| Agrocer® Blue 153 Disp. | Clariant Plastics and Coatings (Dispersions) | Agrocer® Blue 153 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning o...weiterlesen Agrocer® Blue 153 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of production equipment. Due to its composition, Agrocer® Blue 153 disp. is highly compatible with common seed treatment pesticide formulations as well as seed coating products. All Agrocer® dispersions are manufactured without using alkyl phenol ethoxylate (APEO) and do not require any hazardous labeling. verkürzen | Request Sample |
| Agrocer® Green 007 Disp. | Clariant Plastics and Coatings (Dispersions) | Agrocer® Green 007 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning ...weiterlesen Agrocer® Green 007 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of production equipment. Due to its composition, Agrocer® Green 007 disp. is highly compatible with common seed treatment pesticide formulations as well as seed coating products. All Agrocer® dispersions are manufactured without using alkyl phenol ethoxylate (APEO) and do not require any hazardous labeling. verkürzen | Request Sample |
| Agrocer® Red 112 Disp. | Clariant Plastics and Coatings (Dispersions) | Agrocer® Red 112 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of...weiterlesen Agrocer® Red 112 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of production equipment. Due to its composition, Agrocer® Red 112 disp. is highly compatible with common seed treatment pesticide formulations as well as seed coating products. In comparison to Pigment Red 48:2, Agrocer® Red 112 disp. exhibits superior compatibility in pesticide formulations and seed coatings. All Agrocer® dispersions are manufactured without using alkyl phenol ethoxylate (APEO) and do not require any hazardous labeling. verkürzen | Request Sample |
| Agrocer® Red 482 Disp. | Clariant Plastics and Coatings (Dispersions) | Agrocer® Red 482 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of...weiterlesen Agrocer® Red 482 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of production equipment. Due to its composition, Agrocer® Red 482 disp. is highly compatible with common seed treatment pesticide formulations as well as seed coating products. All Agrocer® dispersions are manufactured without using alkyl phenol ethoxylate (APEO) and do not require any hazardous labeling. verkürzen | Request Sample |
| Agrocer® Violet 023 Disp. | Clariant Plastics and Coatings (Dispersions) | Agrocer® Violet 023 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning...weiterlesen Agrocer® Violet 023 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of production equipment. Due to its composition, Agrocer® Violet 023 disp. is highly compatible with common seed treatment pesticide formulations as well as seed coating products. Agrocer® Violet 023 disp. gives very attractive color shades and seeds a high-quality appearance. All Agrocer dispersions are manufactured without using alkyl phenol ethoxylate (APEO) and do not require any hazardous labeling. verkürzen | Request Sample |
| Aquanyl Blue AN 500 - Pigment Blue 15:0 | Clariant Plastics and Coatings (Dispersions) | Aquanyl Blue AN 500 is a water-based dispersion of Pigment Blue 15:0. It is binder-free, solvent-free and based on nonionic and / or anionic wetting and dispersing agents. Recommended for water-based paints and coatings. | Request Sample |
| Aquanyl® Red D3GD 500 - Pigment Red 254 | Clariant Plastics and Coatings (Dispersions) | Aquanyl® Red D3GD 500 is an aqueous pigment dispersion recommended for water-based coatings and paints. | Request Sample |
| Aquanyl Yellow YT 100 - Pigment Yellow 65 | Clariant Plastics and Coatings (Dispersions) | Aquanyl Yellow YT 100 is an aqueous pigment dispersion recommended for water-based coatings. | Request Sample |
| CALGON® 322 | ICL Phosphate Specialty | CALGON® 322 is a dispersing agent for emulsion paints, plasters and adhesives. It is a slightly acidic sodium polyphosphate of long chain length. This white, hygroscopic powder improves the storage stability when applied in combination with Polyacrylates ...weiterlesen CALGON® 322 is a dispersing agent for emulsion paints, plasters and adhesives. It is a slightly acidic sodium polyphosphate of long chain length. This white, hygroscopic powder improves the storage stability when applied in combination with Polyacrylates like LOPON® 890. Due to its dispersing action, optimal particle size ist rapidly achieved. This is beneficial in the production process of manufacturing paints. This product is best suitable as a dispersing agent for all aqueous building paints, especially emulsion paints consisting of usual resins. CALGON® 322 slows down sedimentation, stabilizes water hardness and offers a good binding capacity with regard to calcium and heavy metal ions. It also prevents coagulation and brown shadings of emulsion paints and deflocculates pigments and fillers in aqueous suspensions. Thereby, high solid contents of emulsion paints with low viscosity can be achived. verkürzen | Request Sample |
| CALGON® 322 New | ICL Phosphate Specialty | CALGON® 322 New is a dispersing agent for emulsion paints, plasters, and adhesives. It is a slightly acidic sodium polyphosphate of long chain length. This product improves the storage stability when applied in combination with polyacrylates like LOPON® 8...weiterlesen CALGON® 322 New is a dispersing agent for emulsion paints, plasters, and adhesives. It is a slightly acidic sodium polyphosphate of long chain length. This product improves the storage stability when applied in combination with polyacrylates like LOPON® 890. Due to its dispersing action, optimal particle size is rapidly achieved and it is best suited as a dispersing agent for waterborne paints, especially emulsion paints. It also slows down sedimentation reduces water hardness and offers a good binding capacity with regard to calcium- and heavy metal ions. This product deflocculates pigments and fillers in aqueous suspensions. Thereby, high solid contents of emulsion paints with low viscosity can be achieved. verkürzen | Request Sample |
| CALGON® N | ICL Phosphate Specialty | CALGON® N is a dispersing agent for emulsion paints, plasters and adhesives. This white powder is a slightly alkaline sodium polyphosphate of medium chain length. It improves the storage stability when applied in combination with polyacrylates like LOPON®...weiterlesen CALGON® N is a dispersing agent for emulsion paints, plasters and adhesives. This white powder is a slightly alkaline sodium polyphosphate of medium chain length. It improves the storage stability when applied in combination with polyacrylates like LOPON® 890, and due to its high dispersing effectivity, optimal particle size is rapidly achieved. This product is suitable as a dispersing agent for waterborne paints, slows down sedimentation, reduces water hardness and offers a good binding capacity with regard to calcium and heavy metal ions. It deflocculates pigments and fillers in aqueous suspensions. Thereby, high solid contents of emulsion paints with low viscosity can be achieved. verkürzen | Request Sample |
| CALGON® N New | ICL Phosphate Specialty | CALGON® N New is a dispersing agent for emulsion paints, plasters and adhesives. It is a slightly alkaline sodium polyphosphate of medium chain length. CALGON® N new is easily soluble since the product is agglomerated, it improves the storage stability wh...weiterlesen CALGON® N New is a dispersing agent for emulsion paints, plasters and adhesives. It is a slightly alkaline sodium polyphosphate of medium chain length. CALGON® N new is easily soluble since the product is agglomerated, it improves the storage stability when applied in combination with polyacrylates like LOPON® 800, and due to its high dispersing effectivity, optimal particle size of the pigment slurry is rapidly achieved. This product is suitable as a dispersing agent for emulsion paints and plasters, slows down sedimentation, reduces water hardness and offers a good binding capacity with regard to calcium and heavy metal ions. It deflocculates pigments and fillers in aqueous suspensions to achieve high solid contents of emulsion paints with low viscosity. verkürzen | Request Sample |
