Aquaflow™ NHS-300E | Ashland | Aquaflow™ NHS-300E is a solvent-free, nonionic synthetic associative thickener designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build an...weiterlesen Aquaflow™ NHS-300E is a solvent-free, nonionic synthetic associative thickener designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build and favorable brush drag. This product is compatible with acrylic, styrene-acrylic, vinyl-acrylic, and vinyl acetate ethylene (VAE) latexes, and can be used in interior and exterior paint formulations. verkürzen | |
Aquaflow™ NHS-350E | Ashland | Aquaflow™ NHS-350E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development...weiterlesen Aquaflow™ NHS-350E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build and favorable brush drag. It is intended to be used in combination with a low-shear effective NSAT (KU driver) for the optimal balance of Stormer (KU) and ICI viscosity. verkürzen | |
Aquaflow™ NHS-360 | Ashland | Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most modern latex resin systems and all sheens. This thickener provi...weiterlesen Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most modern latex resin systems and all sheens. This thickener provides highly efficient ICI viscosity development, excellent film build, optimal flow and leveling and favorable brush drag. verkürzen | |
Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 is a nonionic associative polymer solution designed to increase Stormer consistency and provide superior flow and leveling in waterborne paints and coatings. | |
Aquaflow™ NLS-220E | Ashland | Aquaflow™ NLS-220E is a nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. This thickener is solvent free and is supplied as a low-viscosity liquid for eas...weiterlesen Aquaflow™ NLS-220E is a nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. This thickener is solvent free and is supplied as a low-viscosity liquid for easy transfer and incorporation. It significantly reduces or eliminates latex agglomeration in paints containing vinyl-acrylic and vinyl acetate-ethylene latexes. verkürzen | |
Aquaflow™ NMS-450E | Ashland | Aquaflow™ NMS-450E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all sheen levels. This product is designed to provide a b...weiterlesen Aquaflow™ NMS-450E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all sheen levels. This product is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as as the sole thickener in paint formulations based on hydrophobic resins, such as acrylics and styrene acrylics. verkürzen | |
Aquaflow™ NMS-460E | Ashland | Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of S...weiterlesen Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as the sole thickener in many paint formulation based on hydrophobic resins, such as acrylics and styrene acrylics. With more hydrophilic resins, such as vinyl acetate ethylene (VAE), optimized rheology may be achieved with Aquaflow™ NMS-460E rheology modifier alone or in combination with a supplemental KU driver. verkürzen | |
Aquaflow™ XLS-500E | Ashland | Aquaflow™ XLS-500E is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is highly effective with 100% acrylic and styrene-acrylic resin systems. This product provides an exceptional balance of l...weiterlesen Aquaflow™ XLS-500E is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is highly effective with 100% acrylic and styrene-acrylic resin systems. This product provides an exceptional balance of leveling and sag resistance when used in combination with a high shear effective NSAT. The optimized rheology modifier package will deliver superior leveling and sag resistance resulting in virtually drip-free application. verkürzen | |
Aquaflow™ XLS-525E | Ashland | Aquaflow™ XLS-525E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is effective with most latex systems. This product provides an exceptional balance of leveling and sag r...weiterlesen Aquaflow™ XLS-525E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is effective with most latex systems. This product provides an exceptional balance of leveling and sag resistance when used in combination with a high-shear effective NSAT. The optimized rheology modifier package will deliver superior leveling and sag resistance resulting in virtually drip-free application. verkürzen | |
Aquaflow™ XLS-530E | Ashland | Aquaflow™ XLS-530E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It imparts superior application properties including applied hiding, roller transfer and coverage. It impar...weiterlesen Aquaflow™ XLS-530E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It imparts superior application properties including applied hiding, roller transfer and coverage. It imparts a rich and creamy in-can feel and is effective with a wide range of latex chemistries, including styrene acrylic, acrylic, vinyl acrylic, and vinyl acetate ethylene (VAE). verkürzen | |
BLACK PEARLS® 120 | Cabot Corporation - Additives | BLACK PEARLS® 120 is a regular color opacifying and tinting carbon black with low to medium weatherability. It offers good blue undertones and high loadings in masterbatches. This product is well suited for use in printing inks, toners, plastics, and coat...weiterlesen BLACK PEARLS® 120 is a regular color opacifying and tinting carbon black with low to medium weatherability. It offers good blue undertones and high loadings in masterbatches. This product is well suited for use in printing inks, toners, plastics, and coatings. verkürzen | |
