| 1,3,5-Tris[(3,3,3-trifluoropropyl)methyl] cyclotrisiloxane FD-1000 | Zhejiang Feidian Chemical Co., Ltd. | FD-1000 is a 1,3,5-Trimethyl-1,3,5-tris(3,3,3-trifluoropropyl)cyclotrisiloxane. It is supplied in white crystal form. | |
| 2-Ethylhexanoic Acid | Penpet Petrochemical Trading GmbH | 2-Ethylhexanoic Acid, in the form of a dense, clear, colourless to yellow liquid with a faint odour, is a catalyst that can be used in the dye and paint, and printing ink industry. This product is insoluble in water but is soluble in almost all conventio...weiterlesen 2-Ethylhexanoic Acid, in the form of a dense, clear, colourless to yellow liquid with a faint odour, is a catalyst that can be used in the dye and paint, and printing ink industry. This product is insoluble in water but is soluble in almost all conventional solvents. Most of its siccatives are metal salts that can be used as drying agents. verkürzen | |
| 2,4,7,9-Tetramethyl-decyne-5-diol-4,7, TMDD | BASF SE, Intermediates Division | 2,4,7,9-Tetramethyl-Decyne-5-Diol-4,7, TMDD is an antifoaming and wetting agent for water-borne coatings and inks. TMDD is suitable for all water-borne coatings (ED-coatings, water-borne stoving enamels, water-borne house and wall paints) and inks. | |
| (3,3,3 Tri FluoroPropyl) Methyl Di-Methoxy Silane FD-1001 | Zhejiang Feidian Chemical Co., Ltd. | FD-1001 is a (3,3,3 tri fluoro propyl) methyl di-methoxy silane. It is supplied as a colorless liquid. | |
| 4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) | North Wanxing Chemical Co., Ltd. | 4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) is a hindered-amine light stabilizer intermediate that is a clear or yellowish liquid in appearance. This product is used to provide UV protection and stabilization in printing, paints and coatings. 4-Amino-2,2,...weiterlesen 4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) is a hindered-amine light stabilizer intermediate that is a clear or yellowish liquid in appearance. This product is used to provide UV protection and stabilization in printing, paints and coatings. 4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) has a boiling point of 188-189°C, gas chromatography content of 98% minimum, and a melting point of 16-18°C. verkürzen | |
| 4HBA | Kowa Europe GmbH | 4HBA is a rheology modifier with high cross-linking ability and good adhesion. It provides scratch resistance with good weatherability. 4HBA can be co-polymerized with various vinyl monomers. It is suitable for paint and coating, automotive top clear coat...weiterlesen 4HBA is a rheology modifier with high cross-linking ability and good adhesion. It provides scratch resistance with good weatherability. 4HBA can be co-polymerized with various vinyl monomers. It is suitable for paint and coating, automotive top clear coatings, water borne coatings, powder coatings, adhesives, urethane finishes, and UV inkjet ink. verkürzen | Request Sample |
| 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide | Hainan Zhongxin Chemical Co., Ltd. | 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) is a white granule powder that is 99% pure. It is primarily used as an antibacterial agent, antioxidant, discoloration preventive and fireproofing agent. DOPO can also be used as a reactant for syn...weiterlesen 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) is a white granule powder that is 99% pure. It is primarily used as an antibacterial agent, antioxidant, discoloration preventive and fireproofing agent. DOPO can also be used as a reactant for synthesis of monomer and water-thinned ink compositions. verkürzen | |
| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...weiterlesen 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. verkürzen | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| A 174 | BIP (Oldbury) Ltd | A 174 is a non re-wetting emulsifier. It is designed for use with water repellants and fluorochemical finishes. It an also be used as a foaming agent for use in foam finishing systems. | |
| A 199 | BIP (Oldbury) Ltd | A 199 is a permanent repellant for all fibre types. | |
| A163 | Tianyi Chemical Engineering Material Co., Ltd. | A163, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...weiterlesen A163, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. verkürzen | |
| AC 108 | BIP (Oldbury) Ltd | AC 108 is a modified ammonium chloride catalyst. It is a neutral clear liquid solution with low reactivity. Primarily used as a catalyst for urea and melamine resins. | |
| AC 119 | BIP (Oldbury) Ltd | AC 119 is a modified magnesium chloride catalyst. In a highly reactivity, low PH clear solution. It has applications where high production speeds required. | |
| AC 178 | BIP (Oldbury) Ltd | AC 178 is a magnesium chloride catalyst. It has medium reactivity and is a clear solution. It is mainly used in medium cure catalyst having minimum effect on shade. | |
| AC 600 | BIP (Oldbury) Ltd | AC 600 is an amine salt of p-toluene sulphonic acid in isopropanol. It is a highly reactive, clear solution. Primarily recommended for use in curing HMMM resin PT 370. | |
| ACEMATT® 3300 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 3300 is an advanced polymer-treated thermal silica, characterized by very good matting efficiency combined with high transparency. It has been developed to use in soft-feel coatings with high haptic requirements. It is used for water-based coatin...weiterlesen ACEMATT® 3300 is an advanced polymer-treated thermal silica, characterized by very good matting efficiency combined with high transparency. It has been developed to use in soft-feel coatings with high haptic requirements. It is used for water-based coatings, waterborne UV coatings, coatings for leather and films, and all types of top coats. Coating formulations containing this product has also shown outstanding resistance to household chemicals. verkürzen | Request Sample |
