MODAFLOW® Lambda | Allnex | MODAFLOW® Lambda -flow/leveling/levelling- is an acryl-silicone hybrid flow promoter. It is a unique acryl-silicone polymer hybrid technology flow promoter combining individual efficiencies from high end acrylic as well as silicone leveling performance. It is highly compatible in all non-aqueous clear coat and topcoat formulation...weiterlesen MODAFLOW® Lambda -flow/leveling/levelling- is an acryl-silicone hybrid flow promoter. It is a unique acryl-silicone polymer hybrid technology flow promoter combining individual efficiencies from high end acrylic as well as silicone leveling performance. It is highly compatible in all non-aqueous clear coat and topcoat formulations and outperforms surface characteristics such as gloss, DOI, sharpness and brilliancy, and anti orange-peel effect. verkürzen | Request Sample |
ALBIDUR® PU 5640 | Evonik Operations GmbH, BL Coating Additives | ALBIDUR® PU 5640 is a white liquid used in the primer/filler and top coat for waterborne, solventborne, and solvent-free 2-pack component polyurethane formulations. This product has an excellent increased tear and impact resistance. It also has good prese...weiterlesen ALBIDUR® PU 5640 is a white liquid used in the primer/filler and top coat for waterborne, solventborne, and solvent-free 2-pack component polyurethane formulations. This product has an excellent increased tear and impact resistance. It also has good preservation of network density and no change in mechanical properties. ALBIDUR® PU 5640 has reduced cure shrinkage, improved dirt shedding, and barrier properties against water and diluted acids. verkürzen | Request Sample |
Dynoadd® D-962 | Dynoadd by Dynea | Dynoadd® D-962 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-962 provides excellent pigment affinity and effective steric stabilization. Pigment concentrates ...weiterlesen Dynoadd® D-962 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-962 provides excellent pigment affinity and effective steric stabilization. Pigment concentrates produced using Dynoadd® D-962 have low viscosity and give excellent color strength and gloss in a wide variety of water-borne industrial coatings and printing inks. verkürzen | |
Dynoadd® F-113 | Dynoadd by Dynea | Dynoadd® F-113 is a silicone-free, flow, and leveling additive for solvent-based heat set topcoat formulations. By creating a surface layer with high cross-linking density, F-113 reduces dirt pickup and increases anti-blocking properties. Dynoadd® F-113 c...weiterlesen Dynoadd® F-113 is a silicone-free, flow, and leveling additive for solvent-based heat set topcoat formulations. By creating a surface layer with high cross-linking density, F-113 reduces dirt pickup and increases anti-blocking properties. Dynoadd® F-113 can improve protective film release and, in some cases, anti-graffiti properties. Surface defects such as orange peel, craters, and popping are eliminated. verkürzen | |
VIACRYL® VSC 6279w/45WA | Allnex | VIACRYL® VSC 6279W/45WA is a copolymer emulsion based on styrene and acrylic acid esters free of organic cosolvents and alkyl phenol ethoxylates. It can be used as sole binder to formulate rapid drying corrosion protecting primers and primer surfacers. It...weiterlesen VIACRYL® VSC 6279W/45WA is a copolymer emulsion based on styrene and acrylic acid esters free of organic cosolvents and alkyl phenol ethoxylates. It can be used as sole binder to formulate rapid drying corrosion protecting primers and primer surfacers. It can even be used to formulate non yellowing decorative finishing systems with excellent outdoor durability and UV resistance. verkürzen | Request Sample |
LAPONITE® RD | BYK | LAPONITE® RD is a synthetic layered silicate. It is insoluble in water but hydrates and swells to give clear and colourless colloidal dispersions. At concentrations of 2% or greater in water, highly thixotropic gels can be produced. This product is used for imparting a shear sensitive structure to a wide range of waterborne formulation...weiterlesen LAPONITE® RD is a synthetic layered silicate. It is insoluble in water but hydrates and swells to give clear and colourless colloidal dispersions. At concentrations of 2% or greater in water, highly thixotropic gels can be produced. This product is used for imparting a shear sensitive structure to a wide range of waterborne formulations. These include household and industrial surface coatings, cleansers, ceramic glazes, agrochemical, oilfield and horticultural products. verkürzen | |
TEGO® Flow 375 | Evonik Operations GmbH, BL Coating Additives | TEGO® Flow 375 is a highly compatible aromatic-free flow additive based on polyacrylate. It has excellent compatibility and flow promotion in clear coat, pigmented, solventborne, and high solids formulations. This of course does not affect the product's s...weiterlesen TEGO® Flow 375 is a highly compatible aromatic-free flow additive based on polyacrylate. It has excellent compatibility and flow promotion in clear coat, pigmented, solventborne, and high solids formulations. This of course does not affect the product's surface energy or slip. It is used as the primer/basecoat and as the topcoat for lacquer coats, and is soluble in ethanol, white spirit, butyl acetate, and tripropylene glycol diacrylate (TPGDA). verkürzen | Request Sample |
TEGO® Foamex 8030 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 8030 is a highly effective defoamer emulsion for waterborne systems, especially for a PVC range of 20 to 60%. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer, containing fumed silica. TEGO® Foamex 8030 has very strong defoaming, especially for pigmented high-viscosity formulation...weiterlesen TEGO® Foamex 8030 is a highly effective defoamer emulsion for waterborne systems, especially for a PVC range of 20 to 60%. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer, containing fumed silica. TEGO® Foamex 8030 has very strong defoaming, especially for pigmented high-viscosity formulations. It is suitable for brush and roller applications as well as compressed air spraying and flexo/gravure printing. verkürzen | Request Sample |
TEGO® VariPlus CA | Evonik Operations GmbH, BL Coating Additives | TEGO® VariPlus CA is a hard, ketone-aldehyde condensation resin for solventborne coatings and printing inks that is delivered in the form of pellets. This product is used for flexo and gravure inks, ball-point pen inks, industrial coatings, and wood and furniture coatings. Particularly for solventborne formulation...weiterlesen TEGO® VariPlus CA is a hard, ketone-aldehyde condensation resin for solventborne coatings and printing inks that is delivered in the form of pellets. This product is used for flexo and gravure inks, ball-point pen inks, industrial coatings, and wood and furniture coatings. Particularly for solventborne formulations, TEGO® VariPlus CA improves hardness, gloss, and blocking resistance as well as improving the adhesion on aluminum, steel, and glass. verkürzen | Request Sample |
TEGO® VariPlus 1201 TF | Evonik Operations GmbH, BL Coating Additives | TEGO® VariPlus 1201 TF is a solution of a polyurethane polyol resin for solventborne coatings and printing inks delivered in liquid form. Particularly for solventborne formulations, this product can be applied for flexo and gravure inks as well as wood an...weiterlesen TEGO® VariPlus 1201 TF is a solution of a polyurethane polyol resin for solventborne coatings and printing inks delivered in liquid form. Particularly for solventborne formulations, this product can be applied for flexo and gravure inks as well as wood and furniture coatings. TEGO® VariPlus 1201 TF improves hardness, gloss, and blocking resistance as well as the color strength of organic pigments and the adhesion on many plastics and aluminum. verkürzen | Request Sample |