BLACK PEARLS® 1300 | Cabot Corporation - Additives | BLACK PEARLS® 1300 is a carbon black additive for liquid and powder coatings that require standard masstone jetness. This pigment imparts strong blue undertone and level of gloss. It can be used in plastic molding applications. This product is well suited...weiterlesen BLACK PEARLS® 1300 is a carbon black additive for liquid and powder coatings that require standard masstone jetness. This pigment imparts strong blue undertone and level of gloss. It can be used in plastic molding applications. This product is well suited for use in automotive coatings, plastics, and rubber. verkürzen | |
BLACK PEARLS® 160 | Cabot Corporation - Additives | BLACK PEARLS® 160 is a regular color opacifying and tinting carbon black offering good dispersability for plastic film and molding applications. This product is well suited for use in printing inks, toners, plastics, and coatings. | |
BLACK PEARLS® 280 | Cabot Corporation - Additives | BLACK PEARLS® 280 is a general purpose, easy-to-disperse carbon black with good ultraviolet and weatherability characteristics. This product is well suited for use in printing inks, toners, plastics, and coatings. | |
BLACK PEARLS® 3560 | Cabot Corporation - Additives | BLACK PEARLS® 3560 is a specialty carbon black pigment featuring high color strength and cleanliness properties, reduced fiber breakage, and consistent quality. This product is well suited for use in the coloration of synthetic fibers, including staple fi...weiterlesen BLACK PEARLS® 3560 is a specialty carbon black pigment featuring high color strength and cleanliness properties, reduced fiber breakage, and consistent quality. This product is well suited for use in the coloration of synthetic fibers, including staple fibers, bulk continuous fibers, and monofilaments. verkürzen | |
BLACK PEARLS® 4040 | Cabot Corporation - Additives | BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and si...weiterlesen BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and silage film, irrigation pipe and tape, and general purpose film and sheet. verkürzen | |
BLACK PEARLS® 4560i | Cabot Corporation - Additives | BLACK PEARLS® 4560i is a specialty carbon black pigment featuring good color, excellent cleanliness, easy processing, and consistent quality. This product is well suited for use in synthetic fiber and masterbatch applications. | |
BLACK PEARLS® 4840 | Cabot Corporation - Additives | BLACK PEARLS® 4840 is a medium color, highly dispersible specialty carbon black. Its characteristics are high jetness and good surface smoothness in engineering resin and plastic molding applications. This product is well suited for automotive interior, e...weiterlesen BLACK PEARLS® 4840 is a medium color, highly dispersible specialty carbon black. Its characteristics are high jetness and good surface smoothness in engineering resin and plastic molding applications. This product is well suited for automotive interior, electronic, business machine and similar applications, plastic, and rubber. verkürzen | |
BLACK PEARLS® 5560 | Cabot Corporation - Additives | BLACK PEARLS® 5560 is a high jetness, specialty carbon black that provides ultraviolet protection, good blue tone and cleanliness. This product is well suited for use in fiber applications. | |
BLACK PEARLS® 570 | Cabot Corporation - Additives | BLACK PEARLS® 570 is a specialty carbon black pigment that provides good coloration and covering power. This product is well suited for use in decorative, industrial and powder coating applications. | |
BLACK PEARLS® 717 | Cabot Corporation - Additives | BLACK PEARLS® 717 is a medium color specialty carbon black that delivers a balance of medium jetness, a deep blue undertone, easy processing, and good surface quality for coloration of plastic molded parts. This product is well suited for use in resins fo...weiterlesen BLACK PEARLS® 717 is a medium color specialty carbon black that delivers a balance of medium jetness, a deep blue undertone, easy processing, and good surface quality for coloration of plastic molded parts. This product is well suited for use in resins for appliances, sport, leisure and toy products, housewares, packaging and containers, and automotive and electronics applications. verkürzen | |
BLACK PEARLS® 800 | Cabot Corporation - Additives | BLACK PEARLS® 800 is a specialty carbon black additive used for high jetness black coloration of plastic parts. It features low viscosity, blue undertone, UV protection, good dispersability, and imparts good molded part surface quality. This product is we...weiterlesen BLACK PEARLS® 800 is a specialty carbon black additive used for high jetness black coloration of plastic parts. It features low viscosity, blue undertone, UV protection, good dispersability, and imparts good molded part surface quality. This product is well suited for use in automotive interiors, consumer electronice, and home appliances. verkürzen | |
BLACK PEARLS® 880 | Cabot Corporation - Additives | BLACK PEARLS® 880 is a specialty carbon black that has good dispersion combined with a balance of color strength, ultraviolet protection, and masterbatch loading. This product is well suited for use in engineering resin plastic molding. | |
BLACK PEARLS® 900 | Cabot Corporation - Additives | BLACK PEARLS® 900 is a specialty carbon black additive for resin molding applications that balances good jetness performance with masterbatch viscosity. This product is well suited for use in automotive interiors, consumer electronics, and home appliances...weiterlesen BLACK PEARLS® 900 is a specialty carbon black additive for resin molding applications that balances good jetness performance with masterbatch viscosity. This product is well suited for use in automotive interiors, consumer electronics, and home appliances. verkürzen | |
