| Aquaflow™ NHS-300E | Ashland | Aquaflow™ NHS-300E is a solvent-free, nonionic synthetic associative thickener designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build an...weiterlesen Aquaflow™ NHS-300E is a solvent-free, nonionic synthetic associative thickener designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build and favorable brush drag. This product is compatible with acrylic, styrene-acrylic, vinyl-acrylic, and vinyl acetate ethylene (VAE) latexes, and can be used in interior and exterior paint formulations. verkürzen | |
| Aquaflow™ NHS-350E | Ashland | Aquaflow™ NHS-350E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development...weiterlesen Aquaflow™ NHS-350E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build and favorable brush drag. It is intended to be used in combination with a low-shear effective NSAT (KU driver) for the optimal balance of Stormer (KU) and ICI viscosity. verkürzen | |
| Aquaflow™ NHS-360 | Ashland | Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most modern latex resin systems and all sheens. This thickener provi...weiterlesen Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most modern latex resin systems and all sheens. This thickener provides highly efficient ICI viscosity development, excellent film build, optimal flow and leveling and favorable brush drag. verkürzen | |
| Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 is a nonionic associative polymer solution designed to increase Stormer consistency and provide superior flow and leveling in waterborne paints and coatings. | |
| Aquaflow™ NLS-220E | Ashland | Aquaflow™ NLS-220E is a nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. This thickener is solvent free and is supplied as a low-viscosity liquid for eas...weiterlesen Aquaflow™ NLS-220E is a nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. This thickener is solvent free and is supplied as a low-viscosity liquid for easy transfer and incorporation. It significantly reduces or eliminates latex agglomeration in paints containing vinyl-acrylic and vinyl acetate-ethylene latexes. verkürzen | |
| Aquaflow™ NMS-450E | Ashland | Aquaflow™ NMS-450E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all sheen levels. This product is designed to provide a b...weiterlesen Aquaflow™ NMS-450E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all sheen levels. This product is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as as the sole thickener in paint formulations based on hydrophobic resins, such as acrylics and styrene acrylics. verkürzen | |
| Aquaflow™ NMS-460E | Ashland | Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of S...weiterlesen Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as the sole thickener in many paint formulation based on hydrophobic resins, such as acrylics and styrene acrylics. With more hydrophilic resins, such as vinyl acetate ethylene (VAE), optimized rheology may be achieved with Aquaflow™ NMS-460E rheology modifier alone or in combination with a supplemental KU driver. verkürzen | |
| Aquaflow™ XLS-500E | Ashland | Aquaflow™ XLS-500E is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is highly effective with 100% acrylic and styrene-acrylic resin systems. This product provides an exceptional balance of l...weiterlesen Aquaflow™ XLS-500E is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is highly effective with 100% acrylic and styrene-acrylic resin systems. This product provides an exceptional balance of leveling and sag resistance when used in combination with a high shear effective NSAT. The optimized rheology modifier package will deliver superior leveling and sag resistance resulting in virtually drip-free application. verkürzen | |
| Aquaflow™ XLS-525E | Ashland | Aquaflow™ XLS-525E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is effective with most latex systems. This product provides an exceptional balance of leveling and sag r...weiterlesen Aquaflow™ XLS-525E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is effective with most latex systems. This product provides an exceptional balance of leveling and sag resistance when used in combination with a high-shear effective NSAT. The optimized rheology modifier package will deliver superior leveling and sag resistance resulting in virtually drip-free application. verkürzen | |
| Aquaflow™ XLS-530E | Ashland | Aquaflow™ XLS-530E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It imparts superior application properties including applied hiding, roller transfer and coverage. It impar...weiterlesen Aquaflow™ XLS-530E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It imparts superior application properties including applied hiding, roller transfer and coverage. It imparts a rich and creamy in-can feel and is effective with a wide range of latex chemistries, including styrene acrylic, acrylic, vinyl acrylic, and vinyl acetate ethylene (VAE). verkürzen | |
| Bacillat™ | Arxada – Troy Corporation | Bacillat™ in-can preservative consists of a low-odor formaldehyde releaser. It is suitable for the preservation of products fulfilling high ecological standards. Furthermore, this product shows a good miscibility with other actives and is easily incorpora...weiterlesen Bacillat™ in-can preservative consists of a low-odor formaldehyde releaser. It is suitable for the preservation of products fulfilling high ecological standards. Furthermore, this product shows a good miscibility with other actives and is easily incorporated into different products. Bacillat™ in-can preservative exhibits superior stability and longlasting efficacy. The spectrum of effect extends to gram-positive and gram-negative bacteria, molds, and yields. verkürzen | |
| Bacillat™ TK | Arxada – Troy Corporation | Bacillat™ TK in-can preservative consists of a combination of a low odor formaldehyde donor and an isothiazolone. A product protected with Bacillat™ TK in recommended use levels complies with the basic conditions of blue angel, the European Eco-label and ...weiterlesen Bacillat™ TK in-can preservative consists of a combination of a low odor formaldehyde donor and an isothiazolone. A product protected with Bacillat™ TK in recommended use levels complies with the basic conditions of blue angel, the European Eco-label and EMICODE EC1 approvals. This combination of actives provides superior stability and long-lasting efficacy. The spectrum of activity includes gram-positive and gram-negative bacteria, yeasts, and molds. verkürzen | |