| CALGON® TK | ICL Phosphate Specialty | CALGON® TK is a dispersing agent for emulsion paints, plasters and adhesives. It is a white, hygroscopic granulate. This product offers the following advantages: low and rapid end viscosity of dispersing process, is best suitable as dispersing agent for a...weiterlesen CALGON® TK is a dispersing agent for emulsion paints, plasters and adhesives. It is a white, hygroscopic granulate. This product offers the following advantages: low and rapid end viscosity of dispersing process, is best suitable as dispersing agent for all aqueous building paints and plasters, caused by the excellent storage stability CALGON® TK is best suitable for the application within silicate paints. It prevents white shadings and carbonatisation of external wall paints, and it can be applied in combination with polyacrylates like LOPON® 890. verkürzen | Request Sample |
| Colanyl Black N 131 - MX - Pigment Black 7 | Clariant Plastics and Coatings (Dispersions) | Colanyl Black N 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the ...weiterlesen Colanyl Black N 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the excellent weathering fastness, it is suitable for interior and exterior use. verkürzen | Request Sample |
| Colanyl Black N 500 - Pigment Black 7 | Clariant Plastics and Coatings (Dispersions) | Colanyl Black N 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* The main app...weiterlesen Colanyl Black N 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* The main application fields of Colanyl Black N 500 are new generation of dispersion paints and renderings/plaster based on aqueous polymer dispersions. Colanyl Black N 500 is also compatible with some other binder systems, e.g. water-based industrial paints, but the maximum dosage level and compatibility of Colanyl Black N 500 has to be checked in the customer paint system itself. verkürzen | Request Sample |
| Colanyl Blue A2R 131 - Pigment Blue 15:1 | Clariant Plastics and Coatings (Dispersions) | Colanyl Blue A2R 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of its...weiterlesen Colanyl Blue A2R 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of its good durability, it can be used for interior and exterior use after adequate weathering tests. verkürzen | Request Sample |
| Colanyl Blue A2R 500 - Pigment Blue 15:1 | Clariant Plastics and Coatings (Dispersions) | Colanyl Blue A2R 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* The main ap...weiterlesen Colanyl Blue A2R 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* The main application fields of Colanyl Blue A2R 500 are new generation of dispersion paints and renderings/plaster based on aqueous polymer dispersions. Colanyl Blue A2R 500 is also compatible with some other binder systems, e.g. water-based industrial paints, but the maximum dosage level and compatibility of Colanyl Blue A2R 500 has to be checked in the customer paint system itself. By using Colanyl Blue A2R 500 in automatic and manual dispensers, excellent accuracy and reliability when poured or pumped have been observed. Furthermore, Colanyl Blue A2R 500 is miscible in all proportions with other Colanyl 500 preparations. By adding Colanyl Extender MS 530, the color strength of Colanyl Blue A2R 500 can be adjusted. verkürzen | Request Sample |
| Colanyl Blue A4R 130-MX - Pigment 15:1 | Clariant Plastics and Coatings (Dispersions) | Colanyl Blue A4R 130-MX is a pigment dispersion based on phthalocyanine blue for water-based coatings. | Request Sample |
| Colanyl Blue B2G 131 - Pigment Blue 15:3 | Clariant Plastics and Coatings (Dispersions) | Colanyl Blue B2G 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of its...weiterlesen Colanyl Blue B2G 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of its good durability, it can be used for interior and exterior use after adequate weathering tests. verkürzen | Request Sample |
| Colanyl Carmine FBB 133-MX - Pigment Red 146 | Clariant Plastics and Coatings (Dispersions) | Colanyl Carmine FBB 133-MX is an aqueous pigment dispersion based on PR 146 for water-based coatings. | Request Sample |
| Colanyl Extender MS 530 - Filler | Clariant Plastics and Coatings (Dispersions) | Colanyl Extender MS 530 is an aqueous binder-free pigment preparation based on a colorless inorganic extender and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC...weiterlesen Colanyl Extender MS 530 is an aqueous binder-free pigment preparation based on a colorless inorganic extender and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* verkürzen | Request Sample |
| Colanyl Green GG 500 - Pigment Green 7 | Clariant Plastics and Coatings (Dispersions) | Colanyl Green GG 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Oxide Black B 530 - Pigment Black 11 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Black B 530 VP3206 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.*...weiterlesen Colanyl Oxide Black B 530 VP3206 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* Colanyl Oxide Black B 530 VP3206 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* verkürzen | Request Sample |
| Colanyl Oxide Black IR 500 - Pigment Green 17 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Black IR 500 VP 5148 is a aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation are compatible with water-based, VOC-free and VOC-low decorative co...weiterlesen Colanyl Oxide Black IR 500 VP 5148 is a aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation are compatible with water-based, VOC-free and VOC-low decorative coatings.* Colanyl Oxide Black IR 500 VP 5148 is a aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation are compatible with water based, VOC-free and VOC-low decorative coatings. verkürzen | Request Sample |
| Colanyl Oxide Blue COR 530 - Pigment Blue 28 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Blue COR 530 VP3210 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings. | Request Sample |
| Colanyl Oxide Green G 530 - Pigment Green 17 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Green G 530 VP 3834 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings....weiterlesen Colanyl Oxide Green G 530 VP 3834 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* verkürzen | Request Sample |
| Colanyl Oxide Red B 530 - Pigment Red 101 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Red B 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings. | Request Sample |
| Colanyl Oxide Red G 530 - Pigment Red 101 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Red G 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings. | Request Sample |
| Colanyl Oxide Yellow BV 530 - Pigment Yellow 184 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Yellow BV 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coating.* | Request Sample |
| Colanyl Oxide Yellow CR 530 - Pigment Brown 24 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Yellow CR 530 VP3198 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings...weiterlesen Colanyl Oxide Yellow CR 530 VP3198 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* verkürzen | Request Sample |
| Colanyl Oxide Yellow R 132 - MX - Pigment Yellow 42 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Yellow R 132 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because ...weiterlesen Colanyl Oxide Yellow R 132 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the excellent weathering fastness, it is suitable for interior and exterior use. verkürzen | Request Sample |
| Colanyl Oxide Yellow R 531- Pigment Yellow 42 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Yellow R 531 VP 3888 is a aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation are compatible with water-based, VOC-free and VOC-low decorative co...weiterlesen Colanyl Oxide Yellow R 531 VP 3888 is a aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation are compatible with water-based, VOC-free and VOC-low decorative coatings. verkürzen | Request Sample |
