| Aquaflow™ NHS-300E | Ashland | Aquaflow™ NHS-300E is a solvent-free, nonionic synthetic associative thickener designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build an...weiterlesen Aquaflow™ NHS-300E is a solvent-free, nonionic synthetic associative thickener designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build and favorable brush drag. This product is compatible with acrylic, styrene-acrylic, vinyl-acrylic, and vinyl acetate ethylene (VAE) latexes, and can be used in interior and exterior paint formulations. verkürzen | |
| Aquaflow™ NHS-350E | Ashland | Aquaflow™ NHS-350E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development...weiterlesen Aquaflow™ NHS-350E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build and favorable brush drag. It is intended to be used in combination with a low-shear effective NSAT (KU driver) for the optimal balance of Stormer (KU) and ICI viscosity. verkürzen | |
| Aquaflow™ NHS-360 | Ashland | Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most modern latex resin systems and all sheens. This thickener provi...weiterlesen Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most modern latex resin systems and all sheens. This thickener provides highly efficient ICI viscosity development, excellent film build, optimal flow and leveling and favorable brush drag. verkürzen | |
| Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 is a nonionic associative polymer solution designed to increase Stormer consistency and provide superior flow and leveling in waterborne paints and coatings. | |
| Aquaflow™ NLS-220E | Ashland | Aquaflow™ NLS-220E is a nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. This thickener is solvent free and is supplied as a low-viscosity liquid for eas...weiterlesen Aquaflow™ NLS-220E is a nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. This thickener is solvent free and is supplied as a low-viscosity liquid for easy transfer and incorporation. It significantly reduces or eliminates latex agglomeration in paints containing vinyl-acrylic and vinyl acetate-ethylene latexes. verkürzen | |
| Aquaflow™ NMS-450E | Ashland | Aquaflow™ NMS-450E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all sheen levels. This product is designed to provide a b...weiterlesen Aquaflow™ NMS-450E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all sheen levels. This product is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as as the sole thickener in paint formulations based on hydrophobic resins, such as acrylics and styrene acrylics. verkürzen | |
| Aquaflow™ NMS-460E | Ashland | Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of S...weiterlesen Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as the sole thickener in many paint formulation based on hydrophobic resins, such as acrylics and styrene acrylics. With more hydrophilic resins, such as vinyl acetate ethylene (VAE), optimized rheology may be achieved with Aquaflow™ NMS-460E rheology modifier alone or in combination with a supplemental KU driver. verkürzen | |
| Aquaflow™ XLS-500E | Ashland | Aquaflow™ XLS-500E is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is highly effective with 100% acrylic and styrene-acrylic resin systems. This product provides an exceptional balance of l...weiterlesen Aquaflow™ XLS-500E is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is highly effective with 100% acrylic and styrene-acrylic resin systems. This product provides an exceptional balance of leveling and sag resistance when used in combination with a high shear effective NSAT. The optimized rheology modifier package will deliver superior leveling and sag resistance resulting in virtually drip-free application. verkürzen | |
| Aquaflow™ XLS-525E | Ashland | Aquaflow™ XLS-525E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is effective with most latex systems. This product provides an exceptional balance of leveling and sag r...weiterlesen Aquaflow™ XLS-525E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is effective with most latex systems. This product provides an exceptional balance of leveling and sag resistance when used in combination with a high-shear effective NSAT. The optimized rheology modifier package will deliver superior leveling and sag resistance resulting in virtually drip-free application. verkürzen | |
| Aquaflow™ XLS-530E | Ashland | Aquaflow™ XLS-530E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It imparts superior application properties including applied hiding, roller transfer and coverage. It impar...weiterlesen Aquaflow™ XLS-530E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It imparts superior application properties including applied hiding, roller transfer and coverage. It imparts a rich and creamy in-can feel and is effective with a wide range of latex chemistries, including styrene acrylic, acrylic, vinyl acrylic, and vinyl acetate ethylene (VAE). verkürzen | |
| AW 300 | AB Chimica srl | AW 300, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 68% of pigment type titanium dioxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high ...weiterlesen AW 300, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 68% of pigment type titanium dioxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 300 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. verkürzen | |
| AW 304 | AB Chimica srl | AW 304, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type of blue beta copper phthalocyanine NCNF. The AW 300 series is regarded as a non-yellowing acrylic resin that is ve...weiterlesen AW 304, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type of blue beta copper phthalocyanine NCNF. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 304 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. verkürzen | |
| AW 305 | AB Chimica srl | AW 305, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 44% of pigment type of transparent red iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resista...weiterlesen AW 305, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 44% of pigment type of transparent red iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 305 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. verkürzen | |
