| ALCOPHOR® 827 | BASF Formulation Additives | Highly effective corrosion inhibitor, for waterborne and solvent borne systems. | |
| Aquaflow™ NHS-300E | Ashland | Aquaflow™ NHS-300E is a solvent-free, nonionic synthetic associative thickener designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build an...weiterlesen Aquaflow™ NHS-300E is a solvent-free, nonionic synthetic associative thickener designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build and favorable brush drag. This product is compatible with acrylic, styrene-acrylic, vinyl-acrylic, and vinyl acetate ethylene (VAE) latexes, and can be used in interior and exterior paint formulations. verkürzen | |
| Aquaflow™ NHS-350E | Ashland | Aquaflow™ NHS-350E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development...weiterlesen Aquaflow™ NHS-350E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build and favorable brush drag. It is intended to be used in combination with a low-shear effective NSAT (KU driver) for the optimal balance of Stormer (KU) and ICI viscosity. verkürzen | |
| Aquaflow™ NHS-360 | Ashland | Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most modern latex resin systems and all sheens. This thickener provi...weiterlesen Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most modern latex resin systems and all sheens. This thickener provides highly efficient ICI viscosity development, excellent film build, optimal flow and leveling and favorable brush drag. verkürzen | |
| Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 is a nonionic associative polymer solution designed to increase Stormer consistency and provide superior flow and leveling in waterborne paints and coatings. | |
| Aquaflow™ NLS-220E | Ashland | Aquaflow™ NLS-220E is a nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. This thickener is solvent free and is supplied as a low-viscosity liquid for eas...weiterlesen Aquaflow™ NLS-220E is a nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. This thickener is solvent free and is supplied as a low-viscosity liquid for easy transfer and incorporation. It significantly reduces or eliminates latex agglomeration in paints containing vinyl-acrylic and vinyl acetate-ethylene latexes. verkürzen | |
| Aquaflow™ NMS-450E | Ashland | Aquaflow™ NMS-450E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all sheen levels. This product is designed to provide a b...weiterlesen Aquaflow™ NMS-450E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all sheen levels. This product is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as as the sole thickener in paint formulations based on hydrophobic resins, such as acrylics and styrene acrylics. verkürzen | |
| Aquaflow™ NMS-460E | Ashland | Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of S...weiterlesen Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as the sole thickener in many paint formulation based on hydrophobic resins, such as acrylics and styrene acrylics. With more hydrophilic resins, such as vinyl acetate ethylene (VAE), optimized rheology may be achieved with Aquaflow™ NMS-460E rheology modifier alone or in combination with a supplemental KU driver. verkürzen | |
| Aquaflow™ XLS-500E | Ashland | Aquaflow™ XLS-500E is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is highly effective with 100% acrylic and styrene-acrylic resin systems. This product provides an exceptional balance of l...weiterlesen Aquaflow™ XLS-500E is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is highly effective with 100% acrylic and styrene-acrylic resin systems. This product provides an exceptional balance of leveling and sag resistance when used in combination with a high shear effective NSAT. The optimized rheology modifier package will deliver superior leveling and sag resistance resulting in virtually drip-free application. verkürzen | |
| Aquaflow™ XLS-525E | Ashland | Aquaflow™ XLS-525E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is effective with most latex systems. This product provides an exceptional balance of leveling and sag r...weiterlesen Aquaflow™ XLS-525E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is effective with most latex systems. This product provides an exceptional balance of leveling and sag resistance when used in combination with a high-shear effective NSAT. The optimized rheology modifier package will deliver superior leveling and sag resistance resulting in virtually drip-free application. verkürzen | |
| Aquaflow™ XLS-530E | Ashland | Aquaflow™ XLS-530E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It imparts superior application properties including applied hiding, roller transfer and coverage. It impar...weiterlesen Aquaflow™ XLS-530E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It imparts superior application properties including applied hiding, roller transfer and coverage. It imparts a rich and creamy in-can feel and is effective with a wide range of latex chemistries, including styrene acrylic, acrylic, vinyl acrylic, and vinyl acetate ethylene (VAE). verkürzen | |
| BLANOSE™ Refined CMC | Ashland | BLANOSE™ Refined CMC is a water soluble polymer that acts as a thickener, rheology control agent, binder, stabilizer, protective colloid, film former and water retention aid for use in a variety of industrial applications. Supplied in various viscosity ra...weiterlesen BLANOSE™ Refined CMC is a water soluble polymer that acts as a thickener, rheology control agent, binder, stabilizer, protective colloid, film former and water retention aid for use in a variety of industrial applications. Supplied in various viscosity ranges. verkürzen | |
| Culminal™ C-types modified cellulose ethers | Ashland | Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plas...weiterlesen Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plasters, fillers, adhesives and spackling compounds, cement and lime based plasters, tile cements and similar products. verkürzen | |
| Culminal™ CT methylhydroxyethylcellulose | Ashland | Culminal™ CT methylhydroxyethylcellulose are cellulose ethers that, when dissolved in water, offer a variety of functional properties. They are powders, which are used as rheology modifiers, stabilizers, and water-retention agents in emulsion paints. | |