| Colanyl Pink E-WD 530 VP 5275 - Pigment Red 122 | Clariant Plastics and Coatings (Dispersions) | Colanyl Pink E-WD 530 VP 5275 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Red D3GD 500 - Pigment Red 254 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red D3GD 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Red E3B 500 - Pigment Violet 19 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red E3B 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Red E3B 500-MX - Pigment Violet 19 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red E3B 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Red F5RK 130 - MX - Pigment Red 170 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red F5RK 130 is an aqueous pigment dispersion based on PR 170 for water-based coatings. | Request Sample |
| Colanyl Red F5RK 500 - Pigment Red 170 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red F5RK 500 is a binder- and solvent-free, aqueous pigment preparation of Pigment Red 170 and based on nonionic and/or anionic wetting and dispersing agents. Recommended for water-based coatings. | Request Sample |
| Colanyl Red FGR 530 - Pigment Red 112 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red FGR 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Red FGRG 130 - MX - Pigment Red 112 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red FGRG 130 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the...weiterlesen Colanyl Red FGRG 130 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. verkürzen | Request Sample |
| Colanyl Red GG 131 - Pigment Orange 5 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red GG 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the m...weiterlesen Colanyl Red GG 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. verkürzen | Request Sample |
| Colanyl Red GG 500 - Pigment Orange 5 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red GG 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Red HF3S 500 - Pigment Red 188 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red HF3S 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Scarlet GO 530 - Pigment Red 168 | Clariant Plastics and Coatings (Dispersions) | Colanyl Scarlet GO 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Violet RL 131 - Pigment Violet 23 | Clariant Plastics and Coatings (Dispersions) | Colanyl Violet RL 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of th...weiterlesen Colanyl Violet RL 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. verkürzen | Request Sample |
| Colanyl Violet RL 530 - Pigment Violet 23 | Clariant Plastics and Coatings (Dispersions) | Colanyl Violet RL 530 VP 5335 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl White R 500 - Pigment White 6 | Clariant Plastics and Coatings (Dispersions) | Colanyl White R 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl White RN 500 - MX - Pigment White 6 | Clariant Plastics and Coatings (Dispersions) | Colanyl White RN 500-MX is a very low VOC, water-based pigment preparation of Pigment White 6. It is binder-free, solvent-free and based on nonionic and/or anionic wetting and dispersing agents. Recommended for water-based paints and coatings. | Request Sample |
| Colanyl Yellow 2GXD 130 - Pigment Yellow 74 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow 2GXD 130 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of ...weiterlesen Colanyl Yellow 2GXD 130 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. verkürzen | Request Sample |
| Colanyl Yellow 2GXD 500 - Pigment Yellow 74 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow 2GXD 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Yellow 5GX 500 - Pigment Yellow 74 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow 5GX 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Yellow FGL 500 - Pigment Yellow 97 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow FGL 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Yellow G 132 - Pigment Yellow 1 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow G 132 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the...weiterlesen Colanyl Yellow G 132 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. verkürzen | Request Sample |
| Colanyl Yellow H3G 500 - Pigment Yellow 154 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow H3G 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Yellow HRD 500 - Pigment Yellow 83 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow HRD 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| HALOX® 350 | ICL Phosphate Specialty | HALOX® 350 by ICL is a zero-VOC, highly effective 97-100% solids organic corrosion inhibitor. It is designed for water-based formulations in order to provide flash-rust inhibition, in-can rust prevention, and improved adhesion performance. It is a low-odo...weiterlesen HALOX® 350 by ICL is a zero-VOC, highly effective 97-100% solids organic corrosion inhibitor. It is designed for water-based formulations in order to provide flash-rust inhibition, in-can rust prevention, and improved adhesion performance. It is a low-odor, nitrite-free, di-carboxylic acid-based grade. It is very effective at low loading levels and offers temporary corrosion protection. HALOX® 350 is an effective replacement for toxic nitrite-based flash rust inhibitors. It is compatible with water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, and acrylics. It is also used in clear coats, thin films, and coil coatings. The recommended dosage level is 0.2-0.8% based on total solids formulation. It has a shelf life of 36 months. verkürzen | Request Sample |
| HALOX® 430 | ICL Phosphate Specialty | HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scav...weiterlesen HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scavenging and passivation mechanism. It is used in solvent-based moisture cure polyurethanes, short-, medium- & long oil alkyds & silicones, and water-based polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. HALOX® 430 is recommended for long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate is of concern. The dosage level for solvent-borne and waterborne 2K epoxy, alkyds & modified alkyds polyurethane is 6-10% & 3-6% respectively, for waterborne acrylic copolymer is 3-5%, and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. verkürzen | Request Sample |
| HALOX® 430 JM | ICL Phosphate Specialty | HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic...weiterlesen HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic, anti-corrosive pigment. It is based on the synergy between an ion scavenging and passivation mechanism. HALOX® 430 JM is recommended for use in long-term applications where the use of heavy metals such as zinc, strontium, barium, molybdenum, and chromate is of concern. It is suitable for epoxy esters, moisture-cure polyurethanes, short-, medium- & long oil alkyds, and silicones. It can also be used in clear-, powder-, aerospace- & coil coatings and wash & etch primer. It offers significant advantages such as thin film applications (<10 microns), easier to disperse, cleaner grinds, and improved efficiency. The dosage level for the coating systems such as water- & solventborne 2K epoxy is 2-6% & 8-12% & for alkyds, modified alkyds, and 2K polyurethane is 2-6% & 6-10% respectively, for waterborne acrylic copolymer is 2-5% and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. verkürzen | Request Sample |
| HALOX® 515 | ICL Phosphate Specialty | HALOX® 515 by ICL is an aminocarboxylate salt-based, liquid organic corrosion inhibitor for high gloss (direct-to-metal) coating systems. It is effective as a flash rust inhibitor on weld seams. It is suitable for water-based acrylic DTM, acrylic primers,...weiterlesen HALOX® 515 by ICL is an aminocarboxylate salt-based, liquid organic corrosion inhibitor for high gloss (direct-to-metal) coating systems. It is effective as a flash rust inhibitor on weld seams. It is suitable for water-based acrylic DTM, acrylic primers, polyurethane, water-dispersible alkyds, and water-reducible alkyds. It provides cost-effective flash rust protection and long-term corrosion protection. It is also effective for thin film applications (<2 mils). HALOX® 515 is heavy metal- & nitrite-free and contains no chromates or phosphates. It provides improved adhesion at the scribe and good humidity resistance. It can be easily and effectively post-added or added in the letdown stage of any coating system. The dosage level of the grade is 1-3% based on the total formula weight. It has a shelf life of 24 months. verkürzen | Request Sample |