| ACEMATT® 3400 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 3400 is a matting agent exhibiting a multitude of exciting benefits. In solvent and waterborne coatings, the surface modification leads to an outstanding suspension behavior. In waterborne systems, there is only a minimum adsorption of associativ...weiterlesen ACEMATT® 3400 is a matting agent exhibiting a multitude of exciting benefits. In solvent and waterborne coatings, the surface modification leads to an outstanding suspension behavior. In waterborne systems, there is only a minimum adsorption of associative thickeners resulting in improved rheology stability. Excellent transparency is obtained making it ideal for clear wood coatings, as observed by the depth of color when applied over colored substrates. verkürzen | Request Sample |
| ACEMATT® 3600 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 3600 is a high performance, very fine-grained polymer-treated precipitated silica. This product is especially developed for 100% radically curing UV-coatings obtaining films with very high surface smoothness. ACEMATT® 3600 provides a very low th...weiterlesen ACEMATT® 3600 is a high performance, very fine-grained polymer-treated precipitated silica. This product is especially developed for 100% radically curing UV-coatings obtaining films with very high surface smoothness. ACEMATT® 3600 provides a very low thickening effect and high chemical resistance. It is particularly suitable for use in very thin or very thick UV-coating. verkürzen | Request Sample |
| ACEMATT® 810 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 810 is an untreated coarse-grained precipitated silica and is distinguished by high matting efficiency and particularly suitable for pigmented coatings systems. This product is suggested to be used in can and coil coatings, sheet coatings, and de...weiterlesen ACEMATT® 810 is an untreated coarse-grained precipitated silica and is distinguished by high matting efficiency and particularly suitable for pigmented coatings systems. This product is suggested to be used in can and coil coatings, sheet coatings, and decorative and industrial coatings as well. ACEMATT® 810 is easily and evenly dispersed in coatings, and does not adversely affect the other application properties of coating systems. verkürzen | Request Sample |
| ACEMATT® HK 125 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 125 is a high performance, untreated coarse-grained precipitated silica with heterogeneous particle size distribution. This efficient matting agent is particularly suitable for pigmented systems with low sheen, 85° reflectometer value. ACEMAT...weiterlesen ACEMATT® HK 125 is a high performance, untreated coarse-grained precipitated silica with heterogeneous particle size distribution. This efficient matting agent is particularly suitable for pigmented systems with low sheen, 85° reflectometer value. ACEMATT® HK 125 is often used in wood and decorative coatings. verkürzen | Request Sample |
| ACEMATT® HK 390 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 390 is an untreated, finer grade matting agent based on precipitated silica. Providing very high compatibility it can be used in a large variety of coatings. The improved orientation in coating systems effectively prevents mottling. | Request Sample |
| ACEMATT® HK 400 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 400 is a high performance, untreated fine-grained precipitated silica developed for a variety of applications in paints and coatings. This matting agent is primarily used in pigmented coatings systems. ACEMATT® HK 400 is widley used in can and...weiterlesen ACEMATT® HK 400 is a high performance, untreated fine-grained precipitated silica developed for a variety of applications in paints and coatings. This matting agent is primarily used in pigmented coatings systems. ACEMATT® HK 400 is widley used in can and coil coatings, decorative, wood, and industrial coatings. verkürzen | Request Sample |
| ACEMATT® HK 440 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 440 is a high performance, untreated extremely coarse-grained precipitated silica developed for a variety of applications in paint and coatings. This product is particularly suitable for pigmented coatings systems with very low sheen, 85° refl...weiterlesen ACEMATT® HK 440 is a high performance, untreated extremely coarse-grained precipitated silica developed for a variety of applications in paint and coatings. This product is particularly suitable for pigmented coatings systems with very low sheen, 85° reflectometer value. This highly efficient matting agent is used in decorative and industrial coatings, base coats and thick-film coatings. verkürzen | Request Sample |
| ACEMATT® HK 520 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 520 is an untreated, medium particle-sized precipitated silica. Providing very high compatibility it can be used in a large variety of coatings. The improved orientation in coating systems effectively prevents mottling. | Request Sample |
| ACEMATT® OK 390 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 390 is a wax-treated, finer-grade matting agent based on precipitated silica. Providing very high compatibility it can be used in a large variety of coatings. | Request Sample |
| ACEMATT® OK 412 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 412 is a high performance, fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This effective matting agent is suitable for pigmented coatings. Due to the remarkable suspension be...weiterlesen ACEMATT® OK 412 is a high performance, fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This effective matting agent is suitable for pigmented coatings. Due to the remarkable suspension behavior, ACEMATT® OK 412 is particularly suitable for clear coatings and other non-pigmented systems. The physical properties of this product makes it an all-purpose matting agent which obtains films with excellent surface smoothness. verkürzen | Request Sample |
