UL Prospector

Erfolg!

Ihre Suche wurde erfolgreich gespeichert
51 Ergebnisse
TEGO® Rad 2800 Evonik Operations GmbH, BL Coating Additives TEGO® Rad 2800 is a new release additive for printing inks and varnishes. It has the highest release effect in the Rad portfolio, and therefore takes a further step in completing the range of radiation-curing glide and release additives. This product has ...weiterlesen TEGO® Rad 2800 is a new release additive for printing inks and varnishes. It has the highest release effect in the Rad portfolio, and therefore takes a further step in completing the range of radiation-curing glide and release additives. This product has a pronounced silicone character, combining strong hydrophobing properties with optimum system compatibility. verkürzen Request Sample
Dynoadd® F-712 Dynoadd by Dynea Dynoadd® F-712 is a non-silicone polymeric air release additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing pinholes and microfoam. The additive has little or no influence on film clari...weiterlesen Dynoadd® F-712 is a non-silicone polymeric air release additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing pinholes and microfoam. The additive has little or no influence on film clarity. Dynoadd® F-712 may contribute positively to flow. The product is diluted in 2-ethylhexyl acrylate to ease incorporation and ensure optimum dispersion in radiation curable formulations. Dynoadd® F-712 has applications in UV coatings. The additive is compatible with most solvent-borne and non-solvent UV coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. verkürzen
Dynoadd® F-707 Dynoadd by Dynea Dynoadd® F-707 is a non-silicone polymeric foam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-707 controls surface tension in solvent-based systems. S...weiterlesen Dynoadd® F-707 is a non-silicone polymeric foam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-707 controls surface tension in solvent-based systems. Small additions may also contribute to improved flow and a reduction in surface imperfections like craters and orange peel. Dynoadd® F-707 has a good compatibility with many wax dispersions, giving good performance also in highly waxed coatings. Dynoadd® F-707 can also be used in combination with Dynoadd® flow additives. Dynoadd® F-707 has applications in coil coatings, PVdF, general industry, and packaging coatings. The additive is compatible with most solvent-borne and non-solvent radcure coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. verkürzen
Dynoadd® F-701B Dynoadd by Dynea Dynoadd® F-701B is a highly effective polymeric additive, particularly effective as air release and anti popping agent. It controls surface tension in solvent based coating systems. Small additions may also contribute to improved flow, and a reduction in ...weiterlesen Dynoadd® F-701B is a highly effective polymeric additive, particularly effective as air release and anti popping agent. It controls surface tension in solvent based coating systems. Small additions may also contribute to improved flow, and a reduction in surface imperfections like craters, orange peel and pinholes. This product has a good compatibility with many wax dispersions giving good performance also in highly waxed coatings. Dynoadd® F-701B can be used in combination with Dynoadd® flow additives, in particular Dynoadd® F-101. verkürzen
Dynoadd® F-706 Dynoadd by Dynea Dynoadd F-706 is a non-silicone polymeric anti-foam and air release additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. It does not negatively influence the appearance of the ...weiterlesen Dynoadd F-706 is a non-silicone polymeric anti-foam and air release additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. It does not negatively influence the appearance of the coating. Dynoadd® F-706 has applications in UV coatings. The additive is compatible with most solvent-borne and non-solvent RadCure coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. verkürzen
BYK®-A 501 FOR UP RESINS BYK It is a silicone-free air release additive for unsaturated polyester, epoxy and PUR resins. Recommended applications include epoxy resins and PUR-systems.
Dynoadd® F-705 Dynoadd by Dynea Dynoadd® F-705 is a highly effective non-silicone, VOC free polymeric foam control concentrate. It is effective in radiation curing formulations at preventing generation of foam, and it is particularly effective in air release, thus reducing popping and p...weiterlesen Dynoadd® F-705 is a highly effective non-silicone, VOC free polymeric foam control concentrate. It is effective in radiation curing formulations at preventing generation of foam, and it is particularly effective in air release, thus reducing popping and pinholes. It can be used as a foam control and de-aerating additive in solvent-borne food contact coatings at levels up to 0.1%. Dynoadd® F-705 is recommended for use as defoamer and de-airator in thick film coatings (2K epoxy, UP, PUR). Dynoadd® F-705 has applications in packaging coatings, direct food contact, UV coatings, general industry, and floor coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. verkürzen
BYK®-354 FOR INKS BYK Acrylic leveling additives for printing inks and overprint varnishes. Solution of a polyacrylate.