TEGO® Foamex 845 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 845 is a defoamer emulsion for utmost requirements with regards to foam prevention and destruction. It is a white, thixotropic liquid emulsion of an organo-modified polysiloxane which contains fumed silica. TEGO® Foamex 845 has very strong defoaming with fast foam knock down, especially for surfactant rich formulation...weiterlesen TEGO® Foamex 845 is a defoamer emulsion for utmost requirements with regards to foam prevention and destruction. It is a white, thixotropic liquid emulsion of an organo-modified polysiloxane which contains fumed silica. TEGO® Foamex 845 has very strong defoaming with fast foam knock down, especially for surfactant rich formulations. It is highly suitable for flexo/gravure printing. It is also suitable for flooring and brush/roller applications. verkürzen | Request Sample |
Cinergi™ 2018 A | Lawter | Cinergi™ 2018 A is a sheet-fed metallic vehicle specifically created for use with gold pigments, although formulations with silver pigment can also be used. The product's resin facilitates improved gloss, holdout and misting. A reduced acid content ensure...weiterlesen Cinergi™ 2018 A is a sheet-fed metallic vehicle specifically created for use with gold pigments, although formulations with silver pigment can also be used. The product's resin facilitates improved gloss, holdout and misting. A reduced acid content ensures the finished ink keeps desired properties while countering tarnishing. Its flexibility allows Cinergi™ 2018 A to be adaptable to a variety of metallic applications including sheet-fed inks. verkürzen | |
HydriPrint 335 | Hydrite Chemical Co. | HydriPrint 335 is a hard but flexible polymer formulated to provide good grease and water resistance. This product is well suited for use in overprint varnishes. | |
CYMEL® 380 | Allnex | CYMEL® 380 resin is a partially methylated melamine crosslinker supplied in iso-butanol. Like other high imino resins, CYMEL® 380 is fast reacting and has a high tendency to self-condense resulting in films with high film hardness, gloss, chemical resistance and exterior durability. The high reactivity, combined with high solids content makes CYMEL® 380 resin suitable for a wide range of solventborne and waterborne industrial bake formulation...weiterlesen CYMEL® 380 resin is a partially methylated melamine crosslinker supplied in iso-butanol. Like other high imino resins, CYMEL® 380 is fast reacting and has a high tendency to self-condense resulting in films with high film hardness, gloss, chemical resistance and exterior durability. The high reactivity, combined with high solids content makes CYMEL® 380 resin suitable for a wide range of solventborne and waterborne industrial bake formulations. verkürzen | Request Sample |
CYMEL® 370 | Allnex | CYMEL® 370 resin is a partially methylated melamine crosslinker supplied in iso-butanol. Like other high imino resins, CYMEL® 370 is fast reacting and has a high tendency to self-condense resulting in films with high film hardness, gloss, chemical resistance and exterior durability. The high reactivity, combined with high solids content makes CYMEL® 370 resin suitable for a wide range of solventborne and waterborne industrial bake formulation...weiterlesen CYMEL® 370 resin is a partially methylated melamine crosslinker supplied in iso-butanol. Like other high imino resins, CYMEL® 370 is fast reacting and has a high tendency to self-condense resulting in films with high film hardness, gloss, chemical resistance and exterior durability. The high reactivity, combined with high solids content makes CYMEL® 370 resin suitable for a wide range of solventborne and waterborne industrial bake formulations. verkürzen | Request Sample |
EBECRYL® 1365 | Allnex | EBECRYL® 1365 is a hexa-functional silicone modified urethane acrylate diluted in 50% of EBECRYL® 160. EBECRYL® 1365 can be used to prepare UV/EB curable coatings with low surface energy providing anti-stain and easy-to-clean properties. Additionally EBECRYL® 1365 can be used as a processing agent in matt and excimer curable formulation...weiterlesen EBECRYL® 1365 is a hexa-functional silicone modified urethane acrylate diluted in 50% of EBECRYL® 160. EBECRYL® 1365 can be used to prepare UV/EB curable coatings with low surface energy providing anti-stain and easy-to-clean properties. Additionally EBECRYL® 1365 can be used as a processing agent in matt and excimer curable formulations, facilitating a uniform film creation which in turn significantly increases the process robustness. verkürzen | Request Sample |
SETYRENE™ 13-4437 | Allnex | SETYRENE® 13-4437 is a specially formulated silicone modified copolymer alkyd that meets the vehicle requirements of Federal Specification TT-E-490E. | Request Sample |
HydriPrint 376 | Hydrite Chemical Co. | HydriPrint 376 is a hard film forming polymer formulated for fast drying and good resolubility. This product is well suited for use in water-based inks. | |
REGAL® 400 | Cabot Corporation - Additives | REGAL® 400 is a low structure pigment black that is formulated to impart high gloss and good color strength in printing inks and other applications. | |
TEGO® Foamex N | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex N is a defoamer concentrate. It is a hazy liquid dimethyl polysiloxane which contains fumed silica. It has very strong defoaming in solventborne, pigmented, and radiation-curing formulations. Addition of this product may be used at the grindi...weiterlesen TEGO® Foamex N is a defoamer concentrate. It is a hazy liquid dimethyl polysiloxane which contains fumed silica. It has very strong defoaming in solventborne, pigmented, and radiation-curing formulations. Addition of this product may be used at the grinding stage of the procedure. TEGO® Foamex N is suitable for use for flooring, flexo/gravure printing, and brush and roller applications. It has clear solubility in both white spirit and butyl acetate. verkürzen | Request Sample |
TEGO® Glide 435 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide 435 is a highly effective wetting, flow and glide additive with very low foaming. It is a polyether siloxane copolymer, clear liquid which becomes hazy and thickens at temperatures below 15 °C, but returns to clear and pourable after warming. This does not affect the performance properties of the product. TEGO® Glide 435 has good slip effect and substrate wetting without stablilizing foam in clear coat, pigmented, or radiation-curing formulation...weiterlesen TEGO® Glide 435 is a highly effective wetting, flow and glide additive with very low foaming. It is a polyether siloxane copolymer, clear liquid which becomes hazy and thickens at temperatures below 15 °C, but returns to clear and pourable after warming. This does not affect the performance properties of the product. TEGO® Glide 435 has good slip effect and substrate wetting without stablilizing foam in clear coat, pigmented, or radiation-curing formulations. verkürzen | Request Sample |
CYMEL® 1141 | Allnex | CYMEL® 1141 resin is a highly methylated/iso-butylated, carboxy-modified melamine crosslinker supplied in iso-butanol. It is especially designed for electro-deposition primer formulations requiring excellent corrosion and resistance properties. This produ...weiterlesen CYMEL® 1141 resin is a highly methylated/iso-butylated, carboxy-modified melamine crosslinker supplied in iso-butanol. It is especially designed for electro-deposition primer formulations requiring excellent corrosion and resistance properties. This product contains chelating groups which can form colored compounds with heavy metal ions such as iron and zinc. For that reason it is recommended to use CYMEL® 1141 resin only in dark single coat applications or primers and not in pastel colors. verkürzen | Request Sample |