| CULMINAL™ Methylcellulose Derivatives | Ashland | CULMINAL™ Methylcellulose Derivatives are cellulose ethers that, when dissolved in water, offer a variety of functional properties. Culminal products are powders, they are used as thickeners, protective colloids, stabilizers, susp ending aids and water-re...weiterlesen CULMINAL™ Methylcellulose Derivatives are cellulose ethers that, when dissolved in water, offer a variety of functional properties. Culminal products are powders, they are used as thickeners, protective colloids, stabilizers, susp ending aids and water-retention agents in many industrial applications. verkürzen | |
| DEHYDRAN® 150 | BASF Formulation Additives | A defoamer for aqueous systems based on polymer dispersions and resin emulsions. | |
| DEHYSOL® 190 | BASF Formulation Additives | Ester of an aliphatic monocarboxylic acid used as plasticizer for plastisols. | |
| Dehysol® 344 | BASF Formulation Additives | Dehysol® 344 is a highly viscous migration-resistant plasticizer for PVC plastics, coatings, including cellophane and aluminium coatings, printing inks and related applications. This product is insoluble in water; it is, however, miscible in all proportio...weiterlesen Dehysol® 344 is a highly viscous migration-resistant plasticizer for PVC plastics, coatings, including cellophane and aluminium coatings, printing inks and related applications. This product is insoluble in water; it is, however, miscible in all proportions with almost all aliphatic, cycloaliphatic and aromatic hydrocarbons normally used in the processing of plastics and surface coating resins. It is a light yellow liquid dimethyl cyclohexyl phthalate. verkürzen | |
| Dehysol® D 81 | BASF Formulation Additives | Dehysol® D 81 is the standard type of an epoxy plasticizer. It has a good stabilizing effect and is largely extraction-resistant to cleaning materials and many industrial agents. Its migration resistance (also to polystyrene) is comparable with those of p...weiterlesen Dehysol® D 81 is the standard type of an epoxy plasticizer. It has a good stabilizing effect and is largely extraction-resistant to cleaning materials and many industrial agents. Its migration resistance (also to polystyrene) is comparable with those of polymeric plasticizers. Dehysol® epoxy plasticizers form addition compounds with acids to give inert compounds, so that they can stabilize materials liable to split off acids which could form acidic degradation under the influence of heat and ultraviolet light. Naturally they do not prevent the splitting, merely the autocatalytic nature of the reaction. verkürzen | |
| Dehysol® D82 | BASF Formulation Additives | Dehysol® D82 is an epoxy plasticizer for the paint industry. This light yellow liquid is made from epoxidized soybean oil. It protects paints and plastics against the influence of heat, light and weather, and thereby improves whiteness and resistance to a...weiterlesen Dehysol® D82 is an epoxy plasticizer for the paint industry. This light yellow liquid is made from epoxidized soybean oil. It protects paints and plastics against the influence of heat, light and weather, and thereby improves whiteness and resistance to ageing. It is compatible with PVC, many other plastics, synthetic resins, plasticizers and gives transparent films. It can be hardened with acids, anhydrides, and amines. Moreover, it remains stable even at higher temperatures. verkürzen | |
| Dehysol® DBS | BASF Formulation Additives | Dehysol® is a universal, highly effective plasticizer. It is a very effective plasticizer for PVC being used generally together with a less volatile plasticizer such as DOP. Dehysol® DBS is insoluble in water, but soluble in most important lacquer solvent...weiterlesen Dehysol® is a universal, highly effective plasticizer. It is a very effective plasticizer for PVC being used generally together with a less volatile plasticizer such as DOP. Dehysol® DBS is insoluble in water, but soluble in most important lacquer solvents and miscible with commonly known plasticizers. This product is far less volatile than dibutyl phthalate, but does not achieve the low volatility of DOP. verkürzen | |
| DEHYSOL® DOA | BASF Formulation Additives | Plasticizer with good aging resistance. | |
| Dextrol™ OC-180 | Ashland | Dextrol™ OC-180 is the neutralized (potassium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. | |
| Dextrol™ OC-180HS Phosphate Ester Surfactant | Ashland | Dextrol™ OC-180HS surfactant is the neutralized (sodium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. Depending on the formulation specifics, this p...weiterlesen Dextrol™ OC-180HS surfactant is the neutralized (sodium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. Depending on the formulation specifics, this product can also function as a supplemental dispersant to assist in reduction of pigment flocculation. In addition to use in latex paint, Dextrol™ OC-180HS surfactant provides benefits in universal colorants, to help disperse and stabilize the pigments, thereby enhancing color acceptance of water-based paints. verkürzen | |
| Dextrol™ OC-60 | Ashland | Dextrol™ OC-60 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-6025 | Ashland | Dextrol™ OC-6025 is a ammonium hydroxide salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
| Dextrol™ OC-60EP | Ashland | Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...weiterlesen Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-60EP surfactant can be neutralized using several organic or inorganic bases. Dextrol OC-60EP surfactant also imparts improved gloss and color acceptance in waterborne latex paints. verkürzen | |
| Dextrol™ OC-70 | Ashland | Dextrol™ OC-70 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-70EP | Ashland | Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...weiterlesen Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-70EP phosphate ester surfactant can be neutralized by the user using a number of organic or inorganic bases. verkürzen | |
| Dextrol™ OC-7525 | Ashland | Dextrol™ OC-7525 is a ammonium hydroxide salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
| DISPONIL® A 4066 | BASF Formulation Additives | A non-ionic surfactant based on linear fatty alcohol ethoxylates. | |
