| Domemul AA 9269 | HELIOS RESINS | Domemul AA 9269 is a pure acrylic APEO-free emulsion designed for waterborne road marking coatings. The resin can also be used for fast-drying waterborne coatings, including high humidity and low-temperature environments. | |
| Domopol 6046 100% | HELIOS RESINS | Domopol 6046 100% is a saturated polyester resin developed for 2K polyurethane coatings. This resin can be used as such or combined with hydroxy acrylic resins to increase solids content in industrial finishes, protective coatings, and plastics coatings. | |
| Domopol 6052 80 BAc | HELIOS RESINS | Domopol 6052 80 BAc is a saturated polyester resin developed for 2K polyurethane coatings as a combination resin for hydroxyl acrylic resins to increase solids content, improve flexibility and outdoor durability in industrial finishes, protective coatings...weiterlesen Domopol 6052 80 BAc is a saturated polyester resin developed for 2K polyurethane coatings as a combination resin for hydroxyl acrylic resins to increase solids content, improve flexibility and outdoor durability in industrial finishes, protective coatings, and plastics coatings. verkürzen | |
| Domopur 0215 35 Wa | HELIOS RESINS | Domopur 0215 35 Wa is a self-crosslinking aliphatic polyurethane dispersion suitable for 1K and 2K finishes for parquet, concrete, cork, and PVC flooring. Formulations with the resin provide nonyellowing, high abrasion, chemical, black heel marks, and scr...weiterlesen Domopur 0215 35 Wa is a self-crosslinking aliphatic polyurethane dispersion suitable for 1K and 2K finishes for parquet, concrete, cork, and PVC flooring. Formulations with the resin provide nonyellowing, high abrasion, chemical, black heel marks, and scratch resistance. verkürzen | |
| EBECRYL® 575 | Allnex | EBECRYL® 575 is a chlorine free polyester resin diluted with EBECRYL® 892. It has been specifically designed to provide good adhesion to plastic substrates. Films of EBECRYL®575 cured by ultraviolet light (UV) or electron beam (EB) result in good hardness...weiterlesen EBECRYL® 575 is a chlorine free polyester resin diluted with EBECRYL® 892. It has been specifically designed to provide good adhesion to plastic substrates. Films of EBECRYL®575 cured by ultraviolet light (UV) or electron beam (EB) result in good hardness. verkürzen | Request Sample |
| EBECRYL® 5850 | Allnex | EBECRYL® 5850 is a high performing medium viscosity bio-based diacrylate. When properly formulated, coatings and inks based on EBECRYL®5850 cured by ultraviolet light (UV) or electron beam (EB) energy display high reactivity with good hardness and scratch...weiterlesen EBECRYL® 5850 is a high performing medium viscosity bio-based diacrylate. When properly formulated, coatings and inks based on EBECRYL®5850 cured by ultraviolet light (UV) or electron beam (EB) energy display high reactivity with good hardness and scratch resistance. verkürzen | Request Sample |
| EBECRYL® 600/35 OT | Allnex | EBECRYL® 600-35 OT is the diacrylate ester of bisphenol A epoxy resin diluted with 35% of oligotriacrylate (OTA 480). This resin is characterized by its low odour, light colour, low irritancy and fast cure response. Films of EBECRYL® 600/35OT cured by exp...weiterlesen EBECRYL® 600-35 OT is the diacrylate ester of bisphenol A epoxy resin diluted with 35% of oligotriacrylate (OTA 480). This resin is characterized by its low odour, light colour, low irritancy and fast cure response. Films of EBECRYL® 600/35OT cured by exposure to ultraviolet light (UV) and electron beam (EB) exhibit high surface hardness and gloss, low residual odour and the excellent solvent resistance typical of epoxy resins. verkürzen | Request Sample |
| EBECRYL® 6100 | Allnex | EBECRYL® 6100 is an epoxy dimethacrylate oligomer without monomers or diluting oligomers. EBECRYL® 6100 is recommended for use in applications where high temperature resistance or high hardness are needed. | Request Sample |
| EBECRYL® 611 | Allnex | EBECRYL® 611 is an epoxy dimethacrylate oligomer without monomers or diluting oligomers. EBECRYL® 611 is recommended for use in applications where high temperature resistance or high hardness is needed. | Request Sample |
| EBECRYL® 716 | Allnex | EBECRYL® 716 is a chlorine-free inert binder diluted with TMPTA. It has been specifically designed to provide good adhesion to non-corona treated rigid plastic substrates. | Request Sample |
| RAYLOK™ C1102 | Allnex | RAYLOK™ C1102 is a styrene free urethane acrylate based resin providing high glass transition temperature combined with good flexibility upon curing. This resin is specially developed for making glass fibre composites which are to be cured by Ultraviolet ...weiterlesen RAYLOK™ C1102 is a styrene free urethane acrylate based resin providing high glass transition temperature combined with good flexibility upon curing. This resin is specially developed for making glass fibre composites which are to be cured by Ultraviolet (UV) light. verkürzen | Request Sample |
| UVEKOL® A | Allnex | Uvekol® A is a one-component acrylic resin for the lamination of glass systems. It is cured by UV light for 20 minutes. The Uvekol® A interlayer produces glass laminates with excellent acoustic performance. It can be applied with nearly all kinds of glass...weiterlesen Uvekol® A is a one-component acrylic resin for the lamination of glass systems. It is cured by UV light for 20 minutes. The Uvekol® A interlayer produces glass laminates with excellent acoustic performance. It can be applied with nearly all kinds of glass: flat and slightly bent, tempered, coated, and other types. verkürzen | Request Sample |
| UVEKOL® FR-C | Allnex | Uvekol® FR-C is a mono-component acrylic resin designed for glass lamination especially developed to confer safety impact resistance to fire resistant ceramic glass. The laminates made of this computer are cured under UV light for 20 minutes. The glass la...weiterlesen Uvekol® FR-C is a mono-component acrylic resin designed for glass lamination especially developed to confer safety impact resistance to fire resistant ceramic glass. The laminates made of this computer are cured under UV light for 20 minutes. The glass lamination process using Uvekol® FR-C is simple and does not require heating or pressure. verkürzen | Request Sample |
| UVEKOL® S | Allnex | UVEKOL® S is a one-component acrylic resin for the lamination of glass systems. It is cured under UV light for 20 minutes. The UVEKOL® S interlayer produces glass laminates with excellent impact resistance. It can be applied with nearly all kinds of glass...weiterlesen UVEKOL® S is a one-component acrylic resin for the lamination of glass systems. It is cured under UV light for 20 minutes. The UVEKOL® S interlayer produces glass laminates with excellent impact resistance. It can be applied with nearly all kinds of glass: flat and bent, tempered, coated and other types of glass. verkürzen | Request Sample |
| UVEKOL® S 15 | Allnex | Uvekol® S 15 is a one-component acrylic resin for the lamination of glass systems. It is cured under UV light for 20 minutes. The Uvekol® S 15 interlayer produces glass laminates with excellent impact resistance. It can be applied with nearly all kinds of...weiterlesen Uvekol® S 15 is a one-component acrylic resin for the lamination of glass systems. It is cured under UV light for 20 minutes. The Uvekol® S 15 interlayer produces glass laminates with excellent impact resistance. It can be applied with nearly all kinds of glass: flat and bent, tempered, coated, and other types of glass. verkürzen | Request Sample |