NANOCRYL® C 140 | Evonik Operations GmbH, BL Coating Additives | NANOCRYL® C 140 is a clear to slightly yellow liquid, 50 pbw silica nanoparticles in hexanedioldiacrylate. It has good UV-resistance, high flexibility, and is used for solventborne and solvent-free radiation-curing formulations. It also applied in overpri...weiterlesen NANOCRYL® C 140 is a clear to slightly yellow liquid, 50 pbw silica nanoparticles in hexanedioldiacrylate. It has good UV-resistance, high flexibility, and is used for solventborne and solvent-free radiation-curing formulations. It also applied in overprint varnishes and plastic top coats. This product has enhanced scratch and abrasion resistance with no decrease of transparency. It has good adhesion on aluminum/glass, reduced cure shrinkage, and barrier effect. It also has improved dirt shedding. verkürzen | Request Sample |
CYMEL® 247-10 | Allnex | CYMEL 247-10 resin is a partially n-butylated melamine-formaldehyde crosslinking agent characterized by a superior degree of compatibility with most backbone polymers, as implied by its very high hydrocarbon tolerance value. CYMEL 247-10 resin is suitable for industrial baking enamels requiring good flow, high gloss and superior resistance properties. CYMEL 247-10 resin is also useful as a leveling agent in coil coating and metal decoration formulation...weiterlesen CYMEL 247-10 resin is a partially n-butylated melamine-formaldehyde crosslinking agent characterized by a superior degree of compatibility with most backbone polymers, as implied by its very high hydrocarbon tolerance value. CYMEL 247-10 resin is suitable for industrial baking enamels requiring good flow, high gloss and superior resistance properties. CYMEL 247-10 resin is also useful as a leveling agent in coil coating and metal decoration formulations to improve flow, wetting and gloss. verkürzen | Request Sample |
Dynoadd® F-461 | Dynoadd by Dynea | Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a sig...weiterlesen Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a significant reduction in foam formation and stability in WB applications. Surface slip is improved considerably giving improved scratch and mar resistance. Dynoadd® F-461 is a wetting additive providing an optimal all-around balance of properties and benefits. verkürzen | |
TEGO® Phobe 1500 N | Evonik Operations GmbH, BL Coating Additives | TEGO® Phobe 1500 N is a siloxane hydrophobing agent for waterborne, pigmented, and solventborne formulations. It is a clear liquid solution of an amino functional polysiloxane. TEGO® Phobe 1500 N has a very pronounced beading effect as well as good hydr...weiterlesen TEGO® Phobe 1500 N is a siloxane hydrophobing agent for waterborne, pigmented, and solventborne formulations. It is a clear liquid solution of an amino functional polysiloxane. TEGO® Phobe 1500 N has a very pronounced beading effect as well as good hydrophobing and early water resistance. It is suitable for silicate paints and plasters, emulsion paints and plasters, and wood coating applications. It is recommended to add this product to the grind stage before the let-down stage. verkürzen | Request Sample |
EBECRYL® 524 | Allnex | EBECRYL® 524 is an acid-modified polyester diluted 30% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDODA)(1). It is used as the primary or modifying oligomer in UV or EB curable formulations to increase adhesion to a variety of substrat...weiterlesen EBECRYL® 524 is an acid-modified polyester diluted 30% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDODA)(1). It is used as the primary or modifying oligomer in UV or EB curable formulations to increase adhesion to a variety of substrates including paper, plastics and metal. It is recommended for: laminating adhesives, particularly between paper/aluminum, paper/LDPE, paper/polypropylene and aluminum/LDPE, primer coatings on metal, metallization receptive coatings on plastics, and improving intercoat adhesion. verkürzen | Request Sample |
EBECRYL® 745 | Allnex | EBECRYL® 745 is an acrylic polymer diluted 46% by weight with a 1/1 ratio of the reactive diluents 1,6-hexanediol diacrylate (HDODA) and tripropylene glycol diacrylate (TRPGDA). It is used as the primary or modifying oligomer in ultraviolet light (UV) or electron beam (EB) curable formulation...weiterlesen EBECRYL® 745 is an acrylic polymer diluted 46% by weight with a 1/1 ratio of the reactive diluents 1,6-hexanediol diacrylate (HDODA) and tripropylene glycol diacrylate (TRPGDA). It is used as the primary or modifying oligomer in ultraviolet light (UV) or electron beam (EB) curable formulations to increase adhesion on difficult substrates. EBECRYL® 745 is recommended for: silk screen inks, coatings on plastics, and adhesives and inks for difficult substrates, such as untreated polyester, polypropylene, polystyrene, etc. verkürzen | Request Sample |
TEGO® Dispers 652 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 652 is a solvent- and APE-free pigment-wetting and dispersing additive. It is a clear to slightly hazy liquid concentrate of a fatty acid derivative. This product is for waterborne, solventborne, and radiation-curing formulations. Based on s...weiterlesen TEGO® Dispers 652 is a solvent- and APE-free pigment-wetting and dispersing additive. It is a clear to slightly hazy liquid concentrate of a fatty acid derivative. This product is for waterborne, solventborne, and radiation-curing formulations. Based on sustainable raw materials, TEGO® Dispers 652 reduces millbase viscosity and has good color intensity and gloss with inorganic pigments and fillers. This product can also be used for resin-based and resin-free pigment concentrates. verkürzen | Request Sample |
SIL-O-WET® 2052 NL-PA | Silberline Manufacturing Co., Inc. | SIL-O-WET® 2052 NL-PA is an aluminum pigment with a fine, coarse particle size. This product is treated with a chemical inhibitor to reduce reactions with water and is typically applied in aqueous flexographic and gravure ink formulations. This grade can ...weiterlesen SIL-O-WET® 2052 NL-PA is an aluminum pigment with a fine, coarse particle size. This product is treated with a chemical inhibitor to reduce reactions with water and is typically applied in aqueous flexographic and gravure ink formulations. This grade can be also be used in combination with transparent pigments and dyes to produce a spectrum of bright, clean metallic colors. SIL-O-WET® 2052 NL-PA is non-leafing and 64% non-volatile by weight. verkürzen | |
Eco-Rez™ 9760 A | Lawter | Eco-Rez™ 9760 A is a phenol formaldehyde-free resin that provides an increased level of renewable content in line with a more sustainable approach to chemistry formulations. As part of the new products in the Eco-Rez™ line, the resin offers sharper print ...weiterlesen Eco-Rez™ 9760 A is a phenol formaldehyde-free resin that provides an increased level of renewable content in line with a more sustainable approach to chemistry formulations. As part of the new products in the Eco-Rez™ line, the resin offers sharper print images and better rheological stability and water balance stability during long and high-speed press runs. Eco-Rez™ 9760 A is suitable for all offset inks including coldset, heatset and sheet-fed applications. verkürzen | |
NANOCRYL® C 150 | Evonik Operations GmbH, BL Coating Additives | NANOCRYL® C 150 is a clear to slightly yellow liquid, 50 wt.-% silica nanoparticles in trimethylolpropanetriacrylate (TMPTA) that is used for solventborne and solvent-free radiation-curing formulations. It has high surface hardness and high crosslinking d...weiterlesen NANOCRYL® C 150 is a clear to slightly yellow liquid, 50 wt.-% silica nanoparticles in trimethylolpropanetriacrylate (TMPTA) that is used for solventborne and solvent-free radiation-curing formulations. It has high surface hardness and high crosslinking density in overprint varnishes and plastic top coats. It has excellent enhanced scratch and abrasion resistance with no decrease of transparency. It has great adhesion on aluminum/glass, reduced cure shrinkage, and a barrier effect. It also has improved dirt shedding and adhesion on plastic. verkürzen | Request Sample |