| AW 307 | AB Chimica srl | AW 307, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 55% of pigment type yellow iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high...weiterlesen AW 307, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 55% of pigment type yellow iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 307 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. verkürzen | |
| AW 308 | AB Chimica srl | AW 308, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type of azoic red P.R. 112. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with ...weiterlesen AW 308, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type of azoic red P.R. 112. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 308 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. verkürzen | |
| AW 312 | AB Chimica srl | AW 312, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 60% of pigment type red iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high we...weiterlesen AW 312, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 60% of pigment type red iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 312 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. verkürzen | |
| AW 320 | AB Chimica srl | AW 320, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 45% of pigment type of arylamide yellow. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with hi...weiterlesen AW 320, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 45% of pigment type of arylamide yellow. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 320 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. verkürzen | |
| AW 321 | AB Chimica srl | AW 321, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 45% of pigment type of dinitoaniline orange. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant wit...weiterlesen AW 321, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 45% of pigment type of dinitoaniline orange. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 321 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. verkürzen | |
| AW 336 | AB Chimica srl | AW 336, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type of green chlorinated copper phthalocyanine. The AW 300 series is regarded as a non-yellowing acrylic resin that is...weiterlesen AW 336, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type of green chlorinated copper phthalocyanine. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 336 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. verkürzen | |
| AW 341 | AB Chimica srl | AW 341, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 30% of pigment type of dioxazine violet. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with hi...weiterlesen AW 341, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 30% of pigment type of dioxazine violet. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 341 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. verkürzen | |
| AW 344 | AB Chimica srl | AW 344, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type transparent yellow iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resista...weiterlesen AW 344, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type transparent yellow iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 344 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. verkürzen | |
| AW 390B | AB Chimica srl | AW 390B, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 25% of pigment type of quinacridone magenta. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant wi...weiterlesen AW 390B, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 25% of pigment type of quinacridone magenta. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 390B is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. verkürzen | |
| AW 397 | AB Chimica srl | AW 397, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 35% of pigment type medium jetness black MCF. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant wi...weiterlesen AW 397, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 35% of pigment type medium jetness black MCF. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 397 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. verkürzen | |
| BLANOSE™ Refined CMC | Ashland | BLANOSE™ Refined CMC is a water soluble polymer that acts as a thickener, rheology control agent, binder, stabilizer, protective colloid, film former and water retention aid for use in a variety of industrial applications. Supplied in various viscosity ra...weiterlesen BLANOSE™ Refined CMC is a water soluble polymer that acts as a thickener, rheology control agent, binder, stabilizer, protective colloid, film former and water retention aid for use in a variety of industrial applications. Supplied in various viscosity ranges. verkürzen | |
| CO 500 | AB Chimica srl | CO 500, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 65% of pigment type titanium dioxide. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and ...weiterlesen CO 500, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 65% of pigment type titanium dioxide. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 500 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. verkürzen | |
| CO 504 | AB Chimica srl | CO 504, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 25% of pigment type blue beta copper phthalocyanine NCNF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resin...weiterlesen CO 504, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 25% of pigment type blue beta copper phthalocyanine NCNF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 504 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. verkürzen | |
| CO 506B | AB Chimica srl | CO 506B, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 70% of pigment type medium chrome yellow. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester,...weiterlesen CO 506B, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 70% of pigment type medium chrome yellow. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 506B can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. verkürzen | |