| ACEMATT® OK 500 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 500 is a high performance, fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This product is suitable for pigmented and non-pigmented systems, and due to the excellent suspension...weiterlesen ACEMATT® OK 500 is a high performance, fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This product is suitable for pigmented and non-pigmented systems, and due to the excellent suspension behavior, it is particularly applicable in clear coatings. The physical properties of ACEMATT® OK 500 makes it an all-purpose matting agent which obtains superior surface smoothness on films. verkürzen | Request Sample |
| ACEMATT® OK 520 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® Matting agents are high performance silica developed for a variety of applications in Paints and Coatings. ACEMATT® OK 520 is an easily dispersible, organically treated matting agent suitable for general applications. This matting agent allows ex...weiterlesen ACEMATT® Matting agents are high performance silica developed for a variety of applications in Paints and Coatings. ACEMATT® OK 520 is an easily dispersible, organically treated matting agent suitable for general applications. This matting agent allows exceptional surface characteristics with excellent slip-effect, also in pigmented coatings. As a result of its outstanding suspension behavior, it is especially suitable for use in clear coats. verkürzen | Request Sample |
| ACEMATT® OK 607 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 607 is a high performance, very fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This matting agent is suitable for pigmented, as well as non-pigmented systems. ACEMATT® OK 607 ...weiterlesen ACEMATT® OK 607 is a high performance, very fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This matting agent is suitable for pigmented, as well as non-pigmented systems. ACEMATT® OK 607 provides a high sheen, 85° reflectometer value, and is very suitable for thin-film coatings. Due to the suspension behavior, it is also particularly applicable in clear coatings which obtains films with the highest surface smoothness. verkürzen | Request Sample |
| ACEMATT® OK 607 LC | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 607 LC is a very fine-grained wax after-treated precipitated silica. It is mainly used as a high-purity filler for e-coats due to its outstanding suspension behaviour and low electrical conductivity. | Request Sample |
| ACEMATT® OK 900 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 900 is a highly efficient, medium particle-sized, wax-treated precipitated silica. It is especially recommended for coil coatings as well as general industrial coatings. | Request Sample |
| ACEMATT® TS 100 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® TS 100 is a high performance matting agent adding versatility to your nail polish formulations. Only low levels of addition give a matt or crackle finish. The product, which is a fumed silica is listed with the INCI name 'Silica'. | Request Sample |
| Acetine 51035 | Rhein Chemie Rheinau GmbH | Acetine 51035 is glycerol triacetate appearing as a clear liquid. This acetate ester functions as a solvent and plasticizer in inks and printing inks. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...weiterlesen Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. verkürzen | |
| ACURE™ 500 | Allnex | ACURE™ 500 is the first generation of blocked catalyst used in ACURE™ systems. ACURE™ 500 consists of a strong base which is blocked with di-ethyl carbonate. ACURE™ 500 unblocks with the release of alcohol and CO2 and is the key enabler to the provision o...weiterlesen ACURE™ 500 is the first generation of blocked catalyst used in ACURE™ systems. ACURE™ 500 consists of a strong base which is blocked with di-ethyl carbonate. ACURE™ 500 unblocks with the release of alcohol and CO2 and is the key enabler to the provision of fast dry times with long pot lives in ACURE™ coatings. The rate at which ACURE™ 500 unblocks may be controlled by the addition of an alcohol (typically ethanol, n-propanol, or n-butanol) to the ACURE™ coating. verkürzen | Request Sample |
| ADDAPT® Anticor™ A40 | ADDAPT Chemicals BV | ADDAPT® Anticor™ A40 is a proprietary blend of polyhydroxy amides. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is completely soluble in water, biodegr...weiterlesen ADDAPT® Anticor™ A40 is a proprietary blend of polyhydroxy amides. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is completely soluble in water, biodegradable, and is not restricted by the hardness of the water. verkürzen | |
| ADDAPT® Anticor™ A65N | ADDAPT Chemicals BV | ADDAPT® Anticor™ A65N is a proprietary blend of organic acids salts and silanes. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product controls the amount of pi...weiterlesen ADDAPT® Anticor™ A65N is a proprietary blend of organic acids salts and silanes. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product controls the amount of pitting on the metal surface, is biodegradable, and is not restricted by the hardness of the water. verkürzen | |
| ADDAPT® Anticor™ A84 | ADDAPT Chemicals BV | ADDAPT® Anticor™ A84is a proprietary blend of organic acid salts and silanes. It is used as a multi-metal anti-corrosion additive and helps control the pitting on the metal surface. This product is biodegradable, completely soluble in water, and not restr...weiterlesen ADDAPT® Anticor™ A84is a proprietary blend of organic acid salts and silanes. It is used as a multi-metal anti-corrosion additive and helps control the pitting on the metal surface. This product is biodegradable, completely soluble in water, and not restricted by the hardness of the water. It is used in coatings, printing inks, lubricants, textile fluids, and cleaners. verkürzen | |
| ADDAPT® Anticor™ L 4783 | ADDAPT Chemicals BV | ADDAPT® Anticor™ L 4783 is a proprietary blend of polyhydroxycarbonate and silanes. It is used as a multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is non-foaming, biodegradable, solub...weiterlesen ADDAPT® Anticor™ L 4783 is a proprietary blend of polyhydroxycarbonate and silanes. It is used as a multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is non-foaming, biodegradable, soluble in water, and is not restricted by the hardness of water. verkürzen | |