| HALOX® 515 LFG | ICL Phosphate Specialty | HALOX® 515 LFG by ICL is a low-freeze, liquid organic corrosion inhibitor based on amino-carboxylate salt. It is effective as a flash rust inhibitor on weld seams. It is recommended for high gloss (direct to metal) coating systems. It provides cost-effect...weiterlesen HALOX® 515 LFG by ICL is a low-freeze, liquid organic corrosion inhibitor based on amino-carboxylate salt. It is effective as a flash rust inhibitor on weld seams. It is recommended for high gloss (direct to metal) coating systems. It provides cost-effective flash rust protection and long-term corrosion protection. It is also effective for thin-film applications (<2 mils). It is heavy metal- & nitrite-free grade and contains no chromates or phosphates. It offers improved adhesion at the scribe and good humidity resistance. HALOX® 515 LFG can easily and effectively be post-added or added in the letdown stage of any coating system. Recommended loading level is 1-3% based on total formula weight. It has a shelf life of 24 months. verkürzen | Request Sample |
| HALOX® 520 | ICL Phosphate Specialty | HALOX® 520 by ICL is a liquid organic corrosion inhibitor and adhesion promoter. It can also be used as a metal pretreatment additive. It is designed for water-borne and solvent-based coatings systems. It is polymeric amine salt, approximately 60% active ...weiterlesen HALOX® 520 by ICL is a liquid organic corrosion inhibitor and adhesion promoter. It can also be used as a metal pretreatment additive. It is designed for water-borne and solvent-based coatings systems. It is polymeric amine salt, approximately 60% active in ethanol. HALOX® 520 may be used in waterborne formulations such as 2-pack epoxy systems, 1 and 2-pack polyurethanes, acrylics (especially epoxy/amine functionalized), and hybrid systems. The dosage level of the grade is 0.5-1.5% based on total formulation solids. It has a shelf life of 36 months. verkürzen | Request Sample |
| HALOX® 550 | ICL Phosphate Specialty | HALOX® 550 by ICL is an inorganic-organic hybrid sol-gel corrosion inhibitor that protects water-based and solvent-based coatings. It can boost the adhesion of the systems through the development of a sol-gel network and the formation of hydrophobic nano-...weiterlesen HALOX® 550 by ICL is an inorganic-organic hybrid sol-gel corrosion inhibitor that protects water-based and solvent-based coatings. It can boost the adhesion of the systems through the development of a sol-gel network and the formation of hydrophobic nano-domains within the coating. It is suitable for clear coats, direct-to-metal, latex primers, thin film coatings, acrylic emulsions, water-dispersible alkyds, alkyd emulsions, polyesters, epoxy, urethane, and high gloss coatings. It is easy to disperse, post-addable, and reduces white rust on galvanized and black rust on Galvalume™. It offers increased hydrophobicity, improved anti-fingerprint, and no effect on gloss. It provides reduced silver, aluminum oxidation and high-temperature stability. HALOX® 550 is non-flammable, pH stable, and has a low freeze point. It is a temporary rust inhibitor for cold-rolled steel, blasted steel, and aluminum. It can impart corrosion resistance to final metal rinsing solutions. The dosage level for water-based acrylic is 1-4%, alkyd is 0.5-2%, epoxy is 1-4%, urethane is 0.5-3%, hybrids & others is 0.5-4%. It has a shelf life of 12 months. verkürzen | Request Sample |
| HALOX® 550 WF | ICL Phosphate Specialty | HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for the protection of water-based and solvent-based clear coats, glossy direct-...weiterlesen HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for the protection of water-based and solvent-based clear coats, glossy direct-to-metal coatings, and acrylic emulsions. It is recommended for polyurethanes, epoxies, epoxy esters, alkyds, water-reducible alkyds, PVB wash primers, and polyester resins. It is suitable for low pH and acid-catalyzed systems. The dosage level is 0.5-3.0% based on the total formula weight. HALOX® 550 WF has a shelf life of 12 months. verkürzen | Request Sample |
| HALOX® 570 | ICL Phosphate Specialty | HALOX® 570 by ICL is an organic corrosion inhibitor. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is an environmentally-friendly, nitrite-free, phos...weiterlesen HALOX® 570 by ICL is an organic corrosion inhibitor. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is an environmentally-friendly, nitrite-free, phosphate-free, and heavy metal-free, which can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams and in some cases, can also be used in solvent-based coatings and in UV-cured systems. It is used in both water-based primers and direct-to-metal topcoats and has minimal effect on gloss reduction. HALOX® 570 can be used in formulations based on water-based acrylic latexes and co-polymers, styrene/acrylic latexes, acrylated epoxy esters, thin films, 2-pack epoxy systems, alkyds, alkyd/acrylic blends, and 1 or 2 pack polyurethane. It has a shelf life of 36 months. verkürzen | Request Sample |
| HALOX® 570 LS | ICL Phosphate Specialty | HALOX® 570 LS by ICL is an organic corrosion inhibitor. It is a liquid version of HALOX® 570 (powder). It is designed for use in water-based industrial and decorative coatings. It provides flash rust and long-term corrosion protection on metal surfaces. I...weiterlesen HALOX® 570 LS by ICL is an organic corrosion inhibitor. It is a liquid version of HALOX® 570 (powder). It is designed for use in water-based industrial and decorative coatings. It provides flash rust and long-term corrosion protection on metal surfaces. It is environmentally friendly, nitrite-, phosphate- & heavy metal-free, and can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams to prevent galvanic corrosion. HALOX® 570 LS can be used in formulations based on water-based acrylics, epoxy esters, 2-component epoxy, water-reducible alkyds, and water-based polyurethanes. It is suitable for primers and direct-to-metal topcoats. It has minimal effect on gloss reduction. Recommended dosage level is 1-3% based on total formula weight. It has a shelf life of 36 months. verkürzen | Request Sample |
| HALOX® 630 | ICL Phosphate Specialty | HALOX® 630 by ICL is a liquid organic corrosion inhibitor for solvent-based protective coatings on metal surfaces. It is an alkylammonium salt solution, a 70% active substance in xylene. It can be used in solvent-borne clear or pigmented coatings and in s...weiterlesen HALOX® 630 by ICL is a liquid organic corrosion inhibitor for solvent-based protective coatings on metal surfaces. It is an alkylammonium salt solution, a 70% active substance in xylene. It can be used in solvent-borne clear or pigmented coatings and in systems such as 2-pack epoxy systems, high solids epoxy esters, alkyds, acrylic resins, silicones, polyesters, and 2-pack polyurethane primers. It is recommended for auto refinish, OEM, DTM, industrial and marine coatings. HALOX® 630 shows superior corrosion resistance over poorly prepared surfaces, such as adherent rust or oil contamination. The dosage level of the grade is 1-3% based on the total formula weight. It has a shelf life of 36 months. verkürzen | Request Sample |
| HALOX® 650 | ICL Phosphate Specialty | HALOX® 650 by ICL is a zero-VOC, organic corrosion inhibitor. It is designed specifically for solvent-based or powder-coating applications to provide long-term corrosion protection, flash-rust inhibition, in-can rust prevention, and improved adhesion perf...weiterlesen HALOX® 650 by ICL is a zero-VOC, organic corrosion inhibitor. It is designed specifically for solvent-based or powder-coating applications to provide long-term corrosion protection, flash-rust inhibition, in-can rust prevention, and improved adhesion performance. It is primarily designed for coatings and primers on metal surfaces. It can be used in applications such as coil coatings resins such as thermoplastic acrylics or epoxies, powder coatings systems such as polyester/TGIC, acid catalyzed thermosetting systems such as melamine or urea formaldehyde, and wash (etch) primers based on PVB. It is suitable for solvent-based polyurethanes, short-, medium- & long oil alkyds, and silicones. It is also suitable for clear coats, thin films, and aerospace coating. The dosage level of the grade is 1-3% based on total formulation solids. HALOX® 650 has a shelf life of 36 months. verkürzen | Request Sample |
