| EBECRYL® 575 | Allnex | EBECRYL® 575 is a chlorine free polyester resin diluted with EBECRYL® 892. It has been specifically designed to provide good adhesion to plastic substrates. Films of EBECRYL®575 cured by ultraviolet light (UV) or electron beam (EB) result in good hardness...weiterlesen EBECRYL® 575 is a chlorine free polyester resin diluted with EBECRYL® 892. It has been specifically designed to provide good adhesion to plastic substrates. Films of EBECRYL®575 cured by ultraviolet light (UV) or electron beam (EB) result in good hardness. verkürzen | Request Sample |
| EBECRYL® 5850 | Allnex | EBECRYL® 5850 is a high performing medium viscosity bio-based diacrylate. When properly formulated, coatings and inks based on EBECRYL®5850 cured by ultraviolet light (UV) or electron beam (EB) energy display high reactivity with good hardness and scratch...weiterlesen EBECRYL® 5850 is a high performing medium viscosity bio-based diacrylate. When properly formulated, coatings and inks based on EBECRYL®5850 cured by ultraviolet light (UV) or electron beam (EB) energy display high reactivity with good hardness and scratch resistance. verkürzen | Request Sample |
| EBECRYL® 600/35 OT | Allnex | EBECRYL® 600-35 OT is the diacrylate ester of bisphenol A epoxy resin diluted with 35% of oligotriacrylate (OTA 480). This resin is characterized by its low odour, light colour, low irritancy and fast cure response. Films of EBECRYL® 600/35OT cured by exp...weiterlesen EBECRYL® 600-35 OT is the diacrylate ester of bisphenol A epoxy resin diluted with 35% of oligotriacrylate (OTA 480). This resin is characterized by its low odour, light colour, low irritancy and fast cure response. Films of EBECRYL® 600/35OT cured by exposure to ultraviolet light (UV) and electron beam (EB) exhibit high surface hardness and gloss, low residual odour and the excellent solvent resistance typical of epoxy resins. verkürzen | Request Sample |
| EBECRYL® 6100 | Allnex | EBECRYL® 6100 is an epoxy dimethacrylate oligomer without monomers or diluting oligomers. EBECRYL® 6100 is recommended for use in applications where high temperature resistance or high hardness are needed. | Request Sample |
| EBECRYL® 611 | Allnex | EBECRYL® 611 is an epoxy dimethacrylate oligomer without monomers or diluting oligomers. EBECRYL® 611 is recommended for use in applications where high temperature resistance or high hardness is needed. | Request Sample |
| EBECRYL® 716 | Allnex | EBECRYL® 716 is a chlorine-free inert binder diluted with TMPTA. It has been specifically designed to provide good adhesion to non-corona treated rigid plastic substrates. | Request Sample |
| Novalkyd L1033-70WS | Novaresine S.r.l | Novalkyd L1033-70WS is a siccative long oil alkyd resin that provides excellent gloss retention, as well as good flow and corrosion resistance properties. This product is mainly designed for full-tone brusing enamels; it can also be used in flatting varni...weiterlesen Novalkyd L1033-70WS is a siccative long oil alkyd resin that provides excellent gloss retention, as well as good flow and corrosion resistance properties. This product is mainly designed for full-tone brusing enamels; it can also be used in flatting varnishes and metal putties. verkürzen | |
| Novalkyd L2007-100SF | Novaresine S.r.l | Novalkyd L2007-100SF is a long oil alkyd resin that is recommended for the production of paints that show good brushing, high build and yellowing characteristics. Films are marked by good adhesion and flexibility, as well as good weathering. The resin is ...weiterlesen Novalkyd L2007-100SF is a long oil alkyd resin that is recommended for the production of paints that show good brushing, high build and yellowing characteristics. Films are marked by good adhesion and flexibility, as well as good weathering. The resin is suitable for low yellowing decorative enamels in interior and exterior applications and for wood stains. It is also suitable for printing inks. verkürzen | |
| Novalkyd L2008-100SF | Novaresine S.r.l | Novalkyd L2008-100SF is a long oil high solid alkyd resin that shows good drying properties in enamels, as well as yellowing resistance and color retention properties. The resin also has good wettability to ensure general compatibility with all kinds of p...weiterlesen Novalkyd L2008-100SF is a long oil high solid alkyd resin that shows good drying properties in enamels, as well as yellowing resistance and color retention properties. The resin also has good wettability to ensure general compatibility with all kinds of pigments. It also has uses in inks. verkürzen | |
| Novalkyd L2020-98SF | Novaresine S.r.l | Novalkyd L2020-98SF is a drying long oil alkyd resin that provides good flow, build and brushability in brushing enamels. Because of its good wetting properties, the resin is used in pigment pastes, architectural paints and printing inks. | |
| Novalkyd M2026-75LA | Novaresine S.r.l | Novalkyd M2026-75LA is a medium oil, non-drying alkyd that is suitable for use in printing inks, showing good lightfastness in combination with benzoguanamine resins. | |
