| Resiflow® L5 | Estron Chemical, Inc. | Resiflow® L-5 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it will eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel,...weiterlesen Resiflow® L-5 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it will eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel, and can improve the flexibility of coatings. Resiflow®L-5 can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. verkürzen | |
| Resiflow® LF | Estron Chemical, Inc. | Resiflow® LF is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. It is used to eliminate pinholes, craters, air entrapment, to improve flow and leveling (orange peel), and to improve the flexibility of coatings. Resiflow...weiterlesen Resiflow® LF is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. It is used to eliminate pinholes, craters, air entrapment, to improve flow and leveling (orange peel), and to improve the flexibility of coatings. Resiflow® LF can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. verkürzen | |
| Resiflow® LH-241 | Estron Chemical, Inc. | Resiflow® LH-241 is a specialty acrylic flow control additive that is in the reactive family of Resiflow® products. Typical dosage of Resiflow LH-241 is from 0.2 - 2%. Resiflow® LH-241 is a viscous liquid additive that can be incorporated into a variety o...weiterlesen Resiflow® LH-241 is a specialty acrylic flow control additive that is in the reactive family of Resiflow® products. Typical dosage of Resiflow LH-241 is from 0.2 - 2%. Resiflow® LH-241 is a viscous liquid additive that can be incorporated into a variety of binder chemistries to promote smoothness and gloss. Resiflow® LH-241 is well suited for coil coatings and clearcoats. verkürzen | |
| Resiflow® LV | Estron Chemical, Inc. | Resiflow® LV is a low viscosity acrylic polymer used in high solids, UV curing, coil, and other coating systems. It used for improving flow and leveling (orange peel). Resiflow® LV can also facilitate air release and minimize surface imperfections such as...weiterlesen Resiflow® LV is a low viscosity acrylic polymer used in high solids, UV curing, coil, and other coating systems. It used for improving flow and leveling (orange peel). Resiflow® LV can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® LV has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. verkürzen | |
| Resiflow® LV-67 | Estron Chemical, Inc. | Resiflow® LV-67 is an industry recognized standard acrylic polymer flow and leveling additive. It is used in general industrial and coil coating systems to improve air release and reduce solvent popping. Typical dosage of Resiflow® LV-67 is between 0.2-1....weiterlesen Resiflow® LV-67 is an industry recognized standard acrylic polymer flow and leveling additive. It is used in general industrial and coil coating systems to improve air release and reduce solvent popping. Typical dosage of Resiflow® LV-67 is between 0.2-1.5%, and as with any raw material, laboratory evaluation is recommended to determine the best processing method and the optimum concentration of the additive. verkürzen | |
| Resiflow® S | Estron Chemical, Inc. | Resiflow® S is an acrylic polymer cut 50% in Solvent 100 (Hi-Sol 10) used primarily as a flow and leveling agent. Resiflow® S should not negatively affect intercoat or recoat adhesion. The recommended level of usage is between 0.4 – 3% based on the binder...weiterlesen Resiflow® S is an acrylic polymer cut 50% in Solvent 100 (Hi-Sol 10) used primarily as a flow and leveling agent. Resiflow® S should not negatively affect intercoat or recoat adhesion. The recommended level of usage is between 0.4 – 3% based on the binder content. Resiflow® S is suitable for solvent borne coatings including primers and coil coatings. verkürzen | |
| RILSAN® D30 NAT | Arkema | RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...weiterlesen RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 21-27µm. verkürzen | Request Sample |
| RILSAN® D40 NAT | Arkema | RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...weiterlesen RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 27-31µm. verkürzen | Request Sample |
| RILSAN® D50 NAT | Arkema | RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...weiterlesen RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 40-46µm. verkürzen | Request Sample |
| RILSAN® D60 NAT | Arkema | RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...weiterlesen RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 43-55µm. verkürzen | Request Sample |