| ADDAPT® AS 400 | ADDAPT Chemicals BV | ADDAPT® AS 400 is an acrylic copolymer based emulsion in water. It is used as an emulsion rheology modifier in paints, adhesives, printing inks, and paper coatings. | |
| ADDAPT® BioWet™ 200R | ADDAPT Chemicals BV | ADDAPT® BioWet™ 200R is a polyhydroxy amide in water. It is used as a compatibilizer and pigment dispersant in coatings and printing inks. This product is solvent-free, biodegradable, non-foaming, and improves pigment grinding. | |
| ADDAPT® BioWet™ 25 | ADDAPT Chemicals BV | ADDAPT® BioWet™ is a polyhydroxy amide in water. It is used as a solvent-free wetting agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is non-foaming, biodegradable, and it improves pigment grinding. | |
| ADDAPT® BioWet™ 35 | ADDAPT Chemicals BV | ADDAPT® BioWet™ 35 is a blend of polyalkylene glycols, dispersants, and polyhydroxy amide. It is used as a wetting/leveling agent in paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is biodegradable, solvent-free, no...weiterlesen ADDAPT® BioWet™ 35 is a blend of polyalkylene glycols, dispersants, and polyhydroxy amide. It is used as a wetting/leveling agent in paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is biodegradable, solvent-free, non-foaming, and it improves pigment grinding. verkürzen | |
| ADDAPT® BioWet™ 45 | ADDAPT Chemicals BV | ADDAPT® BioWet™ is a blend of polyalkylene glycols and polyhydroxy amide. It is used as a wetting/leveling agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is solvent-free, biodegradable, and it improves pi...weiterlesen ADDAPT® BioWet™ is a blend of polyalkylene glycols and polyhydroxy amide. It is used as a wetting/leveling agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is solvent-free, biodegradable, and it improves pigment grinding. verkürzen | |
| ADDAPT® BioWet™ 450C | ADDAPT Chemicals BV | ADDAPT® BioWet™ 450C is a proprietary blend of polyalkylene glycols in water and surface-active compounds. It is used as a VOC-free wetting agent in paints, coatings, adhesives, printing inks, and cleaning agents. This product is biodegradable, low-foamin...weiterlesen ADDAPT® BioWet™ 450C is a proprietary blend of polyalkylene glycols in water and surface-active compounds. It is used as a VOC-free wetting agent in paints, coatings, adhesives, printing inks, and cleaning agents. This product is biodegradable, low-foaming, completely soluble in water, and improves pigment grinding. verkürzen | |
| ADDAPT® BioWet™ 60G | ADDAPT Chemicals BV | ADDAPT® BioWet™ 60G is a proprietary blend of polyalkylene glycols and polyhydroxy amide. It is used as a solvent-free glass adhesion promoter and glass corrosion inhibitor. This product is used in coatings, printing inks, and cleaning agents. BioWet 60G ...weiterlesen ADDAPT® BioWet™ 60G is a proprietary blend of polyalkylene glycols and polyhydroxy amide. It is used as a solvent-free glass adhesion promoter and glass corrosion inhibitor. This product is used in coatings, printing inks, and cleaning agents. BioWet 60G is non-foaming, biodegradable, and completely soluble in water. verkürzen | |
| ADDAPT® BioWet™ 75 | ADDAPT Chemicals BV | ADDAPT® BioWet™ 75 is a polyhydroxy amide in water. It is used as a biodegradable wetting and leveling agent for coatings, lacquers, printing inks, adhesives, and cleaning agents. This product is non-foaming, improves pigment grinding, and has anti-corros...weiterlesen ADDAPT® BioWet™ 75 is a polyhydroxy amide in water. It is used as a biodegradable wetting and leveling agent for coatings, lacquers, printing inks, adhesives, and cleaning agents. This product is non-foaming, improves pigment grinding, and has anti-corrosion properties. verkürzen | |
| ADDAPT® CODIS™ 95 | ADDAPT Chemicals BV | ADDAPT® CODIS™ 95 is a proprietary blend of alkanol-amines in water. It is used as a co-dispersant for mineral pigments, fillers, colorants, and solvent based alkyd paints. This product contributes to pH stability and provides high gloss, water resistance...weiterlesen ADDAPT® CODIS™ 95 is a proprietary blend of alkanol-amines in water. It is used as a co-dispersant for mineral pigments, fillers, colorants, and solvent based alkyd paints. This product contributes to pH stability and provides high gloss, water resistance, and anti-corrosion properties. verkürzen | |
| ADDAPT® DISP™ 400 | ADDAPT Chemicals BV | ADDAPT® DISP™ 400 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows high pigment loading at a low viscosity. This product has applications in pai...weiterlesen ADDAPT® DISP™ 400 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, paper coatings, and concrete. verkürzen | |
| ADDAPT® DISP™ 500 | ADDAPT Chemicals BV | ADDAPT® DISP™ 500 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications...weiterlesen ADDAPT® DISP™ 500 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, paper coatings, and concrete. verkürzen | |
| ADDAPT® DISP™ 600 | ADDAPT Chemicals BV | ADDAPT® DISP™ 600 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for titanium dioxide, mineral pigments, fillers, colorants, and reactive pigments. This product is used in paint, printing in...weiterlesen ADDAPT® DISP™ 600 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for titanium dioxide, mineral pigments, fillers, colorants, and reactive pigments. This product is used in paint, printing ink, adhesives, paper coatings, and concrete. verkürzen | |
| ADDAPT® DISP™ 800 | ADDAPT Chemicals BV | ADDAPT® DISP™ 800 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in...weiterlesen ADDAPT® DISP™ 800 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, textiles, and concrete. verkürzen | |
| ADDAPT® DISP™ 900 | ADDAPT Chemicals BV | ADDAPT® DISP™ 900 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications...weiterlesen ADDAPT® DISP™ 900 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, textiles, and concrete. verkürzen | |
