| ULTRAPEG® 1000 | Indorama Ventures |
|
ULTRAPEG® 1000 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It is a solid, with an average molecular weight of 950-1050, a hydroxyl value of 107-118mg KOH/g, and a wa...weiterlesen
ULTRAPEG® 1000 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It is a solid, with an average molecular weight of 950-1050, a hydroxyl value of 107-118mg KOH/g, and a water content of 0.5% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency.
This product is ideally used for leathers, textiles, and paints. ULTRAPEG® 1000 may also be formulated in creams, lotions, and moisturizers, cream without rinsing for hair, deodorants, products for skin treatment and soaps verkürzen
Compliance Highlights Available
|
|
| ULTRAPEG® 1500 F | Indorama Ventures |
|
ULTRAPEG® 1500 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 1350-1595, a hydroxyl value...weiterlesen
ULTRAPEG® 1500 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 1350-1595, a hydroxyl value of 70-83mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency.
This product is ideally used for leathers, detergents, lubricants, textiles, and paints. ULTRAPEG® 1500 F may also be formulated in creams, lotions, and moisturizers, cream without rinsing for hair, deodorants, products for skin treatment and soaps, products for makeup (lipsticks, shadows, foundations) and toothpastes. verkürzen
Compliance Highlights Available
|
|
| ULTRAPEG® 200 | Indorama Ventures |
|
ULTRAPEG® 200 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 190-210, a hydroxyl value of 5...weiterlesen
ULTRAPEG® 200 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 190-210, a hydroxyl value of 535-590mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency.
This product is ideally used for leathers, detergents, lubricants, and paints. ULTRAPEG® 200 may also be used in bath oils, creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations), shampoos, hair spray and fragrances. verkürzen
Compliance Highlights Available
|
|
| ULTRAPEG® 300 | Indorama Ventures |
|
ULTRAPEG® 300 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 285-315, a hydroxyl value of 3...weiterlesen
ULTRAPEG® 300 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 285-315, a hydroxyl value of 356-394mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency.
This product is ideally used for agrochemical, ceramic, leathers, lubricants, paints, textiles, and paints. ULTRAPEG® 300 may also be used in creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations) leave in conditioners, shampoos, deodorant and hair spray. verkürzen
Compliance Highlights Available
|
|
| ULTRAPEG® 400 | Indorama Ventures |
|
ULTRAPEG® 400 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 380-420, a hydroxyl value of 2...weiterlesen
ULTRAPEG® 400 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 380-420, a hydroxyl value of 267-295mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency.
This product is ideally used for agrochemical, rubber, ceramic, leathers, lubricants, textiles, and paints. ULTRAPEG® 400 may also be used in creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations), shampoos, soaps and hair spray. verkürzen
Compliance Highlights Available
|
|
| ULTRAPEG® 4000 F | Indorama Ventures |
|
ULTRAPEG® 4000 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 3600-4400, a hydroxyl value ...weiterlesen
ULTRAPEG® 4000 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 3600-4400, a hydroxyl value of 25-315mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency.
This product is ideally used for adhesives, agrochemical, rubber, ceramic, leathers, detergents and paints. ULTRAPEG® 4000 F may also be used in creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations) leave in conditioners, deodorant, products for skin treatment and soap. verkürzen
Compliance Highlights Available
|
|
| ULTRAPEG® 600 | Indorama Ventures |
|
ULTRAPEG® 600 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 570-630, a hydroxyl value of 17...weiterlesen
ULTRAPEG® 600 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 570-630, a hydroxyl value of 178-197mg KOH/g, and a water content of 0.25% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency.
This product is ideally used for adhesives, agrochemical, leathers, detergents, lubricants, personal care, textiles, and paints. ULTRAPEG® 600 may also be used in creams, lotions and moisturizers, products for skin treatment, hair spray and soap. verkürzen
Compliance Highlights Available
|
|
| ULTRAPEG® 6000 F | Indorama Ventures |
|
ULTRAPEG® 6000 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 5400-6600, a hydroxyl value ...weiterlesen
ULTRAPEG® 6000 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 5400-6600, a hydroxyl value of 17-20mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency. This product is ideally used for adhesives, agrochemical, rubber, ceramic, detergents and lubricants. ULTRAPEG® 6000 F may also be used in creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations) and soap. verkürzen
Compliance Highlights Available
|
|
| ULTRAPEG® 8000 | Indorama Ventures |
ULTRAPEG® 8000 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 7000-9000, a hydroxyl value of...weiterlesen
ULTRAPEG® 8000 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 7000-9000, a hydroxyl value of 12.5-16.0mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points, and hardness consistency. This product is ideally used for adhesives, agrochemicals, rubber, ceramic, and detergents. ULTRAPEG® 8000 may also be used products for makeup (lipsticks, shadows, foundations). verkürzen
Compliance Highlights Available
|
||
| ULTRASOLVE® P 240 A | Indorama Ventures |
ULTRASOLVE® P 240 A is a mixture of glycol ethers made up of monoethylene glycol phenyl ether (75% in weight) and of diethylene glycol phenyl ether (25% in weight). This product has a boiling point @ 760 mm Hg of 246ºC, a freezing point of 10.6ºC, and a d...weiterlesen
ULTRASOLVE® P 240 A is a mixture of glycol ethers made up of monoethylene glycol phenyl ether (75% in weight) and of diethylene glycol phenyl ether (25% in weight). This product has a boiling point @ 760 mm Hg of 246ºC, a freezing point of 10.6ºC, and a density, 25/25ºC of 1.09-1.13. It is a clear liquid, with little odor, stable in the presence of acids and alkalis, partially soluble in water and compatible with organic and inorganic compounds. This product has low evaporation rate, low VOC (Volatile Organic Compound) and high solvency power to dissolve polymers and pigments. Due to its characteristics of evaporation and solubility, it is used as coalescence agent for architectural paints, water-based adhesives and industrial latex. verkürzen
Compliance Highlights Available
|
