| ACMO | Rahn AG | ACMO is an acryloyl morpholine. It is a resin for radically curable inks, coatings and adhesives. The product can be described as having low odor, good abrasion and solvent resistance, water soluble and good adhesion properties. The product improves the a...weiterlesen ACMO is an acryloyl morpholine. It is a resin for radically curable inks, coatings and adhesives. The product can be described as having low odor, good abrasion and solvent resistance, water soluble and good adhesion properties. The product improves the adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. ACMO can be applied to the following applications: screen inks and varnishes; plastic coatings; laminating adhesives; printed circuit boards; and industrial coatings. verkürzen | Request Sample |
| Bisomer® BZMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This...weiterlesen Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This product has a methoxyhydroquinone content of 50 ± 5ppm, an acid number of < 0.02mg KOH/g, and a refractive index @ 20°C of 1.51. It can be used as a co-monomer in PMMA based acrylic formulations to increase the impact resistance, hydrophobicity and structural integrity of resins, composites and coatings. It is also particularly useful as a replacement for styrene in unsaturated polyester and vinyl ester resins used in a wide range of applications including chemical fixings and composites. Due to its high refractive index, Bisomer® BZMA is also suitable for cast lenses, optical fibres, transparent laminates and other applications where clarity is a key requirement. verkürzen | |
| Bisomer® PPA 6 | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has a...weiterlesen Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has an acid numer of < 0.3mg KOH/g, a saponification value of 126-138mg KOH/g, a volatile components pf 0.5% max., and a molecular weight of 420g/mol. Bisomer® PPA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. This product is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and polyurethane dispersions (PUDs). It is also used in more traditional acrylic polyols for surface coatings. verkürzen | |
| DMAA | Rahn AG | DMAA is a reactive diluent for radically curable inks, coatings and adhesives. Its properties can be summarized as follows: low viscosity, very good optical clarity, water soluble and very good moisture vapor transition rate. It also offers very good oxyg...weiterlesen DMAA is a reactive diluent for radically curable inks, coatings and adhesives. Its properties can be summarized as follows: low viscosity, very good optical clarity, water soluble and very good moisture vapor transition rate. It also offers very good oxygen penetration and water holding capacity. DMAA and its homopolymers are water soluble. verkürzen | Request Sample |
| DPGDA | Allnex | DPGDA (Dipropylene Glycol Diacrylate) is a difunctional reactive diluent that polymerizes when exposed to sources of free radicals. DPGDA is particularly useful in coatings and inks where improved flexibility and adhesion are desired in combination with g...weiterlesen DPGDA (Dipropylene Glycol Diacrylate) is a difunctional reactive diluent that polymerizes when exposed to sources of free radicals. DPGDA is particularly useful in coatings and inks where improved flexibility and adhesion are desired in combination with good moisture resistance. verkürzen | Request Sample |
| EBECRYL® 110 | Allnex | EBECRYL® 110 is a monofunctional reactive diluent characterized by low viscosity and relatively low odor. It is used in ultraviolet light (UV) or electron beam (EB) cured coatings to control viscosity and increase flexibility. Suggested applications for E...weiterlesen EBECRYL® 110 is a monofunctional reactive diluent characterized by low viscosity and relatively low odor. It is used in ultraviolet light (UV) or electron beam (EB) cured coatings to control viscosity and increase flexibility. Suggested applications for EBECRYL® 110 include: coatings and screen inks on flexible and semi-rigid plastics including polyolefins, optical fiber coatings, and high refractive index coatings. verkürzen | Request Sample |
| EBECRYL® 113 | Allnex | EBECRYL® 113 is a low odour aliphatic monofunctional diluting acrylate. It is recommended for use in ultraviolet light (UV) or electron beam (EB) curable coatings to increase flexibility and improve adhesion to plastics. | Request Sample |