N-Octadecyl vinyl ether, ODVE BASF SE, Intermediates Division N-Octadecyl vinyl ether, ODVE is used as raw material for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). Reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers...weiterlesen N-Octadecyl vinyl ether, ODVE is used as raw material for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). Reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Octadecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulations. N-Octadecyl vinyl ether improves hydrophobicity of polymers as well as surface active behavior. verkürzen
N-Dodecyl vinyl ether, DDVE BASF SE, Intermediates Division N-Dodecyl vinyl ether, DDVE is a monomer for copolymers of n-Dodecyl vinyl ether are used as raw materials for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). It is a reactive diluent for epoxy si...weiterlesen N-Dodecyl vinyl ether, DDVE is a monomer for copolymers of n-Dodecyl vinyl ether are used as raw materials for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). It is a reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Dodecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulations. n-Dodecyl vinyl ether improves hydrophobicity of polymers as well as surface active behavior. verkürzen
TEGO® Rad 2700 Evonik Operations GmbH, BL Coating Additives TEGO® Rad 2700 is a radically crosslinkable release and glide additive with utmost effectiveness. It is hazy liquid silicone acrylate with a very high slip and release effect. Phase separation may occur during storage of the product, but can be remixed by...weiterlesen TEGO® Rad 2700 is a radically crosslinkable release and glide additive with utmost effectiveness. It is hazy liquid silicone acrylate with a very high slip and release effect. Phase separation may occur during storage of the product, but can be remixed by stirring. The application properties of the product are not affected by the seperation. Addition of the product to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation of TEGO® Rad 2700. verkürzen Request Sample
ADDITOL® VXW 4926 Allnex ADDITOL® VXW 4926 is an antifoaming additive for water dilutable paints, without silicone addition. It has rapid defoaming or air release, and allows high film thickness of stoving paints, without cissing. It is also suited for combinations of dispersions...weiterlesen ADDITOL® VXW 4926 is an antifoaming additive for water dilutable paints, without silicone addition. It has rapid defoaming or air release, and allows high film thickness of stoving paints, without cissing. It is also suited for combinations of dispersions with water dilutable synthetic resins. verkürzen Request Sample
Siltech® C-4405 Siltech Corp. Siltech® C-4405 is an 80% active dispersion of a very high molecular weight polydimethylsiloxane. It is an additive for both water-based as well as solvent-based paints and inks, providing slip, mar resistance, gloss, anti-blocking and release effects.
LUBA-print 164/G Munzing Chemie LUBA-print 164/G is a white amide wax dispersion additive for paints and printing inks. It finds application as a aqueous lubricant and release agent. In water-based lacquers, it is used to improve slip and scratch resistance.It is also a pelletizing aid ...weiterlesen LUBA-print 164/G is a white amide wax dispersion additive for paints and printing inks. It finds application as a aqueous lubricant and release agent. In water-based lacquers, it is used to improve slip and scratch resistance.It is also a pelletizing aid for granule-technique to improve the anti-blocking effect. verkürzen
BC 403 Basildon Chemical Company Ltd. BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...weiterlesen BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.03. verkürzen
EBECRYL® 1360 Allnex EBECRYL® 1360 is a silicone hexa-acrylate material which contributes slip, substrate wetting and flow properties when used as an additive in formulations cured by UV or EB. Cured films containing EBECRYL® 1360 will exhibit a smooth, tack free surface, with good blocking resistance. It is recommended for use in: overprint varnishes, clear coatings on paper, plastics and metal, release...weiterlesen EBECRYL® 1360 is a silicone hexa-acrylate material which contributes slip, substrate wetting and flow properties when used as an additive in formulations cured by UV or EB. Cured films containing EBECRYL® 1360 will exhibit a smooth, tack free surface, with good blocking resistance. It is recommended for use in: overprint varnishes, clear coatings on paper, plastics and metal, release coatings, and EB cure. verkürzen Request Sample