BLANOSE™ Refined CMC | Ashland | BLANOSE™ Refined CMC is a water soluble polymer that acts as a thickener, rheology control agent, binder, stabilizer, protective colloid, film former and water retention aid for use in a variety of industrial applications. Supplied in various viscosity ra...weiterlesen BLANOSE™ Refined CMC is a water soluble polymer that acts as a thickener, rheology control agent, binder, stabilizer, protective colloid, film former and water retention aid for use in a variety of industrial applications. Supplied in various viscosity ranges. verkürzen | |
CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...weiterlesen CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. verkürzen | |
CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...weiterlesen CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. verkürzen | |
CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...weiterlesen CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. verkürzen | |
CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...weiterlesen CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. verkürzen | |
CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...weiterlesen CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. verkürzen | |
CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...weiterlesen CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. verkürzen | |
CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...weiterlesen CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. verkürzen | |
CSX™ 691 | Cabot Corporation - Additives | CSX™ 691 is a specialty regular color carbon black pigment that has a low surface area and can be used as an alternative to lamp black. It has good tinting performance and good dispersibility. This product is well suited for use in tinting black in plasti...weiterlesen CSX™ 691 is a specialty regular color carbon black pigment that has a low surface area and can be used as an alternative to lamp black. It has good tinting performance and good dispersibility. This product is well suited for use in tinting black in plastics and liquid dispersions, and as an IR opacifier in EPS foams. verkürzen | |
Culminal™ C-types modified cellulose ethers | Ashland | Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plas...weiterlesen Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plasters, fillers, adhesives and spackling compounds, cement and lime based plasters, tile cements and similar products. verkürzen | |
Culminal™ CT methylhydroxyethylcellulose | Ashland | Culminal™ CT methylhydroxyethylcellulose are cellulose ethers that, when dissolved in water, offer a variety of functional properties. They are powders, which are used as rheology modifiers, stabilizers, and water-retention agents in emulsion paints. | |
CULMINAL™ Methylcellulose Derivatives | Ashland | CULMINAL™ Methylcellulose Derivatives are cellulose ethers that, when dissolved in water, offer a variety of functional properties. Culminal products are powders, they are used as thickeners, protective colloids, stabilizers, susp ending aids and water-re...weiterlesen CULMINAL™ Methylcellulose Derivatives are cellulose ethers that, when dissolved in water, offer a variety of functional properties. Culminal products are powders, they are used as thickeners, protective colloids, stabilizers, susp ending aids and water-retention agents in many industrial applications. verkürzen | |
Dextrol™ OC-180 | Ashland | Dextrol™ OC-180 is the neutralized (potassium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. | |
Dextrol™ OC-180HS Phosphate Ester Surfactant | Ashland | Dextrol™ OC-180HS surfactant is the neutralized (sodium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. Depending on the formulation specifics, this p...weiterlesen Dextrol™ OC-180HS surfactant is the neutralized (sodium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. Depending on the formulation specifics, this product can also function as a supplemental dispersant to assist in reduction of pigment flocculation. In addition to use in latex paint, Dextrol™ OC-180HS surfactant provides benefits in universal colorants, to help disperse and stabilize the pigments, thereby enhancing color acceptance of water-based paints. verkürzen | |
Dextrol™ OC-60 | Ashland | Dextrol™ OC-60 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
Dextrol™ OC-6025 | Ashland | Dextrol™ OC-6025 is a ammonium hydroxide salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
Dextrol™ OC-60EP | Ashland | Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...weiterlesen Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-60EP surfactant can be neutralized using several organic or inorganic bases. Dextrol OC-60EP surfactant also imparts improved gloss and color acceptance in waterborne latex paints. verkürzen | |
Dextrol™ OC-70 | Ashland | Dextrol™ OC-70 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
Dextrol™ OC-70EP | Ashland | Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...weiterlesen Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-70EP phosphate ester surfactant can be neutralized by the user using a number of organic or inorganic bases. verkürzen | |
Dextrol™ OC-7525 | Ashland | Dextrol™ OC-7525 is a ammonium hydroxide salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
Drew™ 210-694 | Ashland | Drew™ 210-694 is a foam control agent for use in coatings and printing inks. This product is particularly recommended for acrylate-based wood lacquers. Excellent results have also been obtained in acrylate-alkyd hybrid based industrial wood coatings. Drew...weiterlesen Drew™ 210-694 is a foam control agent for use in coatings and printing inks. This product is particularly recommended for acrylate-based wood lacquers. Excellent results have also been obtained in acrylate-alkyd hybrid based industrial wood coatings. Drew™ 210-694 is a highly efficient foam control agent with excellent persistency. verkürzen | |