| HALOX® 700 | ICL Phosphate Specialty | HALOX® 700 by ICL is a white, non-refractive, zinc & aluminum phosphate-based corrosion-inhibiting pigment for protective coatings. It is designed to provide coatings with early and long-term corrosion protection. It is recommended for solvent- and water-...weiterlesen HALOX® 700 by ICL is a white, non-refractive, zinc & aluminum phosphate-based corrosion-inhibiting pigment for protective coatings. It is designed to provide coatings with early and long-term corrosion protection. It is recommended for solvent- and water-based epoxy and urethane coatings. It is suitable for alkyd and acrylic coatings. It can be used in combination with HALOX® 700. The dosage level of HALOX® 700 is 5-12% based on total formula weight. It has a shelf life of 36 months. verkürzen | Request Sample |
| HALOX® BW-100 | ICL Phosphate Specialty | HALOX® BW-100 by ICL is a low-cost tannin stain-inhibiting pigment used in exterior architectural wood coatings. It is barium phosphosilicate-based, non-refractive grade used in protective coating systems. It provides minimal hiding with decent exterior d...weiterlesen HALOX® BW-100 by ICL is a low-cost tannin stain-inhibiting pigment used in exterior architectural wood coatings. It is barium phosphosilicate-based, non-refractive grade used in protective coating systems. It provides minimal hiding with decent exterior durability. It provides performance and compatibility in a variety of resin systems such as acrylic latexes, vinyl acrylic latexes, styrenated acrylic latexes, and solvent-based alkyds. It is suitable for water-based systems. It is effective in high PVC alkyd primers and demonstrates excellent performance. The dosage level of HALOX® BW-100 is 5-10% based on total formula weight. It has a shelf life of 36 months. verkürzen | Request Sample |
| HALOX® BW-111 | ICL Phosphate Specialty | HALOX® BW-111 by ICL is a low-cost barium phosphosilicate-based corrosion inhibiting pigment. It is a white, non-refractive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is recommended for use in solvent...weiterlesen HALOX® BW-111 by ICL is a low-cost barium phosphosilicate-based corrosion inhibiting pigment. It is a white, non-refractive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is recommended for use in solvent-based epoxy systems, both conventional and high solids. The dosage level is 5-10% based on total formula weight for conventional systems and 10-20% based on total formula weight in higher solids systems. HALOX® BW-111 has a shelf life of 36 months. verkürzen | Request Sample |
| HALOX® BW-191 | ICL Phosphate Specialty | HALOX® BW-191 by ICL is a corrosion-inhibiting pigment used in protective primer coating systems. It is barium phosphosilicate-based, white, non-refractive grade, and is an organic surface-treated version of HALOX®BW-111. It is recommended for most solven...weiterlesen HALOX® BW-191 by ICL is a corrosion-inhibiting pigment used in protective primer coating systems. It is barium phosphosilicate-based, white, non-refractive grade, and is an organic surface-treated version of HALOX®BW-111. It is recommended for most solvent-based and waterborne systems such as latexes and water reducible due to its lower oil absorption. HALOX® BW-191 can also be effective in anti-corrosive high solids coatings. The dosage level of the grade is 5-10% based on the total formula weight. It has a shelf life of 36 months. verkürzen | Request Sample |
| HALOX® CW-22/221 | ICL Phosphate Specialty | HALOX® CW-22/221 by ICL is a white, non-refractive, calcium borosilicate-based corrosion inhibiting pigment for protective coating systems. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, and alkyd ...weiterlesen HALOX® CW-22/221 by ICL is a white, non-refractive, calcium borosilicate-based corrosion inhibiting pigment for protective coating systems. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. It is designed for long-term corrosion protection where the use of heavy metals is discouraged. It is recommended for use in primer systems based on traditional solvent alkyd technology. Recommended dosage level is 9-15% based on total formula weight with PVC level in the range of 42-47%. It has a shelf life of 36 months. HALOX® CW-22/221 is compliant with ASTM D4288-83, specification for calcium borosilicate pigment Type 1, Class A. verkürzen | Request Sample |
| HALOX® CW-2230 | ICL Phosphate Specialty | HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in ...weiterlesen HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in protective coating systems. It is suitable for solvent-based epoxies, moisture-cure polyurethanes, polyesters, silicone, water-based epoxy, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, and acrylics. It has the highest borate content and can be effectively formulated into such resins as medium and long-oil alkyds and epoxy-esters. Recommended dosage levels range from 9-15% based on total formula weight with PVC levels ranging from 42-47%. It has a shelf life of 36 months. HALOX® CW-2230 is compliant with ASTM D4288-83, specification for calcium borosilicate pigment Type 2. verkürzen | Request Sample |
| HALOX® CW-291 | ICL Phosphate Specialty | HALOX® CW-291 by ICL is calcium borosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection where heavy metals are a concern. It is used in solvent-based epoxy esters, polyurethanes and short-, medium- & long oil alk...weiterlesen HALOX® CW-291 by ICL is calcium borosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection where heavy metals are a concern. It is used in solvent-based epoxy esters, polyurethanes and short-, medium- & long oil alkyds, and water-based epoxies, water-reducible alkyds, and alkyd dispersions. It has the lowest oil absorption. It is recommended for use in protective coating systems. HALOX® CW-291 is specifically suggested for high solids, medium gloss topcoats, DTM (direct-to-metal) finishes, and self-priming systems. Recommended dosage level is 5-10% based on total formula weight in primer systems and 2-5% based on total formula weight in topcoat & DTM finishes. It has a shelf life of 36 months. It is compliant with ASTM D4288-83, specification for calcium borosilicate pigment type 1, Class B. verkürzen | Request Sample |
| HALOX® CW-314 | ICL Phosphate Specialty | HALOX® CW-314 by ICL is a patent pending, non-toxic, heavy metal-free anti-corrosive pigment designed for use in waterborne and solvent-borne protective coating systems. It is very effective in enhancing the infrared (IR) reflectance and thermal emissivit...weiterlesen HALOX® CW-314 by ICL is a patent pending, non-toxic, heavy metal-free anti-corrosive pigment designed for use in waterborne and solvent-borne protective coating systems. It is very effective in enhancing the infrared (IR) reflectance and thermal emissivity of elastomeric roof coatings. It increases the total solar reflectance (TSR) while maintaining the dirt pick-up resistance (DPUR) and prevention mildew growth. It can be used alone or in combination with other non-toxic corrosion inhibitors and mineral pigments in the formulation of environmentally friendly specialty paints. HALOX® CW-314 is especially suited for systems where 21 CFR 175.300 approval or conformance to ANSI/NSF standards is required. It is also used in potable water tank linings and pipe coatings. The dosage level for potable water tank linings & pipe coatings is 3-8% based on total formula weight and 10-30% for elastomeric roof coatings containing calcium carbonate & titanium dioxide. It has a shelf life of 36 months. verkürzen | Request Sample |