EBECRYL® 657 | Allnex | EBECRYL® 657 is a polyester tetraacrylate developed specifically for ultraviolet light (UV) and electron beam (EB) cured lithographic ink formulations. It provides the proper hydrophilic-lipophilic balance necessary for lithography, good pigment wetting, ...weiterlesen EBECRYL® 657 is a polyester tetraacrylate developed specifically for ultraviolet light (UV) and electron beam (EB) cured lithographic ink formulations. It provides the proper hydrophilic-lipophilic balance necessary for lithography, good pigment wetting, and low misting. It can be blended with epoxy acrylates or EBECRYL® 436 or EBECRYL® 438 to increase cure speed. EBECRYL® 657 is recommended for: lithographic inks and varnishes, coatings on paper, metal, and plastic, and pigment grinding vehicles. verkürzen | Request Sample |
TEGO® Protect 5000 N | Evonik Operations GmbH, BL Coating Additives | TEGO® Protect 5000 N is a liquid, anti-graffiti additive with utmost effectiveness. It is a solvent-free, hydroxy-functional polydimethyl siloxane with good marker resistance and an anti-graffiti effect. TEGO® Protect 5000 N also has an outstanding hydro- and oleophobic properties for 2-pack coatings based on acrylic/isocyanate and polyester/isocyanate applications. TEGO® Protect 5000 N is dilutable by esters, ketones and glycol ethers and is recommended to be added at the grind stage in pigmented formulation...weiterlesen TEGO® Protect 5000 N is a liquid, anti-graffiti additive with utmost effectiveness. It is a solvent-free, hydroxy-functional polydimethyl siloxane with good marker resistance and an anti-graffiti effect. TEGO® Protect 5000 N also has an outstanding hydro- and oleophobic properties for 2-pack coatings based on acrylic/isocyanate and polyester/isocyanate applications. TEGO® Protect 5000 N is dilutable by esters, ketones and glycol ethers and is recommended to be added at the grind stage in pigmented formulations. verkürzen | Request Sample |
TEGO® Foamex 815 N | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 815 N is a defoamer emulsion with a broad application range and excellent effectiveness. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer which contains fumed silica. TEGO® Foamex 815 N has strong defoaming characteristics with very good compatibility. It is widely applicable, particularly in formulation...weiterlesen TEGO® Foamex 815 N is a defoamer emulsion with a broad application range and excellent effectiveness. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer which contains fumed silica. TEGO® Foamex 815 N has strong defoaming characteristics with very good compatibility. It is widely applicable, particularly in formulations based on acrylate, styrene-acrylate or 2- pack epoxy binders. It is highly suitable for flooring applications and is also suitable for brush/roller applications. verkürzen | Request Sample |
CYMEL® 303 LF | Allnex | CYMEL® 303 LF resin is a highly methylated, monomeric melamine crosslinker supplied in liquid form. Its high extent of alkylation and low tendency to self-condense makes this product a highly effective crosslinking agent for a broad range of applications such as can, container, automotive and general industrial coatings. While CYMEL® 303 LF resin is insoluble in water, it shows excellent compatibility with water-soluble backbone polymers and provides very good stability in amine-stabilized waterborne formulation...weiterlesen CYMEL® 303 LF resin is a highly methylated, monomeric melamine crosslinker supplied in liquid form. Its high extent of alkylation and low tendency to self-condense makes this product a highly effective crosslinking agent for a broad range of applications such as can, container, automotive and general industrial coatings. While CYMEL® 303 LF resin is insoluble in water, it shows excellent compatibility with water-soluble backbone polymers and provides very good stability in amine-stabilized waterborne formulations. verkürzen | Request Sample |
BENTONE® NP-10 | Elementis | BENTONE® NP-10 is a solventborne, high- efficiency, easy-to-use organoclay. It is an ideal rheological additive for inks formulated with petroleum/vegetable oils and low polarity solvents. | |
Antiespumante E (Ecológico) | Opalion | ANTIESPUMANTE E (Ecológico) is necessary to reduce pollution by solvents to meet increasingly stringent environmental standards. This defoamer was formulated with solvents of lower toxicity trying to balance the other properties. | |
ADDITOL® P 966 | Allnex | ADDITOL® P 966 is a catalyst masterbatch for use in TGIC or ARALDITE® PT-910 systems. This resin contains 5% active ingredient in a superdurable polyester resin matrix. ADDITOL® P 966 is easily handled and greatly improves dispersion of the catalyst in powder coating formulation...weiterlesen ADDITOL® P 966 is a catalyst masterbatch for use in TGIC or ARALDITE® PT-910 systems. This resin contains 5% active ingredient in a superdurable polyester resin matrix. ADDITOL® P 966 is easily handled and greatly improves dispersion of the catalyst in powder coating formulations when mixed with superdurable resins. This material can also be used with CRYLCOAT® 4420-0 and CRYLCOAT® 4430-0 at varying levels in dry-blend systems to achieve adjustable low gloss values. verkürzen | Request Sample |
CYMEL® 1123 | Allnex | CYMEL® 1123 resin is a highly methylated/ethylated benzoguanamine resin developed primarily for use as a crosslinking agent in electrocoating and conventional coatings requiring high detergent and chemical resistance. Its excellent balance between adhesion and film flexibility, especially after several cure cycles, makes it particularly well suited for can coating applications. While it is insoluble in water, this product shows excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulation...weiterlesen CYMEL® 1123 resin is a highly methylated/ethylated benzoguanamine resin developed primarily for use as a crosslinking agent in electrocoating and conventional coatings requiring high detergent and chemical resistance. Its excellent balance between adhesion and film flexibility, especially after several cure cycles, makes it particularly well suited for can coating applications. While it is insoluble in water, this product shows excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulations. verkürzen | Request Sample |
CYMEL® 251 | Allnex | CYMEL® 251 Resin is a novel melamine-formaldehyde crossliknking agent of the mixed ether class. It possesses a lower level of alkylation then other mixed ethers, thus improving its adaptability to waterbone coating formulations. Waterbone systems based on...weiterlesen CYMEL® 251 Resin is a novel melamine-formaldehyde crossliknking agent of the mixed ether class. It possesses a lower level of alkylation then other mixed ethers, thus improving its adaptability to waterbone coating formulations. Waterbone systems based on CYMEL® 251 resin exhibit rapid cure response with improved water resistance compared with coatings based on conventional methylated melamine resins. In addition, coatings containing CYMEL® 251 resin maintain the excellent appearance properties charasteristic of mixed ether crosslinkers. verkürzen | Request Sample |
TEGO® Wet 270 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet 270 is a highly effective substrate wetting additive. It is a clear liquid polyether siloxane copolymer with excellent anti-crater effect with flow promotion in waterborne, solventborne, and radiation-curing formulations. TEGO® Wet 270 is suitab...weiterlesen TEGO® Wet 270 is a highly effective substrate wetting additive. It is a clear liquid polyether siloxane copolymer with excellent anti-crater effect with flow promotion in waterborne, solventborne, and radiation-curing formulations. TEGO® Wet 270 is suitable for clear coat, radiation-curing, pigmented, and waterborne systems. It can be used in both the primer/basecoat and the topcoat for lacquer coats. It is recommended that the addition of this product to the coating be at the let-down stage and as supplied. verkürzen | Request Sample |