Drew™ 210-862 | Ashland | Drew™ 210-862 is a highly active foam control agent. It has been developed for use in water based coating systems that require a high level of (micro-) foam control under sever application conditions. Due to the high purity of the components used for form...weiterlesen Drew™ 210-862 is a highly active foam control agent. It has been developed for use in water based coating systems that require a high level of (micro-) foam control under sever application conditions. Due to the high purity of the components used for formulating Drew™ 210-862, this agent is also suitable for use in coating systems that require a high level of compliance with regards to food contact. verkürzen | |
Drew™ 210-886 | Ashland | Drew™ 210-886 is a foam control agent, especially designed for use in surface coatings, overprint varnishes and the synthesis of polymer emulsions. Due to its high ease of incorporation, it has proven particularly suitable for low viscous coating systems ...weiterlesen Drew™ 210-886 is a foam control agent, especially designed for use in surface coatings, overprint varnishes and the synthesis of polymer emulsions. Due to its high ease of incorporation, it has proven particularly suitable for low viscous coating systems such as sealers and topcoats applied by flowcoat, dip, curtain coating or roller and brush. At elevated dosage levels, Drew™ 210-886 exhibits excellent performance in spray or airless spray applied high build topcoats. verkürzen | |
Drew™ 210-903 | Ashland | Drew™ 210-903 is a 100% active product based on alcohols and polyols and is for use at temperatures about 55° C in application such as PVC synthesis and monomer stripping. At temperatures below 50° C, Drew™ 210-903 does not have any foam suppressing activ...weiterlesen Drew™ 210-903 is a 100% active product based on alcohols and polyols and is for use at temperatures about 55° C in application such as PVC synthesis and monomer stripping. At temperatures below 50° C, Drew™ 210-903 does not have any foam suppressing activity. verkürzen | |
Drewplus™ L-1311E Foam Control Agent | Ashland | Drewplus™ L-1311E is a foam control agent based on mineral-oil technology designed for architectural paints and coatings. It provides excellent long-term foam control persistency, and prevents air entraining as well as the formation of micro and macro foa...weiterlesen Drewplus™ L-1311E is a foam control agent based on mineral-oil technology designed for architectural paints and coatings. It provides excellent long-term foam control persistency, and prevents air entraining as well as the formation of micro and macro foam on the paint film surface. This product is designed for use in a wide range of water-based systems and is particularly suitable for emulsion paints and plasters. verkürzen | |
Drewplus™ L-1513 Foam Control Agent | Ashland | Drewplus™ L-1513 is a 100% active foam control agent designed specifically for use in water-based paint systems. Drewplus™ L-1513 is a high efficiency, hydrocarbon oil-based antifoaming agent, and is formulated to control foam at any point during manufact...weiterlesen Drewplus™ L-1513 is a 100% active foam control agent designed specifically for use in water-based paint systems. Drewplus™ L-1513 is a high efficiency, hydrocarbon oil-based antifoaming agent, and is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. Drewplus™ L-1513 foam control agent is readily dispersible and has an outstanding long-term foam control persistency. verkürzen | |
Drewplus™ L-1600 Foam Control Agent | Ashland | Drewplus™ L-1600 foam control agent is a 100% active, high-efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or...weiterlesen Drewplus™ L-1600 foam control agent is a 100% active, high-efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. Drewplus™ L-1600 foam control agent is dispersible in a water-based coating system and provides outstanding initial and long-term foam control. verkürzen | |
Drewplus™ L-1700 Foam Control Agent | Ashland | Drewplus™ L-1700 Foam Control Agent is a 100% active, high efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or...weiterlesen Drewplus™ L-1700 Foam Control Agent is a 100% active, high efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. This product is dispersible in a water-based coating system and provides outstanding initial and long-term foam control. verkürzen | |
Drewplus* L-3500 Foam Control Agent | Ashland | Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spr...weiterlesen Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spray, air mix or HVLP. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. verkürzen | |
Drewplus™ L-3510 Foam Control Agent | Ashland | Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatib...weiterlesen Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. verkürzen | |
Drewplus™ S-4273 Foam Control Agent | Ashland | Drewplus™ S-4273 Foam Control Agent is designed for use in surface coatings and printing inks. This product is recommended for foam control in industrial wood coatings, semi-gloss, high-gloss architectural paints and adhesives. Excellent results have also...weiterlesen Drewplus™ S-4273 Foam Control Agent is designed for use in surface coatings and printing inks. This product is recommended for foam control in industrial wood coatings, semi-gloss, high-gloss architectural paints and adhesives. Excellent results have also been achieved in flexographic printing inks and overprint varnishes. verkürzen | |