| RILSAN® D80 NAT | Arkema | RILSAN® D80 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...weiterlesen RILSAN® D80 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 95-105µm. verkürzen | Request Sample |
| SCD 1066 | Etna Tec Limited, LLC | SCD 1066 is a saturated, oil-free polyester resin intended for use in coil coating applications. This product has excellent flexibility and flow features, as well as excellent elongation for drawing. It is primarily used for coil coating topcoats and prim...weiterlesen SCD 1066 is a saturated, oil-free polyester resin intended for use in coil coating applications. This product has excellent flexibility and flow features, as well as excellent elongation for drawing. It is primarily used for coil coating topcoats and primers, but can also be used for adhesives, appliance coatings, and container coatings. verkürzen | |
| TEGO® AddBond 2220 ND | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond 2220 improves flexibility and adhesion of solventborne coatings. This soft polyester shows very good compatibility in non-polar formulations. | Request Sample |
| TEGO® AddBond HS | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond HS improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics. It is highly suitable for high-solid coatings. | Request Sample |
| TEGO® AddBond HS MPA | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond HS improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics. It is highly suitable for high-solid coatings. | Request Sample |
| TEGO® AddBond LP 1600 | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond LP 1600 is a solvent-free adhesion resin. It improves intercoat adhesion, increases the solids content, improves gloss, and offers wide solubility and compatibility. This product is recommended for can and coil coatings and industrial coatin...weiterlesen TEGO® AddBond LP 1600 is a solvent-free adhesion resin. It improves intercoat adhesion, increases the solids content, improves gloss, and offers wide solubility and compatibility. This product is recommended for can and coil coatings and industrial coatings. verkürzen | Request Sample |
| TEGO® AddBond LP 1611 | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond LP 1611 is a solvent-free adhesion resin. It improves the intercoat adhesion, corrosion protection, and gloss. This product offers excellent adhesion improvement on aluminium, steel and galvanized steel, as well as plastics, PVC, and ABS. It...weiterlesen TEGO® AddBond LP 1611 is a solvent-free adhesion resin. It improves the intercoat adhesion, corrosion protection, and gloss. This product offers excellent adhesion improvement on aluminium, steel and galvanized steel, as well as plastics, PVC, and ABS. It is recommended for can and coil coatings, industrial coatings, and 2-pack coatings. verkürzen | Request Sample |
| TEGO® AddBond LTW | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond LTW improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics. | Request Sample |
| TEGO® AddBond LTW-B | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond LTW-B improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics. | Request Sample |
| Ultrafine™ 1000 A | Lawter | Ultrafine™ 1000 A is a micronized polyethylene wax powder recommended when maximum mar, block and rub resistance are required along with elevated temperatures, slip and re-coatability. It offers a narrow particle size distribution to ease dispersion and c...weiterlesen Ultrafine™ 1000 A is a micronized polyethylene wax powder recommended when maximum mar, block and rub resistance are required along with elevated temperatures, slip and re-coatability. It offers a narrow particle size distribution to ease dispersion and create uniformity during processing. Ultrafine™ 1000 A is used in solvent and water-based flexographic and gravure inks, in sheet-fed, UV and metal deco applications and in wood, can, coil and powder coatings. verkürzen | |
| Ultrafine™ 1WLS A | Lawter | Ultrafine™ 1WLS A is a micronized ultrafine polytetrafluoroethylene powder made for abrasion, heat resistance and lubricity and is used to improve surface properties of coatings and printing inks. It can be used together with other waxes to improve perfor...weiterlesen Ultrafine™ 1WLS A is a micronized ultrafine polytetrafluoroethylene powder made for abrasion, heat resistance and lubricity and is used to improve surface properties of coatings and printing inks. It can be used together with other waxes to improve performance. Ultrafine™ 1WLS A is used in UV, metal deco and overprint varnishes, in heatset and sheet-fed inks and in can, coil and wood powder coatings. verkürzen |