| Bacillat™ TM | Arxada – Troy Corporation | Bacillat™ TM in-can preservative consists of a combination of a low odor formaldehyde releaser and an isothiazolone product protected with Bacillat™ TM in recommended use-concentrations can fulfill the blue angel and EMICODE EC1 criteria. It features a ra...weiterlesen Bacillat™ TM in-can preservative consists of a combination of a low odor formaldehyde releaser and an isothiazolone product protected with Bacillat™ TM in recommended use-concentrations can fulfill the blue angel and EMICODE EC1 criteria. It features a rapid as well as a long term activity. It is effective against gram-positive and gram-negative bacteria, yeasts, and molds. It is recommended for emulsion paints, dispersions and emulsions, aqueous adhesives, as well as industrial and wood coatings. verkürzen | |
| Bakzid® | Arxada – Troy Corporation | Bakzid® is a broad-spectrum in-can preservative used to avoid deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. It is an easy-to-handle solution. | |
| Bakzid™ 10N | Arxada – Troy Corporation | Bakzid™ 10N in-can preservative consists of a combination of a bisoxazolidine and a pyridine derivative. Being an alkaline product it is especially designed for the protection of high pH products. Furthermore, the product is free of secondary amines. | |
| Bakzid™ 2 | Arxada – Troy Corporation | Bakzid™ 2 in-can preservative is based on the combination of a hexahydrotriazine and a pyridine derivative. It is intended as a basic preservative for incorporation into alkaline products. | |
| BLANOSE™ Refined CMC | Ashland | BLANOSE™ Refined CMC is a water soluble polymer that acts as a thickener, rheology control agent, binder, stabilizer, protective colloid, film former and water retention aid for use in a variety of industrial applications. Supplied in various viscosity ra...weiterlesen BLANOSE™ Refined CMC is a water soluble polymer that acts as a thickener, rheology control agent, binder, stabilizer, protective colloid, film former and water retention aid for use in a variety of industrial applications. Supplied in various viscosity ranges. verkürzen | |
| BODECID™ PLUS SYSTEM CLEANER | Arxada – Troy Corporation | BODECID™ Plus System Cleaner sanitizing solution is a highly effective detergent and consists of a bactericide and a fungicide as a part of an efficient cleaning formulation. Apart from its enhanced soil absorbing properties, BODECID™ Plus System Cleaner ...weiterlesen BODECID™ Plus System Cleaner sanitizing solution is a highly effective detergent and consists of a bactericide and a fungicide as a part of an efficient cleaning formulation. Apart from its enhanced soil absorbing properties, BODECID™ Plus System Cleaner sanitizing solution provides excellent biocidal efficacy. This includes gram-positive and gram-negative bacteria, yeasts and moulds. verkürzen | |
| Bodoxin™ AE | Arxada – Troy Corporation | Bodoxin™ AE in-can preservative is a highly concentrated formulation of a fast acting aliphatic hemiacetal. It is effective in slightly acidic to slightly alkaline media and miscible with water at all ratios. Bodoxin™ AE in-can preservative is highly effe...weiterlesen Bodoxin™ AE in-can preservative is a highly concentrated formulation of a fast acting aliphatic hemiacetal. It is effective in slightly acidic to slightly alkaline media and miscible with water at all ratios. Bodoxin™ AE in-can preservative is highly effective against gram-positive and gram-negative bacteria as well as against yeasts and molds. verkürzen | |
| Bodoxin™ AH | Arxada – Troy Corporation | Bodoxin™ AH in can-preservative is a biocide based on an aliphatic hemiacetal. This active substance provides both fast and a long-lasting efficacy, including gram-positive and gram-negative bacteria as well as yeasts and molds. | |
| Bodoxin™ AM | Arxada – Troy Corporation | Bodoxin™ AM in-can preservative is a combination of ethyleneglycol-hemiformal and chloromethylisothiazolone/methylisothiazolone. The product contains no stabilizing salts. Therefore it can also be easily incorporated into slat-sensitive dispersion product...weiterlesen Bodoxin™ AM in-can preservative is a combination of ethyleneglycol-hemiformal and chloromethylisothiazolone/methylisothiazolone. The product contains no stabilizing salts. Therefore it can also be easily incorporated into slat-sensitive dispersion products. Bodoxin™ AM is a highly concentrated biocide with an optimum pH range from the slightly acidic to slightly alkaline. The two active groups complement each other in the spectrum of efficacy and also in the time required for the effect. The efficacy of this product extends to gram-negative and gram-positive bacteria, molds, and yeasts. verkürzen | |
| Bodoxin™ AO | Arxada – Troy Corporation | Bodoxin™ AO in-can preservative is a combination of an aliphatic hemiacetal and an isothiazolone derivative. The highly concentrated product combines good wet-state preservation with head-space protection. The spectrum of efficacy includes gram-positive a...weiterlesen Bodoxin™ AO in-can preservative is a combination of an aliphatic hemiacetal and an isothiazolone derivative. The highly concentrated product combines good wet-state preservation with head-space protection. The spectrum of efficacy includes gram-positive and gram-negative bacteria and is particularly effective against yeasts and molds. verkürzen | |
| Bodoxin™ AX | Arxada – Troy Corporation | Bodoxin™ AX in-can preservative consists of a fast acting formaldehyde releaser and a mixture of chloromethylisothiazolone/methylisothiazolone (CMIT/MIT). The well balanced spectrum of activity shows good efficiency against gram-positive and gram-negative...weiterlesen Bodoxin™ AX in-can preservative consists of a fast acting formaldehyde releaser and a mixture of chloromethylisothiazolone/methylisothiazolone (CMIT/MIT). The well balanced spectrum of activity shows good efficiency against gram-positive and gram-negative bacteria as well as molds and yeasts. Bodoxin™ AX is designed to provide a very fast mode of action in combination with a long term protection. verkürzen | |
| Bodoxin™ GA | Arxada – Troy Corporation | Bodoxin™ GA in-can preservative consists of the actives (ethylenedioxy)-dimethanol and glutaraldehyde. The combination of these actives results in a product providing a good sanitizing efficacy as well as a good long lasting protection. This long lasting ...weiterlesen Bodoxin™ GA in-can preservative consists of the actives (ethylenedioxy)-dimethanol and glutaraldehyde. The combination of these actives results in a product providing a good sanitizing efficacy as well as a good long lasting protection. This long lasting efficacy also extends to head space protection and includes gram-positive and gram-negative bacteria, yeasts, and molds. verkürzen | |