| HALOX® CW-491 | ICL Phosphate Specialty | HALOX® CW-491 by ICL is a low-cost, moderate solubility calcium phosphosilicate-based corrosion inhibiting pigment. It is designed to provide mid-level corrosion protection. It is suitable for solvent-based epoxy, epoxy ester, and short-, medium- & long o...weiterlesen HALOX® CW-491 by ICL is a low-cost, moderate solubility calcium phosphosilicate-based corrosion inhibiting pigment. It is designed to provide mid-level corrosion protection. It is suitable for solvent-based epoxy, epoxy ester, and short-, medium- & long oil alkyds. It is also suitable for water-based epoxy, wash primers, direct-to-metal finishes, 2k solvent-based epoxies, water-reducible alkyds, acrylics, polyvinyl chloride resins, and polyesters. HALOX® CW-491 is a white, non-refractive, zinc-, & heavy metal-free grade that is used for protective coating systems. The dosage level of the grade is 5-8% based on the total formula weight for water-based systems and 7-12% based on the total formula weight for solvent-based systems. It has a shelf life of 36 months. verkürzen | Request Sample |
| HALOX® CZ-170 | ICL Phosphate Specialty | HALOX® CZ-170 by ICL is a universal corrosion and tannin stain-inhibiting pigment. It is designed for architectural and protective coating systems and multi-substrate protection. It is barium- & antimony-free, non-refractive grade. It is an effective repl...weiterlesen HALOX® CZ-170 by ICL is a universal corrosion and tannin stain-inhibiting pigment. It is designed for architectural and protective coating systems and multi-substrate protection. It is barium- & antimony-free, non-refractive grade. It is an effective replacement for zinc oxide. It can also be used in high gloss (+75 gloss units at 60°) and thin film (<1.0 mils or 25 microns) applications, due to its finer mean particle size and narrow particle size distribution. It is suitable for water-based epoxy esters, short-, medium- & long oil alkyd, and solvent-based water-reducible alkyds, alkyd dispersions, and acrylics. HALOX® CZ-170 can be used in specific systems that protect metal and wood substrates. It is also used in powder coatings and wash & etch primers. The dosage level for multi-substrate water-based systems is 2-5% by total formula weight and 0.5-2% for high gloss & thin film coatings. It has a shelf life of 36 months. verkürzen | Request Sample |
| HALOX® FLASH-X® 150 | ICL Phosphate Specialty | HALOX® FLASH-X® 150 by ICL is a liquid flash rust inhibitor. It is used in the manufacturing of water-based protective coatings for inhibition of in-can rusting in lined and unlined metal containers. It is highly effective at relatively low loading levels...weiterlesen HALOX® FLASH-X® 150 by ICL is a liquid flash rust inhibitor. It is used in the manufacturing of water-based protective coatings for inhibition of in-can rusting in lined and unlined metal containers. It is highly effective at relatively low loading levels as compared to other flash and in-can rust inhibitors. It is a low-viscosity liquid which is ideal for increasing production output. It exhibits excellent flash rust inhibitive performance on various metal substrates ranging from iron, steel, and galvanized iron to galvalume and zincalume. It is compatible with a variety of latices without causing film sensitivity or package stability problems. It can stabilize metal substrates when using the water-blasting method of surface restoration. It is easy to use and can be incorporated at any stage of coating manufacture. HALOX® FLASH-X® 150 can also be easily and effectively post-added to any coating system. The dosage level is 0.25-1% for flash rusting, 0.50-1.5% for in-can rusting, and 1.50-3% for water blasting. It has a shelf life of 24 months. verkürzen | Request Sample |
| HALOX® FLASH-X® 330 | ICL Phosphate Specialty | HALOX® FLASH-X® 330 by ICL is an effective, nitrite-free, low odor, liquid flash rust inhibitor. It is used in the manufacturing of water-based protective coatings for inhibition of in-can rusting for unlined metal containers. It is recommended for high g...weiterlesen HALOX® FLASH-X® 330 by ICL is an effective, nitrite-free, low odor, liquid flash rust inhibitor. It is used in the manufacturing of water-based protective coatings for inhibition of in-can rusting for unlined metal containers. It is recommended for high gloss systems and does not detract from gloss. It is added to water jet-blasting solutions to provide temporary protection prior to applying the protective coating. HALOX® FLASH-X® 330 is easy to use and can be incorporated at any stage of coating manufacture. It can also be easily and effectively post-added to any coating system. The dosage level for flash-rusting application is 0.5-2% and for in-can rusting is 1.5-2.5%. It has a shelf life of 24 months. verkürzen | Request Sample |
| HALOX® RC-980 | ICL Phosphate Specialty | HALOX® RC-980 by ICL is a novel organic additive designed to convert red rust to black iron oxide. It works within minutes on coating application and forms a black iron oxide barrier which can further be top-coated with water or solvent-based paints. It i...weiterlesen HALOX® RC-980 by ICL is a novel organic additive designed to convert red rust to black iron oxide. It works within minutes on coating application and forms a black iron oxide barrier which can further be top-coated with water or solvent-based paints. It is suitable for medium oil alkyds, cationic 1K epoxies, and cationic 1K acrylics. It can be used in slightly acidic waterborne vinyl or PVDC binders applied to rusted steel substrates. It shows a stable freeze cycle. It does not contain tannic acid, oxime chelates, phosphates, or phosphoric acid. The dosage level is 3-6% for water-based coatings and 7-10% for solvent-based coatings as supplied on total formula weight. The shelf life of HALOX® RC-980 is 1 year. verkürzen | Request Sample |
| HALOX® SW-111 | ICL Phosphate Specialty | HALOX® SW-111 by ICL is a zinc-free, strontium phosphosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection in high-performance resins. It is a non-refractive grade that is used in protective coating systems. It ma...weiterlesen HALOX® SW-111 by ICL is a zinc-free, strontium phosphosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection in high-performance resins. It is a non-refractive grade that is used in protective coating systems. It maintains a higher level of in-can stability. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, polyurethane dispersions, and acrylics. The dosage level is 5-10% based on the total formula weight. Synergistic properties have been found [in the areas of corrosion and humidity resistance] when HALOX® SW-111 is used in combination with HALOX® Zinc phosphate [1:1 ratio] in some waterborne systems. It has a shelf life of 36 months. verkürzen | Request Sample |
| HALOX® SZP-391 | ICL Phosphate Specialty | HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-base...weiterlesen HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyesters, and silicones. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, chlorinated polymers, and acrylics. It is designed for use in high acid value resins, latexes, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-391 make it the pigment of choice in thin film applications (<1 mil or 25 microns). The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. verkürzen | Request Sample |
| HALOX® SZP-391 JM | ICL Phosphate Specialty | HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the s...weiterlesen HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the same proprietary blend of strontium and zinc phosphosilicates as HALOX® SZP-391 at reduced particle size. It provides easy dispersion, cleaner grinds and improved efficiency. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyurethane- & alkyd dispersions, water-reducible alkyds, chlorinated polymers, acrylics, polyesters and silicones. It offers increased ease of incorporation. HALOX® SZP-391 JM is designed for use in thin film (<25 microns) and clear coats (<10 microns). It is designed for use in latexes, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. verkürzen | Request Sample |