Drewplus™ S-4287 | Ashland | Drewplus™ S-4287 (formerly known as DREW 210-793) is a foam control agent for use in water based coatings. It is particularly recommended for high-gloss decorative paints. Excellent results have also been obtained in parquet lacquers. It also provides exc...weiterlesen Drewplus™ S-4287 (formerly known as DREW 210-793) is a foam control agent for use in water based coatings. It is particularly recommended for high-gloss decorative paints. Excellent results have also been obtained in parquet lacquers. It also provides excellent deaeration properties in low viscous (airless) sprayable systems. Drewplus™ S-4287 exhibits a superb balance between activity and compatibility and is highly efficient. It is a product with zero V.O.C. verkürzen | |
Drewplus™ S-4288 Foam Control Agent | Ashland | Drewplus™ S-4288 foam control agent is a non-ionic proprietary formulation of surface active agents, silicones. it is designed for use in water-based coatings. Drewplus™ S-4288 foam control agent is recommended for high-gloss decorative paints. Excellent ...weiterlesen Drewplus™ S-4288 foam control agent is a non-ionic proprietary formulation of surface active agents, silicones. it is designed for use in water-based coatings. Drewplus™ S-4288 foam control agent is recommended for high-gloss decorative paints. Excellent results have also been obtained in parquet lacquers. Drewplus™ S-4288 foam control agent provides excellent deaeration properties in low viscous (airless) sprayable systems. Drewplus™ S-4288 foam control agent exhibits a superb balance between activity and compatibility and is highly efficient. verkürzen | |
Drewplus™ S-4374 Foam Control Agent | Ashland | Drewplus™ S-4374 foam control agent is especially designed for use in surface coatings, overprint varnishes and pigmented inks. The product has proven particularly suitable for use in industrial wood coatings, applied by flow coat, dip, curtain coating or...weiterlesen Drewplus™ S-4374 foam control agent is especially designed for use in surface coatings, overprint varnishes and pigmented inks. The product has proven particularly suitable for use in industrial wood coatings, applied by flow coat, dip, curtain coating or spray; and also exhibits excellent performance in brush or roller applied wood coating systems. Drewplus™ S-4374 foam control agent is a 40 percent active emulsion of surface active agents and hydrophobes in water. verkürzen | |
Drewplus™ S-4386 Foam Control Agent | Ashland | Drewplus™ S-4386 Foam Control Agent is a non-ionic aqueous emulsion of silica derivatives, silicones, and surfactants. It is formulated for use in water-based coatings, printing inks, graphic arts, wood coatings and high-gloss decorative paints. It is a h...weiterlesen Drewplus™ S-4386 Foam Control Agent is a non-ionic aqueous emulsion of silica derivatives, silicones, and surfactants. It is formulated for use in water-based coatings, printing inks, graphic arts, wood coatings and high-gloss decorative paints. It is a highly efficient foam control agent with fast performance, excellent persistency and compatibility. verkürzen | |
Drewplus™ S-4480 Foam Control Agent | Ashland | Drewplus™ S-4480 foam control agent is a non-ionic blend of silicones and paraffinic oil. It is formulated for use in water-based coatings, particularly in clear systems. It is a highly efficient foam control agent with fast performance, excellent persist...weiterlesen Drewplus™ S-4480 foam control agent is a non-ionic blend of silicones and paraffinic oil. It is formulated for use in water-based coatings, particularly in clear systems. It is a highly efficient foam control agent with fast performance, excellent persistence and compatibility. Since it functions as an air-release agent, it is particularly effective on microfoam in spray-applied coatings. verkürzen | |
Drewplus™ T-1201 Foam Control Agent | Ashland | Drewplus™ T-1201 is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201 is particularly recommended for SBR and acrylic emulsions. It may be used both...weiterlesen Drewplus™ T-1201 is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201 is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of polymer emulsions. verkürzen | |
Drewplus™ T-1201E Foam Control Agent | Ashland | Drewplus™ T-1201E is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201E is particularly recommended for SBR and acrylic emulsions. It may be used bo...weiterlesen Drewplus™ T-1201E is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201E is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of polymer emulsions. verkürzen | |
Drewplus™ T-1202E Foam Control Agent | Ashland | Drewplus™ T-1202E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Because of its excellent compatibility, Drewplus™ T-1202E is particularly recommended for SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. | |
Drewplus™ T-3200 Foam Control Agent | Ashland | Drewplus™ T-3200 is a foam control agent for use in coatings, emulsion polymerization processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-3200 is particularly recommended for SBR and acrylic emulsions. It may be...weiterlesen Drewplus™ T-3200 is a foam control agent for use in coatings, emulsion polymerization processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-3200 is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of emulsions. Drewplus™ T-3200 is a non-ionic proprietary formulation of silica derivatives, paraffinic oil and esters. verkürzen | |