| Bodoxin™ SE | Arxada – Troy Corporation | Bodoxin™ SE in-can preservative consists of an aliphatic hemiacetal and isothiazolone derivatives. Due to their fast mode of action, the product is especially suitable for the disinfection of contaminated products. The efficacy spectrum of this product in...weiterlesen Bodoxin™ SE in-can preservative consists of an aliphatic hemiacetal and isothiazolone derivatives. Due to their fast mode of action, the product is especially suitable for the disinfection of contaminated products. The efficacy spectrum of this product includes gram-positive and gram-negative bacteria as well as molds and yeasts. Bodoxin™ SE contains no stabilizing salt, therefore it provides excellent material compatibility and is easy to incorporate into products. verkürzen | |
| Bodoxin™ TG | Arxada – Troy Corporation | Bodoxin™ TG in-can preservative contains a combination of an aliphatic hemiacetal and benzisothiazolone. The biocide provides long-term storage and good temperature stability, as well as head space protection and wide spectrum of activity. This product is...weiterlesen Bodoxin™ TG in-can preservative contains a combination of an aliphatic hemiacetal and benzisothiazolone. The biocide provides long-term storage and good temperature stability, as well as head space protection and wide spectrum of activity. This product is therefore particularly suitable for the use in warm climatic zones. the antimicrobial efficacy of Bodoxin™ TG includes gram-positive and gram-negative bacteria, yeasts, and molds. verkürzen | |
| Bodoxin™ TX | Arxada – Troy Corporation | Bodoxin™ TX in-can preservative consists of an aliphatic hemiacetal and an isothiazolone derivative. The well-balanced spectrum of efficacy includes gram-positive and gram-negative bacteria as well as yeasts and molds. Bodoxin™ TX is a cost effective bioc...weiterlesen Bodoxin™ TX in-can preservative consists of an aliphatic hemiacetal and an isothiazolone derivative. The well-balanced spectrum of efficacy includes gram-positive and gram-negative bacteria as well as yeasts and molds. Bodoxin™ TX is a cost effective biocide suitable for various applications and provides reliable protection at low costs. verkürzen | |
| Bodoxin™ WF | Arxada – Troy Corporation | Bodoxin™ WF in-can preservative consists of a fast acting formaldehyde releaser and a mixture of chloromethylisothiazolone/methylisothiazolone (CMIT/MIT). The well balanced spectrum of activity shows good efficacy against gram-positive and gram-negative b...weiterlesen Bodoxin™ WF in-can preservative consists of a fast acting formaldehyde releaser and a mixture of chloromethylisothiazolone/methylisothiazolone (CMIT/MIT). The well balanced spectrum of activity shows good efficacy against gram-positive and gram-negative bacteria as well as molds and yeasts. Bodoxin™ WF is designed to provide a very fast mode of action in combination with a long term protection. verkürzen | |
| Cinon™ FK | Arxada – Troy Corporation | Cinon™ FK fungicide is a highly-active alkaline fungicide based on sodium pyridinethione. It is stable over a wide temperature range and designed for the post-treatment of metal-working fluid systems. This product contains a biodegradable chelating agent,...weiterlesen Cinon™ FK fungicide is a highly-active alkaline fungicide based on sodium pyridinethione. It is stable over a wide temperature range and designed for the post-treatment of metal-working fluid systems. This product contains a biodegradable chelating agent, which provides protection against discoloration in the presence of FE(III). The microbicidal effect covers molds and yeasts, but also extends to gram-positive and gram-negative bacteria. verkürzen | |
| Cinon™ OI | Arxada – Troy Corporation | Cinon™ OI fungicide is a high-quality formulation of two fungicidal substances. The product contains no heavy metals, no aldehydes, and no phenols. It can be incorporated into both aqueous and solvent based products. The biocide is very effective against ...weiterlesen Cinon™ OI fungicide is a high-quality formulation of two fungicidal substances. The product contains no heavy metals, no aldehydes, and no phenols. It can be incorporated into both aqueous and solvent based products. The biocide is very effective against molds. Due to the lack of foam forming, Cinon™ OI is recommended for critical metalworking applications such as grinding emulsions. verkürzen | |
| Culminal™ C-types modified cellulose ethers | Ashland | Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plas...weiterlesen Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plasters, fillers, adhesives and spackling compounds, cement and lime based plasters, tile cements and similar products. verkürzen | |
| Culminal™ CT methylhydroxyethylcellulose | Ashland | Culminal™ CT methylhydroxyethylcellulose are cellulose ethers that, when dissolved in water, offer a variety of functional properties. They are powders, which are used as rheology modifiers, stabilizers, and water-retention agents in emulsion paints. | |
| CULMINAL™ Methylcellulose Derivatives | Ashland | CULMINAL™ Methylcellulose Derivatives are cellulose ethers that, when dissolved in water, offer a variety of functional properties. Culminal products are powders, they are used as thickeners, protective colloids, stabilizers, susp ending aids and water-re...weiterlesen CULMINAL™ Methylcellulose Derivatives are cellulose ethers that, when dissolved in water, offer a variety of functional properties. Culminal products are powders, they are used as thickeners, protective colloids, stabilizers, susp ending aids and water-retention agents in many industrial applications. verkürzen | |
| Densil® ZOD | Arxada – Troy Corporation | Densil® ZOD is a three-active blend biocide formulated to offer dry-film coating protection in humid environments. Densil® ZOD offers controlled-leaching and low water solubility properties of Zinc Omadine® Antimicrobials, complemented with a water-solubl...weiterlesen Densil® ZOD is a three-active blend biocide formulated to offer dry-film coating protection in humid environments. Densil® ZOD offers controlled-leaching and low water solubility properties of Zinc Omadine® Antimicrobials, complemented with a water-soluble fungicide. Densil® ZOD also contains a supplemental algaecide for complete dry-film protection of the coating. verkürzen | |