| Drew™ 210-694 | Ashland | Drew™ 210-694 is a foam control agent for use in coatings and printing inks. This product is particularly recommended for acrylate-based wood lacquers. Excellent results have also been obtained in acrylate-alkyd hybrid based industrial wood coatings. Drew...weiterlesen Drew™ 210-694 is a foam control agent for use in coatings and printing inks. This product is particularly recommended for acrylate-based wood lacquers. Excellent results have also been obtained in acrylate-alkyd hybrid based industrial wood coatings. Drew™ 210-694 is a highly efficient foam control agent with excellent persistency. verkürzen | |
| Drew™ 210-862 | Ashland | Drew™ 210-862 is a highly active foam control agent. It has been developed for use in water based coating systems that require a high level of (micro-) foam control under sever application conditions. Due to the high purity of the components used for form...weiterlesen Drew™ 210-862 is a highly active foam control agent. It has been developed for use in water based coating systems that require a high level of (micro-) foam control under sever application conditions. Due to the high purity of the components used for formulating Drew™ 210-862, this agent is also suitable for use in coating systems that require a high level of compliance with regards to food contact. verkürzen | |
| Drew™ 210-886 | Ashland | Drew™ 210-886 is a foam control agent, especially designed for use in surface coatings, overprint varnishes and the synthesis of polymer emulsions. Due to its high ease of incorporation, it has proven particularly suitable for low viscous coating systems ...weiterlesen Drew™ 210-886 is a foam control agent, especially designed for use in surface coatings, overprint varnishes and the synthesis of polymer emulsions. Due to its high ease of incorporation, it has proven particularly suitable for low viscous coating systems such as sealers and topcoats applied by flowcoat, dip, curtain coating or roller and brush. At elevated dosage levels, Drew™ 210-886 exhibits excellent performance in spray or airless spray applied high build topcoats. verkürzen | |
| Drew™ 210-903 | Ashland | Drew™ 210-903 is a 100% active product based on alcohols and polyols and is for use at temperatures about 55° C in application such as PVC synthesis and monomer stripping. At temperatures below 50° C, Drew™ 210-903 does not have any foam suppressing activ...weiterlesen Drew™ 210-903 is a 100% active product based on alcohols and polyols and is for use at temperatures about 55° C in application such as PVC synthesis and monomer stripping. At temperatures below 50° C, Drew™ 210-903 does not have any foam suppressing activity. verkürzen | |
| Drewplus™ L-1311E Foam Control Agent | Ashland | Drewplus™ L-1311E is a foam control agent based on mineral-oil technology designed for architectural paints and coatings. It provides excellent long-term foam control persistency, and prevents air entraining as well as the formation of micro and macro foa...weiterlesen Drewplus™ L-1311E is a foam control agent based on mineral-oil technology designed for architectural paints and coatings. It provides excellent long-term foam control persistency, and prevents air entraining as well as the formation of micro and macro foam on the paint film surface. This product is designed for use in a wide range of water-based systems and is particularly suitable for emulsion paints and plasters. verkürzen | |
| Drewplus™ L-1513 Foam Control Agent | Ashland | Drewplus™ L-1513 is a 100% active foam control agent designed specifically for use in water-based paint systems. Drewplus™ L-1513 is a high efficiency, hydrocarbon oil-based antifoaming agent, and is formulated to control foam at any point during manufact...weiterlesen Drewplus™ L-1513 is a 100% active foam control agent designed specifically for use in water-based paint systems. Drewplus™ L-1513 is a high efficiency, hydrocarbon oil-based antifoaming agent, and is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. Drewplus™ L-1513 foam control agent is readily dispersible and has an outstanding long-term foam control persistency. verkürzen | |
| Drewplus™ L-1600 Foam Control Agent | Ashland | Drewplus™ L-1600 foam control agent is a 100% active, high-efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or...weiterlesen Drewplus™ L-1600 foam control agent is a 100% active, high-efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. Drewplus™ L-1600 foam control agent is dispersible in a water-based coating system and provides outstanding initial and long-term foam control. verkürzen | |
| Drewplus™ L-1700 Foam Control Agent | Ashland | Drewplus™ L-1700 Foam Control Agent is a 100% active, high efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or...weiterlesen Drewplus™ L-1700 Foam Control Agent is a 100% active, high efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. This product is dispersible in a water-based coating system and provides outstanding initial and long-term foam control. verkürzen | |
| Drewplus* L-3500 Foam Control Agent | Ashland | Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spr...weiterlesen Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spray, air mix or HVLP. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. verkürzen | |
| Drewplus™ L-3510 Foam Control Agent | Ashland | Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatib...weiterlesen Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. verkürzen | |
| Drewplus™ S-4273 Foam Control Agent | Ashland | Drewplus™ S-4273 Foam Control Agent is designed for use in surface coatings and printing inks. This product is recommended for foam control in industrial wood coatings, semi-gloss, high-gloss architectural paints and adhesives. Excellent results have also...weiterlesen Drewplus™ S-4273 Foam Control Agent is designed for use in surface coatings and printing inks. This product is recommended for foam control in industrial wood coatings, semi-gloss, high-gloss architectural paints and adhesives. Excellent results have also been achieved in flexographic printing inks and overprint varnishes. verkürzen | |
| Drewplus™ S-4287 | Ashland | Drewplus™ S-4287 (formerly known as DREW 210-793) is a foam control agent for use in water based coatings. It is particularly recommended for high-gloss decorative paints. Excellent results have also been obtained in parquet lacquers. It also provides exc...weiterlesen Drewplus™ S-4287 (formerly known as DREW 210-793) is a foam control agent for use in water based coatings. It is particularly recommended for high-gloss decorative paints. Excellent results have also been obtained in parquet lacquers. It also provides excellent deaeration properties in low viscous (airless) sprayable systems. Drewplus™ S-4287 exhibits a superb balance between activity and compatibility and is highly efficient. It is a product with zero V.O.C. verkürzen | |