LUBA-print 164/R Munzing Chemie LUBA-print 164/R is a white amide wax dispersion additive for paints and printing inks. It is used as a aqueous lubricant and release agent for water-based lacquers to improve the anti-blocking, slip and scratch resistance. Other applications include acti...weiterlesen LUBA-print 164/R is a white amide wax dispersion additive for paints and printing inks. It is used as a aqueous lubricant and release agent for water-based lacquers to improve the anti-blocking, slip and scratch resistance. Other applications include acting as a pelletizing aid for granule technique to be used in underwater pelletizing and keeps the granules non-sticking and free-flowing. verkürzen
BC 404 Basildon Chemical Company Ltd. BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...weiterlesen BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.06, and an INCI name of PEG-8 Dimethicone. verkürzen
ADDITOL® XL 6568 Allnex ADDITOL® XL 6568 is an anti-adhesion promotor. It is added to stripping enamels as anti adhesion promotor. Coatings of this nature give temporary protection against mechanical attack and corrosion to various substrates. Such coatings can easily be peeled ...weiterlesen ADDITOL® XL 6568 is an anti-adhesion promotor. It is added to stripping enamels as anti adhesion promotor. Coatings of this nature give temporary protection against mechanical attack and corrosion to various substrates. Such coatings can easily be peeled off later. verkürzen Request Sample
TEGO® Glide 407 Evonik Operations GmbH, BL Coating Additives TEGO® Glide 407 shows outstanding release properties in solventborne coatings. It is highly recommended for bakeware, having a good release effect for sugar-containing baked goods. Request Sample
Dynoadd® F-470 Dynoadd by Dynea Dynoadd® F-470 eliminates air entrapment, pinholes and surface foam. It prevents foaming during manufacture and application. Dynoadd® F-470 is particularly suited for thick films like floor coatings, castings and moulding based on 2K epoxies, unsaturated ...weiterlesen Dynoadd® F-470 eliminates air entrapment, pinholes and surface foam. It prevents foaming during manufacture and application. Dynoadd® F-470 is particularly suited for thick films like floor coatings, castings and moulding based on 2K epoxies, unsaturated PE and PUs. Dynoadd® F-470 does not reduce transparency and is recommended for clear coats. Dynoadd® F-470 contains a lower level of fluoro polymer. verkürzen
Dynoadd® F-711 Dynoadd by Dynea Dynoadd® F-711 combines highly efficient foam control properties with improved compatibility resulting in improved flow and levelling properties. This combination makes it particularly effective in preventing and reducing the effects of popping. Dynoad...weiterlesen Dynoadd® F-711 combines highly efficient foam control properties with improved compatibility resulting in improved flow and levelling properties. This combination makes it particularly effective in preventing and reducing the effects of popping. Dynoadd® F-711 is effective in polyester or alkyd-melamine, 2K-PU and 2K-Acrylic formulations. It has applications in automotive refinish coatings, coil coatings, and industrial coatings. verkürzen
Dynoadd® F-713 Dynoadd by Dynea Dynoadd® F-713 eliminates air entrapment, pinholes and surface foam in 100% or low VOC formulations. It prevents foaming during manufacture and application. Dynoadd® F-713 is particularly suited for thick films like floor coatings, castings and moulding b...weiterlesen Dynoadd® F-713 eliminates air entrapment, pinholes and surface foam in 100% or low VOC formulations. It prevents foaming during manufacture and application. Dynoadd® F-713 is particularly suited for thick films like floor coatings, castings and moulding based on 2K epoxies, unsaturated PE and PUs. Dynoadd® F-713 may reduce film transparency. Dynoadd® F-713 has applications in 2K Epoxy, Unsat. PE, and 1 and 2K PU formulations. verkürzen
Siltech® C-608 Siltech Corp. Siltech®C-608 is a 100% active non-foaming water-soluble silicone glycol copolymer. It provides slip and mar resistance to water-borne based paints, inks and coatings. Siltech® C-608 is used as a non-foaming additive for water-borne systems. The primary function is to improve flow, leveling and release...weiterlesen Siltech®C-608 is a 100% active non-foaming water-soluble silicone glycol copolymer. It provides slip and mar resistance to water-borne based paints, inks and coatings. Siltech® C-608 is used as a non-foaming additive for water-borne systems. The primary function is to improve flow, leveling and release. It is recommended that Siltech® C-608 be used between 0.05-0.5% weight percent based on the total formulation. It can be added at any stage during the process. verkürzen