| Dextrol™ OC-180 | Ashland | Dextrol™ OC-180 is the neutralized (potassium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. | |
| Dextrol™ OC-180HS Phosphate Ester Surfactant | Ashland | Dextrol™ OC-180HS surfactant is the neutralized (sodium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. Depending on the formulation specifics, this p...weiterlesen Dextrol™ OC-180HS surfactant is the neutralized (sodium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. Depending on the formulation specifics, this product can also function as a supplemental dispersant to assist in reduction of pigment flocculation. In addition to use in latex paint, Dextrol™ OC-180HS surfactant provides benefits in universal colorants, to help disperse and stabilize the pigments, thereby enhancing color acceptance of water-based paints. verkürzen | |
| Dextrol™ OC-60 | Ashland | Dextrol™ OC-60 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-6025 | Ashland | Dextrol™ OC-6025 is a ammonium hydroxide salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
| Dextrol™ OC-60EP | Ashland | Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...weiterlesen Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-60EP surfactant can be neutralized using several organic or inorganic bases. Dextrol OC-60EP surfactant also imparts improved gloss and color acceptance in waterborne latex paints. verkürzen | |
| Dextrol™ OC-70 | Ashland | Dextrol™ OC-70 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-70EP | Ashland | Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...weiterlesen Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-70EP phosphate ester surfactant can be neutralized by the user using a number of organic or inorganic bases. verkürzen | |
| Dextrol™ OC-7525 | Ashland | Dextrol™ OC-7525 is a ammonium hydroxide salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
| Drew™ 210-694 | Ashland | Drew™ 210-694 is a foam control agent for use in coatings and printing inks. This product is particularly recommended for acrylate-based wood lacquers. Excellent results have also been obtained in acrylate-alkyd hybrid based industrial wood coatings. Drew...weiterlesen Drew™ 210-694 is a foam control agent for use in coatings and printing inks. This product is particularly recommended for acrylate-based wood lacquers. Excellent results have also been obtained in acrylate-alkyd hybrid based industrial wood coatings. Drew™ 210-694 is a highly efficient foam control agent with excellent persistency. verkürzen | |
| Drew™ 210-862 | Ashland | Drew™ 210-862 is a highly active foam control agent. It has been developed for use in water based coating systems that require a high level of (micro-) foam control under sever application conditions. Due to the high purity of the components used for form...weiterlesen Drew™ 210-862 is a highly active foam control agent. It has been developed for use in water based coating systems that require a high level of (micro-) foam control under sever application conditions. Due to the high purity of the components used for formulating Drew™ 210-862, this agent is also suitable for use in coating systems that require a high level of compliance with regards to food contact. verkürzen | |
| Drew™ 210-886 | Ashland | Drew™ 210-886 is a foam control agent, especially designed for use in surface coatings, overprint varnishes and the synthesis of polymer emulsions. Due to its high ease of incorporation, it has proven particularly suitable for low viscous coating systems ...weiterlesen Drew™ 210-886 is a foam control agent, especially designed for use in surface coatings, overprint varnishes and the synthesis of polymer emulsions. Due to its high ease of incorporation, it has proven particularly suitable for low viscous coating systems such as sealers and topcoats applied by flowcoat, dip, curtain coating or roller and brush. At elevated dosage levels, Drew™ 210-886 exhibits excellent performance in spray or airless spray applied high build topcoats. verkürzen | |
| Drew™ 210-903 | Ashland | Drew™ 210-903 is a 100% active product based on alcohols and polyols and is for use at temperatures about 55° C in application such as PVC synthesis and monomer stripping. At temperatures below 50° C, Drew™ 210-903 does not have any foam suppressing activ...weiterlesen Drew™ 210-903 is a 100% active product based on alcohols and polyols and is for use at temperatures about 55° C in application such as PVC synthesis and monomer stripping. At temperatures below 50° C, Drew™ 210-903 does not have any foam suppressing activity. verkürzen | |
| Drewplus™ L-1311E Foam Control Agent | Ashland | Drewplus™ L-1311E is a foam control agent based on mineral-oil technology designed for architectural paints and coatings. It provides excellent long-term foam control persistency, and prevents air entraining as well as the formation of micro and macro foa...weiterlesen Drewplus™ L-1311E is a foam control agent based on mineral-oil technology designed for architectural paints and coatings. It provides excellent long-term foam control persistency, and prevents air entraining as well as the formation of micro and macro foam on the paint film surface. This product is designed for use in a wide range of water-based systems and is particularly suitable for emulsion paints and plasters. verkürzen | |
| Drewplus™ L-1513 Foam Control Agent | Ashland | Drewplus™ L-1513 is a 100% active foam control agent designed specifically for use in water-based paint systems. Drewplus™ L-1513 is a high efficiency, hydrocarbon oil-based antifoaming agent, and is formulated to control foam at any point during manufact...weiterlesen Drewplus™ L-1513 is a 100% active foam control agent designed specifically for use in water-based paint systems. Drewplus™ L-1513 is a high efficiency, hydrocarbon oil-based antifoaming agent, and is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. Drewplus™ L-1513 foam control agent is readily dispersible and has an outstanding long-term foam control persistency. verkürzen | |
| Drewplus™ L-1600 Foam Control Agent | Ashland | Drewplus™ L-1600 foam control agent is a 100% active, high-efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or...weiterlesen Drewplus™ L-1600 foam control agent is a 100% active, high-efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. Drewplus™ L-1600 foam control agent is dispersible in a water-based coating system and provides outstanding initial and long-term foam control. verkürzen | |