| CO 507 | AB Chimica srl | CO 507, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 50% of pigment type yellow iron oxide. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and...weiterlesen CO 507, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 50% of pigment type yellow iron oxide. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 507 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. verkürzen | |
| CO 508 | AB Chimica srl | CO 508, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 20% of pigment type manganese 2B toner. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, an...weiterlesen CO 508, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 20% of pigment type manganese 2B toner. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 508 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. verkürzen | |
| CO 511B | AB Chimica srl | CO 511B, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 65% of pigment type molybdate orange. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and...weiterlesen CO 511B, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 65% of pigment type molybdate orange. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 511B can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. verkürzen | |
| CO 512 | AB Chimica srl | CO 512, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 65% of pigment type red iron oxide. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and al...weiterlesen CO 512, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 65% of pigment type red iron oxide. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 512 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. verkürzen | |
| CO 513B | AB Chimica srl | CO 513B, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 65% of pigment type light chrome yellow. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, ...weiterlesen CO 513B, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 65% of pigment type light chrome yellow. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 513B can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. verkürzen | |
| CO 520 | AB Chimica srl | CO 520, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 20% of pigment type arylamide yellow. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and ...weiterlesen CO 520, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 20% of pigment type arylamide yellow. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 520 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. verkürzen | |
| CO 521 | AB Chimica srl | CO 521, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 33% of pigment type dinitroaniline orange. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester,...weiterlesen CO 521, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 33% of pigment type dinitroaniline orange. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 521 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. verkürzen | |
| CO 536 | AB Chimica srl | CO 536, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 20% of pigment type green chlorinated copper phthalocyanine. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard re...weiterlesen CO 536, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 20% of pigment type green chlorinated copper phthalocyanine. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 536 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. verkürzen | |
| CO 539 | AB Chimica srl | CO 539, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 10% of pigment type disazo yellow. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all...weiterlesen CO 539, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 10% of pigment type disazo yellow. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 539 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. verkürzen | |
| CO 541 | AB Chimica srl | CO 541, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 12% of pigment type dioxazine violet. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and ...weiterlesen CO 541, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 12% of pigment type dioxazine violet. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 541 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. verkürzen | |
| CO 545 | AB Chimica srl | CO 545, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 20% of pigment type quinacridone violet. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, a...weiterlesen CO 545, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 20% of pigment type quinacridone violet. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 545 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. verkürzen | |
| CO 547 | AB Chimica srl | CO 547, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 11% of pigment type red P.R. 23. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all o...weiterlesen CO 547, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 11% of pigment type red P.R. 23. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 547 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. verkürzen | |
| CO 551 | AB Chimica srl | CO 551, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 35% of pigment type benzimidazolone yellow. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester...weiterlesen CO 551, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 35% of pigment type benzimidazolone yellow. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 551 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. verkürzen | |
| CO 555 | AB Chimica srl | CO 555, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 35% of pigment type benzimidazolone orange. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester...weiterlesen CO 555, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 35% of pigment type benzimidazolone orange. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 555 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. verkürzen | |