Dynoadd® F-201 Dynoadd by Dynea Dynoadd® F-201 is a solution of a polyester modified acrylic polymer that effectively controls surface tension in solvent based coating systems. Small additions of this product contribute to improved flow, and a reduction in surface imperfections like craters, orange peel and pinholes. Dynoadd® F-201 improves air release...weiterlesen Dynoadd® F-201 is a solution of a polyester modified acrylic polymer that effectively controls surface tension in solvent based coating systems. Small additions of this product contribute to improved flow, and a reduction in surface imperfections like craters, orange peel and pinholes. Dynoadd® F-201 improves air release and reduces foam formation in some systems. Dynoadd® F-201 has applications in coil coatings, wood coatings, and general industry. The additive has limited compatibility in many lacquer systems, thus contributing to good defoaming as well as levelling. It may be used in all layers in multi-layered systems. verkürzen
EBECRYL® 350 Allnex EBECRYL® 350 is a silicone diacrylate that improves slip, substrate wetting, and coating flow and leveling when used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB). Cured films containing EBECRYL® 350 will exhibit a smooth, tack free surface, with good blocking resistance. Because of its acrylate functionality, the silicone cures into the polymeric backbone, thus eliminating the migration that free silicones often display in coatings. EBECRYL® 350 is recommended for use in: overprint varnishes, clear coatings on paper, plastics and metal, and release...weiterlesen EBECRYL® 350 is a silicone diacrylate that improves slip, substrate wetting, and coating flow and leveling when used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB). Cured films containing EBECRYL® 350 will exhibit a smooth, tack free surface, with good blocking resistance. Because of its acrylate functionality, the silicone cures into the polymeric backbone, thus eliminating the migration that free silicones often display in coatings. EBECRYL® 350 is recommended for use in: overprint varnishes, clear coatings on paper, plastics and metal, and release coatings. verkürzen Request Sample
Polytone P 141 Polyols and Polymers Polytone P 141 is a rosin modified penta esterified and phenol formaldehyde resin. This product is yellowish-brown and comes in small solid pieces. It is a high melting modified phenolic resin that is suitable for manufacture of offset printing inks where low body is required. Polytone P 141 is primarily used as an additive in liquid inks that have good solvent release...weiterlesen Polytone P 141 is a rosin modified penta esterified and phenol formaldehyde resin. This product is yellowish-brown and comes in small solid pieces. It is a high melting modified phenolic resin that is suitable for manufacture of offset printing inks where low body is required. Polytone P 141 is primarily used as an additive in liquid inks that have good solvent release properties. It is used in flexographic, offset, and printing inks along with varnishes and has several more uses. It is soluble with aliphatic and aromatic hydrocarbons, ester and varnish oils. It is not soluble with aldehydes. verkürzen
MODAFLOW® 2100 Allnex Modaflow® 2100 is an acrylic flow modifier, without silicone addition. It improves flow and leveling, reduces pinholes, fish eyes, craters, and orange peels, improves substrate wetting, aids in air release, and facilitates pigment dispersion. Request Sample
THE PREMIUM-OFFENSIVE! FRITSCH GmbH - Milling and Sizing Press Release: FRITSCH is going to extend the FRITSCH premium line by 4 additional new high-tech laboratory mills for various applications: functionally designed to the smallest detail, with interesting new features, latest technology, highest performance...weiterlesen Press Release: FRITSCH is going to extend the FRITSCH premium line by 4 additional new high-tech laboratory mills for various applications: functionally designed to the smallest detail, with interesting new features, latest technology, highest performance and maximum safety. verkürzen
MODAFLOW® EPSILON Allnex Modaflow® Epsilon is an acrylic flow modifier, without silicone addition. It improves flow and leveling, reduces defects, and improves substrate wetting. This product also helps maintain or improve substrate adhesion, to defoam and aid in air release, and...weiterlesen Modaflow® Epsilon is an acrylic flow modifier, without silicone addition. It improves flow and leveling, reduces defects, and improves substrate wetting. This product also helps maintain or improve substrate adhesion, to defoam and aid in air release, and to facilitate pigment dispersion. verkürzen Request Sample