| Drewplus™ L-1700 Foam Control Agent | Ashland | Drewplus™ L-1700 Foam Control Agent is a 100% active, high efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or...weiterlesen Drewplus™ L-1700 Foam Control Agent is a 100% active, high efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. This product is dispersible in a water-based coating system and provides outstanding initial and long-term foam control. verkürzen | |
| Drewplus* L-3500 Foam Control Agent | Ashland | Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spr...weiterlesen Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spray, air mix or HVLP. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. verkürzen | |
| Drewplus™ L-3510 Foam Control Agent | Ashland | Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatib...weiterlesen Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. verkürzen | |
| Drewplus™ S-4273 Foam Control Agent | Ashland | Drewplus™ S-4273 Foam Control Agent is designed for use in surface coatings and printing inks. This product is recommended for foam control in industrial wood coatings, semi-gloss, high-gloss architectural paints and adhesives. Excellent results have also...weiterlesen Drewplus™ S-4273 Foam Control Agent is designed for use in surface coatings and printing inks. This product is recommended for foam control in industrial wood coatings, semi-gloss, high-gloss architectural paints and adhesives. Excellent results have also been achieved in flexographic printing inks and overprint varnishes. verkürzen | |
| Drewplus™ S-4287 | Ashland | Drewplus™ S-4287 (formerly known as DREW 210-793) is a foam control agent for use in water based coatings. It is particularly recommended for high-gloss decorative paints. Excellent results have also been obtained in parquet lacquers. It also provides exc...weiterlesen Drewplus™ S-4287 (formerly known as DREW 210-793) is a foam control agent for use in water based coatings. It is particularly recommended for high-gloss decorative paints. Excellent results have also been obtained in parquet lacquers. It also provides excellent deaeration properties in low viscous (airless) sprayable systems. Drewplus™ S-4287 exhibits a superb balance between activity and compatibility and is highly efficient. It is a product with zero V.O.C. verkürzen | |
| Drewplus™ S-4288 Foam Control Agent | Ashland | Drewplus™ S-4288 foam control agent is a non-ionic proprietary formulation of surface active agents, silicones. it is designed for use in water-based coatings. Drewplus™ S-4288 foam control agent is recommended for high-gloss decorative paints. Excellent ...weiterlesen Drewplus™ S-4288 foam control agent is a non-ionic proprietary formulation of surface active agents, silicones. it is designed for use in water-based coatings. Drewplus™ S-4288 foam control agent is recommended for high-gloss decorative paints. Excellent results have also been obtained in parquet lacquers. Drewplus™ S-4288 foam control agent provides excellent deaeration properties in low viscous (airless) sprayable systems. Drewplus™ S-4288 foam control agent exhibits a superb balance between activity and compatibility and is highly efficient. verkürzen | |
| Drewplus™ S-4374 Foam Control Agent | Ashland | Drewplus™ S-4374 foam control agent is especially designed for use in surface coatings, overprint varnishes and pigmented inks. The product has proven particularly suitable for use in industrial wood coatings, applied by flow coat, dip, curtain coating or...weiterlesen Drewplus™ S-4374 foam control agent is especially designed for use in surface coatings, overprint varnishes and pigmented inks. The product has proven particularly suitable for use in industrial wood coatings, applied by flow coat, dip, curtain coating or spray; and also exhibits excellent performance in brush or roller applied wood coating systems. Drewplus™ S-4374 foam control agent is a 40 percent active emulsion of surface active agents and hydrophobes in water. verkürzen | |
| Drewplus™ S-4386 Foam Control Agent | Ashland | Drewplus™ S-4386 Foam Control Agent is a non-ionic aqueous emulsion of silica derivatives, silicones, and surfactants. It is formulated for use in water-based coatings, printing inks, graphic arts, wood coatings and high-gloss decorative paints. It is a h...weiterlesen Drewplus™ S-4386 Foam Control Agent is a non-ionic aqueous emulsion of silica derivatives, silicones, and surfactants. It is formulated for use in water-based coatings, printing inks, graphic arts, wood coatings and high-gloss decorative paints. It is a highly efficient foam control agent with fast performance, excellent persistency and compatibility. verkürzen | |
| Drewplus™ S-4480 Foam Control Agent | Ashland | Drewplus™ S-4480 foam control agent is a non-ionic blend of silicones and paraffinic oil. It is formulated for use in water-based coatings, particularly in clear systems. It is a highly efficient foam control agent with fast performance, excellent persist...weiterlesen Drewplus™ S-4480 foam control agent is a non-ionic blend of silicones and paraffinic oil. It is formulated for use in water-based coatings, particularly in clear systems. It is a highly efficient foam control agent with fast performance, excellent persistence and compatibility. Since it functions as an air-release agent, it is particularly effective on microfoam in spray-applied coatings. verkürzen | |
| Drewplus™ T-1201 Foam Control Agent | Ashland | Drewplus™ T-1201 is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201 is particularly recommended for SBR and acrylic emulsions. It may be used both...weiterlesen Drewplus™ T-1201 is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201 is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of polymer emulsions. verkürzen | |
| Drewplus™ T-1201E Foam Control Agent | Ashland | Drewplus™ T-1201E is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201E is particularly recommended for SBR and acrylic emulsions. It may be used bo...weiterlesen Drewplus™ T-1201E is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201E is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of polymer emulsions. verkürzen | |
| Drewplus™ T-1202E Foam Control Agent | Ashland | Drewplus™ T-1202E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Because of its excellent compatibility, Drewplus™ T-1202E is particularly recommended for SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. | |