| Drewplus™ S-4288 Foam Control Agent | Ashland | Drewplus™ S-4288 foam control agent is a non-ionic proprietary formulation of surface active agents, silicones. it is designed for use in water-based coatings. Drewplus™ S-4288 foam control agent is recommended for high-gloss decorative paints. Excellent ...weiterlesen Drewplus™ S-4288 foam control agent is a non-ionic proprietary formulation of surface active agents, silicones. it is designed for use in water-based coatings. Drewplus™ S-4288 foam control agent is recommended for high-gloss decorative paints. Excellent results have also been obtained in parquet lacquers. Drewplus™ S-4288 foam control agent provides excellent deaeration properties in low viscous (airless) sprayable systems. Drewplus™ S-4288 foam control agent exhibits a superb balance between activity and compatibility and is highly efficient. verkürzen | |
| Drewplus™ S-4374 Foam Control Agent | Ashland | Drewplus™ S-4374 foam control agent is especially designed for use in surface coatings, overprint varnishes and pigmented inks. The product has proven particularly suitable for use in industrial wood coatings, applied by flow coat, dip, curtain coating or...weiterlesen Drewplus™ S-4374 foam control agent is especially designed for use in surface coatings, overprint varnishes and pigmented inks. The product has proven particularly suitable for use in industrial wood coatings, applied by flow coat, dip, curtain coating or spray; and also exhibits excellent performance in brush or roller applied wood coating systems. Drewplus™ S-4374 foam control agent is a 40 percent active emulsion of surface active agents and hydrophobes in water. verkürzen | |
| Drewplus™ S-4386 Foam Control Agent | Ashland | Drewplus™ S-4386 Foam Control Agent is a non-ionic aqueous emulsion of silica derivatives, silicones, and surfactants. It is formulated for use in water-based coatings, printing inks, graphic arts, wood coatings and high-gloss decorative paints. It is a h...weiterlesen Drewplus™ S-4386 Foam Control Agent is a non-ionic aqueous emulsion of silica derivatives, silicones, and surfactants. It is formulated for use in water-based coatings, printing inks, graphic arts, wood coatings and high-gloss decorative paints. It is a highly efficient foam control agent with fast performance, excellent persistency and compatibility. verkürzen | |
| Drewplus™ S-4480 Foam Control Agent | Ashland | Drewplus™ S-4480 foam control agent is a non-ionic blend of silicones and paraffinic oil. It is formulated for use in water-based coatings, particularly in clear systems. It is a highly efficient foam control agent with fast performance, excellent persist...weiterlesen Drewplus™ S-4480 foam control agent is a non-ionic blend of silicones and paraffinic oil. It is formulated for use in water-based coatings, particularly in clear systems. It is a highly efficient foam control agent with fast performance, excellent persistence and compatibility. Since it functions as an air-release agent, it is particularly effective on microfoam in spray-applied coatings. verkürzen | |
| Drewplus™ T-1201 Foam Control Agent | Ashland | Drewplus™ T-1201 is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201 is particularly recommended for SBR and acrylic emulsions. It may be used both...weiterlesen Drewplus™ T-1201 is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201 is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of polymer emulsions. verkürzen | |
| Drewplus™ T-1201E Foam Control Agent | Ashland | Drewplus™ T-1201E is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201E is particularly recommended for SBR and acrylic emulsions. It may be used bo...weiterlesen Drewplus™ T-1201E is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201E is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of polymer emulsions. verkürzen | |
| Drewplus™ T-1202E Foam Control Agent | Ashland | Drewplus™ T-1202E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Because of its excellent compatibility, Drewplus™ T-1202E is particularly recommended for SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. | |
| Drewplus™ T-3200 Foam Control Agent | Ashland | Drewplus™ T-3200 is a foam control agent for use in coatings, emulsion polymerization processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-3200 is particularly recommended for SBR and acrylic emulsions. It may be...weiterlesen Drewplus™ T-3200 is a foam control agent for use in coatings, emulsion polymerization processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-3200 is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of emulsions. Drewplus™ T-3200 is a non-ionic proprietary formulation of silica derivatives, paraffinic oil and esters. verkürzen | |
| Drewplus™ T-3211 Foam Control Agent | Ashland | Drewplus™ T-3211 is a foam control agent for use in coatings, emulsion polymerisation processes and adhesives. Excellent results have been achieved in acrylic paper coatings and pressure sensitive adhesives. Drewplus™ T-3211exhibits excellent foam control...weiterlesen Drewplus™ T-3211 is a foam control agent for use in coatings, emulsion polymerisation processes and adhesives. Excellent results have been achieved in acrylic paper coatings and pressure sensitive adhesives. Drewplus™ T-3211exhibits excellent foam control whilst not causing problems with surface wetting. Drewplus™ T-3211 is a 100% active, non-ionic proprietary formulation of silica derivatives, paraffinic oil and esters. verkürzen | |
| Drewplus™ T-4201 Foam Control Agent | Ashland | Drewplus™ T-4201 is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsio...weiterlesen Drewplus™ T-4201 is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. Drewplus™ T-4201 foam control agent is a 100- percent active, non-ionic proprietary formulation of silica derivatives, mineral oil and esters. verkürzen | |