| CO 556 | AB Chimica srl | CO 556, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 18% of pigment type blue alpha copper phthalocyanine NCNF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resi...weiterlesen CO 556, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 18% of pigment type blue alpha copper phthalocyanine NCNF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 556 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. verkürzen | |
| CO 557 | AB Chimica srl | CO 557, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 30% of pigment type DPP red. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil l...weiterlesen CO 557, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 30% of pigment type DPP red. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 557 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. verkürzen | |
| CO 560 | AB Chimica srl | CO 560, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 10% of pigment type special tinting black LCF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy es...weiterlesen CO 560, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 10% of pigment type special tinting black LCF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 560 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. verkürzen | |
| CO 590 | AB Chimica srl | CO 590, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 15% of pigment type quinacridone magenta. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, ...weiterlesen CO 590, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 15% of pigment type quinacridone magenta. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 590 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. verkürzen | |
| CO 597 | AB Chimica srl | CO 597, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 20% of pigment type medium jetness black MCF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy est...weiterlesen CO 597, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 20% of pigment type medium jetness black MCF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 597 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. verkürzen | |
| CO 597/1760 | AB Chimica srl | CO 597/1760, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 15% of pigment type medium jetness black MCF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epox...weiterlesen CO 597/1760, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 15% of pigment type medium jetness black MCF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 597/1760 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. verkürzen | |
| CO 598 | AB Chimica srl | CO 598, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 20% of pigment type tinting carbon black LCF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy est...weiterlesen CO 598, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 20% of pigment type tinting carbon black LCF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 598 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. verkürzen | |
| CO 599 | AB Chimica srl | CO 599, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 15% of pigment type high jetness black HCF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester...weiterlesen CO 599, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 15% of pigment type high jetness black HCF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 599 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. verkürzen | |
| CO 800 | AB Chimica srl | CO 800, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 65% of pigment type titanium dioxide. It is compatible with two-component urethanes, a...weiterlesen CO 800, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 65% of pigment type titanium dioxide. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. verkürzen | |
| CO 804 | AB Chimica srl | CO 804, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 25% of pigment type blue beta copper phthalocyanine NCNF. It is compatible with two-co...weiterlesen CO 804, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 25% of pigment type blue beta copper phthalocyanine NCNF. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. verkürzen | |
| CO 805 | AB Chimica srl | CO 805, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 35% of pigment type transparent red iron oxide. It is compatible with two-component ur...weiterlesen CO 805, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 35% of pigment type transparent red iron oxide. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. verkürzen | |
| CO 807 | AB Chimica srl | CO 807, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 60% of pigment type yellow iron oxide. It is compatible with two-component urethanes, ...weiterlesen CO 807, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 60% of pigment type yellow iron oxide. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. verkürzen | |
| CO 809 | AB Chimica srl | CO 809, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 20% of pigment type manganese 2B toner. It is compatible with two-component urethanes,...weiterlesen CO 809, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 20% of pigment type manganese 2B toner. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. verkürzen | |
| CO 812 | AB Chimica srl | CO 812, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 65% of pigment type red iron oxide. It is compatible with two-component urethanes, ami...weiterlesen CO 812, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 65% of pigment type red iron oxide. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. verkürzen | |
| CO 818 | AB Chimica srl | CO 818, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 50% of pigment type ultramarine blue. It is compatible with two-component urethanes, a...weiterlesen CO 818, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 50% of pigment type ultramarine blue. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. verkürzen | |
| CO 830 | AB Chimica srl | CO 830, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 30% of pigment type azoic yellow. It is compatible with two-component urethanes, amino...weiterlesen CO 830, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 30% of pigment type azoic yellow. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. verkürzen | |