| EBECRYL® 130 | Allnex | EBECRYL® 130 is a cyclic aliphatic diacrylate useful as a reactive diluent in UV (ultra violet) or EB (electron beam) curable coatings and inks. It can impart a combination of hardness, toughness, and resiliency coupled with improved adhesion properties o...weiterlesen EBECRYL® 130 is a cyclic aliphatic diacrylate useful as a reactive diluent in UV (ultra violet) or EB (electron beam) curable coatings and inks. It can impart a combination of hardness, toughness, and resiliency coupled with improved adhesion properties on various substrates. It is recommended for use in: scratch and abrasion resistant coatings, coatings requiring increased thermal resistance, and inkjet inks. verkürzen | Request Sample |
| EBECRYL® 140 | Allnex | EBECRYL® 140 is a reactive diluent that is compatible with a wide range of acrylated resins used in UV/EB curing applications. Effective levels of EBECRYL® 140 typically range from 10% to 30%, depending on the application. In lithographic inks and varnish...weiterlesen EBECRYL® 140 is a reactive diluent that is compatible with a wide range of acrylated resins used in UV/EB curing applications. Effective levels of EBECRYL® 140 typically range from 10% to 30%, depending on the application. In lithographic inks and varnishes it is quite effective in adjusting viscosity while maintaining or improving cure response and physical properties. verkürzen | Request Sample |
| EBECRYL® 160 | Allnex | EBECRYL® 160 is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. It can be used to impart crosslinking to energy curable coatings and inks while maintaining a degree of flexibility and tou...weiterlesen EBECRYL® 160 is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. It can be used to impart crosslinking to energy curable coatings and inks while maintaining a degree of flexibility and toughness. Of the common triacrylate diluents used in energy curable formulations, EBECRYL® 160 exhibits the highest reactivity and the greatest viscosity reduction of oligomers. EBECRYL® 160 is a reactive diluent compatible with a wide range of acrylated resins used in UV/EB curing applications. Hardness, abrasion resistance, and high gloss properties make EBECRYL®160 popular for overprint varnishes, inks, coatings and electronic applications such as photoresists. verkürzen | Request Sample |
| EBECRYL® 7100 | Allnex | EBECRYL® 7100 is an acrylate functional oligomeric amine resin generally used as an additive or diluent for more viscous oligomers. When used in formulations with a photoabstraction type photoinitiator (e.g. benzophenone), EBECRYL® 7100 has an acceleratin...weiterlesen EBECRYL® 7100 is an acrylate functional oligomeric amine resin generally used as an additive or diluent for more viscous oligomers. When used in formulations with a photoabstraction type photoinitiator (e.g. benzophenone), EBECRYL® 7100 has an accelerating effect on the UV cure speed. It is recommended for: coatings for paper and plastics, overprint varnishes, screen inks, and wood topcoats. verkürzen | Request Sample |
| EBECRYL® 780 | Allnex | EBECRYL® 780 is a highly functional, carboxylic acid containing methacrylate oligomer diluted in 2-methoxy-1-propanol solvent. EBECRYL® 780 exhibits good cure speed, good gloss characteristics, low shrinkage and good adhesion to metal. It is especially su...weiterlesen EBECRYL® 780 is a highly functional, carboxylic acid containing methacrylate oligomer diluted in 2-methoxy-1-propanol solvent. EBECRYL® 780 exhibits good cure speed, good gloss characteristics, low shrinkage and good adhesion to metal. It is especially suitable for use in the topcoat of vacuum metallized cosmetic and filmic applications. verkürzen | Request Sample |
| EBECRYL® 853 | Allnex | Ebecryl® 853 is a trifunctional low viscous diluting acrylate giving low odour after UV or EB curing and low extractables It is compatible with a wide range of acrylated resins.\r\nEbecryl®853 was designed to produce low irritant formulations and contains...weiterlesen Ebecryl® 853 is a trifunctional low viscous diluting acrylate giving low odour after UV or EB curing and low extractables It is compatible with a wide range of acrylated resins.\r\nEbecryl®853 was designed to produce low irritant formulations and contains less than 0.1 % TMPTA. verkürzen | Request Sample |
| EPODIL® 759 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...weiterlesen EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. verkürzen | Request Sample |
| GENOMER* 1121M | Rahn AG | GENOMER* 1121M is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: automotive coatings, coatings on metal and metallized substrates; coatings on plastics; coa...weiterlesen GENOMER* 1121M is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: automotive coatings, coatings on metal and metallized substrates; coatings on plastics; coatings on glass; adhesives; and polymerization and copolymerization in emulsions and solutions. verkürzen | Request Sample |