| Drewplus™ T-4201E Foam Control Agent | Ashland | Drewplus™ T-4201E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsi...weiterlesen Drewplus™ T-4201E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. Drewplus™ T-4201E foam control agent is a 100- percent active, non-ionic proprietary formulation of silica derivatives, mineral oil and esters. verkürzen | |
| Drewplus™ T-4202E Foam Control Agent | Ashland | Drewplus™ T-4202E is a foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. | |
| Drewplus™ T-4303 | Ashland | Drewplus™ T-4303 is a 100% active foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. Drewplus™ ...weiterlesen Drewplus™ T-4303 is a 100% active foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. Drewplus™ T-4303 is a non-ionic proprietary formulation of silica derivatives, mineral oil and esters. verkürzen | |
| Drewplus™ T-4500E Foam Control Agent | Ashland | Drewplus™ T-4500E is a foam control agent for use in coating and emulsion polymerization processes. It is particularly recommended for flat and semi-gloss decorative paints. | |
| Drewplus™ TS-2200 Foam Control Agent | Ashland | Drewplus™ TS-2200 is a foam control agent for use in coatings and emulsion polymerization processes. Because of its excellent compatibility, this product is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture...weiterlesen Drewplus™ TS-2200 is a foam control agent for use in coatings and emulsion polymerization processes. Because of its excellent compatibility, this product is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of emulsions. verkürzen | |
| Drewplus™ TS-4384 Foam Control Agent | Ashland | Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-glos...weiterlesen Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss acrylic architectural paints, water- based parquet lacquers. Excellent results have also been obtained in acrylic anti- corrosive primers, flexographic printing inks and water-reducible alkyd based systems. Drewplus™ TS-4384 foam control agent is highly efficient and exhibits excellent persistency. verkürzen | |
| Drewplus™ TS-4385 Foam Control Agent | Ashland | Drewplus™ TS-4385 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss architectural paints and parquet lacquers. Excellent results have also been obtained...weiterlesen Drewplus™ TS-4385 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss architectural paints and parquet lacquers. Excellent results have also been obtained in acrylic anti-corrosive primers, flexographic printing inks and water-reducible alkyd based systems. This product is highly efficient and exhibits excellent persistence. verkürzen | |
| Drewplus™ TS-4387 Foam Control Agent | Ashland | Drewplus™ TS-4387 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for flexographic printing inks, overprint varnishes and wood lacquers. | |
| Drewplus™ TS-4481 Foam Control Agent | Ashland | Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and c...weiterlesen Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and compatibility. Since it functions as an air release agent it is particularly effective on microfoam in spray-applied industrial coatings. verkürzen | |
| Drewplus™ TS-4582 Foam Control Agent | Ashland | Drewplus™ TS-4582 is a foam control agent for use in surface coatings and printing inks. This product is particularly recommended for use in high gloss coatings, flexographic printing inks and overprint varnishes. | |
| Drewplus™ W-4510E Foam Control Agent | Ashland | Drewplus™ W-4510E is a 100% active foam control agent for use in coatings, printing inks and adhesives. Excellent results have been achieved in acrylic pressure sensitive adhesives. Drewplus™ W-4510E is a non-ionic proprietary formulation of wax derivativ...weiterlesen Drewplus™ W-4510E is a 100% active foam control agent for use in coatings, printing inks and adhesives. Excellent results have been achieved in acrylic pressure sensitive adhesives. Drewplus™ W-4510E is a non-ionic proprietary formulation of wax derivatives and mineral oil. verkürzen | |
| DSX® 1516 | BASF Formulation Additives | DSX® 1516 is a non-ionic medium pseudoplastic rheology modifier for water-based coatings. It gives pseudoplastic behavior to aqueous systems. It is film-building and shows good affinity to pigments. Thickening is independent of the pH. This product is sui...weiterlesen DSX® 1516 is a non-ionic medium pseudoplastic rheology modifier for water-based coatings. It gives pseudoplastic behavior to aqueous systems. It is film-building and shows good affinity to pigments. Thickening is independent of the pH. This product is suitable for the thickening and modification of the flow properties of water-based polymers (e.g., acrylic copolymers, vinyl acetate homopolymers, acrylic polymers, PVAc-VC copolymers, polyurethanes, amine-neutralized and emulsified systems) as well as for products based on polymeric binders such as emulsion paints, texture finishes, high-gloss emulsions paints, water-based putties, adhesives and corrosion primers. verkürzen | |
| DSX® 1550 | BASF Formulation Additives | DSX® 1550 is a non-ionic rheology modifier for waterborne coatings that provides structural viscosity. It is a polyurethane polymer in water/butoxydiglycol. This yellowish, white hazy liquid is suitable for thickening and modification of flow properties o...weiterlesen DSX® 1550 is a non-ionic rheology modifier for waterborne coatings that provides structural viscosity. It is a polyurethane polymer in water/butoxydiglycol. This yellowish, white hazy liquid is suitable for thickening and modification of flow properties of waterborne polymers and other aqueous systems as well as for finished products like coatings and putties. These properties can be achieved in all kind of emulsions based on e.g. acrylic copolymer, vinyl acetate homopolymer, acrylic polymers, PVAc-VC copolymers, polyurethanes, amine neutralized and emulsified systems. verkürzen | |
| Efka® 2020 | BASF Formulation Additives | Efka® 2020 is a clear, slightly yellowish liquid that accelerates defoaming in solvent-based coatings. It therefore eliminates foaming and blistering, regardless of whether the air bubbles are caused by the substrate, e.g. wood or paper or as a result of ...weiterlesen Efka® 2020 is a clear, slightly yellowish liquid that accelerates defoaming in solvent-based coatings. It therefore eliminates foaming and blistering, regardless of whether the air bubbles are caused by the substrate, e.g. wood or paper or as a result of pumping, rolling, flooding or airless spraying. verkürzen | |
