| DAPRO® DF 696 | Elementis | DAPRO® DF 696 is a highly efficient grind defoamer composed of foam destroying particles, modified silicone and polypropylene glycol. It is specially developed for optimum foam control in grinding process of pigments and fillers dispersions. DAPRO® DF 696...weiterlesen DAPRO® DF 696 is a highly efficient grind defoamer composed of foam destroying particles, modified silicone and polypropylene glycol. It is specially developed for optimum foam control in grinding process of pigments and fillers dispersions. DAPRO® DF 696 works effectively in various water- based inks and coatings applications. It is easy to incorporate and disperses well into a wide range of formulations with excellent performance. verkürzen | Request Sample |
| EBECRYL® 575 | Allnex | EBECRYL® 575 is a chlorine free polyester resin diluted with EBECRYL® 892. It has been specifically designed to provide good adhesion to plastic substrates. Films of EBECRYL®575 cured by ultraviolet light (UV) or electron beam (EB) result in good hardness...weiterlesen EBECRYL® 575 is a chlorine free polyester resin diluted with EBECRYL® 892. It has been specifically designed to provide good adhesion to plastic substrates. Films of EBECRYL®575 cured by ultraviolet light (UV) or electron beam (EB) result in good hardness. verkürzen | Request Sample |
| EBECRYL® 5850 | Allnex | EBECRYL® 5850 is a high performing medium viscosity bio-based diacrylate. When properly formulated, coatings and inks based on EBECRYL®5850 cured by ultraviolet light (UV) or electron beam (EB) energy display high reactivity with good hardness and scratch...weiterlesen EBECRYL® 5850 is a high performing medium viscosity bio-based diacrylate. When properly formulated, coatings and inks based on EBECRYL®5850 cured by ultraviolet light (UV) or electron beam (EB) energy display high reactivity with good hardness and scratch resistance. verkürzen | Request Sample |
| EBECRYL® 600/35 OT | Allnex | EBECRYL® 600-35 OT is the diacrylate ester of bisphenol A epoxy resin diluted with 35% of oligotriacrylate (OTA 480). This resin is characterized by its low odour, light colour, low irritancy and fast cure response. Films of EBECRYL® 600/35OT cured by exp...weiterlesen EBECRYL® 600-35 OT is the diacrylate ester of bisphenol A epoxy resin diluted with 35% of oligotriacrylate (OTA 480). This resin is characterized by its low odour, light colour, low irritancy and fast cure response. Films of EBECRYL® 600/35OT cured by exposure to ultraviolet light (UV) and electron beam (EB) exhibit high surface hardness and gloss, low residual odour and the excellent solvent resistance typical of epoxy resins. verkürzen | Request Sample |
| EBECRYL® 6100 | Allnex | EBECRYL® 6100 is an epoxy dimethacrylate oligomer without monomers or diluting oligomers. EBECRYL® 6100 is recommended for use in applications where high temperature resistance or high hardness are needed. | Request Sample |
| EBECRYL® 611 | Allnex | EBECRYL® 611 is an epoxy dimethacrylate oligomer without monomers or diluting oligomers. EBECRYL® 611 is recommended for use in applications where high temperature resistance or high hardness is needed. | Request Sample |
| EBECRYL® 716 | Allnex | EBECRYL® 716 is a chlorine-free inert binder diluted with TMPTA. It has been specifically designed to provide good adhesion to non-corona treated rigid plastic substrates. | Request Sample |
| Finntalc M15LV | Elementis | Finntalc M15LV is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural produc...weiterlesen Finntalc M15LV is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. It is ideal for use in general purpose high solids, low VOC architectural and industrial coatings with dry film thickness of 50-60 μm. verkürzen | Request Sample |
| Finntalc M20L | Elementis | Finntalc M20L is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product ...weiterlesen Finntalc M20L is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. It is ideal for use in general purpose architectural paints, industrial top coats and tintable primers. verkürzen | Request Sample |