| GENOMER* 1122 | Rahn AG | GENOMER* 1122 is a monofunctional urethane acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: printing inks and varnishes for plastic foils; PVC flooring and foil coatings; ...weiterlesen GENOMER* 1122 is a monofunctional urethane acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: printing inks and varnishes for plastic foils; PVC flooring and foil coatings; laminating adhesives; and adhesives. verkürzen | Request Sample |
| GENOMER* 1122TF | Rahn AG | GENOMER* 1122TF is a monofunctional urethane acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: printing inks and varnishes for plastic foils; PVC flooring and foil coatings...weiterlesen GENOMER* 1122TF is a monofunctional urethane acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: printing inks and varnishes for plastic foils; PVC flooring and foil coatings; laminating adhesives; and adhesives. verkürzen | Request Sample |
| GENOMER* 1125 | Rahn AG | GENOMER* 1125 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings, and adhesives. This product is a monofunctional acrylate that imparts good adhesion, hardness and toughness to UV/EB-cured formulations. | Request Sample |
| GENOMER* 1226 | Rahn AG | GENOMER* 1126 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings, and adhesives. This product is a di-functional acrylate that exhibits low viscosity, low odor and good cutting power. | Request Sample |
| GENOMER* 1231 | Rahn AG | GENOMER* 1231 is a difunctional acrylate that imparts good adhesion, hardness and toughness to UV/EB-cured formulations. It offers excellent flexibility, excellent toughness, low yellowing, good heat resistance, and good chemical resistance. This product ...weiterlesen GENOMER* 1231 is a difunctional acrylate that imparts good adhesion, hardness and toughness to UV/EB-cured formulations. It offers excellent flexibility, excellent toughness, low yellowing, good heat resistance, and good chemical resistance. This product is recommended for coatings on metals and metallized substrates, coatings on glass, plastics, wood and paper, coatings on optical fiber, adhesives, electronics, and inks. verkürzen | Request Sample |
| HDDA | Allnex | HDDA (Hexanediol diacrylate) is a difunctional reactive diluent that is commonly used as a component of ultraviolet light (UV) and electron beam (EB) curable coatings and inks. HDDA is particularly useful in coatings and inks where improved elasticity, w...weiterlesen HDDA (Hexanediol diacrylate) is a difunctional reactive diluent that is commonly used as a component of ultraviolet light (UV) and electron beam (EB) curable coatings and inks. HDDA is particularly useful in coatings and inks where improved elasticity, weathering and adhesion are desired in combination with excellent water resistance. verkürzen | Request Sample |
| KOMERATE A099 | Green Chemical Co., Ltd. | KOMERATE A099 is a reactive diluent that polymerizes when exposed to sources of free radicals. | |
| Liquid NVC | BASF SE, Intermediates Division | Liquid NVC is a reactive diluent for radiation curing coating and inks. It is liquid at room temperature, has high cure speed, excellent viscosity reduction, excellent substrate wetting, and improves adhesion. | |
| LM7401 | Sartomer Americas | LM7401 is a monofunctional acrylated amine synergist for use in UV/LED and EB curing applications. | |
| MCURE® 206 | Sartomer Americas | MCURE® 206 is a new aliphatic acrylate monomer used as a high performance reactive diluent for 2K epoxy amine systems. It provides key benefits such as high diluting power, high gloss retention, good weatherability and fast cure. | |
| MCURE® 301 | Sartomer Americas | MCURE® 301 is an aliphatic acrylate monomer used as a high performance reactive diluent for 2K epoxy amine systems. It provides key benefits such as excellent viscosity reduction, high reactivity and good cure rate at low temperature. | |
| MCURE® 400 | Sartomer Americas | MCURE® 400 is an aliphatic acrylate monomer used as a high performance reactive diluent for 2K epoxy amine systems. It provides key benefits such as extremely fast cure particularly at low temperature, good chemical resistance ans high toughness. | |