| Drewplus™ T-3200 Foam Control Agent | Ashland | Drewplus™ T-3200 is a foam control agent for use in coatings, emulsion polymerization processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-3200 is particularly recommended for SBR and acrylic emulsions. It may be...weiterlesen Drewplus™ T-3200 is a foam control agent for use in coatings, emulsion polymerization processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-3200 is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of emulsions. Drewplus™ T-3200 is a non-ionic proprietary formulation of silica derivatives, paraffinic oil and esters. verkürzen | |
| Drewplus™ T-3211 Foam Control Agent | Ashland | Drewplus™ T-3211 is a foam control agent for use in coatings, emulsion polymerisation processes and adhesives. Excellent results have been achieved in acrylic paper coatings and pressure sensitive adhesives. Drewplus™ T-3211exhibits excellent foam control...weiterlesen Drewplus™ T-3211 is a foam control agent for use in coatings, emulsion polymerisation processes and adhesives. Excellent results have been achieved in acrylic paper coatings and pressure sensitive adhesives. Drewplus™ T-3211exhibits excellent foam control whilst not causing problems with surface wetting. Drewplus™ T-3211 is a 100% active, non-ionic proprietary formulation of silica derivatives, paraffinic oil and esters. verkürzen | |
| Drewplus™ T-4201 Foam Control Agent | Ashland | Drewplus™ T-4201 is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsio...weiterlesen Drewplus™ T-4201 is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. Drewplus™ T-4201 foam control agent is a 100- percent active, non-ionic proprietary formulation of silica derivatives, mineral oil and esters. verkürzen | |
| Drewplus™ T-4201E Foam Control Agent | Ashland | Drewplus™ T-4201E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsi...weiterlesen Drewplus™ T-4201E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. Drewplus™ T-4201E foam control agent is a 100- percent active, non-ionic proprietary formulation of silica derivatives, mineral oil and esters. verkürzen | |
| Drewplus™ T-4202E Foam Control Agent | Ashland | Drewplus™ T-4202E is a foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. | |
| Drewplus™ T-4303 | Ashland | Drewplus™ T-4303 is a 100% active foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. Drewplus™ ...weiterlesen Drewplus™ T-4303 is a 100% active foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. Drewplus™ T-4303 is a non-ionic proprietary formulation of silica derivatives, mineral oil and esters. verkürzen | |
| Drewplus™ T-4500E Foam Control Agent | Ashland | Drewplus™ T-4500E is a foam control agent for use in coating and emulsion polymerization processes. It is particularly recommended for flat and semi-gloss decorative paints. | |
| Drewplus™ TS-2200 Foam Control Agent | Ashland | Drewplus™ TS-2200 is a foam control agent for use in coatings and emulsion polymerization processes. Because of its excellent compatibility, this product is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture...weiterlesen Drewplus™ TS-2200 is a foam control agent for use in coatings and emulsion polymerization processes. Because of its excellent compatibility, this product is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of emulsions. verkürzen | |
| Drewplus™ TS-4384 Foam Control Agent | Ashland | Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-glos...weiterlesen Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss acrylic architectural paints, water- based parquet lacquers. Excellent results have also been obtained in acrylic anti- corrosive primers, flexographic printing inks and water-reducible alkyd based systems. Drewplus™ TS-4384 foam control agent is highly efficient and exhibits excellent persistency. verkürzen | |
| Drewplus™ TS-4385 Foam Control Agent | Ashland | Drewplus™ TS-4385 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss architectural paints and parquet lacquers. Excellent results have also been obtained...weiterlesen Drewplus™ TS-4385 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss architectural paints and parquet lacquers. Excellent results have also been obtained in acrylic anti-corrosive primers, flexographic printing inks and water-reducible alkyd based systems. This product is highly efficient and exhibits excellent persistence. verkürzen | |
| Drewplus™ TS-4387 Foam Control Agent | Ashland | Drewplus™ TS-4387 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for flexographic printing inks, overprint varnishes and wood lacquers. | |
| Drewplus™ TS-4481 Foam Control Agent | Ashland | Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and c...weiterlesen Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and compatibility. Since it functions as an air release agent it is particularly effective on microfoam in spray-applied industrial coatings. verkürzen | |
| Drewplus™ TS-4582 Foam Control Agent | Ashland | Drewplus™ TS-4582 is a foam control agent for use in surface coatings and printing inks. This product is particularly recommended for use in high gloss coatings, flexographic printing inks and overprint varnishes. | |
| Drewplus™ W-4510E Foam Control Agent | Ashland | Drewplus™ W-4510E is a 100% active foam control agent for use in coatings, printing inks and adhesives. Excellent results have been achieved in acrylic pressure sensitive adhesives. Drewplus™ W-4510E is a non-ionic proprietary formulation of wax derivativ...weiterlesen Drewplus™ W-4510E is a 100% active foam control agent for use in coatings, printing inks and adhesives. Excellent results have been achieved in acrylic pressure sensitive adhesives. Drewplus™ W-4510E is a non-ionic proprietary formulation of wax derivatives and mineral oil. verkürzen | |
| Ebotec™ BT80 | Arxada – Troy Corporation | Ebotec™ BT80 in-can preservative is a combination of benzisothiazolone and phenoxyethanol. It is characterized by excellent temperature stability. This biocide is pH neutral and effective in both acidic and alkaline systems. | |
| Ebotec™ MB | Arxada – Troy Corporation | Ebotec™ MB in-can preservative is based on a combination of chloromethyl-isothiazolone/methylisothiazolone (ratio 3:1) and bronopol. The product is odorless and can be used in a broad pH-range. As Ebotec™ MB in-can preservative is suitable for the preserv...weiterlesen Ebotec™ MB in-can preservative is based on a combination of chloromethyl-isothiazolone/methylisothiazolone (ratio 3:1) and bronopol. The product is odorless and can be used in a broad pH-range. As Ebotec™ MB in-can preservative is suitable for the preservation of various liquid products. verkürzen | |