| Novalkyd S1022-60X | Novaresine S.r.l | Novalkyd S1022-60X is a short oil, non-drying alkyd that has a high color retention, making it suitable for all types of white non-yellowing enamels. These would include baked enamels for metal furniture, along with household appliances and industrial fin...weiterlesen Novalkyd S1022-60X is a short oil, non-drying alkyd that has a high color retention, making it suitable for all types of white non-yellowing enamels. These would include baked enamels for metal furniture, along with household appliances and industrial finishes. When combined with nitrocellulose, it exhibits non-yellowing features, along with high gloss in flexible lacquers and enamels. verkürzen | |
| Novalkyd S1023-50S100 | Novaresine S.r.l | Novalkyd S1023-50S100 is a short oil, non-drying alkyd that has a high color retention, making it ideal for all kinds of white, non-yellowing enamels. It is recommended in baking enamels for metal furniture, household appliances and general industrial fin...weiterlesen Novalkyd S1023-50S100 is a short oil, non-drying alkyd that has a high color retention, making it ideal for all kinds of white, non-yellowing enamels. It is recommended in baking enamels for metal furniture, household appliances and general industrial finishes. When combined with nitrocellulose, it provides high gloss and non-yellowing features. verkürzen | |
| Novapol U7101-70 | Novaresine S.r.l | Novapol U7101-70 is an unsaturated polyester resin that is catalyzed with amines to improve reactivity with peroxide. It is suitable to formulate mastics and filler for marble and car refinishing as well as abrasive mixtures. Products that are formulated ...weiterlesen Novapol U7101-70 is an unsaturated polyester resin that is catalyzed with amines to improve reactivity with peroxide. It is suitable to formulate mastics and filler for marble and car refinishing as well as abrasive mixtures. Products that are formulated with the resin are marked by high reactivity at lower temperatures and high compatibility with all marble surfaces. verkürzen | |
| Novapol U7102-70 | Novaresine S.r.l | Novapol U7102-70 is an orthophthalic polyester resin that displays low reactivity and excellent adhesion. This product is ideal for use in formulating thixotropic putties. | |
| Novapol U7105-68 | Novaresine S.r.l | Novapol U7105-68 is an orthophthalic polyester resin that displays excellent fluidity and good surface penetration. This product is designed for use in bonding adhesives and repair coatings. | |
| Novapol U7108-61 | Novaresine S.r.l | Novapol U7108-61 is a very clear, orthophthalic polyester resin with high adhesion and low viscosity. This product is ideal for use in bonding adhesives and mastics. | |
| Novapol U7120-68 | Novaresine S.r.l | Novapol U7120-68 is an amine-accelerated, orthophthalic polyester resin that provides good general properties in putties, including high adhesion and reactivity. This product is designed for use in mastics. | |
| Novapol U7130-73 | Novaresine S.r.l | Novapol U7130-73 is a medium viscosity, polyester resin in DCPD, designed for use in putties, especially those blended with vinylester resins or abrasives. | |
| Novapol U7131-73 | Novaresine S.r.l | Novapol U7131-73 is a DCPD-based polyester resin developed for use in putties, mastics, and stucco coating applications. | |
| Novapol U7204-57 | Novaresine S.r.l | Novapol U7204-57 is a clear, orthophthalic polyester resin, with low shrinkage, designed for bonding adhesives, polishes, reinforcing coatings, and sealants. It is not recommended for putties. | |
| Novapol U7206-73 | Novaresine S.r.l | Novapol U7206-73 is a rich, high-viscosity polyester resin designed for use in high quality clear putties. | |
| Novapol U7208-63 | Novaresine S.r.l | Novapol U7208-63 is an unsaturated polyester resin that provides reduced viscosity and shrinkage, as well as deep penetration of porous surfaces. This product is ideal for use in marble applications, including polishes, reinforcing coatings, and sealants. | |
| Novapol U7216-60 | Novaresine S.r.l | Novapol U7216-60 is an orthophthalic resin, accelerated with cobalt and featuring low reactivity to allow for easy usage during the hardening stage. This product is ideal for use in clear fillers and putties. | |
| Novapol U7217-61 | Novaresine S.r.l | Novapol U7217-61 is a high reactivity orthophthalic resin optimized for treatments applied to porous surfaces. This product is ideal for use in polish and sealant applications. | |
| Novapol U7227-61 | Novaresine S.r.l | Novapol U7227-61 is a transparent orthophthalic resin that provides low volume shrinkage and high reactivity. Optimized for treatments applied to porous surfaces - especially crystalline marbles - this product is ideal for use in polish and sealant applic...weiterlesen Novapol U7227-61 is a transparent orthophthalic resin that provides low volume shrinkage and high reactivity. Optimized for treatments applied to porous surfaces - especially crystalline marbles - this product is ideal for use in polish and sealant applications. verkürzen | |