TEGO® Rad 2500 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2500 is a radically crosslinkable glide, slip, and anti-blocking additive with good deaerating effects. It is a clear liquid silicone acrylate, radiation-curing defoaming additive which improves mechanical resistance and reduces friction. It is especially suitable for pigmented formulation...weiterlesen TEGO® Rad 2500 is a radically crosslinkable glide, slip, and anti-blocking additive with good deaerating effects. It is a clear liquid silicone acrylate, radiation-curing defoaming additive which improves mechanical resistance and reduces friction. It is especially suitable for pigmented formulations. TEGO® Rad 2500 can be added to the coating as supplied or as a predilution either in the grind stage or during the let-down stage. Predilution in a suitable solvent simplifies dosage and incorporation of this product. verkürzen | Request Sample |
TEGO® Wet 280 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet 280 is a highly effective substrate wetting additive with good flow promotion. It is a clear liquid polyether siloxane copolymer with good compatibility and good atomization with spray applications in co-solvent containing formulations. TEGO® We...weiterlesen TEGO® Wet 280 is a highly effective substrate wetting additive with good flow promotion. It is a clear liquid polyether siloxane copolymer with good compatibility and good atomization with spray applications in co-solvent containing formulations. TEGO® Wet 280 is suitable for clear coat, pigmented, and waterborne systems and can be used in the primer/basecoat and the topcoat for lacquer coats. It is recommended that at the let-down stage, TEGO® Wet 280 be added to the coating as supplied. verkürzen | Request Sample |
ELFTEX® 320 | Cabot Corporation - Additives | ELFTEX® 320 is a low structure specialty carbon black pigment that is formulated to impart high gloss, blue undertone and moderate color strength for use in lithographic gloss inks. | |
REGAL® 330 | Cabot Corporation - Additives | REGAL® 330 is a low structure specialty black pigment that is formulated to impart high gloss and good color strength. This product is well suited for use in lithographic gloss inks. | |
REGAL® 330R | Cabot Corporation - Additives | REGAL® 330R is a low structure specialty black pigment that is formulated to impart high gloss and good color strength. This product is well suited for use in lithographic gloss inks. | |
LAPONITE® RDS | BYK | LAPONITE® RDS is a synthetic layered silicate incorporating an inorganic polyphosphate peptiser. It hydrates and swells in water to give clear and colourless colloidal dispersions of low viscosity known as sols. At 10% concentration in water, these will remain free flowing for 24 hours. On addition of small quantities of electrolyte, highly thixotropic gels are formed rapidly. This product is used to impart a shear sensitive structure to a wide range of waterborne formulation...weiterlesen LAPONITE® RDS is a synthetic layered silicate incorporating an inorganic polyphosphate peptiser. It hydrates and swells in water to give clear and colourless colloidal dispersions of low viscosity known as sols. At 10% concentration in water, these will remain free flowing for 24 hours. On addition of small quantities of electrolyte, highly thixotropic gels are formed rapidly. This product is used to impart a shear sensitive structure to a wide range of waterborne formulations including household and industrial surface coatings, cleansers, agrochemical and horticultural products. verkürzen | |
TEGO® Glide 432 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide 432 is a highly effective flow and glide additive with superior substrate wetting properties in UV systems. It is a polyether siloxane copolymer clear liquid which becomes hazy and thickens at temperatures below 15 °C, but returns to clear and pourable after warming. TEGO® Glide 432 is suitable for clear coat, pigmented, solventborne, and radiation-curing formulation...weiterlesen TEGO® Glide 432 is a highly effective flow and glide additive with superior substrate wetting properties in UV systems. It is a polyether siloxane copolymer clear liquid which becomes hazy and thickens at temperatures below 15 °C, but returns to clear and pourable after warming. TEGO® Glide 432 is suitable for clear coat, pigmented, solventborne, and radiation-curing formulations. Addition of this product to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation. verkürzen | Request Sample |
TEGO® VariPlus DS 50 | Evonik Operations GmbH, BL Coating Additives | TEGO® VariPlus DS 50 is a anionic dispersion of a polyurethane polyol resin for waterborne coatings and pigment concentrates delivered in liquid form. Particularly for waterborne formulations, this product can be applied for pigment concentrates, industri...weiterlesen TEGO® VariPlus DS 50 is a anionic dispersion of a polyurethane polyol resin for waterborne coatings and pigment concentrates delivered in liquid form. Particularly for waterborne formulations, this product can be applied for pigment concentrates, industrial coatings, wood and furniture coatings, architectural coatings, and leather coatings. TEGO® VariPlus DS 50 improves pigment wetting and stabilization as well as the hardness, gloss, and blocking resistance. It also improves the adhesion on many plastics such as PC, ABS, PS, PA, PMMA, PVC, Noryl. verkürzen | Request Sample |
PHENODUR® VPW 1942/52WA | Allnex | PHENODUR® VPW 1942/52WA is a formulated phenolic/epoxide system, intended as sole-binder for the interior and exterior coating of metallic packaging materials and for corrosion resistant industrial stoving systems. | Request Sample |
REGAL® 660 | Cabot Corporation - Additives | REGAL® 660 is a low structure specialty black pigment that is formulated to impart high gloss and high jetness. This product is well suited for use in printing inks, coatings and general dispersions. | |
RESYDROL® VAY 6096w/39WA | Allnex | Resydrol® VAY 6096W/39WA is a short-oil, oxidatively drying, acrylic modified alkyd resin as an aqueous emulsion. It is a sole binder to formulate extremely fast drying industrial coating systems. | Request Sample |
SPARKLE SILVER Elite 012 Aluminum Paste | Silberline Manufacturing Co., Inc. | SPARKLE SILVER Elite 012 is a fine particle size, silver dollar aluminum flake pigment. When properly formulated, SPARKLE SILVER Elite 012 exhibits a smooth, highly reflective finish. | |
Eco-Rez™ 9715 A | Lawter | Eco-Rez™ 9715 A is a phenol formaldehyde-free resin with a medium structure in a resin which provides limited solubility in aliphatic ink solvents.The product is part of a new generation of phenol-free resins with improved performance based on a more environmentally sustainable approach to formulation...weiterlesen Eco-Rez™ 9715 A is a phenol formaldehyde-free resin with a medium structure in a resin which provides limited solubility in aliphatic ink solvents.The product is part of a new generation of phenol-free resins with improved performance based on a more environmentally sustainable approach to formulations. High-speed transfer, sharp print images and water balance stability are part of the added benefits of the new technology. Eco-Rez™ 9715 A is suitable for all offset inks including coldset, heatset and sheet-fed applications. verkürzen | |