| Ebotec™ MB150 | Arxada – Troy Corporation | Ebotec™ MB150 in-can preservative is based on a combination of chloromethyl-isothiazolone/methylisothiazolone (ratio 3:1) and bronopol. The pH-optimum extends from the slightly acidic to the slightly alkaline range. Due to the high concentration of active...weiterlesen Ebotec™ MB150 in-can preservative is based on a combination of chloromethyl-isothiazolone/methylisothiazolone (ratio 3:1) and bronopol. The pH-optimum extends from the slightly acidic to the slightly alkaline range. Due to the high concentration of active substances Ebotec™ MB150 in-can preservative is highly effective at low dosages. verkürzen | |
| Ebotec™ MB/SF | Arxada – Troy Corporation | Ebotec™ MB/SF in-can preservative is a salt-free biocide based on 5-chloro-2-methyl-2H-isothiazol-3-one / 2-methyl-2H-isothiazol-3-one (CMIT/MIT) (ratio 3:1) and Bronopol. The pH optimum extends from the slightly acidic to the slightly alkaline range. | |
| Fungitrol™ 10W | Arxada – Troy Corporation | Fungitrol™ 10W fungicide/algaecide is a preparation based on 2-octyl-2H-isothiazol-3-one (OIT) with diuron and carbendazim, especially suitable for dry-film protection of paints, putties and other wall coatings. Fungitrol™ 10W fungicide/algaecide provides...weiterlesen Fungitrol™ 10W fungicide/algaecide is a preparation based on 2-octyl-2H-isothiazol-3-one (OIT) with diuron and carbendazim, especially suitable for dry-film protection of paints, putties and other wall coatings. Fungitrol™ 10W fungicide/algaecide provides high performances against fungi and algae as well as a good leaching resistance. verkürzen | |
| Fungitrol® 11E | Arxada – Troy Corporation | Fungitrol® 11E is a powdered, non-metallic organic microbiocide for use in solvent-based paints, stains, plastics, compounds, and wood/plastic composites. It is highly effective against a variety of microorganisms and is suitable for use in solvent-borne ...weiterlesen Fungitrol® 11E is a powdered, non-metallic organic microbiocide for use in solvent-based paints, stains, plastics, compounds, and wood/plastic composites. It is highly effective against a variety of microorganisms and is suitable for use in solvent-borne exterior paints and stains. verkürzen | |
| Fungitrol™ 400G | Arxada – Troy Corporation | Fungitrol™ 400G is based on IPBC (3-iodo-2-propynyl-n-butylcarbamate) chemistry, a highly effective, full-spectrum fungicide. It has been widely used for many years to prevent defacement and deterioration by fungi, molds and mildew. | |
| Fungitrol® 404-DS | Arxada – Troy Corporation | Fungitrol® 404-DS is a broad-spectrum microbicide for the control of mildew and fungi. It provides excellent performance characteristics when used as a fungicide/mildewcide in aqueous paints, coatings, adhesives, caulks, sealants, grouts, joint compounds,...weiterlesen Fungitrol® 404-DS is a broad-spectrum microbicide for the control of mildew and fungi. It provides excellent performance characteristics when used as a fungicide/mildewcide in aqueous paints, coatings, adhesives, caulks, sealants, grouts, joint compounds, and wood preservative stains. verkürzen | |
| Fungitrol® 720 | Arxada – Troy Corporation | Fungitrol® 720 is a fungicide that offers broad-spectrum protection against degradation, discoloration, and defacement caused by mold, mildew, and algae. | |
| Fungitrol™ 940G | Arxada – Troy Corporation | Fungitrol™ 940G is a water-based dispersion of IPBC which offers highly effective, broad-spectrum protection against degradation, discoloration, and defacement caused by mold and mildew. It can be uesd in adhesives, inks, paints and stains, paper coatings...weiterlesen Fungitrol™ 940G is a water-based dispersion of IPBC which offers highly effective, broad-spectrum protection against degradation, discoloration, and defacement caused by mold and mildew. It can be uesd in adhesives, inks, paints and stains, paper coatings, and wood preservation. verkürzen | |
| Fungitrol® C450 | Arxada – Troy Corporation | Fungitrol® C450 is a broad spectrum fungicide and algaecide with high purity. It is a pure powder of 3-iodo-2-propynyl butylcarbamate which offers highly effective, broad-spectrum protection against degradation, discoloration and defacement caused by mold...weiterlesen Fungitrol® C450 is a broad spectrum fungicide and algaecide with high purity. It is a pure powder of 3-iodo-2-propynyl butylcarbamate which offers highly effective, broad-spectrum protection against degradation, discoloration and defacement caused by mold, mildew, and algae. This product is recommended for emulsion paints and metal-working fluid concentrations. verkürzen | |
| Fungitrol™ IP 24 | Arxada – Troy Corporation | Fungitrol™ IP 24 is an optimized powder of IPBD for the prevention of mold in gypsum-based plasters, joint compounds, and other dry mix construction products. It is specifically formulated as a free-flowing powder for ease of production and no visual imp...weiterlesen Fungitrol™ IP 24 is an optimized powder of IPBD for the prevention of mold in gypsum-based plasters, joint compounds, and other dry mix construction products. It is specifically formulated as a free-flowing powder for ease of production and no visual impact on finished products. verkürzen | |
| Fungitrol™ L30 BDG | Arxada – Troy Corporation | Fungitrol™ L30 BDG is a 30% solution of 3-iodo-2-propynyl butylcarbamate in diethylene glycol monnobutyl ether. IPBC is a highly effective, broad-spectrum fungicide, algaecide and bactericide. It has been widely used for many years to prevent defacement a...weiterlesen Fungitrol™ L30 BDG is a 30% solution of 3-iodo-2-propynyl butylcarbamate in diethylene glycol monnobutyl ether. IPBC is a highly effective, broad-spectrum fungicide, algaecide and bactericide. It has been widely used for many years to prevent defacement and deterioration by fungi, moulds and mildews. This product is recommended for wood coatings and metal-working fluid systems. verkürzen | |
| Fungitrol™ L30 DPG | Arxada – Troy Corporation | Fungitrol™ L30 DPG is a broad spectrum fungicide and algaecide. It is a 30% solution of 3-iodo-2-propynyl butylcarbamate in dipropylene glycol which offers highly effective, broad-spectrum protection against degradation, discoloration and defacement cause...weiterlesen Fungitrol™ L30 DPG is a broad spectrum fungicide and algaecide. It is a 30% solution of 3-iodo-2-propynyl butylcarbamate in dipropylene glycol which offers highly effective, broad-spectrum protection against degradation, discoloration and defacement caused by mold, mildew, and algae. this product is recommended for metalworking fluid concentrates, inks, and wood coatings. verkürzen | |