| MIRAMER LR3130 | Rahn AG | MIRAMER LR3130 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. It is ideal for use in printing inks and varnishes, paper and board varnishes, wood and industrial coatings, plastic coatings and overpri...weiterlesen MIRAMER LR3130 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. It is ideal for use in printing inks and varnishes, paper and board varnishes, wood and industrial coatings, plastic coatings and overprint varnishes. verkürzen | Request Sample |
| MIRAMER M122 | Rahn AG | MIRAMER M122 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in adhesives, industrial coatings and plastic coatings. It exhibits low shrinkage, high flexibility, hi...weiterlesen MIRAMER M122 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in adhesives, industrial coatings and plastic coatings. It exhibits low shrinkage, high flexibility, high water resistance and good weather resistance. verkürzen | Request Sample |
| MIRAMER M130 | Rahn AG | MIRAMER M130 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: pressure sensitive adhesives; PVC flooring; paper varnishes; and screen ...weiterlesen MIRAMER M130 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: pressure sensitive adhesives; PVC flooring; paper varnishes; and screen inks. It is an excellent adhesion promoter due to its very low surface tension. verkürzen | Request Sample |
| MIRAMER M140 | Rahn AG | MIRAMER M140 is a polyether acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: adhesives; industrial coatings; flexo inks; screen inks; and gravure inks...weiterlesen MIRAMER M140 is a polyether acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: adhesives; industrial coatings; flexo inks; screen inks; and gravure inks. It exhibits low volatility, good flexibility, good adhesion and low shrinkage. verkürzen | Request Sample |
| MIRAMER M164 | Rahn AG | MIRAMER M164 is a polyether acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in adhesives, plastic coatings and metal varnishes. It exhibits high flexibility, good adhesion and low ...weiterlesen MIRAMER M164 is a polyether acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in adhesives, plastic coatings and metal varnishes. It exhibits high flexibility, good adhesion and low shrinkage. verkürzen | Request Sample |
| MIRAMER M166 | Rahn AG | MIRAMER M166 is a polyether acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in pressure sensitive adhesives, plastic coatings and metal varnishes. | Request Sample |
| MIRAMER M170 | Rahn AG | MIRAMER M170 is a 2-(2-ethoxyethoxy) ethylacrylate (EOEOEA). It is a reactive diluent for radically curable coatings and adhesives. The product has a high cutting power in combination with good reactivity. This product is recommended for use in the follow...weiterlesen MIRAMER M170 is a 2-(2-ethoxyethoxy) ethylacrylate (EOEOEA). It is a reactive diluent for radically curable coatings and adhesives. The product has a high cutting power in combination with good reactivity. This product is recommended for use in the following applications: pressure sensitive adhesives; printed circuit boards; metal, plastic and paper coatings; and PVC flooring. verkürzen | Request Sample |
| MIRAMER M200 | Rahn AG | MIRAMER M200 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; overprint varnishes; wood, plastic and indu...weiterlesen MIRAMER M200 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; overprint varnishes; wood, plastic and industrial coatings; and paper and board varnishes. The cured product provides outstanding weatherability. verkürzen | Request Sample |
| MIRAMER M210 | Rahn AG | MIRAMER M210 is a polyether diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in printing inks, metal varnishes and plastic coatings. | Request Sample |
| MIRAMER M216 | Rahn AG | MIRAMER M216 is a polyether diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in pressure sensitive adhesives, metal varnishes, plastic coatings, wood coatings and printing inks. | Request Sample |
| MIRAMER M220 | Rahn AG | MIRAMER M220 is a polyetherpolyol diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in printing inks and varnishes, overprint varnishes, wood and industrial coatings, plastic coati...weiterlesen MIRAMER M220 is a polyetherpolyol diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in printing inks and varnishes, overprint varnishes, wood and industrial coatings, plastic coatings and paper and board varnishes. Excellent reactivity and non yellowing is achieved with GENOCURE* MBF as a photoinitiator. verkürzen | Request Sample |