SILIKOPHEN® P 50/X | Evonik Operations GmbH, BL Coating Additives | SILIKOPHEN® P 50/X is a methylphenyl polysiloxane resin produced for anti-corrosion coatings. It has an appearance of a clear to slightly hazy liquid used for anti-corrosion coatings for mufflers, ovens, chimneys, oven inserts, barbeques, and electric and gas heaters. It also can be used with metallic pigments and special formulation...weiterlesen SILIKOPHEN® P 50/X is a methylphenyl polysiloxane resin produced for anti-corrosion coatings. It has an appearance of a clear to slightly hazy liquid used for anti-corrosion coatings for mufflers, ovens, chimneys, oven inserts, barbeques, and electric and gas heaters. It also can be used with metallic pigments and special formulations to obtain continuous heat-resistance of up to 650°C. Some special features of SILIKOPHEN® P 50/X include good compatibility with organic resins, and it has good air-drying properties. verkürzen | Request Sample |
TEGO® Dispers 655 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 655 is pigment-wetting and dispersing additive. It is a clear to a slighlty hazy brownish liquid modified polyether with groups of high pigment affinity. This product is used for universal colorants, waterborne, solventborne, radiation-curing formulation...weiterlesen TEGO® Dispers 655 is pigment-wetting and dispersing additive. It is a clear to a slighlty hazy brownish liquid modified polyether with groups of high pigment affinity. This product is used for universal colorants, waterborne, solventborne, radiation-curing formulations. TEGO® Dispers 655 stabilizes aluminum pigments and improves colorant acceptance of solventborne paints. It has the highest viscosity reduction with inorganic pigments and fillers and good reduction with organic and carbon blacks. It also has good color intensity/gloss with inorganic pigments and fillers. verkürzen | Request Sample |
TEGO® VariPlus SK | Evonik Operations GmbH, BL Coating Additives | TEGO® VariPlus SK is a hard polyol resin for solventborne coatings and printing inks. Particularly for solventborne formulations, this product can be applied for flexo and gravure inks, ball-point pen inks, industrial coatings, and wood and furniture coat...weiterlesen TEGO® VariPlus SK is a hard polyol resin for solventborne coatings and printing inks. Particularly for solventborne formulations, this product can be applied for flexo and gravure inks, ball-point pen inks, industrial coatings, and wood and furniture coatings. TEGO® VariPlus SK has high light and heat resistance and improves the hardness, gloss, and blocking resistance. It also improves the color strength of organic pigments and the adhesion on many plastics and metals. It increases drying speed and may increase the solids content. verkürzen | Request Sample |
SETALUX® 27-1597 | Allnex | SETALUX® 27-1597 is an acrylic polyol for use in combination with aliphatic polyisocyanates. When properly formulated, this resin will offer ease of application, very good film properties and superior outdoor exposure performance. | Request Sample |
REGAL® 250R | Cabot Corporation - Additives | REGAL® 250R is a blue tone, low vehicle carbon black that is formulated for good color strength, high load base, and high gloss. This product is well suited for use in printing ink applications. | |
REGAL® 350R | Cabot Corporation - Additives | REGAL® 350R is a low structure specialty black pigment that is formulated to impart a blue tone, and maintain good gloss and moderate color strength. This product is well suited for use in lithographic gloss inks. | |
REGAL® 660R | Cabot Corporation - Additives | REGAL® 660R is a low structure, high tinting strength regular color printing black. It is formulated for liquid and powder systems. This product is well suited for coloring leather articles, dispersions, coatings, and inks. | |
TEGO® Wet 500 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet 500 is a highly effective substrate wetting additive with good flow promotion. It is a clear liquid non-ionic organic surfactant ideal for spray application. It is universally applicable, silicone-free, and has low foam. It is suitable for clear coat, pigmented, radiation-curing, and waterborne systems. TEGO® Wet 500's addition to the coating can be as supplied or as a predilution. It is suitable for for addition during the let-down stage, but is recommended during the grind stage for pigmented formulation...weiterlesen TEGO® Wet 500 is a highly effective substrate wetting additive with good flow promotion. It is a clear liquid non-ionic organic surfactant ideal for spray application. It is universally applicable, silicone-free, and has low foam. It is suitable for clear coat, pigmented, radiation-curing, and waterborne systems. TEGO® Wet 500's addition to the coating can be as supplied or as a predilution. It is suitable for for addition during the let-down stage, but is recommended during the grind stage for pigmented formulations. verkürzen | Request Sample |
Dynoadd® D-963 | Dynoadd by Dynea | Dynoadd® D-963 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-963 provides excellent pigment affinity and effective steric stabilization. The rapid initial pig...weiterlesen Dynoadd® D-963 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-963 provides excellent pigment affinity and effective steric stabilization. The rapid initial pigment wetting and deflocculation achieved with Dynoadd® D-963 results in stable dispersions with low particle size. Pigment concentrates produced using Dynoadd® D-963 have low viscosity and give excellent color strength and gloss in a wide variety of water-borne industrial coatings and printing inks. verkürzen | |
CRYLCOAT® 2696-6 | Allnex | CRYLCOAT® 2696-6 is a high reactive, tribo enhanced carboxyl functional polyester resin for use with 5% Primid® XL 552 in low bake (10 min x 160°C) or fast cure (2 min x 180°C) formulations for the industrial coatings seg-ment. Coatings based on CRYLCOAT®...weiterlesen CRYLCOAT® 2696-6 is a high reactive, tribo enhanced carboxyl functional polyester resin for use with 5% Primid® XL 552 in low bake (10 min x 160°C) or fast cure (2 min x 180°C) formulations for the industrial coatings seg-ment. Coatings based on CRYLCOAT® 2696-6 exhibit excellent blooming-resistance at low temperatures and good overall properties. CRYLCOAT® 2696-6 belongs to the ECOWISE™ CHOICE product range for selected applications. (Contact your allnex representative for more information). verkürzen | Request Sample |
TEGO® Wet 505 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet 505 is a substrate wetting additive with defoaming properties. It is a highly dynamic, silicone-free, non-ionic, clear liquid organic surfactant. It is universally applicable, has low foam, and has good reduction of dynamic surface tension. TEGO® Wet 505 is suitable for clear coat, pigmented, and waterborne systems. Addition of this product to the coating can be as supplied or as a predilution during the let-down stage. However, it is recommended the addition of TEGO® Wet 505 in pigmented formulation...weiterlesen TEGO® Wet 505 is a substrate wetting additive with defoaming properties. It is a highly dynamic, silicone-free, non-ionic, clear liquid organic surfactant. It is universally applicable, has low foam, and has good reduction of dynamic surface tension. TEGO® Wet 505 is suitable for clear coat, pigmented, and waterborne systems. Addition of this product to the coating can be as supplied or as a predilution during the let-down stage. However, it is recommended the addition of TEGO® Wet 505 in pigmented formulations, be during the grind stage. verkürzen | Request Sample |
TEGO® Rad 2650 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2650 is a highly effective release additive for radiation-curing formulations. It is a radically cross-linkable, clear to slightly hazy liquid silicone acrylate. TEGO® Rad 2650 can be used for radiation-curing printing inks and overprint varnish...weiterlesen TEGO® Rad 2650 is a highly effective release additive for radiation-curing formulations. It is a radically cross-linkable, clear to slightly hazy liquid silicone acrylate. TEGO® Rad 2650 can be used for radiation-curing printing inks and overprint varnishes, silk screen inks, and (litho) offset printing inks. It improves scratch and marker resistance with additional slip and deaerating activity. Addition of this product to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation of TEGO® Rad 2650. verkürzen | Request Sample |