| ADDAPT® Foamstop™ 100N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 100N is a proprietary blend of polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is a light yellow liquid and is completely soluble in water, usab...weiterlesen ADDAPT® Foamstop™ 100N is a proprietary blend of polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is a light yellow liquid and is completely soluble in water, usable over a wide pH range, biodegradable, and it does not contain mineral oil, amines, nitrates, or fluorides. verkürzen | |
| ADDAPT® Foamstop™ 150N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 150N is a proprietary blend of polyacrylates, PAGs, and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is biodegradable, completely soluble in water, and is effective ...weiterlesen ADDAPT® Foamstop™ 150N is a proprietary blend of polyacrylates, PAGs, and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is biodegradable, completely soluble in water, and is effective over a wide pH range. verkürzen | |
| ADDAPT® Foamstop™ 200N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 200N is a proprietary blend of esters and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, effective over a wide pH range, and biodegrada...weiterlesen ADDAPT® Foamstop™ 200N is a proprietary blend of esters and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, effective over a wide pH range, and biodegradable. verkürzen | |
| ADDAPT® Foamstop™ 400F | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 400F is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over...weiterlesen ADDAPT® Foamstop™ 400F is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over a wide pH range, including extreme pH values (less than 3 or greater than 10). verkürzen | |
| ADDAPT® Foamstop™ 400N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 400N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over...weiterlesen ADDAPT® Foamstop™ 400N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over a wide pH range, including formulations with extreme pH values (less than 3 or greater than 10). verkürzen | |
| ADDAPT® Foamstop™ 600N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 600N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, effective over a w...weiterlesen ADDAPT® Foamstop™ 600N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, effective over a wide pH range, and it does not contain mineral oil, amines, nitrates, or fluorides. verkürzen | |
| ADDAPT® Foamstop™ 666K | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 666K is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, and is effective o...weiterlesen ADDAPT® Foamstop™ 666K is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, and is effective over a wide pH range and a high temperature range. verkürzen | |
| ADDAPT® Foamstop™ CC 11 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ CC 11 is a proprietary blend of activated fatty acids and fatty alcohols. It is used as a foam control agent for emulsions based on PVAC, VA/VEOVA, Styrene/Acrylics or pure Acrylics. This product has applications in adhesives, paint, pri...weiterlesen ADDAPT® Foamstop™ CC 11 is a proprietary blend of activated fatty acids and fatty alcohols. It is used as a foam control agent for emulsions based on PVAC, VA/VEOVA, Styrene/Acrylics or pure Acrylics. This product has applications in adhesives, paint, printing ink, floor polish, and waste-water treatment. verkürzen | |
| ADDAPT® Foamstop™ EM 19 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ EM 19 is an emulsion of surface active components and mineral oil in water. It is used as a foam control agent for emulsion systems based on PVAC, VA/VEOVA, Styrene/Acrylics, or pure Acrylics. This product has applications in adhesives, ...weiterlesen ADDAPT® Foamstop™ EM 19 is an emulsion of surface active components and mineral oil in water. It is used as a foam control agent for emulsion systems based on PVAC, VA/VEOVA, Styrene/Acrylics, or pure Acrylics. This product has applications in adhesives, paint, printing ink, floor polish, and waste-water treatment. verkürzen | |
| ADDAPT® Foamstop™ MP 33 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 33 is a proprietary blend of polyalkyleneglycols and siloxane based surface-active components. It is used as a foam control agent in paint, printing ink, PVC production, textiles, and lubricants. | |
| ADDAPT® Foamstop™ MP 51N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 51N is a proprietary blend of activated white oils. It is used as a foam control agent in low VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product has applications in paint, adhesives, printing ink, floor poli...weiterlesen ADDAPT® Foamstop™ MP 51N is a proprietary blend of activated white oils. It is used as a foam control agent in low VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product has applications in paint, adhesives, printing ink, floor polish, lubricants, and waste-water treatment. verkürzen | |
| ADDAPT® Foamstop™ MP 55 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 55 is a proprietary blend of siloxane based surface-active components. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is effective over a wide pH range an...weiterlesen ADDAPT® Foamstop™ MP 55 is a proprietary blend of siloxane based surface-active components. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is effective over a wide pH range and is used in paint, printing ink, PVC production, textiles, and lubricants. verkürzen | |
| ADDAPT® Foamstop™ MP 72 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 72 is a proprietary blend of synthetic ester, biodegradable polyalkylene glycols and a small amount of aliphatic alcohols. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This ...weiterlesen ADDAPT® Foamstop™ MP 72 is a proprietary blend of synthetic ester, biodegradable polyalkylene glycols and a small amount of aliphatic alcohols. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This product is used in paint, adhesives, printing inks, floor polish, lubricants, and waste-water treatment. verkürzen | |