| HALOX® SZP-395 | ICL Phosphate Specialty | HALOX® SZP-395 by ICL is a white, non-refractive, efficient, and versatile corrosion-inhibiting pigment designed for protective coating systems. It is a proprietary blend of strontium and zinc phosphosilicates. It is recommended for use in a wide variety ...weiterlesen HALOX® SZP-395 by ICL is a white, non-refractive, efficient, and versatile corrosion-inhibiting pigment designed for protective coating systems. It is a proprietary blend of strontium and zinc phosphosilicates. It is recommended for use in a wide variety of resin systems such as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-395 make it the pigment of choice in thin-film applications (<1 mil or 25 μm). The dosage level is 2-5% for water-based systems and 3-7% for solvent-based coatings based on total formula weight. It has a shelf life of 36 months. verkürzen | Request Sample |
| HALOX® XTAIN® A | ICL Phosphate Specialty | HALOX® XTAIN® A by ICL is a multi-valent tannin stain-inhibiting pigment. It is designed for exterior architectural wood coatings. It is a barium & antimony-free, white, non-refractive aluminum zirconium phosphosilicate-based inhibitor used in protective ...weiterlesen HALOX® XTAIN® A by ICL is a multi-valent tannin stain-inhibiting pigment. It is designed for exterior architectural wood coatings. It is a barium & antimony-free, white, non-refractive aluminum zirconium phosphosilicate-based inhibitor used in protective coating systems. It provides a high level of performance and compatibility in a variety of resin systems such as styrene-butadiene latexes, acrylic latexes, vinyl acrylic latexes, and solvent-based alkyds. It is also used in water-based systems. It is effective at very low loading levels. The dosage level of HALOX® XTAIN® A is 1-3% based on total formula weight. It has a shelf life of 36 months. verkürzen | Request Sample |
| HALOX® XTAIN® L-44 | ICL Phosphate Specialty | HALOX® XTAIN® L-44 by ICL is a very effective liquid tannin stain-blocking additive. It is barium & antimony-free ammonium stabilized zirconium salt. It provides high performance and good compatibility with most water-based coating systems. It can replace...weiterlesen HALOX® XTAIN® L-44 by ICL is a very effective liquid tannin stain-blocking additive. It is barium & antimony-free ammonium stabilized zirconium salt. It provides high performance and good compatibility with most water-based coating systems. It can replace zinc oxide. It is easy to post-add to a coating (1:1 with water). It eliminates the need for zinc oxide without sacrificing performance and provides improved package stability. The dosage level of HALOX® XTAIN® L-44 is 1-3% TFW. It has a shelf life of 24 months. verkürzen | Request Sample |
| HALOX® XTAIN® L-47 | ICL Phosphate Specialty | HALOX® XTAIN® L-47 by ICL is a zinc-free, ammonia-free, volatile organic compound (VOC)-free liquid tannin stain inhibiting additive. It is designed to stop tannin bleed in various waterborne coating systems such as acrylic emulsions and polyurethane disp...weiterlesen HALOX® XTAIN® L-47 by ICL is a zinc-free, ammonia-free, volatile organic compound (VOC)-free liquid tannin stain inhibiting additive. It is designed to stop tannin bleed in various waterborne coating systems such as acrylic emulsions and polyurethane dispersions (PUD) applied to a variety of wood species for example, redwood, Merbau, and oak. It offers superior performance without the need for Zn2+ cations thus conforming to European ecolabel requirements. HALOX® XTAIN® L-47 provides similar efficiency as its predecessor HALOX® XTAIN® L-44. Recommended dosage level is 1-3% based on total formula weight. verkürzen | Request Sample |
| HALOX® Z-Plex 111 | ICL Phosphate Specialty | HALOX® Z-PLEX 111 by ICL is a highly versatile and economical corrosion-inhibiting pigment. It is a zinc phosphate complex designed to compete head-to-head with standard zinc phosphate pigments. It is a white, non-refractive grade used in protective coati...weiterlesen HALOX® Z-PLEX 111 by ICL is a highly versatile and economical corrosion-inhibiting pigment. It is a zinc phosphate complex designed to compete head-to-head with standard zinc phosphate pigments. It is a white, non-refractive grade used in protective coating systems. It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyds, and water-based epoxies, polyurethanes, and polyurethane dispersions. HALOX® Z-PLEX 111 has a shelf life of 36 months. verkürzen | Request Sample |
| HALOX® Z-Plex 250 | ICL Phosphate Specialty | HALOX® Z-PLEX 250 by ICL is a white, non-refractive, corrosion-inhibiting pigment. It is an alternative to lead & chrome inorganic corrosion inhibitors. It is type I, zinc phosphate di-hydrate. It is designed for powder coatings & protective coatings. It ...weiterlesen HALOX® Z-PLEX 250 by ICL is a white, non-refractive, corrosion-inhibiting pigment. It is an alternative to lead & chrome inorganic corrosion inhibitors. It is type I, zinc phosphate di-hydrate. It is designed for powder coatings & protective coatings. It shows a high degree of versatility due to its narrow particle size distribution. It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyd, and polyesters. HALOX® Z-PLEX 250 is used in water-based epoxies, water-reducible alkyd, alkyd dispersions, and acrylics. It is compliant with ASTM D6280, Specification for Zinc Phosphate Pigment Type I. Recommended dosage level is 5-10% based on total formula weight. It has a shelf life of 36 months. verkürzen | Request Sample |
| HALOX® Z-PLEX 750 | ICL Phosphate Specialty | HALOX® Z-PLEX 750 by ICL is a hybrid corrosion inhibitor combining organic and inorganic inhibitor synergies. It offers improved humidity resistance and wet adhesion. It contains 80% less zinc compounds than traditional zinc phosphate with enhanced perfor...weiterlesen HALOX® Z-PLEX 750 by ICL is a hybrid corrosion inhibitor combining organic and inorganic inhibitor synergies. It offers improved humidity resistance and wet adhesion. It contains 80% less zinc compounds than traditional zinc phosphate with enhanced performance due to the addition of organic functionality. It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyd, and polyesters. HALOX® Z-PLEX 750 is used in water-based epoxies, water-reducible alkyd, alkyd dispersions, and acrylics. It is designed for coatings and primers on metal surfaces to cost-effectively provide the traditional function of an inorganic corrosion inhibitor with the benefits of an organic corrosion inhibitor. It possesses excellent passivation, outstanding blister resistance, and enhanced barrier properties. Recommended dosage level is 3-7% based on total formulation weight. It has a shelf life of 36 months. verkürzen | Request Sample |
| HALOX® Zinc Phosphate | ICL Phosphate Specialty | HALOX® Zinc Phosphate by ICL is a universal lead-free and chromium-free inorganic corrosion inhibitor. It is designed for water-based- and solvent-based coatings. It is a white, non-refractive grade used in protective coating systems. It is generically id...weiterlesen HALOX® Zinc Phosphate by ICL is a universal lead-free and chromium-free inorganic corrosion inhibitor. It is designed for water-based- and solvent-based coatings. It is a white, non-refractive grade used in protective coating systems. It is generically identified as zinc phosphate-dihydrate. It exhibits a narrow particle size distribution. It has a high degree of versatility. HALOX® Zinc Phosphate is recommended for most high-performance resin systems such as vinyl, chlorinated rubbers, and epoxies. It is also used in high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. It is also recommended for thin-film applications (1 mil or 25 microns). It is compliant with ASTM D6280-98 specification for zinc phosphate pigment type I. The dosage level is 5-15% based on the total formula weight. It has a shelf life of 36 months. verkürzen | Request Sample |