| MIRAMER M222 | Rahn AG | MIRAMER M222 is a polyetherpolyol diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in printing inks and varnishes, overprint varnishes, wood and industrial coatings, plastic coati...weiterlesen MIRAMER M222 is a polyetherpolyol diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in printing inks and varnishes, overprint varnishes, wood and industrial coatings, plastic coatings and paper and board varnishes. Excellent reactivity and non yellowing is achieved with GENOCURE* MBF as a photoinitiator. verkürzen | Request Sample |
| MIRAMER M240 | Rahn AG | MIRAMER M240 is an ethoxylated Bisphenol A diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It has good hardness and abrasion resistance, high gloss, high chemical resistance, and good adhesion. This product is reco...weiterlesen MIRAMER M240 is an ethoxylated Bisphenol A diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It has good hardness and abrasion resistance, high gloss, high chemical resistance, and good adhesion. This product is recommended for use in printing inks and varnishes, wood coatings, industrial coatings and electronics. verkürzen | Request Sample |
| MIRAMER M280 | Rahn AG | MIRAMER M280 is a polyethylenglycol 400 diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in adhesives, printing inks and varnishes, wood and industrial coatings, water soluble scr...weiterlesen MIRAMER M280 is a polyethylenglycol 400 diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in adhesives, printing inks and varnishes, wood and industrial coatings, water soluble screen inks and plastic coatings. Excellent reactivity and non-yellowing is achieved with GENOCURE* MBF as a photoinitiator. verkürzen | Request Sample |
| MIRAMER M282 | Rahn AG | MIRAMER M282 is a polyether diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in adhesives, plastic coatings and PVC flooring. It exhibits low volatility, high flexibility, good ad...weiterlesen MIRAMER M282 is a polyether diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in adhesives, plastic coatings and PVC flooring. It exhibits low volatility, high flexibility, good adhesion and good solvent resistance. verkürzen | Request Sample |
| MIRAMER M284 | Rahn AG | MIRAMER M284 is a polyether diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in printing inks, industrial coatings and wood coatings. | Request Sample |
| MIRAMER M286 | Rahn AG | MIRAMER M286 is a polyether diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It is water soluble, has high flexibility and exhibits low shrinkage. This product is recommended for use in adhesives, printing inks and ...weiterlesen MIRAMER M286 is a polyether diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It is water soluble, has high flexibility and exhibits low shrinkage. This product is recommended for use in adhesives, printing inks and industrial coatings. verkürzen | Request Sample |
| MIRAMER M300 | Rahn AG | MIRAMER M300 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: overprint varnishes; printing inks and varnishes; paper and board varnis...weiterlesen MIRAMER M300 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: overprint varnishes; printing inks and varnishes; paper and board varnishes; wood and industrial coatings; and plastic coatings. The cured product provides high crosslinked density and chemical resistance. verkürzen | Request Sample |
| MIRAMER M3130 | Rahn AG | MIRAMER M3130 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings, and adhesives. | Request Sample |
| MIRAMER M3190 | Rahn AG | MIRAMER M3190 is a polyetherpolyol triacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: paper and board varnishes; wood and industrial coatings; adhesi...weiterlesen MIRAMER M3190 is a polyetherpolyol triacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: paper and board varnishes; wood and industrial coatings; adhesives; and printing inks. verkürzen | Request Sample |
| MIRAMER M320 | Rahn AG | MIRAMER M320 is a polyetherpolyoltriacrylate. This product is recommended for use in the following applications: paper and board finishes; wood and industrial coatings; plastic coatings; printing inks and varnishes; and overprint varnishes. It is a reacti...weiterlesen MIRAMER M320 is a polyetherpolyoltriacrylate. This product is recommended for use in the following applications: paper and board finishes; wood and industrial coatings; plastic coatings; printing inks and varnishes; and overprint varnishes. It is a reactive diluent for radically curable inks, coatings and adhesives. Excellent reactivity and non-yellowing is achieved with GENOCURE* MBF as a photoinitiator. verkürzen | Request Sample |
| MIRAMER M340 | Rahn AG | MIRAMER M340 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: adhesives; wood and industrial coatings; metal varnishes; solder masks; ...weiterlesen MIRAMER M340 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: adhesives; wood and industrial coatings; metal varnishes; solder masks; and printing inks. verkürzen | Request Sample |