Drewplus™ T-3211 Foam Control Agent | Ashland | Drewplus™ T-3211 is a foam control agent for use in coatings, emulsion polymerisation processes and adhesives. Excellent results have been achieved in acrylic paper coatings and pressure sensitive adhesives. Drewplus™ T-3211exhibits excellent foam control...weiterlesen Drewplus™ T-3211 is a foam control agent for use in coatings, emulsion polymerisation processes and adhesives. Excellent results have been achieved in acrylic paper coatings and pressure sensitive adhesives. Drewplus™ T-3211exhibits excellent foam control whilst not causing problems with surface wetting. Drewplus™ T-3211 is a 100% active, non-ionic proprietary formulation of silica derivatives, paraffinic oil and esters. verkürzen | |
Drewplus™ T-4201 Foam Control Agent | Ashland | Drewplus™ T-4201 is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsio...weiterlesen Drewplus™ T-4201 is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. Drewplus™ T-4201 foam control agent is a 100- percent active, non-ionic proprietary formulation of silica derivatives, mineral oil and esters. verkürzen | |
Drewplus™ T-4201E Foam Control Agent | Ashland | Drewplus™ T-4201E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsi...weiterlesen Drewplus™ T-4201E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. Drewplus™ T-4201E foam control agent is a 100- percent active, non-ionic proprietary formulation of silica derivatives, mineral oil and esters. verkürzen | |
Drewplus™ T-4202E Foam Control Agent | Ashland | Drewplus™ T-4202E is a foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. | |
Drewplus™ T-4303 | Ashland | Drewplus™ T-4303 is a 100% active foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. Drewplus™ ...weiterlesen Drewplus™ T-4303 is a 100% active foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. Drewplus™ T-4303 is a non-ionic proprietary formulation of silica derivatives, mineral oil and esters. verkürzen | |
Drewplus™ T-4500E Foam Control Agent | Ashland | Drewplus™ T-4500E is a foam control agent for use in coating and emulsion polymerization processes. It is particularly recommended for flat and semi-gloss decorative paints. | |
Drewplus™ TS-2200 Foam Control Agent | Ashland | Drewplus™ TS-2200 is a foam control agent for use in coatings and emulsion polymerization processes. Because of its excellent compatibility, this product is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture...weiterlesen Drewplus™ TS-2200 is a foam control agent for use in coatings and emulsion polymerization processes. Because of its excellent compatibility, this product is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of emulsions. verkürzen | |
Drewplus™ TS-4384 Foam Control Agent | Ashland | Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-glos...weiterlesen Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss acrylic architectural paints, water- based parquet lacquers. Excellent results have also been obtained in acrylic anti- corrosive primers, flexographic printing inks and water-reducible alkyd based systems. Drewplus™ TS-4384 foam control agent is highly efficient and exhibits excellent persistency. verkürzen | |
Drewplus™ TS-4385 Foam Control Agent | Ashland | Drewplus™ TS-4385 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss architectural paints and parquet lacquers. Excellent results have also been obtained...weiterlesen Drewplus™ TS-4385 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss architectural paints and parquet lacquers. Excellent results have also been obtained in acrylic anti-corrosive primers, flexographic printing inks and water-reducible alkyd based systems. This product is highly efficient and exhibits excellent persistence. verkürzen | |
Drewplus™ TS-4387 Foam Control Agent | Ashland | Drewplus™ TS-4387 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for flexographic printing inks, overprint varnishes and wood lacquers. | |
Drewplus™ TS-4481 Foam Control Agent | Ashland | Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and c...weiterlesen Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and compatibility. Since it functions as an air release agent it is particularly effective on microfoam in spray-applied industrial coatings. verkürzen | |
Drewplus™ TS-4582 Foam Control Agent | Ashland | Drewplus™ TS-4582 is a foam control agent for use in surface coatings and printing inks. This product is particularly recommended for use in high gloss coatings, flexographic printing inks and overprint varnishes. | |
Drewplus™ W-4510E Foam Control Agent | Ashland | Drewplus™ W-4510E is a 100% active foam control agent for use in coatings, printing inks and adhesives. Excellent results have been achieved in acrylic pressure sensitive adhesives. Drewplus™ W-4510E is a non-ionic proprietary formulation of wax derivativ...weiterlesen Drewplus™ W-4510E is a 100% active foam control agent for use in coatings, printing inks and adhesives. Excellent results have been achieved in acrylic pressure sensitive adhesives. Drewplus™ W-4510E is a non-ionic proprietary formulation of wax derivatives and mineral oil. verkürzen | |
ELFTEX® 320 | Cabot Corporation - Additives | ELFTEX® 320 is a low structure specialty carbon black pigment that is formulated to impart high gloss, blue undertone and moderate color strength for use in lithographic gloss inks. | |
EMPEROR® 1200 | Cabot Corporation - Additives | EMPEROR® 1200 carbon black provides excellent color performance and balance – enabling high jetness and blue undertone, good dispersion for ease-of-use and value for solvent-based coatings. | |
EMPEROR® 1600 | Cabot Corporation - Additives | EMPEROR® 1600 is a specialty carbon black that offers high-jetness, deep black color with a blue undertone and features superior processability for solvent-based coatings. This product is surface treated for ease-of-dispersion. | |