| ADDAPT® Foamstop™ MP 92 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 92 is a proprietary blend of polyalkylene glycols and siloxane based surface-active components. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is effectiv...weiterlesen ADDAPT® Foamstop™ MP 92 is a proprietary blend of polyalkylene glycols and siloxane based surface-active components. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is effective over a wide pH range and is used in paint, printing ink, PVC production, food processing, and lubricants. verkürzen | |
| ADDAPT® Foamstop™ SL 10 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 10 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is a milky white liquid tha...weiterlesen ADDAPT® Foamstop™ SL 10 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is a milky white liquid that is easily emulsifiable and is used in paint, printing ink, adhesives, and sewage treatment, among other applications. verkürzen | |
| ADDAPT® Foamstop™ SL 100 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 100 is a silicone compound containing minerals. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product disperses easily and is used in paint, printing ink, cuttin...weiterlesen ADDAPT® Foamstop™ SL 100 is a silicone compound containing minerals. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product disperses easily and is used in paint, printing ink, cutting oils, and epoxy resin systems. verkürzen | |
| ADDAPT® Foamstop™ SL 30 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 30 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is used in paint, printing ...weiterlesen ADDAPT® Foamstop™ SL 30 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is used in paint, printing ink, adhesives, and sewage treatment, among other applications. verkürzen | |
| ADDAPT® Foamstop™ VF 10N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ VF 10N is a proprietary blend of components based on renewable resources. It is used as a VOC-free foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics and pure Acrylics. This product is used in paint, adhesives, prin...weiterlesen ADDAPT® Foamstop™ VF 10N is a proprietary blend of components based on renewable resources. It is used as a VOC-free foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics and pure Acrylics. This product is used in paint, adhesives, printing ink, floor polish, lubricants, and waste-water treatment. verkürzen | |
| ADDAPT® Foamstop™ WS 17 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ WS 17 is a proprietary blend of polyalkylene glycols and surface-active components. It is a biodegradable foam control agent designed for formulations with extreme pH values. This product is completely water soluble and is used in paint,...weiterlesen ADDAPT® Foamstop™ WS 17 is a proprietary blend of polyalkylene glycols and surface-active components. It is a biodegradable foam control agent designed for formulations with extreme pH values. This product is completely water soluble and is used in paint, printing ink, floor polish, and other applications. verkürzen | |
| ADDAPT® PolySurF™ ACE | ADDAPT Chemicals BV | ADDAPT® PolySurF™ ACE is the acrylic acid adduct of the epoxy ester of versatic acid. It is used as a solvent free additive in paints, lacquers, printing inks, and adhesives to provide benefits such as acid resistance, high gloss, pigment wetting, and UV ...weiterlesen ADDAPT® PolySurF™ ACE is the acrylic acid adduct of the epoxy ester of versatic acid. It is used as a solvent free additive in paints, lacquers, printing inks, and adhesives to provide benefits such as acid resistance, high gloss, pigment wetting, and UV stability. verkürzen | |
| ADDAPT® PolySurF™ HP | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HP is a proprietary mixture of methacrylated mono-phosphate and bi-phosphate esters. It is used as a solvent-free UV-curable additive, adhesion promoter, and flame retardant. This product has applications in paints, lacquers, printing in...weiterlesen ADDAPT® PolySurF™ HP is a proprietary mixture of methacrylated mono-phosphate and bi-phosphate esters. It is used as a solvent-free UV-curable additive, adhesion promoter, and flame retardant. This product has applications in paints, lacquers, printing inks, and adhesives. verkürzen | |
| ADDAPT® PolySurF™ HPH | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPH is a proprietary mixture of methacrylated mono-phosphate and di-phosphate esters. It is used as a solvent-free UV-curable additive in paints, lacquers, printing inks, and adhesives. This product also improves the adhesion to metal an...weiterlesen ADDAPT® PolySurF™ HPH is a proprietary mixture of methacrylated mono-phosphate and di-phosphate esters. It is used as a solvent-free UV-curable additive in paints, lacquers, printing inks, and adhesives. This product also improves the adhesion to metal and has flame retardant properties. verkürzen | |
| ADDAPT® PolySurF™ HPL | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPL is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent-free UV-curable additive, adds leveling and wetting properties, acts as a flame retardant, and improves adhesion to metal. This p...weiterlesen ADDAPT® PolySurF™ HPL is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent-free UV-curable additive, adds leveling and wetting properties, acts as a flame retardant, and improves adhesion to metal. This product is used in paints, lacquers, printing inks, and adhesives. verkürzen | |
| ADDAPT® PolySurF™ HPm | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPm is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent free UV-curable additive and acts as an effective flame retardant while also promoting adhesion to metal, glass, and concrete.Thi...weiterlesen ADDAPT® PolySurF™ HPm is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent free UV-curable additive and acts as an effective flame retardant while also promoting adhesion to metal, glass, and concrete.This product is used in paints, lacquers, printing inks, and adhesives. verkürzen | |