SPARKLE SILVER ULTRA® 018LM Aluminum Paste | Silberline Manufacturing Co., Inc. | SPARKLE SILVER ULTRA® 018LM Aluminum Paste is a medium size aluminum flake with a round geometry. It presents an uncharacteristically smooth finish and near chrome-like appearance when properly formulated in specialty coatings. | |
EBECRYL® 8896 | Allnex | EBECRYL® 8896 is a revolutionary aliphatic urethane acrylate designed for application(s) requiring haptic properties (e.g. “soft touch/feel”). Films of EBECRYL®8896 cured via exposure to ultraviolet light (UV) or electron beam (EB) are tough, flexible, an...weiterlesen EBECRYL® 8896 is a revolutionary aliphatic urethane acrylate designed for application(s) requiring haptic properties (e.g. “soft touch/feel”). Films of EBECRYL®8896 cured via exposure to ultraviolet light (UV) or electron beam (EB) are tough, flexible, and resistant to yellowing. EBECRYL®8896 is compatible with variety of fillers, pigments, waxes, and polymeric beads allowing formulator maximum formulating latitude to create a number of haptic properties ranging from a velvety/silky feel to EBECRYL®8896’s intrinsic rubbery feel. verkürzen | Request Sample |
EBECRYL® 350 | Allnex | EBECRYL® 350 is a silicone diacrylate that improves slip, substrate wetting, and coating flow and leveling when used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB). Cured films containing EBECRYL® 350 will exhibit a s...weiterlesen EBECRYL® 350 is a silicone diacrylate that improves slip, substrate wetting, and coating flow and leveling when used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB). Cured films containing EBECRYL® 350 will exhibit a smooth, tack free surface, with good blocking resistance. Because of its acrylate functionality, the silicone cures into the polymeric backbone, thus eliminating the migration that free silicones often display in coatings. EBECRYL® 350 is recommended for use in: overprint varnishes, clear coatings on paper, plastics and metal, and release coatings. verkürzen | Request Sample |
Reflex™ Fine Gray Pearl RC-9011D | CQV Co., Ltd. | Reflex™ Fine Gray Pearl RC-9011D, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a gray, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulation...weiterlesen Reflex™ Fine Gray Pearl RC-9011D, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a gray, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. verkürzen | |
Reflex™ Fine Blue Pearl RC-7881D | CQV Co., Ltd. | Reflex™ Fine Blue Pearl RC-7881D, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a blue, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulation...weiterlesen Reflex™ Fine Blue Pearl RC-7881D, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a blue, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. verkürzen | |
Reflex™ Passion Red RC-6640K | CQV Co., Ltd. | Reflex™ Passion Red RC-6640K, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a red, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulation...weiterlesen Reflex™ Passion Red RC-6640K, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a red, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. verkürzen | |
Reflex™ Splendor Orange Pearl RC-7021K | CQV Co., Ltd. | Reflex™ Splendor Orange Pearl RC-7021K, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a orange, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulation...weiterlesen Reflex™ Splendor Orange Pearl RC-7021K, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a orange, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. verkürzen | |
Reflex™ Splendor Red Pearl RC-7441K | CQV Co., Ltd. | Reflex™ Splendor Red Pearl RC-7441K, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a red, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulation...weiterlesen Reflex™ Splendor Red Pearl RC-7441K, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a red, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. verkürzen | |
Reflex™ Splendor Sky Blue Pearl RC-7885K | CQV Co., Ltd. | Reflex™ Splendor Sky Blue Pearl RC-7885K, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a blue, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulation...weiterlesen Reflex™ Splendor Sky Blue Pearl RC-7885K, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a blue, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. verkürzen | |
Reflex™ Gray Pearl RC-9011S | CQV Co., Ltd. | Reflex™ Gray Pearl RC-9011S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a gray, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulation...weiterlesen Reflex™ Gray Pearl RC-9011S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a gray, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. verkürzen | |
Reflex™ Green Pearl RC-9091S | CQV Co., Ltd. | Reflex™ Green Pearl RC-9091S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a green, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulation...weiterlesen Reflex™ Green Pearl RC-9091S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a green, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. verkürzen | |
Reflex™ Real White RC-1000S | CQV Co., Ltd. | Reflex™ Real White RC-1000S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a white, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulation...weiterlesen Reflex™ Real White RC-1000S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a white, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. verkürzen | |
Reflex™ Goldenbell Color Pearl RC-7001S | CQV Co., Ltd. | Reflex™ Goldenbell Color Pearl RC-7001S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a yellowish, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulation...weiterlesen Reflex™ Goldenbell Color Pearl RC-7001S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a yellowish, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. verkürzen | |
Reflex™ Gray Gold Pearl RC-7011S | CQV Co., Ltd. | Reflex™ Gray Gold Pearl RC-7011S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a gray, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulation...weiterlesen Reflex™ Gray Gold Pearl RC-7011S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a gray, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. verkürzen | |
Reflex™ Orange Pearl RC-7021S | CQV Co., Ltd. | Reflex™ Orange Pearl RC-7021S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a orange, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulation...weiterlesen Reflex™ Orange Pearl RC-7021S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a orange, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. verkürzen | |
Reflex™ Red Pearl RC-7441S | CQV Co., Ltd. | Reflex™ Red Pearl RC-7441S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a red, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulation...weiterlesen Reflex™ Red Pearl RC-7441S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a red, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. verkürzen | |
Reflex™ Deep Blue Pearl RC-7883S | CQV Co., Ltd. | Reflex™ Deep Blue Pearl RC-7883S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a blue, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulation...weiterlesen Reflex™ Deep Blue Pearl RC-7883S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a blue, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. verkürzen | |
Reflex™ Sky Blue Pearl RC-7885S | CQV Co., Ltd. | Reflex™ Sky Blue Pearl RC-7885S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a blue, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulation...weiterlesen Reflex™ Sky Blue Pearl RC-7885S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a blue, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. verkürzen | |