| CO 831 | AB Chimica srl | CO 831, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 35% of pigment type benzimidazolone yellow. It is compatible with two-component uretha...weiterlesen CO 831, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 35% of pigment type benzimidazolone yellow. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. verkürzen | |
| CO 832 | AB Chimica srl | CO 832, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 25% of pigment type azoic orange. It is compatible with two-component urethanes, amino...weiterlesen CO 832, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 25% of pigment type azoic orange. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. verkürzen | |
| CO 837 | AB Chimica srl | CO 837, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 18% of pigment type green chlorinated copper phthalocyanine. It is compatible with two...weiterlesen CO 837, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 18% of pigment type green chlorinated copper phthalocyanine. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. verkürzen | |
| CO 839 | AB Chimica srl | CO 839, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 22% of pigment type disazo yellow. It is compatible with two-component urethanes, amin...weiterlesen CO 839, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 22% of pigment type disazo yellow. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. verkürzen | |
| CO 841 | AB Chimica srl | CO 841, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 10% of pigment type dioxazine violet. It is compatible with two-component urethanes, a...weiterlesen CO 841, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 10% of pigment type dioxazine violet. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. verkürzen | |
| CO 844 | AB Chimica srl | CO 844, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 35% of pigment type transparent yellow iron oxide. It is compatible with two-component...weiterlesen CO 844, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 35% of pigment type transparent yellow iron oxide. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. verkürzen | |
| CO 845 | AB Chimica srl | CO 845, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 20% of pigment type quinacridone violet. It is compatible with two-component urethanes...weiterlesen CO 845, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 20% of pigment type quinacridone violet. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. verkürzen | |
| CO 846 | AB Chimica srl | CO 846, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 30% of pigment type azoic red P.R. 170. It is compatible with two-component urethanes,...weiterlesen CO 846, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 30% of pigment type azoic red P.R. 170. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. verkürzen | |
| CO 851 | AB Chimica srl | CO 851, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 15% of pigment type carmine red. It is compatible with two-component urethanes, amino ...weiterlesen CO 851, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 15% of pigment type carmine red. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. verkürzen | |
| CO 854 | AB Chimica srl | CO 854, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 44% of pigment type isoindolinone yellow. It is compatible with two-component urethane...weiterlesen CO 854, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 44% of pigment type isoindolinone yellow. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. verkürzen | |
| CO 855 | AB Chimica srl | CO 855, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 40% of pigment type benzimidazolone orange. It is compatible with two-component uretha...weiterlesen CO 855, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 40% of pigment type benzimidazolone orange. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. verkürzen | |
| CO 856 | AB Chimica srl | CO 856, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 18% of pigment type blue apha copper phthalocyanine NCNF. It is compatible with two-co...weiterlesen CO 856, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 18% of pigment type blue apha copper phthalocyanine NCNF. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. verkürzen | |
| CO 860 | AB Chimica srl | CO 860, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 10% of pigment type tinting black LCF. It is compatible with two-component urethanes, ...weiterlesen CO 860, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 10% of pigment type tinting black LCF. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. verkürzen | |
| CO 863 | AB Chimica srl | CO 863, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 45% of pigment type bismuth vanadate yellow. It is compatible with two-component ureth...weiterlesen CO 863, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 45% of pigment type bismuth vanadate yellow. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. verkürzen | |
| CO 890 | AB Chimica srl | CO 890, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 17% of pigment type quinacridone magenta. It is compatible with two-component urethane...weiterlesen CO 890, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 17% of pigment type quinacridone magenta. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. verkürzen | |
| CO 893B | AB Chimica srl | CO 893B, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 10% of pigment type high jetness black HCF. It is compatible with two-component ureth...weiterlesen CO 893B, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 10% of pigment type high jetness black HCF. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. verkürzen | |
| CO 897 | AB Chimica srl | CO 897, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 20% of pigment type medium jetness black MCF. It is compatible with two-component uret...weiterlesen CO 897, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 20% of pigment type medium jetness black MCF. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. verkürzen | |