| Novapol U7230-67 | Novaresine S.r.l | Novapol U7230-67 is an orthophthalic wax resin, accelerated with cobalt. This product is ideal for use in the formulation of high performance clear putties. | |
| Novapol U7240-57 | Novaresine S.r.l | Novapol U7240-57 is an orthophthalic resin designed for use in bonding adhesives, sealants, polishes, and reinforcement coatings. It is not recommended for putties. | |
| Novapol U7303-55 | Novaresine S.r.l | Novapol U7303-55 is an unsaturated orthophthalic resin, accelerated with cobalt. It provides good mechanical resistance, low volume loss, and rapid reactivity - especially with peroxide. This product is ideal for use in mastics for marble applications. | |
| Novapol U7305-68 | Novaresine S.r.l | Novapol U7305-68 is an accelerated orthophthalic resin featuring low shrinkage. This product is ideal for use in clear brushable coatings and mastics. | |
| Novapol U7307-68 | Novaresine S.r.l | Novapol U7307-68 is a low viscosity orthophthalic resin that delivers excellent adhesion, high reactivity even at low temperatures, and good hardness development. This product is ideal for use in polishes and reinforcing mastics. | |
| Novasynt S1305-60 | Novaresine S.r.l | Novasynt S1305-60 is a saturated polyester resin designed for the preparation of sterilizable can-coating lacquers and enamels. This product is also suitable for wet-on-wet ink applications. | |
| Novester 8511-73ST | Novaresine S.r.l | Novester 8511-73ST is an elastic unsaturated polyester resin designed primarily for use in wood primers and putties. This product is also recommended for UV-curable and powder coating applications. | |
| RAYLOK™ C1102 | Allnex | RAYLOK™ C1102 is a styrene free urethane acrylate based resin providing high glass transition temperature combined with good flexibility upon curing. This resin is specially developed for making glass fibre composites which are to be cured by Ultraviolet ...weiterlesen RAYLOK™ C1102 is a styrene free urethane acrylate based resin providing high glass transition temperature combined with good flexibility upon curing. This resin is specially developed for making glass fibre composites which are to be cured by Ultraviolet (UV) light. verkürzen | Request Sample |
| UVEKOL® A | Allnex | Uvekol® A is a one-component acrylic resin for the lamination of glass systems. It is cured by UV light for 20 minutes. The Uvekol® A interlayer produces glass laminates with excellent acoustic performance. It can be applied with nearly all kinds of glass...weiterlesen Uvekol® A is a one-component acrylic resin for the lamination of glass systems. It is cured by UV light for 20 minutes. The Uvekol® A interlayer produces glass laminates with excellent acoustic performance. It can be applied with nearly all kinds of glass: flat and slightly bent, tempered, coated, and other types. verkürzen | Request Sample |
| UVEKOL® FR-C | Allnex | Uvekol® FR-C is a mono-component acrylic resin designed for glass lamination especially developed to confer safety impact resistance to fire resistant ceramic glass. The laminates made of this computer are cured under UV light for 20 minutes. The glass la...weiterlesen Uvekol® FR-C is a mono-component acrylic resin designed for glass lamination especially developed to confer safety impact resistance to fire resistant ceramic glass. The laminates made of this computer are cured under UV light for 20 minutes. The glass lamination process using Uvekol® FR-C is simple and does not require heating or pressure. verkürzen | Request Sample |
| UVEKOL® S | Allnex | UVEKOL® S is a one-component acrylic resin for the lamination of glass systems. It is cured under UV light for 20 minutes. The UVEKOL® S interlayer produces glass laminates with excellent impact resistance. It can be applied with nearly all kinds of glass...weiterlesen UVEKOL® S is a one-component acrylic resin for the lamination of glass systems. It is cured under UV light for 20 minutes. The UVEKOL® S interlayer produces glass laminates with excellent impact resistance. It can be applied with nearly all kinds of glass: flat and bent, tempered, coated and other types of glass. verkürzen | Request Sample |
| UVEKOL® S 15 | Allnex | Uvekol® S 15 is a one-component acrylic resin for the lamination of glass systems. It is cured under UV light for 20 minutes. The Uvekol® S 15 interlayer produces glass laminates with excellent impact resistance. It can be applied with nearly all kinds of...weiterlesen Uvekol® S 15 is a one-component acrylic resin for the lamination of glass systems. It is cured under UV light for 20 minutes. The Uvekol® S 15 interlayer produces glass laminates with excellent impact resistance. It can be applied with nearly all kinds of glass: flat and bent, tempered, coated, and other types of glass. verkürzen | Request Sample |
