreies Acryloligomer. Der Zusatz von Resiflow FL 9 verhindert Oberflächenstörungen wie Orangenschaleneffekt, Kraterbildung, Fischaugen, Nadelstiche etc. und verbessert die Verlaufeigenschaften. | |
| Resiflow FM 4 | Worlée-Chemie G.m.b.H. | Resiflow FM 4 ist ein spezielles Acrylpolymer, das als Additiv in lösungsmittelhaltigen Beschichtungsystemen, Druckfarben, High Solids, Coil Coatings und Pulverlacken Einsatz findet. | |
| Resiflow LH 241 | Worlée-Chemie G.m.b.H. | Resiflow LH 241 ist ein silikonfreies Acrylverlaufsmittel. Der Zusatz in entsprechenden Konzentrationen verhindert Lufteinschlüsse, beseitigt Oberflächenstörungen, verbessert Filmeigenschaften ohne die Flexibilität negativ zu beeinflussen und reduziert de...weiterlesen Resiflow LH 241 ist ein silikonfreies Acrylverlaufsmittel. Der Zusatz in entsprechenden Konzentrationen verhindert Lufteinschlüsse, beseitigt Oberflächenstörungen, verbessert Filmeigenschaften ohne die Flexibilität negativ zu beeinflussen und reduziert den Schmutzanfall auf der Oberfläche. Resiflow LH 241 ist funktionell und selbstvernetzend. In ofentrocknenden Systemen kann es während des Einbrennens mit dem Bindemittel reagieren oder mit sich selbst vernetzen. verkürzen | |
| Resiflow LW | Worlée-Chemie G.m.b.H. | Resiflow LW is a silicone free, polymeric flow control agent used in so called high solid coatings, one component as well as two component systems. If applied at an effective concentration it will correct surface imperfections and improve flexibility of c...weiterlesen Resiflow LW is a silicone free, polymeric flow control agent used in so called high solid coatings, one component as well as two component systems. If applied at an effective concentration it will correct surface imperfections and improve flexibility of coatings. Resiflow LW exhibits excellent hydrolytic stability and outdoor durability. It does not yellow or loose its gloss when exposed to UV-radiation. verkürzen | |
| Resiflow PL 200 | Worlée-Chemie G.m.b.H. | Resiflow PL 200 ist ein silikonfreies Acrylatverlaufmittel und hat sich in Epoxy-, Polyester-, Acrylharz-, Hybrid und anderen Pulverlacksystemen bewährt. | |
| Resiflow W 51 | Worlée-Chemie G.m.b.H. | Resiflow W 51 ist ein silikonfreies, polymeres Verlaufmittel. Resiflow W 51 wurde speziell für wässrige Beschichtungen und Druckfarben entwickelt, findet aber auch Verwendung in lösemittelhaltigen Systemen. Hervorzuheben ist die gute Verträglichkeit mit v...weiterlesen Resiflow W 51 ist ein silikonfreies, polymeres Verlaufmittel. Resiflow W 51 wurde speziell für wässrige Beschichtungen und Druckfarben entwickelt, findet aber auch Verwendung in lösemittelhaltigen Systemen. Hervorzuheben ist die gute Verträglichkeit mit verschiedenen verkürzen | |
| Resiflow W 52 | Worlée-Chemie G.m.b.H. | Resiflow W 52 ist ein silikonfreies, polymeres Verlaufmittel. Resiflow W 52 wurde speziell für wässrige Beschichtungen und Druckfarben entwickelt, findet aber auch Verwendung in lösemittelhaltigen Systemen. Hervorzuheben ist die gute Verträglichkeit mit v...weiterlesen Resiflow W 52 ist ein silikonfreies, polymeres Verlaufmittel. Resiflow W 52 wurde speziell für wässrige Beschichtungen und Druckfarben entwickelt, findet aber auch Verwendung in lösemittelhaltigen Systemen. Hervorzuheben ist die gute Verträglichkeit mit verschiedenen Harzen. verkürzen | |
| Resiflow W 5200 | Worlée-Chemie G.m.b.H. | Resiflow W 5200 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This car...weiterlesen Resiflow W 5200 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This carboxylic polymer can be made water soluble by neutralisation with an organic amine or ammonia. Pinholes, craters, pores, fish eyes, roller marks, orange peel effect and other surface imperfections can be eliminated or substantially reduced. verkürzen | |
| WorléeAdd 100 | Worlée-Chemie G.m.b.H. | W´Add 100 ist ein polymeres Verlaufmittel für lösemittelfreie und lösemittelhaltige Lack- und Druckfarben sowie Pulverlacke. | |
| WorléeAdd 101 | Worlée-Chemie G.m.b.H. | W´Add 101 ist ein spezielles, silikonfreies, polymeres Verlaufmittel für lösemittelhaltige und lösemittelfreie Lack- und Druckfarben einschließlich Pulverlacke. Der Zusatz beeinträchtigt in der Regel nicht die Untergrund- und Zwischenschichthaftung. Die s...weiterlesen W´Add 101 ist ein spezielles, silikonfreies, polymeres Verlaufmittel für lösemittelhaltige und lösemittelfreie Lack- und Druckfarben einschließlich Pulverlacke. Der Zusatz beeinträchtigt in der Regel nicht die Untergrund- und Zwischenschichthaftung. Die spezielle chemische Struktur dieses Produktes bewirkt sehr gute Verträglichkeit in Epoxy-, Polyester-, Hybrid-, Acryl-, Vinyl-, Urethanharz- und anderen Bindemittelsystemen. Bei höheren Zusätzen (über 2 %) wirkt W´Add 101 plastifizierend. verkürzen | |
| WorléeAdd 781 | Worlée-Chemie G.m.b.H. | WorléeAdd 781 is a silicone free leveling additive. It may be used in solved based systems such as isocyanate- and amino resin cross linking top coats to improve the levelling. In two-pack-PU-systems the addition of W´Add 781 enables the application of hi...weiterlesen WorléeAdd 781 is a silicone free leveling additive. It may be used in solved based systems such as isocyanate- and amino resin cross linking top coats to improve the levelling. In two-pack-PU-systems the addition of W´Add 781 enables the application of high film thickness with reduced blister building. verkürzen |