| MIRAMER M360 | Rahn AG | MIRAMER M360 is a polyetherpolyol triacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: paper and board varnishes; wood and industrial coatings; adhesiv...weiterlesen MIRAMER M360 is a polyetherpolyol triacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: paper and board varnishes; wood and industrial coatings; adhesives; printing inks; and printed circuit boards. verkürzen | Request Sample |
| MIRAMER M4004 | Rahn AG | MIRAMER M4004 is a polyetherpolyoltetraacrylate. This product is recommended for use in the following applications: offset inks and varnishes; letterpress inks and varnishes; flexo inks and varnishes; screen inks and varnishes; and paper, board and wood c...weiterlesen MIRAMER M4004 is a polyetherpolyoltetraacrylate. This product is recommended for use in the following applications: offset inks and varnishes; letterpress inks and varnishes; flexo inks and varnishes; screen inks and varnishes; and paper, board and wood coatings. It is used up to 70% in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. verkürzen | Request Sample |
| MIRAMER M410 | Rahn AG | MIRAMER M410 is a polyetherpolyol tetraacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: inks (flexo, gravure, offset, screen); paper, board, and wood ...weiterlesen MIRAMER M410 is a polyetherpolyol tetraacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: inks (flexo, gravure, offset, screen); paper, board, and wood coatings; solder masks; and plastic coatings. The product combines low reaction shrinkage with a high surface hardness. verkürzen | Request Sample |
| MIRAMER M600 | Rahn AG | MIRAMER M600 is a dipentaerythritol hexaacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; flexo inks and varnishes; screen i...weiterlesen MIRAMER M600 is a dipentaerythritol hexaacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; flexo inks and varnishes; screen inks and varnishes; and overprint varnishes. The cured product provides very high cross linked density and chemical resistance. It is used up to 70% in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. verkürzen | Request Sample |
| OTA 480 | Allnex | OTA-480 is a triacrylated reactive diluent based on a glycerol derivative. It exhibits low viscosity and good flexibility for a triacrylate and its high functionality contributes to good reactivity and hardness. | Request Sample |
| SR336 | Sartomer Americas | SR336 is a monofunctional aliphatic acrylic monomer for use as a reactive diluent in UV/EB or peroxide cured formulations or as a co-monomer for polyacrylates synthesis. | |
| TMPEOTA | Allnex | TMPEOTA (Trimethylolpropane ethoxy triacrylate) is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. TMPEOTA can be used to impart crosslinking to energy curable coatings and inks while ma...weiterlesen TMPEOTA (Trimethylolpropane ethoxy triacrylate) is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. TMPEOTA can be used to impart crosslinking to energy curable coatings and inks while maintaining a degree of flexibility and toughness. Of the common triacrylate diluents used in energy curable formulations, TMPEOTA exhibits the highest reactivity and the greatest viscosity reduction of oligomers. verkürzen | Request Sample |
| TMPTA | Allnex | TMPTA (TRIMETHYLOLPROPANE TRIACRYLATE) is a widely used reactive diluent in ultraviolet light (UV) and electron beam (EB) curable coatings and inks. It imparts crosslinking to the cured polymer providing hardness and chemical resistance. It is a cost effe...weiterlesen TMPTA (TRIMETHYLOLPROPANE TRIACRYLATE) is a widely used reactive diluent in ultraviolet light (UV) and electron beam (EB) curable coatings and inks. It imparts crosslinking to the cured polymer providing hardness and chemical resistance. It is a cost effective diluent compatible with the wide range of acrylated resins used in radiation curing applications. verkürzen | Request Sample |
| Triethyleneglycol di vinyl ether, DVE-3 | BASF SE, Intermediates Division | Triethylenglycol divinyl ether is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based se...weiterlesen Triethylenglycol divinyl ether is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds. Triethylenglycol divinyl ether performs low viscosity in UV-coatings, especially in cationic polymerization. No labeling, no risk phrase. Triethylenglycol divinyl ether is used for UV-coatings (wood, printing inks) and UV adhesives. verkürzen |