| ADDAPT® WaxMul™ C 125 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ C 125 is an emulsion based on T1-type carnauba wax in water. It is used to improve scratch resistance, repel water, and improve the release and anti-block properties. This product is used in paints, floor, car, and leather polishes, and pr...weiterlesen ADDAPT® WaxMul™ C 125 is an emulsion based on T1-type carnauba wax in water. It is used to improve scratch resistance, repel water, and improve the release and anti-block properties. This product is used in paints, floor, car, and leather polishes, and printing inks. verkürzen | |
| ADDAPT® WaxMul™ C 325 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ C 325 is an emulsion based on T3-type carnauba wax in water. It is used to improve scratch resistance, lubrication, as well as the release and anti-block properties. This product is used in floor, car, and leather polishes, paints, and pri...weiterlesen ADDAPT® WaxMul™ C 325 is an emulsion based on T3-type carnauba wax in water. It is used to improve scratch resistance, lubrication, as well as the release and anti-block properties. This product is used in floor, car, and leather polishes, paints, and printing inks. verkürzen | |
| ADDAPT® WaxMul™ WM 110 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 110 in paints, printing inks, leather polishes, and paper coatings to improve water resistance and surface smoothness. | |
| ADDAPT® WaxMul™ WM 25 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 25 is an emulsion of polyethylene wax in water. It is used in paints, printing inks, and paper coatings. This product provides high abrasion resistance, improves wet scrub resistance, helps retain gloss, improves dry rub, and is suitabl...weiterlesen ADDAPT® WaxMul™ WM 25 is an emulsion of polyethylene wax in water. It is used in paints, printing inks, and paper coatings. This product provides high abrasion resistance, improves wet scrub resistance, helps retain gloss, improves dry rub, and is suitable as a slip agent for over print varnishes. verkürzen | |
| ADDAPT® WaxMul™ WM 35 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 35 is an emulsion of polyethylene wax in water. It is used in paints, printing inks, floor polishes, and paper coatings. This product improves abrasion resistance and wet scrub resistance. | |
| ADDAPT® WaxMul™ WM 45 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 45 is an emulsion of polypropylene wax in water. It is used in floor polishes, printing inks, and paints. This product has a high melting point, and it improves abrasion resistance, wet scrub resistance, surface hardness, and blocking r...weiterlesen ADDAPT® WaxMul™ WM 45 is an emulsion of polypropylene wax in water. It is used in floor polishes, printing inks, and paints. This product has a high melting point, and it improves abrasion resistance, wet scrub resistance, surface hardness, and blocking resistance. verkürzen | |
| Addaptol™ DB | ADDAPT Chemicals BV | Addaptol™ DB is a proprietary mixture of branched esters of dibasic acids. It is a biodegradable, oxygenated solvent used in waterborne systems as a coalescing agent and in solvent borne systems as a tail solvent. When compared to 2,2,4-Trimethylpentanedi...weiterlesen Addaptol™ DB is a proprietary mixture of branched esters of dibasic acids. It is a biodegradable, oxygenated solvent used in waterborne systems as a coalescing agent and in solvent borne systems as a tail solvent. When compared to 2,2,4-Trimethylpentanediol mono-isobutyrate, Addaptol™ DB has less odor, improved wet scrub resistance, and improved leveling and pinhole resistance. verkürzen | |
| ADDID® 900 | Evonik Operations GmbH, BL Coating Additives | ADDID® 900 is a diamino-functional trimethoxy silane adhesion promoter. It promotes adhesion on surfaces of siliceous, oxidic, metallic and ceramic nature. With this product excellent adhesion can be obtained on substrates like aluminum, glass, steel, pla...weiterlesen ADDID® 900 is a diamino-functional trimethoxy silane adhesion promoter. It promotes adhesion on surfaces of siliceous, oxidic, metallic and ceramic nature. With this product excellent adhesion can be obtained on substrates like aluminum, glass, steel, plastics and paper. Due to ADDID® 900's improved adhesion on pigment and fillers, improvements in pigment wetting, particle aggregation, and a reduction of sedimentation can be obtained. This results in improvements in the optical (e.g. gloss) and mechanical properties (e.g. resistance under wet conditions). verkürzen | Request Sample |
| ADDID® 911 | Evonik Operations GmbH, BL Coating Additives | ADDID® 911 is an adhesion promoter for solventborne and waterborneprimers and coating formulations. It is based on an epoxy-functional silane. | Request Sample |
| Additivo NS | Ichemco | Additivo NS is a titanium chelate in a solvent solution. This product is most commonly used to improve thermal resistance in Color Ink NS coated polyethylene film applications. | |
| ADDITOL® BDK | Allnex | ADDITOL® BDK is a general-purpose radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. ...weiterlesen ADDITOL® BDK is a general-purpose radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. With exposure to UV light, ADDITOL® BDK undergoes a photochemical reaction that generates radicals. verkürzen | Request Sample |
| ADDITOL® CPK | Allnex | ADDITOL® CPK is a radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. With exposure to...weiterlesen ADDITOL® CPK is a radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. With exposure to UV light, ADDITOL® CPK undergoes a photochemical reaction that generates radicals. These radicals will initiate polymerization through the unsaturated groups present in the system. Suggested applications for ADDITOL® CPK include: paper upgrading, wood top-coats, hard-coats for plastics, overprint varnishes, vinyl flooring, metal coatings, exterior applications, general coating applications where low yellowing is critical, and inks and pigmented coatings (in combination with other photoinitiators). verkürzen | Request Sample |