FRITSCH – SAMPLE PREPARATION AND PARTICLE SIZING! FRITSCH GmbH - Milling and Sizing Press Release: FRITSCH is extending the FRITSCH premium line by 4 additional new high-tech laboratory mills for various applications as well as particle sizing range by the ImageSizer and ImageTec ANALYSETTE 28 for particle size and shape measurements of ...weiterlesen Press Release: FRITSCH is extending the FRITSCH premium line by 4 additional new high-tech laboratory mills for various applications as well as particle sizing range by the ImageSizer and ImageTec ANALYSETTE 28 for particle size and shape measurements of powders, bulk solids, suspensions and emulsions. verkürzen
BLUESIL RTV 3240 Elkem Silicones BLUESIL RTV 3240 is a silicone elastomer which, after the addition of BLUESIL CATA N, cures at room temperature and leads to flexible and elastic material. The crosslinking reaction occurs, without release of heat, the formation of isopropanol, whose disp...weiterlesen BLUESIL RTV 3240 is a silicone elastomer which, after the addition of BLUESIL CATA N, cures at room temperature and leads to flexible and elastic material. The crosslinking reaction occurs, without release of heat, the formation of isopropanol, whose dispersion is required before used of the mould or the protected object verkürzen
Dynoadd® F-101 Dynoadd by Dynea Dynoadd® F-101 is a polymeric, non-silicone flow and levelling agent. It reduces the surface tension in non-solvent and solvent based coating systems, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dyno...weiterlesen Dynoadd® F-101 is a polymeric, non-silicone flow and levelling agent. It reduces the surface tension in non-solvent and solvent based coating systems, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-101 is more polar than Dynoadd® F-100. Dynoadd® F-101 gives improved protection against surface defects in radcure formulations. The higher polarity contributes to good pigment wetting and improved adhesion in some systems. Dynoadd® F-101 has application in coil coatings, automotive OEM, printing ink, and radcure coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, Dynoadd® F-101 is seen to have an extra advantage in polar lacquer systems due to its polar properties. It may be used in all layers in multi-layered systems. verkürzen
SILIKOFTAL® non-stick 60 Evonik Operations GmbH, BL Coating Additives SILIKOFTAL® non-stick 60 is a silicone polyester resin for the production of decorative, non-stick coatings. It is a hazy liquid used for release coatings for bakeware and non-stick coatings in combination with Polytetrafluoroethylene (PTFE). It is also u...weiterlesen SILIKOFTAL® non-stick 60 is a silicone polyester resin for the production of decorative, non-stick coatings. It is a hazy liquid used for release coatings for bakeware and non-stick coatings in combination with Polytetrafluoroethylene (PTFE). It is also used for garden shears, screws, and decorative coatings for cookware, household appliances, and electric and gas heaters with a permanent thermal stability of 250°C. Some special features of SILIKOFTAL® non-stick 60 include particularly good release of sugar containing baking goods, excellent dishwasher detergent resistance, good adhesion, and without addition of organotin-cantaining compounds. verkürzen Request Sample
S-400-N1 (EBS Wax) Shamrock Technologies b.v.b.a. S-400-N1 is a micronized EBS (ethylene bisstearamide) wax powder showing melting peaks ranging from 99 – 147°C. S-400-N1 is used in both the ink and coating industry.
MODAFLOW® Resin Allnex Modaflow® Resin is an acrylic flow modifier without silicone addition. It is used in non-aqueous industrial coatings and powder coatings to improve flow and leveling, reduce pinholes, fisheyes, craters, and orange peel; and to improve substrate wetting. This product also helps maintain or improve substrate adhesion, to defoam and aid in air release...weiterlesen Modaflow® Resin is an acrylic flow modifier without silicone addition. It is used in non-aqueous industrial coatings and powder coatings to improve flow and leveling, reduce pinholes, fisheyes, craters, and orange peel; and to improve substrate wetting. This product also helps maintain or improve substrate adhesion, to defoam and aid in air release, and to facilitate pigment dispersion. verkürzen Request Sample
S-400-SP5 (EBS Wax) Shamrock Technologies b.v.b.a. S-400-SP5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 107 – 145°C. S-400-SP5 is recommended for powder, water-based, solvent-based and UV systems.
S-400-N5 (EBS Wax) Shamrock Technologies b.v.b.a. S-400-N5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 99 – 147°C. S-400-N5 is recommended for powder, water-based, solvent-based and UV systems.