Reflex™ Evergreen Pearl RC-7991S | CQV Co., Ltd. | Reflex™ Evergreen Pearl RC-7991S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a green, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulation...weiterlesen Reflex™ Evergreen Pearl RC-7991S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a green, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. verkürzen | |
Reflex™ Blue Pearl R-7881S | CQV Co., Ltd. | Reflex™ Blue Pearl R-7881S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a blue, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulation...weiterlesen Reflex™ Blue Pearl R-7881S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a blue, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. verkürzen | |
Reflex™ Super Onyx Black RC-1010S | CQV Co., Ltd. | Reflex™ Super Onyx Black RC-1010S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a brilliant black, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulation...weiterlesen Reflex™ Super Onyx Black RC-1010S, part of Reflex™ Color Pigment Coated Pearl, is a two-color effect pigment that has coated pearlescent pigment surface with pre-dispersed inorganic or organic colorant with the appearance of a brilliant black, free-flowing powder. It conserves the feel of the interference pigment by coating the pearl pigment with numerous colors of Colorant, which also decreases the need for added mixing of colors. Because this product is unstable in some salts and alkali, it should not be used in alkaline formulations, although it is applicable in various fields of industry. verkürzen | |
VESTANAT® EP-MF 203 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 203 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2coatings. | Request Sample |
SILIKOPHEN® P 80/X | Evonik Operations GmbH, BL Coating Additives | SILIKOPHEN® P 80/X is a solvent-borne binder for heat-resistant anti-corrosion paints. It has an appearance of clear to slightly hazy liquid which is used for anti-corrosion coatings for mufflers, ovens, chimneys, oven inserts, barbeques, and electric and gas heaters. Some special features of SILIKOPHEN® P 80/X include excellent air-drying properties and good compatibility with organic resins. It also can be used with metallic pigments and special formulation...weiterlesen SILIKOPHEN® P 80/X is a solvent-borne binder for heat-resistant anti-corrosion paints. It has an appearance of clear to slightly hazy liquid which is used for anti-corrosion coatings for mufflers, ovens, chimneys, oven inserts, barbeques, and electric and gas heaters. Some special features of SILIKOPHEN® P 80/X include excellent air-drying properties and good compatibility with organic resins. It also can be used with metallic pigments and special formulations to obtain continuous heat-resistance of up to 650 °C, but is limited miscibility with aromatic hydrocarbons. verkürzen | Request Sample |
Carbowet® GA-211 Surfactant | Evonik Operations GmbH, BL Coating Additives | Carbowet® GA-211 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-211 surfactant can provide exceptional dry pigment w...weiterlesen Carbowet® GA-211 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-211 surfactant can provide exceptional dry pigment wetting and deaeration and optimal milling efficiency, allowing for faster and stronger color development. The combination of properties provided by Carbowet® GA-211 surfactant can be used in a variety of applications for dynamic wetting, compatibilization, emulsification, and stabilization where an easy-to-incorporate liquid additive is desired. Carbowet® GA-211 surfactant offers low foam and strong dynamic wetting properties. verkürzen | Request Sample |
Lucidene 603 | Hydrite Chemical Co. | Lucidene 603 is a soft, film forming polymer formulated to be used as a modifier in overprint varnishes and to provide adhesion to film and foil substrates. It has good pigment wetting and viscosity stability for use in the grind stage of dry pigment disp...weiterlesen Lucidene 603 is a soft, film forming polymer formulated to be used as a modifier in overprint varnishes and to provide adhesion to film and foil substrates. It has good pigment wetting and viscosity stability for use in the grind stage of dry pigment dispersions. verkürzen | |
DAOTAN® VTW 2229/40WANMP | Allnex | Daotan® VTW 2229/40WANMP is a hydroxy functional polyurethane dispersion with shear stability, pigment compatibility giving highly flexible films when cured with isocyanates as well as melamine resins. It is suited for formulating aqueous primer surfacers...weiterlesen Daotan® VTW 2229/40WANMP is a hydroxy functional polyurethane dispersion with shear stability, pigment compatibility giving highly flexible films when cured with isocyanates as well as melamine resins. It is suited for formulating aqueous primer surfacers. verkürzen | Request Sample |
EBECRYL® 3639 | Allnex | EBECRYL® 3639 is a special epoxy acrylate exhibiting good flexibility and very high reactivity. It is especially recommended to formulate radiation curable coatings and inks with good flexibility, very high reactivity and outstanding scratch and chemical ...weiterlesen EBECRYL® 3639 is a special epoxy acrylate exhibiting good flexibility and very high reactivity. It is especially recommended to formulate radiation curable coatings and inks with good flexibility, very high reactivity and outstanding scratch and chemical resistances. verkürzen | Request Sample |
VESTANAT® EP-MF 204 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 204 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2 coatings. | Request Sample |
NQ SOLVE | Companhia Nitro Quimica Brasileira | NQ SOLVE is a line of products designed to allows our customers to achieve productivity improvements in the process of dissolving nitrocellulose in the cotton format. By choosing the NQ SOLVE line, our customers have access to customized solutions and can...weiterlesen NQ SOLVE is a line of products designed to allows our customers to achieve productivity improvements in the process of dissolving nitrocellulose in the cotton format. By choosing the NQ SOLVE line, our customers have access to customized solutions and can promptly formulate clear and pigmented basecoats. The NQ SOLVE line consists of solutions derived from our nitrocellulose portfolio with several options in solvents, such as ethyl acetate, butyl acetate, methyl ethyl ketone, xylene and acetone, among others. The solutions can be formulated according to customer-specific requirements in all applications where the nitrocellulose is used. verkürzen | |
Dynoadd® P-506 | Dynoadd by Dynea | Dynoadd® P-506 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-506 has a particle size of 6 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulation...weiterlesen Dynoadd® P-506 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-506 has a particle size of 6 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. verkürzen | |
Dynoadd® P-510 | Dynoadd by Dynea | Dynoadd P-510® is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-510 has a particle size of 10 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulation...weiterlesen Dynoadd P-510® is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-510 has a particle size of 10 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. verkürzen | |
Dynoadd® P-515 | Dynoadd by Dynea | Dynoadd® P-515 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-515 has a particle size of 15 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulation...weiterlesen Dynoadd® P-515 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-515 has a particle size of 15 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. verkürzen | |
Dynoadd® P-520 | Dynoadd by Dynea | Dynoadd® P-520 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-520 has a particle size of 20 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulation...weiterlesen Dynoadd® P-520 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-520 has a particle size of 20 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. verkürzen |