| Efka® 2038 N | BASF Formulation Additives | Efka® 2038 N is a silicone-based defoamer for solvent-based coatings. It has a physical form of clear, colorless liquid. Efka® 2038 N prevents the formation of foam and blisters during the manufacturing and application of solvent-based wood finishes. It h...weiterlesen Efka® 2038 N is a silicone-based defoamer for solvent-based coatings. It has a physical form of clear, colorless liquid. Efka® 2038 N prevents the formation of foam and blisters during the manufacturing and application of solvent-based wood finishes. It has very good compatibility properties which make it extremely suitable for use in clear coatings. Recommended applications include polyurethane coatings, unsaturated polyester systems, acid-curable coatings, and NC lacquers. verkürzen | |
| Efka® 2040 | BASF Formulation Additives | Efka® 2040 is a silicone-based defoamer for solvent-based coatings. It prevents the formation of foam and blisters during manufacturing and application. It is also suitable for airless spray, brush, and roller applications. Efka® 2040 is a solution of def...weiterlesen Efka® 2040 is a silicone-based defoamer for solvent-based coatings. It prevents the formation of foam and blisters during manufacturing and application. It is also suitable for airless spray, brush, and roller applications. Efka® 2040 is a solution of defoaming substances containing silicone. verkürzen | |
| Efka® 2526 | BASF Formulation Additives | Efka® 2526 is a defoamer in various water-based coating systems. It functions well during the application of paints and lacquers and also prevents the entrapment of air during processing steps such as stirring, pumping etc. Efka® 2526 was developed for w...weiterlesen Efka® 2526 is a defoamer in various water-based coating systems. It functions well during the application of paints and lacquers and also prevents the entrapment of air during processing steps such as stirring, pumping etc. Efka® 2526 was developed for water-based industrial coatings. It is recommended for use in coatings based on alkyd resin solutions and alkyd resin emulsions. verkürzen | |
| Efka® 2550 | BASF Formulation Additives | Efka® 2550 can be used as a defoamer in various water-based coating systems and pigment concentrates. Due to its stability in high shear processing it functions well during the application of paints and lacquers. Due to its stability to high-shear process...weiterlesen Efka® 2550 can be used as a defoamer in various water-based coating systems and pigment concentrates. Due to its stability in high shear processing it functions well during the application of paints and lacquers. Due to its stability to high-shear processing it functions well during the application of paints and lacquers and also prevents the entrapment of air during processing steps such as stirring, pumping etc. verkürzen | |
| Efka® 2580 | BASF Formulation Additives | Efka® 2580 is a colorless liquid designed to be used as a defoamer in water-based coating systems and pigment concentrates. One of the unique properties of this family of defoamers is the ease of incorporation under low-shear conditions without causing ne...weiterlesen Efka® 2580 is a colorless liquid designed to be used as a defoamer in water-based coating systems and pigment concentrates. One of the unique properties of this family of defoamers is the ease of incorporation under low-shear conditions without causing negative side effects in the final paint film. Another strong property is the high-shear stability of these defoamers, which makes them extremely suitable to be used in high-shear processing such as grinding, stirring and pumping. verkürzen | |
| Efka® 2720 | BASF Formulation Additives | Efka® 2720 supports the quick de-aeration of thermosetting resin systems. It can be used in pigmented or non-pigmented resin systems such as: unsaturated polyesters, 2-pack epoxies, and PVC-compounds. | |
| Efka® 3030 | BASF Formulation Additives | Efka® 3030 is an additive designed to improve leveling and to increase scratch and abrasion resistance. It improves anti-blocking characteristics, prevents floating and is universally compatible with various coating systems. Compared to dimethylpolysiloxa...weiterlesen Efka® 3030 is an additive designed to improve leveling and to increase scratch and abrasion resistance. It improves anti-blocking characteristics, prevents floating and is universally compatible with various coating systems. Compared to dimethylpolysiloxane, this slip & leveling agent is universally compatible with various coating systems and does not cause cratering even in excessively high concentrations. verkürzen | |
| Efka® 3236 | BASF Formulation Additives | Efka® 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray acceptan...weiterlesen Efka® 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray acceptance. Efka® 3236 is particularly recommended for non-aqueous coatings such as baking enamels based on alkyd, acrylic or polyester resins, acid-curable or polyurethane wood finishes particularly when applied by curtain coating, self-leveling epoxy flooring compounds, UV-curable paper lacquers and air-drying alkyd systems. verkürzen | |
| Efka® 3277 | BASF Formulation Additives | Efka® 3277 is a fluorocarbon-modified polymer that improves leveling and prevents cratering. It also helps substrate wetting and acts as a defoamer and de-aeration aid. Efka® 3277 is particularly suited for: baking enamels based on alkyd, acrylic or polye...weiterlesen Efka® 3277 is a fluorocarbon-modified polymer that improves leveling and prevents cratering. It also helps substrate wetting and acts as a defoamer and de-aeration aid. Efka® 3277 is particularly suited for: baking enamels based on alkyd, acrylic or polyester resins, polyurethane coatings, two-pack epoxy compounds, and air-drying alkyd systems. verkürzen | |
| Efka® 3570 | BASF Formulation Additives | Efka® 3570 is a fluorcarbon modified polyacrylate neutralized with DMEA and dissolved in water. The use of Efka® 3570 gives the following advantages: excellent anti-cratering behavior, better substrate wetting, improved leveling, and no intercoat adhesion...weiterlesen Efka® 3570 is a fluorcarbon modified polyacrylate neutralized with DMEA and dissolved in water. The use of Efka® 3570 gives the following advantages: excellent anti-cratering behavior, better substrate wetting, improved leveling, and no intercoat adhesion problems. This slightly hazy, yellowish liquid is recommended for use in all kinds of water-based coatings with a pH value > 7.6. verkürzen | |