| CO 899 | AB Chimica srl | CO 899, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 10% of pigment type high jetness black HCF. It is compatible with two-component uretha...weiterlesen CO 899, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 10% of pigment type high jetness black HCF. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. verkürzen | |
| Culminal™ C-types modified cellulose ethers | Ashland | Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plas...weiterlesen Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plasters, fillers, adhesives and spackling compounds, cement and lime based plasters, tile cements and similar products. verkürzen | |
| Culminal™ CT methylhydroxyethylcellulose | Ashland | Culminal™ CT methylhydroxyethylcellulose are cellulose ethers that, when dissolved in water, offer a variety of functional properties. They are powders, which are used as rheology modifiers, stabilizers, and water-retention agents in emulsion paints. | |
| CULMINAL™ Methylcellulose Derivatives | Ashland | CULMINAL™ Methylcellulose Derivatives are cellulose ethers that, when dissolved in water, offer a variety of functional properties. Culminal products are powders, they are used as thickeners, protective colloids, stabilizers, susp ending aids and water-re...weiterlesen CULMINAL™ Methylcellulose Derivatives are cellulose ethers that, when dissolved in water, offer a variety of functional properties. Culminal products are powders, they are used as thickeners, protective colloids, stabilizers, susp ending aids and water-retention agents in many industrial applications. verkürzen | |
| Dextrol™ OC-180 | Ashland | Dextrol™ OC-180 is the neutralized (potassium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. | |
| Dextrol™ OC-180HS Phosphate Ester Surfactant | Ashland | Dextrol™ OC-180HS surfactant is the neutralized (sodium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. Depending on the formulation specifics, this p...weiterlesen Dextrol™ OC-180HS surfactant is the neutralized (sodium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. Depending on the formulation specifics, this product can also function as a supplemental dispersant to assist in reduction of pigment flocculation. In addition to use in latex paint, Dextrol™ OC-180HS surfactant provides benefits in universal colorants, to help disperse and stabilize the pigments, thereby enhancing color acceptance of water-based paints. verkürzen | |
| Dextrol™ OC-60 | Ashland | Dextrol™ OC-60 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-6025 | Ashland | Dextrol™ OC-6025 is a ammonium hydroxide salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
| Dextrol™ OC-60EP | Ashland | Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...weiterlesen Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-60EP surfactant can be neutralized using several organic or inorganic bases. Dextrol OC-60EP surfactant also imparts improved gloss and color acceptance in waterborne latex paints. verkürzen | |
| Dextrol™ OC-70 | Ashland | Dextrol™ OC-70 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-70EP | Ashland | Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...weiterlesen Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-70EP phosphate ester surfactant can be neutralized by the user using a number of organic or inorganic bases. verkürzen | |
| Dextrol™ OC-7525 | Ashland | Dextrol™ OC-7525 is a ammonium hydroxide salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
| Drew™ 210-694 | Ashland | Drew™ 210-694 is a foam control agent for use in coatings and printing inks. This product is particularly recommended for acrylate-based wood lacquers. Excellent results have also been obtained in acrylate-alkyd hybrid based industrial wood coatings. Drew...weiterlesen Drew™ 210-694 is a foam control agent for use in coatings and printing inks. This product is particularly recommended for acrylate-based wood lacquers. Excellent results have also been obtained in acrylate-alkyd hybrid based industrial wood coatings. Drew™ 210-694 is a highly efficient foam control agent with excellent persistency. verkürzen | |
| Drew™ 210-862 | Ashland | Drew™ 210-862 is a highly active foam control agent. It has been developed for use in water based coating systems that require a high level of (micro-) foam control under sever application conditions. Due to the high purity of the components used for form...weiterlesen Drew™ 210-862 is a highly active foam control agent. It has been developed for use in water based coating systems that require a high level of (micro-) foam control under sever application conditions. Due to the high purity of the components used for formulating Drew™ 210-862, this agent is also suitable for use in coating systems that require a high level of compliance with regards to food contact. verkürzen | |
| Drew™ 210-886 | Ashland | Drew™ 210-886 is a foam control agent, especially designed for use in surface coatings, overprint varnishes and the synthesis of polymer emulsions. Due to its high ease of incorporation, it has proven particularly suitable for low viscous coating systems ...weiterlesen Drew™ 210-886 is a foam control agent, especially designed for use in surface coatings, overprint varnishes and the synthesis of polymer emulsions. Due to its high ease of incorporation, it has proven particularly suitable for low viscous coating systems such as sealers and topcoats applied by flowcoat, dip, curtain coating or roller and brush. At elevated dosage levels, Drew™ 210-886 exhibits excellent performance in spray or airless spray applied high build topcoats. verkürzen | |
| Drew™ 210-903 | Ashland | Drew™ 210-903 is a 100% active product based on alcohols and polyols and is for use at temperatures about 55° C in application such as PVC synthesis and monomer stripping. At temperatures below 50° C, Drew™ 210-903 does not have any foam suppressing activ...weiterlesen Drew™ 210-903 is a 100% active product based on alcohols and polyols and is for use at temperatures about 55° C in application such as PVC synthesis and monomer stripping. At temperatures below 50° C, Drew™ 210-903 does not have any foam suppressing activity. verkürzen | |