| Hostafine Black T 30 - Pigment Black 7 | Clariant Plastics and Coatings (Dispersions) | Hostafine Black T 30 is a pigment dispersion of approx. 30% pigment and is based on nonionic dispersing and wetting agents and glycol. The Colour Index of the basic pigment is Pigment Black 7. The extremly low particle size distribution gives an excellent...weiterlesen Hostafine Black T 30 is a pigment dispersion of approx. 30% pigment and is based on nonionic dispersing and wetting agents and glycol. The Colour Index of the basic pigment is Pigment Black 7. The extremly low particle size distribution gives an excellent gloss, transparency and sedimentation properties in aqueous systems. Hostafine pigment preparations are especially suitable for water-based transparent wood stains. They can also be used for other applications such as aqueous emulsion paints, glass paints, water-colors, latex and water resistant inks, inks for fiber-tip fineliner and roller-tip pens. A final evaluation in the customer system is necessary. verkürzen | Request Sample |
| Hostafine Black TS 30 - Pigment Black 7 | Clariant Plastics and Coatings (Dispersions) | Hostafine Black TS 30 is a pigment dispersion of approx. 33% pigment and is based on nonionic dispersing and wetting agents and is glycolfree. The Colour Index of the basic pigment is Pigment Black 7. The extremly low particle size distribution gives very...weiterlesen Hostafine Black TS 30 is a pigment dispersion of approx. 33% pigment and is based on nonionic dispersing and wetting agents and is glycolfree. The Colour Index of the basic pigment is Pigment Black 7. The extremly low particle size distribution gives very good gloss, transparency and sedimentation properties in aqueous systems. Mainly used in stationery, shoe care products and woodstains. Hostafine pigment preparations are especially suitable for water-based transparent wood stains. They can also be used for other applications such as aqueous emulsion paints, glass paints, water-colors, latex and water resistant inks, inks for fiber-tip fineliner and roller-tip pens. A final evaluation in the customer system is necessary. verkürzen | Request Sample |
| Hostafine Blue B2G - Pigment Blue 15:3 | Clariant Plastics and Coatings (Dispersions) | Hostafine Blue B2G is a pigment dispersion of approx. 40% pigment and is based on nonionic dispersing and wetting agents and glycol. The Colour Index of the basic pigment is Pigment Blue 15:3. The extremly low particle size distribution gives very good gl...weiterlesen Hostafine Blue B2G is a pigment dispersion of approx. 40% pigment and is based on nonionic dispersing and wetting agents and glycol. The Colour Index of the basic pigment is Pigment Blue 15:3. The extremly low particle size distribution gives very good gloss, transparency and sedimentation properties in aqueous systems. Suitable for stationery, woodstains, latex, viscose fibres, detergents. Hostafine pigment preparations are especially suitable for water-based transparent wood stains. They can also be used for other applications such as aqueous emulsion paints, glass paints, water-colors, latex and water resistant inks, inks for fiber-tip fineliner and roller-tip pens. A final evaluation in the customer system is necessary. verkürzen | Request Sample |
| Hostafine Brown HFR - Pigment Brown 25 | Clariant Plastics and Coatings (Dispersions) | Hostafine Brown HFR is an ultra fine pigment dispersion based on benzimidazolone brown for water-based coatings, inks and emulsions. | Request Sample |
| Hostafine Green GN - Pigment Green 7 | Clariant Plastics and Coatings (Dispersions) | Hostafine Green GN is a pigment dispersion of approx. 40% pigment and is based on nonionic dispersing and wetting agents and glycol. The Colour Index of the basic pigment is Pigment Green 7. The extremly low particle size distribution gives very good glos...weiterlesen Hostafine Green GN is a pigment dispersion of approx. 40% pigment and is based on nonionic dispersing and wetting agents and glycol. The Colour Index of the basic pigment is Pigment Green 7. The extremly low particle size distribution gives very good gloss, transparency and sedimentation properties in aqueous systems. It is suitable for stationery, woodstains, latex, viscose fibres and detergents. verkürzen | Request Sample |
| Hostafine Magenta E - Pigment Red 122 | Clariant Plastics and Coatings (Dispersions) | Hostafine Magenta E is a pigment dispersion of approx. 20% pigment and is based on nonionic dispersing and wetting agents and glycol. The Colour Index of the basic pigment is Pigment Red 122. The extremly low particle size distribution gives very good glo...weiterlesen Hostafine Magenta E is a pigment dispersion of approx. 20% pigment and is based on nonionic dispersing and wetting agents and glycol. The Colour Index of the basic pigment is Pigment Red 122. The extremly low particle size distribution gives very good gloss, transparency and sedimentation properties in aqueous systems. It is suitable for ink jet inks, stationery, woodstains, latex, viscose fibres and detergents. verkürzen | Request Sample |
| Hostafine Red F5RK - Pigment Red 170 | Clariant Plastics and Coatings (Dispersions) | Hostafine Red F5RK is a pigment preparation of approx. 35% pigment and is based on nonionic dispersing and wetting agents and glycol. The Colour Index of the basic pigment is Pigment Red 170. The extremly low particle size distribution gives very good glo...weiterlesen Hostafine Red F5RK is a pigment preparation of approx. 35% pigment and is based on nonionic dispersing and wetting agents and glycol. The Colour Index of the basic pigment is Pigment Red 170. The extremly low particle size distribution gives very good gloss, transparency and sedimentation properties in aqueous systems. It is suitable for woodstains, stationery and shoe polishes. Hostafine pigment preparations are especially suitable for water-based transparent wood stains. They can also be used for other applications such as aqueous emulsion paints, glass paints, water-colors, latex and water resistant inks, inks for fiber-tip fineliner and roller-tip pens. A final evaluation in the customer system is necessary. verkürzen | Request Sample |
| Hostafine Red FGR - Pigment Red 112 | Clariant Plastics and Coatings (Dispersions) | Hostafine Red FGR is a pigment dispersion of approx. 45% pigment and is based on nonionic dispersing and wetting agents and glycol. The Colour Index of the basic pigment is Pigment Red 112. The extremly low particle size distribution gives very good gloss...weiterlesen Hostafine Red FGR is a pigment dispersion of approx. 45% pigment and is based on nonionic dispersing and wetting agents and glycol. The Colour Index of the basic pigment is Pigment Red 112. The extremly low particle size distribution gives very good gloss, transparency and sedimentation properties in aqueous systems. Hostafine Red FGR is suitable for stationery, woodstains, latex, viscose fibres and detergents. Hostafine pigment preparations are especially suitable for water-based transparent wood stains. They can also be used for other applications such as aqueous emulsion paints, glass paints, water-colors, latex and water resistant inks, inks for fiber-tip fineliner and roller-tip pens. A final evaluation in the customer system is necessary. verkürzen | Request Sample |
| Hostafine Red HF3S - Pigment Red 188 | Clariant Plastics and Coatings (Dispersions) | Hostafine Red HF3S is a pigment dispersion of approx. 40% pigment and is based on nonionic dispersing and wetting agents and glycol. The Colour Index of the basic pigment is Pigment Red 188. The extremly low particle size distribution gives very good glos...weiterlesen Hostafine Red HF3S is a pigment dispersion of approx. 40% pigment and is based on nonionic dispersing and wetting agents and glycol. The Colour Index of the basic pigment is Pigment Red 188. The extremly low particle size distribution gives very good gloss, transparency and sedimentation properties in aqueous systems. Hostafine Red HF3S is suitable for stationery, woodstains, latex and viscose fibres. Hostafine pigment preparations are especially suitable for water-based transparent wood stains. They can also be used for other applications such as aqueous emulsion paints, glass paints, water-colors, latex and water resistant inks, inks for fiber-tip fineliner and roller-tip pens. A final evaluation in the customer system is necessary. verkürzen | Request Sample |