| Fungitrol™ OTZ4 | Arxada – Troy Corporation | Fungitrol™ OTZ4 fungicide/algaecide is a water-based preparation based on 2-octyl-2H-isothiazol-3-one (OIT) with terbutryn, and pyrithione zinc. Fungitrol™ OTZ4 fungicide/algaecide is a modern dry-film preservative designed for facade paints and putties. | |
| Fungitrol® T80 | Arxada – Troy Corporation | Fungitrol® T80 algaecide is a preparation based on terbutryn, particularly suitable for film protection of cement-based grouts and mortars. Fungitrol® T80 algaecide provides a broad activity spectrum against algae which can easily grow onto the film surfa...weiterlesen Fungitrol® T80 algaecide is a preparation based on terbutryn, particularly suitable for film protection of cement-based grouts and mortars. Fungitrol® T80 algaecide provides a broad activity spectrum against algae which can easily grow onto the film surface of such porous material when applied outdoors. Owing to its very low solubility in water, its good photostability and non volatility, Fungitrol® T80 algaecide offers a high leaching resistance in such mineral products providing them a long lasting protection. Fungitrol® T80 algaecide is also suitable for silicate paints due to the stability in alkaline conditions. verkürzen | |
| Fungitrol™ TL2 | Arxada – Troy Corporation | Fungitrol™ TL2 remedial wash concentrate is a bactericide / fungicide / algaecide concentrate based on 2-octyl- 2Hisothiazol-3-one (OIT) and a combination of quaternary ammonium chlorides (BKC and DDMAC), particularly suitable for curative and preventativ...weiterlesen Fungitrol™ TL2 remedial wash concentrate is a bactericide / fungicide / algaecide concentrate based on 2-octyl- 2Hisothiazol-3-one (OIT) and a combination of quaternary ammonium chlorides (BKC and DDMAC), particularly suitable for curative and preventative treatment of all surfaces covered with moulds, algae and lichens. verkürzen | |
| Fungitrol™ TL3 | Arxada – Troy Corporation | Fungitrol™ TL3 remedial wash concentrate is a bactericide / fungicide / algaecide concentrate based on 2-octyl- 2Hisothiazol-3-one (OIT) and a combination of quaternary ammonium chlorides (BKC and DDMAC), particularly suitable for curative and preventativ...weiterlesen Fungitrol™ TL3 remedial wash concentrate is a bactericide / fungicide / algaecide concentrate based on 2-octyl- 2Hisothiazol-3-one (OIT) and a combination of quaternary ammonium chlorides (BKC and DDMAC), particularly suitable for curative and preventative treatment of all surfaces covered with moulds, algae and lichens. verkürzen | |
| Fungitrol™ ZO3 | Arxada – Troy Corporation | Fungitrol™ ZO3 dry-film preservative is a fungicide preparation based on octylisothiazolone (OIT) with zinc pyridinethione. Fungitrol™ ZO3 dry-film preservative is particularly suitable for dry film protection of waterborne paints. | |
| Jaypol™ AT1 | Ashland | Jaypol™ AT1 is an alkali soluble acrylic based associative thickener specifically designed for use in aqueous systems requiring a newtonian rheological behavior. It provides an excellent balance between high and low shear viscosities, and an excellent com...weiterlesen Jaypol™ AT1 is an alkali soluble acrylic based associative thickener specifically designed for use in aqueous systems requiring a newtonian rheological behavior. It provides an excellent balance between high and low shear viscosities, and an excellent compatibility with most organic and inorganic pigments and amongst other uses is particularly effective in silk and flat emulsion paints. verkürzen | |
| Jaypol™ AT2 | Ashland | Jaypol™ AT2, when compared with Jaypol™ AT1, provides more in-can viscosity, and is thus recommended for use in interior and exterior flat dispersion paints, where it imparts excellent rheological balance between high and low shear viscosities with low do...weiterlesen Jaypol™ AT2, when compared with Jaypol™ AT1, provides more in-can viscosity, and is thus recommended for use in interior and exterior flat dispersion paints, where it imparts excellent rheological balance between high and low shear viscosities with low dosage. verkürzen | |
| Jaypol™ AT4 | Ashland | Jaypol™ AT4 is an alkali swellable, acrylic-based, associative thickener which introduces high viscosity and thixotropy into water based paints and coatings. It imparts excellent film build whilst maintaining easy application properties. Furthermore, roll...weiterlesen Jaypol™ AT4 is an alkali swellable, acrylic-based, associative thickener which introduces high viscosity and thixotropy into water based paints and coatings. It imparts excellent film build whilst maintaining easy application properties. Furthermore, roller spatter is significantly reduced. verkürzen | |
| KLUCEL™ Hydroxypropylcellulose, Industrial Grade | Ashland | KLUCEL™ Hydroxypropylcellulose, Industrial Grade is a nonionic water-soluble cellulose ether combining organic solvent solubility, themoplasticity and surface activity with the thickening and stabilizing properties of other water-soluble cellulose polymer...weiterlesen KLUCEL™ Hydroxypropylcellulose, Industrial Grade is a nonionic water-soluble cellulose ether combining organic solvent solubility, themoplasticity and surface activity with the thickening and stabilizing properties of other water-soluble cellulose polymers. verkürzen | |
| Klucel™ MS Hydroxypropylcellulose | Ashland | Klucel™ MS is a grade of hydroxypropyl cellulose as a thickener and anti-sagging agent for inorganic zinc rich primers. This HPC technology enables a major improvement in dissolution speed in polar organic solvents, including methanol, isopropyl alcohol a...weiterlesen Klucel™ MS is a grade of hydroxypropyl cellulose as a thickener and anti-sagging agent for inorganic zinc rich primers. This HPC technology enables a major improvement in dissolution speed in polar organic solvents, including methanol, isopropyl alcohol and xylene. Furthermore, the thickening efficiency has significantly improved compared to conventional HPCs. verkürzen | |
| KLUCEL™ PR Hydroxypropylcellulose | Ashland | KLUCEL™ PR Hydroxypropylcellulose is a a non-ionic water-soluble cellulosic polymer. It is recommended for use as a thickener in paint and varnish removers are KLUCEL™ PR is specially tested for solubility and viscosity development in methylene chloride/...weiterlesen KLUCEL™ PR Hydroxypropylcellulose is a a non-ionic water-soluble cellulosic polymer. It is recommended for use as a thickener in paint and varnish removers are KLUCEL™ PR is specially tested for solubility and viscosity development in methylene chloride/methanol mixtures. verkürzen |