| Efka® 3600 N | BASF Formulation Additives | Efka® 3600 N reduces the surface tension of organic coating systems. This and good compatibility make it a very effective anti-cratering and flow control agent. It has a physical form of a slightly yellowish liquid. Efka® 3600 N is especially suitable fo...weiterlesen Efka® 3600 N reduces the surface tension of organic coating systems. This and good compatibility make it a very effective anti-cratering and flow control agent. It has a physical form of a slightly yellowish liquid. Efka® 3600 N is especially suitable for baking enamels based on alkyd, acrylic or polyester resins, polyurethane coatings, two-pack epoxy coatings, and air-drying alkyd systems. verkürzen | |
| Efka® 3650 N | BASF Formulation Additives | Efka® 3650 N reduces the surface tension of organic coating systems. This and good compatibility make it a very effective anti-cratering and flow control agent. It has the physical form of lightly yellowish liquid. Efka® 3650 N is especially suitable fo...weiterlesen Efka® 3650 N reduces the surface tension of organic coating systems. This and good compatibility make it a very effective anti-cratering and flow control agent. It has the physical form of lightly yellowish liquid. Efka® 3650 N is especially suitable for baking enamels based on alkyd, acrylic or polyester resins, polyurethane coatings, two-pack epoxy coatings, and air-drying alkyd systems. verkürzen | |
| Efka® 3772 N | BASF Formulation Additives | Efka® 3772 N is a slip and leveling agent for use in aqueous coating systems. It needs to be neutral-ized with ammonia or triethanolamine. Complete water solubility is achieved with 9% triethanolamine or 12% of a 25% ammonia solution. It improves levelin...weiterlesen Efka® 3772 N is a slip and leveling agent for use in aqueous coating systems. It needs to be neutral-ized with ammonia or triethanolamine. Complete water solubility is achieved with 9% triethanolamine or 12% of a 25% ammonia solution. It improves leveling, prevents cratering and orange peel, helps substrate wetting, acts as a defoamer, and improves adhesion. Efka® 3772 N has a physical form of clear, colorless liquid. It can be used in water-based air-drying and baking enamels as well as in solvent-based industrial paints. verkürzen | |
| Efka® 3777 N | BASF Formulation Additives | Efka® 3777 N is a fluorocarbon-modified polymer used as a slip and leveling agent. It improves leveling, prevents cratering, helps substrate wetting acts as a defoamer and de-aeration aid, and does not interfere with intercoat adhesion. | |
| Efka® 4403 N | BASF Formulation Additives | Efka® 4403 N is a polymeric dispersant for stabilizing inorganic and organic pigments. Efka® 4403 N is mainly used for co-grinding of all kinds of pigment blends in solvent-based coatings as well as in gel coats. | |
| Efka® 4560 | BASF Formulation Additives | Efka® 4560 is a modified polyacrylate that is pH-independent and has a wide-spread compatibility in most commonly used waterborne decorative coatings. It provides improved gloss, color strength, flocculation stability and anti-flooding behavior. Efka® 456...weiterlesen Efka® 4560 is a modified polyacrylate that is pH-independent and has a wide-spread compatibility in most commonly used waterborne decorative coatings. It provides improved gloss, color strength, flocculation stability and anti-flooding behavior. Efka® 4560 is, in combination with Efka® 1503, suitable to formulate VOC-free tinting concentrates for both water- and solvent-based decorative paints. These concentrates have excellent compatibility and can therefore be incorporated by the use of low shear forces (shaking machines). verkürzen | |
| Foamaster® PD 1 | BASF Formulation Additives | Foamaster® PD 1 is a defoamer and anti-foaming agent in powder form for cement and concrete products, formulations based on polyvinyl acetate, polyvinyl alcohol, casein, soya protein, wheaten flour and dextrin. It can be easily mixed with all components o...weiterlesen Foamaster® PD 1 is a defoamer and anti-foaming agent in powder form for cement and concrete products, formulations based on polyvinyl acetate, polyvinyl alcohol, casein, soya protein, wheaten flour and dextrin. It can be easily mixed with all components of coatings and adhesives in powder form, preferably in formulations based on polyvinyl acetate, polyvinyl alcohol, casein, soya protein, wheat flour and dextrin. Dry blends containing Foamaster® PD-1 wet faster and more uniformly. Entrapped air, causing problems in pumping, troweling and obtaining a complete cavity fill, is eliminated, thus preventing excessive shrinkage, porosity and other disadvantages of the applied cement or concrete. Further, impermeability is improved. verkürzen | |
| Hydropalat® 100 | BASF Formulation Additives | Hydropalat® 100 is a low VOC, low odor hydrophobic dispersant for interior and exterior architectural coatings. It is used to disperse titanium dioxide and extender pigments. It is added levels ranging from 1.05 to 3.0% based on pigment solids. | |
| Hydropalat® 1080 | BASF Formulation Additives | Hydropalat® 1080 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. Hydropalat® 1080 a...weiterlesen Hydropalat® 1080 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. Hydropalat® 1080 also provides outstanding flow properties even at high pigment load. In topcoats based on different binder types Hydropalat® 1080 improves pigment wetting and therefore increases gloss and color intensity of the paint, especially in combination with organic pigments. This product also shows excellent results in waterbased alkyds, polyester resins as also in aqueous polyurethane emulsions. verkürzen | |
| Hydropalat® 110 | BASF Formulation Additives | Hydropalat® 110 is a substrate wetting agent for aqueous industrial, wood, automotive coatings, printing inks strong reduction of the dynamic surface tension. This product is recommended as a low foaming surfactant and substrate wetting agent for systems ...weiterlesen Hydropalat® 110 is a substrate wetting agent for aqueous industrial, wood, automotive coatings, printing inks strong reduction of the dynamic surface tension. This product is recommended as a low foaming surfactant and substrate wetting agent for systems which are subjected to high mechanical stresses. verkürzen | |