EMPEROR® 1800 | Cabot Corporation - Additives | EMPEROR® 1800 is a specialty carbon black offering high color and superior ease-of-use for water-based coatings. Formulating with EMPEROR® 1800 carbon black allows coatings manufacturers to achieve deep, jet black color while minimizing dispersants and di...weiterlesen EMPEROR® 1800 is a specialty carbon black offering high color and superior ease-of-use for water-based coatings. Formulating with EMPEROR® 1800 carbon black allows coatings manufacturers to achieve deep, jet black color while minimizing dispersants and dispersing time, resulting in lower overall formulation costs. verkürzen | |
EMPEROR® 2000 | Cabot Corporation - Additives | EMPEROR® 2000 is a high color specialty carbon black offering for water-based and polar solvent coatings formulations. It is designed for ease-of-dispersion and offers the highest jetness in our portfolio. | |
ENOVA® Aerogel IC3100 | Cabot Corporation - Additives | ENOVA® Aerogel IC3100 is a thermal insulation additive featuring ultra-low thermal conductivity, extreme shear resistance, complete hydrophobicity, and a smooth, even finish. This product is well suited for use in thin-film, thermally-insulative coating a...weiterlesen ENOVA® Aerogel IC3100 is a thermal insulation additive featuring ultra-low thermal conductivity, extreme shear resistance, complete hydrophobicity, and a smooth, even finish. This product is well suited for use in thin-film, thermally-insulative coating applications. verkürzen | |
ENOVA® Aerogel IC3110 | Cabot Corporation - Additives | ENOVA® Aerogel IC3110 is a thermal insulation additive featuring ultra-low thermal conductivity, exceptional insulation performance unaffected by shear, complete hydrophobicity, and a broad particle size distribution. This product is well suited for use i...weiterlesen ENOVA® Aerogel IC3110 is a thermal insulation additive featuring ultra-low thermal conductivity, exceptional insulation performance unaffected by shear, complete hydrophobicity, and a broad particle size distribution. This product is well suited for use in thermally-insulative coating applications. verkürzen | |
ENOVA® Aerogel IC3120 | Cabot Corporation - Additives | ENOVA® Aerogel IC3120 is a thermal insulation additive featuring ultra-low thermal conductivity, exceptional insulation performance unaffected by shear, complete hydrophobicity, and a broad particle size distribution. This product is well suited for use i...weiterlesen ENOVA® Aerogel IC3120 is a thermal insulation additive featuring ultra-low thermal conductivity, exceptional insulation performance unaffected by shear, complete hydrophobicity, and a broad particle size distribution. This product is well suited for use in thermally-insulative coating applications. verkürzen | |
ENOVA® Aerogel MT1100 | Cabot Corporation - Additives | ENOVA® Aerogel MT1100 is a hyprophobic silica that functions as a high performance matting additive. Featuring ultra-low gloss and viscosity build, resistance to settling, and good coating clarity, this product is well suited for use in high solids and UV...weiterlesen ENOVA® Aerogel MT1100 is a hyprophobic silica that functions as a high performance matting additive. Featuring ultra-low gloss and viscosity build, resistance to settling, and good coating clarity, this product is well suited for use in high solids and UV-curable coating applications. verkürzen | |
ENOVA® Aerogel MT1200 | Cabot Corporation - Additives | ENOVA® Aerogel MT1200 is a hyprophobic silica that functions as a high performance matting additive. Featuring ultra-low gloss and viscosity build, resistance to settling, and good coating clarity, this product is well suited for use in high solids and UV...weiterlesen ENOVA® Aerogel MT1200 is a hyprophobic silica that functions as a high performance matting additive. Featuring ultra-low gloss and viscosity build, resistance to settling, and good coating clarity, this product is well suited for use in high solids and UV-curable coating applications verkürzen | |
Jaypol™ AT1 | Ashland | Jaypol™ AT1 is an alkali soluble acrylic based associative thickener specifically designed for use in aqueous systems requiring a newtonian rheological behavior. It provides an excellent balance between high and low shear viscosities, and an excellent com...weiterlesen Jaypol™ AT1 is an alkali soluble acrylic based associative thickener specifically designed for use in aqueous systems requiring a newtonian rheological behavior. It provides an excellent balance between high and low shear viscosities, and an excellent compatibility with most organic and inorganic pigments and amongst other uses is particularly effective in silk and flat emulsion paints. verkürzen | |
Jaypol™ AT2 | Ashland | Jaypol™ AT2, when compared with Jaypol™ AT1, provides more in-can viscosity, and is thus recommended for use in interior and exterior flat dispersion paints, where it imparts excellent rheological balance between high and low shear viscosities with low do...weiterlesen Jaypol™ AT2, when compared with Jaypol™ AT1, provides more in-can viscosity, and is thus recommended for use in interior and exterior flat dispersion paints, where it imparts excellent rheological balance between high and low shear viscosities with low dosage. verkürzen | |
Jaypol™ AT4 | Ashland | Jaypol™ AT4 is an alkali swellable, acrylic-based, associative thickener which introduces high viscosity and thixotropy into water based paints and coatings. It imparts excellent film build whilst maintaining easy application properties. Furthermore, roll...weiterlesen Jaypol™ AT4 is an alkali swellable, acrylic-based, associative thickener which introduces high viscosity and thixotropy into water based paints and coatings. It imparts excellent film build whilst maintaining easy application properties. Furthermore, roller spatter is significantly reduced. verkürzen | |