BLUESIL RTV 1597 A Elkem Silicones BLUESIL RTV 1597 is a two component, medium hardness, high strength, addition cure, room temperature or heat curing silicone elastomer. Designed specifically for moldmaking applications, it offers low viscosity, high tear and cut resistance, and easy release...weiterlesen BLUESIL RTV 1597 is a two component, medium hardness, high strength, addition cure, room temperature or heat curing silicone elastomer. Designed specifically for moldmaking applications, it offers low viscosity, high tear and cut resistance, and easy release for long lasting molds. BLUESIL RTV 1597 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and well-defined detail reproduction, making it ideal for prototyping applications. verkürzen
SILICONE FLUID ATPN-100 Beijing Entrepreneur Science &Trading Co., Ltd. SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...weiterlesen SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. verkürzen
BLUESIL V-330 Elkem Silicones Bluesil V-330 is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release...weiterlesen Bluesil V-330 is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. Bluesil V-330 is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. verkürzen
BLUESIL V-340 Elkem Silicones Bluesil V-340 is a two component, addition reaction, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release...weiterlesen Bluesil V-340 is a two component, addition reaction, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. Bluesil V-340 is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. verkürzen
BLUESIL CA-35 FC Elkem Silicones BLUESIL CA-35 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release...weiterlesen BLUESIL CA-35 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. BLUESIL V-330 + FC Catalyst is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. verkürzen
BLUESIL RTV 1556 A Elkem Silicones BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resistance, and easy release...weiterlesen BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resistance, and easy release for long lasting molds. BLUESIL RTV 1556 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and excellent detail reproduction which makes it well suited for production and prototyping use with all types of casting resins. verkürzen
BLUESIL CA-55 FC Elkem Silicones BLUESIL CA-55 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release...weiterlesen BLUESIL CA-55 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. BLUESIL V-330 + FC Catalyst is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. verkürzen
BLUESIL RTV 1556 FC B Elkem Silicones BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resistance, and easy release...weiterlesen BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resistance, and easy release for long lasting molds. BLUESIL RTV 1556 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and excellent detail reproduction which makes it well suited for production and prototyping use with all types of casting resins. verkürzen
BLUESIL CA-45 FC Elkem Silicones BLUESIL CA-45 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release...weiterlesen BLUESIL CA-45 FC Catalyst is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. BLUESIL V-330 + FC Catalyst is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. verkürzen
ACURE™ 500 Allnex ACURE™ 500 is the first generation of blocked catalyst used in ACURE™ systems. ACURE™ 500 consists of a strong base which is blocked with di-ethyl carbonate. ACURE™ 500 unblocks with the release of alcohol and CO2 and is the key enabler to the provision o...weiterlesen ACURE™ 500 is the first generation of blocked catalyst used in ACURE™ systems. ACURE™ 500 consists of a strong base which is blocked with di-ethyl carbonate. ACURE™ 500 unblocks with the release of alcohol and CO2 and is the key enabler to the provision of fast dry times with long pot lives in ACURE™ coatings. The rate at which ACURE™ 500 unblocks may be controlled by the addition of an alcohol (typically ethanol, n-propanol, or n-butanol) to the ACURE™ coating. verkürzen Request Sample
CYMEL® 1170 Allnex CYMEL® 1170 resin is a highly butylated glycoluril crosslinker designed for use in both water and organo-soluble coating systems. Its superior adhesion relative to existing melamine and benzoguanamine crosslinkers provides increased corrosion resistance and flexibility. The better adhesion is not lost after post-forming of parts and exposure of the stressed coating to humidity, steam, dry heat, or weather. This feature makes this product a good candidate for coil of metal decoration enamels and primers. In addition, it release...weiterlesen CYMEL® 1170 resin is a highly butylated glycoluril crosslinker designed for use in both water and organo-soluble coating systems. Its superior adhesion relative to existing melamine and benzoguanamine crosslinkers provides increased corrosion resistance and flexibility. The better adhesion is not lost after post-forming of parts and exposure of the stressed coating to humidity, steam, dry heat, or weather. This feature makes this product a good candidate for coil of metal decoration enamels and primers. In addition, it releases significantly lower amounts of formaldehyde during the baking process compared to other amino resins. verkürzen Request Sample
BLUESIL CA-35 BLUE Elkem Silicones BLUESIL CA-35 BLUE is used primarily with BLUESIL V-330 and BLUESIL V-340. It provides variable hardness of curing for these products. BLUESIL V-330 is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release...weiterlesen BLUESIL CA-35 BLUE is used primarily with BLUESIL V-330 and BLUESIL V-340. It provides variable hardness of curing for these products. BLUESIL V-330 is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. BLUESIL V-330 is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. verkürzen
SILICONE FLUID ATPN-1000 Beijing Entrepreneur Science &Trading Co., Ltd. SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...weiterlesen SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. verkürzen