| ADDITOL® dry CF100 | Allnex | ADDITOL® dry CF100 - drier/dryer/siccative - is a ready to use, universal Cobalt replacement drier designed to have excellent compatibility and fast incorporation in all solvent borne and waterborne alkyd paints. It is based on twin accelerated Manganese. | Request Sample |
| ADDITOL® dry CF103 | Allnex | ADDITOL® Dry CF103 is a cobalt free (Co-free) accelerated primary drier based on Manganese (Mn). High performance set and through drying in alkyd paints, stains, natural oils and printing inks. Universal compatible in solvent borne (SB) and water based (W...weiterlesen ADDITOL® Dry CF103 is a cobalt free (Co-free) accelerated primary drier based on Manganese (Mn). High performance set and through drying in alkyd paints, stains, natural oils and printing inks. Universal compatible in solvent borne (SB) and water based (WB) oxidative drying systems. Allows leveling without strong wrinkling tendency. Solvent free, ultra low VOC, high flash point (FP) for high handling safety. Long lasting drying performance with strongly reduces loss of dry effect. verkürzen | Request Sample |
| ADDITOL® dry CF200 | Allnex | ADDITOL® Dry CF200 contains a balanced auxiliary drier metal combination which optimizes oxidative drying in waterborne alkyd formulations. It is recommended to be used together with Cobalt free primary driers ADDITOL® Dry CF 100 or ADDITOL® Dry CF 101 fo...weiterlesen ADDITOL® Dry CF200 contains a balanced auxiliary drier metal combination which optimizes oxidative drying in waterborne alkyd formulations. It is recommended to be used together with Cobalt free primary driers ADDITOL® Dry CF 100 or ADDITOL® Dry CF 101 for all oxidative drying waterborne alkyd resin paints. verkürzen | Request Sample |
| ADDITOL® dry CF300 | Allnex | ADDITOL® Dry CF300 contains a balanced auxiliary drier metal combination which optimizes oxidative drying in waterborne and solventborne alkyd formulations.. It is recommended to be used together with Cobalt free primary driers ADDITOL® Dry CF 100 for all...weiterlesen ADDITOL® Dry CF300 contains a balanced auxiliary drier metal combination which optimizes oxidative drying in waterborne and solventborne alkyd formulations.. It is recommended to be used together with Cobalt free primary driers ADDITOL® Dry CF 100 for all oxidative drying waterborne alkyd resin paints. verkürzen | Request Sample |
| ADDITOL® HDMAP | Allnex | ADDITOL® HDMAP is a general-purpose radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters...weiterlesen ADDITOL® HDMAP is a general-purpose radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. With exposure to UV light, ADDITOL® HDMAP undergoes a photochemical reaction that generates radicals. These radicals will initiate polymerization through the unsaturated groups present in the system. Suggested applications for ADDITOL® HDMAP include: clear coats for metal and plastics, wood top-coats, overprint varnishes, paper upgrading, and inks and pigmented coatings (in combination with other photoinitiators). verkürzen | Request Sample |
| ADDITOL® ITX | Allnex | ADDITOL® ITX is used as a radical photoinitiator in UV inks and coatings. In combination with amine co-initiators or alpha cleavage photoinitiators, ADDITOL ITX is used in formulations containing unsaturated materials such as acrylates, methacrylates, vin...weiterlesen ADDITOL® ITX is used as a radical photoinitiator in UV inks and coatings. In combination with amine co-initiators or alpha cleavage photoinitiators, ADDITOL ITX is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. With exposure to UV light, ADDITOL ITX undergoes a photochemical reaction that generates radicals. These radicals will initiate polymerization through the unsaturated groups present in the system. ADDITOL ITX is particularly suited to the curing of inks and pigmented coatings. In combinations with tertiary amine co-initiators such as EBECRYL® P104, EBECRYL P115, EBECRYL 7100 or MDEA, ADDITOL ITX provides good through cure along with surface cure. ADDITOL ITX is also effective as a sensitizer for alpha cleavage photoinitiators such as ADDITOL DMMTA. verkürzen | Request Sample |
| ADDITOL® MBF | Allnex | ADDITOL® MBF is a radical photoinitiator exhibiting very good surface cure. It can be used alone or in combination with other photoinitiators in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturared polyest...weiterlesen ADDITOL® MBF is a radical photoinitiator exhibiting very good surface cure. It can be used alone or in combination with other photoinitiators in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturared polyesters. With exposure to UV light, ADDITOL® MBF undergoes a photochemical reaction that generates radicals. These radicals will initiate polymerization through the unsaturated groups present in the system. verkürzen | Request Sample |
| ADDITOL® P 791 | Allnex | ADDITOL® P 791 is a solid aliphatic polyanhydride hardener for use with solid acrylic resins containing glycidyl groups to manufacture powder coatings. The binder ratio is dependent on the equivalent weight of the glycidyl functional resin employed. | Request Sample |
| ADDITOL® P 824 | Allnex | ADDITOL® P 824 is a 15% active flow promoter masterbatch on an outdoor resistant hydroxylated polyester matrix that can be used in the manufacture of powder coatings. An addition of 3-5%, by weight to a powder coating formulation increases gloss and is co...weiterlesen ADDITOL® P 824 is a 15% active flow promoter masterbatch on an outdoor resistant hydroxylated polyester matrix that can be used in the manufacture of powder coatings. An addition of 3-5%, by weight to a powder coating formulation increases gloss and is compatible with nearly all powder coating systems. verkürzen | Request Sample |