| Finntalc M30LV | Elementis | Finntalc M30LV is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product...weiterlesen Finntalc M30LV is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. It is ideal for use in high solids general purpose industrial coatings with dry film thickness of 80 - 100 μm, car repair putties. verkürzen | Request Sample |
| Finntalc M40 | Elementis | Finntalc M40 is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product s...weiterlesen Finntalc M40 is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. It is ideal for use in paint and coatings, adhesives, and sealants. verkürzen | Request Sample |
| Finntalc M40LV | Elementis | Finntalc M40LV s a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product ...weiterlesen Finntalc M40LV s a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. It is ideal for use in paint & coatings applications. verkürzen | Request Sample |
| Finntalc M40SL | Elementis | Finntalc M40SL is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product...weiterlesen Finntalc M40SL is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. It is ideal for use in paint & coatings applications. verkürzen | Request Sample |
| RAYLOK™ C1102 | Allnex | RAYLOK™ C1102 is a styrene free urethane acrylate based resin providing high glass transition temperature combined with good flexibility upon curing. This resin is specially developed for making glass fibre composites which are to be cured by Ultraviolet ...weiterlesen RAYLOK™ C1102 is a styrene free urethane acrylate based resin providing high glass transition temperature combined with good flexibility upon curing. This resin is specially developed for making glass fibre composites which are to be cured by Ultraviolet (UV) light. verkürzen | Request Sample |
| UVEKOL® A | Allnex | Uvekol® A is a one-component acrylic resin for the lamination of glass systems. It is cured by UV light for 20 minutes. The Uvekol® A interlayer produces glass laminates with excellent acoustic performance. It can be applied with nearly all kinds of glass...weiterlesen Uvekol® A is a one-component acrylic resin for the lamination of glass systems. It is cured by UV light for 20 minutes. The Uvekol® A interlayer produces glass laminates with excellent acoustic performance. It can be applied with nearly all kinds of glass: flat and slightly bent, tempered, coated, and other types. verkürzen | Request Sample |
| UVEKOL® FR-C | Allnex | Uvekol® FR-C is a mono-component acrylic resin designed for glass lamination especially developed to confer safety impact resistance to fire resistant ceramic glass. The laminates made of this computer are cured under UV light for 20 minutes. The glass la...weiterlesen Uvekol® FR-C is a mono-component acrylic resin designed for glass lamination especially developed to confer safety impact resistance to fire resistant ceramic glass. The laminates made of this computer are cured under UV light for 20 minutes. The glass lamination process using Uvekol® FR-C is simple and does not require heating or pressure. verkürzen | Request Sample |
| UVEKOL® S | Allnex | UVEKOL® S is a one-component acrylic resin for the lamination of glass systems. It is cured under UV light for 20 minutes. The UVEKOL® S interlayer produces glass laminates with excellent impact resistance. It can be applied with nearly all kinds of glass...weiterlesen UVEKOL® S is a one-component acrylic resin for the lamination of glass systems. It is cured under UV light for 20 minutes. The UVEKOL® S interlayer produces glass laminates with excellent impact resistance. It can be applied with nearly all kinds of glass: flat and bent, tempered, coated and other types of glass. verkürzen | Request Sample |
| UVEKOL® S 15 | Allnex | Uvekol® S 15 is a one-component acrylic resin for the lamination of glass systems. It is cured under UV light for 20 minutes. The Uvekol® S 15 interlayer produces glass laminates with excellent impact resistance. It can be applied with nearly all kinds of...weiterlesen Uvekol® S 15 is a one-component acrylic resin for the lamination of glass systems. It is cured under UV light for 20 minutes. The Uvekol® S 15 interlayer produces glass laminates with excellent impact resistance. It can be applied with nearly all kinds of glass: flat and bent, tempered, coated, and other types of glass. verkürzen | Request Sample |