KLUCEL™ Hydroxypropylcellulose, Industrial Grade | Ashland | KLUCEL™ Hydroxypropylcellulose, Industrial Grade is a nonionic water-soluble cellulose ether combining organic solvent solubility, themoplasticity and surface activity with the thickening and stabilizing properties of other water-soluble cellulose polymer...weiterlesen KLUCEL™ Hydroxypropylcellulose, Industrial Grade is a nonionic water-soluble cellulose ether combining organic solvent solubility, themoplasticity and surface activity with the thickening and stabilizing properties of other water-soluble cellulose polymers. verkürzen | |
Klucel™ MS Hydroxypropylcellulose | Ashland | Klucel™ MS is a grade of hydroxypropyl cellulose as a thickener and anti-sagging agent for inorganic zinc rich primers. This HPC technology enables a major improvement in dissolution speed in polar organic solvents, including methanol, isopropyl alcohol a...weiterlesen Klucel™ MS is a grade of hydroxypropyl cellulose as a thickener and anti-sagging agent for inorganic zinc rich primers. This HPC technology enables a major improvement in dissolution speed in polar organic solvents, including methanol, isopropyl alcohol and xylene. Furthermore, the thickening efficiency has significantly improved compared to conventional HPCs. verkürzen | |
KLUCEL™ PR Hydroxypropylcellulose | Ashland | KLUCEL™ PR Hydroxypropylcellulose is a a non-ionic water-soluble cellulosic polymer. It is recommended for use as a thickener in paint and varnish removers are KLUCEL™ PR is specially tested for solubility and viscosity development in methylene chloride/...weiterlesen KLUCEL™ PR Hydroxypropylcellulose is a a non-ionic water-soluble cellulosic polymer. It is recommended for use as a thickener in paint and varnish removers are KLUCEL™ PR is specially tested for solubility and viscosity development in methylene chloride/methanol mixtures. verkürzen | |
LUMIRA® Translucent Aerogel LA1000 | Cabot Corporation - Additives | LUMIRA® Translucent Aerogel LA1000 is a modified, synthetic, amorphous silica gel that functions as a high-performance thermal insulator. Featuring good hydrophobicity, UV stability, light transmission, and sound absorption, this product is well suited fo...weiterlesen LUMIRA® Translucent Aerogel LA1000 is a modified, synthetic, amorphous silica gel that functions as a high-performance thermal insulator. Featuring good hydrophobicity, UV stability, light transmission, and sound absorption, this product is well suited for use in glass and polycarbonate daylighting systems. verkürzen | |
LUMIRA® Translucent Aerogel LA2000 | Cabot Corporation - Additives | LUMIRA® Translucent Aerogel LA2000 is a modified, synthetic, amorphous silica gel that functions as a high-performance thermal insulator. Featuring good hydrophobicity, UV stability, light transmission, and sound absorption, this product is well suited fo...weiterlesen LUMIRA® Translucent Aerogel LA2000 is a modified, synthetic, amorphous silica gel that functions as a high-performance thermal insulator. Featuring good hydrophobicity, UV stability, light transmission, and sound absorption, this product is well suited for use in glass and polycarbonate daylighting systems. verkürzen | |
MOGUL® L | Cabot Corporation - Additives | MOGUL® L specialty carbon black is a low structure specialty black pigment that can impart high gloss and high jetness in printing inks, coatings and other applications. Ultimately, the dispersibility of MOGUL L specialty carbon black depends on the equip...weiterlesen MOGUL® L specialty carbon black is a low structure specialty black pigment that can impart high gloss and high jetness in printing inks, coatings and other applications. Ultimately, the dispersibility of MOGUL L specialty carbon black depends on the equipment used and the formulation. With its oxidized surface, it disperses more easily than other Cabot carbon blacks used in higher jetness applications. verkürzen | |
MONARCH® 1300 | Cabot Corporation - Additives | MONARCH® 1300 is a specialty carbon black pigment designed for liquid and powder coatings that require high color properties. It has high color strength and strong blue undertone characteristics in both solvent and aqueous systems. This product is well su...weiterlesen MONARCH® 1300 is a specialty carbon black pigment designed for liquid and powder coatings that require high color properties. It has high color strength and strong blue undertone characteristics in both solvent and aqueous systems. This product is well suited for use in automotive and industrial coatings. verkürzen | |
MONARCH® 1400 | Cabot Corporation - Additives | MONARCH® 1400 is a specialty carbon black pigment designed for liquid and powder coatings. It is applicable when high color properties are required. It has high color strength and strong undertone characteristics in solvent and aqueous systems. This prod...weiterlesen MONARCH® 1400 is a specialty carbon black pigment designed for liquid and powder coatings. It is applicable when high color properties are required. It has high color strength and strong undertone characteristics in solvent and aqueous systems. This product is well suited for use in automotive base coats, as well as plastic and rubber applications. verkürzen | |
MONARCH® 800 | Cabot Corporation - Additives | MONARCH® 800 is a specialty carbon black pigment featuring excellent jetness, a blue undertone, and good UV durability. This product is well suited for use in industrial and architectural coatings, as well as color dispersions for leather applications. | |
Natrosol™ 250 Hydroxyethylcellulose | Ashland | Natrosol™ 250 Hydroxyethylcellulose is a nonionic water-soluble cellulose ether. |