| Hydropalat® 120 | BASF Formulation Additives | Hydropalat® 120 is a low-foaming wetting agent for the printing inks and adhesives industry. It can be used in the formulation of low foaming surfactant blends, especially these subjected to foam promoting mechanical energy. Hydropalat® 120 can also act a...weiterlesen Hydropalat® 120 is a low-foaming wetting agent for the printing inks and adhesives industry. It can be used in the formulation of low foaming surfactant blends, especially these subjected to foam promoting mechanical energy. Hydropalat® 120 can also act as a good antifoam agent in numerous applications. verkürzen | |
| Hydropalat® 140 | BASF Formulation Additives | Hydropalat® 140 is a low-foam flow promoter and substrate wetting agent for aqueous paints and coatings is based on organo modified polysiloxane. compared with substrate wetting agents based on other chemicals, such as block copolymers (Hydropalat® 110, 1...weiterlesen Hydropalat® 140 is a low-foam flow promoter and substrate wetting agent for aqueous paints and coatings is based on organo modified polysiloxane. compared with substrate wetting agents based on other chemicals, such as block copolymers (Hydropalat® 110, 130), sulfosuccinates (Hydropalat® 875) or acetylene diol derivatives, Hydropalat® 140 brings about a much greater reduction in static interfacial tension. Even when it is present in a concentration of 0.5%, values much lower than 25 mN/m can be achieved. verkürzen | |
| HYDROPALAT® 3065 | BASF Formulation Additives | A wetting and dispersing agent for aqueous coatings and pigment pastes, more hydrophilic than HYDROPALAT 1080. | |
| HYDROPALAT® 5040 | BASF Formulation Additives | A wetting and dispersing agent to optimize the dispersing process of pigments and fillers in aqueous system like emulsion paints (matt to glossy), pigment and filler slurries, pigment pastes, ceramics, etc. | |
| HYDROPALAT® 875 PG | BASF Formulation Additives | Highly efficient wetting agent consisting of sulfocarbon acid ester, sodium salt in water / propylenglycol. | |
| Hydropalat® 88 | BASF Formulation Additives | Hydropalat® 88 is a wetting- and dispersing agent for aqueous coatings and printing inks, modified ester of sulfocarboxylic acid. This product is characterized by its excellent solubility in water and its optimal compatibility in different polymer systems...weiterlesen Hydropalat® 88 is a wetting- and dispersing agent for aqueous coatings and printing inks, modified ester of sulfocarboxylic acid. This product is characterized by its excellent solubility in water and its optimal compatibility in different polymer systems. Hydropalat® 88 contains none of the flammable cosolvents needed to improve the solubility of other, conventional sulfocarboxylic acid-based surfactants. Hydropalat® 88, with a flash point of > 100 °C, is therefore not a dangerous substance as defined in the applicable transport regulations. The absence of highly volatile consolvents gives Hydropalat 88 obvious advantages in term of ease of handling. It does not show troublesome skin formation on the product surface, which can occur spontaneously in concentrated surfactant formulations that contain solvents. verkürzen | |
| HYDROPALAT® 885 | BASF Formulation Additives | Wetting agent for aqueous paint systems. | |
| HYDROPALAT® 886 | BASF Formulation Additives | Highly effective, concentrated wetting agent for water based coatings and printing inks. | |
| HYDROPALAT® P | BASF Formulation Additives | Non ionic powdered wetting and dispersing agent for plasters, mortars, fillers and tile adhesives etc. based on oleo-alkylenoxide-block copolymer coated on silica. | |
| Jaypol™ AT1 | Ashland | Jaypol™ AT1 is an alkali soluble acrylic based associative thickener specifically designed for use in aqueous systems requiring a newtonian rheological behavior. It provides an excellent balance between high and low shear viscosities, and an excellent com...weiterlesen Jaypol™ AT1 is an alkali soluble acrylic based associative thickener specifically designed for use in aqueous systems requiring a newtonian rheological behavior. It provides an excellent balance between high and low shear viscosities, and an excellent compatibility with most organic and inorganic pigments and amongst other uses is particularly effective in silk and flat emulsion paints. verkürzen | |
| Jaypol™ AT2 | Ashland | Jaypol™ AT2, when compared with Jaypol™ AT1, provides more in-can viscosity, and is thus recommended for use in interior and exterior flat dispersion paints, where it imparts excellent rheological balance between high and low shear viscosities with low do...weiterlesen Jaypol™ AT2, when compared with Jaypol™ AT1, provides more in-can viscosity, and is thus recommended for use in interior and exterior flat dispersion paints, where it imparts excellent rheological balance between high and low shear viscosities with low dosage. verkürzen | |
| Jaypol™ AT4 | Ashland | Jaypol™ AT4 is an alkali swellable, acrylic-based, associative thickener which introduces high viscosity and thixotropy into water based paints and coatings. It imparts excellent film build whilst maintaining easy application properties. Furthermore, roll...weiterlesen Jaypol™ AT4 is an alkali swellable, acrylic-based, associative thickener which introduces high viscosity and thixotropy into water based paints and coatings. It imparts excellent film build whilst maintaining easy application properties. Furthermore, roller spatter is significantly reduced. verkürzen | |
| KLUCEL™ Hydroxypropylcellulose, Industrial Grade | Ashland | KLUCEL™ Hydroxypropylcellulose, Industrial Grade is a nonionic water-soluble cellulose ether combining organic solvent solubility, themoplasticity and surface activity with the thickening and stabilizing properties of other water-soluble cellulose polymer...weiterlesen KLUCEL™ Hydroxypropylcellulose, Industrial Grade is a nonionic water-soluble cellulose ether combining organic solvent solubility, themoplasticity and surface activity with the thickening and stabilizing properties of other water-soluble cellulose polymers. verkürzen |