| Drewplus™ L-1311E Foam Control Agent | Ashland | Drewplus™ L-1311E is a foam control agent based on mineral-oil technology designed for architectural paints and coatings. It provides excellent long-term foam control persistency, and prevents air entraining as well as the formation of micro and macro foa...weiterlesen Drewplus™ L-1311E is a foam control agent based on mineral-oil technology designed for architectural paints and coatings. It provides excellent long-term foam control persistency, and prevents air entraining as well as the formation of micro and macro foam on the paint film surface. This product is designed for use in a wide range of water-based systems and is particularly suitable for emulsion paints and plasters. verkürzen | |
| Drewplus™ L-1513 Foam Control Agent | Ashland | Drewplus™ L-1513 is a 100% active foam control agent designed specifically for use in water-based paint systems. Drewplus™ L-1513 is a high efficiency, hydrocarbon oil-based antifoaming agent, and is formulated to control foam at any point during manufact...weiterlesen Drewplus™ L-1513 is a 100% active foam control agent designed specifically for use in water-based paint systems. Drewplus™ L-1513 is a high efficiency, hydrocarbon oil-based antifoaming agent, and is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. Drewplus™ L-1513 foam control agent is readily dispersible and has an outstanding long-term foam control persistency. verkürzen | |
| Drewplus™ L-1600 Foam Control Agent | Ashland | Drewplus™ L-1600 foam control agent is a 100% active, high-efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or...weiterlesen Drewplus™ L-1600 foam control agent is a 100% active, high-efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. Drewplus™ L-1600 foam control agent is dispersible in a water-based coating system and provides outstanding initial and long-term foam control. verkürzen | |
| Drewplus™ L-1700 Foam Control Agent | Ashland | Drewplus™ L-1700 Foam Control Agent is a 100% active, high efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or...weiterlesen Drewplus™ L-1700 Foam Control Agent is a 100% active, high efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. This product is dispersible in a water-based coating system and provides outstanding initial and long-term foam control. verkürzen | |
| Drewplus* L-3500 Foam Control Agent | Ashland | Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spr...weiterlesen Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spray, air mix or HVLP. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. verkürzen | |
| Drewplus™ L-3510 Foam Control Agent | Ashland | Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatib...weiterlesen Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. verkürzen | |
| Drewplus™ S-4273 Foam Control Agent | Ashland | Drewplus™ S-4273 Foam Control Agent is designed for use in surface coatings and printing inks. This product is recommended for foam control in industrial wood coatings, semi-gloss, high-gloss architectural paints and adhesives. Excellent results have also...weiterlesen Drewplus™ S-4273 Foam Control Agent is designed for use in surface coatings and printing inks. This product is recommended for foam control in industrial wood coatings, semi-gloss, high-gloss architectural paints and adhesives. Excellent results have also been achieved in flexographic printing inks and overprint varnishes. verkürzen | |
| Drewplus™ S-4287 | Ashland | Drewplus™ S-4287 (formerly known as DREW 210-793) is a foam control agent for use in water based coatings. It is particularly recommended for high-gloss decorative paints. Excellent results have also been obtained in parquet lacquers. It also provides exc...weiterlesen Drewplus™ S-4287 (formerly known as DREW 210-793) is a foam control agent for use in water based coatings. It is particularly recommended for high-gloss decorative paints. Excellent results have also been obtained in parquet lacquers. It also provides excellent deaeration properties in low viscous (airless) sprayable systems. Drewplus™ S-4287 exhibits a superb balance between activity and compatibility and is highly efficient. It is a product with zero V.O.C. verkürzen | |
| Drewplus™ S-4288 Foam Control Agent | Ashland | Drewplus™ S-4288 foam control agent is a non-ionic proprietary formulation of surface active agents, silicones. it is designed for use in water-based coatings. Drewplus™ S-4288 foam control agent is recommended for high-gloss decorative paints. Excellent ...weiterlesen Drewplus™ S-4288 foam control agent is a non-ionic proprietary formulation of surface active agents, silicones. it is designed for use in water-based coatings. Drewplus™ S-4288 foam control agent is recommended for high-gloss decorative paints. Excellent results have also been obtained in parquet lacquers. Drewplus™ S-4288 foam control agent provides excellent deaeration properties in low viscous (airless) sprayable systems. Drewplus™ S-4288 foam control agent exhibits a superb balance between activity and compatibility and is highly efficient. verkürzen | |
| Drewplus™ S-4374 Foam Control Agent | Ashland | Drewplus™ S-4374 foam control agent is especially designed for use in surface coatings, overprint varnishes and pigmented inks. The product has proven particularly suitable for use in industrial wood coatings, applied by flow coat, dip, curtain coating or...weiterlesen Drewplus™ S-4374 foam control agent is especially designed for use in surface coatings, overprint varnishes and pigmented inks. The product has proven particularly suitable for use in industrial wood coatings, applied by flow coat, dip, curtain coating or spray; and also exhibits excellent performance in brush or roller applied wood coating systems. Drewplus™ S-4374 foam control agent is a 40 percent active emulsion of surface active agents and hydrophobes in water. verkürzen |
